| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
|
Pull documentation updates from Jonathan Corbet:
"A moderatly busy cycle for development this time around.
- Some cleanup of the main index page for easier navigation
- Rework some of the other top-level pages for better readability
and, with luck, fewer merge conflicts in the future.
- Submit-checklist improvements, hopefully the first of many.
- New Italian translations
- A fair number of kernel-doc fixes and improvements. We have also
dropped the recommendation to use an old version of Sphinx.
- A new document from Thorsten on bisection
... and lots of fixes and updates"
* tag 'docs-6.9' of git://git.lwn.net/linux: (54 commits)
docs: verify/bisect: fixes, finetuning, and support for Arch
docs: Makefile: Add dependency to $(YNL_INDEX) for targets other than htmldocs
docs: Move ja_JP/howto.rst to ja_JP/process/howto.rst
docs: submit-checklist: use subheadings
docs: submit-checklist: structure by category
docs: new text on bisecting which also covers bug validation
docs: drop the version constraints for sphinx and dependencies
docs: kerneldoc-preamble.sty: Remove code for Sphinx <2.4
docs: Restore "smart quotes" for quotes
docs/zh_CN: accurate translation of "function"
docs: Include simplified link titles in main index
docs: Correct formatting of title in admin-guide/index.rst
docs: kernel_feat.py: fix build error for missing files
MAINTAINERS: Set the field name for subsystem profile section
kasan: Add documentation for CONFIG_KASAN_EXTRA_INFO
Fixed case issue with 'fault-injection' in documentation
kernel-doc: handle #if in enums as well
Documentation: update mailing list addresses
doc: kerneldoc.py: fix indentation
scripts/kernel-doc: simplify signature printing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Two small audit patches:
- Use the KMEM_CACHE() macro instead of kmem_cache_create()
The guidance appears to be to use the KMEM_CACHE() macro when
possible and there is no reason why we can't use the macro, so
let's use it.
- Remove an unnecessary assignment in audit_dupe_lsm_field()
A return value variable was assigned a value in its declaration,
but the declaration value is overwritten before the return value
variable is ever referenced; drop the assignment at declaration
time"
* tag 'audit-pr-20240312' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: use KMEM_CACHE() instead of kmem_cache_create()
audit: remove unnecessary assignment in audit_dupe_lsm_field()
|
|
Pull smack updates from Casey Schaufler:
- Improvements to the initialization of in-memory inodes
- A fix in ramfs to propery ensure the initialization of in-memory
inodes
- Removal of duplicated code in smack_cred_transfer()
* tag 'Smack-for-6.9' of https://github.com/cschaufler/smack-next:
Smack: use init_task_smack() in smack_cred_transfer()
ramfs: Initialize security of in-memory inodes
smack: Initialize the in-memory inode in smack_inode_init_security()
smack: Always determine inode labels in smack_inode_init_security()
smack: Handle SMACK64TRANSMUTE in smack_inode_setsecurity()
smack: Set SMACK64TRANSMUTE only for dirs in smack_inode_setxattr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"There are no core kernel changes here; it's entirely selftests and
samples:
- Improve reliability of selftests (Terry Tritton, Kees Cook)
- Fix strict-aliasing warning in samples (Arnd Bergmann)"
* tag 'seccomp-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
samples: user-trap: fix strict-aliasing warning
selftests/seccomp: Pin benchmark to single CPU
selftests/seccomp: user_notification_addfd check nextfd is available
selftests/seccomp: Change the syscall used in KILL_THREAD test
selftests/seccomp: Handle EINVAL on unshare(CLONE_NEWPID)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Drop needless error path code in remove_arg_zero() (Li kunyu, Kees
Cook)
- binfmt_elf_efpic: Don't use missing interpreter's properties (Max
Filippov)
- Use /bin/bash for execveat selftests
* tag 'execve-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
exec: Simplify remove_arg_zero() error path
selftests/exec: Perform script checks with /bin/bash
exec: Delete unnecessary statements in remove_arg_zero()
fs: binfmt_elf_efpic: don't use missing interpreter's properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
- Make PSTORE_RAM available by default on arm64 (Nícolas F R A Prado)
- Allow for dynamic initialization in modular build (Guilherme G
Piccoli)
- Add missing allocation failure check (Kunwu Chan)
- Avoid duplicate memory zeroing (Christophe JAILLET)
- Avoid potential double-free during pstorefs umount
* tag 'pstore-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/zone: Don't clear memory twice
pstore/zone: Add a null pointer check to the psz_kmsg_read
efi: pstore: Allow dynamic initialization based on module parameter
arm64: defconfig: Enable PSTORE_RAM
pstore/ram: Register to module device table
pstore: inode: Only d_invalidate() is needed
|
|
Pull nfsd updates from Chuck Lever:
"The bulk of the patches for this release are optimizations, code
clean-ups, and minor bug fixes.
One new feature to mention is that NFSD administrators now have the
ability to revoke NFSv4 open and lock state. NFSD's NFSv3 support has
had this capability for some time.
As always I am grateful to NFSD contributors, reviewers, and testers"
* tag 'nfsd-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (75 commits)
NFSD: Clean up nfsd4_encode_replay()
NFSD: send OP_CB_RECALL_ANY to clients when number of delegations reaches its limit
NFSD: Document nfsd_setattr() fill-attributes behavior
nfsd: Fix NFSv3 atomicity bugs in nfsd_setattr()
nfsd: Fix a regression in nfsd_setattr()
NFSD: OP_CB_RECALL_ANY should recall both read and write delegations
NFSD: handle GETATTR conflict with write delegation
NFSD: add support for CB_GETATTR callback
NFSD: Document the phases of CREATE_SESSION
NFSD: Fix the NFSv4.1 CREATE_SESSION operation
nfsd: clean up comments over nfs4_client definition
svcrdma: Add Write chunk WRs to the RPC's Send WR chain
svcrdma: Post WRs for Write chunks in svc_rdma_sendto()
svcrdma: Post the Reply chunk and Send WR together
svcrdma: Move write_info for Reply chunks into struct svc_rdma_send_ctxt
svcrdma: Post Send WR chain
svcrdma: Fix retry loop in svc_rdma_send()
svcrdma: Prevent a UAF in svc_rdma_send()
svcrdma: Fix SQ wake-ups
svcrdma: Increase the per-transport rw_ctx count
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, we introduce compressed inode support over fscache
since a lot of native EROFS images are explicitly compressed so that
EROFS over fscache can be more widely used even without Dragonfly
Nydus [1].
Apart from that, there are some folio conversions for compressed
inodes available as well as a lockdep false positive fix.
Summary:
- Some folio conversions for compressed inodes;
- Add compressed inode support over fscache;
- Fix lockdep false positives of erofs_pseudo_mnt"
Link: https://nydus.dev [1]
* tag 'erofs-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: support compressed inodes over fscache
erofs: make iov_iter describe target buffers over fscache
erofs: fix lockdep false positives on initializing erofs_pseudo_mnt
erofs: refine managed cache operations to folios
erofs: convert z_erofs_submissionqueue_endio() to folios
erofs: convert z_erofs_fill_bio_vec() to folios
erofs: get rid of `justfound` debugging tag
erofs: convert z_erofs_do_read_page() to folios
erofs: convert z_erofs_onlinepage_.* to folios
|
|
Pull fsverity update from Eric Biggers:
"Slightly improve data verification performance by eliminating an
unnecessary lock"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: remove hash page spin lock
|
|
Pull fscrypt updates from Eric Biggers:
"Fix flakiness in a test by releasing the quota synchronously when a
key is removed, and other minor cleanups"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: shrink the size of struct fscrypt_inode_info slightly
fscrypt: write CBC-CTS instead of CTS-CBC
fscrypt: clear keyring before calling key_put()
fscrypt: explicitly require that inode->i_blkbits be set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull affs update from David Sterba:
"One change to AFFS that removes use of SLAB_MEM_SPREAD, which is going
to be removed from MM code"
* tag 'affs-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
affs: remove SLAB_MEM_SPREAD flag usage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Mostly stabilization, refactoring and cleanup changes. There rest are
minor performance optimizations due to caching or lock contention
reduction and a few notable fixes.
Performance improvements:
- minor speedup in logging when repeatedly allocated structure is
preallocated only once, improves latency and decreases lock
contention
- minor throughput increase (+6%), reduced lock contention after
clearing delayed allocation bits, applies to several common
workload types
- skip full quota rescan if a new relation is added in the same
transaction
Fixes:
- zstd fix for inline compressed file in subpage mode, updated
version from the 6.8 time
- proper qgroup inheritance ioctl parameter validation
- more fiemap followup fixes after reduced locking done in 6.8:
- fix race when detecting delalloc ranges
Core changes:
- more debugging code:
- added assertions for a very rare crash in raid56 calculation
- tree-checker dumps page state to give more insights into
possible reference counting issues
- add checksum calculation offloading sysfs knob, for now enabled
under DEBUG only to determine a good heuristic for deciding the
offload or synchronous, depends on various factors (block group
profile, device speed) and is not as clear as initially thought
(checksum type)
- error handling improvements, added assertions
- more page to folio conversion (defrag, truncate), cached size and
shift
- preparation for more fine grained locking of sectors in subpage
mode
- cleanups and refactoring:
- include cleanups, forward declarations
- pointer-to-structure helpers
- redundant argument removals
- removed unused code
- slab cache updates, last use of SLAB_MEM_SPREAD removed"
* tag 'for-6.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (114 commits)
btrfs: reuse cloned extent buffer during fiemap to avoid re-allocations
btrfs: fix race when detecting delalloc ranges during fiemap
btrfs: fix off-by-one chunk length calculation at contains_pending_extent()
btrfs: qgroup: allow quick inherit if snapshot is created and added to the same parent
btrfs: qgroup: validate btrfs_qgroup_inherit parameter
btrfs: include device major and minor numbers in the device scan notice
btrfs: mark btrfs_put_caching_control() static
btrfs: remove SLAB_MEM_SPREAD flag use
btrfs: qgroup: always free reserved space for extent records
btrfs: tree-checker: dump the page status if hit something wrong
btrfs: compression: remove dead comments in btrfs_compress_heuristic()
btrfs: subpage: make writer lock utilize bitmap
btrfs: subpage: make reader lock utilize bitmap
btrfs: unexport btrfs_subpage_start_writer() and btrfs_subpage_end_and_test_writer()
btrfs: pass a valid extent map cache pointer to __get_extent_map()
btrfs: merge btrfs_del_delalloc_inode() helpers
btrfs: pass btrfs_device to btrfs_scratch_superblocks()
btrfs: handle transaction commit errors in flush_reservations()
btrfs: use KMEM_CACHE() to create btrfs_free_space cache
btrfs: use KMEM_CACHE() to create delayed ref caches
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs update from Damien Le Moal:
- A single change for this cycle to convert zonefs to use the new
mount API
* tag 'zonefs-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: convert zonefs to use the new mount api
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Just two small updates this time:
- A series I did to unify the definition of PAGE_SIZE through
Kconfig, intended to help with a vdso rework that needs the
constant but cannot include the normal kernel headers when building
the compat VDSO on arm64 and potentially others
- a patch from Yan Zhao to remove the pfn_to_virt() definitions from
a couple of architectures after finding they were both incorrect
and entirely unused"
* tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: define CONFIG_PAGE_SIZE_*KB on all architectures
arch: simplify architecture specific page size configuration
arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions
mm: Remove broken pfn_to_virt() on arch csky/hexagon/openrisc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"This has the usual updates to enable platform specific driver modules
as new hardware gets supported, as well as an update to the
virt.config fragment so we disable all newly added platforms again"
* tag 'soc-defconfig-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: defconfig: Enable support for cbmem entries in the coreboot table
ARM: defconfig: enable STMicroelectronics accelerometer and gyro for Exynos
arm64: defconfig: drop ext2 filesystem and redundant ext3
arm64: defconfig: Enable Rockchip HDMI/eDP Combo PHY
arm64: defconfig: Enable Wave5 Video Encoder/Decoder
arm64: config: disable new platforms in virt.config
arm64: defconfig: Enable QCOM PBS
arm64: deconfig: enable Goodix Berlin SPI touchscreen driver as module
arm64: defconfig: Enable X1E80100 multimedia clock controllers configs
arm64: defconfig: Enable GCC and interconnect for QDU1000/QRU1000
arm64: defconfig: enable i.MX8MP ldb bridge
arm64: defconfig: enable the vf610 gpio driver
ARM: imx_v6_v7_defconfig: enable the vf610 gpio driver
ARM: multi_v7_defconfig: Add more TI Keystone support
arm64: defconfig: enable WCD939x USBSS driver as module
arm64: defconfig: enable audio drivers for SM8650 QRD board
arm64: defconfig: Enable Qualcomm interconnect providers
ARM: multi_v7_defconfig: Enable BACKLIGHT_CLASS_DEVICE
arm64: defconfig: Enable i.MX8QXP device drivers
ARM: multi_v7_defconfig: Add more TI Keystone support
...
|
|
Pull ARM SoC code updates from Arnd Bergmann:
"These are mostly minor updates, including a number of kerneldoc fixes
from Randy Dunlap across multiple platforms. OMAP gets a few bugfixes,
and the MAINTAINERS file gets updated for AMD Zynq and NXP S32G"
* tag 'soc-arm-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
ARM: s32c: update MAINTAINERS entry
ARM: AM33xx: PRM: Implement REBOOT_COLD
ARM: AM33xx: PRM: Remove redundand defines
ARM: omap1: remove duplicated 'select ARCH_OMAP'
ARM: s3c64xx: make bus_type const
ARM: imx: Remove usage of the deprecated ida_simple_xx() API
ARM: OMAP2+: fix kernel-doc warnings
ARM: OMAP2+: fix kernel-doc warnings
ARM: OMAP2+: fix a kernel-doc warning
ARM: OMAP2+: PRM: fix kernel-doc warnings
ARM: OMAP2+: prm44xx: fix a kernel-doc warning
ARM: OMAP2+: pmic-cpcap: fix kernel-doc warnings
ARM: OMAP2+: hwmod: fix kernel-doc warnings
ARM: OMAP2+: hwmod: remove misuse of kernel-doc
ARM: OMAP2+: CMINST: use matching function name in kernel-doc
ARM: OMAP2+: cm33xx: use matching function name in kernel-doc
ARM: OMAP2+: clock: fix a function name in kernel-doc
ARM: OMAP2+: clockdomain: fix kernel-doc warnings
ARM: OMAP2+: am33xx-restart: fix function name in kernel-doc
soc: xilinx: update maintainer of event manager driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code
- Feature updates for Tegra and Qualcomm platforms for added hardware
support
- A number of platforms get soc_device additions for identifying
newly added chips from Renesas, Qualcomm, Mediatek and Google
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems"
* tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
tee: make tee_bus_type const
soc: qcom: aoss: add missing kerneldoc for qmp members
soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
soc: qcom: spm: fix building with CONFIG_REGULATOR=n
bus: ti-sysc: constify the struct device_type usage
memory: stm32-fmc2-ebi: keep power domain on
memory: stm32-fmc2-ebi: add MP25 RIF support
memory: stm32-fmc2-ebi: add MP25 support
memory: stm32-fmc2-ebi: check regmap_read return value
dt-bindings: memory-controller: st,stm32: add MP25 support
dt-bindings: bus: imx-weim: convert to YAML
watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
MAINTAINERS: Update SCMI entry with HWMON driver
MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
memory: tegra: Fix indentation
memory: tegra: Add BPMP and ICC info for DLA clients
memory: tegra: Correct DLA client names
dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
firmware: arm_scmi: Update the supported clock protocol version
...
|
|
Pull SoC device tree updates from Arnd Bergmann:
"There is very little going on with new SoC support this time, all the
new chips are variations of others that we already support, and they
are all based on ARMv8 cores:
- Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
networking SoCs designed to be used in wireless routers, similar to
the already supported MT7986A (Filogic 830).
- NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
These are used in many embedded and industrial applications.
- Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are
automotive SoCs.
- TI J722S is another automotive variant of its K3 family, related to
the AM62 series.
There are a total of 7 new arm32 machines and 45 arm64 ones, including
- Two Android phones based on the old Tegra30 chip
- Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a
SoM development board
- A set-top box using Amlogic Meson G12A S905X2
- Eight embedded board using NXP i.MX6/8/9
- Three machines using Mediatek network router chips
- Ten Chromebooks, all based on Mediatek MT8186
- One development board based on Mediatek MT8395 (Genio 1200)
- Seven tablets and phones based on Qualcomm SoCs, most of them from
Samsung.
- A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)
- Three variants of the "White Hawk" board for Renesas automotive
SoCs
- Ten Rockchips RK35xx based machines, including NAS, Tablet, Game
console and industrial form factors.
- Three evaluation boards for TI K3 based SoCs
The other changes are mainly the usual feature additions for existing
hardware, cleanups, and dtc compile time fixes. One notable change is
the inclusion of PowerVR SGX GPU nodes on TI SoCs"
* tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits)
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
arm64: dts: qcom: sm8650: Fix SPMI channels size
arm64: dts: qcom: sm8550: Fix SPMI channels size
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
dtc: Enable dtc interrupt_provider check
arm64: dts: st: add video encoder support to stm32mp255
arm64: dts: st: add video decoder support to stm32mp255
ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
ARM: dts: stm32: enable CRC on stm32mp135f-dk
ARM: dts: stm32: add CRC on stm32mp131
ARM: dts: add stm32f769-disco-mb1166-reva09
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add DSI support on stm32f769
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Make the Zorro bus type constant
- defconfig updates
* tag 'm68k-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v6.8-rc1
zorro: Make zorro_bus_type const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Various virtual vs physical address usage fixes
- Fix error handling in Processor Activity Instrumentation device
driver, and export number of counters with a sysfs file
- Allow for multiple events when Processor Activity Instrumentation
counters are monitored in system wide sampling
- Change multiplier and shift values of the Time-of-Day clock source to
improve steering precision
- Remove a couple of unneeded GFP_DMA flags from allocations
- Disable mmap alignment if randomize_va_space is also disabled, to
avoid a too small heap
- Various changes to allow s390 to be compiled with LLVM=1, since
ld.lld and llvm-objcopy will have proper s390 support witch clang 19
- Add __uninitialized macro to Compiler Attributes. This is helpful
with s390's FPU code where some users have up to 520 byte stack
frames. Clearing such stack frames (if INIT_STACK_ALL_PATTERN or
INIT_STACK_ALL_ZERO is enabled) before they are used contradicts the
intention (performance improvement) of such code sections.
- Convert switch_to() to an out-of-line function, and use the generic
switch_to header file
- Replace the usage of s390's debug feature with pr_debug() calls
within the zcrypt device driver
- Improve hotplug support of the Adjunct Processor device driver
- Improve retry handling in the zcrypt device driver
- Various changes to the in-kernel FPU code:
- Make in-kernel FPU sections preemptible
- Convert various larger inline assemblies and assembler files to
C, mainly by using singe instruction inline assemblies. This
increases readability, but also allows makes it easier to add
proper instrumentation hooks
- Cleanup of the header files
- Provide fast variants of csum_partial() and
csum_partial_copy_nocheck() based on vector instructions
- Introduce and use a lock to synchronize accesses to zpci device data
structures to avoid inconsistent states caused by concurrent accesses
- Compile the kernel without -fPIE. This addresses the following
problems if the kernel is compiled with -fPIE:
- It uses dynamic symbols (.dynsym), for which the linker refuses
to allow more than 64k sections. This can break features which
use '-ffunction-sections' and '-fdata-sections', including
kpatch-build and function granular KASLR
- It unnecessarily uses GOT relocations, adding an extra layer of
indirection for many memory accesses
- Fix shared_cpu_list for CPU private L2 caches, which incorrectly were
reported as globally shared
* tag 's390-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (117 commits)
s390/tools: handle rela R_390_GOTPCDBL/R_390_GOTOFF64
s390/cache: prevent rebuild of shared_cpu_list
s390/crypto: remove retry loop with sleep from PAES pkey invocation
s390/pkey: improve pkey retry behavior
s390/zcrypt: improve zcrypt retry behavior
s390/zcrypt: introduce retries on in-kernel send CPRB functions
s390/ap: introduce mutex to lock the AP bus scan
s390/ap: rework ap_scan_bus() to return true on config change
s390/ap: clarify AP scan bus related functions and variables
s390/ap: rearm APQNs bindings complete completion
s390/configs: increase number of LOCKDEP_BITS
s390/vfio-ap: handle hardware checkstop state on queue reset operation
s390/pai: change sampling event assignment for PMU device driver
s390/boot: fix minor comment style damages
s390/boot: do not check for zero-termination relocation entry
s390/boot: make type of __vmlinux_relocs_64_start|end consistent
s390/boot: sanitize kaslr_adjust_relocs() function prototype
s390/boot: simplify GOT handling
s390: vmlinux.lds.S: fix .got.plt assertion
s390/boot: workaround current 'llvm-objdump -t -j ...' behavior
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Continuing work by Ard Biesheuvel to improve the x86 early startup
code, with the long-term goal to make it position independent:
- Get rid of early accesses to global objects, either by moving
them to the stack, deferring the access until later, or dropping
the globals entirely
- Move all code that runs early via the 1:1 mapping into
.head.text, and move code that does not out of it, so that build
time checks can be added later to ensure that no inadvertent
absolute references were emitted into code that does not
tolerate them
- Remove fixup_pointer() and occurrences of __pa_symbol(), which
rely on the compiler emitting absolute references, which is not
guaranteed
- Improve the early console code
- Add early console message about ignored NMIs, so that users are at
least warned about their existence - even if we cannot do anything
about them
- Improve the kexec code's kernel load address handling
- Enable more X86S (simplified x86) bits
- Simplify early boot GDT handling
- Micro-optimize the boot code a bit
- Misc cleanups
* tag 'x86-boot-2024-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/sev: Move early startup code into .head.text section
x86/sme: Move early SME kernel encryption handling into .head.text
x86/boot: Move mem_encrypt= parsing to the decompressor
efi/libstub: Add generic support for parsing mem_encrypt=
x86/startup_64: Simplify virtual switch on primary boot
x86/startup_64: Simplify calculation of initial page table address
x86/startup_64: Defer assignment of 5-level paging global variables
x86/startup_64: Simplify CR4 handling in startup code
x86/boot: Use 32-bit XOR to clear registers
efi/x86: Set the PE/COFF header's NX compat flag unconditionally
x86/boot/64: Load the final kernel GDT during early boot directly, remove startup_gdt[]
x86/boot/64: Use RIP_REL_REF() to access early_top_pgt[]
x86/boot/64: Use RIP_REL_REF() to access early page tables
x86/boot/64: Use RIP_REL_REF() to access '__supported_pte_mask'
x86/boot/64: Use RIP_REL_REF() to access early_dynamic_pgts[]
x86/boot/64: Use RIP_REL_REF() to assign 'phys_base'
x86/boot/64: Simplify global variable accesses in GDT/IDT programming
x86/trampoline: Bypass compat mode in trampoline_start64() if not needed
kexec: Allocate kernel above bzImage's pref_address
x86/boot: Add a message about ignored early NMIs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC fixup from Dave Hansen:
"Revert VERW fixed addressing patch.
The reverted commit is not x86/apic material and was cruft left over
from a merge.
I believe the sequence of events went something like this:
- The commit in question was added to x86/urgent
- x86/urgent was merged into x86/apic to resolve a conflict
- The commit was zapped from x86/urgent, but *not* from x86/apic
- x86/apic got pullled (yesterday)
I think we need to be a bit more vigilant when zapping things to make
sure none of the other branches are depending on the zapped material"
* tag 'x86-apic-2024-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "x86/bugs: Use fixed addressing for VERW operand"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RFDS mitigation from Dave Hansen:
"RFDS is a CPU vulnerability that may allow a malicious userspace to
infer stale register values from kernel space. Kernel registers can
have all kinds of secrets in them so the mitigation is basically to
wait until the kernel is about to return to userspace and has user
values in the registers. At that point there is little chance of
kernel secrets ending up in the registers and the microarchitectural
state can be cleared.
This leverages some recent robustness fixes for the existing MDS
vulnerability. Both MDS and RFDS use the VERW instruction for
mitigation"
* tag 'rfds-for-linus-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM/x86: Export RFDS_NO and RFDS_CLEAR to guests
x86/rfds: Mitigate Register File Data Sampling (RFDS)
Documentation/hw-vuln: Add documentation for RFDS
x86/mmio: Disable KVM mitigation when X86_FEATURE_CLEAR_CPU_BUF is set
|
|
This was reverts commit 8009479ee919b9a91674f48050ccbff64eafedaa.
It was originally in x86/urgent, but was deemed wrong so got zapped.
But in the meantime, x86/urgent had been merged into x86/apic to
resolve a conflict. I didn't notice the merge so didn't zap it
from x86/apic and it managed to make it up with the x86/apic
material.
The reverted commit is known to cause some KASAN problems.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
|
|
There's a new conflict with Linus's upstream tree, because
in the following merge conflict resolution in <asm/coco.h>:
38b334fc767e Merge tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Linus has resolved the conflicting placement of 'cc_mask' better
than the original commit:
1c811d403afd x86/sev: Fix position dependent variable references in startup code
... which was also done by an internal merge resolution:
2e5fc4786b7a Merge branch 'x86/sev' into x86/boot, to resolve conflicts and to pick up dependent tree
But Linus is right in 38b334fc767e, the 'cc_mask' declaration is sufficient
within the #ifdef CONFIG_ARCH_HAS_CC_PLATFORM block.
So instead of forcing Linus to do the same resolution again, merge in Linus's
tree and follow his conflict resolution.
Conflicts:
arch/x86/include/asm/coco.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Merge in late fixes to prepare for the 6.9 net-next PR.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ido Schimmel says:
====================
nexthop: Fix two nexthop group statistics issues
Fix two issues that were introduced as part of the recent nexthop group
statistics submission. See the commit messages for more details.
====================
Link: https://lore.kernel.org/r/20240311162307.545385-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Locally generated packets can increment the new nexthop statistics from
process context, resulting in the following splat [1] due to preemption
being enabled. Fix by using get_cpu_ptr() / put_cpu_ptr() which will
which take care of disabling / enabling preemption.
BUG: using smp_processor_id() in preemptible [00000000] code: ping/949
caller is nexthop_select_path+0xcf8/0x1e30
CPU: 12 PID: 949 Comm: ping Not tainted 6.8.0-rc7-custom-gcb450f605fae #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xbd/0xe0
check_preemption_disabled+0xce/0xe0
nexthop_select_path+0xcf8/0x1e30
fib_select_multipath+0x865/0x18b0
fib_select_path+0x311/0x1160
ip_route_output_key_hash_rcu+0xe54/0x2720
ip_route_output_key_hash+0x193/0x380
ip_route_output_flow+0x25/0x130
raw_sendmsg+0xbab/0x34a0
inet_sendmsg+0xa2/0xe0
__sys_sendto+0x2ad/0x430
__x64_sys_sendto+0xe5/0x1c0
do_syscall_64+0xc5/0x1d0
entry_SYSCALL_64_after_hwframe+0x63/0x6b
[...]
Fixes: f4676ea74b85 ("net: nexthop: Add nexthop group entry stats")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240311162307.545385-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Passing a maximum attribute type to nlmsg_parse() that is larger than
the size of the passed policy will result in an out-of-bounds access [1]
when the attribute type is used as an index into the policy array.
Fix by setting the maximum attribute type according to the policy size,
as is already done for RTM_NEWNEXTHOP messages. Add a test case that
triggers the bug.
No regressions in fib nexthops tests:
# ./fib_nexthops.sh
[...]
Tests passed: 236
Tests failed: 0
[1]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x1e53/0x2940
Read of size 1 at addr ffffffff99ab4d20 by task ip/610
CPU: 3 PID: 610 Comm: ip Not tainted 6.8.0-rc7-custom-gd435d6e3e161 #9
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x8f/0xe0
print_report+0xcf/0x670
kasan_report+0xd8/0x110
__nla_validate_parse+0x1e53/0x2940
__nla_parse+0x40/0x50
rtm_del_nexthop+0x1bd/0x400
rtnetlink_rcv_msg+0x3cc/0xf20
netlink_rcv_skb+0x170/0x440
netlink_unicast+0x540/0x820
netlink_sendmsg+0x8d3/0xdb0
____sys_sendmsg+0x31f/0xa60
___sys_sendmsg+0x13a/0x1e0
__sys_sendmsg+0x11c/0x1f0
do_syscall_64+0xc5/0x1d0
entry_SYSCALL_64_after_hwframe+0x63/0x6b
[...]
The buggy address belongs to the variable:
rtm_nh_policy_del+0x20/0x40
Fixes: 2118f9390d83 ("net: nexthop: Adjust netlink policy parsing for a new attribute")
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/netdev/CANn89i+UNcG0PJMW5X7gOMunF38ryMh=L1aeZUKH3kL4UdUqag@mail.gmail.com/
Reported-by: syzbot+65bb09a7208ce3d4a633@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/00000000000088981b06133bc07b@google.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240311162307.545385-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The attribute is parsed in __nh_valid_dump_req() which is called by the
dump handlers of RTM_GETNEXTHOP and RTM_GETNEXTHOPBUCKET although it is
only used by the former and rejected by the policy of the latter.
Move the parsing to nh_valid_dump_req() which is only called by the dump
handler of RTM_GETNEXTHOP.
This is a preparation for a subsequent patch.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240311162307.545385-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The attribute is parsed into 'op_flags' in nh_valid_get_del_req() which
is called from the handlers of three message types: RTM_DELNEXTHOP,
RTM_GETNEXTHOPBUCKET and RTM_GETNEXTHOP. The attribute is only used by
the latter and rejected by the policies of the other two.
Pass 'op_flags' as NULL from the handlers of the other two and only
parse the attribute when the argument is not NULL.
This is a preparation for a subsequent patch.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240311162307.545385-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 tdx update from Dave Hansen:
- Fix sparse warning from TDX use of movdir64b()
* tag 'x86_tdx_for_6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove the __iomem annotation of movdir64b()'s dst argument
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen:
- Add a warning when memory encryption conversions fail. These
operations require VMM cooperation, even in CoCo environments where
the VMM is untrusted. While it's _possible_ that memory pressure
could trigger the new warning, the odds are that a guest would only
see this from an attacking VMM.
- Simplify page fault code by re-enabling interrupts unconditionally
- Avoid truncation issues when pfns are passed in to pfn_to_kaddr()
with small (<64-bit) types.
* tag 'x86_mm_for_6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/cpa: Warn for set_memory_XXcrypted() VMM fails
x86/mm: Get rid of conditional IF flag handling in page fault path
x86/mm: Ensure input to pfn_to_kaddr() is treated as a 64-bit type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
- The biggest change is the rework of the percpu code, to support the
'Named Address Spaces' GCC feature, by Uros Bizjak:
- This allows C code to access GS and FS segment relative memory
via variables declared with such attributes, which allows the
compiler to better optimize those accesses than the previous
inline assembly code.
- The series also includes a number of micro-optimizations for
various percpu access methods, plus a number of cleanups of %gs
accesses in assembly code.
- These changes have been exposed to linux-next testing for the
last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally working handling
of FPU switching - which also generates better code
- Propagate more RIP-relative addressing in assembly code, to generate
slightly better code
- Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
make it easier for distros to follow & maintain these options
- Rework the x86 idle code to cure RCU violations and to clean up the
logic
- Clean up the vDSO Makefile logic
- Misc cleanups and fixes
* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/idle: Select idle routine only once
x86/idle: Let prefer_mwait_c1_over_halt() return bool
x86/idle: Cleanup idle_setup()
x86/idle: Clean up idle selection
x86/idle: Sanitize X86_BUG_AMD_E400 handling
sched/idle: Conditionally handle tick broadcast in default_idle_call()
x86: Increase brk randomness entropy for 64-bit systems
x86/vdso: Move vDSO to mmap region
x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
x86/retpoline: Ensure default return thunk isn't used at runtime
x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
x86/vdso: Use $(addprefix ) instead of $(foreach )
x86/vdso: Simplify obj-y addition
x86/vdso: Consolidate targets and clean-files
x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO
x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY
x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY
x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups, including a large series from Thomas Gleixner to cure
sparse warnings"
* tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Drop unused declaration of proc_nmi_enabled()
x86/callthunks: Use EXPORT_PER_CPU_SYMBOL_GPL() for per CPU variables
x86/cpu: Provide a declaration for itlb_multihit_kvm_mitigation
x86/cpu: Use EXPORT_PER_CPU_SYMBOL_GPL() for x86_spec_ctrl_current
x86/uaccess: Add missing __force to casts in __access_ok() and valid_user_address()
x86/percpu: Cure per CPU madness on UP
smp: Consolidate smp_prepare_boot_cpu()
x86/msr: Add missing __percpu annotations
x86/msr: Prepare for including <linux/percpu.h> into <asm/msr.h>
perf/x86/amd/uncore: Fix __percpu annotation
x86/nmi: Remove an unnecessary IS_ENABLED(CONFIG_SMP)
x86/apm_32: Remove dead function apm_get_battery_status()
x86/insn-eval: Fix function param name in get_eff_addr_sib()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Ingo Molnar:
- Reduce <asm/bootparam.h> dependencies
- Simplify <asm/efi.h>
- Unify *_setup_data definitions into <asm/setup_data.h>
- Reduce the size of <asm/bootparam.h>
* tag 'x86-build-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Do not include <asm/bootparam.h> in several files
x86/efi: Implement arch_ima_efi_boot_mode() in source file
x86/setup: Move internal setup_data structures into setup_data.h
x86/setup: Move UAPI setup structures into setup_data.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
"Two changes to simplify the x86 decoder logic a bit"
* tag 'x86-asm-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Directly assign x86_64 state in insn_init()
x86/insn: Remove superfluous checks from instruction decoding routines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Fix inconsistency in misfit task load-balancing
- Fix CPU isolation bugs in the task-wakeup logic
- Rework and unify the sched_use_asym_prio() and sched_asym_prefer()
logic
- Clean up and simplify ->avg_* accesses
- Misc cleanups and fixes
* tag 'sched-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/topology: Rename SD_SHARE_PKG_RESOURCES to SD_SHARE_LLC
sched/fair: Check the SD_ASYM_PACKING flag in sched_use_asym_prio()
sched/fair: Rework sched_use_asym_prio() and sched_asym_prefer()
sched/fair: Remove unused parameter from sched_asym()
sched/topology: Remove duplicate descriptions from TOPOLOGY_SD_FLAGS
sched/fair: Simplify the update_sd_pick_busiest() logic
sched/fair: Do strict inequality check for busiest misfit task group
sched/fair: Remove unnecessary goto in update_sd_lb_stats()
sched/fair: Take the scheduling domain into account in select_idle_core()
sched/fair: Take the scheduling domain into account in select_idle_smt()
sched/fair: Add READ_ONCE() and use existing helper function to access ->avg_irq
sched/fair: Use existing helper functions to access ->avg_rt and ->avg_dl
sched/core: Simplify code by removing duplicate #ifdefs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Micro-optimize local_xchg() and the rtmutex code on x86
- Fix percpu-rwsem contention tracepoints
- Simplify debugging Kconfig dependencies
- Update/clarify the documentation of atomic primitives
- Misc cleanups
* tag 'locking-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Use try_cmpxchg_relaxed() in mark_rt_mutex_waiters()
locking/x86: Implement local_xchg() using CMPXCHG without the LOCK prefix
locking/percpu-rwsem: Trigger contention tracepoints only if contended
locking/rwsem: Make DEBUG_RWSEMS and PREEMPT_RT mutually exclusive
locking/rwsem: Clarify that RWSEM_READER_OWNED is just a hint
locking/mutex: Simplify <linux/mutex.h>
locking/qspinlock: Fix 'wait_early' set but not used warning
locking/atomic: scripts: Clarify ordering of conditional atomics
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add a FRU (Field Replaceable Unit) memory poison manager which
collects and manages previously encountered hw errors in order to
save them to persistent storage across reboots. Previously recorded
errors are "replayed" upon reboot in order to poison memory which has
caused said errors in the past.
The main use case is stacked, on-chip memory which cannot simply be
replaced so poisoning faulty areas of it and thus making them
inaccessible is the only strategy to prolong its lifetime.
- Add an AMD address translation library glue which converts the
reported addresses of hw errors into system physical addresses in
order to be used by other subsystems like memory failure, for
example. Add support for MI300 accelerators to that library.
- igen6: Add support for Alder Lake-N SoC
- i10nm: Add Grand Ridge support
- The usual fixlets and cleanups
* tag 'edac_updates_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versal: Convert to platform remove callback returning void
RAS/AMD/FMPM: Fix off by one when unwinding on error
RAS/AMD/FMPM: Add debugfs interface to print record entries
RAS/AMD/FMPM: Save SPA values
RAS: Export helper to get ras_debugfs_dir
RAS/AMD/ATL: Fix bit overflow in denorm_addr_df4_np2()
RAS: Introduce a FRU memory poison manager
RAS/AMD/ATL: Add MI300 row retirement support
Documentation: Move RAS section to admin-guide
EDAC/versal: Make the bit position of injected errors configurable
EDAC/i10nm: Add Intel Grand Ridge micro-server support
EDAC/igen6: Add one more Intel Alder Lake-N SoC support
RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support
RAS/AMD/ATL: Fix array overflow in get_logical_coh_st_fabric_id_mi300()
RAS/AMD/ATL: Add MI300 support
Documentation: RAS: Add index and address translation section
EDAC/amd64: Use new AMD Address Translation Library
RAS: Introduce AMD Address Translation Library
EDAC/synopsys: Convert to devm_platform_ioremap_resource()
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2024-03-11
We've added 59 non-merge commits during the last 9 day(s) which contain
a total of 88 files changed, 4181 insertions(+), 590 deletions(-).
The main changes are:
1) Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages to be used in bpf_arena,
from Alexei.
2) Introduce bpf_arena which is sparse shared memory region between bpf
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly for
both user-space programs and bpf programs, from Alexei and Andrii.
3) Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it, from Alexei.
4) Use IETF format for field definitions in the BPF standard
document, from Dave.
5) Extend struct_ops libbpf APIs to allow specify version suffixes for
stuct_ops map types, share the same BPF program between several map
definitions, and other improvements, from Eduard.
6) Enable struct_ops support for more than one page in trampolines,
from Kui-Feng.
7) Support kCFI + BPF on riscv64, from Puranjay.
8) Use bpf_prog_pack for arm64 bpf trampoline, from Puranjay.
9) Fix roundup_pow_of_two undefined behavior on 32-bit archs, from Toke.
====================
Link: https://lore.kernel.org/r/20240312003646.8692-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Borislav Petkov:
- Fix a wrong check in the function reporting whether a CPU executes
(or not) a NMI handler
- Ratelimit unknown NMIs messages in order to not potentially slow down
the machine
- Other fixlets
* tag 'x86_misc_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Fix the inverse "in NMI handler" check
Documentation/maintainer-tip: Add C++ tail comments exception
Documentation/maintainer-tip: Add Closes tag
x86/nmi: Rate limit unknown NMI messages
Documentation/kernel-parameters: Add spec_rstack_overflow to mitigations=off
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Add the x86 part of the SEV-SNP host support.
This will allow the kernel to be used as a KVM hypervisor capable of
running SNP (Secure Nested Paging) guests. Roughly speaking, SEV-SNP
is the ultimate goal of the AMD confidential computing side,
providing the most comprehensive confidential computing environment
up to date.
This is the x86 part and there is a KVM part which did not get ready
in time for the merge window so latter will be forthcoming in the
next cycle.
- Rework the early code's position-dependent SEV variable references in
order to allow building the kernel with clang and -fPIE/-fPIC and
-mcmodel=kernel
- The usual set of fixes, cleanups and improvements all over the place
* tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/sev: Disable KMSAN for memory encryption TUs
x86/sev: Dump SEV_STATUS
crypto: ccp - Have it depend on AMD_IOMMU
iommu/amd: Fix failure return from snp_lookup_rmpentry()
x86/sev: Fix position dependent variable references in startup code
crypto: ccp: Make snp_range_list static
x86/Kconfig: Remove CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT
Documentation: virt: Fix up pre-formatted text block for SEV ioctls
crypto: ccp: Add the SNP_SET_CONFIG command
crypto: ccp: Add the SNP_COMMIT command
crypto: ccp: Add the SNP_PLATFORM_STATUS command
x86/cpufeatures: Enable/unmask SEV-SNP CPU feature
KVM: SEV: Make AVIC backing, VMSA and VMCB memory allocation SNP safe
crypto: ccp: Add panic notifier for SEV/SNP firmware shutdown on kdump
iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown
crypto: ccp: Handle legacy SEV commands when SNP is enabled
crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled
crypto: ccp: Handle the legacy TMR allocation when SNP is enabled
x86/sev: Introduce an SNP leaked pages list
crypto: ccp: Provide an API to issue SEV and SNP commands
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull resource control updates from Borislav Petkov:
- Rework different aspects of the resctrl code like adding
arch-specific accessors and splitting the locking, in order to
accomodate ARM's MPAM implementation of hw resource control and be
able to use the same filesystem control interface like on x86. Work
by James Morse
- Improve the memory bandwidth throttling heuristic to handle workloads
with not too regular load levels which end up penalized unnecessarily
- Use CPUID to detect the memory bandwidth enforcement limit on AMD
- The usual set of fixes
* tag 'x86_cache_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
x86/resctrl: Remove lockdep annotation that triggers false positive
x86/resctrl: Separate arch and fs resctrl locks
x86/resctrl: Move domain helper migration into resctrl_offline_cpu()
x86/resctrl: Add CPU offline callback for resctrl work
x86/resctrl: Allow overflow/limbo handlers to be scheduled on any-but CPU
x86/resctrl: Add CPU online callback for resctrl work
x86/resctrl: Add helpers for system wide mon/alloc capable
x86/resctrl: Make rdt_enable_key the arch's decision to switch
x86/resctrl: Move alloc/mon static keys into helpers
x86/resctrl: Make resctrl_mounted checks explicit
x86/resctrl: Allow arch to allocate memory needed in resctrl_arch_rmid_read()
x86/resctrl: Allow resctrl_arch_rmid_read() to sleep
x86/resctrl: Queue mon_event_read() instead of sending an IPI
x86/resctrl: Add cpumask_any_housekeeping() for limbo/overflow
x86/resctrl: Move CLOSID/RMID matching and setting to use helpers
x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid
x86/resctrl: Use __set_bit()/__clear_bit() instead of open coding
x86/resctrl: Track the number of dirty RMID a CLOSID has
x86/resctrl: Allow RMID allocation to be scoped by CLOSID
x86/resctrl: Access per-rmid structures by index
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 MTRR update from Borislav Petkov:
- Relax the PAT MSR programming which was unnecessarily using the MTRR
programming protocol of disabling the cache around the changes. The
reason behind this is the current algorithm triggering a #VE
exception for TDX guests and unnecessarily complicating things
* tag 'x86_mtrr_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pat: Simplify the PAT programming protocol
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu update from Borislav Petkov:
- Have AMD Zen common init code run on all families from Zen1 onwards
in order to save some future enablement effort
* tag 'x86_cpu_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Do the common init on future Zens too
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fixlet from Borislav Petkov:
- Constify yet another static struct bus_type instance now that the
driver core can handle that
* tag 'ras_core_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make mce_subsys const
|
|
This reverts commit 8e0ef412869430d114158fc3b9b1fb111e247bd3.
It's broken, and causes the boot to fail on encrypted volumes.
Reported-and-bisected-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/all/20240311235023.GA1205@cmpxchg.org/
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
prog->aux->sleepable is checked very frequently as part of (some) BPF
program run hot paths. So this extra aux indirection seems wasteful and
on busy systems might cause unnecessary memory cache misses.
Let's move sleepable flag into prog itself to eliminate unnecessary
pointer dereference.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Message-ID: <20240309004739.2961431-1-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
On some architectures like ARM64, PMD_SIZE can be really large in some
configurations. Like with CONFIG_ARM64_64K_PAGES=y the PMD_SIZE is
512MB.
Use 2MB * num_possible_nodes() as the size for allocations done through
the prog pack allocator. On most architectures, PMD_SIZE will be equal
to 2MB in case of 4KB pages and will be greater than 2MB for bigger page
sizes.
Fixes: ea2babac63d4 ("bpf: Simplify bpf_prog_pack_[size|mask]")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Closes: https://lore.kernel.org/all/7e216c88-77ee-47b8-becc-a0f780868d3c@sirena.org.uk/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403092219.dhgcuz2G-lkp@intel.com/
Suggested-by: Song Liu <song@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Message-ID: <20240311122722.86232-1-puranjay12@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry update from Thomas Gleixner:
"A single update for the x86 entry code:
The current CR3 handling for kernel page table isolation in the
paranoid return paths which are relevant for #NMI, #MCE, #VC, #DB and
#DF is unconditionally writing CR3 with the value retrieved on
exception entry.
In the vast majority of cases when returning to the kernel this is a
pointless exercise because CR3 was not modified on exception entry.
The only situation where this is necessary is when the exception
interrupts a entry from user before switching to kernel CR3 or
interrupts an exit to user after switching back to user CR3.
As CR3 writes can be expensive on some systems this becomes measurable
overhead with high frequency #NMIs such as perf.
Avoid this overhead by checking the CR3 value, which was saved on
entry, and write it back to CR3 only when it is a user CR3"
* tag 'x86-entry-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Avoid redundant CR3 write on paranoid returns
|
|
Adding kprobe multi triggering benchmarks. It's useful now to bench
new fprobe implementation and might be useful later as well.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240311211023.590321-1-jolsa@kernel.org
|
|
Move from simple ida to xarray for storing and loading the ptp_clock
pointer. This prepares support for future hardware timestamp selection by
being able to link the ptp clock index to its pointer.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240311144730.1239594-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20240311112437.3813987-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the vxlan driver and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20240311112437.3813987-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FRED support from Thomas Gleixner:
"Support for x86 Fast Return and Event Delivery (FRED).
FRED is a replacement for IDT event delivery on x86 and addresses most
of the technical nightmares which IDT exposes:
1) Exception cause registers like CR2 need to be manually preserved
in nested exception scenarios.
2) Hardware interrupt stack switching is suboptimal for nested
exceptions as the interrupt stack mechanism rewinds the stack on
each entry which requires a massive effort in the low level entry
of #NMI code to handle this.
3) No hardware distinction between entry from kernel or from user
which makes establishing kernel context more complex than it needs
to be especially for unconditionally nestable exceptions like NMI.
4) NMI nesting caused by IRET unconditionally reenabling NMIs, which
is a problem when the perf NMI takes a fault when collecting a
stack trace.
5) Partial restore of ESP when returning to a 16-bit segment
6) Limitation of the vector space which can cause vector exhaustion
on large systems.
7) Inability to differentiate NMI sources
FRED addresses these shortcomings by:
1) An extended exception stack frame which the CPU uses to save
exception cause registers. This ensures that the meta information
for each exception is preserved on stack and avoids the extra
complexity of preserving it in software.
2) Hardware interrupt stack switching is non-rewinding if a nested
exception uses the currently interrupt stack.
3) The entry points for kernel and user context are separate and GS
BASE handling which is required to establish kernel context for
per CPU variable access is done in hardware.
4) NMIs are now nesting protected. They are only reenabled on the
return from NMI.
5) FRED guarantees full restore of ESP
6) FRED does not put a limitation on the vector space by design
because it uses a central entry points for kernel and user space
and the CPUstores the entry type (exception, trap, interrupt,
syscall) on the entry stack along with the vector number. The
entry code has to demultiplex this information, but this removes
the vector space restriction.
The first hardware implementations will still have the current
restricted vector space because lifting this limitation requires
further changes to the local APIC.
7) FRED stores the vector number and meta information on stack which
allows having more than one NMI vector in future hardware when the
required local APIC changes are in place.
The series implements the initial FRED support by:
- Reworking the existing entry and IDT handling infrastructure to
accomodate for the alternative entry mechanism.
- Expanding the stack frame to accomodate for the extra 16 bytes FRED
requires to store context and meta information
- Providing FRED specific C entry points for events which have
information pushed to the extended stack frame, e.g. #PF and #DB.
- Providing FRED specific C entry points for #NMI and #MCE
- Implementing the FRED specific ASM entry points and the C code to
demultiplex the events
- Providing detection and initialization mechanisms and the necessary
tweaks in context switching, GS BASE handling etc.
The FRED integration aims for maximum code reuse vs the existing IDT
implementation to the extent possible and the deviation in hot paths
like context switching are handled with alternatives to minimalize the
impact. The low level entry and exit paths are seperate due to the
extended stack frame and the hardware based GS BASE swichting and
therefore have no impact on IDT based systems.
It has been extensively tested on existing systems and on the FRED
simulation and as of now there are no outstanding problems"
* tag 'x86-fred-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
x86/fred: Fix init_task thread stack pointer initialization
MAINTAINERS: Add a maintainer entry for FRED
x86/fred: Fix a build warning with allmodconfig due to 'inline' failing to inline properly
x86/fred: Invoke FRED initialization code to enable FRED
x86/fred: Add FRED initialization functions
x86/syscall: Split IDT syscall setup code into idt_syscall_init()
KVM: VMX: Call fred_entry_from_kvm() for IRQ/NMI handling
x86/entry: Add fred_entry_from_kvm() for VMX to handle IRQ/NMI
x86/entry/calling: Allow PUSH_AND_CLEAR_REGS being used beyond actual entry code
x86/fred: Fixup fault on ERETU by jumping to fred_entrypoint_user
x86/fred: Let ret_from_fork_asm() jmp to asm_fred_exit_user when FRED is enabled
x86/traps: Add sysvec_install() to install a system interrupt handler
x86/fred: FRED entry/exit and dispatch code
x86/fred: Add a machine check entry stub for FRED
x86/fred: Add a NMI entry stub for FRED
x86/fred: Add a debug fault entry stub for FRED
x86/idtentry: Incorporate definitions/declarations of the FRED entries
x86/fred: Make exc_page_fault() work for FRED
x86/fred: Allow single-step trap and NMI when starting a new task
x86/fred: No ESPFIX needed when FRED is enabled
...
|
|
Add the comment to remind people not to manually modify
the net/devlink/netlink_gen.c, but to use tools/net/ynl/ynl-regen.sh
to generate it.
Signed-off-by: William Tu <witu@nvidia.com>
Suggested-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240310145503.32721-1-witu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kmalloc_array() in nfp_fl_lag_do_work() will return null, if
the physical memory has run out. As a result, if we dereference
the acti_netdevs, the null pointer dereference bugs will happen.
This patch adds a check to judge whether allocation failure occurs.
If it happens, the delayed work will be rescheduled and try again.
Fixes: bb9a8d031140 ("nfp: flower: monitor and offload LAG groups")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20240308142540.9674-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently getsockopt does not support PACKET_COPY_THRESH,
and we are unable to get the value of PACKET_COPY_THRESH
socket option through getsockopt.
This patch adds getsockopt support for PACKET_COPY_THRESH.
In addition, this patch converts access to copy_thresh to
READ_ONCE/WRITE_ONCE.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/AM6PR03MB58487A9704FD150CF76F542899272@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently getsockopt does not support NETLINK_LISTEN_ALL_NSID,
and we are unable to get the value of NETLINK_LISTEN_ALL_NSID
socket option through getsockopt.
This patch adds getsockopt support for NETLINK_LISTEN_ALL_NSID.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB58482322B7B335308DA56FE599272@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
"Rework of APIC enumeration and topology evaluation.
The current implementation has a couple of shortcomings:
- It fails to handle hybrid systems correctly.
- The APIC registration code which handles CPU number assignents is
in the middle of the APIC code and detached from the topology
evaluation.
- The various mechanisms which enumerate APICs, ACPI, MPPARSE and
guest specific ones, tweak global variables as they see fit or in
case of XENPV just hack around the generic mechanisms completely.
- The CPUID topology evaluation code is sprinkled all over the vendor
code and reevaluates global variables on every hotplug operation.
- There is no way to analyze topology on the boot CPU before bringing
up the APs. This causes problems for infrastructure like PERF which
needs to size certain aspects upfront or could be simplified if
that would be possible.
- The APIC admission and CPU number association logic is
incomprehensible and overly complex and needs to be kept around
after boot instead of completing this right after the APIC
enumeration.
This update addresses these shortcomings with the following changes:
- Rework the CPUID evaluation code so it is common for all vendors
and provides information about the APIC ID segments in a uniform
way independent of the number of segments (Thread, Core, Module,
..., Die, Package) so that this information can be computed instead
of rewriting global variables of dubious value over and over.
- A few cleanups and simplifcations of the APIC, IO/APIC and related
interfaces to prepare for the topology evaluation changes.
- Seperation of the parser stages so the early evaluation which tries
to find the APIC address can be seperately overridden from the late
evaluation which enumerates and registers the local APIC as further
preparation for sanitizing the topology evaluation.
- A new registration and admission logic which
- encapsulates the inner workings so that parsers and guest logic
cannot longer fiddle in it
- uses the APIC ID segments to build topology bitmaps at
registration time
- provides a sane admission logic
- allows to detect the crash kernel case, where CPU0 does not run
on the real BSP, automatically. This is required to prevent
sending INIT/SIPI sequences to the real BSP which would reset
the whole machine. This was so far handled by a tedious command
line parameter, which does not even work in nested crash
scenarios.
- Associates CPU number after the enumeration completed and
prevents the late registration of APICs, which was somehow
tolerated before.
- Converting all parsers and guest enumeration mechanisms over to the
new interfaces.
This allows to get rid of all global variable tweaking from the
parsers and enumeration mechanisms and sanitizes the XEN[PV]
handling so it can use CPUID evaluation for the first time.
- Mopping up existing sins by taking the information from the APIC ID
segment bitmaps.
This evaluates hybrid systems correctly on the boot CPU and allows
for cleanups and fixes in the related drivers, e.g. PERF.
The series has been extensively tested and the minimal late fallout
due to a broken ACPI/MADT table has been addressed by tightening the
admission logic further"
* tag 'x86-apic-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits)
x86/topology: Ignore non-present APIC IDs in a present package
x86/apic: Build the x86 topology enumeration functions on UP APIC builds too
smp: Provide 'setup_max_cpus' definition on UP too
smp: Avoid 'setup_max_cpus' namespace collision/shadowing
x86/bugs: Use fixed addressing for VERW operand
x86/cpu/topology: Get rid of cpuinfo::x86_max_cores
x86/cpu/topology: Provide __num_[cores|threads]_per_package
x86/cpu/topology: Rename topology_max_die_per_package()
x86/cpu/topology: Rename smp_num_siblings
x86/cpu/topology: Retrieve cores per package from topology bitmaps
x86/cpu/topology: Use topology logical mapping mechanism
x86/cpu/topology: Provide logical pkg/die mapping
x86/cpu/topology: Simplify cpu_mark_primary_thread()
x86/cpu/topology: Mop up primary thread mask handling
x86/cpu/topology: Use topology bitmaps for sizing
x86/cpu/topology: Let XEN/PV use topology from CPUID/MADT
x86/xen/smp_pv: Count number of vCPUs early
x86/cpu/topology: Assign hotpluggable CPUIDs during init
x86/cpu/topology: Reject unknown APIC IDs on ACPI hotplug
x86/topology: Add a mechanism to track topology via APIC IDs
...
|
|
Alexei Starovoitov says:
====================
bpf: Introduce BPF arena.
From: Alexei Starovoitov <ast@kernel.org>
v2->v3:
- contains bpf bits only, but cc-ing past audience for continuity
- since prerequisite patches landed, this series focus on the main
functionality of bpf_arena.
- adopted Andrii's approach to support arena in libbpf.
- simplified LLVM support. Instead of two instructions it's now only one.
- switched to cond_break (instead of open coded iters) in selftests
- implemented several follow-ups that will be sent after this set
. remember first IP and bpf insn that faulted in arena.
report to user space via bpftool
. copy paste and tweak glob_match() aka mini-regex as a selftests/bpf
- see patch 1 for detailed description of bpf_arena
v1->v2:
- Improved commit log with reasons for using vmap_pages_range() in arena.
Thanks to Johannes
- Added support for __arena global variables in bpf programs
- Fixed race conditions spotted by Barret
- Fixed wrap32 issue spotted by Barret
- Fixed bpf_map_mmap_sz() the way Andrii suggested
The work on bpf_arena was inspired by Barret's work:
https://github.com/google/ghost-userspace/blob/main/lib/queue.bpf.h
that implements queues, lists and AVL trees completely as bpf programs
using giant bpf array map and integer indices instead of pointers.
bpf_arena is a sparse array that allows to use normal C pointers to
build such data structures. Last few patches implement page_frag
allocator, link list and hash table as bpf programs.
v1:
bpf programs have multiple options to communicate with user space:
- Various ring buffers (perf, ftrace, bpf): The data is streamed
unidirectionally from bpf to user space.
- Hash map: The bpf program populates elements, and user space consumes
them via bpf syscall.
- mmap()-ed array map: Libbpf creates an array map that is directly
accessed by the bpf program and mmap-ed to user space. It's the fastest
way. Its disadvantage is that memory for the whole array is reserved at
the start.
====================
Link: https://lore.kernel.org/r/20240308010812.89848-1-alexei.starovoitov@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
bpf_arena_htab.h - hash table implemented as bpf program
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240308010812.89848-15-alexei.starovoitov@gmail.com
|
|
bpf_arena_alloc.h - implements page_frag allocator as a bpf program.
bpf_arena_list.h - doubly linked link list as a bpf program.
Compiled as a bpf program and as native C code.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240308010812.89848-14-alexei.starovoitov@gmail.com
|
|
Add unit tests for bpf_arena_alloc/free_pages() functionality
and bpf_arena_common.h with a set of common helpers and macros that
is used in this test and the following patches.
Also modify test_loader that didn't support running bpf_prog_type_syscall
programs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240308010812.89848-13-alexei.starovoitov@gmail.com
|
|
Introduce helper macro bpf_addr_space_cast() that emits:
rX = rX
instruction with off = BPF_ADDR_SPACE_CAST
and encodes dest and src address_space-s into imm32.
It's useful with older LLVM that doesn't emit this insn automatically.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-12-alexei.starovoitov@gmail.com
|
|
LLVM automatically places __arena variables into ".arena.1" ELF section.
In order to use such global variables bpf program must include definition
of arena map in ".maps" section, like:
struct {
__uint(type, BPF_MAP_TYPE_ARENA);
__uint(map_flags, BPF_F_MMAPABLE);
__uint(max_entries, 1000); /* number of pages */
__ulong(map_extra, 2ull << 44); /* start of mmap() region */
} arena SEC(".maps");
libbpf recognizes both uses of arena and creates single `struct bpf_map *`
instance in libbpf APIs.
".arena.1" ELF section data is used as initial data image, which is exposed
through skeleton and bpf_map__initial_value() to the user, if they need to tune
it before the load phase. During load phase, this initial image is copied over
into mmap()'ed region corresponding to arena, and discarded.
Few small checks here and there had to be added to make sure this
approach works with bpf_map__initial_value(), mostly due to hard-coded
assumption that map->mmaped is set up with mmap() syscall and should be
munmap()'ed. For arena, .arena.1 can be (much) smaller than maximum
arena size, so this smaller data size has to be tracked separately.
Given it is enforced that there is only one arena for entire bpf_object
instance, we just keep it in a separate field. This can be generalized
if necessary later.
All global variables from ".arena.1" section are accessible from user space
via skel->arena->name_of_var.
For bss/data/rodata the skeleton/libbpf perform the following sequence:
1. addr = mmap(MAP_ANONYMOUS)
2. user space optionally modifies global vars
3. map_fd = bpf_create_map()
4. bpf_update_map_elem(map_fd, addr) // to store values into the kernel
5. mmap(addr, MAP_FIXED, map_fd)
after step 5 user spaces see the values it wrote at step 2 at the same addresses
arena doesn't support update_map_elem. Hence skeleton/libbpf do:
1. addr = malloc(sizeof SEC ".arena.1")
2. user space optionally modifies global vars
3. map_fd = bpf_create_map(MAP_TYPE_ARENA)
4. real_addr = mmap(map->map_extra, MAP_SHARED | MAP_FIXED, map_fd)
5. memcpy(real_addr, addr) // this will fault-in and allocate pages
At the end look and feel of global data vs __arena global data is the same from
bpf prog pov.
Another complication is:
struct {
__uint(type, BPF_MAP_TYPE_ARENA);
} arena SEC(".maps");
int __arena foo;
int bar;
ptr1 = &foo; // relocation against ".arena.1" section
ptr2 = &arena; // relocation against ".maps" section
ptr3 = &bar; // relocation against ".bss" section
Fo the kernel ptr1 and ptr2 has point to the same arena's map_fd
while ptr3 points to a different global array's map_fd.
For the verifier:
ptr1->type == unknown_scalar
ptr2->type == const_ptr_to_map
ptr3->type == ptr_to_map_value
After verification, from JIT pov all 3 ptr-s are normal ld_imm64 insns.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-11-alexei.starovoitov@gmail.com
|
|
Teach bpftool to recognize arena map type.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-10-alexei.starovoitov@gmail.com
|
|
mmap() bpf_arena right after creation, since the kernel needs to
remember the address returned from mmap. This is user_vm_start.
LLVM will generate bpf_arena_cast_user() instructions where
necessary and JIT will add upper 32-bit of user_vm_start
to such pointers.
Fix up bpf_map_mmap_sz() to compute mmap size as
map->value_size * map->max_entries for arrays and
PAGE_SIZE * map->max_entries for arena.
Don't set BTF at arena creation time, since it doesn't support it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240308010812.89848-9-alexei.starovoitov@gmail.com
|
|
Add __arg_arena to bpf_helpers.h
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240308010812.89848-8-alexei.starovoitov@gmail.com
|
|
In global bpf functions recognize btf_decl_tag("arg:arena") as PTR_TO_ARENA.
Note, when the verifier sees:
__weak void foo(struct bar *p)
it recognizes 'p' as PTR_TO_MEM and 'struct bar' has to be a struct with scalars.
Hence the only way to use arena pointers in global functions is to tag them with "arg:arena".
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-7-alexei.starovoitov@gmail.com
|
|
rY = addr_space_cast(rX, 0, 1) tells the verifier that rY->type = PTR_TO_ARENA.
Any further operations on PTR_TO_ARENA register have to be in 32-bit domain.
The verifier will mark load/store through PTR_TO_ARENA with PROBE_MEM32.
JIT will generate them as kern_vm_start + 32bit_addr memory accesses.
rY = addr_space_cast(rX, 1, 0) tells the verifier that rY->type = unknown scalar.
If arena->map_flags has BPF_F_NO_USER_CONV set then convert cast_user to mov32 as well.
Otherwise JIT will convert it to:
rY = (u32)rX;
if (rY)
rY |= arena->user_vm_start & ~(u64)~0U;
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240308010812.89848-6-alexei.starovoitov@gmail.com
|
|
LLVM generates bpf_addr_space_cast instruction while translating
pointers between native (zero) address space and
__attribute__((address_space(N))).
The addr_space=1 is reserved as bpf_arena address space.
rY = addr_space_cast(rX, 0, 1) is processed by the verifier and
converted to normal 32-bit move: wX = wY
rY = addr_space_cast(rX, 1, 0) has to be converted by JIT:
aux_reg = upper_32_bits of arena->user_vm_start
aux_reg <<= 32
wX = wY // clear upper 32 bits of dst register
if (wX) // if not zero add upper bits of user_vm_start
wX |= aux_reg
JIT can do it more efficiently:
mov dst_reg32, src_reg32 // 32-bit move
shl dst_reg, 32
or dst_reg, user_vm_start
rol dst_reg, 32
xor r11, r11
test dst_reg32, dst_reg32 // check if lower 32-bit are zero
cmove r11, dst_reg // if so, set dst_reg to zero
// Intel swapped src/dst register encoding in CMOVcc
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-5-alexei.starovoitov@gmail.com
|
|
Add support for [LDX | STX | ST], PROBE_MEM32, [B | H | W | DW] instructions.
They are similar to PROBE_MEM instructions with the following differences:
- PROBE_MEM has to check that the address is in the kernel range with
src_reg + insn->off >= TASK_SIZE_MAX + PAGE_SIZE check
- PROBE_MEM doesn't support store
- PROBE_MEM32 relies on the verifier to clear upper 32-bit in the register
- PROBE_MEM32 adds 64-bit kern_vm_start address (which is stored in %r12 in the prologue)
Due to bpf_arena constructions such %r12 + %reg + off16 access is guaranteed
to be within arena virtual range, so no address check at run-time.
- PROBE_MEM32 allows STX and ST. If they fault the store is a nop.
When LDX faults the destination register is zeroed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-4-alexei.starovoitov@gmail.com
|
|
LLVM generates rX = addr_space_cast(rY, dst_addr_space, src_addr_space)
instruction when pointers in non-zero address space are used by the bpf
program. Recognize this insn in uapi and in bpf disassembler.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-3-alexei.starovoitov@gmail.com
|
|
Introduce bpf_arena, which is a sparse shared memory region between the bpf
program and user space.
Use cases:
1. User space mmap-s bpf_arena and uses it as a traditional mmap-ed
anonymous region, like memcached or any key/value storage. The bpf
program implements an in-kernel accelerator. XDP prog can search for
a key in bpf_arena and return a value without going to user space.
2. The bpf program builds arbitrary data structures in bpf_arena (hash
tables, rb-trees, sparse arrays), while user space consumes it.
3. bpf_arena is a "heap" of memory from the bpf program's point of view.
The user space may mmap it, but bpf program will not convert pointers
to user base at run-time to improve bpf program speed.
Initially, the kernel vm_area and user vma are not populated. User space
can fault in pages within the range. While servicing a page fault,
bpf_arena logic will insert a new page into the kernel and user vmas. The
bpf program can allocate pages from that region via
bpf_arena_alloc_pages(). This kernel function will insert pages into the
kernel vm_area. The subsequent fault-in from user space will populate that
page into the user vma. The BPF_F_SEGV_ON_FAULT flag at arena creation time
can be used to prevent fault-in from user space. In such a case, if a page
is not allocated by the bpf program and not present in the kernel vm_area,
the user process will segfault. This is useful for use cases 2 and 3 above.
bpf_arena_alloc_pages() is similar to user space mmap(). It allocates pages
either at a specific address within the arena or allocates a range with the
maple tree. bpf_arena_free_pages() is analogous to munmap(), which frees
pages and removes the range from the kernel vm_area and from user process
vmas.
bpf_arena can be used as a bpf program "heap" of up to 4GB. The speed of
bpf program is more important than ease of sharing with user space. This is
use case 3. In such a case, the BPF_F_NO_USER_CONV flag is recommended.
It will tell the verifier to treat the rX = bpf_arena_cast_user(rY)
instruction as a 32-bit move wX = wY, which will improve bpf prog
performance. Otherwise, bpf_arena_cast_user is translated by JIT to
conditionally add the upper 32 bits of user vm_start (if the pointer is not
NULL) to arena pointers before they are stored into memory. This way, user
space sees them as valid 64-bit pointers.
Diff https://github.com/llvm/llvm-project/pull/84410 enables LLVM BPF
backend generate the bpf_addr_space_cast() instruction to cast pointers
between address_space(1) which is reserved for bpf_arena pointers and
default address space zero. All arena pointers in a bpf program written in
C language are tagged as __attribute__((address_space(1))). Hence, clang
provides helpful diagnostics when pointers cross address space. Libbpf and
the kernel support only address_space == 1. All other address space
identifiers are reserved.
rX = bpf_addr_space_cast(rY, /* dst_as */ 1, /* src_as */ 0) tells the
verifier that rX->type = PTR_TO_ARENA. Any further operations on
PTR_TO_ARENA register have to be in the 32-bit domain. The verifier will
mark load/store through PTR_TO_ARENA with PROBE_MEM32. JIT will generate
them as kern_vm_start + 32bit_addr memory accesses. The behavior is similar
to copy_from_kernel_nofault() except that no address checks are necessary.
The address is guaranteed to be in the 4GB range. If the page is not
present, the destination register is zeroed on read, and the operation is
ignored on write.
rX = bpf_addr_space_cast(rY, 0, 1) tells the verifier that rX->type =
unknown scalar. If arena->map_flags has BPF_F_NO_USER_CONV set, then the
verifier converts such cast instructions to mov32. Otherwise, JIT will emit
native code equivalent to:
rX = (u32)rY;
if (rY)
rX |= clear_lo32_bits(arena->user_vm_start); /* replace hi32 bits in rX */
After such conversion, the pointer becomes a valid user pointer within
bpf_arena range. The user process can access data structures created in
bpf_arena without any additional computations. For example, a linked list
built by a bpf program can be walked natively by user space.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Barret Rhoden <brho@google.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-2-alexei.starovoitov@gmail.com
|
|
When creating a helper to allocate and align an skb one location where
the skb data size was updated was missed. This can lead to a warning
being printed when the memory is being unmapped as it now always unmap
the maximum frame size, instead of the size after it have been
aligned.
This was correctly done for RZ/G2L but missed for R-Car.
Fixes: cfbad64706c1 ("ravb: Create helper to allocate skb and align it")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240308224237.496924-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20240308162606.1597287-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core instead
of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Move amt driver to leverage the core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20240308162606.1597287-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The family struct is auto-generated for new families, support
use of the sock_priv_* mechanism added in commit a731132424ad
("genetlink: introduce per-sock family private storage").
For example if the family wants to use struct sk_buff as its
private struct (unrealistic but just for illustration), it would
add to its spec:
kernel-family:
headers: [ "linux/skbuff.h" ]
sock-priv: struct sk_buff
ynl-gen-c will declare the appropriate priv size and hook
in function prototypes to be implemented by the family.
Link: https://lore.kernel.org/r/20240308190319.2523704-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit e8a6c515ff5f ("tools: ynl: allow user to pass enum string
instead of scalar value") added a semicolon at the end of a line.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240308192555.2550253-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Get rid of ipv6_skb_net() which is only used in ipv6_hop_ioam().
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://lore.kernel.org/r/20240308185343.39272-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
selftests: mptcp: various improvements
In this series from Geliang, there are various improvements in MPTCP
selftests: sharing code, doing actions the same way, colours, etc.
Patch 1 prints all error messages to stdout: what was done in almost all
other MPTCP selftests. This can be now easily changed later if needed.
Patch 2 makes sure the test counter is continuous in mptcp_connect.sh.
Patch 3 aligns the messages that are printed in mptcp_connect.sh.
Patch 4 prints each test results in mptcp_sockopt.sh, similar to what we
have in the TAP output.
Patch 5 moves the different test counters to a single one in
mptcp_lib.sh, to uniform how it is used.
Patch 6 moves how titles are printed from mptcp_join.sh to the lib, to
be reused in patch 7 by all other MPTCP selftests.
Patch 8 uses the '+=' operator to append strings instead of repeating
twice the variable name: that's shorter, easier to read.
Patch 9 adds colours for the [ OK ], [SKIP], [FAIL] and INFO keywords in
all MPTCP selftests.
Patch 10 to 12 are some preparation patches for patch 13: patch 10
modifies how some 'test_fail' helpers, patch 11 moves a helper from
userspace_pm.sh to the lib, and patch 12 changes where titles are
printed in userspace_pm.sh. Patch 13 moves some duplicated helpers from
mptcp_join.sh and userspace_pm.sh to mptcp_lib.sh.
Patch 14 moves duplicated read-only variables from mptcp_join.sh and
userspace_pm.sh to mptcp_lib.sh as well.
Patch 15 uses explicit variables instead of hard-coded numbers for the
exit status.
====================
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-0-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch uses the public var KSFT_SKIP in mptcp_lib.sh instead of
ksft_skip, and drop 'ksft_skip=4' in mptcp_join.sh.
Use KSFT_PASS and KSFT_FAIL macros instead of 0 and 1 after 'exit '
and 'ret=' in all scripts:
exit 0 -> exit ${KSFT_PASS}
exit 1 -> exit ${KSFT_FAIL}
ret=0 -> ret=${KSFT_PASS}
ret=1 -> ret=${KSFT_FAIL}
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-15-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MPTCP event macros (SUB_ESTABLISHED, LISTENER_CREATED, LISTENER_CLOSED),
and the protocol family macros (AF_INET, AF_INET6) are defined in both
mptcp_join.sh and userspace_pm.sh. In order not to duplicate code, this
patch declares them all in mptcp_lib.sh with MPTCP_LIB_ prefixs.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-14-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To avoid duplicated code in different MPTCP selftests, we can add and use
helpers defined in mptcp_lib.sh.
The helper verify_listener_events() is defined both in mptcp_join.sh and
userspace_pm.sh, export it into mptcp_lib.sh and rename it with mptcp_lib_
prefix. Use this new helper in both scripts.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-13-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
verify_listener_events() helper will be exported into mptcp_lib.sh as a
public function, but print_test() is invoked in it, which is a private
function in userspace_pm.sh only. So this patch moves print_test() out of
verify_listener_events().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-12-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extract the main part of check_expected() in userspace_pm.sh to a new
function mptcp_lib_check_expected() in mptcp_lib.sh. It will be used
in both mptcp_john.sh and userspace_pm.sh. check_expected_one() is
moved into mptcp_lib.sh too as mptcp_lib_check_expected_one().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-11-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch modifies test_fail() to call mptcp_lib_pr_fail() only if there
are arguments (if [ ${#} -gt 0 ]) in userspace_pm.sh, add arguments
"unexpected type: ${type}" when calling test_fail() from test_remove().
Then mptcp_lib_pr_fail() can be used in check_expected_one() instead of
test_fail().
The same in mptcp_join.sh, calling fail_test() without argument, and adapt
this helper not to call print_fail() in this case.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-10-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To unify the output formats of all test scripts, this patch adds
four more helpers:
mptcp_lib_pr_ok()
mptcp_lib_pr_skip()
mptcp_lib_pr_fail()
mptcp_lib_pr_info()
to print out [ OK ], [SKIP], [FAIL] and 'INFO: ' with colors. Use them
in all scripts to print the "ok/skip/fail/info' using the same 'format'.
Having colors helps to quickly identify issues when looking at a long
list of output logs and results.
Note that now all print the same keywords, which was not the case
before, but it is good to uniform that.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-9-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch uses addition assignment operator (+=) to append strings
instead of duplicating the variable name in mptcp_connect.sh and
mptcp_join.sh.
This can make the statements shorter.
Note: in mptcp_connect.sh, add a local variable extra in do_transfer to
save the various extra warning logs, using += to append it. And add a
new variable tc_info to save various tc info, also using += to append it.
This can make the code more readable and prepare for the next commit.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-8-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds a new helper mptcp_lib_print_title(), a wrapper of
mptcp_lib_inc_test_counter() and mptcp_lib_pr_title_counter(), to
print out test counter in each test result and increase the counter.
Use this helper to print out test counters for every tests in diag.sh,
mptcp_connect.sh, mptcp_sockopt.sh, pm_netlink.sh, simult_flows.sh,
and userspace_pm.sh.
diag.sh:
01 no msk on netns creation [ ok ]
02 listen match for dport 10000 [ ok ]
03 listen match for sport 10000 [ ok ]
04 listen match for saddr and sport [ ok ]
05 all listen sockets [ ok ]
mptcp_connect.sh:
01 New MPTCP socket can be blocked via sysctl [ OK ]
02 Validating network environment with pings [ OK ]
INFO: Using loss of 0.85% delay 31 ms reorder .. with delay 7ms on ns3eth4
03 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 69ms) [ OK ]
04 ns1 MPTCP -> ns1 (10.0.1.1:10001 ) TCP (duration 20ms) [ OK ]
05 ns1 TCP -> ns1 (10.0.1.1:10002 ) MPTCP (duration 16ms) [ OK ]
mptcp_sockopt.sh:
01 Transfer v4 [ OK ]
02 Mark v4 [ OK ]
03 Transfer v6 [ OK ]
04 Mark v6 [ OK ]
05 SOL_MPTCP sockopt v4 [ OK ]
pm_netlink.sh:
01 defaults addr list [ OK ]
02 simple add/get addr [ OK ]
03 dump addrs [ OK ]
04 simple del addr [ OK ]
05 dump addrs after del [ OK ]
simult_flows.sh:
01 balanced bwidth 7391 max 8456 [ OK ]
02 balanced bwidth - reverse direction 7403 max 8456 [ OK ]
03 balanced bwidth with unbalanced delay 7429 max 8456 [ OK ]
04 balanced bwidth with unbalanced delay - reverse ... 7485 max 8456 [ OK ]
05 unbalanced bwidth 7549 max 8456 [ OK ]
userspace_pm.sh:
01 Created network namespaces ns1, ns2 [ OK ]
INFO: Make connections
02 Established IPv4 MPTCP Connection ns2 => ns1 [ OK ]
03 Established IPv6 MPTCP Connection ns2 => ns1 [ OK ]
INFO: Announce tests
04 ADD_ADDR 10.0.2.2 (ns2) => ns1, invalid token [ OK ]
05 ADD_ADDR id:67 10.0.2.2 (ns2) => ns1, reuse port [ OK ]
Having test counters helps to quickly identify issues when looking at a
long list of output logs and results.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-7-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds a new variable MPTCP_LIB_TEST_FORMAT as the test title
printing format. Also add a helper mptcp_lib_print_title() to use this
format to print the test title with test counters. They are used in
mptcp_join.sh first.
Each MPTCP selftest is having subtests, and it helps to give them a
number to quickly identify them. This can be managed by mptcp_lib.sh,
reusing what has been done here. The following commit will use these
new helpers in the other tests.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-6-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Variable TEST_COUNT are used in mptcp_connect.sh and mptcp_join.sh as
test counters, which are initialized to 0, while variable test_cnt are used
in diag.sh and simult_flows.sh, which are initialized to 1. To maintain
consistency, this patch renames them all as MPTCP_LIB_TEST_COUNTER,
initializes it to 1, and exports it into mptcp_lib.sh.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-5-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only total test results are printed out in mptcp_sockopt.sh:
PASS: all packets had packet mark set
PASS: SOL_MPTCP getsockopt has expected information
PASS: TCP_INQ cmsg/ioctl -t tcp
PASS: TCP_INQ cmsg/ioctl -6 -t tcp
PASS: TCP_INQ cmsg/ioctl -r tcp
PASS: TCP_INQ cmsg/ioctl -6 -r tcp
PASS: TCP_INQ cmsg/ioctl -r tcp -t tcp
They mismatch with the test results:
ok 1 - mptcp_sockopt: mark ipv4
ok 2 - mptcp_sockopt: transfer ipv4
ok 3 - mptcp_sockopt: mark ipv6
ok 4 - mptcp_sockopt: transfer ipv6
ok 5 - mptcp_sockopt: sockopt v4
ok 6 - mptcp_sockopt: sockopt v6
ok 7 - mptcp_sockopt: TCP_INQ: -t tcp
ok 8 - mptcp_sockopt: TCP_INQ: -6 -t tcp
ok 9 - mptcp_sockopt: TCP_INQ: -r tcp
ok 10 - mptcp_sockopt: TCP_INQ: -6 -r tcp
ok 11 - mptcp_sockopt: TCP_INQ: -r tcp -t tcp
'mptcp_sockopt.sh' now display more detailed results + why (what you had
in a former patch from v6, merged here). It no longer displays 'PASS:',
because it is duplicated info now that the detailed are displayed:
Transfer v4 [ OK ]
Mark v4 [ OK ]
Transfer v6 [ OK ]
Mark v6 [ OK ]
SOL_MPTCP sockopt v4 [ OK ]
SOL_MPTCP sockopt v6 [ OK ]
TCP_INQ cmsg/ioctl -t tcp [ OK ]
TCP_INQ cmsg/ioctl -6 -t tcp [ OK ]
TCP_INQ cmsg/ioctl -r tcp [ OK ]
TCP_INQ cmsg/ioctl -6 -r tcp [ OK ]
TCP_INQ cmsg/ioctl -r tcp -t tcp [ OK ]
Also fix the TAP output:
ok 1 - mptcp_sockopt: transfer ipv4
ok 2 - mptcp_sockopt: mark ipv4
ok 3 - mptcp_sockopt: transfer ipv6
ok 4 - mptcp_sockopt: mark ipv6
ok 5 - mptcp_sockopt: sockopt v4
ok 6 - mptcp_sockopt: sockopt v6
ok 7 - mptcp_sockopt: TCP_INQ: -t tcp
ok 8 - mptcp_sockopt: TCP_INQ: -6 -t tcp
ok 9 - mptcp_sockopt: TCP_INQ: -r tcp
ok 10 - mptcp_sockopt: TCP_INQ: -6 -r tcp
ok 11 - mptcp_sockopt: TCP_INQ: -r tcp -t tcp
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-4-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The first [ OK ] in the output of mptcp_connect.sh misaligns with the
others:
New MPTCP socket can be blocked via sysctl [ OK ]
INFO: validating network environment with pings
INFO: Using loss of 0.85% delay 16 ms reorder 95% 70% with delay 4ms on
ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 184ms) [ OK ]
ns1 MPTCP -> ns1 (10.0.1.1:10001 ) TCP (duration 50ms) [ OK ]
ns1 TCP -> ns1 (10.0.1.1:10002 ) MPTCP (duration 55ms) [ OK ]
This patch aligns them by using 69 chars to display the first two lines,
and 50 chars for the other. Since 19 chars are used to display duration
time. Also print out a [ OK ] at the end of the 2nd line for consistency.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-3-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds a new dedicated counter 'port' instead of TEST_COUNT
to increase port numbers in mptcp_connect.sh.
This can avoid outputting discontinuous test counters.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-2-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some error messages are printed to stderr while the others are printed
to 'stdout'. As part of the unification, this patch drop "1>&2" to let
all errors messages are printed to 'stdout'.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-1-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/9684419fd714cc489a3ef36d838d3717bb6aec6d.1709886922.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A large set of updates and features for timers and timekeeping:
- The hierarchical timer pull model
When timer wheel timers are armed they are placed into the timer
wheel of a CPU which is likely to be busy at the time of expiry.
This is done to avoid wakeups on potentially idle CPUs.
This is wrong in several aspects:
1) The heuristics to select the target CPU are wrong by
definition as the chance to get the prediction right is
close to zero.
2) Due to #1 it is possible that timers are accumulated on
a single target CPU
3) The required computation in the enqueue path is just overhead
for dubious value especially under the consideration that the
vast majority of timer wheel timers are either canceled or
rearmed before they expire.
The timer pull model avoids the above by removing the target
computation on enqueue and queueing timers always on the CPU on
which they get armed.
This is achieved by having separate wheels for CPU pinned timers
and global timers which do not care about where they expire.
As long as a CPU is busy it handles both the pinned and the global
timers which are queued on the CPU local timer wheels.
When a CPU goes idle it evaluates its own timer wheels:
- If the first expiring timer is a pinned timer, then the global
timers can be ignored as the CPU will wake up before they
expire.
- If the first expiring timer is a global timer, then the expiry
time is propagated into the timer pull hierarchy and the CPU
makes sure to wake up for the first pinned timer.
The timer pull hierarchy organizes CPUs in groups of eight at the
lowest level and at the next levels groups of eight groups up to
the point where no further aggregation of groups is required, i.e.
the number of levels is log8(NR_CPUS). The magic number of eight
has been established by experimention, but can be adjusted if
needed.
In each group one busy CPU acts as the migrator. It's only one CPU
to avoid lock contention on remote timer wheels.
The migrator CPU checks in its own timer wheel handling whether
there are other CPUs in the group which have gone idle and have
global timers to expire. If there are global timers to expire, the
migrator locks the remote CPU timer wheel and handles the expiry.
Depending on the group level in the hierarchy this handling can
require to walk the hierarchy downwards to the CPU level.
Special care is taken when the last CPU goes idle. At this point
the CPU is the systemwide migrator at the top of the hierarchy and
it therefore cannot delegate to the hierarchy. It needs to arm its
own timer device to expire either at the first expiring timer in
the hierarchy or at the first CPU local timer, which ever expires
first.
This completely removes the overhead from the enqueue path, which
is e.g. for networking a true hotpath and trades it for a slightly
more complex idle path.
This has been in development for a couple of years and the final
series has been extensively tested by various teams from silicon
vendors and ran through extensive CI.
There have been slight performance improvements observed on network
centric workloads and an Intel team confirmed that this allows them
to power down a die completely on a mult-die socket for the first
time in a mostly idle scenario.
There is only one outstanding ~1.5% regression on a specific
overloaded netperf test which is currently investigated, but the
rest is either positive or neutral performance wise and positive on
the power management side.
- Fixes for the timekeeping interpolation code for cross-timestamps:
cross-timestamps are used for PTP to get snapshots from hardware
timers and interpolated them back to clock MONOTONIC. The changes
address a few corner cases in the interpolation code which got the
math and logic wrong.
- Simplifcation of the clocksource watchdog retry logic to
automatically adjust to handle larger systems correctly instead of
having more incomprehensible command line parameters.
- Treewide consolidation of the VDSO data structures.
- The usual small improvements and cleanups all over the place"
* tag 'timers-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
timer/migration: Fix quick check reporting late expiry
tick/sched: Fix build failure for CONFIG_NO_HZ_COMMON=n
vdso/datapage: Quick fix - use asm/page-def.h for ARM64
timers: Assert no next dyntick timer look-up while CPU is offline
tick: Assume timekeeping is correctly handed over upon last offline idle call
tick: Shut down low-res tick from dying CPU
tick: Split nohz and highres features from nohz_mode
tick: Move individual bit features to debuggable mask accesses
tick: Move got_idle_tick away from common flags
tick: Assume the tick can't be stopped in NOHZ_MODE_INACTIVE mode
tick: Move broadcast cancellation up to CPUHP_AP_TICK_DYING
tick: Move tick cancellation up to CPUHP_AP_TICK_DYING
tick: Start centralizing tick related CPU hotplug operations
tick/sched: Don't clear ts::next_tick again in can_stop_idle_tick()
tick/sched: Rename tick_nohz_stop_sched_tick() to tick_nohz_full_stop_tick()
tick: Use IS_ENABLED() whenever possible
tick/sched: Remove useless oneshot ifdeffery
tick/nohz: Remove duplicate between lowres and highres handlers
tick/nohz: Remove duplicate between tick_nohz_switch_to_nohz() and tick_setup_sched_timer()
hrtimer: Select housekeeping CPU during migration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Thomas Gleixner:
"Updates for timekeeping and PTP core.
The cross-timestamp mechanism which allows to correlate hardware
clocks uses clocksource pointers for describing the correlation.
That's suboptimal as drivers need to obtain the pointer, which
requires needless exports and exposing internals. This can all be
completely avoided by assigning clocksource IDs and using them for
describing the correlated clock source.
So this adds clocksource IDs to all clocksources in the tree which can
be exposed to this mechanism and removes the pointer and now needless
exports.
A related improvement for the core and the correlation handling has
not made it this time, but is expected to get ready for the next
round"
* tag 'timers-ptp-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kvmclock: Unexport kvmclock clocksource
treewide: Remove system_counterval_t.cs, which is never read
timekeeping: Evaluate system_counterval_t.cs_id instead of .cs
ptp/kvm, arm_arch_timer: Set system_counterval_t.cs_id to constant
x86/kvm, ptp/kvm: Add clocksource ID, set system_counterval_t.cs_id
x86/tsc: Add clocksource ID, set system_counterval_t.cs_id
timekeeping: Add clocksource ID to struct system_counterval_t
x86/tsc: Correct kernel-doc notation
|
|
Petr Machata says:
====================
mlxsw: Support for nexthop group statistics
ECMP is a fundamental component in L3 designs. However, it's fragile. Many
factors influence whether an ECMP group will operate as intended: hash
policy (i.e. the set of fields that contribute to ECMP hash calculation),
neighbor validity, hash seed (which might lead to polarization) or the type
of ECMP group used (hash-threshold or resilient).
At the same time, collection of statistics that would help an operator
determine that the group performs as desired, is difficult.
Support for nexthop group statistics and their HW collection has been
introduced recently. In this patch set, add HW stats collection support
to mlxsw.
This patchset progresses as follows:
- Patches #1 and #2 add nexthop IDs to notifiers.
- Patches #3 and #4 are code-shaping.
- Patches #5, #6 and #7 adjust the flow counter code.
- Patches #8 and #9 add HW nexthop counters.
- Patch #10 adjusts the HW counter code to allow sharing the same counter
for several resilient group buckets with the same NH ID.
- Patch #11 adds a selftest.
====================
Link: https://lore.kernel.org/r/cover.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add to lib.sh support for fetching NH stats, and a new library,
router_mpath_nh_lib.sh, with the common code for testing NH stats.
Use the latter from router_mpath_nh.sh and router_mpath_nh_res.sh.
The test works by sending traffic through a NH group, and checking that the
reported values correspond to what the link that ultimately receives the
traffic reports having seen.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/2a424c54062a5f1efd13b9ec5b2b0e29c6af2574.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull cpu core updates from Thomas Gleixner:
"A small boring set of cleanups for the SMP and CPU hotplug code"
* tag 'smp-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Remove stray semicolon
smp: Make __smp_processor_id() 0-argument macro
cpu: Mark cpu_possible_mask as __ro_after_init
kernel/cpu: Convert snprintf() to sysfs_emit()
cpu/hotplug: Delete an extraneous kernel-doc description
|
|
For resilient groups, we can reuse the same counter for all the buckets
that share the same nexthop. Keep a reference count per counter, and keep
all these counters in a per-next hop group xarray, which serves as a
NHID->counter cache. If a counter is already present for a given NHID, just
take a reference and use the same counter.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/cdd00084533fc83ac5917562f54642f008205bf3.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When hw_stats is set on a group, install nexthop counters on members of a
group.
Counter allocation request is moved from nexthop object initialization to
the update code. The previous placement made sense: when the counters are
enabled by dpipe, the counters are installed to all existing nexthops and
all nexthops created from then on get them. For the finer-grained nexthop
group statistics, this is unsuitable. The existing placement was kept for
the IPv4 and IPv6 nexthops.
Resilient group replacement emits a pre_replace notification, and then any
bucket_replace notifications if there were any replacements at all. If the
group is balanced and the nexthop composition of the replaced group didn't
change, there will be no such notifiers. Therefore hook to the pre_replace
notifier and mark all buckets for update, to un/install the counters.
When reporting deltas for resilient groups, use the nexthop ID that we
stored in a previous patch to look up to which nexthop a bucket
contributes.
Co-developed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/87495a72f187df2e5d491d02729c550d235fcc85.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The core interfaces for collecting per-NH statistics are built around
nexthops even for resilient groups. Because mlxsw models each bucket as a
nexthop, the core next hop that a given bucket contributes to needs to be
looked up. In order to be able to match the two up, we need to track
nexthop ID for members of group nexthop objects. For simplicity, do it for
all nexthop objects, not just group members.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/184ceb6b154e08f5bcf116a705b0fcb01c31895c.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The next patch will add the ability to share nexthop counters among
mlxsw nexthops backed by the same core nexthop. To have a place to store
reference count, the counter should be kept in a dedicated structure. In
this patch, introduce the structure together with the related helpers, sans
the refcount, which comes in the next patch.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/61f23fa4f8c5d7879f68dacd793d8ab7425f33c0.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlxsw_sp_nexthop_counter_disable() decays to a nop when called on a
disabled counter, but mlxsw_sp_nexthop_counter_enable() can't similarly
be called on an enabled counter. This would be useful in the following
patches. Add the missing condition.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/0cc9050e196366c1387ab5ee47f1cee8ecde9c86.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the report_delta-like interface like a previous patch has added for
collection of NH group statistics, it's easiest to read the counter and
have the HW clear it right away. Thus, change mlxsw_sp_flow_counter_get()
to take a bool indicating whether this should be done.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/6a096ede8ee92d5041e3832242c3bbc137198aba.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to be able to diagnose failures in counter allocation, have the
function mlxsw_sp_nexthop_counter_enable() return an error code.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/e0bb5c0cc6234ade2ade1e92abac991359c3f446.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function mlxsw_sp_nexthop_counter_alloc() doesn't directly allocate
anything, and mlxsw_sp_nexthop_counter_free() doesn't directly free. For
the following patches, we will need names for functions that actually do
those things. Therefore rename to mlxsw_sp_nexthop_counter_enable() and
mlxsw_sp_nexthop_counter_disable() to free up the namespace.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/f59272958697a718f090f59f892d32beabcd8972.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When sending the notifications to collect NH statistics for resilient
groups, the driver will need to know the nexthop IDs in individual buckets
to look up the right counter. To that end, move the nexthop ID from struct
nh_notifier_grp_entry_info to nh_notifier_single_info.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/8f964cd50b1a56d3606ce7ab4c50354ae019c43b.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The NEXTHOP_EVENT_RES_TABLE_PRE_REPLACE notifier currently keeps the group
ID unset. That makes it impossible to look up the group for which the
notifier is intended. This is not an issue at the moment, because the only
client is netdevsim, and that just so that it veto replacements, which is a
static property not tied to a particular group. But for any practical use,
the ID is necessary. Set it.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/025fef095dcfb408042568bb5439da014d47239e.1709901020.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move gro_find_receive_by_type() and gro_find_complete_by_type()
to include/net/gro.h where they belong.
Also use _NET_GRO_H instead of _NET_IPV6_GRO_H to protect
include/net/gro.h from multiple inclusions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240308102230.296224-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the unknown device, rtl8152_cfgselector_choose_configuration()
should return a negative value. Then, usb_choose_configuration() would
set a configuration for CDC ECM or NCM mode. Otherwise, there is no
usb interface driver for the device.
Fixes: aa4f2b3e418e ("r8152: Choose our USB config with choose_configuration() rather than probe()")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20240308075206.33553-436-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a space (' ') prefix to every userdata line to match docs for
dev-kmsg. To account for this extra character in each userdata entry,
reduce userdata entry names (directory name) from 54 characters to 53.
According to the dev-kmsg docs, a space is used for subsequent lines to
mark them as continuation lines.
> A line starting with ' ', is a continuation line, adding
> key/value pairs to the log message, which provide the machine
> readable context of the message, for reliable processing in
> userspace.
Testing for this patch::
cd /sys/kernel/config/netconsole && mkdir cmdline0
cd cmdline0
mkdir userdata/test && echo "hello" > userdata/test/value
mkdir userdata/test2 && echo "hello2" > userdata/test2/value
echo "message" > /dev/kmsg
Outputs::
6.8.0-rc5-virtme,12,493,231373579,-;message
test=hello
test2=hello2
And I confirmed all testing works as expected from the original patchset
Fixes: df03f830d099 ("net: netconsole: cache userdata formatted string in netconsole_target")
Signed-off-by: Matthew Wood <thepacketgeek@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240308002525.248672-1-thepacketgeek@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI interrupt subsystem and initial RISC-V MSI
support.
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes"
* tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA
x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search
genirq/matrix: Dynamic bitmap allocation
irqchip/riscv-intc: Add support for RISC-V AIA
irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore
irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe()
irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure
irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode
irqchip/sifive-plic: Use devm_xyz() for managed allocation
irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz()
irqchip/sifive-plic: Convert PLIC driver into a platform driver
irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
irqchip/riscv-intc: Allow large non-standard interrupt number
genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens
irqchip/imx-intmux: Handle pure domain searches correctly
genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV
genirq/irqdomain: Reroute device MSI create_mapping
genirq/msi: Provide allocation/free functions for "wired" MSI interrupts
genirq/msi: Optionally use dev->fwnode for device domain
genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Make affinity changes take effect immediately for interrupt
threads. This reduces the impact on isolated CPUs as it pulls over
the thread right away instead of doing it after the next hardware
interrupt arrived.
- Cleanup and improvements for the interrupt chip simulator
- Deduplication of the interrupt descriptor initialization code so
the sparse and non-sparse mode share more code.
Drivers:
- A set of conversions to platform_drivers::remove_new() which gets
rid of the pointless return value.
- A new driver for the Starfive JH8100 SoC
- Support for Amlogic-T7 SoCs
- Improvement for the interrupt handling and EOI management for the
loongson interrupt controller.
- The usual fixes and improvements all over the place"
* tag 'irq-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
irqchip/ts4800: Convert to platform_driver::remove_new() callback
irqchip/stm32-exti: Convert to platform_driver::remove_new() callback
irqchip/renesas-rza1: Convert to platform_driver::remove_new() callback
irqchip/renesas-irqc: Convert to platform_driver::remove_new() callback
irqchip/renesas-intc-irqpin: Convert to platform_driver::remove_new() callback
irqchip/pruss-intc: Convert to platform_driver::remove_new() callback
irqchip/mvebu-pic: Convert to platform_driver::remove_new() callback
irqchip/madera: Convert to platform_driver::remove_new() callback
irqchip/ls-scfg-msi: Convert to platform_driver::remove_new() callback
irqchip/keystone: Convert to platform_driver::remove_new() callback
irqchip/imx-irqsteer: Convert to platform_driver::remove_new() callback
irqchip/imx-intmux: Convert to platform_driver::remove_new() callback
irqchip/imgpdc: Convert to platform_driver::remove_new() callback
irqchip: Add StarFive external interrupt controller
dt-bindings: interrupt-controller: Add starfive,jh8100-intc
arm64: dts: Add gpio_intc node for Amlogic-T7 SoCs
irqchip/meson-gpio: Add support for Amlogic-T7 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic-T7 SoCs
irqchip/vic: Fix a kernel-doc warning
genirq: Wake interrupt threads immediately when changing affinity
...
|
|
Switch to new function phy_support_eee. This allows to simplify
the code because data->tx_lpi_enabled is now populated by
phy_ethtool_get_eee().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/92462328-5c9b-4d82-9ce4-ea974cda4900@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Handling case err == 0 in the other branch allows to simplify the
code. In addition I assume in "err & phydev->eee_cfg.tx_lpi_enabled"
it should have been a logical and operator. It works as expected also
with the bitwise and, but using a bitwise and with a bool value looks
ugly to me.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/de37bf30-61dd-49f9-b645-2d8ea11ddb5d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240307122346.3677534-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Disable LEDs just before resetting the MT7530 to avoid
situations where the ESW_P4_LED_0 and ESW_P3_LED_0 pin
states may cause an unintended external crystal frequency
to be selected.
The HT_XTAL_FSEL (External Crystal Frequency Selection)
field of HWTRAP (the Hardware Trap register) stores a
2-bit value that represents the state of the ESW_P4_LED_0
and ESW_P4_LED_0 pins (seemingly) sampled just after the
MT7530 has been reset, as:
ESW_P4_LED_0 ESW_P3_LED_0 Frequency
-----------------------------------------
0 1 20MHz
1 0 40MHz
1 1 25MHz
The value of HT_XTAL_FSEL is bootstrapped by pulling
ESW_P4_LED_0 and ESW_P3_LED_0 up or down accordingly,
but:
if a 40MHz crystal has been selected and
the ESW_P3_LED_0 pin is high during reset,
or a 20MHz crystal has been selected and
the ESW_P4_LED_0 pin is high during reset,
then the value of HT_XTAL_FSEL will indicate
that a 25MHz crystal is present.
By default, the state of the LED pins is PHY controlled
to reflect the link state.
To illustrate, if a board has:
5 ports with active low LED control,
and HT_XTAL_FSEL bootstrapped for 40MHz.
When the MT7530 is powered up without any external
connection, only the LED associated with Port 3 is
illuminated as ESW_P3_LED_0 is low.
In this state, directly after mt7530_setup()'s reset
is performed, the HWTRAP register (0x7800) reflects
the intended HT_XTAL_FSEL (HWTRAP bits 10:9) of 40MHz:
mt7530-mdio mdio-bus:1f: mt7530_read: 00007800 == 00007dcf
>>> bin(0x7dcf >> 9 & 0b11)
'0b10'
But if a cable is connected to Port 3 and the link
is active before mt7530_setup()'s reset takes place,
then HT_XTAL_FSEL seems to be set for 25MHz:
mt7530-mdio mdio-bus:1f: mt7530_read: 00007800 == 00007fcf
>>> bin(0x7fcf >> 9 & 0b11)
'0b11'
Once HT_XTAL_FSEL reflects 25MHz, none of the ports
are functional until the MT7621 (or MT7530 itself)
is reset.
By disabling the LED pins just before reset, the chance
of an unintended HT_XTAL_FSEL value is reduced.
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Link: https://lore.kernel.org/r/20240305043952.21590-1-justin.swartz@risingedge.co.za
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240307122231.3677241-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the ptp_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240305-ptp-v1-1-ed253eb33c20@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set eswitch inline-mode to be u8, not u16. Otherwise, errors below
$ devlink dev eswitch set pci/0000:08:00.0 mode switchdev \
inline-mode network
Error: Attribute failed policy validation.
kernel answers: Numerical result out of rang
netlink: 'devlink': attribute type 26 has an invalid length.
Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240310164547.35219-1-witu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mitigation for RFDS requires RFDS_CLEAR capability which is enumerated
by MSR_IA32_ARCH_CAPABILITIES bit 27. If the host has it set, export it
to guests so that they can deploy the mitigation.
RFDS_NO indicates that the system is not vulnerable to RFDS, export it
to guests so that they don't deploy the mitigation unnecessarily. When
the host is not affected by X86_BUG_RFDS, but has RFDS_NO=0, synthesize
RFDS_NO to the guest.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
RFDS is a CPU vulnerability that may allow userspace to infer kernel
stale data previously used in floating point registers, vector registers
and integer registers. RFDS only affects certain Intel Atom processors.
Intel released a microcode update that uses VERW instruction to clear
the affected CPU buffers. Unlike MDS, none of the affected cores support
SMT.
Add RFDS bug infrastructure and enable the VERW based mitigation by
default, that clears the affected buffers just before exiting to
userspace. Also add sysfs reporting and cmdline parameter
"reg_file_data_sampling" to control the mitigation.
For details see:
Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Add the documentation for transient execution vulnerability Register
File Data Sampling (RFDS) that affects Intel Atom CPUs.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Currently MMIO Stale Data mitigation for CPUs not affected by MDS/TAA is
to only deploy VERW at VMentry by enabling mmio_stale_data_clear static
branch. No mitigation is needed for kernel->user transitions. If such
CPUs are also affected by RFDS, its mitigation may set
X86_FEATURE_CLEAR_CPU_BUF to deploy VERW at kernel->user and VMentry.
This could result in duplicate VERW at VMentry.
Fix this by disabling mmio_stale_data_clear static branch when
X86_FEATURE_CLEAR_CPU_BUF is enabled.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"A quiet cycle. One trivial doc update patch. Two patches to drop the
now defunct memory_spread_slab feature from cgroup1 cpuset"
* tag 'cgroup-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Mark memory_spread_slab as obsolete
cgroup/cpuset: Remove cpuset_do_slab_mem_spread()
docs: cgroup-v1: add missing code-block tags
|
|
ynl-gen-c.py supports check unterminated-ok, but the yaml schemas don't
have this key. Add this to the yaml files.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240308081239.3281710-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support using pre-defined values in checks so we don't need to use hard
code number for the string, binary length. e.g. we have a definition like
#define TEAM_STRING_MAX_LEN 32
Which defined in yaml like:
definitions:
-
name: string-max-len
type: const
value: 32
It can be used in the attribute-sets like
attribute-sets:
-
name: attr-option
name-prefix: team-attr-option-
attributes:
-
name: name
type: string
checks:
len: string-max-len
With this patch it will be converted to
[TEAM_ATTR_OPTION_NAME] = { .type = NLA_STRING, .len = TEAM_STRING_MAX_LEN, }
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240311140727.109562-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue BH conversions from Tejun Heo:
"This contains two patches that convert tasklet users to BH workqueues:
backtracetest and usb hcd.
DM conversions are being routed through the respective subsystem tree.
Hopefully, the next cycle will see a lot more conversions"
* tag 'wq-for-6.9-bh-conversions' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
usb: core: hcd: Convert from tasklet to BH workqueue
backtracetest: Convert from tasklet to BH workqueue
|
|
The check is duplicated in 2 places, factor it out into a common helper.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20240308204500.1112858-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull workqueue updates from Tejun Heo:
"This cycle, a lot of workqueue changes including some that are
significant and invasive.
- During v6.6 cycle, unbound workqueues were updated so that they are
more topology aware and flexible, which among other things improved
workqueue behavior on modern multi-L3 CPUs. In the process, commit
636b927eba5b ("workqueue: Make unbound workqueues to use per-cpu
pool_workqueues") switched unbound workqueues to use per-CPU
frontend pool_workqueues as a part of increasing front-back mapping
flexibility.
An unwelcome side effect of this change was that this made max
concurrency enforcement per-CPU blowing up the maximum number of
allowed concurrent executions. I incorrectly assumed that this
wouldn't cause practical problems as most unbound workqueue users
are self-regulate max concurrency; however, there definitely are
which don't (e.g. on IO paths) and the drastic increase in the
allowed max concurrency led to noticeable perf regressions in some
use cases.
This is now addressed by separating out max concurrency enforcement
to a separate struct - wq_node_nr_active - which makes @max_active
consistently mean system-wide max concurrency regardless of the
number of CPUs or (finally) NUMA nodes. This is a rather invasive
and, in places, a bit clunky; however, the clunkiness rises from
the the inherent requirement to handle the disagreement between the
execution locality domain and max concurrency enforcement domain on
some modern machines.
See commit 5797b1c18919 ("workqueue: Implement system-wide
nr_active enforcement for unbound workqueues") for more details.
- BH workqueue support is added.
They are similar to per-CPU workqueues but execute work items in
the softirq context. This is expected to replace tasklet. However,
currently, it's missing the ability to disable and enable work
items which is needed to convert many tasklet users. To avoid
crowding this merge window too much, this will be included in the
next merge window. A separate pull request will be sent for the
couple conversion patches that are currently pending.
- Waiman plugged a long-standing hole in workqueue CPU isolation
where ordered workqueues didn't follow wq_unbound_cpumask updates.
Ordered workqueues now follow the same rules as other unbound
workqueues.
- More CPU isolation improvements: Juri fixed another deficit in
workqueue isolation where unbound rescuers don't respect
wq_unbound_cpumask. Leonardo fixed delayed_work timers firing on
isolated CPUs.
- Other misc changes"
* tag 'wq-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (54 commits)
workqueue: Drain BH work items on hot-unplugged CPUs
workqueue: Introduce from_work() helper for cleaner callback declarations
workqueue: Control intensive warning threshold through cmdline
workqueue: Make @flags handling consistent across set_work_data() and friends
workqueue: Remove clear_work_data()
workqueue: Factor out work_grab_pending() from __cancel_work_sync()
workqueue: Clean up enum work_bits and related constants
workqueue: Introduce work_cancel_flags
workqueue: Use variable name irq_flags for saving local irq flags
workqueue: Reorganize flush and cancel[_sync] functions
workqueue: Rename __cancel_work_timer() to __cancel_timer_sync()
workqueue: Use rcu_read_lock_any_held() instead of rcu_read_lock_held()
workqueue: Cosmetic changes
workqueue, irq_work: Build fix for !CONFIG_IRQ_WORK
workqueue: Fix queue_work_on() with BH workqueues
async: Use a dedicated unbound workqueue with raised min_active
workqueue: Implement workqueue_set_min_active()
workqueue: Fix kernel-doc comment of unplug_oldest_pwq()
workqueue: Bind unbound workqueue rescuer to wq_unbound_cpumask
kernel/workqueue: Let rescuers follow unbound wq cpumask changes
...
|
|
Pull Rust updates from Miguel Ojeda:
"Another routine one in terms of features. We got two version upgrades
this time, but in terms of lines, 'alloc' changes are not very large.
Toolchain and infrastructure:
- Upgrade to Rust 1.76.0
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. These allow us to remove
two more unstable features ('const_maybe_uninit_zeroed' and
'ptr_metadata') from the list, among other improvements
- Mark 'rustc' (and others) invocations as recursive, which fixes a
new warning and prepares us for the future in case we eventually
take advantage of the Make jobserver
'kernel' crate:
- Add the 'container_of!' macro
- Stop using the unstable 'ptr_metadata' feature by employing the now
stable 'byte_sub' method to implement 'Arc::from_raw()'
- Add the 'time' module with a 'msecs_to_jiffies()' conversion
function to begin with, to be used by Rust Binder
- Add 'notify_sync()' and 'wait_interruptible_timeout()' methods to
'CondVar', to be used by Rust Binder
- Update integer types for 'CondVar'
- Rename 'wait_list' field to 'wait_queue_head' in 'CondVar'
- Implement 'Display' and 'Debug' for 'BStr'
- Add the 'try_from_foreign()' method to the 'ForeignOwnable' trait
- Add reexports for macros so that they can be used from the right
module (in addition to the root)
- A series of code documentation improvements, including adding
intra-doc links, consistency improvements, typo fixes...
'macros' crate:
- Place generated 'init_module()' function in '.init.text'
Documentation:
- Add documentation on Rust doctests and how they work"
* tag 'rust-6.9' of https://github.com/Rust-for-Linux/linux: (29 commits)
rust: upgrade to Rust 1.76.0
kbuild: mark `rustc` (and others) invocations as recursive
rust: add `container_of!` macro
rust: str: implement `Display` and `Debug` for `BStr`
rust: module: place generated init_module() function in .init.text
rust: types: add `try_from_foreign()` method
docs: rust: Add description of Rust documentation test as KUnit ones
docs: rust: Move testing to a separate page
rust: kernel: stop using ptr_metadata feature
rust: kernel: add reexports for macros
rust: locked_by: shorten doclink preview
rust: kernel: remove unneeded doclink targets
rust: kernel: add doclinks
rust: kernel: add blank lines in front of code blocks
rust: kernel: mark code fragments in docs with backticks
rust: kernel: unify spelling of refcount in docs
rust: str: move SAFETY comment in front of unsafe block
rust: str: use `NUL` instead of 0 in doc comments
rust: kernel: add srctree-relative doclinks
rust: ioctl: end top-level module docs with full stop
...
|
|
Pull compiler attributes update from Miguel Ojeda:
"Trivial fixes to the __counted_by comments"
* tag 'compiler-attributes-6.9' of https://github.com/ojeda/linux:
Compiler Attributes: counted_by: fixup clang URL
Compiler Attributes: counted_by: bump min gcc version
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/boqun/linux
Pull RCU updates from Boqun Feng:
- Eliminate deadlocks involving do_exit() and RCU tasks, by Paul:
Instead of SRCU read side critical sections, now a percpu list is
used in do_exit() for scaning yet-to-exit tasks
- Fix a deadlock due to the dependency between workqueue and RCU
expedited grace period, reported by Anna-Maria Behnsen and Thomas
Gleixner and fixed by Frederic: Now RCU expedited always uses its own
kthread worker instead of a workqueue
- RCU NOCB updates, code cleanups, unnecessary barrier removals and
minor bug fixes
- Maintain real-time response in rcu_tasks_postscan() and a minor fix
for tasks trace quiescence check
- Misc updates, comments and readibility improvement, boot time
parameter for lazy RCU and rcutorture improvement
- Documentation updates
* tag 'rcu.next.v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/boqun/linux: (34 commits)
rcu-tasks: Maintain real-time response in rcu_tasks_postscan()
rcu-tasks: Eliminate deadlocks involving do_exit() and RCU tasks
rcu-tasks: Maintain lists to eliminate RCU-tasks/do_exit() deadlocks
rcu-tasks: Initialize data to eliminate RCU-tasks/do_exit() deadlocks
rcu-tasks: Initialize callback lists at rcu_init() time
rcu-tasks: Add data to eliminate RCU-tasks/do_exit() deadlocks
rcu-tasks: Repair RCU Tasks Trace quiescence check
rcu/sync: remove un-used rcu_sync_enter_start function
rcutorture: Suppress rtort_pipe_count warnings until after stalls
srcu: Improve comments about acceleration leak
rcu: Provide a boot time parameter to control lazy RCU
rcu: Rename jiffies_till_flush to jiffies_lazy_flush
doc: Update checklist.rst discussion of callback execution
doc: Clarify use of slab constructors and SLAB_TYPESAFE_BY_RCU
context_tracking: Fix kerneldoc headers for __ct_user_{enter,exit}()
doc: Add EARLY flag to early-parsed kernel boot parameters
doc: Add CONFIG_RCU_STRICT_GRACE_PERIOD to checklist.rst
doc: Make checklist.rst note that spinlocks are implied RCU readers
doc: Make whatisRCU.rst note that spinlocks are RCU readers
doc: Spinlocks are implied RCU readers
...
|
|
Pull block updates from Jens Axboe:
- MD pull requests via Song:
- Cleanup redundant checks (Yu Kuai)
- Remove deprecated headers (Marc Zyngier, Song Liu)
- Concurrency fixes (Li Lingfeng)
- Memory leak fix (Li Nan)
- Refactor raid1 read_balance (Yu Kuai, Paul Luse)
- Clean up and fix for md_ioctl (Li Nan)
- Other small fixes (Gui-Dong Han, Heming Zhao)
- MD atomic limits (Christoph)
- NVMe pull request via Keith:
- RDMA target enhancements (Max)
- Fabrics fixes (Max, Guixin, Hannes)
- Atomic queue_limits usage (Christoph)
- Const use for class_register (Ricardo)
- Identification error handling fixes (Shin'ichiro, Keith)
- Improvement and cleanup for cached request handling (Christoph)
- Moving towards atomic queue limits. Core changes and driver bits so
far (Christoph)
- Fix UAF issues in aoeblk (Chun-Yi)
- Zoned fix and cleanups (Damien)
- s390 dasd cleanups and fixes (Jan, Miroslav)
- Block issue timestamp caching (me)
- noio scope guarding for zoned IO (Johannes)
- block/nvme PI improvements (Kanchan)
- Ability to terminate long running discard loop (Keith)
- bdev revalidation fix (Li)
- Get rid of old nr_queues hack for kdump kernels (Ming)
- Support for async deletion of ublk (Ming)
- Improve IRQ bio recycling (Pavel)
- Factor in CPU capacity for remote vs local completion (Qais)
- Add shared_tags configfs entry for null_blk (Shin'ichiro
- Fix for a regression in page refcounts introduced by the folio
unification (Tony)
- Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid,
Ricardo, Roman, Tang, Uwe)
* tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits)
block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC
block/swim: Convert to platform remove callback returning void
cdrom: gdrom: Convert to platform remove callback returning void
block: remove disk_stack_limits
md: remove mddev->queue
md: don't initialize queue limits
md/raid10: use the atomic queue limit update APIs
md/raid5: use the atomic queue limit update APIs
md/raid1: use the atomic queue limit update APIs
md/raid0: use the atomic queue limit update APIs
md: add queue limit helpers
md: add a mddev_is_dm helper
md: add a mddev_add_trace_msg helper
md: add a mddev_trace_remap helper
bcache: move calculation of stripe_size and io_opt into bcache_device_init
virtio_blk: Do not use disk_set_max_open/active_zones()
aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts
block: move capacity validation to blkpg_do_ioctl()
block: prevent division by zero in blk_rq_stat_sum()
drbd: atomically update queue limits in drbd_reconsider_queue_parameters
...
|
|
Pull io_uring updates from Jens Axboe:
- Make running of task_work internal loops more fair, and unify how the
different methods deal with them (me)
- Support for per-ring NAPI. The two minor networking patches are in a
shared branch with netdev (Stefan)
- Add support for truncate (Tony)
- Export SQPOLL utilization stats (Xiaobing)
- Multishot fixes (Pavel)
- Fix for a race in manipulating the request flags via poll (Pavel)
- Cleanup the multishot checking by making it generic, moving it out of
opcode handlers (Pavel)
- Various tweaks and cleanups (me, Kunwu, Alexander)
* tag 'for-6.9/io_uring-20240310' of git://git.kernel.dk/linux: (53 commits)
io_uring: Fix sqpoll utilization check racing with dying sqpoll
io_uring/net: dedup io_recv_finish req completion
io_uring: refactor DEFER_TASKRUN multishot checks
io_uring: fix mshot io-wq checks
io_uring/net: add io_req_msg_cleanup() helper
io_uring/net: simplify msghd->msg_inq checking
io_uring/kbuf: rename REQ_F_PARTIAL_IO to REQ_F_BL_NO_RECYCLE
io_uring/net: remove dependency on REQ_F_PARTIAL_IO for sr->done_io
io_uring/net: correctly handle multishot recvmsg retry setup
io_uring/net: clear REQ_F_BL_EMPTY in the multishot retry handler
io_uring: fix io_queue_proc modifying req->flags
io_uring: fix mshot read defer taskrun cqe posting
io_uring/net: fix overflow check in io_recvmsg_mshot_prep()
io_uring/net: correct the type of variable
io_uring/sqpoll: statistics of the true utilization of sq threads
io_uring/net: move recv/recvmsg flags out of retry loop
io_uring/kbuf: flag request if buffer pool is empty after buffer pick
io_uring/net: improve the usercopy for sendmsg/recvmsg
io_uring/net: move receive multishot out of the generic msghdr path
io_uring/net: unify how recvmsg and sendmsg copy in the msghdr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs uuid updates from Christian Brauner:
"This adds two new ioctl()s for getting the filesystem uuid and
retrieving the sysfs path based on the path of a mounted filesystem.
Getting the filesystem uuid has been implemented in filesystem
specific code for a while it's now lifted as a generic ioctl"
* tag 'vfs-6.9.uuid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
xfs: add support for FS_IOC_GETFSSYSFSPATH
fs: add FS_IOC_GETFSSYSFSPATH
fat: Hook up sb->s_uuid
fs: FS_IOC_GETUUID
ovl: convert to super_set_uuid()
fs: super_set_uuid()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull block handle updates from Christian Brauner:
"Last cycle we changed opening of block devices, and opening a block
device would return a bdev_handle. This allowed us to implement
support for restricting and forbidding writes to mounted block
devices. It was accompanied by converting and adding helpers to
operate on bdev_handles instead of plain block devices.
That was already a good step forward but ultimately it isn't necessary
to have special purpose helpers for opening block devices internally
that return a bdev_handle.
Fundamentally, opening a block device internally should just be
equivalent to opening files. So now all internal opens of block
devices return files just as a userspace open would. Instead of
introducing a separate indirection into bdev_open_by_*() via struct
bdev_handle bdev_file_open_by_*() is made to just return a struct
file. Opening and closing a block device just becomes equivalent to
opening and closing a file.
This all works well because internally we already have a pseudo fs for
block devices and so opening block devices is simple. There's a few
places where we needed to be careful such as during boot when the
kernel is supposed to mount the rootfs directly without init doing it.
Here we need to take care to ensure that we flush out any asynchronous
file close. That's what we already do for opening, unpacking, and
closing the initramfs. So nothing new here.
The equivalence of opening and closing block devices to regular files
is a win in and of itself. But it also has various other advantages.
We can remove struct bdev_handle completely. Various low-level helpers
are now private to the block layer. Other helpers were simply
removable completely.
A follow-up series that is already reviewed build on this and makes it
possible to remove bdev->bd_inode and allows various clean ups of the
buffer head code as well. All places where we stashed a bdev_handle
now just stash a file and use simple accessors to get to the actual
block device which was already the case for bdev_handle"
* tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
block: remove bdev_handle completely
block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access
bdev: remove bdev pointer from struct bdev_handle
bdev: make struct bdev_handle private to the block layer
bdev: make bdev_{release, open_by_dev}() private to block layer
bdev: remove bdev_open_by_path()
reiserfs: port block device access to file
ocfs2: port block device access to file
nfs: port block device access to files
jfs: port block device access to file
f2fs: port block device access to files
ext4: port block device access to file
erofs: port device access to file
btrfs: port device access to file
bcachefs: port block device access to file
target: port block device access to file
s390: port block device access to file
nvme: port block device access to file
block2mtd: port device access to files
bcache: port block device access to files
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull file locking updates from Christian Brauner:
"A few years ago struct file_lock_context was added to allow for
separate lists to track different types of file locks instead of using
a singly-linked list for all of them.
Now leases no longer need to be tracked using struct file_lock.
However, a lot of the infrastructure is identical for leases and locks
so separating them isn't trivial.
This splits a group of fields used by both file locks and leases into
a new struct file_lock_core. The new core struct is embedded in struct
file_lock. Coccinelle was used to convert a lot of the callers to deal
with the move, with the remaining 25% or so converted by hand.
Afterwards several internal functions in fs/locks.c are made to work
with struct file_lock_core. Ultimately this allows to split struct
file_lock into struct file_lock and struct file_lease. The file lease
APIs are then converted to take struct file_lease"
* tag 'vfs-6.9.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (51 commits)
filelock: fix deadlock detection in POSIX locking
filelock: always define for_each_file_lock()
smb: remove redundant check
filelock: don't do security checks on nfsd setlease calls
filelock: split leases out of struct file_lock
filelock: remove temporary compatibility macros
smb/server: adapt to breakup of struct file_lock
smb/client: adapt to breakup of struct file_lock
ocfs2: adapt to breakup of struct file_lock
nfsd: adapt to breakup of struct file_lock
nfs: adapt to breakup of struct file_lock
lockd: adapt to breakup of struct file_lock
fuse: adapt to breakup of struct file_lock
gfs2: adapt to breakup of struct file_lock
dlm: adapt to breakup of struct file_lock
ceph: adapt to breakup of struct file_lock
afs: adapt to breakup of struct file_lock
9p: adapt to breakup of struct file_lock
filelock: convert seqfile handling to use file_lock_core
filelock: convert locks_translate_pid to take file_lock_core
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pdfd updates from Christian Brauner:
- Until now pidfds could only be created for thread-group leaders but
not for threads. There was no technical reason for this. We simply
had no users that needed support for this. Now we do have users that
need support for this.
This introduces a new PIDFD_THREAD flag for pidfd_open(). If that
flag is set pidfd_open() creates a pidfd that refers to a specific
thread.
In addition, we now allow clone() and clone3() to be called with
CLONE_PIDFD | CLONE_THREAD which wasn't possible before.
A pidfd that refers to an individual thread differs from a pidfd that
refers to a thread-group leader:
(1) Pidfds are pollable. A task may poll a pidfd and get notified
when the task has exited.
For thread-group leader pidfds the polling task is woken if the
thread-group is empty. In other words, if the thread-group
leader task exits when there are still threads alive in its
thread-group the polling task will not be woken when the
thread-group leader exits but rather when the last thread in the
thread-group exits.
For thread-specific pidfds the polling task is woken if the
thread exits.
(2) Passing a thread-group leader pidfd to pidfd_send_signal() will
generate thread-group directed signals like kill(2) does.
Passing a thread-specific pidfd to pidfd_send_signal() will
generate thread-specific signals like tgkill(2) does.
The default scope of the signal is thus determined by the type
of the pidfd.
Since use-cases exist where the default scope of the provided
pidfd needs to be overriden the following flags are added to
pidfd_send_signal():
- PIDFD_SIGNAL_THREAD
Send a thread-specific signal.
- PIDFD_SIGNAL_THREAD_GROUP
Send a thread-group directed signal.
- PIDFD_SIGNAL_PROCESS_GROUP
Send a process-group directed signal.
The scope change will only work if the struct pid is actually
used for this scope.
For example, in order to send a thread-group directed signal the
provided pidfd must be used as a thread-group leader and
similarly for PIDFD_SIGNAL_PROCESS_GROUP the struct pid must be
used as a process group leader.
- Move pidfds from the anonymous inode infrastructure to a tiny pseudo
filesystem. This will unblock further work that we weren't able to do
simply because of the very justified limitations of anonymous inodes.
Moving pidfds to a tiny pseudo filesystem allows for statx on pidfds
to become useful for the first time. They can now be compared by
inode number which are unique for the system lifetime.
Instead of stashing struct pid in file->private_data we can now stash
it in inode->i_private. This makes it possible to introduce concepts
that operate on a process once all file descriptors have been closed.
A concrete example is kill-on-last-close. Another side-effect is that
file->private_data is now freed up for per-file options for pidfds.
Now, each struct pid will refer to a different inode but the same
struct pid will refer to the same inode if it's opened multiple
times. In contrast to now where each struct pid refers to the same
inode.
The tiny pseudo filesystem is not visible anywhere in userspace
exactly like e.g., pipefs and sockfs. There's no lookup, there's no
complex inode operations, nothing. Dentries and inodes are always
deleted when the last pidfd is closed.
We allocate a new inode and dentry for each struct pid and we reuse
that inode and dentry for all pidfds that refer to the same struct
pid. The code is entirely optional and fairly small. If it's not
selected we fallback to anonymous inodes. Heavily inspired by nsfs.
The dentry and inode allocation mechanism is moved into generic
infrastructure that is now shared between nsfs and pidfs. The
path_from_stashed() helper must be provided with a stashing location,
an inode number, a mount, and the private data that is supposed to be
used and it will provide a path that can be passed to dentry_open().
The helper will try retrieve an existing dentry from the provided
stashing location. If a valid dentry is found it is reused. If not a
new one is allocated and we try to stash it in the provided location.
If this fails we retry until we either find an existing dentry or the
newly allocated dentry could be stashed. Subsequent openers of the
same namespace or task are then able to reuse it.
- Currently it is only possible to get notified when a task has exited,
i.e., become a zombie and userspace gets notified with EPOLLIN. We
now also support waiting until the task has been reaped, notifying
userspace with EPOLLHUP.
- Ensure that ESRCH is reported for getfd if a task is exiting instead
of the confusing EBADF.
- Various smaller cleanups to pidfd functions.
* tag 'vfs-6.9.pidfd' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (23 commits)
libfs: improve path_from_stashed()
libfs: add stashed_dentry_prune()
libfs: improve path_from_stashed() helper
pidfs: convert to path_from_stashed() helper
nsfs: convert to path_from_stashed() helper
libfs: add path_from_stashed()
pidfd: add pidfs
pidfd: move struct pidfd_fops
pidfd: allow to override signal scope in pidfd_send_signal()
pidfd: change pidfd_send_signal() to respect PIDFD_THREAD
signal: fill in si_code in prepare_kill_siginfo()
selftests: add ESRCH tests for pidfd_getfd()
pidfd: getfd should always report ESRCH if a task is exiting
pidfd: clone: allow CLONE_THREAD | CLONE_PIDFD together
pidfd: exit: kill the no longer used thread_group_exited()
pidfd: change do_notify_pidfd() to use __wake_up(poll_to_key(EPOLLIN))
pid: kill the obsolete PIDTYPE_PID code in transfer_pid()
pidfd: kill the no longer needed do_notify_pidfd() in de_thread()
pidfd_poll: report POLLHUP when pid_task() == NULL
pidfd: implement PIDFD_THREAD flag for pidfd_open()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull iomap updates from Christian Brauner:
- Restore read-write hints in struct bio through the bi_write_hint
member for the sake of UFS devices in mobile applications. This can
result in up to 40% lower write amplification in UFS devices. The
patch series that builds on this will be coming in via the SCSI
maintainers (Bart)
- Overhaul the iomap writeback code. Afterwards ->map_blocks() is able
to map multiple blocks at once as long as they're in the same folio.
This reduces CPU usage for buffered write workloads on e.g., xfs on
systems with lots of cores (Christoph)
- Record processed bytes in iomap_iter() trace event (Kassey)
- Extend iomap_writepage_map() trace event after Christoph's
->map_block() changes to map mutliple blocks at once (Zhang)
* tag 'vfs-6.9.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
iomap: Add processed for iomap_iter
iomap: add pos and dirty_len into trace_iomap_writepage_map
block, fs: Restore the per-bio/request data lifetime fields
fs: Propagate write hints to the struct block_device inode
fs: Move enum rw_hint into a new header file
fs: Split fcntl_rw_hint()
fs: Verify write lifetime constants at compile time
fs: Fix rw_hint validation
iomap: pass the length of the dirty region to ->map_blocks
iomap: map multiple blocks at a time
iomap: submit ioends immediately
iomap: factor out a iomap_writepage_map_block helper
iomap: only call mapping_set_error once for each failed bio
iomap: don't chain bios
iomap: move the iomap_sector sector calculation out of iomap_add_to_ioend
iomap: clean up the iomap_alloc_ioend calling convention
iomap: move all remaining per-folio logic into iomap_writepage_map
iomap: factor out a iomap_writepage_handle_eof helper
iomap: move the PF_MEMALLOC check to iomap_writepages
iomap: move the io_folios field out of struct iomap_ioend
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull ntfs update from Christian Brauner:
"This removes the old ntfs driver. The new ntfs3 driver is a full
replacement that was merged over two years ago. We've went through
various userspace and either they use ntfs3 or they use the fuse
version of ntfs and thus build neither ntfs nor ntfs3. I think that's
a clear sign that we should risk removing the legacy ntfs driver.
Quoting from Arch Linux and Debian:
- Debian does neither build the legacy ntfs nor the new ntfs3:
"Not currently built with Debian's kernel packages, 'ntfs' has been
symlinked to 'ntfs-3g' as it relates to fstab and mount commands.
Debian kernels are built without support of the ntfs3 driver
developed by Paragon Software." (cf. [2])
- Archlinux provides ntfs3 as their default since 5.15:
"All officially supported kernels with versions 5.15 or newer are
built with CONFIG_NTFS3_FS=m and thus support it. Before 5.15,
NTFS read and write support is provided by the NTFS-3G FUSE file
system." (cf. [1]).
It's unmaintained apart from various odd fixes as well. Worst case we
have to reintroduce it if someone really has a valid dependency on it.
But it's worth trying to see whether we can remove it"
Link: https://wiki.archlinux.org/title/NTFS [1]
Link: https://wiki.debian.org/NTFS [2]
* tag 'vfs-6.9.ntfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: remove NTFS classic from docum. index
fs: Remove NTFS classic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Misc features, cleanups, and fixes for vfs and individual filesystems.
Features:
- Support idmapped mounts for hugetlbfs.
- Add RWF_NOAPPEND flag for pwritev2(). This allows us to fix a bug
where the passed offset is ignored if the file is O_APPEND. The new
flag allows a caller to enforce that the offset is honored to
conform to posix even if the file was opened in append mode.
- Move i_mmap_rwsem in struct address_space to avoid false sharing
between i_mmap and i_mmap_rwsem.
- Convert efs, qnx4, and coda to use the new mount api.
- Add a generic is_dot_dotdot() helper that's used by various
filesystems and the VFS code instead of open-coding it multiple
times.
- Recently we've added stable offsets which allows stable ordering
when iterating directories exported through NFS on e.g., tmpfs
filesystems. Originally an xarray was used for the offset map but
that caused slab fragmentation issues over time. This switches the
offset map to the maple tree which has a dense mode that handles
this scenario a lot better. Includes tests.
- Finally merge the case-insensitive improvement series Gabriel has
been working on for a long time. This cleanly propagates case
insensitive operations through ->s_d_op which in turn allows us to
remove the quite ugly generic_set_encrypted_ci_d_ops() operations.
It also improves performance by trying a case-sensitive comparison
first and then fallback to case-insensitive lookup if that fails.
This also fixes a bug where overlayfs would be able to be mounted
over a case insensitive directory which would lead to all sort of
odd behaviors.
Cleanups:
- Make file_dentry() a simple accessor now that ->d_real() is
simplified because of the backing file work we did the last two
cycles.
- Use the dedicated file_mnt_idmap helper in ntfs3.
- Use smp_load_acquire/store_release() in the i_size_read/write
helpers and thus remove the hack to handle i_size reads in the
filemap code.
- The SLAB_MEM_SPREAD is a nop now. Remove it from various places in
fs/
- It's no longer necessary to perform a second built-in initramfs
unpack call because we retain the contents of the previous
extraction. Remove it.
- Now that we have removed various allocators kfree_rcu() always
works with kmem caches and kmalloc(). So simplify various places
that only use an rcu callback in order to handle the kmem cache
case.
- Convert the pipe code to use a lockdep comparison function instead
of open-coding the nesting making lockdep validation easier.
- Move code into fs-writeback.c that was located in a header but can
be made static as it's only used in that one file.
- Rewrite the alignment checking iterators for iovec and bvec to be
easier to read, and also significantly more compact in terms of
generated code. This saves 270 bytes of text on x86-64 (with
clang-18) and 224 bytes on arm64 (with gcc-13). In profiles it also
saves a bit of time for the same workload.
- Switch various places to use KMEM_CACHE instead of
kmem_cache_create().
- Use inode_set_ctime_to_ts() in inode_set_ctime_current()
- Use kzalloc() in name_to_handle_at() to avoid kernel infoleak.
- Various smaller cleanups for eventfds.
Fixes:
- Fix various comments and typos, and unneeded initializations.
- Fix stack allocation hack for clang in the select code.
- Improve dump_mapping() debug code on a best-effort basis.
- Fix build errors in various selftests.
- Avoid wrap-around instrumentation in various places.
- Don't allow user namespaces without an idmapping to be used for
idmapped mounts.
- Fix sysv sb_read() call.
- Fix fallback implementation of the get_name() export operation"
* tag 'vfs-6.9.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (70 commits)
hugetlbfs: support idmapped mounts
qnx4: convert qnx4 to use the new mount api
fs: use inode_set_ctime_to_ts to set inode ctime to current time
libfs: Drop generic_set_encrypted_ci_d_ops
ubifs: Configure dentry operations at dentry-creation time
f2fs: Configure dentry operations at dentry-creation time
ext4: Configure dentry operations at dentry-creation time
libfs: Add helper to choose dentry operations at mount-time
libfs: Merge encrypted_ci_dentry_ops and ci_dentry_ops
fscrypt: Drop d_revalidate once the key is added
fscrypt: Drop d_revalidate for valid dentries during lookup
fscrypt: Factor out a helper to configure the lookup dentry
ovl: Always reject mounting over case-insensitive directories
libfs: Attempt exact-match comparison first during casefolded lookup
efs: remove SLAB_MEM_SPREAD flag usage
jfs: remove SLAB_MEM_SPREAD flag usage
minix: remove SLAB_MEM_SPREAD flag usage
openpromfs: remove SLAB_MEM_SPREAD flag usage
proc: remove SLAB_MEM_SPREAD flag usage
qnx6: remove SLAB_MEM_SPREAD flag usage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- fix to make kunit_bus_type const
- kunit tool change to Print UML command
- DRM device creation helpers are now using the new kunit device
creation helpers. This change resulted in DRM helpers switching from
using a platform_device, to a dedicated bus and device type used by
kunit. kunit devices don't set DMA mask and this caused regression on
some drm tests as they can't allocate DMA buffers. Fix this problem
by setting DMA masks on the kunit device during initialization.
- KUnit has several macros which accept a log message, which can
contain printf format specifiers. Some of these (the explicit log
macros) already use the __printf() gcc attribute to ensure the format
specifiers are valid, but those which could fail the test, and hence
used __kunit_do_failed_assertion() behind the scenes, did not.
These include: KUNIT_EXPECT_*_MSG(), KUNIT_ASSERT_*_MSG(), and
KUNIT_FAIL()
A nine-patch series adds the __printf() attribute, and fixes all of
the issues uncovered.
* tag 'linux_kselftest-kunit-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Annotate _MSG assertion variants with gnu printf specifiers
drm: tests: Fix invalid printf format specifiers in KUnit tests
drm/xe/tests: Fix printf format specifiers in xe_migrate test
net: test: Fix printf format specifier in skb_segment kunit test
rtc: test: Fix invalid format specifier.
time: test: Fix incorrect format specifier
lib: memcpy_kunit: Fix an invalid format specifier in an assertion msg
lib/cmdline: Fix an invalid format specifier in an assertion msg
kunit: test: Log the correct filter string in executor_test
kunit: Setup DMA masks on the kunit device
kunit: make kunit_bus_type const
kunit: Mark filter* params as rw
kunit: tool: Print UML command
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
- livepatch restructuring to move the module out of lib to be built as
a out-of-tree modules during kselftest build. This makes it easier
change, debug and rebuild the tests by running make on the
selftests/livepatch directory, which is not currently possible since
the modules on lib/livepatch are build and installed using the main
makefile modules target.
- livepatch restructuring fixes for problems found by kernel test
robot. The change skips the test if kernel-devel isn't installed
(default value of KDIR), or if KDIR variable passed doesn't exists.
- resctrl test restructuring and new non-contiguous CBMs CAT test
- new ktap_helpers to print diagnostic messages, pass/fail tests based
on exit code, abort test, and finish the test.
- a new test verify power supply properties.
- a new ftrace to exercise function tracer across cpu hotplug.
- timeout increase for mqueue test to allow the test to run on i3.metal
AWS instances.
- minor spelling corrections in several tests.
- missing gitignore files and changes to existing gitignore files.
* tag 'linux_kselftest-next-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (57 commits)
kselftest: Add basic test for probing the rust sample modules
selftests: lib.mk: Do not process TEST_GEN_MODS_DIR
selftests: livepatch: Avoid running the tests if kernel-devel is missing
selftests: livepatch: Add initial .gitignore
selftests/resctrl: Add non-contiguous CBMs CAT test
selftests/resctrl: Add resource_info_file_exists()
selftests/resctrl: Split validate_resctrl_feature_request()
selftests/resctrl: Add a helper for the non-contiguous test
selftests/resctrl: Add test groups and name L3 CAT test L3_CAT
selftests: sched: Fix spelling mistake "hiearchy" -> "hierarchy"
selftests/mqueue: Set timeout to 180 seconds
selftests/ftrace: Add test to exercize function tracer across cpu hotplug
selftest: ftrace: fix minor typo in log
selftests: thermal: intel: workload_hint: add missing gitignore
selftests: thermal: intel: power_floor: add missing gitignore
selftests: uevent: add missing gitignore
selftests: Add test to verify power supply properties
selftests: ktap_helpers: Add a helper to finish the test
selftests: ktap_helpers: Add a helper to abort the test
selftests: ktap_helpers: Add helper to pass/fail test based on exit code
...
|
|
We already have kprobe and fentry benchmarks. Let's add kretprobe and
fexit ones for completeness.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240309005124.3004446-1-andrii@kernel.org
|
|
ioremap_page_range() should be used for ranges within vmalloc range only.
The vmalloc ranges are allocated by get_vm_area(). PCI has "resource"
allocator that manages PCI_IOBASE, IO_SPACE_LIMIT address range, hence
introduce vmap_page_range() to be used exclusively to map pages
in PCI address space.
Fixes: 3e49a866c9dc ("mm: Enforce VM_IOREMAP flag and range in ioremap_page_range.")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/bpf/CANiq72ka4rir+RTN2FQoT=Vvprp_Ao-CvoYEkSNqtSY+RZj+AA@mail.gmail.com
|
|
'ras/edac-amd-atl' into edac-updates-for-v6.9
* ras/edac-drivers:
EDAC/i10nm: Add Intel Grand Ridge micro-server support
EDAC/igen6: Add one more Intel Alder Lake-N SoC support
* ras/edac-misc:
EDAC/versal: Convert to platform remove callback returning void
EDAC/versal: Make the bit position of injected errors configurable
EDAC/synopsys: Convert to devm_platform_ioremap_resource()
* ras/edac-amd-atl:
RAS/AMD/FMPM: Fix off by one when unwinding on error
RAS/AMD/FMPM: Add debugfs interface to print record entries
RAS/AMD/FMPM: Save SPA values
RAS: Export helper to get ras_debugfs_dir
RAS/AMD/ATL: Fix bit overflow in denorm_addr_df4_np2()
RAS: Introduce a FRU memory poison manager
RAS/AMD/ATL: Add MI300 row retirement support
Documentation: Move RAS section to admin-guide
RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support
RAS/AMD/ATL: Fix array overflow in get_logical_coh_st_fabric_id_mi300()
RAS/AMD/ATL: Add MI300 support
Documentation: RAS: Add index and address translation section
EDAC/amd64: Use new AMD Address Translation Library
RAS: Introduce AMD Address Translation Library
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
Jason Xing says:
====================
annotate data-races around sysctl_tcp_wmem[0]
Adding simple READ_ONCE() can avoid reading the sysctl knob meanwhile
someone is trying to change it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When reading wmem[0], it could be changed concurrently without
READ_ONCE() protection. So add one annotation here.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's possible that writer and the reader can manipulate the same
sysctl knob concurrently. Using READ_ONCE() to prevent reading
an old value.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Running the page-pool sample on production machines under moderate
networking load shows recycling rate higher than 100%:
$ page-pool
eth0[2] page pools: 14 (zombies: 0)
refs: 89088 bytes: 364904448 (refs: 0 bytes: 0)
recycling: 100.3% (alloc: 1392:2290247724 recycle: 469289484:1828235386)
Note that outstanding refs (89088) == slow alloc * cache size (1392 * 64)
which means this machine is recycling page pool pages perfectly, not
a single page has been released.
The extra 0.3% is because sample ignores allocations from the ptr_ring.
Treat those the same as alloc_fast, the ring vs cache alloc is
already captured accurately enough by recycling stats.
With the fix:
$ page-pool
eth0[2] page pools: 14 (zombies: 0)
refs: 89088 bytes: 364904448 (refs: 0 bytes: 0)
recycling: 100.0% (alloc: 1392:2331141604 recycle: 473625579:1857460661)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commits ca065d0cf80f ("udp: no longer use SLAB_DESTROY_BY_RCU")
and 7ae215d23c12 ("bpf: Don't refcount LISTEN sockets in sk_assign()")
UDP early demux no longer need to grab a refcount on the UDP socket.
This save two atomic operations per incoming packet for connected
sockets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Joe Stringer <joe@wand.net.nz>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Gavrilov Ilia says:
====================
fix incorrect parameter validation in the *_get_sockopt() functions
This v2 series fix incorrent parameter validation in *_get_sockopt()
functions in several places.
version 2 changes:
- reword the patch description
- add two patches for net/kcm and net/x25
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.
To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.
To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.
To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.
To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.
Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core")
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'olr' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.
To fix the logic, check 'olr' as read from 'optlen',
where the types of relevant variables are (signed) int.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.
To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Herve Codina says:
====================
Add support for QMC HDLC
This series introduces the QMC HDLC support.
Patches were previously sent as part of a full feature series and were
previously reviewed in that context:
"Add support for QMC HDLC, framer infrastructure and PEF2256 framer" [1]
In order to ease the merge, the full feature series has been split and
needed parts were merged in v6.8-rc1:
- "Prepare the PowerQUICC QMC and TSA for the HDLC QMC driver" [2]
- "Add support for framer infrastructure and PEF2256 framer" [3]
This series contains patches related to the QMC HDLC part (QMC HDLC
driver):
- Introduce the QMC HDLC driver (patches 1 and 2)
- Add timeslots change support in QMC HDLC (patch 3)
- Add framer support as a framer consumer in QMC HDLC (patch 4)
Compare to the original full feature series, a modification was done on
patch 3 in order to use a coherent prefix in the commit title.
I kept the patches unsquashed as they were previously sent and reviewed.
Of course, I can squash them if needed.
Compared to the previous iteration:
https://lore.kernel.org/linux-kernel/20240306080726.167338-1-herve.codina@bootlin.com/
this v7 series mainly:
- Rename a variable.
- Fix reverse xmas tree declarations.
- Add 'Acked-by' tag.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add framer support in the fsl_qmc_hdlc driver in order to be able to
signal carrier changes to the network stack based on the framer status
Also use this framer to provide information related to the E1/T1 line
interface on IF_GET_IFACE and configure the line interface according to
IF_IFACE_{E1,T1} information.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
QMC channels support runtime timeslots changes but nothing is done at
the QMC HDLC driver to handle these changes.
Use existing IFACE ioctl in order to configure the timeslots to use.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These helpers scatters or gathers a bitmap with the help of the mask
position bits parameter.
bitmap_scatter() does the following:
src: 0000000001011010
||||||
+------+|||||
| +----+||||
| |+----+|||
| || +-+||
| || | ||
mask: ...v..vv...v..vv
...0..11...0..10
dst: 0000001100000010
and bitmap_gather() performs this one:
mask: ...v..vv...v..vv
src: 0000001100000010
^ ^^ ^ 0
| || | 10
| || > 010
| |+--> 1010
| +--> 11010
+----> 011010
dst: 0000000000011010
bitmap_gather() can the seen as the reverse bitmap_scatter() operation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230926052007.3917389-3-andriy.shevchenko@linux.intel.com/
Co-developed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After contributing the driver, add myself as the maintainer for the
Freescale QMC HDLC driver.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The QMC HDLC driver provides support for HDLC using the QMC (QUICC
Multichannel Controller) to transfer the HDLC data.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ethtool: ice: Support for RSS settings to GTP
Takeru Hayasaka enables RSS functionality for GTP packets on ice driver
with ethtool.
A user can include TEID and make RSS work for GTP-U over IPv4 by doing the
following:`ethtool -N ens3 rx-flow-hash gtpu4 sde`
In addition to gtpu(4|6), we now support gtpc(4|6),gtpc(4|6)t,gtpu(4|6)e,
gtpu(4|6)u, and gtpu(4|6)d.
gtpc(4|6): Used for GTP-C in IPv4 and IPv6, where the GTP header format does
not include a TEID.
gtpc(4|6)t: Used for GTP-C in IPv4 and IPv6, with a GTP header format that
includes a TEID.
gtpu(4|6): Used for GTP-U in both IPv4 and IPv6 scenarios.
gtpu(4|6)e: Used for GTP-U with extended headers in both IPv4 and IPv6.
gtpu(4|6)u: Used when the PSC (PDU session container) in the GTP-U extended
header includes Uplink, applicable to both IPv4 and IPv6.
gtpu(4|6)d: Used when the PSC in the GTP-U extended header includes Downlink,
for both IPv4 and IPv6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetree fixes for v6.8-final
Starfive:
The previous cleanup broke boot on the jh7100 as the driver depended on
the fallback clock name created based on the node-name when
clock-output-names is not present. Add clock-output-names to restore
working order.
Generic:
BUILTIN_DTB has been broken for ages on any platform other than the
nommu Canaan k210 SoC as the first dtb built (in alphanumerical order),
would get built into the image. This didn't get fixed for ages because
nobody actually cared about running it other than the k210 enough to
fix it. The folks doing Sophgo SG2042 development have come along and
fixed it, as they want to use builtin dtbs. linux-boot on that platform
reuses the dtb it was provided by OpenSBI when booting linux proper,
which is unfortunately not possible to boot a mainline kernel with.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.8-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
Link: https://lore.kernel.org/r/20240306-waltz-facial-9e4e1b792053@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Do not allow large strings (> 4096) as single write to trace_marker
The size of a string written into trace_marker was determined by the
size of the sub-buffer in the ring buffer. That size is dependent on
the PAGE_SIZE of the architecture as it can be mapped into user
space. But on PowerPC, where PAGE_SIZE is 64K, that made the limit of
the string of writing into trace_marker 64K.
One of the selftests looks at the size of the ring buffer sub-buffers
and writes that plus more into the trace_marker. The write will take
what it can and report back what it consumed so that the user space
application (like echo) will write the rest of the string. The string
is stored in the ring buffer and can be read via the "trace" or
"trace_pipe" files.
The reading of the ring buffer uses vsnprintf(), which uses a
precision "%.*s" to make sure it only reads what is stored in the
buffer, as a bug could cause the string to be non terminated.
With the combination of the precision change and the PAGE_SIZE of 64K
allowing huge strings to be added into the ring buffer, plus the test
that would actually stress that limit, a bug was reported that the
precision used was too big for "%.*s" as the string was close to 64K
in size and the max precision of vsnprintf is 32K.
Linus suggested not to have that precision as it could hide a bug if
the string was again stored without a nul byte.
Another issue that was brought up is that the trace_seq buffer is
also based on PAGE_SIZE even though it is not tied to the
architecture limit like the ring buffer sub-buffer is. Having it be
64K * 2 is simply just too big and wasting memory on systems with 64K
page sizes. It is now hardcoded to 8K which is what all other
architectures with 4K PAGE_SIZE has.
Finally, the write to trace_marker is now limited to 4K as there is
no reason to write larger strings into trace_marker.
- ring_buffer_wait() should not loop.
The ring_buffer_wait() does not have the full context (yet) on if it
should loop or not. Just exit the loop as soon as its woken up and
let the callers decide to loop or not (they already do, so it's a bit
redundant).
- Fix shortest_full field to be the smallest amount in the ring buffer
that a waiter is waiting for. The "shortest_full" field is updated
when a new waiter comes in and wants to wait for a smaller amount of
data in the ring buffer than other waiters. But after all waiters are
woken up, it's not reset, so if another waiter comes in wanting to
wait for more data, it will be woken up when the ring buffer has a
smaller amount from what the previous waiters were waiting for.
- The wake up all waiters on close is incorrectly called frome
.release() and not from .flush() so it will never wake up any waiters
as the .release() will not get called until all .read() calls are
finished. And the wakeup is for the waiters in those .read() calls.
* tag 'trace-ring-buffer-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use .flush() call to wake up readers
ring-buffer: Fix resetting of shortest_full
ring-buffer: Fix waking up ring buffer readers
tracing: Limit trace_marker writes to just 4K
tracing: Limit trace_seq size to just 8K and not depend on architecture PAGE_SIZE
tracing: Remove precision vsnprintf() check from print event
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- fixes for Qualcomm qmp-combo driver for ordering of drm and type-c
switch registartion due to drivers might not probe defer after having
registered child devices to avoid triggering a probe deferral loop.
This fixes internal display on Lenovo ThinkPad X13s
* tag 'phy-fixes3-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom-qmp-combo: fix type-c switch registration
phy: qcom-qmp-combo: fix drm bridge registration
|
|
The .release() function does not get called until all readers of a file
descriptor are finished.
If a thread is blocked on reading a file descriptor in ring_buffer_wait(),
and another thread closes the file descriptor, it will not wake up the
other thread as ring_buffer_wake_waiters() is called by .release(), and
that will not get called until the .read() is finished.
The issue originally showed up in trace-cmd, but the readers are actually
other processes with their own file descriptors. So calling close() would wake
up the other tasks because they are blocked on another descriptor then the
one that was closed(). But there's other wake ups that solve that issue.
When a thread is blocked on a read, it can still hang even when another
thread closed its descriptor.
This is what the .flush() callback is for. Have the .flush() wake up the
readers.
Link: https://lore.kernel.org/linux-trace-kernel/20240308202432.107909457@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes: f3ddb74ad0790 ("tracing: Wake up ring buffer waiters on closing of the file")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The "shortest_full" variable is used to keep track of the waiter that is
waiting for the smallest amount on the ring buffer before being woken up.
When a tasks waits on the ring buffer, it passes in a "full" value that is
a percentage. 0 means wake up on any data. 1-100 means wake up from 1% to
100% full buffer.
As all waiters are on the same wait queue, the wake up happens for the
waiter with the smallest percentage.
The problem is that the smallest_full on the cpu_buffer that stores the
smallest amount doesn't get reset when all the waiters are woken up. It
does get reset when the ring buffer is reset (echo > /sys/kernel/tracing/trace).
This means that tasks may be woken up more often then when they want to
be. Instead, have the shortest_full field get reset just before waking up
all the tasks. If the tasks wait again, they will update the shortest_full
before sleeping.
Also add locking around setting of shortest_full in the poll logic, and
change "work" to "rbwork" to match the variable name for rb_irq_work
structures that are used in other places.
Link: https://lore.kernel.org/linux-trace-kernel/20240308202431.948914369@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes: 2c2b0a78b3739 ("ring-buffer: Add percentage of ring buffer full to wake up reader")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
to avoid creating an inconsistent ABI (KVM_MEM_GUEST_MEMFD is not
writable from userspace, so there would be no way to write to a
read-only guest_memfd).
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely for development and testing.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term
plan is to support confidential VMs with deterministic private
memory (SNP and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD dirty logging test that caused false
passes.
x86 fixes:
- Fix missing marking of a guest page as dirty when emulating an
atomic access.
- Check for mmu_notifier invalidation events before faulting in the
pfn, and before acquiring mmu_lock, to avoid unnecessary work and
lock contention with preemptible kernels (including
CONFIG_PREEMPT_DYNAMIC in non-preemptible mode).
- Disable AMD DebugSwap by default, it breaks VMSA signing and will
be re-enabled with a better VM creation API in 6.10.
- Do the cache flush of converted pages in svm_register_enc_region()
before dropping kvm->lock, to avoid a race with unregistering of
the same region and the consequent use-after-free issue"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
SEV: disable SEV-ES DebugSwap by default
KVM: x86/mmu: Retry fault before acquiring mmu_lock if mapping is changing
KVM: SVM: Flush pages under kvm->lock to fix UAF in svm_register_enc_region()
KVM: selftests: Add a testcase to verify GUEST_MEMFD and READONLY are exclusive
KVM: selftests: Create GUEST_MEMFD for relevant invalid flags testcases
KVM: x86/mmu: Restrict KVM_SW_PROTECTED_VM to the TDP MMU
KVM: x86: Update KVM_SW_PROTECTED_VM docs to make it clear they're a WIP
KVM: Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
KVM: x86: Mark target gfn of emulated atomic instruction as dirty
|
|
A task can wait on a ring buffer for when it fills up to a specific
watermark. The writer will check the minimum watermark that waiters are
waiting for and if the ring buffer is past that, it will wake up all the
waiters.
The waiters are in a wait loop, and will first check if a signal is
pending and then check if the ring buffer is at the desired level where it
should break out of the loop.
If a file that uses a ring buffer closes, and there's threads waiting on
the ring buffer, it needs to wake up those threads. To do this, a
"wait_index" was used.
Before entering the wait loop, the waiter will read the wait_index. On
wakeup, it will check if the wait_index is different than when it entered
the loop, and will exit the loop if it is. The waker will only need to
update the wait_index before waking up the waiters.
This had a couple of bugs. One trivial one and one broken by design.
The trivial bug was that the waiter checked the wait_index after the
schedule() call. It had to be checked between the prepare_to_wait() and
the schedule() which it was not.
The main bug is that the first check to set the default wait_index will
always be outside the prepare_to_wait() and the schedule(). That's because
the ring_buffer_wait() doesn't have enough context to know if it should
break out of the loop.
The loop itself is not needed, because all the callers to the
ring_buffer_wait() also has their own loop, as the callers have a better
sense of what the context is to decide whether to break out of the loop
or not.
Just have the ring_buffer_wait() block once, and if it gets woken up, exit
the function and let the callers decide what to do next.
Link: https://lore.kernel.org/all/CAHk-=whs5MdtNjzFkTyaUy=vHi=qwWgPi0JgTe6OYUYMNSRZfg@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240308202431.792933613@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes: e30f53aad2202 ("tracing: Do not busy wait in buffer splice")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Since fscache can utilize iov_iter to write dest buffers, bio_vec can
be used in this way too.
To simplify this, pseudo bios are prepared and bio_vec will be filled
with bio_add_page(). And a common .bi_end_io will be called directly
to handle I/O completions.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240308094159.40547-2-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
So far the fscache mode supports uncompressed data only, and the data
read from fscache is put directly into the target page cache. As the
support for compressed data in fscache mode is going to be introduced,
rework the fscache internals so that the following compressed part
could make the raw data read from fscache be directed to the target
buffer it wants, decompress the raw data, and finally fill the page
cache with the decompressed data.
As the first step, a new structure, i.e. erofs_fscache_io (io), is
introduced to describe a generic read request from the fscache, while
the caller can specify the target buffer it wants in the iov_iter
structure (io->iter). Besides, the caller can also specify its
completion callback and private data through erofs_fscache_io, which
will be called to make further handling, e.g. unlocking the page cache
for uncompressed data or decompressing the read raw data, when the read
request from the fscache completes. Now erofs_fscache_read_io_async()
serves as a generic interface for reading raw data from fscache for both
compressed and uncompressed data.
The erofs_fscache_rq structure is kept to describe a request to fill the
page cache in the specified range.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240308094159.40547-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Lockdep reported the following issue when mounting erofs with a domain_id:
============================================
WARNING: possible recursive locking detected
6.8.0-rc7-xfstests #521 Not tainted
--------------------------------------------
mount/396 is trying to acquire lock:
ffff907a8aaaa0e0 (&type->s_umount_key#50/1){+.+.}-{3:3},
at: alloc_super+0xe3/0x3d0
but task is already holding lock:
ffff907a8aaa90e0 (&type->s_umount_key#50/1){+.+.}-{3:3},
at: alloc_super+0xe3/0x3d0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&type->s_umount_key#50/1);
lock(&type->s_umount_key#50/1);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by mount/396:
#0: ffff907a8aaa90e0 (&type->s_umount_key#50/1){+.+.}-{3:3},
at: alloc_super+0xe3/0x3d0
#1: ffffffffc00e6f28 (erofs_domain_list_lock){+.+.}-{3:3},
at: erofs_fscache_register_fs+0x3d/0x270 [erofs]
stack backtrace:
CPU: 1 PID: 396 Comm: mount Not tainted 6.8.0-rc7-xfstests #521
Call Trace:
<TASK>
dump_stack_lvl+0x64/0xb0
validate_chain+0x5c4/0xa00
__lock_acquire+0x6a9/0xd50
lock_acquire+0xcd/0x2b0
down_write_nested+0x45/0xd0
alloc_super+0xe3/0x3d0
sget_fc+0x62/0x2f0
vfs_get_super+0x21/0x90
vfs_get_tree+0x2c/0xf0
fc_mount+0x12/0x40
vfs_kern_mount.part.0+0x75/0x90
kern_mount+0x24/0x40
erofs_fscache_register_fs+0x1ef/0x270 [erofs]
erofs_fc_fill_super+0x213/0x380 [erofs]
This is because the file_system_type of both erofs and the pseudo-mount
point of domain_id is erofs_fs_type, so two successive calls to
alloc_super() are considered to be using the same lock and trigger the
warning above.
Therefore add a nodev file_system_type called erofs_anon_fs_type in
fscache.c to silence this complaint. Because kern_mount() takes a
pointer to struct file_system_type, not its (string) name. So we don't
need to call register_filesystem(). In addition, call init_pseudo() in
erofs_anon_init_fs_context() as suggested by Al Viro, so that we can
remove erofs_fc_fill_pseudo_super(), erofs_fc_anon_get_tree(), and
erofs_anon_context_ops.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: a9849560c55e ("erofs: introduce a pseudo mnt to manage shared cookies")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-and-tested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20240307101018.2021925-1-libaokun1@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Convert erofs_try_to_free_all_cached_pages() and
z_erofs_cache_release_folio().
Besides, erofs_page_is_managed() is moved to zdata.c and renamed
as erofs_folio_is_managed().
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-6-hsiangkao@linux.alibaba.com
|
|
Use bio_for_each_folio() to iterate over each folio in the bio and
there is no large folios for now.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-5-hsiangkao@linux.alibaba.com
|
|
Introduce a folio member to `struct z_erofs_bvec` and convert most
of z_erofs_fill_bio_vec() to folios, which is still straight-forward.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-4-hsiangkao@linux.alibaba.com
|
|
`justfound` is introduced to identify cached folios that are just added
to compressed bvecs so that more checks can be applied in the I/O
submission path.
EROFS is quite now stable compared to the codebase at that stage.
`justfound` becomes a burden for upcoming features. Drop it.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-3-hsiangkao@linux.alibaba.com
|
|
It is a straight-forward conversion. Besides, it's renamed as
z_erofs_scan_folio().
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-2-hsiangkao@linux.alibaba.com
|
|
Online folios are locked file-backed folios which will eventually
keep decoded (e.g. decompressed) data of each inode for end users to
utilize. It may belong to a few pclusters and contain other data (e.g.
compressed data for inplace I/Os) temporarily in a time-sharing manner
to reduce memory footprints for low-ended storage devices with high
latencies under heary I/O pressure.
Apart from folio_end_read() usage, it's a straight-forward conversion.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-1-hsiangkao@linux.alibaba.com
|
|
We don't need the "out" label any more, so remove "ret" and return
directly on error.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-mm@kvack.org
Cc: linux-fsdevel@vger.kernel.org
|
|
There is no need to call memset(..., 0, ...) on memory allocated by
kcalloc(). It is already zeroed.
Remove the redundant call.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/fa2597400051c18c6ca11187b0e4b906729991b2.1709972649.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Replace open-coded encoding logic with the use of conventional XDR
utility functions. Add a tracepoint to make replays observable in
field troubleshooting situations.
The WARN_ON is removed. A stack trace is of little use, as there is
only one call site for nfsd4_encode_replay(), and a buffer length
shortage here is unlikely.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two patches from Heiner for the i801 are targeting muxes discovered
while working on some other features. Essentially, there is a
reordering when adding optional slaves and proper cleanup upon
registering a mux device.
Christophe fixes the exit path in the wmt driver that was leaving the
clocks hanging, and the last fix from Tommy avoids false error reports
in IRQ"
* tag 'i2c-for-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: aspeed: Fix the dummy irq expected print
i2c: wmt: Fix an error handling path in wmt_i2c_probe()
i2c: i801: Avoid potential double call to gpiod_remove_lookup_table
i2c: i801: Fix using mux_pdev before it's set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A fix to suppress a warning about unreleased IRQ for 1394 OHCI
hardware when disabling MSI.
In Linux kernel v6.5, a PCI driver for 1394 OHCI hardware was
optimized into the managed device resources. Edmund Raile points out
that the change brings the warning about unreleased IRQ at the call of
pci_disable_msi(), since the API expects that the relevant IRQ has
already been released in advance.
As long as the API is called in .remove callback of PCI device
operation, it is prohibited to maintain the IRQ as the part of managed
device resource. As a workaround, the IRQ is explicitly released at
.remove callback, before the call of pci_disable_msi().
pci_disable_msi() is legacy API nowadays in PCI MSI implementation. I
have a plan to replace it with the modern API in the development for
the future version of Linux kernel. So at present I keep them as is"
* tag 'firewire-fixes-6.8-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: prevent leak of left-over IRQ on unbind
|
|
The DebugSwap feature of SEV-ES provides a way for confidential guests to use
data breakpoints. However, because the status of the DebugSwap feature is
recorded in the VMSA, enabling it by default invalidates the attestation
signatures. In 6.10 we will introduce a new API to create SEV VMs that
will allow enabling DebugSwap based on what the user tells KVM to do.
Contextually, we will change the legacy KVM_SEV_ES_INIT API to never
enable DebugSwap.
For compatibility with kernels that pre-date the introduction of DebugSwap,
as well as with those where KVM_SEV_ES_INIT will never enable it, do not enable
the feature by default. If anybody wants to use it, for now they can enable
the sev_es_debug_swap_enabled module parameter, but this will result in a
warning.
Fixes: d1f85fbe836e ("KVM: SEV: Enable data breakpoints in SEV-ES")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
https://github.com/kvm-x86/linux into HEAD
KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avoid creating ABI that KVM can't sanely support.
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely a development and testing vehicle, and
come with zero guarantees.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
is to support confidential VMs with deterministic private memory (SNP
and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD negative test that resulted in false passes
when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged.
|
|
KVM x86 fixes for 6.8, round 2:
- When emulating an atomic access, mark the gfn as dirty in the memslot
to fix a bug where KVM could fail to mark the slot as dirty during live
migration, ultimately resulting in guest data corruption due to a dirty
page not being re-copied from the source to the target.
- Check for mmu_notifier invalidation events before faulting in the pfn,
and before acquiring mmu_lock, to avoid unnecessary work and lock
contention. Contending mmu_lock is especially problematic on preemptible
kernels, as KVM may yield mmu_lock in response to the contention, which
severely degrades overall performance due to vCPUs making it difficult
for the task that triggered invalidation to make forward progress.
Note, due to another kernel bug, this fix isn't limited to preemtible
kernels, as any kernel built with CONFIG_PREEMPT_DYNAMIC=y will yield
contended rwlocks and spinlocks.
https://lore.kernel.org/all/20240110214723.695930-1-seanjc@google.com
|
|
We used bpf_prog_pack to aggregate bpf programs into huge page to
relieve the iTLB pressure on the system. This was merged for ARM64[1]
We can apply it to bpf trampoline as well. This would increase the
preformance of fentry and struct_ops programs.
[1] https://lore.kernel.org/bpf/20240228141824.119877-1-puranjay12@gmail.com/
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Message-ID: <20240304202803.31400-1-puranjay12@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
