diff options
| author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2024-04-23 06:01:39 -0700 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2024-04-23 06:01:39 -0700 |
| commit | 78810b17cbdd12d1c621426b6207f4a9fb5a45e1 (patch) | |
| tree | bebdbc4f72a148749dc203409be0565db680558a | |
| parent | b3ba7ef91130049ca39e9d3884e0a2cd4621f403 (diff) | |
| download | stable-queue-78810b17cbdd12d1c621426b6207f4a9fb5a45e1.tar.gz | |
5.10-stable patches
added patches:
fs-sysfs-fix-reference-leak-in-sysfs_break_active_protection.patch
init-main.c-fix-potential-static_command_line-memory-overflow.patch
mei-me-disable-rpl-s-on-sps-and-ign-firmwares.patch
revert-usb-cdc-wdm-close-race-between-read-and-workqueue.patch
serial-pmac_zilog-remove-flawed-mitigation-for-rx-irq-flood.patch
speakup-avoid-crash-on-very-long-word.patch
usb-disable-usb3-lpm-at-shutdown.patch
usb-dwc2-host-fix-dereference-issue-in-ddma-completion-flow.patch
usb-serial-option-add-fibocom-fm135-gl-variants.patch
usb-serial-option-add-lonsung-u8300-u9300-product.patch
usb-serial-option-add-rolling-rw101-gl-and-rw135-gl-support.patch
usb-serial-option-add-support-for-fibocom-fm650-fg650.patch
usb-serial-option-add-telit-fn920c04-rmnet-compositions.patch
usb-serial-option-support-quectel-em060k-sub-models.patch
15 files changed, 1112 insertions, 0 deletions
diff --git a/queue-5.10/fs-sysfs-fix-reference-leak-in-sysfs_break_active_protection.patch b/queue-5.10/fs-sysfs-fix-reference-leak-in-sysfs_break_active_protection.patch new file mode 100644 index 0000000000..c89d20de9a --- /dev/null +++ b/queue-5.10/fs-sysfs-fix-reference-leak-in-sysfs_break_active_protection.patch @@ -0,0 +1,42 @@ +From a90bca2228c0646fc29a72689d308e5fe03e6d78 Mon Sep 17 00:00:00 2001 +From: Alan Stern <stern@rowland.harvard.edu> +Date: Wed, 13 Mar 2024 17:43:41 -0400 +Subject: fs: sysfs: Fix reference leak in sysfs_break_active_protection() + +From: Alan Stern <stern@rowland.harvard.edu> + +commit a90bca2228c0646fc29a72689d308e5fe03e6d78 upstream. + +The sysfs_break_active_protection() routine has an obvious reference +leak in its error path. If the call to kernfs_find_and_get() fails then +kn will be NULL, so the companion sysfs_unbreak_active_protection() +routine won't get called (and would only cause an access violation by +trying to dereference kn->parent if it was called). As a result, the +reference to kobj acquired at the start of the function will never be +released. + +Fix the leak by adding an explicit kobject_put() call when kn is NULL. + +Signed-off-by: Alan Stern <stern@rowland.harvard.edu> +Fixes: 2afc9166f79b ("scsi: sysfs: Introduce sysfs_{un,}break_active_protection()") +Cc: Bart Van Assche <bvanassche@acm.org> +Cc: stable@vger.kernel.org +Reviewed-by: Bart Van Assche <bvanassche@acm.org> +Acked-by: Tejun Heo <tj@kernel.org> +Link: https://lore.kernel.org/r/8a4d3f0f-c5e3-4b70-a188-0ca433f9e6f9@rowland.harvard.edu +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + fs/sysfs/file.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/fs/sysfs/file.c ++++ b/fs/sysfs/file.c +@@ -429,6 +429,8 @@ struct kernfs_node *sysfs_break_active_p + kn = kernfs_find_and_get(kobj->sd, attr->name); + if (kn) + kernfs_break_active_protection(kn); ++ else ++ kobject_put(kobj); + return kn; + } + EXPORT_SYMBOL_GPL(sysfs_break_active_protection); diff --git a/queue-5.10/init-main.c-fix-potential-static_command_line-memory-overflow.patch b/queue-5.10/init-main.c-fix-potential-static_command_line-memory-overflow.patch new file mode 100644 index 0000000000..43d617a2ed --- /dev/null +++ b/queue-5.10/init-main.c-fix-potential-static_command_line-memory-overflow.patch @@ -0,0 +1,43 @@ +From 46dad3c1e57897ab9228332f03e1c14798d2d3b9 Mon Sep 17 00:00:00 2001 +From: Yuntao Wang <ytcoode@gmail.com> +Date: Fri, 12 Apr 2024 16:17:32 +0800 +Subject: init/main.c: Fix potential static_command_line memory overflow + +From: Yuntao Wang <ytcoode@gmail.com> + +commit 46dad3c1e57897ab9228332f03e1c14798d2d3b9 upstream. + +We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for +static_command_line, but the strings copied into static_command_line are +extra_command_line and command_line, rather than extra_command_line and +boot_command_line. + +When strlen(command_line) > strlen(boot_command_line), static_command_line +will overflow. + +This patch just recovers strlen(command_line) which was miss-consolidated +with strlen(boot_command_line) in the commit f5c7310ac73e ("init/main: add +checks for the return value of memblock_alloc*()") + +Link: https://lore.kernel.org/all/20240412081733.35925-2-ytcoode@gmail.com/ + +Fixes: f5c7310ac73e ("init/main: add checks for the return value of memblock_alloc*()") +Cc: stable@vger.kernel.org +Signed-off-by: Yuntao Wang <ytcoode@gmail.com> +Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + init/main.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/init/main.c ++++ b/init/main.c +@@ -627,6 +627,8 @@ static void __init setup_command_line(ch + if (!saved_command_line) + panic("%s: Failed to allocate %zu bytes\n", __func__, len + ilen); + ++ len = xlen + strlen(command_line) + 1; ++ + static_command_line = memblock_alloc(len, SMP_CACHE_BYTES); + if (!static_command_line) + panic("%s: Failed to allocate %zu bytes\n", __func__, len); diff --git a/queue-5.10/mei-me-disable-rpl-s-on-sps-and-ign-firmwares.patch b/queue-5.10/mei-me-disable-rpl-s-on-sps-and-ign-firmwares.patch new file mode 100644 index 0000000000..81086bb00a --- /dev/null +++ b/queue-5.10/mei-me-disable-rpl-s-on-sps-and-ign-firmwares.patch @@ -0,0 +1,34 @@ +From 0dc04112bee6fdd6eb847ccb32214703022c0269 Mon Sep 17 00:00:00 2001 +From: Alexander Usyskin <alexander.usyskin@intel.com> +Date: Tue, 12 Mar 2024 07:19:58 +0200 +Subject: mei: me: disable RPL-S on SPS and IGN firmwares + +From: Alexander Usyskin <alexander.usyskin@intel.com> + +commit 0dc04112bee6fdd6eb847ccb32214703022c0269 upstream. + +Extend the quirk to disable MEI interface on Intel PCH Ignition (IGN) +and SPS firmwares for RPL-S devices. These firmwares do not support +the MEI protocol. + +Fixes: 3ed8c7d39cfe ("mei: me: add raptor lake point S DID") +Cc: stable@vger.kernel.org +Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> +Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> +Link: https://lore.kernel.org/r/20240312051958.118478-1-tomas.winkler@intel.com +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/misc/mei/pci-me.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/misc/mei/pci-me.c ++++ b/drivers/misc/mei/pci-me.c +@@ -115,7 +115,7 @@ static const struct pci_device_id mei_me + {MEI_PCI_DEVICE(MEI_DEV_ID_ADP_P, MEI_ME_PCH15_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ADP_N, MEI_ME_PCH15_CFG)}, + +- {MEI_PCI_DEVICE(MEI_DEV_ID_RPL_S, MEI_ME_PCH15_CFG)}, ++ {MEI_PCI_DEVICE(MEI_DEV_ID_RPL_S, MEI_ME_PCH15_SPS_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_MTL_M, MEI_ME_PCH15_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ARL_S, MEI_ME_PCH15_CFG)}, diff --git a/queue-5.10/revert-usb-cdc-wdm-close-race-between-read-and-workqueue.patch b/queue-5.10/revert-usb-cdc-wdm-close-race-between-read-and-workqueue.patch new file mode 100644 index 0000000000..600e87cf7b --- /dev/null +++ b/queue-5.10/revert-usb-cdc-wdm-close-race-between-read-and-workqueue.patch @@ -0,0 +1,50 @@ +From 1607830dadeefc407e4956336d9fcd9e9defd810 Mon Sep 17 00:00:00 2001 +From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +Date: Thu, 18 Apr 2024 16:33:28 +0200 +Subject: Revert "usb: cdc-wdm: close race between read and workqueue" +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +commit 1607830dadeefc407e4956336d9fcd9e9defd810 upstream. + +This reverts commit 339f83612f3a569b194680768b22bf113c26a29d. + +It has been found to cause problems in a number of Chromebook devices, +so revert the change until it can be brought back in a safe way. + +Link: https://lore.kernel.org/r/385a3519-b45d-48c5-a6fd-a3fdb6bec92f@chromium.org +Reported-by:: Aleksander Morgado <aleksandermj@chromium.org> +Fixes: 339f83612f3a ("usb: cdc-wdm: close race between read and workqueue") +Cc: stable <stable@kernel.org> +Cc: Oliver Neukum <oneukum@suse.com> +Cc: Bjørn Mork <bjorn@mork.no> +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/usb/class/cdc-wdm.c | 6 +----- + 1 file changed, 1 insertion(+), 5 deletions(-) + +--- a/drivers/usb/class/cdc-wdm.c ++++ b/drivers/usb/class/cdc-wdm.c +@@ -471,7 +471,6 @@ out_free_mem: + static int service_outstanding_interrupt(struct wdm_device *desc) + { + int rv = 0; +- int used; + + /* submit read urb only if the device is waiting for it */ + if (!desc->resp_count || !--desc->resp_count) +@@ -486,10 +485,7 @@ static int service_outstanding_interrupt + goto out; + } + +- used = test_and_set_bit(WDM_RESPONDING, &desc->flags); +- if (used) +- goto out; +- ++ set_bit(WDM_RESPONDING, &desc->flags); + spin_unlock_irq(&desc->iuspin); + rv = usb_submit_urb(desc->response, GFP_KERNEL); + spin_lock_irq(&desc->iuspin); diff --git a/queue-5.10/serial-pmac_zilog-remove-flawed-mitigation-for-rx-irq-flood.patch b/queue-5.10/serial-pmac_zilog-remove-flawed-mitigation-for-rx-irq-flood.patch new file mode 100644 index 0000000000..510a3ada65 --- /dev/null +++ b/queue-5.10/serial-pmac_zilog-remove-flawed-mitigation-for-rx-irq-flood.patch @@ -0,0 +1,86 @@ +From 1be3226445362bfbf461c92a5bcdb1723f2e4907 Mon Sep 17 00:00:00 2001 +From: Finn Thain <fthain@linux-m68k.org> +Date: Mon, 8 Apr 2024 19:23:43 +1000 +Subject: serial/pmac_zilog: Remove flawed mitigation for rx irq flood + +From: Finn Thain <fthain@linux-m68k.org> + +commit 1be3226445362bfbf461c92a5bcdb1723f2e4907 upstream. + +The mitigation was intended to stop the irq completely. That may be +better than a hard lock-up but it turns out that you get a crash anyway +if you're using pmac_zilog as a serial console: + +ttyPZ0: pmz: rx irq flood ! +BUG: spinlock recursion on CPU#0, swapper/0 + +That's because the pr_err() call in pmz_receive_chars() results in +pmz_console_write() attempting to lock a spinlock already locked in +pmz_interrupt(). With CONFIG_DEBUG_SPINLOCK=y, this produces a fatal +BUG splat. The spinlock in question is the one in struct uart_port. + +Even when it's not fatal, the serial port rx function ceases to work. +Also, the iteration limit doesn't play nicely with QEMU, as can be +seen in the bug report linked below. + +A web search for other reports of the error message "pmz: rx irq flood" +didn't produce anything. So I don't think this code is needed any more. +Remove it. + +Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> +Cc: Michael Ellerman <mpe@ellerman.id.au> +Cc: Nicholas Piggin <npiggin@gmail.com> +Cc: Christophe Leroy <christophe.leroy@csgroup.eu> +Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> +Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> +Cc: Andy Shevchenko <andy.shevchenko@gmail.com> +Cc: stable@kernel.org +Cc: linux-m68k@lists.linux-m68k.org +Link: https://github.com/vivier/qemu-m68k/issues/44 +Link: https://lore.kernel.org/all/1078874617.9746.36.camel@gaston/ +Acked-by: Michael Ellerman <mpe@ellerman.id.au> +Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") +Cc: stable <stable@kernel.org> +Signed-off-by: Finn Thain <fthain@linux-m68k.org> +Link: https://lore.kernel.org/r/e853cf2c762f23101cd2ddec0cc0c2be0e72685f.1712568223.git.fthain@linux-m68k.org +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/tty/serial/pmac_zilog.c | 14 -------------- + 1 file changed, 14 deletions(-) + +--- a/drivers/tty/serial/pmac_zilog.c ++++ b/drivers/tty/serial/pmac_zilog.c +@@ -217,7 +217,6 @@ static bool pmz_receive_chars(struct uar + { + struct tty_port *port; + unsigned char ch, r1, drop, flag; +- int loops = 0; + + /* Sanity check, make sure the old bug is no longer happening */ + if (uap->port.state == NULL) { +@@ -298,25 +297,12 @@ static bool pmz_receive_chars(struct uar + if (r1 & Rx_OVR) + tty_insert_flip_char(port, 0, TTY_OVERRUN); + next_char: +- /* We can get stuck in an infinite loop getting char 0 when the +- * line is in a wrong HW state, we break that here. +- * When that happens, I disable the receive side of the driver. +- * Note that what I've been experiencing is a real irq loop where +- * I'm getting flooded regardless of the actual port speed. +- * Something strange is going on with the HW +- */ +- if ((++loops) > 1000) +- goto flood; + ch = read_zsreg(uap, R0); + if (!(ch & Rx_CH_AV)) + break; + } + + return true; +- flood: +- pmz_interrupt_control(uap, 0); +- pmz_error("pmz: rx irq flood !\n"); +- return true; + } + + static void pmz_status_handle(struct uart_pmac_port *uap) diff --git a/queue-5.10/series b/queue-5.10/series index d2ab176cbd..5a92b2f7d6 100644 --- a/queue-5.10/series +++ b/queue-5.10/series @@ -53,3 +53,17 @@ binder-check-offset-alignment-in-binder_get_object.patch thunderbolt-avoid-notify-pm-core-about-runtime-pm-resume.patch thunderbolt-fix-wake-configurations-after-device-unplug.patch comedi-vmk80xx-fix-incomplete-endpoint-checking.patch +serial-pmac_zilog-remove-flawed-mitigation-for-rx-irq-flood.patch +usb-serial-option-add-fibocom-fm135-gl-variants.patch +usb-serial-option-add-support-for-fibocom-fm650-fg650.patch +usb-serial-option-add-lonsung-u8300-u9300-product.patch +usb-serial-option-support-quectel-em060k-sub-models.patch +usb-serial-option-add-rolling-rw101-gl-and-rw135-gl-support.patch +usb-serial-option-add-telit-fn920c04-rmnet-compositions.patch +revert-usb-cdc-wdm-close-race-between-read-and-workqueue.patch +usb-dwc2-host-fix-dereference-issue-in-ddma-completion-flow.patch +usb-disable-usb3-lpm-at-shutdown.patch +mei-me-disable-rpl-s-on-sps-and-ign-firmwares.patch +speakup-avoid-crash-on-very-long-word.patch +fs-sysfs-fix-reference-leak-in-sysfs_break_active_protection.patch +init-main.c-fix-potential-static_command_line-memory-overflow.patch diff --git a/queue-5.10/speakup-avoid-crash-on-very-long-word.patch b/queue-5.10/speakup-avoid-crash-on-very-long-word.patch new file mode 100644 index 0000000000..ede78b8767 --- /dev/null +++ b/queue-5.10/speakup-avoid-crash-on-very-long-word.patch @@ -0,0 +1,32 @@ +From c8d2f34ea96ea3bce6ba2535f867f0d4ee3b22e1 Mon Sep 17 00:00:00 2001 +From: Samuel Thibault <samuel.thibault@ens-lyon.org> +Date: Sat, 23 Mar 2024 17:48:43 +0100 +Subject: speakup: Avoid crash on very long word + +From: Samuel Thibault <samuel.thibault@ens-lyon.org> + +commit c8d2f34ea96ea3bce6ba2535f867f0d4ee3b22e1 upstream. + +In case a console is set up really large and contains a really long word +(> 256 characters), we have to stop before the length of the word buffer. + +Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> +Fixes: c6e3fd22cd538 ("Staging: add speakup to the staging directory") +Cc: stable@vger.kernel.org +Link: https://lore.kernel.org/r/20240323164843.1426997-1-samuel.thibault@ens-lyon.org +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/accessibility/speakup/main.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/accessibility/speakup/main.c ++++ b/drivers/accessibility/speakup/main.c +@@ -576,7 +576,7 @@ static u_long get_word(struct vc_data *v + } + attr_ch = get_char(vc, (u_short *)tmp_pos, &spk_attr); + buf[cnt++] = attr_ch; +- while (tmpx < vc->vc_cols - 1) { ++ while (tmpx < vc->vc_cols - 1 && cnt < sizeof(buf) - 1) { + tmp_pos += 2; + tmpx++; + ch = get_char(vc, (u_short *)tmp_pos, &temp); diff --git a/queue-5.10/usb-disable-usb3-lpm-at-shutdown.patch b/queue-5.10/usb-disable-usb3-lpm-at-shutdown.patch new file mode 100644 index 0000000000..e0f667f00e --- /dev/null +++ b/queue-5.10/usb-disable-usb3-lpm-at-shutdown.patch @@ -0,0 +1,87 @@ +From d920a2ed8620be04a3301e1a9c2b7cc1de65f19d Mon Sep 17 00:00:00 2001 +From: Kai-Heng Feng <kai.heng.feng@canonical.com> +Date: Tue, 5 Mar 2024 14:51:38 +0800 +Subject: usb: Disable USB3 LPM at shutdown + +From: Kai-Heng Feng <kai.heng.feng@canonical.com> + +commit d920a2ed8620be04a3301e1a9c2b7cc1de65f19d upstream. + +SanDisks USB3 storage may disapper after system reboot: + +usb usb2-port3: link state change +xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0 +usb usb2-port3: do warm reset, port only +xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling +xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2b0, return 0x2b0 +usb usb2-port3: not warm reset yet, waiting 50ms +xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2f0, return 0x2f0 +usb usb2-port3: not warm reset yet, waiting 200ms +... +xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x6802c0, return 0x7002c0 +usb usb2-port3: not warm reset yet, waiting 200ms +xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x4802c0 +xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x4002c0 +xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0 +xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2c0, return 0x2c0 +usb usb2-port3: not enabled, trying warm reset again... + +This is due to the USB device still cause port change event after xHCI is +shuted down: + +xhci_hcd 0000:38:00.0: // Setting command ring address to 0xffffe001 +xhci_hcd 0000:38:00.0: xhci_resume: starting usb3 port polling. +xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb4 port polling +xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb3 port polling +xhci_hcd 0000:38:00.0: hcd_pci_runtime_resume: 0 +xhci_hcd 0000:38:00.0: xhci_shutdown: stopping usb3 port polling. +xhci_hcd 0000:38:00.0: // Halt the HC +xhci_hcd 0000:38:00.0: xhci_shutdown completed - status = 1 +xhci_hcd 0000:00:14.0: xhci_shutdown: stopping usb1 port polling. +xhci_hcd 0000:00:14.0: // Halt the HC +xhci_hcd 0000:00:14.0: xhci_shutdown completed - status = 1 +xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203 +xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status = 0x1311 +xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x201203, return 0x100203 +xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x1203 +xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x1203 +xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x1203 +xhci_hcd 0000:00:14.0: clear port3 connect change, portsc: 0x1203 +xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203 +usb 2-3: device not accepting address 2, error -108 +xhci_hcd 0000:00:14.0: xHCI dying or halted, can't queue_command +xhci_hcd 0000:00:14.0: Set port 2-3 link state, portsc: 0x1203, write 0x11261 +xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1263, return 0x263 +xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status = 0x1271 +xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12b1, return 0x2b1 +usb usb2-port3: not reset yet, waiting 60ms +ACPI: PM: Preparing to enter system sleep state S5 +xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12f1, return 0x2f1 +usb usb2-port3: not reset yet, waiting 200ms +reboot: Restarting system + +The port change event is caused by LPM transition, so disabling LPM at shutdown +to make sure the device is in U0 for warmboot. + +Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> +Cc: stable <stable@kernel.org> +Link: https://lore.kernel.org/r/20240305065140.66801-1-kai.heng.feng@canonical.com +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/usb/core/port.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/usb/core/port.c ++++ b/drivers/usb/core/port.c +@@ -295,8 +295,10 @@ static void usb_port_shutdown(struct dev + { + struct usb_port *port_dev = to_usb_port(dev); + +- if (port_dev->child) ++ if (port_dev->child) { + usb_disable_usb2_hardware_lpm(port_dev->child); ++ usb_unlocked_disable_lpm(port_dev->child); ++ } + } + + static const struct dev_pm_ops usb_port_pm_ops = { diff --git a/queue-5.10/usb-dwc2-host-fix-dereference-issue-in-ddma-completion-flow.patch b/queue-5.10/usb-dwc2-host-fix-dereference-issue-in-ddma-completion-flow.patch new file mode 100644 index 0000000000..e6dac0f8c6 --- /dev/null +++ b/queue-5.10/usb-dwc2-host-fix-dereference-issue-in-ddma-completion-flow.patch @@ -0,0 +1,41 @@ +From eed04fa96c48790c1cce73c8a248e9d460b088f8 Mon Sep 17 00:00:00 2001 +From: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> +Date: Tue, 9 Apr 2024 12:27:54 +0000 +Subject: usb: dwc2: host: Fix dereference issue in DDMA completion flow. + +From: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> + +commit eed04fa96c48790c1cce73c8a248e9d460b088f8 upstream. + +Fixed variable dereference issue in DDMA completion flow. + +Fixes: b258e4268850 ("usb: dwc2: host: Fix ISOC flow in DDMA mode") +CC: stable@vger.kernel.org +Reported-by: Dan Carpenter <dan.carpenter@linaro.org> +Closes: https://lore.kernel.org/linux-usb/2024040834-ethically-rumble-701f@gregkh/T/#m4c4b83bef0ebb4b67fe2e0a7d6466cbb6f416e39 +Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> +Link: https://lore.kernel.org/r/cc826d3ef53c934d8e6d98870f17f3cdc3d2755d.1712665387.git.Minas.Harutyunyan@synopsys.com +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/usb/dwc2/hcd_ddma.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/usb/dwc2/hcd_ddma.c ++++ b/drivers/usb/dwc2/hcd_ddma.c +@@ -897,13 +897,15 @@ static int dwc2_cmpl_host_isoc_dma_desc( + struct dwc2_dma_desc *dma_desc; + struct dwc2_hcd_iso_packet_desc *frame_desc; + u16 frame_desc_idx; +- struct urb *usb_urb = qtd->urb->priv; ++ struct urb *usb_urb; + u16 remain = 0; + int rc = 0; + + if (!qtd->urb) + return -EINVAL; + ++ usb_urb = qtd->urb->priv; ++ + dma_sync_single_for_cpu(hsotg->dev, qh->desc_list_dma + (idx * + sizeof(struct dwc2_dma_desc)), + sizeof(struct dwc2_dma_desc), diff --git a/queue-5.10/usb-serial-option-add-fibocom-fm135-gl-variants.patch b/queue-5.10/usb-serial-option-add-fibocom-fm135-gl-variants.patch new file mode 100644 index 0000000000..2408433f14 --- /dev/null +++ b/queue-5.10/usb-serial-option-add-fibocom-fm135-gl-variants.patch @@ -0,0 +1,62 @@ +From 356952b13af5b2c338df1e06889fd1b5e12cbbf4 Mon Sep 17 00:00:00 2001 +From: bolan wang <bolan.wang@fibocom.com> +Date: Wed, 6 Mar 2024 19:03:39 +0800 +Subject: USB: serial: option: add Fibocom FM135-GL variants + +From: bolan wang <bolan.wang@fibocom.com> + +commit 356952b13af5b2c338df1e06889fd1b5e12cbbf4 upstream. + +Update the USB serial option driver support for the Fibocom +FM135-GL LTE modules. +- VID:PID 2cb7:0115, FM135-GL for laptop debug M.2 cards(with MBIM +interface for /Linux/Chrome OS) + +0x0115: mbim, diag, at, pipe + +Here are the outputs of usb-devices: +T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 +D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 +P: Vendor=2cb7 ProdID=0115 Rev=05.15 +S: Manufacturer=Fibocom Wireless Inc. +S: Product=Fibocom Module +S: SerialNumber=12345678 +C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA +I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim +E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms +I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim +E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option +E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option +E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs +E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms + +Signed-off-by: bolan wang <bolan.wang@fibocom.com> +Cc: stable@vger.kernel.org +Signed-off-by: Johan Hovold <johan@kernel.org> +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/usb/serial/option.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/usb/serial/option.c ++++ b/drivers/usb/serial/option.c +@@ -2272,6 +2272,8 @@ static const struct usb_device_id option + { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0111, 0xff) }, /* Fibocom FM160 (MBIM mode) */ ++ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0115, 0xff), /* Fibocom FM135 (laptop MBIM) */ ++ .driver_info = RSVD(5) }, + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a3, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */ diff --git a/queue-5.10/usb-serial-option-add-lonsung-u8300-u9300-product.patch b/queue-5.10/usb-serial-option-add-lonsung-u8300-u9300-product.patch new file mode 100644 index 0000000000..4058517597 --- /dev/null +++ b/queue-5.10/usb-serial-option-add-lonsung-u8300-u9300-product.patch @@ -0,0 +1,114 @@ +From cf16ffa17c398434a77b8a373e69287c95b60de2 Mon Sep 17 00:00:00 2001 +From: Coia Prant <coiaprant@gmail.com> +Date: Mon, 15 Apr 2024 07:26:25 -0700 +Subject: USB: serial: option: add Lonsung U8300/U9300 product + +From: Coia Prant <coiaprant@gmail.com> + +commit cf16ffa17c398434a77b8a373e69287c95b60de2 upstream. + +Update the USB serial option driver to support Longsung U8300/U9300. + +For U8300 + +Interface 4 is used by for QMI interface in stock firmware of U8300, the +router which uses U8300 modem. +Interface 5 is used by for ADB interface in stock firmware of U8300, the +router which uses U8300 modem. + +Interface mapping is: +0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB + +T: Bus=05 Lev=01 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 +D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 +P: Vendor=1c9e ProdID=9b05 Rev=03.18 +S: Manufacturer=Android +S: Product=Android +C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA +I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option +E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan +E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms +I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) +E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms + +For U9300 + +Interface 1 is used by for ADB interface in stock firmware of U9300, the +router which uses U9300 modem. +Interface 4 is used by for QMI interface in stock firmware of U9300, the +router which uses U9300 modem. + +Interface mapping is: +0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI + +Note: Interface 3 of some models of the U9300 series can send AT commands. + +T: Bus=05 Lev=01 Prnt=05 Port=04 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 +D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 +P: Vendor=1c9e ProdID=9b3c Rev=03.18 +S: Manufacturer=Android +S: Product=Android +C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA +I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) +E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan +E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms + +Tested successfully using Modem Manager on U9300. +Tested successfully AT commands using If=1, If=2 and If=3 on U9300. + +Signed-off-by: Coia Prant <coiaprant@gmail.com> +Reviewed-by: Lars Melin <larsm17@gmail.com> +[ johan: drop product defines, trim commit message ] +Cc: stable@vger.kernel.org +Signed-off-by: Johan Hovold <johan@kernel.org> +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/usb/serial/option.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/usb/serial/option.c ++++ b/drivers/usb/serial/option.c +@@ -2052,6 +2052,10 @@ static const struct usb_device_id option + .driver_info = RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9803, 0xff), + .driver_info = RSVD(4) }, ++ { USB_DEVICE(LONGCHEER_VENDOR_ID, 0x9b05), /* Longsung U8300 */ ++ .driver_info = RSVD(4) | RSVD(5) }, ++ { USB_DEVICE(LONGCHEER_VENDOR_ID, 0x9b3c), /* Longsung U9300 */ ++ .driver_info = RSVD(0) | RSVD(4) }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) }, + { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, diff --git a/queue-5.10/usb-serial-option-add-rolling-rw101-gl-and-rw135-gl-support.patch b/queue-5.10/usb-serial-option-add-rolling-rw101-gl-and-rw135-gl-support.patch new file mode 100644 index 0000000000..75fbfe7ef3 --- /dev/null +++ b/queue-5.10/usb-serial-option-add-rolling-rw101-gl-and-rw135-gl-support.patch @@ -0,0 +1,175 @@ +From 311f97a4c7c22a01f8897bddf00428dfd0668e79 Mon Sep 17 00:00:00 2001 +From: Vanillan Wang <vanillanwang@163.com> +Date: Tue, 16 Apr 2024 18:02:55 +0800 +Subject: USB: serial: option: add Rolling RW101-GL and RW135-GL support + +From: Vanillan Wang <vanillanwang@163.com> + +commit 311f97a4c7c22a01f8897bddf00428dfd0668e79 upstream. + +Update the USB serial option driver support for the Rolling +LTE modules. + +- VID:PID 33f8:01a2, RW101-GL for laptop debug M.2 cards(with MBIM +interface for /Linux/Chrome OS) +0x01a2: mbim, diag, at, pipe +- VID:PID 33f8:01a3, RW101-GL for laptop debug M.2 cards(with MBIM +interface for /Linux/Chrome OS) +0x01a3: mbim, pipe +- VID:PID 33f8:01a4, RW101-GL for laptop debug M.2 cards(with MBIM +interface for /Linux/Chrome OS) +0x01a4: mbim, diag, at, pipe +- VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET +interface for /Linux/Chrome OS) +0x0104: RMNET, diag, at, pipe +- VID:PID 33f8:0115, RW135-GL for laptop debug M.2 cards(with MBIM +interface for /Linux/Chrome OS) +0x0115: MBIM, diag, at, pipe + +Here are the outputs of usb-devices: +T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 +D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 +P: Vendor=33f8 ProdID=01a2 Rev=05.15 +S: Manufacturer=Rolling Wireless S.a.r.l. +S: Product=Rolling Module +S: SerialNumber=12345678 +C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA +I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim +E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms +I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim +E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option +E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option +E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms + +T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 +D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 +P: Vendor=33f8 ProdID=01a3 Rev=05.15 +S: Manufacturer=Rolling Wireless S.a.r.l. +S: Product=Rolling Module +S: SerialNumber=12345678 +C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA +I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim +E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms +I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim +E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms + +T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 +D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 +P: Vendor=33f8 ProdID=01a4 Rev=05.15 +S: Manufacturer=Rolling Wireless S.a.r.l. +S: Product=Rolling Module +S: SerialNumber=12345678 +C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA +I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim +E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms +I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim +E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option +E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option +E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs +E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms + +T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 +D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 +P: Vendor=33f8 ProdID=0104 Rev=05.04 +S: Manufacturer=Rolling Wireless S.a.r.l. +S: Product=Rolling Module +S: SerialNumber=ba2eb033 +C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA +I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option +E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option +E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option +E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option +E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan +E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms +E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs +E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms + +T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 +D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 +P: Vendor=33f8 ProdID=0115 Rev=05.15 +S: Manufacturer=Rolling Wireless S.a.r.l. +S: Product=Rolling Module +S: SerialNumber=12345678 +C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA +I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim +E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms +I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim +E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option +E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option +E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs +E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms + +Signed-off-by: Vanillan Wang <vanillanwang@163.com> +Cc: stable@vger.kernel.org +Signed-off-by: Johan Hovold <johan@kernel.org> +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/usb/serial/option.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/drivers/usb/serial/option.c ++++ b/drivers/usb/serial/option.c +@@ -2307,6 +2307,14 @@ static const struct usb_device_id option + { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ + { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ + { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */ ++ { USB_DEVICE(0x33f8, 0x0104), /* Rolling RW101-GL (laptop RMNET) */ ++ .driver_info = RSVD(4) | RSVD(5) }, ++ { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a2, 0xff) }, /* Rolling RW101-GL (laptop MBIM) */ ++ { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a3, 0xff) }, /* Rolling RW101-GL (laptop MBIM) */ ++ { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a4, 0xff), /* Rolling RW101-GL (laptop MBIM) */ ++ .driver_info = RSVD(4) }, ++ { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0115, 0xff), /* Rolling RW135-GL (laptop MBIM) */ ++ .driver_info = RSVD(5) }, + { USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) }, diff --git a/queue-5.10/usb-serial-option-add-support-for-fibocom-fm650-fg650.patch b/queue-5.10/usb-serial-option-add-support-for-fibocom-fm650-fg650.patch new file mode 100644 index 0000000000..a395d0969d --- /dev/null +++ b/queue-5.10/usb-serial-option-add-support-for-fibocom-fm650-fg650.patch @@ -0,0 +1,139 @@ +From fb1f4584b1215e8c209f6b3a4028ed8351a0e961 Mon Sep 17 00:00:00 2001 +From: Chuanhong Guo <gch981213@gmail.com> +Date: Tue, 12 Mar 2024 14:29:12 +0800 +Subject: USB: serial: option: add support for Fibocom FM650/FG650 + +From: Chuanhong Guo <gch981213@gmail.com> + +commit fb1f4584b1215e8c209f6b3a4028ed8351a0e961 upstream. + +Fibocom FM650/FG650 are 5G modems with ECM/NCM/RNDIS/MBIM modes. +This patch adds support to all 4 modes. + +In all 4 modes, the first serial port is the AT console while the other +3 appear to be diagnostic interfaces for dumping modem logs. + +usb-devices output for all modes: + +ECM: +T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 +D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 +P: Vendor=2cb7 ProdID=0a04 Rev=04.04 +S: Manufacturer=Fibocom Wireless Inc. +S: Product=FG650 Module +S: SerialNumber=0123456789ABCDEF +C: #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=504mA +I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether +E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms +I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether +E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms + +NCM: +T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 +D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 +P: Vendor=2cb7 ProdID=0a05 Rev=04.04 +S: Manufacturer=Fibocom Wireless Inc. +S: Product=FG650 Module +S: SerialNumber=0123456789ABCDEF +C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA +I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm +E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms +I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm +E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms + +RNDIS: +T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 +D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 +P: Vendor=2cb7 ProdID=0a06 Rev=04.04 +S: Manufacturer=Fibocom Wireless Inc. +S: Product=FG650 Module +S: SerialNumber=0123456789ABCDEF +C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA +I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host +E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms +I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host +E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms + +MBIM: +T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 +D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 +P: Vendor=2cb7 ProdID=0a07 Rev=04.04 +S: Manufacturer=Fibocom Wireless Inc. +S: Product=FG650 Module +S: SerialNumber=0123456789ABCDEF +C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA +I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim +E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms +I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim +E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms +I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option +E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms +E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms + +Signed-off-by: Chuanhong Guo <gch981213@gmail.com> +Cc: stable@vger.kernel.org +Signed-off-by: Johan Hovold <johan@kernel.org> +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/usb/serial/option.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/usb/serial/option.c ++++ b/drivers/usb/serial/option.c +@@ -2279,6 +2279,10 @@ static const struct usb_device_id option + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a3, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff), /* Fibocom FM101-GL (laptop MBIM) */ + .driver_info = RSVD(4) }, ++ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a04, 0xff) }, /* Fibocom FM650-CN (ECM mode) */ ++ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a05, 0xff) }, /* Fibocom FM650-CN (NCM mode) */ ++ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a06, 0xff) }, /* Fibocom FM650-CN (RNDIS mode) */ ++ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a07, 0xff) }, /* Fibocom FM650-CN (MBIM mode) */ + { USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */ + { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ + { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ diff --git a/queue-5.10/usb-serial-option-add-telit-fn920c04-rmnet-compositions.patch b/queue-5.10/usb-serial-option-add-telit-fn920c04-rmnet-compositions.patch new file mode 100644 index 0000000000..2172320864 --- /dev/null +++ b/queue-5.10/usb-serial-option-add-telit-fn920c04-rmnet-compositions.patch @@ -0,0 +1,107 @@ +From 582ee2f9d268d302595db3e36b985e5cbb93284d Mon Sep 17 00:00:00 2001 +From: Daniele Palmas <dnlplm@gmail.com> +Date: Thu, 18 Apr 2024 13:34:30 +0200 +Subject: USB: serial: option: add Telit FN920C04 rmnet compositions + +From: Daniele Palmas <dnlplm@gmail.com> + +commit 582ee2f9d268d302595db3e36b985e5cbb93284d upstream. + +Add the following Telit FN920C04 compositions: + +0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) +T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 +D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 +P: Vendor=1bc7 ProdID=10a0 Rev=05.15 +S: Manufacturer=Telit Cinterion +S: Product=FN920 +S: SerialNumber=92c4c4d8 +C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA +I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan +E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms +I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option +E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option +E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option +E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms + +0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag) +T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 +D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 +P: Vendor=1bc7 ProdID=10a4 Rev=05.15 +S: Manufacturer=Telit Cinterion +S: Product=FN920 +S: SerialNumber=92c4c4d8 +C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA +I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan +E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms +I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option +E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option +E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option +E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms + +0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb +T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 +D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 +P: Vendor=1bc7 ProdID=10a9 Rev=05.15 +S: Manufacturer=Telit Cinterion +S: Product=FN920 +S: SerialNumber=92c4c4d8 +C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA +I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan +E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms +I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option +E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option +E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) +E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) +E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms + +Signed-off-by: Daniele Palmas <dnlplm@gmail.com> +Cc: stable@vger.kernel.org +Signed-off-by: Johan Hovold <johan@kernel.org> +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/usb/serial/option.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/drivers/usb/serial/option.c ++++ b/drivers/usb/serial/option.c +@@ -1376,6 +1376,12 @@ static const struct usb_device_id option + .driver_info = NCTRL(2) | RSVD(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff), /* Telit FE990 (ECM) */ + .driver_info = NCTRL(0) | RSVD(1) }, ++ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a0, 0xff), /* Telit FN20C04 (rmnet) */ ++ .driver_info = RSVD(0) | NCTRL(3) }, ++ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a4, 0xff), /* Telit FN20C04 (rmnet) */ ++ .driver_info = RSVD(0) | NCTRL(3) }, ++ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a9, 0xff), /* Telit FN20C04 (rmnet) */ ++ .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), + .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), diff --git a/queue-5.10/usb-serial-option-support-quectel-em060k-sub-models.patch b/queue-5.10/usb-serial-option-support-quectel-em060k-sub-models.patch new file mode 100644 index 0000000000..85c4823c5a --- /dev/null +++ b/queue-5.10/usb-serial-option-support-quectel-em060k-sub-models.patch @@ -0,0 +1,86 @@ +From c840244aba7ad2b83ed904378b36bd6aef25511c Mon Sep 17 00:00:00 2001 +From: Jerry Meng <jerry-meng@foxmail.com> +Date: Mon, 15 Apr 2024 15:04:29 +0800 +Subject: USB: serial: option: support Quectel EM060K sub-models + +From: Jerry Meng <jerry-meng@foxmail.com> + +commit c840244aba7ad2b83ed904378b36bd6aef25511c upstream. + +EM060K_129, EM060K_12a, EM060K_12b and EM0060K_12c are EM060K's sub-models, +having the same name "Quectel EM060K-GL" and the same interface layout. + +MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL + +T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 +D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 +P: Vendor=2c7c ProdID=0129 Rev= 5.04 +S: Manufacturer=Quectel +S: Product=Quectel EM060K-GL +S: SerialNumber=f6fa08b6 +C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA +A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 +I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim +E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms +I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim +I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim +E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) +E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms +I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option +E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option +E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option +E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms +E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) +E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) +E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms + +Signed-off-by: Jerry Meng <jerry-meng@foxmail.com> +Cc: stable@vger.kernel.org +Signed-off-by: Johan Hovold <johan@kernel.org> +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +--- + drivers/usb/serial/option.c | 16 ++++++++++++++++ + 1 file changed, 16 insertions(+) + +--- a/drivers/usb/serial/option.c ++++ b/drivers/usb/serial/option.c +@@ -255,6 +255,10 @@ static void option_instat_callback(struc + #define QUECTEL_PRODUCT_EM061K_LMS 0x0124 + #define QUECTEL_PRODUCT_EC25 0x0125 + #define QUECTEL_PRODUCT_EM060K_128 0x0128 ++#define QUECTEL_PRODUCT_EM060K_129 0x0129 ++#define QUECTEL_PRODUCT_EM060K_12a 0x012a ++#define QUECTEL_PRODUCT_EM060K_12b 0x012b ++#define QUECTEL_PRODUCT_EM060K_12c 0x012c + #define QUECTEL_PRODUCT_EG91 0x0191 + #define QUECTEL_PRODUCT_EG95 0x0195 + #define QUECTEL_PRODUCT_BG96 0x0296 +@@ -1218,6 +1222,18 @@ static const struct usb_device_id option + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x40) }, ++ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_129, 0xff, 0xff, 0x30) }, ++ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_129, 0xff, 0x00, 0x40) }, ++ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_129, 0xff, 0xff, 0x40) }, ++ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12a, 0xff, 0xff, 0x30) }, ++ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12a, 0xff, 0x00, 0x40) }, ++ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12a, 0xff, 0xff, 0x40) }, ++ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12b, 0xff, 0xff, 0x30) }, ++ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12b, 0xff, 0x00, 0x40) }, ++ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12b, 0xff, 0xff, 0x40) }, ++ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12c, 0xff, 0xff, 0x30) }, ++ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12c, 0xff, 0x00, 0x40) }, ++ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12c, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x40) }, |