diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-06-04 11:34:06 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-06-04 11:34:06 -0700 |
| commit | cfd12db4f12383506ca81fddd0f20921f166afd0 (patch) | |
| tree | f67810e15bd956ac05bf5c96209c1cd4562ebe68 | |
| parent | 910470e03f343c48500a5619bb14bb8df51c3a72 (diff) | |
| parent | 16c10b3bf84df5564683c704039f6199b8359b16 (diff) | |
| download | linux-security-cfd12db4f12383506ca81fddd0f20921f166afd0.tar.gz | |
Merge tag 'spi-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"Quite a busy release for SPI, mainly as a result of Boris Brezillon's
work on improving the integration with MTD for accelerated SPI flash
controllers. He's added a new spi_mem interface which works a lot
better with general hardware and converted the users over to it, as a
result of this work we've got some MTD changes in here as well.
Other highlights include:
- Lots of spring cleaning for the s3c64xx driver.
- Removal of the bcm53xx, the hardware is also supported by the mspi
driver but SoC naming had caused people to miss the duplication.
- Conversion of the pxa2xx driver to use the standard message
processing loop rather than open coding.
- A bunch of improvements to the runtime PM of the OMAP McSPI driver"
* tag 'spi-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (47 commits)
spi: Fix typo on SPI_MEM help text
spi: sh-msiof: Fix setting SIRMDR1.SYNCAC to match SITMDR1.SYNCAC
mtd: devices: m25p80: Use spi_mem_set_drvdata() instead of spi_set_drvdata()
spi: omap2-mcspi: Remove unnecessary pm_runtime_force_suspend()
spi: Add missing pm_runtime_put_noidle() after failed get
spi: ti-qspi: Make sure res_mmap != NULL before dereferencing it
spi: spi-s3c64xx: Fix system resume support
spi: bcm-qspi: Fix build failure caused by spi_flash_read() API removal
spi: Get rid of the spi_flash_read() API
mtd: spi-nor: Use the spi_mem_xx() API
spi: ti-qspi: Implement the spi_mem interface
spi: bcm-qspi: Implement the spi_mem interface
spi: Make support for regular transfers optional when ->mem_ops != NULL
spi: Extend the core to ease integration of SPI memory controllers
spi: remove forgotten CONFIG_SPI_BCM53XX
spi: remove the older/duplicated bcm53xx driver
spi: pxa2xx: check clk_prepare_enable() return value
spi: lpspi: Switch to SPDX identifier
spi: mxs: Switch to SPDX identifier
spi: imx: Switch to SPDX identifier
...
28 files changed, 1423 insertions, 1309 deletions
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 6def5445e03e18..57b02c4b3f63b7 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -81,6 +81,7 @@ config MTD_DATAFLASH_OTP config MTD_M25P80 tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)" depends on SPI_MASTER && MTD_SPI_NOR + select SPI_MEM help This enables access to most modern SPI flash chips, used for program and data storage. Series supported include Atmel AT26DF, diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index a4e18f6aaa338a..e84563d2067f4f 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -24,12 +24,13 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> +#include <linux/spi/spi-mem.h> #include <linux/spi/flash.h> #include <linux/mtd/spi-nor.h> #define MAX_CMD_SIZE 6 struct m25p { - struct spi_device *spi; + struct spi_mem *spimem; struct spi_nor spi_nor; u8 command[MAX_CMD_SIZE]; }; @@ -37,97 +38,68 @@ struct m25p { static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len) { struct m25p *flash = nor->priv; - struct spi_device *spi = flash->spi; + struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(code, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(len, val, 1)); int ret; - ret = spi_write_then_read(spi, &code, 1, val, len); + ret = spi_mem_exec_op(flash->spimem, &op); if (ret < 0) - dev_err(&spi->dev, "error %d reading %x\n", ret, code); + dev_err(&flash->spimem->spi->dev, "error %d reading %x\n", ret, + code); return ret; } -static void m25p_addr2cmd(struct spi_nor *nor, unsigned int addr, u8 *cmd) -{ - /* opcode is in cmd[0] */ - cmd[1] = addr >> (nor->addr_width * 8 - 8); - cmd[2] = addr >> (nor->addr_width * 8 - 16); - cmd[3] = addr >> (nor->addr_width * 8 - 24); - cmd[4] = addr >> (nor->addr_width * 8 - 32); -} - -static int m25p_cmdsz(struct spi_nor *nor) -{ - return 1 + nor->addr_width; -} - static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) { struct m25p *flash = nor->priv; - struct spi_device *spi = flash->spi; - - flash->command[0] = opcode; - if (buf) - memcpy(&flash->command[1], buf, len); + struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(len, buf, 1)); - return spi_write(spi, flash->command, len + 1); + return spi_mem_exec_op(flash->spimem, &op); } static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len, const u_char *buf) { struct m25p *flash = nor->priv; - struct spi_device *spi = flash->spi; - unsigned int inst_nbits, addr_nbits, data_nbits, data_idx; - struct spi_transfer t[3] = {}; - struct spi_message m; - int cmd_sz = m25p_cmdsz(nor); - ssize_t ret; + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, to, 1), + SPI_MEM_OP_DUMMY(0, 1), + SPI_MEM_OP_DATA_OUT(len, buf, 1)); + size_t remaining = len; + int ret; /* get transfer protocols. */ - inst_nbits = spi_nor_get_protocol_inst_nbits(nor->write_proto); - addr_nbits = spi_nor_get_protocol_addr_nbits(nor->write_proto); - data_nbits = spi_nor_get_protocol_data_nbits(nor->write_proto); - - spi_message_init(&m); + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto); + op.dummy.buswidth = op.addr.buswidth; + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto); if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second) - cmd_sz = 1; - - flash->command[0] = nor->program_opcode; - m25p_addr2cmd(nor, to, flash->command); + op.addr.nbytes = 0; - t[0].tx_buf = flash->command; - t[0].tx_nbits = inst_nbits; - t[0].len = cmd_sz; - spi_message_add_tail(&t[0], &m); - - /* split the op code and address bytes into two transfers if needed. */ - data_idx = 1; - if (addr_nbits != inst_nbits) { - t[0].len = 1; + while (remaining) { + op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX; + ret = spi_mem_adjust_op_size(flash->spimem, &op); + if (ret) + return ret; - t[1].tx_buf = &flash->command[1]; - t[1].tx_nbits = addr_nbits; - t[1].len = cmd_sz - 1; - spi_message_add_tail(&t[1], &m); + ret = spi_mem_exec_op(flash->spimem, &op); + if (ret) + return ret; - data_idx = 2; + op.addr.val += op.data.nbytes; + remaining -= op.data.nbytes; + op.data.buf.out += op.data.nbytes; } - t[data_idx].tx_buf = buf; - t[data_idx].tx_nbits = data_nbits; - t[data_idx].len = len; - spi_message_add_tail(&t[data_idx], &m); - - ret = spi_sync(spi, &m); - if (ret) - return ret; - - ret = m.actual_length - cmd_sz; - if (ret < 0) - return -EIO; - return ret; + return len; } /* @@ -138,92 +110,39 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, u_char *buf) { struct m25p *flash = nor->priv; - struct spi_device *spi = flash->spi; - unsigned int inst_nbits, addr_nbits, data_nbits, data_idx; - struct spi_transfer t[3]; - struct spi_message m; - unsigned int dummy = nor->read_dummy; - ssize_t ret; - int cmd_sz; + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, from, 1), + SPI_MEM_OP_DUMMY(nor->read_dummy, 1), + SPI_MEM_OP_DATA_IN(len, buf, 1)); + size_t remaining = len; + int ret; /* get transfer protocols. */ - inst_nbits = spi_nor_get_protocol_inst_nbits(nor->read_proto); - addr_nbits = spi_nor_get_protocol_addr_nbits(nor->read_proto); - data_nbits = spi_nor_get_protocol_data_nbits(nor->read_proto); + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto); + op.dummy.buswidth = op.addr.buswidth; + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto); /* convert the dummy cycles to the number of bytes */ - dummy = (dummy * addr_nbits) / 8; - - if (spi_flash_read_supported(spi)) { - struct spi_flash_read_message msg; - - memset(&msg, 0, sizeof(msg)); + op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8; - msg.buf = buf; - msg.from = from; - msg.len = len; - msg.read_opcode = nor->read_opcode; - msg.addr_width = nor->addr_width; - msg.dummy_bytes = dummy; - msg.opcode_nbits = inst_nbits; - msg.addr_nbits = addr_nbits; - msg.data_nbits = data_nbits; - - ret = spi_flash_read(spi, &msg); - if (ret < 0) + while (remaining) { + op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX; + ret = spi_mem_adjust_op_size(flash->spimem, &op); + if (ret) return ret; - return msg.retlen; - } - spi_message_init(&m); - memset(t, 0, (sizeof t)); - - flash->command[0] = nor->read_opcode; - m25p_addr2cmd(nor, from, flash->command); - - t[0].tx_buf = flash->command; - t[0].tx_nbits = inst_nbits; - t[0].len = m25p_cmdsz(nor) + dummy; - spi_message_add_tail(&t[0], &m); - - /* - * Set all dummy/mode cycle bits to avoid sending some manufacturer - * specific pattern, which might make the memory enter its Continuous - * Read mode by mistake. - * Based on the different mode cycle bit patterns listed and described - * in the JESD216B specification, the 0xff value works for all memories - * and all manufacturers. - */ - cmd_sz = t[0].len; - memset(flash->command + cmd_sz - dummy, 0xff, dummy); - - /* split the op code and address bytes into two transfers if needed. */ - data_idx = 1; - if (addr_nbits != inst_nbits) { - t[0].len = 1; - - t[1].tx_buf = &flash->command[1]; - t[1].tx_nbits = addr_nbits; - t[1].len = cmd_sz - 1; - spi_message_add_tail(&t[1], &m); + ret = spi_mem_exec_op(flash->spimem, &op); + if (ret) + return ret; - data_idx = 2; + op.addr.val += op.data.nbytes; + remaining -= op.data.nbytes; + op.data.buf.in += op.data.nbytes; } - t[data_idx].rx_buf = buf; - t[data_idx].rx_nbits = data_nbits; - t[data_idx].len = min3(len, spi_max_transfer_size(spi), - spi_max_message_size(spi) - cmd_sz); - spi_message_add_tail(&t[data_idx], &m); - - ret = spi_sync(spi, &m); - if (ret) - return ret; - - ret = m.actual_length - cmd_sz; - if (ret < 0) - return -EIO; - return ret; + return len; } /* @@ -231,8 +150,9 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, * matches what the READ command supports, at least until this driver * understands FAST_READ (for clocks over 25 MHz). */ -static int m25p_probe(struct spi_device *spi) +static int m25p_probe(struct spi_mem *spimem) { + struct spi_device *spi = spimem->spi; struct flash_platform_data *data; struct m25p *flash; struct spi_nor *nor; @@ -244,9 +164,9 @@ static int m25p_probe(struct spi_device *spi) char *flash_name; int ret; - data = dev_get_platdata(&spi->dev); + data = dev_get_platdata(&spimem->spi->dev); - flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL); + flash = devm_kzalloc(&spimem->spi->dev, sizeof(*flash), GFP_KERNEL); if (!flash) return -ENOMEM; @@ -258,12 +178,12 @@ static int m25p_probe(struct spi_device *spi) nor->write_reg = m25p80_write_reg; nor->read_reg = m25p80_read_reg; - nor->dev = &spi->dev; + nor->dev = &spimem->spi->dev; spi_nor_set_flash_node(nor, spi->dev.of_node); nor->priv = flash; - spi_set_drvdata(spi, flash); - flash->spi = spi; + spi_mem_set_drvdata(spimem, flash); + flash->spimem = spimem; if (spi->mode & SPI_RX_QUAD) { hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; @@ -303,9 +223,9 @@ static int m25p_probe(struct spi_device *spi) } -static int m25p_remove(struct spi_device *spi) +static int m25p_remove(struct spi_mem *spimem) { - struct m25p *flash = spi_get_drvdata(spi); + struct m25p *flash = spi_mem_get_drvdata(spimem); spi_nor_restore(&flash->spi_nor); @@ -313,9 +233,9 @@ static int m25p_remove(struct spi_device *spi) return mtd_device_unregister(&flash->spi_nor.mtd); } -static void m25p_shutdown(struct spi_device *spi) +static void m25p_shutdown(struct spi_mem *spimem) { - struct m25p *flash = spi_get_drvdata(spi); + struct m25p *flash = spi_mem_get_drvdata(spimem); spi_nor_restore(&flash->spi_nor); } @@ -386,12 +306,14 @@ static const struct of_device_id m25p_of_table[] = { }; MODULE_DEVICE_TABLE(of, m25p_of_table); -static struct spi_driver m25p80_driver = { - .driver = { - .name = "m25p80", - .of_match_table = m25p_of_table, +static struct spi_mem_driver m25p80_driver = { + .spidrv = { + .driver = { + .name = "m25p80", + .of_match_table = m25p_of_table, + }, + .id_table = m25p_ids, }, - .id_table = m25p_ids, .probe = m25p_probe, .remove = m25p_remove, .shutdown = m25p_shutdown, @@ -402,7 +324,7 @@ static struct spi_driver m25p80_driver = { */ }; -module_spi_driver(m25p80_driver); +module_spi_mem_driver(m25p80_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mike Lavender"); diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 2d4146ce2f1be4..ad5d68e1dab7cc 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -47,6 +47,13 @@ config SPI_MASTER if SPI_MASTER +config SPI_MEM + bool "SPI memory extension" + help + Enable this option if you want to enable the SPI memory extension. + This extension is meant to simplify interaction with SPI memories + by providing a high-level interface to send memory-like commands. + comment "SPI Master Controller Drivers" config SPI_ALTERA @@ -71,7 +78,6 @@ config SPI_ARMADA_3700 config SPI_ATMEL tristate "Atmel SPI Controller" - depends on HAS_DMA depends on ARCH_AT91 || COMPILE_TEST help This selects a driver for the Atmel SPI Controller, present on @@ -115,14 +121,6 @@ config SPI_BCM2835AUX "universal SPI master", and the regular SPI controller. This driver is for the universal/auxiliary SPI controller. -config SPI_BCM53XX - tristate "Broadcom BCM53xx SPI controller" - depends on ARCH_BCM_5301X - depends on BCMA_POSSIBLE - select BCMA - help - Enable support for the SPI controller on Broadcom BCM53xx ARM SoCs. - config SPI_BCM63XX tristate "Broadcom BCM63xx SPI controller" depends on BCM63XX || COMPILE_TEST @@ -233,7 +231,6 @@ config SPI_EFM32 config SPI_EP93XX tristate "Cirrus Logic EP93xx SPI controller" - depends on HAS_DMA depends on ARCH_EP93XX || COMPILE_TEST help This enables using the Cirrus EP93xx SPI controller in master @@ -355,7 +352,6 @@ config SPI_FSL_SPI config SPI_FSL_DSPI tristate "Freescale DSPI controller" select REGMAP_MMIO - depends on HAS_DMA depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || M5441x || COMPILE_TEST help This enables support for the Freescale DSPI controller in master @@ -431,7 +427,6 @@ config SPI_OMAP_UWIRE config SPI_OMAP24XX tristate "McSPI driver for OMAP" - depends on HAS_DMA depends on ARCH_OMAP2PLUS || COMPILE_TEST select SG_SPLIT help @@ -440,7 +435,6 @@ config SPI_OMAP24XX config SPI_TI_QSPI tristate "DRA7xxx QSPI controller support" - depends on HAS_DMA depends on ARCH_OMAP2PLUS || COMPILE_TEST help QSPI master controller for DRA7xxx used for flash devices. @@ -469,7 +463,6 @@ config SPI_PIC32 config SPI_PIC32_SQI tristate "Microchip PIC32 Quad SPI driver" depends on MACH_PIC32 || COMPILE_TEST - depends on HAS_DMA help SPI driver for PIC32 Quad SPI controller. @@ -572,7 +565,7 @@ config SPI_SC18IS602 config SPI_SH_MSIOF tristate "SuperH MSIOF SPI controller" - depends on HAVE_CLK && HAS_DMA + depends on HAVE_CLK depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST help SPI driver for SuperH and SH Mobile MSIOF blocks. @@ -650,7 +643,7 @@ config SPI_MXS config SPI_TEGRA114 tristate "NVIDIA Tegra114 SPI Controller" depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST - depends on RESET_CONTROLLER && HAS_DMA + depends on RESET_CONTROLLER help SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller is different than the older SoCs SPI controller and also register interface @@ -668,7 +661,7 @@ config SPI_TEGRA20_SFLASH config SPI_TEGRA20_SLINK tristate "Nvidia Tegra20/Tegra30 SLINK Controller" depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST - depends on RESET_CONTROLLER && HAS_DMA + depends on RESET_CONTROLLER help SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface. diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index b935f10eb9611c..cb1f4378b87c01 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -8,6 +8,7 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG # small core, mostly translating board-specific # config declarations into driver model code obj-$(CONFIG_SPI_MASTER) += spi.o +obj-$(CONFIG_SPI_MEM) += spi-mem.o obj-$(CONFIG_SPI_SPIDEV) += spidev.o obj-$(CONFIG_SPI_LOOPBACK_TEST) += spi-loopback-test.o @@ -20,7 +21,6 @@ obj-$(CONFIG_SPI_AU1550) += spi-au1550.o obj-$(CONFIG_SPI_AXI_SPI_ENGINE) += spi-axi-spi-engine.o obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o obj-$(CONFIG_SPI_BCM2835AUX) += spi-bcm2835aux.o -obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o obj-$(CONFIG_SPI_BCM_QSPI) += spi-iproc-qspi.o spi-brcmstb-qspi.o spi-bcm-qspi.o diff --git a/drivers/spi/internals.h b/drivers/spi/internals.h new file mode 100644 index 00000000000000..4a28a8395552d2 --- /dev/null +++ b/drivers/spi/internals.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Exceet Electronics GmbH + * Copyright (C) 2018 Bootlin + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + * + * Helpers needed by the spi or spi-mem logic. Should not be used outside of + * spi-mem.c and spi.c. + */ + +#ifndef __LINUX_SPI_INTERNALS_H +#define __LINUX_SPI_INTERNALS_H + +#include <linux/device.h> +#include <linux/dma-direction.h> +#include <linux/scatterlist.h> +#include <linux/spi/spi.h> + +void spi_flush_queue(struct spi_controller *ctrl); + +#ifdef CONFIG_HAS_DMA +int spi_map_buf(struct spi_controller *ctlr, struct device *dev, + struct sg_table *sgt, void *buf, size_t len, + enum dma_data_direction dir); +void spi_unmap_buf(struct spi_controller *ctlr, struct device *dev, + struct sg_table *sgt, enum dma_data_direction dir); +#else /* !CONFIG_HAS_DMA */ +static inline int spi_map_buf(struct spi_controller *ctlr, struct device *dev, + struct sg_table *sgt, void *buf, size_t len, + enum dma_data_direction dir) +{ + return -EINVAL; +} + +static inline void spi_unmap_buf(struct spi_controller *ctlr, + struct device *dev, struct sg_table *sgt, + enum dma_data_direction dir) +{ +} +#endif /* CONFIG_HAS_DMA */ + +#endif /* __LINUX_SPI_INTERNALS_H */ diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c index 6573152ce8936e..8612525fa4e34e 100644 --- a/drivers/spi/spi-bcm-qspi.c +++ b/drivers/spi/spi-bcm-qspi.c @@ -30,6 +30,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/spi/spi.h> +#include <linux/spi/spi-mem.h> #include <linux/sysfs.h> #include <linux/types.h> #include "spi-bcm-qspi.h" @@ -215,10 +216,10 @@ struct bcm_qspi { int bspi_maj_rev; int bspi_min_rev; int bspi_enabled; - struct spi_flash_read_message *bspi_rf_msg; - u32 bspi_rf_msg_idx; - u32 bspi_rf_msg_len; - u32 bspi_rf_msg_status; + const struct spi_mem_op *bspi_rf_op; + u32 bspi_rf_op_idx; + u32 bspi_rf_op_len; + u32 bspi_rf_op_status; struct bcm_xfer_mode xfer_mode; u32 s3_strap_override_ctrl; bool bspi_mode; @@ -313,26 +314,26 @@ static inline void bcm_qspi_bspi_lr_clear(struct bcm_qspi *qspi) static void bcm_qspi_bspi_lr_data_read(struct bcm_qspi *qspi) { - u32 *buf = (u32 *)qspi->bspi_rf_msg->buf; + u32 *buf = (u32 *)qspi->bspi_rf_op->data.buf.in; u32 data = 0; - dev_dbg(&qspi->pdev->dev, "xfer %p rx %p rxlen %d\n", qspi->bspi_rf_msg, - qspi->bspi_rf_msg->buf, qspi->bspi_rf_msg_len); + dev_dbg(&qspi->pdev->dev, "xfer %p rx %p rxlen %d\n", qspi->bspi_rf_op, + qspi->bspi_rf_op->data.buf.in, qspi->bspi_rf_op_len); while (!bcm_qspi_bspi_lr_is_fifo_empty(qspi)) { data = bcm_qspi_bspi_lr_read_fifo(qspi); - if (likely(qspi->bspi_rf_msg_len >= 4) && + if (likely(qspi->bspi_rf_op_len >= 4) && IS_ALIGNED((uintptr_t)buf, 4)) { - buf[qspi->bspi_rf_msg_idx++] = data; - qspi->bspi_rf_msg_len -= 4; + buf[qspi->bspi_rf_op_idx++] = data; + qspi->bspi_rf_op_len -= 4; } else { /* Read out remaining bytes, make sure*/ - u8 *cbuf = (u8 *)&buf[qspi->bspi_rf_msg_idx]; + u8 *cbuf = (u8 *)&buf[qspi->bspi_rf_op_idx]; data = cpu_to_le32(data); - while (qspi->bspi_rf_msg_len) { + while (qspi->bspi_rf_op_len) { *cbuf++ = (u8)data; data >>= 8; - qspi->bspi_rf_msg_len--; + qspi->bspi_rf_op_len--; } } } @@ -349,14 +350,12 @@ static void bcm_qspi_bspi_set_xfer_params(struct bcm_qspi *qspi, u8 cmd_byte, } static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, - struct spi_flash_read_message *msg, - int hp) + const struct spi_mem_op *op, int hp) { int bpc = 0, bpp = 0; - u8 command = msg->read_opcode; - int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE; - int addrlen = msg->addr_width; - int addr_nbits = msg->addr_nbits ? msg->addr_nbits : SPI_NBITS_SINGLE; + u8 command = op->cmd.opcode; + int width = op->cmd.buswidth ? op->cmd.buswidth : SPI_NBITS_SINGLE; + int addrlen = op->addr.nbytes * 8; int flex_mode = 1; dev_dbg(&qspi->pdev->dev, "set flex mode w %x addrlen %x hp %d\n", @@ -365,7 +364,7 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, if (addrlen == BSPI_ADDRLEN_4BYTES) bpp = BSPI_BPP_ADDR_SELECT_MASK; - bpp |= msg->dummy_bytes * (8/addr_nbits); + bpp |= (op->dummy.nbytes * 8) / op->dummy.buswidth; switch (width) { case SPI_NBITS_SINGLE: @@ -397,11 +396,10 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, } static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, - struct spi_flash_read_message *msg, - int hp) + const struct spi_mem_op *op, int hp) { - int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE; - int addrlen = msg->addr_width; + int width = op->data.buswidth ? op->data.buswidth : SPI_NBITS_SINGLE; + int addrlen = op->addr.nbytes; u32 data = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL); dev_dbg(&qspi->pdev->dev, "set override mode w %x addrlen %x hp %d\n", @@ -437,17 +435,17 @@ static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, /* set the override mode */ data |= BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE; bcm_qspi_write(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL, data); - bcm_qspi_bspi_set_xfer_params(qspi, msg->read_opcode, 0, 0, 0); + bcm_qspi_bspi_set_xfer_params(qspi, op->cmd.opcode, 0, 0, 0); return 0; } static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi, - struct spi_flash_read_message *msg, int hp) + const struct spi_mem_op *op, int hp) { int error = 0; - int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE; - int addrlen = msg->addr_width; + int width = op->data.buswidth ? op->data.buswidth : SPI_NBITS_SINGLE; + int addrlen = op->addr.nbytes; /* default mode */ qspi->xfer_mode.flex_mode = true; @@ -460,12 +458,12 @@ static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi, if (val & mask || qspi->s3_strap_override_ctrl & mask) { qspi->xfer_mode.flex_mode = false; bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, 0); - error = bcm_qspi_bspi_set_override(qspi, msg, hp); + error = bcm_qspi_bspi_set_override(qspi, op, hp); } } if (qspi->xfer_mode.flex_mode) - error = bcm_qspi_bspi_set_flex_mode(qspi, msg, hp); + error = bcm_qspi_bspi_set_flex_mode(qspi, op, hp); if (error) { dev_warn(&qspi->pdev->dev, @@ -802,19 +800,20 @@ done: return slot; } -static int bcm_qspi_bspi_flash_read(struct spi_device *spi, - struct spi_flash_read_message *msg) +static int bcm_qspi_bspi_exec_mem_op(struct spi_device *spi, + const struct spi_mem_op *op) { struct bcm_qspi *qspi = spi_master_get_devdata(spi->master); - u32 addr = 0, len, rdlen, len_words; + u32 addr = 0, len, rdlen, len_words, from = 0; int ret = 0; unsigned long timeo = msecs_to_jiffies(100); struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc; if (bcm_qspi_bspi_ver_three(qspi)) - if (msg->addr_width == BSPI_ADDRLEN_4BYTES) + if (op->addr.nbytes == BSPI_ADDRLEN_4BYTES) return -EIO; + from = op->addr.val; bcm_qspi_chip_select(qspi, spi->chip_select); bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0); @@ -823,15 +822,15 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi, * the upper address byte to bspi */ if (bcm_qspi_bspi_ver_three(qspi) == false) { - addr = msg->from & 0xff000000; + addr = from & 0xff000000; bcm_qspi_write(qspi, BSPI, BSPI_BSPI_FLASH_UPPER_ADDR_BYTE, addr); } if (!qspi->xfer_mode.flex_mode) - addr = msg->from; + addr = from; else - addr = msg->from & 0x00ffffff; + addr = from & 0x00ffffff; if (bcm_qspi_bspi_ver_three(qspi) == true) addr = (addr + 0xc00000) & 0xffffff; @@ -840,8 +839,8 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi, * read into the entire buffer by breaking the reads * into RAF buffer read lengths */ - len = msg->len; - qspi->bspi_rf_msg_idx = 0; + len = op->data.nbytes; + qspi->bspi_rf_op_idx = 0; do { if (len > BSPI_READ_LENGTH) @@ -852,9 +851,9 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi, reinit_completion(&qspi->bspi_done); bcm_qspi_enable_bspi(qspi); len_words = (rdlen + 3) >> 2; - qspi->bspi_rf_msg = msg; - qspi->bspi_rf_msg_status = 0; - qspi->bspi_rf_msg_len = rdlen; + qspi->bspi_rf_op = op; + qspi->bspi_rf_op_status = 0; + qspi->bspi_rf_op_len = rdlen; dev_dbg(&qspi->pdev->dev, "bspi xfr addr 0x%x len 0x%x", addr, rdlen); bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr); @@ -879,7 +878,6 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi, } /* set msg return length */ - msg->retlen += rdlen; addr += rdlen; len -= rdlen; } while (len); @@ -914,61 +912,63 @@ static int bcm_qspi_transfer_one(struct spi_master *master, return 0; } -static int bcm_qspi_mspi_flash_read(struct spi_device *spi, - struct spi_flash_read_message *msg) +static int bcm_qspi_mspi_exec_mem_op(struct spi_device *spi, + const struct spi_mem_op *op) { - struct bcm_qspi *qspi = spi_master_get_devdata(spi->master); + struct spi_master *master = spi->master; + struct bcm_qspi *qspi = spi_master_get_devdata(master); struct spi_transfer t[2]; - u8 cmd[6]; - int ret; + u8 cmd[6] = { }; + int ret, i; memset(cmd, 0, sizeof(cmd)); memset(t, 0, sizeof(t)); /* tx */ /* opcode is in cmd[0] */ - cmd[0] = msg->read_opcode; - cmd[1] = msg->from >> (msg->addr_width * 8 - 8); - cmd[2] = msg->from >> (msg->addr_width * 8 - 16); - cmd[3] = msg->from >> (msg->addr_width * 8 - 24); - cmd[4] = msg->from >> (msg->addr_width * 8 - 32); + cmd[0] = op->cmd.opcode; + for (i = 0; i < op->addr.nbytes; i++) + cmd[1 + i] = op->addr.val >> (8 * (op->addr.nbytes - i - 1)); + t[0].tx_buf = cmd; - t[0].len = msg->addr_width + msg->dummy_bytes + 1; + t[0].len = op->addr.nbytes + op->dummy.nbytes + 1; t[0].bits_per_word = spi->bits_per_word; - t[0].tx_nbits = msg->opcode_nbits; + t[0].tx_nbits = op->cmd.buswidth; /* lets mspi know that this is not last transfer */ qspi->trans_pos.mspi_last_trans = false; - ret = bcm_qspi_transfer_one(spi->master, spi, &t[0]); + ret = bcm_qspi_transfer_one(master, spi, &t[0]); /* rx */ qspi->trans_pos.mspi_last_trans = true; if (!ret) { /* rx */ - t[1].rx_buf = msg->buf; - t[1].len = msg->len; - t[1].rx_nbits = msg->data_nbits; + t[1].rx_buf = op->data.buf.in; + t[1].len = op->data.nbytes; + t[1].rx_nbits = op->data.buswidth; t[1].bits_per_word = spi->bits_per_word; - ret = bcm_qspi_transfer_one(spi->master, spi, &t[1]); + ret = bcm_qspi_transfer_one(master, spi, &t[1]); } - if (!ret) - msg->retlen = msg->len; - return ret; } -static int bcm_qspi_flash_read(struct spi_device *spi, - struct spi_flash_read_message *msg) +static int bcm_qspi_exec_mem_op(struct spi_mem *mem, + const struct spi_mem_op *op) { + struct spi_device *spi = mem->spi; struct bcm_qspi *qspi = spi_master_get_devdata(spi->master); int ret = 0; bool mspi_read = false; - u32 addr, len; + u32 addr = 0, len; u_char *buf; - buf = msg->buf; - addr = msg->from; - len = msg->len; + if (!op->data.nbytes || !op->addr.nbytes || op->addr.nbytes > 4 || + op->data.dir != SPI_MEM_DATA_IN) + return -ENOTSUPP; + + buf = op->data.buf.in; + addr = op->addr.val; + len = op->data.nbytes; if (bcm_qspi_bspi_ver_three(qspi) == true) { /* @@ -990,12 +990,12 @@ static int bcm_qspi_flash_read(struct spi_device *spi, mspi_read = true; if (mspi_read) - return bcm_qspi_mspi_flash_read(spi, msg); + return bcm_qspi_mspi_exec_mem_op(spi, op); - ret = bcm_qspi_bspi_set_mode(qspi, msg, -1); + ret = bcm_qspi_bspi_set_mode(qspi, op, -1); if (!ret) - ret = bcm_qspi_bspi_flash_read(spi, msg); + ret = bcm_qspi_bspi_exec_mem_op(spi, op); return ret; } @@ -1034,10 +1034,10 @@ static irqreturn_t bcm_qspi_bspi_lr_l2_isr(int irq, void *dev_id) struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc; u32 status = qspi_dev_id->irqp->mask; - if (qspi->bspi_enabled && qspi->bspi_rf_msg) { + if (qspi->bspi_enabled && qspi->bspi_rf_op) { bcm_qspi_bspi_lr_data_read(qspi); - if (qspi->bspi_rf_msg_len == 0) { - qspi->bspi_rf_msg = NULL; + if (qspi->bspi_rf_op_len == 0) { + qspi->bspi_rf_op = NULL; if (qspi->soc_intc) { /* disable soc BSPI interrupt */ soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, @@ -1046,7 +1046,7 @@ static irqreturn_t bcm_qspi_bspi_lr_l2_isr(int irq, void *dev_id) status = INTR_BSPI_LR_SESSION_DONE_MASK; } - if (qspi->bspi_rf_msg_status) + if (qspi->bspi_rf_op_status) bcm_qspi_bspi_lr_clear(qspi); else bcm_qspi_bspi_flush_prefetch_buffers(qspi); @@ -1058,7 +1058,7 @@ static irqreturn_t bcm_qspi_bspi_lr_l2_isr(int irq, void *dev_id) } status &= INTR_BSPI_LR_SESSION_DONE_MASK; - if (qspi->bspi_enabled && status && qspi->bspi_rf_msg_len == 0) + if (qspi->bspi_enabled && status && qspi->bspi_rf_op_len == 0) complete(&qspi->bspi_done); return IRQ_HANDLED; @@ -1071,7 +1071,7 @@ static irqreturn_t bcm_qspi_bspi_lr_err_l2_isr(int irq, void *dev_id) struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc; dev_err(&qspi->pdev->dev, "BSPI INT error\n"); - qspi->bspi_rf_msg_status = -EIO; + qspi->bspi_rf_op_status = -EIO; if (qspi->soc_intc) /* clear soc interrupt */ soc_intc->bcm_qspi_int_ack(soc_intc, BSPI_ERR); @@ -1194,6 +1194,10 @@ static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi) } +static const struct spi_controller_mem_ops bcm_qspi_mem_ops = { + .exec_op = bcm_qspi_exec_mem_op, +}; + static const struct of_device_id bcm_qspi_of_match[] = { { .compatible = "brcm,spi-bcm-qspi" }, {}, @@ -1236,7 +1240,7 @@ int bcm_qspi_probe(struct platform_device *pdev, master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_RX_DUAL | SPI_RX_QUAD; master->setup = bcm_qspi_setup; master->transfer_one = bcm_qspi_transfer_one; - master->spi_flash_read = bcm_qspi_flash_read; + master->mem_ops = &bcm_qspi_mem_ops; master->cleanup = bcm_qspi_cleanup; master->dev.of_node = dev->of_node; master->num_chipselect = NUM_CHIPSELECT; diff --git a/drivers/spi/spi-bcm53xx.c b/drivers/spi/spi-bcm53xx.c deleted file mode 100644 index d02ceb7a29d155..00000000000000 --- a/drivers/spi/spi-bcm53xx.c +++ /dev/null @@ -1,360 +0,0 @@ -/* - * Copyright (C) 2014-2016 Rafał Miłecki <rafal@milecki.pl> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/bcma/bcma.h> -#include <linux/spi/spi.h> - -#include "spi-bcm53xx.h" - -#define BCM53XXSPI_MAX_SPI_BAUD 13500000 /* 216 MHz? */ -#define BCM53XXSPI_FLASH_WINDOW SZ_32M - -/* The longest observed required wait was 19 ms */ -#define BCM53XXSPI_SPE_TIMEOUT_MS 80 - -struct bcm53xxspi { - struct bcma_device *core; - struct spi_master *master; - void __iomem *mmio_base; - bool bspi; /* Boot SPI mode with memory mapping */ -}; - -static inline u32 bcm53xxspi_read(struct bcm53xxspi *b53spi, u16 offset) -{ - return bcma_read32(b53spi->core, offset); -} - -static inline void bcm53xxspi_write(struct bcm53xxspi *b53spi, u16 offset, - u32 value) -{ - bcma_write32(b53spi->core, offset, value); -} - -static void bcm53xxspi_disable_bspi(struct bcm53xxspi *b53spi) -{ - struct device *dev = &b53spi->core->dev; - unsigned long deadline; - u32 tmp; - - if (!b53spi->bspi) - return; - - tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL); - if (tmp & 0x1) - return; - - deadline = jiffies + usecs_to_jiffies(200); - do { - tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_BUSY_STATUS); - if (!(tmp & 0x1)) { - bcm53xxspi_write(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL, - 0x1); - ndelay(200); - b53spi->bspi = false; - return; - } - udelay(1); - } while (!time_after_eq(jiffies, deadline)); - - dev_warn(dev, "Timeout disabling BSPI\n"); -} - -static void bcm53xxspi_enable_bspi(struct bcm53xxspi *b53spi) -{ - u32 tmp; - - if (b53spi->bspi) - return; - - tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL); - if (!(tmp & 0x1)) - return; - - bcm53xxspi_write(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL, 0x0); - b53spi->bspi = true; -} - -static inline unsigned int bcm53xxspi_calc_timeout(size_t len) -{ - /* Do some magic calculation based on length and buad. Add 10% and 1. */ - return (len * 9000 / BCM53XXSPI_MAX_SPI_BAUD * 110 / 100) + 1; -} - -static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms) -{ - unsigned long deadline; - u32 tmp; - - /* SPE bit has to be 0 before we read MSPI STATUS */ - deadline = jiffies + msecs_to_jiffies(BCM53XXSPI_SPE_TIMEOUT_MS); - do { - tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2); - if (!(tmp & B53SPI_MSPI_SPCR2_SPE)) - break; - udelay(5); - } while (!time_after_eq(jiffies, deadline)); - - if (tmp & B53SPI_MSPI_SPCR2_SPE) - goto spi_timeout; - - /* Check status */ - deadline = jiffies + msecs_to_jiffies(timeout_ms); - do { - tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS); - if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) { - bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0); - return 0; - } - - cpu_relax(); - udelay(100); - } while (!time_after_eq(jiffies, deadline)); - -spi_timeout: - bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0); - - pr_err("Timeout waiting for SPI to be ready!\n"); - - return -EBUSY; -} - -static void bcm53xxspi_buf_write(struct bcm53xxspi *b53spi, u8 *w_buf, - size_t len, bool cont) -{ - u32 tmp; - int i; - - for (i = 0; i < len; i++) { - /* Transmit Register File MSB */ - bcm53xxspi_write(b53spi, B53SPI_MSPI_TXRAM + 4 * (i * 2), - (unsigned int)w_buf[i]); - } - - for (i = 0; i < len; i++) { - tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL | - B53SPI_CDRAM_PCS_DSCK; - if (!cont && i == len - 1) - tmp &= ~B53SPI_CDRAM_CONT; - tmp &= ~0x1; - /* Command Register File */ - bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp); - } - - /* Set queue pointers */ - bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0); - bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1); - - if (cont) - bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1); - - /* Start SPI transfer */ - tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2); - tmp |= B53SPI_MSPI_SPCR2_SPE; - if (cont) - tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD; - bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp); - - /* Wait for SPI to finish */ - bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len)); - - if (!cont) - bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0); -} - -static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf, - size_t len, bool cont) -{ - u32 tmp; - int i; - - for (i = 0; i < len; i++) { - tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL | - B53SPI_CDRAM_PCS_DSCK; - if (!cont && i == len - 1) - tmp &= ~B53SPI_CDRAM_CONT; - tmp &= ~0x1; - /* Command Register File */ - bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp); - } - - /* Set queue pointers */ - bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0); - bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1); - - if (cont) - bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1); - - /* Start SPI transfer */ - tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2); - tmp |= B53SPI_MSPI_SPCR2_SPE; - if (cont) - tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD; - bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp); - - /* Wait for SPI to finish */ - bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len)); - - if (!cont) - bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0); - - for (i = 0; i < len; ++i) { - u16 reg = B53SPI_MSPI_RXRAM + 4 * (1 + i * 2); - - /* Data stored in the transmit register file LSB */ - r_buf[i] = (u8)bcm53xxspi_read(b53spi, reg); - } -} - -static int bcm53xxspi_transfer_one(struct spi_master *master, - struct spi_device *spi, - struct spi_transfer *t) -{ - struct bcm53xxspi *b53spi = spi_master_get_devdata(master); - u8 *buf; - size_t left; - - bcm53xxspi_disable_bspi(b53spi); - - if (t->tx_buf) { - buf = (u8 *)t->tx_buf; - left = t->len; - while (left) { - size_t to_write = min_t(size_t, 16, left); - bool cont = !spi_transfer_is_last(master, t) || - left - to_write > 0; - - bcm53xxspi_buf_write(b53spi, buf, to_write, cont); - left -= to_write; - buf += to_write; - } - } - - if (t->rx_buf) { - buf = (u8 *)t->rx_buf; - left = t->len; - while (left) { - size_t to_read = min_t(size_t, 16, left); - bool cont = !spi_transfer_is_last(master, t) || - left - to_read > 0; - - bcm53xxspi_buf_read(b53spi, buf, to_read, cont); - left -= to_read; - buf += to_read; - } - } - - return 0; -} - -static int bcm53xxspi_flash_read(struct spi_device *spi, - struct spi_flash_read_message *msg) -{ - struct bcm53xxspi *b53spi = spi_master_get_devdata(spi->master); - int ret = 0; - - if (msg->from + msg->len > BCM53XXSPI_FLASH_WINDOW) - return -EINVAL; - - bcm53xxspi_enable_bspi(b53spi); - memcpy_fromio(msg->buf, b53spi->mmio_base + msg->from, msg->len); - msg->retlen = msg->len; - - return ret; -} - -/************************************************** - * BCMA - **************************************************/ - -static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = { - BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS), - {}, -}; -MODULE_DEVICE_TABLE(bcma, bcm53xxspi_bcma_tbl); - -static int bcm53xxspi_bcma_probe(struct bcma_device *core) -{ - struct device *dev = &core->dev; - struct bcm53xxspi *b53spi; - struct spi_master *master; - int err; - - if (core->bus->drv_cc.core->id.rev != 42) { - pr_err("SPI on SoC with unsupported ChipCommon rev\n"); - return -ENOTSUPP; - } - - master = spi_alloc_master(dev, sizeof(*b53spi)); - if (!master) - return -ENOMEM; - - b53spi = spi_master_get_devdata(master); - b53spi->master = master; - b53spi->core = core; - - if (core->addr_s[0]) - b53spi->mmio_base = devm_ioremap(dev, core->addr_s[0], - BCM53XXSPI_FLASH_WINDOW); - b53spi->bspi = true; - bcm53xxspi_disable_bspi(b53spi); - - master->dev.of_node = dev->of_node; - master->transfer_one = bcm53xxspi_transfer_one; - if (b53spi->mmio_base) - master->spi_flash_read = bcm53xxspi_flash_read; - - bcma_set_drvdata(core, b53spi); - - err = devm_spi_register_master(dev, master); - if (err) { - spi_master_put(master); - bcma_set_drvdata(core, NULL); - return err; - } - - return 0; -} - -static struct bcma_driver bcm53xxspi_bcma_driver = { - .name = KBUILD_MODNAME, - .id_table = bcm53xxspi_bcma_tbl, - .probe = bcm53xxspi_bcma_probe, -}; - -/************************************************** - * Init & exit - **************************************************/ - -static int __init bcm53xxspi_module_init(void) -{ - int err = 0; - - err = bcma_driver_register(&bcm53xxspi_bcma_driver); - if (err) - pr_err("Failed to register bcma driver: %d\n", err); - - return err; -} - -static void __exit bcm53xxspi_module_exit(void) -{ - bcma_driver_unregister(&bcm53xxspi_bcma_driver); -} - -module_init(bcm53xxspi_module_init); -module_exit(bcm53xxspi_module_exit); - -MODULE_DESCRIPTION("Broadcom BCM53xx SPI Controller driver"); -MODULE_AUTHOR("Rafał Miłecki <zajec5@gmail.com>"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/spi-bcm53xx.h b/drivers/spi/spi-bcm53xx.h deleted file mode 100644 index 03e3442086ec77..00000000000000 --- a/drivers/spi/spi-bcm53xx.h +++ /dev/null @@ -1,73 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef SPI_BCM53XX_H -#define SPI_BCM53XX_H - -#define B53SPI_BSPI_REVISION_ID 0x000 -#define B53SPI_BSPI_SCRATCH 0x004 -#define B53SPI_BSPI_MAST_N_BOOT_CTRL 0x008 -#define B53SPI_BSPI_BUSY_STATUS 0x00c -#define B53SPI_BSPI_INTR_STATUS 0x010 -#define B53SPI_BSPI_B0_STATUS 0x014 -#define B53SPI_BSPI_B0_CTRL 0x018 -#define B53SPI_BSPI_B1_STATUS 0x01c -#define B53SPI_BSPI_B1_CTRL 0x020 -#define B53SPI_BSPI_STRAP_OVERRIDE_CTRL 0x024 -#define B53SPI_BSPI_FLEX_MODE_ENABLE 0x028 -#define B53SPI_BSPI_BITS_PER_CYCLE 0x02c -#define B53SPI_BSPI_BITS_PER_PHASE 0x030 -#define B53SPI_BSPI_CMD_AND_MODE_BYTE 0x034 -#define B53SPI_BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038 -#define B53SPI_BSPI_BSPI_XOR_VALUE 0x03c -#define B53SPI_BSPI_BSPI_XOR_ENABLE 0x040 -#define B53SPI_BSPI_BSPI_PIO_MODE_ENABLE 0x044 -#define B53SPI_BSPI_BSPI_PIO_IODIR 0x048 -#define B53SPI_BSPI_BSPI_PIO_DATA 0x04c - -/* RAF */ -#define B53SPI_RAF_START_ADDR 0x100 -#define B53SPI_RAF_NUM_WORDS 0x104 -#define B53SPI_RAF_CTRL 0x108 -#define B53SPI_RAF_FULLNESS 0x10c -#define B53SPI_RAF_WATERMARK 0x110 -#define B53SPI_RAF_STATUS 0x114 -#define B53SPI_RAF_READ_DATA 0x118 -#define B53SPI_RAF_WORD_CNT 0x11c -#define B53SPI_RAF_CURR_ADDR 0x120 - -/* MSPI */ -#define B53SPI_MSPI_SPCR0_LSB 0x200 -#define B53SPI_MSPI_SPCR0_MSB 0x204 -#define B53SPI_MSPI_SPCR1_LSB 0x208 -#define B53SPI_MSPI_SPCR1_MSB 0x20c -#define B53SPI_MSPI_NEWQP 0x210 -#define B53SPI_MSPI_ENDQP 0x214 -#define B53SPI_MSPI_SPCR2 0x218 -#define B53SPI_MSPI_SPCR2_SPE 0x00000040 -#define B53SPI_MSPI_SPCR2_CONT_AFTER_CMD 0x00000080 -#define B53SPI_MSPI_MSPI_STATUS 0x220 -#define B53SPI_MSPI_MSPI_STATUS_SPIF 0x00000001 -#define B53SPI_MSPI_CPTQP 0x224 -#define B53SPI_MSPI_TXRAM 0x240 /* 32 registers, up to 0x2b8 */ -#define B53SPI_MSPI_RXRAM 0x2c0 /* 32 registers, up to 0x33c */ -#define B53SPI_MSPI_CDRAM 0x340 /* 16 registers, up to 0x37c */ -#define B53SPI_CDRAM_PCS_PCS0 0x00000001 -#define B53SPI_CDRAM_PCS_PCS1 0x00000002 -#define B53SPI_CDRAM_PCS_PCS2 0x00000004 -#define B53SPI_CDRAM_PCS_PCS3 0x00000008 -#define B53SPI_CDRAM_PCS_DISABLE_ALL 0x0000000f -#define B53SPI_CDRAM_PCS_DSCK 0x00000010 -#define B53SPI_CDRAM_BITSE 0x00000040 -#define B53SPI_CDRAM_CONT 0x00000080 -#define B53SPI_MSPI_WRITE_LOCK 0x380 -#define B53SPI_MSPI_DISABLE_FLUSH_GEN 0x384 - -/* Interrupt */ -#define B53SPI_INTR_RAF_LR_FULLNESS_REACHED 0x3a0 -#define B53SPI_INTR_RAF_LR_TRUNCATED 0x3a4 -#define B53SPI_INTR_RAF_LR_IMPATIENT 0x3a8 -#define B53SPI_INTR_RAF_LR_SESSION_DONE 0x3ac -#define B53SPI_INTR_RAF_LR_OVERREAD 0x3b0 -#define B53SPI_INTR_MSPI_DONE 0x3b4 -#define B53SPI_INTR_MSPI_HALT_SET_TRANSACTION_DONE 0x3b8 - -#endif /* SPI_BCM53XX_H */ diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c index cbcba614b25337..c23849f7aa7bc6 100644 --- a/drivers/spi/spi-bcm63xx-hsspi.c +++ b/drivers/spi/spi-bcm63xx-hsspi.c @@ -352,22 +352,31 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev) if (IS_ERR(clk)) return PTR_ERR(clk); + ret = clk_prepare_enable(clk); + if (ret) + return ret; + rate = clk_get_rate(clk); if (!rate) { struct clk *pll_clk = devm_clk_get(dev, "pll"); - if (IS_ERR(pll_clk)) - return PTR_ERR(pll_clk); + if (IS_ERR(pll_clk)) { + ret = PTR_ERR(pll_clk); + goto out_disable_clk; + } + + ret = clk_prepare_enable(pll_clk); + if (ret) + goto out_disable_clk; rate = clk_get_rate(pll_clk); - if (!rate) - return -EINVAL; + clk_disable_unprepare(pll_clk); + if (!rate) { + ret = -EINVAL; + goto out_disable_clk; + } } - ret = clk_prepare_enable(clk); - if (ret) - return ret; - master = spi_alloc_master(&pdev->dev, sizeof(*bs)); if (!master) { ret = -ENOMEM; diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index 4a001634023e09..f3dad6fcdc3523 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -694,8 +694,7 @@ static int cdns_spi_remove(struct platform_device *pdev) */ static int __maybe_unused cdns_spi_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct spi_master *master = platform_get_drvdata(pdev); + struct spi_master *master = dev_get_drvdata(dev); return spi_master_suspend(master); } @@ -710,8 +709,7 @@ static int __maybe_unused cdns_spi_suspend(struct device *dev) */ static int __maybe_unused cdns_spi_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct spi_master *master = platform_get_drvdata(pdev); + struct spi_master *master = dev_get_drvdata(dev); struct cdns_spi *xspi = spi_master_get_devdata(master); cdns_spi_init_hw(xspi); diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c index cb3c73007ca15a..e6d5cc6ab108b1 100644 --- a/drivers/spi/spi-fsl-lpspi.c +++ b/drivers/spi/spi-fsl-lpspi.c @@ -1,19 +1,8 @@ -/* - * Freescale i.MX7ULP LPSPI driver - * - * Copyright 2016 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Freescale i.MX7ULP LPSPI driver +// +// Copyright 2016 Freescale Semiconductor, Inc. #include <linux/clk.h> #include <linux/completion.h> diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index a056ee88a960bf..866246f2104102 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -1,22 +1,6 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 Juergen Beisert - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation - * 51 Franklin Street, Fifth Floor - * Boston, MA 02110-1301, USA. - */ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. +// Copyright (C) 2008 Juergen Beisert #include <linux/clk.h> #include <linux/completion.h> diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c new file mode 100644 index 00000000000000..990770dfa5cf52 --- /dev/null +++ b/drivers/spi/spi-mem.c @@ -0,0 +1,410 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Exceet Electronics GmbH + * Copyright (C) 2018 Bootlin + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ +#include <linux/dmaengine.h> +#include <linux/pm_runtime.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi-mem.h> + +#include "internals.h" + +/** + * spi_controller_dma_map_mem_op_data() - DMA-map the buffer attached to a + * memory operation + * @ctlr: the SPI controller requesting this dma_map() + * @op: the memory operation containing the buffer to map + * @sgt: a pointer to a non-initialized sg_table that will be filled by this + * function + * + * Some controllers might want to do DMA on the data buffer embedded in @op. + * This helper prepares everything for you and provides a ready-to-use + * sg_table. This function is not intended to be called from spi drivers. + * Only SPI controller drivers should use it. + * Note that the caller must ensure the memory region pointed by + * op->data.buf.{in,out} is DMA-able before calling this function. + * + * Return: 0 in case of success, a negative error code otherwise. + */ +int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr, + const struct spi_mem_op *op, + struct sg_table *sgt) +{ + struct device *dmadev; + + if (!op->data.nbytes) + return -EINVAL; + + if (op->data.dir == SPI_MEM_DATA_OUT && ctlr->dma_tx) + dmadev = ctlr->dma_tx->device->dev; + else if (op->data.dir == SPI_MEM_DATA_IN && ctlr->dma_rx) + dmadev = ctlr->dma_rx->device->dev; + else + dmadev = ctlr->dev.parent; + + if (!dmadev) + return -EINVAL; + + return spi_map_buf(ctlr, dmadev, sgt, op->data.buf.in, op->data.nbytes, + op->data.dir == SPI_MEM_DATA_IN ? + DMA_FROM_DEVICE : DMA_TO_DEVICE); +} +EXPORT_SYMBOL_GPL(spi_controller_dma_map_mem_op_data); + +/** + * spi_controller_dma_unmap_mem_op_data() - DMA-unmap the buffer attached to a + * memory operation + * @ctlr: the SPI controller requesting this dma_unmap() + * @op: the memory operation containing the buffer to unmap + * @sgt: a pointer to an sg_table previously initialized by + * spi_controller_dma_map_mem_op_data() + * + * Some controllers might want to do DMA on the data buffer embedded in @op. + * This helper prepares things so that the CPU can access the + * op->data.buf.{in,out} buffer again. + * + * This function is not intended to be called from SPI drivers. Only SPI + * controller drivers should use it. + * + * This function should be called after the DMA operation has finished and is + * only valid if the previous spi_controller_dma_map_mem_op_data() call + * returned 0. + * + * Return: 0 in case of success, a negative error code otherwise. + */ +void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr, + const struct spi_mem_op *op, + struct sg_table *sgt) +{ + struct device *dmadev; + + if (!op->data.nbytes) + return; + + if (op->data.dir == SPI_MEM_DATA_OUT && ctlr->dma_tx) + dmadev = ctlr->dma_tx->device->dev; + else if (op->data.dir == SPI_MEM_DATA_IN && ctlr->dma_rx) + dmadev = ctlr->dma_rx->device->dev; + else + dmadev = ctlr->dev.parent; + + spi_unmap_buf(ctlr, dmadev, sgt, + op->data.dir == SPI_MEM_DATA_IN ? + DMA_FROM_DEVICE : DMA_TO_DEVICE); +} +EXPORT_SYMBOL_GPL(spi_controller_dma_unmap_mem_op_data); + +static int spi_check_buswidth_req(struct spi_mem *mem, u8 buswidth, bool tx) +{ + u32 mode = mem->spi->mode; + + switch (buswidth) { + case 1: + return 0; + + case 2: + if ((tx && (mode & (SPI_TX_DUAL | SPI_TX_QUAD))) || + (!tx && (mode & (SPI_RX_DUAL | SPI_RX_QUAD)))) + return 0; + + break; + + case 4: + if ((tx && (mode & SPI_TX_QUAD)) || + (!tx && (mode & SPI_RX_QUAD))) + return 0; + + break; + + default: + break; + } + + return -ENOTSUPP; +} + +static bool spi_mem_default_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + if (spi_check_buswidth_req(mem, op->cmd.buswidth, true)) + return false; + + if (op->addr.nbytes && + spi_check_buswidth_req(mem, op->addr.buswidth, true)) + return false; + + if (op->dummy.nbytes && + spi_check_buswidth_req(mem, op->dummy.buswidth, true)) + return false; + + if (op->data.nbytes && + spi_check_buswidth_req(mem, op->data.buswidth, + op->data.dir == SPI_MEM_DATA_OUT)) + return false; + + return true; +} +EXPORT_SYMBOL_GPL(spi_mem_default_supports_op); + +/** + * spi_mem_supports_op() - Check if a memory device and the controller it is + * connected to support a specific memory operation + * @mem: the SPI memory + * @op: the memory operation to check + * + * Some controllers are only supporting Single or Dual IOs, others might only + * support specific opcodes, or it can even be that the controller and device + * both support Quad IOs but the hardware prevents you from using it because + * only 2 IO lines are connected. + * + * This function checks whether a specific operation is supported. + * + * Return: true if @op is supported, false otherwise. + */ +bool spi_mem_supports_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct spi_controller *ctlr = mem->spi->controller; + + if (ctlr->mem_ops && ctlr->mem_ops->supports_op) + return ctlr->mem_ops->supports_op(mem, op); + + return spi_mem_default_supports_op(mem, op); +} +EXPORT_SYMBOL_GPL(spi_mem_supports_op); + +/** + * spi_mem_exec_op() - Execute a memory operation + * @mem: the SPI memory + * @op: the memory operation to execute + * + * Executes a memory operation. + * + * This function first checks that @op is supported and then tries to execute + * it. + * + * Return: 0 in case of success, a negative error code otherwise. + */ +int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + unsigned int tmpbufsize, xferpos = 0, totalxferlen = 0; + struct spi_controller *ctlr = mem->spi->controller; + struct spi_transfer xfers[4] = { }; + struct spi_message msg; + u8 *tmpbuf; + int ret; + + if (!spi_mem_supports_op(mem, op)) + return -ENOTSUPP; + + if (ctlr->mem_ops) { + /* + * Flush the message queue before executing our SPI memory + * operation to prevent preemption of regular SPI transfers. + */ + spi_flush_queue(ctlr); + + if (ctlr->auto_runtime_pm) { + ret = pm_runtime_get_sync(ctlr->dev.parent); + if (ret < 0) { + dev_err(&ctlr->dev, + "Failed to power device: %d\n", + ret); + return ret; + } + } + + mutex_lock(&ctlr->bus_lock_mutex); + mutex_lock(&ctlr->io_mutex); + ret = ctlr->mem_ops->exec_op(mem, op); + mutex_unlock(&ctlr->io_mutex); + mutex_unlock(&ctlr->bus_lock_mutex); + + if (ctlr->auto_runtime_pm) + pm_runtime_put(ctlr->dev.parent); + + /* + * Some controllers only optimize specific paths (typically the + * read path) and expect the core to use the regular SPI + * interface in other cases. + */ + if (!ret || ret != -ENOTSUPP) + return ret; + } + + tmpbufsize = sizeof(op->cmd.opcode) + op->addr.nbytes + + op->dummy.nbytes; + + /* + * Allocate a buffer to transmit the CMD, ADDR cycles with kmalloc() so + * we're guaranteed that this buffer is DMA-able, as required by the + * SPI layer. + */ + tmpbuf = kzalloc(tmpbufsize, GFP_KERNEL | GFP_DMA); + if (!tmpbuf) + return -ENOMEM; + + spi_message_init(&msg); + + tmpbuf[0] = op->cmd.opcode; + xfers[xferpos].tx_buf = tmpbuf; + xfers[xferpos].len = sizeof(op->cmd.opcode); + xfers[xferpos].tx_nbits = op->cmd.buswidth; + spi_message_add_tail(&xfers[xferpos], &msg); + xferpos++; + totalxferlen++; + + if (op->addr.nbytes) { + int i; + + for (i = 0; i < op->addr.nbytes; i++) + tmpbuf[i + 1] = op->addr.val >> + (8 * (op->addr.nbytes - i - 1)); + + xfers[xferpos].tx_buf = tmpbuf + 1; + xfers[xferpos].len = op->addr.nbytes; + xfers[xferpos].tx_nbits = op->addr.buswidth; + spi_message_add_tail(&xfers[xferpos], &msg); + xferpos++; + totalxferlen += op->addr.nbytes; + } + + if (op->dummy.nbytes) { + memset(tmpbuf + op->addr.nbytes + 1, 0xff, op->dummy.nbytes); + xfers[xferpos].tx_buf = tmpbuf + op->addr.nbytes + 1; + xfers[xferpos].len = op->dummy.nbytes; + xfers[xferpos].tx_nbits = op->dummy.buswidth; + spi_message_add_tail(&xfers[xferpos], &msg); + xferpos++; + totalxferlen += op->dummy.nbytes; + } + + if (op->data.nbytes) { + if (op->data.dir == SPI_MEM_DATA_IN) { + xfers[xferpos].rx_buf = op->data.buf.in; + xfers[xferpos].rx_nbits = op->data.buswidth; + } else { + xfers[xferpos].tx_buf = op->data.buf.out; + xfers[xferpos].tx_nbits = op->data.buswidth; + } + + xfers[xferpos].len = op->data.nbytes; + spi_message_add_tail(&xfers[xferpos], &msg); + xferpos++; + totalxferlen += op->data.nbytes; + } + + ret = spi_sync(mem->spi, &msg); + + kfree(tmpbuf); + + if (ret) + return ret; + + if (msg.actual_length != totalxferlen) + return -EIO; + + return 0; +} +EXPORT_SYMBOL_GPL(spi_mem_exec_op); + +/** + * spi_mem_adjust_op_size() - Adjust the data size of a SPI mem operation to + * match controller limitations + * @mem: the SPI memory + * @op: the operation to adjust + * + * Some controllers have FIFO limitations and must split a data transfer + * operation into multiple ones, others require a specific alignment for + * optimized accesses. This function allows SPI mem drivers to split a single + * operation into multiple sub-operations when required. + * + * Return: a negative error code if the controller can't properly adjust @op, + * 0 otherwise. Note that @op->data.nbytes will be updated if @op + * can't be handled in a single step. + */ +int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) +{ + struct spi_controller *ctlr = mem->spi->controller; + + if (ctlr->mem_ops && ctlr->mem_ops->adjust_op_size) + return ctlr->mem_ops->adjust_op_size(mem, op); + + return 0; +} +EXPORT_SYMBOL_GPL(spi_mem_adjust_op_size); + +static inline struct spi_mem_driver *to_spi_mem_drv(struct device_driver *drv) +{ + return container_of(drv, struct spi_mem_driver, spidrv.driver); +} + +static int spi_mem_probe(struct spi_device *spi) +{ + struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver); + struct spi_mem *mem; + + mem = devm_kzalloc(&spi->dev, sizeof(*mem), GFP_KERNEL); + if (!mem) + return -ENOMEM; + + mem->spi = spi; + spi_set_drvdata(spi, mem); + + return memdrv->probe(mem); +} + +static int spi_mem_remove(struct spi_device *spi) +{ + struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver); + struct spi_mem *mem = spi_get_drvdata(spi); + + if (memdrv->remove) + return memdrv->remove(mem); + + return 0; +} + +static void spi_mem_shutdown(struct spi_device *spi) +{ + struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver); + struct spi_mem *mem = spi_get_drvdata(spi); + + if (memdrv->shutdown) + memdrv->shutdown(mem); +} + +/** + * spi_mem_driver_register_with_owner() - Register a SPI memory driver + * @memdrv: the SPI memory driver to register + * @owner: the owner of this driver + * + * Registers a SPI memory driver. + * + * Return: 0 in case of success, a negative error core otherwise. + */ + +int spi_mem_driver_register_with_owner(struct spi_mem_driver *memdrv, + struct module *owner) +{ + memdrv->spidrv.probe = spi_mem_probe; + memdrv->spidrv.remove = spi_mem_remove; + memdrv->spidrv.shutdown = spi_mem_shutdown; + + return __spi_register_driver(owner, &memdrv->spidrv); +} +EXPORT_SYMBOL_GPL(spi_mem_driver_register_with_owner); + +/** + * spi_mem_driver_unregister_with_owner() - Unregister a SPI memory driver + * @memdrv: the SPI memory driver to unregister + * + * Unregisters a SPI memory driver. + */ +void spi_mem_driver_unregister(struct spi_mem_driver *memdrv) +{ + spi_unregister_driver(&memdrv->spidrv); +} +EXPORT_SYMBOL_GPL(spi_mem_driver_unregister); diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c index 5c82910e3480d0..7fe4488ace5790 100644 --- a/drivers/spi/spi-meson-spicc.c +++ b/drivers/spi/spi-meson-spicc.c @@ -574,10 +574,15 @@ static int meson_spicc_probe(struct platform_device *pdev) master->max_speed_hz = rate >> 2; ret = devm_spi_register_master(&pdev->dev, master); - if (!ret) - return 0; + if (ret) { + dev_err(&pdev->dev, "spi master registration failed\n"); + goto out_clk; + } - dev_err(&pdev->dev, "spi master registration failed\n"); + return 0; + +out_clk: + clk_disable_unprepare(spicc->core); out_master: spi_master_put(master); diff --git a/drivers/spi/spi-mpc52xx.c b/drivers/spi/spi-mpc52xx.c index e8b59ce4dc3a74..0e55784a3ad936 100644 --- a/drivers/spi/spi-mpc52xx.c +++ b/drivers/spi/spi-mpc52xx.c @@ -447,7 +447,7 @@ static int mpc52xx_spi_probe(struct platform_device *op) for (i = 0; i < ms->gpio_cs_count; i++) { gpio_cs = of_get_gpio(op->dev.of_node, i); - if (gpio_cs < 0) { + if (!gpio_is_valid(gpio_cs)) { dev_err(&op->dev, "could not parse the gpio field in oftree\n"); rc = -ENODEV; diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index 3d216b950b4151..6ac95a2a21cef5 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -1,32 +1,22 @@ -/* - * Freescale MXS SPI master driver - * - * Copyright 2012 DENX Software Engineering, GmbH. - * Copyright 2012 Freescale Semiconductor, Inc. - * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. - * - * Rework and transition to new API by: - * Marek Vasut <marex@denx.de> - * - * Based on previous attempt by: - * Fabio Estevam <fabio.estevam@freescale.com> - * - * Based on code from U-Boot bootloader by: - * Marek Vasut <marex@denx.de> - * - * Based on spi-stmp.c, which is: - * Author: Dmitry Pervushin <dimka@embeddedalley.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Freescale MXS SPI master driver +// +// Copyright 2012 DENX Software Engineering, GmbH. +// Copyright 2012 Freescale Semiconductor, Inc. +// Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. +// +// Rework and transition to new API by: +// Marek Vasut <marex@denx.de> +// +// Based on previous attempt by: +// Fabio Estevam <fabio.estevam@freescale.com> +// +// Based on code from U-Boot bootloader by: +// Marek Vasut <marex@denx.de> +// +// Based on spi-stmp.c, which is: +// Author: Dmitry Pervushin <dimka@embeddedalley.com> #include <linux/kernel.h> #include <linux/ioport.h> diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 9bf64e6eca9ba7..6c628a54e94694 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -255,6 +255,7 @@ static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable) if (spi->controller_state) { int err = pm_runtime_get_sync(mcspi->dev); if (err < 0) { + pm_runtime_put_noidle(mcspi->dev); dev_err(mcspi->dev, "failed to get sync: %d\n", err); return; } @@ -350,20 +351,6 @@ disable_fifo: mcspi->fifo_depth = 0; } -static void omap2_mcspi_restore_ctx(struct omap2_mcspi *mcspi) -{ - struct spi_master *spi_cntrl = mcspi->master; - struct omap2_mcspi_regs *ctx = &mcspi->ctx; - struct omap2_mcspi_cs *cs; - - /* McSPI: context restore */ - mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_MODULCTRL, ctx->modulctrl); - mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_WAKEUPENABLE, ctx->wakeupenable); - - list_for_each_entry(cs, &ctx->cs, node) - writel_relaxed(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0); -} - static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) { unsigned long timeout; @@ -1065,8 +1052,11 @@ static int omap2_mcspi_setup(struct spi_device *spi) } ret = pm_runtime_get_sync(mcspi->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_noidle(mcspi->dev); + return ret; + } ret = omap2_mcspi_setup_transfer(spi, NULL); pm_runtime_mark_last_busy(mcspi->dev); @@ -1284,8 +1274,11 @@ static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi) int ret = 0; ret = pm_runtime_get_sync(mcspi->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_noidle(mcspi->dev); + return ret; + } mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE, OMAP2_MCSPI_WAKEUPENABLE_WKEN); @@ -1297,14 +1290,39 @@ static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi) return 0; } +/* + * When SPI wake up from off-mode, CS is in activate state. If it was in + * inactive state when driver was suspend, then force it to inactive state at + * wake up. + */ static int omap_mcspi_runtime_resume(struct device *dev) { - struct omap2_mcspi *mcspi; - struct spi_master *master; + struct spi_master *master = dev_get_drvdata(dev); + struct omap2_mcspi *mcspi = spi_master_get_devdata(master); + struct omap2_mcspi_regs *ctx = &mcspi->ctx; + struct omap2_mcspi_cs *cs; - master = dev_get_drvdata(dev); - mcspi = spi_master_get_devdata(master); - omap2_mcspi_restore_ctx(mcspi); + /* McSPI: context restore */ + mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, ctx->modulctrl); + mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE, ctx->wakeupenable); + + list_for_each_entry(cs, &ctx->cs, node) { + /* + * We need to toggle CS state for OMAP take this + * change in account. + */ + if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE) == 0) { + cs->chconf0 |= OMAP2_MCSPI_CHCONF_FORCE; + writel_relaxed(cs->chconf0, + cs->base + OMAP2_MCSPI_CHCONF0); + cs->chconf0 &= ~OMAP2_MCSPI_CHCONF_FORCE; + writel_relaxed(cs->chconf0, + cs->base + OMAP2_MCSPI_CHCONF0); + } else { + writel_relaxed(cs->chconf0, + cs->base + OMAP2_MCSPI_CHCONF0); + } + } return 0; } @@ -1447,50 +1465,33 @@ static int omap2_mcspi_remove(struct platform_device *pdev) MODULE_ALIAS("platform:omap2_mcspi"); #ifdef CONFIG_SUSPEND -/* - * When SPI wake up from off-mode, CS is in activate state. If it was in - * unactive state when driver was suspend, then force it to unactive state at - * wake up. - */ -static int omap2_mcspi_resume(struct device *dev) +static int omap2_mcspi_suspend_noirq(struct device *dev) { - struct spi_master *master = dev_get_drvdata(dev); - struct omap2_mcspi *mcspi = spi_master_get_devdata(master); - struct omap2_mcspi_regs *ctx = &mcspi->ctx; - struct omap2_mcspi_cs *cs; - - pm_runtime_get_sync(mcspi->dev); - list_for_each_entry(cs, &ctx->cs, node) { - if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE) == 0) { - /* - * We need to toggle CS state for OMAP take this - * change in account. - */ - cs->chconf0 |= OMAP2_MCSPI_CHCONF_FORCE; - writel_relaxed(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0); - cs->chconf0 &= ~OMAP2_MCSPI_CHCONF_FORCE; - writel_relaxed(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0); - } - } - pm_runtime_mark_last_busy(mcspi->dev); - pm_runtime_put_autosuspend(mcspi->dev); - - return pinctrl_pm_select_default_state(dev); + return pinctrl_pm_select_sleep_state(dev); } -static int omap2_mcspi_suspend(struct device *dev) +static int omap2_mcspi_resume_noirq(struct device *dev) { - return pinctrl_pm_select_sleep_state(dev); + struct spi_master *master = dev_get_drvdata(dev); + struct omap2_mcspi *mcspi = spi_master_get_devdata(master); + int error; + + error = pinctrl_pm_select_default_state(dev); + if (error) + dev_warn(mcspi->dev, "%s: failed to set pins: %i\n", + __func__, error); + + return 0; } #else -#define omap2_mcspi_suspend NULL -#define omap2_mcspi_resume NULL +#define omap2_mcspi_suspend_noirq NULL +#define omap2_mcspi_resume_noirq NULL #endif static const struct dev_pm_ops omap2_mcspi_pm_ops = { - .resume = omap2_mcspi_resume, - .suspend = omap2_mcspi_suspend, + .suspend_noirq = omap2_mcspi_suspend_noirq, + .resume_noirq = omap2_mcspi_resume_noirq, .runtime_resume = omap_mcspi_runtime_resume, }; diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c index 3d7f66080c57a1..2fa7f4b4349295 100644 --- a/drivers/spi/spi-pxa2xx-dma.c +++ b/drivers/spi/spi-pxa2xx-dma.c @@ -51,19 +51,15 @@ static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data, if (!pxa25x_ssp_comp(drv_data)) pxa2xx_spi_write(drv_data, SSTO, 0); - if (!error) { - msg->actual_length += drv_data->len; - msg->state = pxa2xx_spi_next_transfer(drv_data); - } else { + if (error) { /* In case we got an error we disable the SSP now */ pxa2xx_spi_write(drv_data, SSCR0, pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE); - - msg->state = ERROR_STATE; + msg->status = -EIO; } - tasklet_schedule(&drv_data->pump_transfers); + spi_finalize_current_transfer(drv_data->master); } } @@ -74,11 +70,11 @@ static void pxa2xx_spi_dma_callback(void *data) static struct dma_async_tx_descriptor * pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data, - enum dma_transfer_direction dir) + enum dma_transfer_direction dir, + struct spi_transfer *xfer) { struct chip_data *chip = spi_get_ctldata(drv_data->master->cur_msg->spi); - struct spi_transfer *xfer = drv_data->cur_transfer; enum dma_slave_buswidth width; struct dma_slave_config cfg; struct dma_chan *chan; @@ -144,12 +140,13 @@ irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data) return IRQ_NONE; } -int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst) +int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, + struct spi_transfer *xfer) { struct dma_async_tx_descriptor *tx_desc, *rx_desc; int err; - tx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_MEM_TO_DEV); + tx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_MEM_TO_DEV, xfer); if (!tx_desc) { dev_err(&drv_data->pdev->dev, "failed to get DMA TX descriptor\n"); @@ -157,7 +154,7 @@ int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst) goto err_tx; } - rx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_DEV_TO_MEM); + rx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_DEV_TO_MEM, xfer); if (!rx_desc) { dev_err(&drv_data->pdev->dev, "failed to get DMA RX descriptor\n"); @@ -187,6 +184,13 @@ void pxa2xx_spi_dma_start(struct driver_data *drv_data) atomic_set(&drv_data->dma_running, 1); } +void pxa2xx_spi_dma_stop(struct driver_data *drv_data) +{ + atomic_set(&drv_data->dma_running, 0); + dmaengine_terminate_sync(drv_data->master->dma_rx); + dmaengine_terminate_sync(drv_data->master->dma_tx); +} + int pxa2xx_spi_dma_setup(struct driver_data *drv_data) { struct pxa2xx_spi_master *pdata = drv_data->master_info; diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 82dcb88fcfba48..0b2d60d30f6934 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -340,9 +340,11 @@ static void lpss_ssp_setup(struct driver_data *drv_data) } } -static void lpss_ssp_select_cs(struct driver_data *drv_data, +static void lpss_ssp_select_cs(struct spi_device *spi, const struct lpss_config *config) { + struct driver_data *drv_data = + spi_controller_get_devdata(spi->controller); u32 value, cs; if (!config->cs_sel_mask) @@ -350,7 +352,7 @@ static void lpss_ssp_select_cs(struct driver_data *drv_data, value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl); - cs = drv_data->master->cur_msg->spi->chip_select; + cs = spi->chip_select; cs <<= config->cs_sel_shift; if (cs != (value & config->cs_sel_mask)) { /* @@ -369,15 +371,17 @@ static void lpss_ssp_select_cs(struct driver_data *drv_data, } } -static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable) +static void lpss_ssp_cs_control(struct spi_device *spi, bool enable) { + struct driver_data *drv_data = + spi_controller_get_devdata(spi->controller); const struct lpss_config *config; u32 value; config = lpss_get_config(drv_data); if (enable) - lpss_ssp_select_cs(drv_data, config); + lpss_ssp_select_cs(spi, config); value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl); if (enable) @@ -387,10 +391,11 @@ static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable) __lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value); } -static void cs_assert(struct driver_data *drv_data) +static void cs_assert(struct spi_device *spi) { - struct chip_data *chip = - spi_get_ctldata(drv_data->master->cur_msg->spi); + struct chip_data *chip = spi_get_ctldata(spi); + struct driver_data *drv_data = + spi_controller_get_devdata(spi->controller); if (drv_data->ssp_type == CE4100_SSP) { pxa2xx_spi_write(drv_data, SSSR, chip->frm); @@ -408,13 +413,14 @@ static void cs_assert(struct driver_data *drv_data) } if (is_lpss_ssp(drv_data)) - lpss_ssp_cs_control(drv_data, true); + lpss_ssp_cs_control(spi, true); } -static void cs_deassert(struct driver_data *drv_data) +static void cs_deassert(struct spi_device *spi) { - struct chip_data *chip = - spi_get_ctldata(drv_data->master->cur_msg->spi); + struct chip_data *chip = spi_get_ctldata(spi); + struct driver_data *drv_data = + spi_controller_get_devdata(spi->controller); unsigned long timeout; if (drv_data->ssp_type == CE4100_SSP) @@ -437,7 +443,15 @@ static void cs_deassert(struct driver_data *drv_data) } if (is_lpss_ssp(drv_data)) - lpss_ssp_cs_control(drv_data, false); + lpss_ssp_cs_control(spi, false); +} + +static void pxa2xx_spi_set_cs(struct spi_device *spi, bool level) +{ + if (level) + cs_deassert(spi); + else + cs_assert(spi); } int pxa2xx_spi_flush(struct driver_data *drv_data) @@ -549,70 +563,6 @@ static int u32_reader(struct driver_data *drv_data) return drv_data->rx == drv_data->rx_end; } -void *pxa2xx_spi_next_transfer(struct driver_data *drv_data) -{ - struct spi_message *msg = drv_data->master->cur_msg; - struct spi_transfer *trans = drv_data->cur_transfer; - - /* Move to next transfer */ - if (trans->transfer_list.next != &msg->transfers) { - drv_data->cur_transfer = - list_entry(trans->transfer_list.next, - struct spi_transfer, - transfer_list); - return RUNNING_STATE; - } else - return DONE_STATE; -} - -/* caller already set message->status; dma and pio irqs are blocked */ -static void giveback(struct driver_data *drv_data) -{ - struct spi_transfer* last_transfer; - struct spi_message *msg; - - msg = drv_data->master->cur_msg; - drv_data->cur_transfer = NULL; - - last_transfer = list_last_entry(&msg->transfers, struct spi_transfer, - transfer_list); - - /* Delay if requested before any change in chip select */ - if (last_transfer->delay_usecs) - udelay(last_transfer->delay_usecs); - - /* Drop chip select UNLESS cs_change is true or we are returning - * a message with an error, or next message is for another chip - */ - if (!last_transfer->cs_change) - cs_deassert(drv_data); - else { - struct spi_message *next_msg; - - /* Holding of cs was hinted, but we need to make sure - * the next message is for the same chip. Don't waste - * time with the following tests unless this was hinted. - * - * We cannot postpone this until pump_messages, because - * after calling msg->complete (below) the driver that - * sent the current message could be unloaded, which - * could invalidate the cs_control() callback... - */ - - /* get a pointer to the next message, if any */ - next_msg = spi_get_next_queued_message(drv_data->master); - - /* see if the next and current messages point - * to the same chip - */ - if ((next_msg && next_msg->spi != msg->spi) || - msg->state == ERROR_STATE) - cs_deassert(drv_data); - } - - spi_finalize_current_message(drv_data->master); -} - static void reset_sccr1(struct driver_data *drv_data) { struct chip_data *chip = @@ -648,8 +598,8 @@ static void int_error_stop(struct driver_data *drv_data, const char* msg) dev_err(&drv_data->pdev->dev, "%s\n", msg); - drv_data->master->cur_msg->state = ERROR_STATE; - tasklet_schedule(&drv_data->pump_transfers); + drv_data->master->cur_msg->status = -EIO; + spi_finalize_current_transfer(drv_data->master); } static void int_transfer_complete(struct driver_data *drv_data) @@ -660,19 +610,7 @@ static void int_transfer_complete(struct driver_data *drv_data) if (!pxa25x_ssp_comp(drv_data)) pxa2xx_spi_write(drv_data, SSTO, 0); - /* Update total byte transferred return count actual bytes read */ - drv_data->master->cur_msg->actual_length += drv_data->len - - (drv_data->rx_end - drv_data->rx); - - /* Transfer delays and chip select release are - * handled in pump_transfers or giveback - */ - - /* Move to next transfer */ - drv_data->master->cur_msg->state = pxa2xx_spi_next_transfer(drv_data); - - /* Schedule transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); + spi_finalize_current_transfer(drv_data->master); } static irqreturn_t interrupt_transfer(struct driver_data *drv_data) @@ -973,17 +911,16 @@ static bool pxa2xx_spi_can_dma(struct spi_controller *master, xfer->len >= chip->dma_burst_size; } -static void pump_transfers(unsigned long data) +static int pxa2xx_spi_transfer_one(struct spi_controller *master, + struct spi_device *spi, + struct spi_transfer *transfer) { - struct driver_data *drv_data = (struct driver_data *)data; - struct spi_controller *master = drv_data->master; + struct driver_data *drv_data = spi_controller_get_devdata(master); struct spi_message *message = master->cur_msg; struct chip_data *chip = spi_get_ctldata(message->spi); u32 dma_thresh = chip->dma_threshold; u32 dma_burst = chip->dma_burst_size; u32 change_mask = pxa2xx_spi_get_ssrc1_change_mask(drv_data); - struct spi_transfer *transfer; - struct spi_transfer *previous; u32 clk_div; u8 bits; u32 speed; @@ -992,36 +929,6 @@ static void pump_transfers(unsigned long data) int err; int dma_mapped; - /* Get current state information */ - transfer = drv_data->cur_transfer; - - /* Handle for abort */ - if (message->state == ERROR_STATE) { - message->status = -EIO; - giveback(drv_data); - return; - } - - /* Handle end of message */ - if (message->state == DONE_STATE) { - message->status = 0; - giveback(drv_data); - return; - } - - /* Delay if requested at end of transfer before CS change */ - if (message->state == RUNNING_STATE) { - previous = list_entry(transfer->transfer_list.prev, - struct spi_transfer, - transfer_list); - if (previous->delay_usecs) - udelay(previous->delay_usecs); - - /* Drop chip select only if cs_change is requested */ - if (previous->cs_change) - cs_deassert(drv_data); - } - /* Check if we can DMA this transfer */ if (transfer->len > MAX_DMA_LEN && chip->enable_dma) { @@ -1029,34 +936,27 @@ static void pump_transfers(unsigned long data) if (message->is_dma_mapped || transfer->rx_dma || transfer->tx_dma) { dev_err(&drv_data->pdev->dev, - "pump_transfers: mapped transfer length of " - "%u is greater than %d\n", + "Mapped transfer length of %u is greater than %d\n", transfer->len, MAX_DMA_LEN); - message->status = -EINVAL; - giveback(drv_data); - return; + return -EINVAL; } /* warn ... we force this to PIO mode */ dev_warn_ratelimited(&message->spi->dev, - "pump_transfers: DMA disabled for transfer length %ld " - "greater than %d\n", - (long)drv_data->len, MAX_DMA_LEN); + "DMA disabled for transfer length %ld greater than %d\n", + (long)transfer->len, MAX_DMA_LEN); } /* Setup the transfer state based on the type of transfer */ if (pxa2xx_spi_flush(drv_data) == 0) { - dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n"); - message->status = -EIO; - giveback(drv_data); - return; + dev_err(&drv_data->pdev->dev, "Flush failed\n"); + return -EIO; } drv_data->n_bytes = chip->n_bytes; drv_data->tx = (void *)transfer->tx_buf; drv_data->tx_end = drv_data->tx + transfer->len; drv_data->rx = transfer->rx_buf; drv_data->rx_end = drv_data->rx + transfer->len; - drv_data->len = transfer->len; drv_data->write = drv_data->tx ? chip->write : null_writer; drv_data->read = drv_data->rx ? chip->read : null_reader; @@ -1095,11 +995,9 @@ static void pump_transfers(unsigned long data) bits, &dma_burst, &dma_thresh)) dev_warn_ratelimited(&message->spi->dev, - "pump_transfers: DMA burst size reduced to match bits_per_word\n"); + "DMA burst size reduced to match bits_per_word\n"); } - message->state = RUNNING_STATE; - dma_mapped = master->can_dma && master->can_dma(master, message->spi, transfer) && master->cur_msg_mapped; @@ -1108,12 +1006,9 @@ static void pump_transfers(unsigned long data) /* Ensure we have the correct interrupt handler */ drv_data->transfer_handler = pxa2xx_spi_dma_transfer; - err = pxa2xx_spi_dma_prepare(drv_data, dma_burst); - if (err) { - message->status = err; - giveback(drv_data); - return; - } + err = pxa2xx_spi_dma_prepare(drv_data, transfer); + if (err) + return err; /* Clear status and start DMA engine */ cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1; @@ -1175,27 +1070,40 @@ static void pump_transfers(unsigned long data) pxa2xx_spi_write(drv_data, SSTO, chip->timeout); } - cs_assert(drv_data); - - /* after chip select, release the data by enabling service - * requests and interrupts, without changing any mode bits */ + /* + * Release the data by enabling service requests and interrupts, + * without changing any mode bits + */ pxa2xx_spi_write(drv_data, SSCR1, cr1); + + return 1; } -static int pxa2xx_spi_transfer_one_message(struct spi_controller *master, - struct spi_message *msg) +static void pxa2xx_spi_handle_err(struct spi_controller *master, + struct spi_message *msg) { struct driver_data *drv_data = spi_controller_get_devdata(master); - /* Initial message state*/ - msg->state = START_STATE; - drv_data->cur_transfer = list_entry(msg->transfers.next, - struct spi_transfer, - transfer_list); + /* Disable the SSP */ + pxa2xx_spi_write(drv_data, SSCR0, + pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE); + /* Clear and disable interrupts and service requests */ + write_SSSR_CS(drv_data, drv_data->clear_sr); + pxa2xx_spi_write(drv_data, SSCR1, + pxa2xx_spi_read(drv_data, SSCR1) + & ~(drv_data->int_cr1 | drv_data->dma_cr1)); + if (!pxa25x_ssp_comp(drv_data)) + pxa2xx_spi_write(drv_data, SSTO, 0); - /* Mark as busy and launch transfers */ - tasklet_schedule(&drv_data->pump_transfers); - return 0; + /* + * Stop the DMA if running. Note DMA callback handler may have unset + * the dma_running already, which is fine as stopping is not needed + * then but we shouldn't rely this flag for anything else than + * stopping. For instance to differentiate between PIO and DMA + * transfers. + */ + if (atomic_read(&drv_data->dma_running)) + pxa2xx_spi_dma_stop(drv_data); } static int pxa2xx_spi_unprepare_transfer(struct spi_controller *master) @@ -1651,7 +1559,9 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) master->dma_alignment = DMA_ALIGNMENT; master->cleanup = cleanup; master->setup = setup; - master->transfer_one_message = pxa2xx_spi_transfer_one_message; + master->set_cs = pxa2xx_spi_set_cs; + master->transfer_one = pxa2xx_spi_transfer_one; + master->handle_err = pxa2xx_spi_handle_err; master->unprepare_transfer_hardware = pxa2xx_spi_unprepare_transfer; master->fw_translate_cs = pxa2xx_spi_fw_translate_cs; master->auto_runtime_pm = true; @@ -1702,7 +1612,9 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) } /* Enable SOC clock */ - clk_prepare_enable(ssp->clk); + status = clk_prepare_enable(ssp->clk); + if (status) + goto out_error_dma_irq_alloc; master->max_speed_hz = clk_get_rate(ssp->clk); @@ -1787,9 +1699,6 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) } } - tasklet_init(&drv_data->pump_transfers, pump_transfers, - (unsigned long)drv_data); - pm_runtime_set_autosuspend_delay(&pdev->dev, 50); pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_active(&pdev->dev); @@ -1809,6 +1718,8 @@ out_error_clock_enabled: pm_runtime_put_noidle(&pdev->dev); pm_runtime_disable(&pdev->dev); clk_disable_unprepare(ssp->clk); + +out_error_dma_irq_alloc: pxa2xx_spi_dma_release(drv_data); free_irq(ssp->irq, drv_data); @@ -1882,8 +1793,11 @@ static int pxa2xx_spi_resume(struct device *dev) int status; /* Enable the SSP clock */ - if (!pm_runtime_suspended(dev)) - clk_prepare_enable(ssp->clk); + if (!pm_runtime_suspended(dev)) { + status = clk_prepare_enable(ssp->clk); + if (status) + return status; + } /* Restore LPSS private register bits */ if (is_lpss_ssp(drv_data)) @@ -1912,9 +1826,10 @@ static int pxa2xx_spi_runtime_suspend(struct device *dev) static int pxa2xx_spi_runtime_resume(struct device *dev) { struct driver_data *drv_data = dev_get_drvdata(dev); + int status; - clk_prepare_enable(drv_data->ssp->clk); - return 0; + status = clk_prepare_enable(drv_data->ssp->clk); + return status; } #endif diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h index 0ae7defd349200..513c53aaeab233 100644 --- a/drivers/spi/spi-pxa2xx.h +++ b/drivers/spi/spi-pxa2xx.h @@ -46,15 +46,10 @@ struct driver_data { u32 clear_sr; u32 mask_sr; - /* Message Transfer pump */ - struct tasklet_struct pump_transfers; - /* DMA engine support */ atomic_t dma_running; - /* Current message transfer state info */ - struct spi_transfer *cur_transfer; - size_t len; + /* Current transfer state info */ void *tx; void *tx_end; void *rx; @@ -104,11 +99,6 @@ static inline void pxa2xx_spi_write(const struct driver_data *drv_data, __raw_writel(val, drv_data->ioaddr + reg); } -#define START_STATE ((void *)0) -#define RUNNING_STATE ((void *)1) -#define DONE_STATE ((void *)2) -#define ERROR_STATE ((void *)-1) - #define DMA_ALIGNMENT 8 static inline int pxa25x_ssp_comp(struct driver_data *drv_data) @@ -133,14 +123,15 @@ static inline void write_SSSR_CS(struct driver_data *drv_data, u32 val) } extern int pxa2xx_spi_flush(struct driver_data *drv_data); -extern void *pxa2xx_spi_next_transfer(struct driver_data *drv_data); #define MAX_DMA_LEN SZ_64K #define DEFAULT_DMA_CR1 (SSCR1_TSRE | SSCR1_RSRE | SSCR1_TRAIL) extern irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data); -extern int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst); +extern int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, + struct spi_transfer *xfer); extern void pxa2xx_spi_dma_start(struct driver_data *drv_data); +extern void pxa2xx_spi_dma_stop(struct driver_data *drv_data); extern int pxa2xx_spi_dma_setup(struct driver_data *drv_data); extern void pxa2xx_spi_dma_release(struct driver_data *drv_data); extern int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip, diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index baa3a9fa263878..7b7151ec14c8af 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -28,15 +28,15 @@ #define S3C64XX_SPI_CH_CFG 0x00 #define S3C64XX_SPI_CLK_CFG 0x04 -#define S3C64XX_SPI_MODE_CFG 0x08 -#define S3C64XX_SPI_SLAVE_SEL 0x0C +#define S3C64XX_SPI_MODE_CFG 0x08 +#define S3C64XX_SPI_SLAVE_SEL 0x0C #define S3C64XX_SPI_INT_EN 0x10 #define S3C64XX_SPI_STATUS 0x14 #define S3C64XX_SPI_TX_DATA 0x18 #define S3C64XX_SPI_RX_DATA 0x1C -#define S3C64XX_SPI_PACKET_CNT 0x20 -#define S3C64XX_SPI_PENDING_CLR 0x24 -#define S3C64XX_SPI_SWAP_CFG 0x28 +#define S3C64XX_SPI_PACKET_CNT 0x20 +#define S3C64XX_SPI_PENDING_CLR 0x24 +#define S3C64XX_SPI_SWAP_CFG 0x28 #define S3C64XX_SPI_FB_CLK 0x2C #define S3C64XX_SPI_CH_HS_EN (1<<6) /* High Speed Enable */ @@ -77,9 +77,9 @@ #define S3C64XX_SPI_INT_TX_FIFORDY_EN (1<<0) #define S3C64XX_SPI_ST_RX_OVERRUN_ERR (1<<5) -#define S3C64XX_SPI_ST_RX_UNDERRUN_ERR (1<<4) +#define S3C64XX_SPI_ST_RX_UNDERRUN_ERR (1<<4) #define S3C64XX_SPI_ST_TX_OVERRUN_ERR (1<<3) -#define S3C64XX_SPI_ST_TX_UNDERRUN_ERR (1<<2) +#define S3C64XX_SPI_ST_TX_UNDERRUN_ERR (1<<2) #define S3C64XX_SPI_ST_RX_FIFORDY (1<<1) #define S3C64XX_SPI_ST_TX_FIFORDY (1<<0) @@ -100,7 +100,7 @@ #define S3C64XX_SPI_SWAP_TX_BIT (1<<1) #define S3C64XX_SPI_SWAP_TX_EN (1<<0) -#define S3C64XX_SPI_FBCLK_MSK (3<<0) +#define S3C64XX_SPI_FBCLK_MSK (3<<0) #define FIFO_LVL_MASK(i) ((i)->port_conf->fifo_lvl_mask[i->port_id]) #define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & \ @@ -156,7 +156,6 @@ struct s3c64xx_spi_port_config { * @ioclk: Pointer to the i/o clock between master and slave * @master: Pointer to the SPI Protocol master. * @cntrlr_info: Platform specific data for the controller this driver manages. - * @tgl_spi: Pointer to the last CS left untoggled by the cs_change hint. * @lock: Controller specific lock. * @state: Set of FLAGS to indicate status. * @rx_dmach: Controller's DMA channel for Rx. @@ -177,7 +176,6 @@ struct s3c64xx_spi_driver_data { struct platform_device *pdev; struct spi_master *master; struct s3c64xx_spi_info *cntrlr_info; - struct spi_device *tgl_spi; spinlock_t lock; unsigned long sfr_start; struct completion xfer_completion; @@ -190,7 +188,7 @@ struct s3c64xx_spi_driver_data { unsigned int port_id; }; -static void flush_fifo(struct s3c64xx_spi_driver_data *sdd) +static void s3c64xx_flush_fifo(struct s3c64xx_spi_driver_data *sdd) { void __iomem *regs = sdd->regs; unsigned long loops; @@ -350,9 +348,8 @@ static bool s3c64xx_spi_can_dma(struct spi_master *master, return xfer->len > (FIFO_LVL_MASK(sdd) >> 1) + 1; } -static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, - struct spi_device *spi, - struct spi_transfer *xfer, int dma_mode) +static void s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd, + struct spi_transfer *xfer, int dma_mode) { void __iomem *regs = sdd->regs; u32 modecfg, chcfg; @@ -442,8 +439,8 @@ static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd, return RX_FIFO_LVL(status, sdd); } -static int wait_for_dma(struct s3c64xx_spi_driver_data *sdd, - struct spi_transfer *xfer) +static int s3c64xx_wait_for_dma(struct s3c64xx_spi_driver_data *sdd, + struct spi_transfer *xfer) { void __iomem *regs = sdd->regs; unsigned long val; @@ -485,8 +482,8 @@ static int wait_for_dma(struct s3c64xx_spi_driver_data *sdd, return 0; } -static int wait_for_pio(struct s3c64xx_spi_driver_data *sdd, - struct spi_transfer *xfer) +static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd, + struct spi_transfer *xfer) { void __iomem *regs = sdd->regs; unsigned long val; @@ -505,6 +502,8 @@ static int wait_for_pio(struct s3c64xx_spi_driver_data *sdd, status = readl(regs + S3C64XX_SPI_STATUS); } while (RX_FIFO_LVL(status, sdd) < xfer->len && --val); + if (!val) + return -EIO; /* If it was only Tx */ if (!xfer->rx_buf) { @@ -635,11 +634,15 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master, struct spi_transfer *xfer) { struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + const unsigned int fifo_len = (FIFO_LVL_MASK(sdd) >> 1) + 1; + const void *tx_buf = NULL; + void *rx_buf = NULL; + int target_len = 0, origin_len = 0; + int use_dma = 0; int status; u32 speed; u8 bpw; unsigned long flags; - int use_dma; reinit_completion(&sdd->xfer_completion); @@ -654,48 +657,77 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master, s3c64xx_spi_config(sdd); } - /* Polling method for xfers not bigger than FIFO capacity */ - use_dma = 0; - if (!is_polling(sdd) && - (sdd->rx_dma.ch && sdd->tx_dma.ch && - (xfer->len > ((FIFO_LVL_MASK(sdd) >> 1) + 1)))) + if (!is_polling(sdd) && (xfer->len > fifo_len) && + sdd->rx_dma.ch && sdd->tx_dma.ch) { use_dma = 1; - spin_lock_irqsave(&sdd->lock, flags); + } else if (is_polling(sdd) && xfer->len > fifo_len) { + tx_buf = xfer->tx_buf; + rx_buf = xfer->rx_buf; + origin_len = xfer->len; - /* Pending only which is to be done */ - sdd->state &= ~RXBUSY; - sdd->state &= ~TXBUSY; + target_len = xfer->len; + if (xfer->len > fifo_len) + xfer->len = fifo_len; + } - enable_datapath(sdd, spi, xfer, use_dma); + do { + spin_lock_irqsave(&sdd->lock, flags); - /* Start the signals */ - s3c64xx_spi_set_cs(spi, true); + /* Pending only which is to be done */ + sdd->state &= ~RXBUSY; + sdd->state &= ~TXBUSY; - spin_unlock_irqrestore(&sdd->lock, flags); + s3c64xx_enable_datapath(sdd, xfer, use_dma); - if (use_dma) - status = wait_for_dma(sdd, xfer); - else - status = wait_for_pio(sdd, xfer); - - if (status) { - dev_err(&spi->dev, "I/O Error: rx-%d tx-%d res:rx-%c tx-%c len-%d\n", - xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0, - (sdd->state & RXBUSY) ? 'f' : 'p', - (sdd->state & TXBUSY) ? 'f' : 'p', - xfer->len); - - if (use_dma) { - if (xfer->tx_buf != NULL - && (sdd->state & TXBUSY)) - dmaengine_terminate_all(sdd->tx_dma.ch); - if (xfer->rx_buf != NULL - && (sdd->state & RXBUSY)) - dmaengine_terminate_all(sdd->rx_dma.ch); + /* Start the signals */ + s3c64xx_spi_set_cs(spi, true); + + spin_unlock_irqrestore(&sdd->lock, flags); + + if (use_dma) + status = s3c64xx_wait_for_dma(sdd, xfer); + else + status = s3c64xx_wait_for_pio(sdd, xfer); + + if (status) { + dev_err(&spi->dev, + "I/O Error: rx-%d tx-%d res:rx-%c tx-%c len-%d\n", + xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0, + (sdd->state & RXBUSY) ? 'f' : 'p', + (sdd->state & TXBUSY) ? 'f' : 'p', + xfer->len); + + if (use_dma) { + if (xfer->tx_buf && (sdd->state & TXBUSY)) + dmaengine_terminate_all(sdd->tx_dma.ch); + if (xfer->rx_buf && (sdd->state & RXBUSY)) + dmaengine_terminate_all(sdd->rx_dma.ch); + } + } else { + s3c64xx_flush_fifo(sdd); } - } else { - flush_fifo(sdd); + if (target_len > 0) { + target_len -= xfer->len; + + if (xfer->tx_buf) + xfer->tx_buf += xfer->len; + + if (xfer->rx_buf) + xfer->rx_buf += xfer->len; + + if (target_len > fifo_len) + xfer->len = fifo_len; + else + xfer->len = target_len; + } + } while (target_len > 0); + + if (origin_len) { + /* Restore original xfer buffers and length */ + xfer->tx_buf = tx_buf; + xfer->rx_buf = rx_buf; + xfer->len = origin_len; } return status; @@ -891,7 +923,7 @@ static irqreturn_t s3c64xx_spi_irq(int irq, void *data) return IRQ_HANDLED; } -static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) +static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd) { struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; @@ -929,7 +961,7 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) val |= (S3C64XX_SPI_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); writel(val, regs + S3C64XX_SPI_MODE_CFG); - flush_fifo(sdd); + s3c64xx_flush_fifo(sdd); } #ifdef CONFIG_OF @@ -1145,7 +1177,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) pm_runtime_get_sync(&pdev->dev); /* Setup Deufult Mode */ - s3c64xx_spi_hwinit(sdd, sdd->port_id); + s3c64xx_spi_hwinit(sdd); spin_lock_init(&sdd->lock); init_completion(&sdd->xfer_completion); @@ -1260,8 +1292,6 @@ static int s3c64xx_spi_resume(struct device *dev) if (ret < 0) return ret; - s3c64xx_spi_hwinit(sdd, sdd->port_id); - return spi_master_resume(master); } #endif /* CONFIG_PM_SLEEP */ @@ -1299,6 +1329,8 @@ static int s3c64xx_spi_runtime_resume(struct device *dev) if (ret != 0) goto err_disable_src_clk; + s3c64xx_spi_hwinit(sdd); + return 0; err_disable_src_clk: @@ -1344,15 +1376,6 @@ static struct s3c64xx_spi_port_config exynos4_spi_port_config = { .clk_from_cmu = true, }; -static struct s3c64xx_spi_port_config exynos5440_spi_port_config = { - .fifo_lvl_mask = { 0x1ff }, - .rx_lvl_offset = 15, - .tx_st_done = 25, - .high_speed = true, - .clk_from_cmu = true, - .quirks = S3C64XX_SPI_QUIRK_POLL, -}; - static struct s3c64xx_spi_port_config exynos7_spi_port_config = { .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F, 0x7F, 0x7F, 0x1ff}, .rx_lvl_offset = 15, @@ -1396,9 +1419,6 @@ static const struct of_device_id s3c64xx_spi_dt_match[] = { { .compatible = "samsung,exynos4210-spi", .data = (void *)&exynos4_spi_port_config, }, - { .compatible = "samsung,exynos5440-spi", - .data = (void *)&exynos5440_spi_port_config, - }, { .compatible = "samsung,exynos7-spi", .data = (void *)&exynos7_spi_port_config, }, diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 8171eedbfc9003..0e74cbf9929d4a 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -39,7 +39,7 @@ struct sh_msiof_chipdata { u16 tx_fifo_size; u16 rx_fifo_size; u16 master_flags; - u16 min_div; + u16 min_div_pow; }; struct sh_msiof_spi_priv { @@ -51,7 +51,7 @@ struct sh_msiof_spi_priv { struct completion done; unsigned int tx_fifo_size; unsigned int rx_fifo_size; - unsigned int min_div; + unsigned int min_div_pow; void *tx_dma_page; void *rx_dma_page; dma_addr_t tx_dma_addr; @@ -249,43 +249,46 @@ static irqreturn_t sh_msiof_spi_irq(int irq, void *data) return IRQ_HANDLED; } -static struct { - unsigned short div; - unsigned short brdv; -} const sh_msiof_spi_div_table[] = { - { 1, SCR_BRDV_DIV_1 }, - { 2, SCR_BRDV_DIV_2 }, - { 4, SCR_BRDV_DIV_4 }, - { 8, SCR_BRDV_DIV_8 }, - { 16, SCR_BRDV_DIV_16 }, - { 32, SCR_BRDV_DIV_32 }, +static const u32 sh_msiof_spi_div_array[] = { + SCR_BRDV_DIV_1, SCR_BRDV_DIV_2, SCR_BRDV_DIV_4, + SCR_BRDV_DIV_8, SCR_BRDV_DIV_16, SCR_BRDV_DIV_32, }; static void sh_msiof_spi_set_clk_regs(struct sh_msiof_spi_priv *p, unsigned long parent_rate, u32 spi_hz) { - unsigned long div = 1024; + unsigned long div; u32 brps, scr; - size_t k; + unsigned int div_pow = p->min_div_pow; - if (!WARN_ON(!spi_hz || !parent_rate)) - div = DIV_ROUND_UP(parent_rate, spi_hz); - - div = max_t(unsigned long, div, p->min_div); + if (!spi_hz || !parent_rate) { + WARN(1, "Invalid clock rate parameters %lu and %u\n", + parent_rate, spi_hz); + return; + } - for (k = 0; k < ARRAY_SIZE(sh_msiof_spi_div_table); k++) { - brps = DIV_ROUND_UP(div, sh_msiof_spi_div_table[k].div); + div = DIV_ROUND_UP(parent_rate, spi_hz); + if (div <= 1024) { /* SCR_BRDV_DIV_1 is valid only if BRPS is x 1/1 or x 1/2 */ - if (sh_msiof_spi_div_table[k].div == 1 && brps > 2) - continue; - if (brps <= 32) /* max of brdv is 32 */ - break; - } + if (!div_pow && div <= 32 && div > 2) + div_pow = 1; + + if (div_pow) + brps = (div + 1) >> div_pow; + else + brps = div; - k = min_t(int, k, ARRAY_SIZE(sh_msiof_spi_div_table) - 1); - brps = min_t(int, brps, 32); + for (; brps > 32; div_pow++) + brps = (brps + 1) >> 1; + } else { + /* Set transfer rate composite divisor to 2^5 * 32 = 1024 */ + dev_err(&p->pdev->dev, + "Requested SPI transfer rate %d is too low\n", spi_hz); + div_pow = 5; + brps = 32; + } - scr = sh_msiof_spi_div_table[k].brdv | SCR_BRPS(brps); + scr = sh_msiof_spi_div_array[div_pow] | SCR_BRPS(brps); sh_msiof_write(p, TSCR, scr); if (!(p->master->flags & SPI_MASTER_MUST_TX)) sh_msiof_write(p, RSCR, scr); @@ -564,14 +567,16 @@ static int sh_msiof_spi_setup(struct spi_device *spi) /* Configure native chip select mode/polarity early */ clr = MDR1_SYNCMD_MASK; - set = MDR1_TRMD | TMDR1_PCON | MDR1_SYNCMD_SPI; + set = MDR1_SYNCMD_SPI; if (spi->mode & SPI_CS_HIGH) clr |= BIT(MDR1_SYNCAC_SHIFT); else set |= BIT(MDR1_SYNCAC_SHIFT); pm_runtime_get_sync(&p->pdev->dev); tmp = sh_msiof_read(p, TMDR1) & ~clr; - sh_msiof_write(p, TMDR1, tmp | set); + sh_msiof_write(p, TMDR1, tmp | set | MDR1_TRMD | TMDR1_PCON); + tmp = sh_msiof_read(p, RMDR1) & ~clr; + sh_msiof_write(p, RMDR1, tmp | set); pm_runtime_put(&p->pdev->dev); p->native_cs_high = spi->mode & SPI_CS_HIGH; p->native_cs_inited = true; @@ -1041,21 +1046,21 @@ static const struct sh_msiof_chipdata sh_data = { .tx_fifo_size = 64, .rx_fifo_size = 64, .master_flags = 0, - .min_div = 1, + .min_div_pow = 0, }; static const struct sh_msiof_chipdata rcar_gen2_data = { .tx_fifo_size = 64, .rx_fifo_size = 64, .master_flags = SPI_MASTER_MUST_TX, - .min_div = 1, + .min_div_pow = 0, }; static const struct sh_msiof_chipdata rcar_gen3_data = { .tx_fifo_size = 64, .rx_fifo_size = 64, .master_flags = SPI_MASTER_MUST_TX, - .min_div = 2, + .min_div_pow = 1, }; static const struct of_device_id sh_msiof_match[] = { @@ -1319,7 +1324,7 @@ static int sh_msiof_spi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, p); p->master = master; p->info = info; - p->min_div = chipdata->min_div; + p->min_div_pow = chipdata->min_div_pow; init_completion(&p->done); diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index ba9743fa2326d1..ad1e55d3d5d596 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -1129,7 +1129,7 @@ static int stm32_spi_probe(struct platform_device *pdev) if (!spi->clk_rate) { dev_err(&pdev->dev, "clk rate = 0\n"); ret = -EINVAL; - goto err_master_put; + goto err_clk_disable; } spi->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL); diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index c24d9b45a27cc5..5f19016bbf104b 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -36,6 +36,7 @@ #include <linux/sizes.h> #include <linux/spi/spi.h> +#include <linux/spi/spi-mem.h> struct ti_qspi_regs { u32 clkctrl; @@ -50,6 +51,7 @@ struct ti_qspi { struct spi_master *master; void __iomem *base; void __iomem *mmap_base; + size_t mmap_size; struct regmap *ctrl_base; unsigned int ctrl_reg; struct clk *fclk; @@ -434,12 +436,10 @@ static int ti_qspi_dma_xfer(struct ti_qspi *qspi, dma_addr_t dma_dst, return 0; } -static int ti_qspi_dma_bounce_buffer(struct ti_qspi *qspi, - struct spi_flash_read_message *msg) +static int ti_qspi_dma_bounce_buffer(struct ti_qspi *qspi, loff_t offs, + void *to, size_t readsize) { - size_t readsize = msg->len; - void *to = msg->buf; - dma_addr_t dma_src = qspi->mmap_phys_base + msg->from; + dma_addr_t dma_src = qspi->mmap_phys_base + offs; int ret = 0; /* @@ -507,13 +507,14 @@ static void ti_qspi_disable_memory_map(struct spi_device *spi) qspi->mmap_enabled = false; } -static void ti_qspi_setup_mmap_read(struct spi_device *spi, - struct spi_flash_read_message *msg) +static void ti_qspi_setup_mmap_read(struct spi_device *spi, u8 opcode, + u8 data_nbits, u8 addr_width, + u8 dummy_bytes) { struct ti_qspi *qspi = spi_master_get_devdata(spi->master); - u32 memval = msg->read_opcode; + u32 memval = opcode; - switch (msg->data_nbits) { + switch (data_nbits) { case SPI_NBITS_QUAD: memval |= QSPI_SETUP_RD_QUAD; break; @@ -524,48 +525,64 @@ static void ti_qspi_setup_mmap_read(struct spi_device *spi, memval |= QSPI_SETUP_RD_NORMAL; break; } - memval |= ((msg->addr_width - 1) << QSPI_SETUP_ADDR_SHIFT | - msg->dummy_bytes << QSPI_SETUP_DUMMY_SHIFT); + memval |= ((addr_width - 1) << QSPI_SETUP_ADDR_SHIFT | + dummy_bytes << QSPI_SETUP_DUMMY_SHIFT); ti_qspi_write(qspi, memval, QSPI_SPI_SETUP_REG(spi->chip_select)); } -static bool ti_qspi_spi_flash_can_dma(struct spi_device *spi, - struct spi_flash_read_message *msg) +static int ti_qspi_exec_mem_op(struct spi_mem *mem, + const struct spi_mem_op *op) { - return virt_addr_valid(msg->buf); -} - -static int ti_qspi_spi_flash_read(struct spi_device *spi, - struct spi_flash_read_message *msg) -{ - struct ti_qspi *qspi = spi_master_get_devdata(spi->master); + struct ti_qspi *qspi = spi_master_get_devdata(mem->spi->master); + u32 from = 0; int ret = 0; + /* Only optimize read path. */ + if (!op->data.nbytes || op->data.dir != SPI_MEM_DATA_IN || + !op->addr.nbytes || op->addr.nbytes > 4) + return -ENOTSUPP; + + /* Address exceeds MMIO window size, fall back to regular mode. */ + from = op->addr.val; + if (from + op->data.nbytes > qspi->mmap_size) + return -ENOTSUPP; + mutex_lock(&qspi->list_lock); if (!qspi->mmap_enabled) - ti_qspi_enable_memory_map(spi); - ti_qspi_setup_mmap_read(spi, msg); + ti_qspi_enable_memory_map(mem->spi); + ti_qspi_setup_mmap_read(mem->spi, op->cmd.opcode, op->data.buswidth, + op->addr.nbytes, op->dummy.nbytes); if (qspi->rx_chan) { - if (msg->cur_msg_mapped) - ret = ti_qspi_dma_xfer_sg(qspi, msg->rx_sg, msg->from); - else - ret = ti_qspi_dma_bounce_buffer(qspi, msg); - if (ret) - goto err_unlock; + struct sg_table sgt; + + if (virt_addr_valid(op->data.buf.in) && + !spi_controller_dma_map_mem_op_data(mem->spi->master, op, + &sgt)) { + ret = ti_qspi_dma_xfer_sg(qspi, sgt, from); + spi_controller_dma_unmap_mem_op_data(mem->spi->master, + op, &sgt); + } else { + ret = ti_qspi_dma_bounce_buffer(qspi, from, + op->data.buf.in, + op->data.nbytes); + } } else { - memcpy_fromio(msg->buf, qspi->mmap_base + msg->from, msg->len); + memcpy_fromio(op->data.buf.in, qspi->mmap_base + from, + op->data.nbytes); } - msg->retlen = msg->len; -err_unlock: mutex_unlock(&qspi->list_lock); return ret; } +static const struct spi_controller_mem_ops ti_qspi_mem_ops = { + .exec_op = ti_qspi_exec_mem_op, +}; + static int ti_qspi_start_transfer_one(struct spi_master *master, struct spi_message *m) { @@ -672,7 +689,7 @@ static int ti_qspi_probe(struct platform_device *pdev) master->dev.of_node = pdev->dev.of_node; master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) | SPI_BPW_MASK(8); - master->spi_flash_read = ti_qspi_spi_flash_read; + master->mem_ops = &ti_qspi_mem_ops; if (!of_property_read_u32(np, "num-cs", &num_cs)) master->num_chipselect = num_cs; @@ -702,6 +719,9 @@ static int ti_qspi_probe(struct platform_device *pdev) } } + if (res_mmap) + qspi->mmap_size = resource_size(res_mmap); + irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "no irq resource?\n"); @@ -770,7 +790,6 @@ static int ti_qspi_probe(struct platform_device *pdev) dma_release_channel(qspi->rx_chan); goto no_dma; } - master->spi_flash_can_dma = ti_qspi_spi_flash_can_dma; master->dma_rx = qspi->rx_chan; init_completion(&qspi->transfer_complete); if (res_mmap) @@ -784,7 +803,7 @@ no_dma: "mmap failed with error %ld using PIO mode\n", PTR_ERR(qspi->mmap_base)); qspi->mmap_base = NULL; - master->spi_flash_read = NULL; + master->mem_ops = NULL; } } qspi->mmap_enabled = false; diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c index 18aeaceee28620..cc4d3103349434 100644 --- a/drivers/spi/spi-zynqmp-gqspi.c +++ b/drivers/spi/spi-zynqmp-gqspi.c @@ -20,6 +20,7 @@ #include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/spi/spi.h> #include <linux/spinlock.h> #include <linux/workqueue.h> @@ -135,6 +136,7 @@ #define GQSPI_DMA_UNALIGN 0x3 #define GQSPI_DEFAULT_NUM_CS 1 /* Default number of chip selects */ +#define SPI_AUTOSUSPEND_TIMEOUT 3000 enum mode_type {GQSPI_MODE_IO, GQSPI_MODE_DMA}; /** @@ -356,21 +358,9 @@ static void zynqmp_qspi_copy_read_data(struct zynqmp_qspi *xqspi, static int zynqmp_prepare_transfer_hardware(struct spi_master *master) { struct zynqmp_qspi *xqspi = spi_master_get_devdata(master); - int ret; - - ret = clk_enable(xqspi->refclk); - if (ret) - return ret; - - ret = clk_enable(xqspi->pclk); - if (ret) - goto clk_err; zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, GQSPI_EN_MASK); return 0; -clk_err: - clk_disable(xqspi->refclk); - return ret; } /** @@ -387,8 +377,6 @@ static int zynqmp_unprepare_transfer_hardware(struct spi_master *master) struct zynqmp_qspi *xqspi = spi_master_get_devdata(master); zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0); - clk_disable(xqspi->refclk); - clk_disable(xqspi->pclk); return 0; } @@ -918,8 +906,7 @@ static int zynqmp_qspi_start_transfer(struct spi_master *master, */ static int __maybe_unused zynqmp_qspi_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct spi_master *master = platform_get_drvdata(pdev); + struct spi_master *master = dev_get_drvdata(dev); spi_master_suspend(master); @@ -939,8 +926,7 @@ static int __maybe_unused zynqmp_qspi_suspend(struct device *dev) */ static int __maybe_unused zynqmp_qspi_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct spi_master *master = platform_get_drvdata(pdev); + struct spi_master *master = dev_get_drvdata(dev); struct zynqmp_qspi *xqspi = spi_master_get_devdata(master); int ret = 0; @@ -959,11 +945,67 @@ static int __maybe_unused zynqmp_qspi_resume(struct device *dev) spi_master_resume(master); + clk_disable(xqspi->refclk); + clk_disable(xqspi->pclk); return 0; } -static SIMPLE_DEV_PM_OPS(zynqmp_qspi_dev_pm_ops, zynqmp_qspi_suspend, - zynqmp_qspi_resume); +/** + * zynqmp_runtime_suspend - Runtime suspend method for the SPI driver + * @dev: Address of the platform_device structure + * + * This function disables the clocks + * + * Return: Always 0 + */ +static int __maybe_unused zynqmp_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct spi_master *master = platform_get_drvdata(pdev); + struct zynqmp_qspi *xqspi = spi_master_get_devdata(master); + + clk_disable(xqspi->refclk); + clk_disable(xqspi->pclk); + + return 0; +} + +/** + * zynqmp_runtime_resume - Runtime resume method for the SPI driver + * @dev: Address of the platform_device structure + * + * This function enables the clocks + * + * Return: 0 on success and error value on error + */ +static int __maybe_unused zynqmp_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct spi_master *master = platform_get_drvdata(pdev); + struct zynqmp_qspi *xqspi = spi_master_get_devdata(master); + int ret; + + ret = clk_enable(xqspi->pclk); + if (ret) { + dev_err(dev, "Cannot enable APB clock.\n"); + return ret; + } + + ret = clk_enable(xqspi->refclk); + if (ret) { + dev_err(dev, "Cannot enable device clock.\n"); + clk_disable(xqspi->pclk); + return ret; + } + + return 0; +} + +static const struct dev_pm_ops zynqmp_qspi_dev_pm_ops = { + SET_RUNTIME_PM_OPS(zynqmp_runtime_suspend, + zynqmp_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(zynqmp_qspi_suspend, zynqmp_qspi_resume) +}; /** * zynqmp_qspi_probe: Probe method for the QSPI driver @@ -1023,9 +1065,15 @@ static int zynqmp_qspi_probe(struct platform_device *pdev) goto clk_dis_pclk; } + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); /* QSPI controller initializations */ zynqmp_qspi_init_hw(xqspi); + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); xqspi->irq = platform_get_irq(pdev, 0); if (xqspi->irq <= 0) { ret = -ENXIO; @@ -1063,6 +1111,8 @@ static int zynqmp_qspi_probe(struct platform_device *pdev) return 0; clk_dis_all: + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_disable(&pdev->dev); clk_disable_unprepare(xqspi->refclk); clk_dis_pclk: clk_disable_unprepare(xqspi->pclk); @@ -1090,6 +1140,8 @@ static int zynqmp_qspi_remove(struct platform_device *pdev) zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0); clk_disable_unprepare(xqspi->refclk); clk_disable_unprepare(xqspi->pclk); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_disable(&pdev->dev); spi_unregister_master(master); diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 7b213faa0a2b72..20b5b2754830ec 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -28,6 +28,7 @@ #include <linux/slab.h> #include <linux/mod_devicetable.h> #include <linux/spi/spi.h> +#include <linux/spi/spi-mem.h> #include <linux/of_gpio.h> #include <linux/pm_runtime.h> #include <linux/pm_domain.h> @@ -46,6 +47,8 @@ #define CREATE_TRACE_POINTS #include <trace/events/spi.h> +#include "internals.h" + static DEFINE_IDR(spi_master_idr); static void spidev_release(struct device *dev) @@ -740,9 +743,9 @@ static void spi_set_cs(struct spi_device *spi, bool enable) } #ifdef CONFIG_HAS_DMA -static int spi_map_buf(struct spi_controller *ctlr, struct device *dev, - struct sg_table *sgt, void *buf, size_t len, - enum dma_data_direction dir) +int spi_map_buf(struct spi_controller *ctlr, struct device *dev, + struct sg_table *sgt, void *buf, size_t len, + enum dma_data_direction dir) { const bool vmalloced_buf = is_vmalloc_addr(buf); unsigned int max_seg_size = dma_get_max_seg_size(dev); @@ -821,8 +824,8 @@ static int spi_map_buf(struct spi_controller *ctlr, struct device *dev, return 0; } -static void spi_unmap_buf(struct spi_controller *ctlr, struct device *dev, - struct sg_table *sgt, enum dma_data_direction dir) +void spi_unmap_buf(struct spi_controller *ctlr, struct device *dev, + struct sg_table *sgt, enum dma_data_direction dir) { if (sgt->orig_nents) { dma_unmap_sg(dev, sgt->sgl, sgt->orig_nents, dir); @@ -907,19 +910,6 @@ static int __spi_unmap_msg(struct spi_controller *ctlr, struct spi_message *msg) return 0; } #else /* !CONFIG_HAS_DMA */ -static inline int spi_map_buf(struct spi_controller *ctlr, struct device *dev, - struct sg_table *sgt, void *buf, size_t len, - enum dma_data_direction dir) -{ - return -EINVAL; -} - -static inline void spi_unmap_buf(struct spi_controller *ctlr, - struct device *dev, struct sg_table *sgt, - enum dma_data_direction dir) -{ -} - static inline int __spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg) { @@ -1222,6 +1212,7 @@ static void __spi_pump_messages(struct spi_controller *ctlr, bool in_kthread) if (!was_busy && ctlr->auto_runtime_pm) { ret = pm_runtime_get_sync(ctlr->dev.parent); if (ret < 0) { + pm_runtime_put_noidle(ctlr->dev.parent); dev_err(&ctlr->dev, "Failed to power device: %d\n", ret); mutex_unlock(&ctlr->io_mutex); @@ -1533,6 +1524,22 @@ err_init_queue: return ret; } +/** + * spi_flush_queue - Send all pending messages in the queue from the callers' + * context + * @ctlr: controller to process queue for + * + * This should be used when one wants to ensure all pending messages have been + * sent before doing something. Is used by the spi-mem code to make sure SPI + * memory operations do not preempt regular SPI transfers that have been queued + * before the spi-mem operation. + */ +void spi_flush_queue(struct spi_controller *ctlr) +{ + if (ctlr->transfer == spi_queued_transfer) + __spi_pump_messages(ctlr, false); +} + /*-------------------------------------------------------------------------*/ #if defined(CONFIG_OF) @@ -2063,6 +2070,26 @@ static int of_spi_register_master(struct spi_controller *ctlr) } #endif +static int spi_controller_check_ops(struct spi_controller *ctlr) +{ + /* + * The controller may implement only the high-level SPI-memory like + * operations if it does not support regular SPI transfers, and this is + * valid use case. + * If ->mem_ops is NULL, we request that at least one of the + * ->transfer_xxx() method be implemented. + */ + if (ctlr->mem_ops) { + if (!ctlr->mem_ops->exec_op) + return -EINVAL; + } else if (!ctlr->transfer && !ctlr->transfer_one && + !ctlr->transfer_one_message) { + return -EINVAL; + } + + return 0; +} + /** * spi_register_controller - register SPI master or slave controller * @ctlr: initialized master, originally from spi_alloc_master() or @@ -2096,6 +2123,14 @@ int spi_register_controller(struct spi_controller *ctlr) if (!dev) return -ENODEV; + /* + * Make sure all necessary hooks are implemented before registering + * the SPI controller. + */ + status = spi_controller_check_ops(ctlr); + if (status) + return status; + if (!spi_controller_is_slave(ctlr)) { status = of_spi_register_master(ctlr); if (status) @@ -2161,10 +2196,14 @@ int spi_register_controller(struct spi_controller *ctlr) spi_controller_is_slave(ctlr) ? "slave" : "master", dev_name(&ctlr->dev)); - /* If we're using a queued driver, start the queue */ - if (ctlr->transfer) + /* + * If we're using a queued driver, start the queue. Note that we don't + * need the queueing logic if the driver is only supporting high-level + * memory operations. + */ + if (ctlr->transfer) { dev_info(dev, "controller is unqueued, this is deprecated\n"); - else { + } else if (ctlr->transfer_one || ctlr->transfer_one_message) { status = spi_controller_initialize_queue(ctlr); if (status) { device_del(&ctlr->dev); @@ -2894,6 +2933,13 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message) { struct spi_controller *ctlr = spi->controller; + /* + * Some controllers do not support doing regular SPI transfers. Return + * ENOTSUPP when this is the case. + */ + if (!ctlr->transfer) + return -ENOTSUPP; + message->spi = spi; SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics, spi_async); @@ -3010,63 +3056,6 @@ int spi_async_locked(struct spi_device *spi, struct spi_message *message) } EXPORT_SYMBOL_GPL(spi_async_locked); - -int spi_flash_read(struct spi_device *spi, - struct spi_flash_read_message *msg) - -{ - struct spi_controller *master = spi->controller; - struct device *rx_dev = NULL; - int ret; - - if ((msg->opcode_nbits == SPI_NBITS_DUAL || - msg->addr_nbits == SPI_NBITS_DUAL) && - !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD))) - return -EINVAL; - if ((msg->opcode_nbits == SPI_NBITS_QUAD || - msg->addr_nbits == SPI_NBITS_QUAD) && - !(spi->mode & SPI_TX_QUAD)) - return -EINVAL; - if (msg->data_nbits == SPI_NBITS_DUAL && - !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD))) - return -EINVAL; - if (msg->data_nbits == SPI_NBITS_QUAD && - !(spi->mode & SPI_RX_QUAD)) - return -EINVAL; - - if (master->auto_runtime_pm) { - ret = pm_runtime_get_sync(master->dev.parent); - if (ret < 0) { - dev_err(&master->dev, "Failed to power device: %d\n", - ret); - return ret; - } - } - - mutex_lock(&master->bus_lock_mutex); - mutex_lock(&master->io_mutex); - if (master->dma_rx && master->spi_flash_can_dma(spi, msg)) { - rx_dev = master->dma_rx->device->dev; - ret = spi_map_buf(master, rx_dev, &msg->rx_sg, - msg->buf, msg->len, - DMA_FROM_DEVICE); - if (!ret) - msg->cur_msg_mapped = true; - } - ret = master->spi_flash_read(spi, msg); - if (msg->cur_msg_mapped) - spi_unmap_buf(master, rx_dev, &msg->rx_sg, - DMA_FROM_DEVICE); - mutex_unlock(&master->io_mutex); - mutex_unlock(&master->bus_lock_mutex); - - if (master->auto_runtime_pm) - pm_runtime_put(master->dev.parent); - - return ret; -} -EXPORT_SYMBOL_GPL(spi_flash_read); - /*-------------------------------------------------------------------------*/ /* Utility methods for SPI protocol drivers, layered on diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h new file mode 100644 index 00000000000000..bb4bd15ae1f637 --- /dev/null +++ b/include/linux/spi/spi-mem.h @@ -0,0 +1,249 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Exceet Electronics GmbH + * Copyright (C) 2018 Bootlin + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#ifndef __LINUX_SPI_MEM_H +#define __LINUX_SPI_MEM_H + +#include <linux/spi/spi.h> + +#define SPI_MEM_OP_CMD(__opcode, __buswidth) \ + { \ + .buswidth = __buswidth, \ + .opcode = __opcode, \ + } + +#define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth) \ + { \ + .nbytes = __nbytes, \ + .val = __val, \ + .buswidth = __buswidth, \ + } + +#define SPI_MEM_OP_NO_ADDR { } + +#define SPI_MEM_OP_DUMMY(__nbytes, __buswidth) \ + { \ + .nbytes = __nbytes, \ + .buswidth = __buswidth, \ + } + +#define SPI_MEM_OP_NO_DUMMY { } + +#define SPI_MEM_OP_DATA_IN(__nbytes, __buf, __buswidth) \ + { \ + .dir = SPI_MEM_DATA_IN, \ + .nbytes = __nbytes, \ + .buf.in = __buf, \ + .buswidth = __buswidth, \ + } + +#define SPI_MEM_OP_DATA_OUT(__nbytes, __buf, __buswidth) \ + { \ + .dir = SPI_MEM_DATA_OUT, \ + .nbytes = __nbytes, \ + .buf.out = __buf, \ + .buswidth = __buswidth, \ + } + +#define SPI_MEM_OP_NO_DATA { } + +/** + * enum spi_mem_data_dir - describes the direction of a SPI memory data + * transfer from the controller perspective + * @SPI_MEM_DATA_IN: data coming from the SPI memory + * @SPI_MEM_DATA_OUT: data sent the SPI memory + */ +enum spi_mem_data_dir { + SPI_MEM_DATA_IN, + SPI_MEM_DATA_OUT, +}; + +/** + * struct spi_mem_op - describes a SPI memory operation + * @cmd.buswidth: number of IO lines used to transmit the command + * @cmd.opcode: operation opcode + * @addr.nbytes: number of address bytes to send. Can be zero if the operation + * does not need to send an address + * @addr.buswidth: number of IO lines used to transmit the address cycles + * @addr.val: address value. This value is always sent MSB first on the bus. + * Note that only @addr.nbytes are taken into account in this + * address value, so users should make sure the value fits in the + * assigned number of bytes. + * @dummy.nbytes: number of dummy bytes to send after an opcode or address. Can + * be zero if the operation does not require dummy bytes + * @dummy.buswidth: number of IO lanes used to transmit the dummy bytes + * @data.buswidth: number of IO lanes used to send/receive the data + * @data.dir: direction of the transfer + * @data.buf.in: input buffer + * @data.buf.out: output buffer + */ +struct spi_mem_op { + struct { + u8 buswidth; + u8 opcode; + } cmd; + + struct { + u8 nbytes; + u8 buswidth; + u64 val; + } addr; + + struct { + u8 nbytes; + u8 buswidth; + } dummy; + + struct { + u8 buswidth; + enum spi_mem_data_dir dir; + unsigned int nbytes; + /* buf.{in,out} must be DMA-able. */ + union { + void *in; + const void *out; + } buf; + } data; +}; + +#define SPI_MEM_OP(__cmd, __addr, __dummy, __data) \ + { \ + .cmd = __cmd, \ + .addr = __addr, \ + .dummy = __dummy, \ + .data = __data, \ + } + +/** + * struct spi_mem - describes a SPI memory device + * @spi: the underlying SPI device + * @drvpriv: spi_mem_drviver private data + * + * Extra information that describe the SPI memory device and may be needed by + * the controller to properly handle this device should be placed here. + * + * One example would be the device size since some controller expose their SPI + * mem devices through a io-mapped region. + */ +struct spi_mem { + struct spi_device *spi; + void *drvpriv; +}; + +/** + * struct spi_mem_set_drvdata() - attach driver private data to a SPI mem + * device + * @mem: memory device + * @data: data to attach to the memory device + */ +static inline void spi_mem_set_drvdata(struct spi_mem *mem, void *data) +{ + mem->drvpriv = data; +} + +/** + * struct spi_mem_get_drvdata() - get driver private data attached to a SPI mem + * device + * @mem: memory device + * + * Return: the data attached to the mem device. + */ +static inline void *spi_mem_get_drvdata(struct spi_mem *mem) +{ + return mem->drvpriv; +} + +/** + * struct spi_controller_mem_ops - SPI memory operations + * @adjust_op_size: shrink the data xfer of an operation to match controller's + * limitations (can be alignment of max RX/TX size + * limitations) + * @supports_op: check if an operation is supported by the controller + * @exec_op: execute a SPI memory operation + * + * This interface should be implemented by SPI controllers providing an + * high-level interface to execute SPI memory operation, which is usually the + * case for QSPI controllers. + */ +struct spi_controller_mem_ops { + int (*adjust_op_size)(struct spi_mem *mem, struct spi_mem_op *op); + bool (*supports_op)(struct spi_mem *mem, + const struct spi_mem_op *op); + int (*exec_op)(struct spi_mem *mem, + const struct spi_mem_op *op); +}; + +/** + * struct spi_mem_driver - SPI memory driver + * @spidrv: inherit from a SPI driver + * @probe: probe a SPI memory. Usually where detection/initialization takes + * place + * @remove: remove a SPI memory + * @shutdown: take appropriate action when the system is shutdown + * + * This is just a thin wrapper around a spi_driver. The core takes care of + * allocating the spi_mem object and forwarding the probe/remove/shutdown + * request to the spi_mem_driver. The reason we use this wrapper is because + * we might have to stuff more information into the spi_mem struct to let + * SPI controllers know more about the SPI memory they interact with, and + * having this intermediate layer allows us to do that without adding more + * useless fields to the spi_device object. + */ +struct spi_mem_driver { + struct spi_driver spidrv; + int (*probe)(struct spi_mem *mem); + int (*remove)(struct spi_mem *mem); + void (*shutdown)(struct spi_mem *mem); +}; + +#if IS_ENABLED(CONFIG_SPI_MEM) +int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr, + const struct spi_mem_op *op, + struct sg_table *sg); + +void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr, + const struct spi_mem_op *op, + struct sg_table *sg); +#else +static inline int +spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr, + const struct spi_mem_op *op, + struct sg_table *sg) +{ + return -ENOTSUPP; +} + +static inline void +spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr, + const struct spi_mem_op *op, + struct sg_table *sg) +{ +} +#endif /* CONFIG_SPI_MEM */ + +int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op); + +bool spi_mem_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op); + +int spi_mem_exec_op(struct spi_mem *mem, + const struct spi_mem_op *op); + +int spi_mem_driver_register_with_owner(struct spi_mem_driver *drv, + struct module *owner); + +void spi_mem_driver_unregister(struct spi_mem_driver *drv); + +#define spi_mem_driver_register(__drv) \ + spi_mem_driver_register_with_owner(__drv, THIS_MODULE) + +#define module_spi_mem_driver(__drv) \ + module_driver(__drv, spi_mem_driver_register, \ + spi_mem_driver_unregister) + +#endif /* __LINUX_SPI_MEM_H */ diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index bc6bb325d1bf7c..a64235e053216b 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -26,7 +26,7 @@ struct dma_chan; struct property_entry; struct spi_controller; struct spi_transfer; -struct spi_flash_read_message; +struct spi_controller_mem_ops; /* * INTERFACES between SPI master-side drivers and SPI slave protocol handlers, @@ -376,13 +376,11 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * transfer_one callback. * @handle_err: the subsystem calls the driver to handle an error that occurs * in the generic implementation of transfer_one_message(). + * @mem_ops: optimized/dedicated operations for interactions with SPI memory. + * This field is optional and should only be implemented if the + * controller has native support for memory like operations. * @unprepare_message: undo any work done by prepare_message(). * @slave_abort: abort the ongoing transfer request on an SPI slave controller - * @spi_flash_read: to support spi-controller hardwares that provide - * accelerated interface to read from flash devices. - * @spi_flash_can_dma: analogous to can_dma() interface, but for - * controllers implementing spi_flash_read. - * @flash_read_supported: spi device supports flash read * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS * number. Any individual value may be -ENOENT for CS lines that * are not GPIOs (driven by the SPI controller itself). @@ -548,11 +546,6 @@ struct spi_controller { int (*unprepare_message)(struct spi_controller *ctlr, struct spi_message *message); int (*slave_abort)(struct spi_controller *ctlr); - int (*spi_flash_read)(struct spi_device *spi, - struct spi_flash_read_message *msg); - bool (*spi_flash_can_dma)(struct spi_device *spi, - struct spi_flash_read_message *msg); - bool (*flash_read_supported)(struct spi_device *spi); /* * These hooks are for drivers that use a generic implementation @@ -564,6 +557,9 @@ struct spi_controller { void (*handle_err)(struct spi_controller *ctlr, struct spi_message *message); + /* Optimized handlers for SPI memory-like operations. */ + const struct spi_controller_mem_ops *mem_ops; + /* gpio chip select */ int *cs_gpios; @@ -1183,48 +1179,6 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd) return be16_to_cpu(result); } -/** - * struct spi_flash_read_message - flash specific information for - * spi-masters that provide accelerated flash read interfaces - * @buf: buffer to read data - * @from: offset within the flash from where data is to be read - * @len: length of data to be read - * @retlen: actual length of data read - * @read_opcode: read_opcode to be used to communicate with flash - * @addr_width: number of address bytes - * @dummy_bytes: number of dummy bytes - * @opcode_nbits: number of lines to send opcode - * @addr_nbits: number of lines to send address - * @data_nbits: number of lines for data - * @rx_sg: Scatterlist for receive data read from flash - * @cur_msg_mapped: message has been mapped for DMA - */ -struct spi_flash_read_message { - void *buf; - loff_t from; - size_t len; - size_t retlen; - u8 read_opcode; - u8 addr_width; - u8 dummy_bytes; - u8 opcode_nbits; - u8 addr_nbits; - u8 data_nbits; - struct sg_table rx_sg; - bool cur_msg_mapped; -}; - -/* SPI core interface for flash read support */ -static inline bool spi_flash_read_supported(struct spi_device *spi) -{ - return spi->controller->spi_flash_read && - (!spi->controller->flash_read_supported || - spi->controller->flash_read_supported(spi)); -} - -int spi_flash_read(struct spi_device *spi, - struct spi_flash_read_message *msg); - /*---------------------------------------------------------------------------*/ /* |