Merge tag 'gpio-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "Some GPIO fixes I've collected with the help of Bartosz.

  Nothing special about them: all are driver and kbuild fixes + some
  documentation fixes:

   - Tidy up a missed function call in the designware driver when
     converting to gpiolib irqchip

   - Fix some bitmasks in the Aspeed driver

   - Fix some kerneldoc warnings and minor bugs in the improved
     userspace API documentation

   - Revert the revert of the OMAP fix for lost edge wakeup interrupts:
     the fix needs to stay in

   - Fix a compile error when deselecting the character device

   - A bunch of IRQ fixes on the idio GPIO drivers

   - Fix an off-by-one error in the SiFive GPIO driver"

* tag 'gpio-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: sifive: Fix SiFive gpio probe
  gpio: pcie-idio-24: Enable PEX8311 interrupts
  gpio: pcie-idio-24: Fix IRQ Enable Register value
  gpio: pcie-idio-24: Fix irq mask when masking
  gpiolib: fix sysfs when cdev is not selected
  Revert "Revert "gpio: omap: Fix lost edge wake-up interrupts""
  gpio: uapi: clarify the meaning of 'empty' char arrays
  gpio: uapi: remove whitespace
  gpio: uapi: kernel-doc formatting improvements
  gpio: uapi: comment consistency
  gpio: uapi: fix kernel-doc warnings
  gpio: aspeed: fix ast2600 bank properties
  gpio: dwapb: Fix missing conversion to GPIO-lib-based IRQ-chip

8 files changed, 140 insertions, 80 deletions

diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index e44d5de2a1201a..b966f5e28ebffd 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -1114,6 +1114,7 @@ static const struct aspeed_gpio_config ast2500_config =
 
 static const struct aspeed_bank_props ast2600_bank_props[] = {
 	/*     input	  output   */
+	{4, 0xffffffff,  0x00ffffff}, /* Q/R/S/T */
 	{5, 0xffffffff,  0xffffff00}, /* U/V/W/X */
 	{6, 0x0000ffff,  0x0000ffff}, /* Y/Z */
 	{ },
diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index a5b326754124de..2a9046c0fb1654 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -343,8 +343,8 @@ static int dwapb_irq_set_type(struct irq_data *d, u32 type)
 #ifdef CONFIG_PM_SLEEP
 static int dwapb_irq_set_wake(struct irq_data *d, unsigned int enable)
 {
-	struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d);
-	struct dwapb_gpio *gpio = igc->private;
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct dwapb_gpio *gpio = to_dwapb_gpio(gc);
 	struct dwapb_context *ctx = gpio->ports[0].ctx;
 	irq_hw_number_t bit = irqd_to_hwirq(d);
 
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 6d59e3a4376116..f7ceb2b11afc55 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1114,13 +1114,23 @@ static void omap_gpio_idle(struct gpio_bank *bank, bool may_lose_context)
 {
 	struct device *dev = bank->chip.parent;
 	void __iomem *base = bank->base;
-	u32 nowake;
+	u32 mask, nowake;
 
 	bank->saved_datain = readl_relaxed(base + bank->regs->datain);
 
 	if (!bank->enabled_non_wakeup_gpios)
 		goto update_gpio_context_count;
 
+	/* Check for pending EDGE_FALLING, ignore EDGE_BOTH */
+	mask = bank->enabled_non_wakeup_gpios & bank->context.fallingdetect;
+	mask &= ~bank->context.risingdetect;
+	bank->saved_datain |= mask;
+
+	/* Check for pending EDGE_RISING, ignore EDGE_BOTH */
+	mask = bank->enabled_non_wakeup_gpios & bank->context.risingdetect;
+	mask &= ~bank->context.fallingdetect;
+	bank->saved_datain &= ~mask;
+
 	if (!may_lose_context)
 		goto update_gpio_context_count;
 
diff --git a/drivers/gpio/gpio-pcie-idio-24.c b/drivers/gpio/gpio-pcie-idio-24.c
index a68941d19ac608..2a07fd96707eed 100644
--- a/drivers/gpio/gpio-pcie-idio-24.c
+++ b/drivers/gpio/gpio-pcie-idio-24.c
@@ -28,6 +28,47 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
+/*
+ * PLX PEX8311 PCI LCS_INTCSR Interrupt Control/Status
+ *
+ * Bit: Description
+ *   0: Enable Interrupt Sources (Bit 0)
+ *   1: Enable Interrupt Sources (Bit 1)
+ *   2: Generate Internal PCI Bus Internal SERR# Interrupt
+ *   3: Mailbox Interrupt Enable
+ *   4: Power Management Interrupt Enable
+ *   5: Power Management Interrupt
+ *   6: Slave Read Local Data Parity Check Error Enable
+ *   7: Slave Read Local Data Parity Check Error Status
+ *   8: Internal PCI Wire Interrupt Enable
+ *   9: PCI Express Doorbell Interrupt Enable
+ *  10: PCI Abort Interrupt Enable
+ *  11: Local Interrupt Input Enable
+ *  12: Retry Abort Enable
+ *  13: PCI Express Doorbell Interrupt Active
+ *  14: PCI Abort Interrupt Active
+ *  15: Local Interrupt Input Active
+ *  16: Local Interrupt Output Enable
+ *  17: Local Doorbell Interrupt Enable
+ *  18: DMA Channel 0 Interrupt Enable
+ *  19: DMA Channel 1 Interrupt Enable
+ *  20: Local Doorbell Interrupt Active
+ *  21: DMA Channel 0 Interrupt Active
+ *  22: DMA Channel 1 Interrupt Active
+ *  23: Built-In Self-Test (BIST) Interrupt Active
+ *  24: Direct Master was the Bus Master during a Master or Target Abort
+ *  25: DMA Channel 0 was the Bus Master during a Master or Target Abort
+ *  26: DMA Channel 1 was the Bus Master during a Master or Target Abort
+ *  27: Target Abort after internal 256 consecutive Master Retrys
+ *  28: PCI Bus wrote data to LCS_MBOX0
+ *  29: PCI Bus wrote data to LCS_MBOX1
+ *  30: PCI Bus wrote data to LCS_MBOX2
+ *  31: PCI Bus wrote data to LCS_MBOX3
+ */
+#define PLX_PEX8311_PCI_LCS_INTCSR  0x68
+#define INTCSR_INTERNAL_PCI_WIRE    BIT(8)
+#define INTCSR_LOCAL_INPUT          BIT(11)
+
 /**
  * struct idio_24_gpio_reg - GPIO device registers structure
  * @out0_7:	Read: FET Outputs 0-7
@@ -92,6 +133,7 @@ struct idio_24_gpio_reg {
 struct idio_24_gpio {
 	struct gpio_chip chip;
 	raw_spinlock_t lock;
+	__u8 __iomem *plx;
 	struct idio_24_gpio_reg __iomem *reg;
 	unsigned long irq_mask;
 };
@@ -334,13 +376,13 @@ static void idio_24_irq_mask(struct irq_data *data)
 	unsigned long flags;
 	const unsigned long bit_offset = irqd_to_hwirq(data) - 24;
 	unsigned char new_irq_mask;
-	const unsigned long bank_offset = bit_offset/8 * 8;
+	const unsigned long bank_offset = bit_offset / 8;
 	unsigned char cos_enable_state;
 
 	raw_spin_lock_irqsave(&idio24gpio->lock, flags);
 
-	idio24gpio->irq_mask &= BIT(bit_offset);
-	new_irq_mask = idio24gpio->irq_mask >> bank_offset;
+	idio24gpio->irq_mask &= ~BIT(bit_offset);
+	new_irq_mask = idio24gpio->irq_mask >> bank_offset * 8;
 
 	if (!new_irq_mask) {
 		cos_enable_state = ioread8(&idio24gpio->reg->cos_enable);
@@ -363,12 +405,12 @@ static void idio_24_irq_unmask(struct irq_data *data)
 	unsigned long flags;
 	unsigned char prev_irq_mask;
 	const unsigned long bit_offset = irqd_to_hwirq(data) - 24;
-	const unsigned long bank_offset = bit_offset/8 * 8;
+	const unsigned long bank_offset = bit_offset / 8;
 	unsigned char cos_enable_state;
 
 	raw_spin_lock_irqsave(&idio24gpio->lock, flags);
 
-	prev_irq_mask = idio24gpio->irq_mask >> bank_offset;
+	prev_irq_mask = idio24gpio->irq_mask >> bank_offset * 8;
 	idio24gpio->irq_mask |= BIT(bit_offset);
 
 	if (!prev_irq_mask) {
@@ -455,6 +497,7 @@ static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct device *const dev = &pdev->dev;
 	struct idio_24_gpio *idio24gpio;
 	int err;
+	const size_t pci_plx_bar_index = 1;
 	const size_t pci_bar_index = 2;
 	const char *const name = pci_name(pdev);
 	struct gpio_irq_chip *girq;
@@ -469,12 +512,13 @@ static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		return err;
 	}
 
-	err = pcim_iomap_regions(pdev, BIT(pci_bar_index), name);
+	err = pcim_iomap_regions(pdev, BIT(pci_plx_bar_index) | BIT(pci_bar_index), name);
 	if (err) {
 		dev_err(dev, "Unable to map PCI I/O addresses (%d)\n", err);
 		return err;
 	}
 
+	idio24gpio->plx = pcim_iomap_table(pdev)[pci_plx_bar_index];
 	idio24gpio->reg = pcim_iomap_table(pdev)[pci_bar_index];
 
 	idio24gpio->chip.label = name;
@@ -504,6 +548,12 @@ static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Software board reset */
 	iowrite8(0, &idio24gpio->reg->soft_reset);
+	/*
+	 * enable PLX PEX8311 internal PCI wire interrupt and local interrupt
+	 * input
+	 */
+	iowrite8((INTCSR_INTERNAL_PCI_WIRE | INTCSR_LOCAL_INPUT) >> 8,
+		 idio24gpio->plx + PLX_PEX8311_PCI_LCS_INTCSR + 1);
 
 	err = devm_gpiochip_add_data(dev, &idio24gpio->chip, idio24gpio);
 	if (err) {
diff --git a/drivers/gpio/gpio-sifive.c b/drivers/gpio/gpio-sifive.c
index c54dd08f2cbfd3..d5eb9ca119016c 100644
--- a/drivers/gpio/gpio-sifive.c
+++ b/drivers/gpio/gpio-sifive.c
@@ -183,7 +183,7 @@ static int sifive_gpio_probe(struct platform_device *pdev)
 		return PTR_ERR(chip->regs);
 
 	ngpio = of_irq_count(node);
-	if (ngpio >= SIFIVE_GPIO_MAX) {
+	if (ngpio > SIFIVE_GPIO_MAX) {
 		dev_err(dev, "Too many GPIO interrupts (max=%d)\n",
 			SIFIVE_GPIO_MAX);
 		return -ENXIO;
diff --git a/drivers/gpio/gpiolib-cdev.h b/drivers/gpio/gpiolib-cdev.h
index cb41dd75733806..b42644cbffb80e 100644
--- a/drivers/gpio/gpiolib-cdev.h
+++ b/drivers/gpio/gpiolib-cdev.h
@@ -7,22 +7,7 @@
 
 struct gpio_device;
 
-#ifdef CONFIG_GPIO_CDEV
-
 int gpiolib_cdev_register(struct gpio_device *gdev, dev_t devt);
 void gpiolib_cdev_unregister(struct gpio_device *gdev);
 
-#else
-
-static inline int gpiolib_cdev_register(struct gpio_device *gdev, dev_t devt)
-{
-	return 0;
-}
-
-static inline void gpiolib_cdev_unregister(struct gpio_device *gdev)
-{
-}
-
-#endif /* CONFIG_GPIO_CDEV */
-
 #endif /* GPIOLIB_CDEV_H */
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 3cdf9effc13a5f..089ddcaa9bc64a 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -480,11 +480,23 @@ static void gpiodevice_release(struct device *dev)
 	kfree(gdev);
 }
 
+#ifdef CONFIG_GPIO_CDEV
+#define gcdev_register(gdev, devt)	gpiolib_cdev_register((gdev), (devt))
+#define gcdev_unregister(gdev)		gpiolib_cdev_unregister((gdev))
+#else
+/*
+ * gpiolib_cdev_register() indirectly calls device_add(), which is still
+ * required even when cdev is not selected.
+ */
+#define gcdev_register(gdev, devt)	device_add(&(gdev)->dev)
+#define gcdev_unregister(gdev)		device_del(&(gdev)->dev)
+#endif
+
 static int gpiochip_setup_dev(struct gpio_device *gdev)
 {
 	int ret;
 
-	ret = gpiolib_cdev_register(gdev, gpio_devt);
+	ret = gcdev_register(gdev, gpio_devt);
 	if (ret)
 		return ret;
 
@@ -500,7 +512,7 @@ static int gpiochip_setup_dev(struct gpio_device *gdev)
 	return 0;
 
 err_remove_device:
-	gpiolib_cdev_unregister(gdev);
+	gcdev_unregister(gdev);
 	return ret;
 }
 
@@ -825,7 +837,7 @@ void gpiochip_remove(struct gpio_chip *gc)
 	 * be removed, else it will be dangling until the last user is
 	 * gone.
 	 */
-	gpiolib_cdev_unregister(gdev);
+	gcdev_unregister(gdev);
 	put_device(&gdev->dev);
 }
 EXPORT_SYMBOL_GPL(gpiochip_remove);
diff --git a/include/uapi/linux/gpio.h b/include/uapi/linux/gpio.h
index 07865c60109949..2072c260f5d08d 100644
--- a/include/uapi/linux/gpio.h
+++ b/include/uapi/linux/gpio.h
@@ -26,7 +26,7 @@
  * struct gpiochip_info - Information about a certain GPIO chip
  * @name: the Linux kernel name of this GPIO chip
  * @label: a functional name for this GPIO chip, such as a product
- * number, may be empty
+ * number, may be empty (i.e. label[0] == '\0')
  * @lines: number of GPIO lines on this chip
  */
 struct gpiochip_info {
@@ -98,7 +98,7 @@ struct gpio_v2_line_values {
  * identifying which field of the attribute union is in use.
  * @GPIO_V2_LINE_ATTR_ID_FLAGS: flags field is in use
  * @GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES: values field is in use
- * @GPIO_V2_LINE_ATTR_ID_DEBOUNCE: debounce_period_us is in use
+ * @GPIO_V2_LINE_ATTR_ID_DEBOUNCE: debounce_period_us field is in use
  */
 enum gpio_v2_line_attr_id {
 	GPIO_V2_LINE_ATTR_ID_FLAGS		= 1,
@@ -110,17 +110,17 @@ enum gpio_v2_line_attr_id {
  * struct gpio_v2_line_attribute - a configurable attribute of a line
  * @id: attribute identifier with value from &enum gpio_v2_line_attr_id
  * @padding: reserved for future use and must be zero filled
- * @flags: if id is GPIO_V2_LINE_ATTR_ID_FLAGS, the flags for the GPIO
- * line, with values from enum gpio_v2_line_flag, such as
- * GPIO_V2_LINE_FLAG_ACTIVE_LOW, GPIO_V2_LINE_FLAG_OUTPUT etc, OR:ed
+ * @flags: if id is %GPIO_V2_LINE_ATTR_ID_FLAGS, the flags for the GPIO
+ * line, with values from &enum gpio_v2_line_flag, such as
+ * %GPIO_V2_LINE_FLAG_ACTIVE_LOW, %GPIO_V2_LINE_FLAG_OUTPUT etc, added
  * together.  This overrides the default flags contained in the &struct
  * gpio_v2_line_config for the associated line.
- * @values: if id is GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES, a bitmap
+ * @values: if id is %GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES, a bitmap
  * containing the values to which the lines will be set, with each bit
  * number corresponding to the index into &struct
  * gpio_v2_line_request.offsets.
- * @debounce_period_us: if id is GPIO_V2_LINE_ATTR_ID_DEBOUNCE, the desired
- * debounce period, in microseconds
+ * @debounce_period_us: if id is %GPIO_V2_LINE_ATTR_ID_DEBOUNCE, the
+ * desired debounce period, in microseconds
  */
 struct gpio_v2_line_attribute {
 	__u32 id;
@@ -147,12 +147,12 @@ struct gpio_v2_line_config_attribute {
 
 /**
  * struct gpio_v2_line_config - Configuration for GPIO lines
- * @flags: flags for the GPIO lines, with values from enum
- * gpio_v2_line_flag, such as GPIO_V2_LINE_FLAG_ACTIVE_LOW,
- * GPIO_V2_LINE_FLAG_OUTPUT etc, OR:ed together.  This is the default for
+ * @flags: flags for the GPIO lines, with values from &enum
+ * gpio_v2_line_flag, such as %GPIO_V2_LINE_FLAG_ACTIVE_LOW,
+ * %GPIO_V2_LINE_FLAG_OUTPUT etc, added together.  This is the default for
  * all requested lines but may be overridden for particular lines using
- * attrs.
- * @num_attrs: the number of attributes in attrs
+ * @attrs.
+ * @num_attrs: the number of attributes in @attrs
  * @padding: reserved for future use and must be zero filled
  * @attrs: the configuration attributes associated with the requested
  * lines.  Any attribute should only be associated with a particular line
@@ -175,17 +175,17 @@ struct gpio_v2_line_config {
  * "my-bitbanged-relay"
  * @config: requested configuration for the lines.
  * @num_lines: number of lines requested in this request, i.e. the number
- * of valid fields in the GPIO_V2_LINES_MAX sized arrays, set to 1 to
+ * of valid fields in the %GPIO_V2_LINES_MAX sized arrays, set to 1 to
  * request a single line
  * @event_buffer_size: a suggested minimum number of line events that the
  * kernel should buffer.  This is only relevant if edge detection is
  * enabled in the configuration. Note that this is only a suggested value
  * and the kernel may allocate a larger buffer or cap the size of the
  * buffer. If this field is zero then the buffer size defaults to a minimum
- * of num_lines*16.
+ * of @num_lines * 16.
  * @padding: reserved for future use and must be zero filled
  * @fd: if successful this field will contain a valid anonymous file handle
- * after a GPIO_GET_LINE_IOCTL operation, zero or negative value means
+ * after a %GPIO_GET_LINE_IOCTL operation, zero or negative value means
  * error
  */
 struct gpio_v2_line_request {
@@ -203,15 +203,16 @@ struct gpio_v2_line_request {
  * struct gpio_v2_line_info - Information about a certain GPIO line
  * @name: the name of this GPIO line, such as the output pin of the line on
  * the chip, a rail or a pin header name on a board, as specified by the
- * GPIO chip, may be empty
+ * GPIO chip, may be empty (i.e. name[0] == '\0')
  * @consumer: a functional name for the consumer of this GPIO line as set
  * by whatever is using it, will be empty if there is no current user but
  * may also be empty if the consumer doesn't set this up
- * @flags: flags for the GPIO line, such as GPIO_V2_LINE_FLAG_ACTIVE_LOW,
- * GPIO_V2_LINE_FLAG_OUTPUT etc, OR:ed together
  * @offset: the local offset on this GPIO chip, fill this in when
  * requesting the line information from the kernel
- * @num_attrs: the number of attributes in attrs
+ * @num_attrs: the number of attributes in @attrs
+ * @flags: flags for the GPIO lines, with values from &enum
+ * gpio_v2_line_flag, such as %GPIO_V2_LINE_FLAG_ACTIVE_LOW,
+ * %GPIO_V2_LINE_FLAG_OUTPUT etc, added together.
  * @attrs: the configuration attributes associated with the line
  * @padding: reserved for future use
  */
@@ -244,7 +245,7 @@ enum gpio_v2_line_changed_type {
  * of a GPIO line
  * @info: updated line information
  * @timestamp_ns: estimate of time of status change occurrence, in nanoseconds
- * @event_type: the type of change with a value from enum
+ * @event_type: the type of change with a value from &enum
  * gpio_v2_line_changed_type
  * @padding: reserved for future use
  */
@@ -269,10 +270,10 @@ enum gpio_v2_line_event_id {
 /**
  * struct gpio_v2_line_event - The actual event being pushed to userspace
  * @timestamp_ns: best estimate of time of event occurrence, in nanoseconds.
- * The timestamp_ns is read from CLOCK_MONOTONIC and is intended to allow the
- * accurate measurement of the time between events.  It does not provide
+ * The @timestamp_ns is read from %CLOCK_MONOTONIC and is intended to allow
+ * the accurate measurement of the time between events. It does not provide
  * the wall-clock time.
- * @id: event identifier with value from enum gpio_v2_line_event_id
+ * @id: event identifier with value from &enum gpio_v2_line_event_id
  * @offset: the offset of the line that triggered the event
  * @seqno: the sequence number for this event in the sequence of events for
  * all the lines in this line request
@@ -291,7 +292,7 @@ struct gpio_v2_line_event {
 };
 
 /*
- *  ABI v1
+ * ABI v1
  *
  * This version of the ABI is deprecated.
  * Use the latest version of the ABI, defined above, instead.
@@ -314,13 +315,13 @@ struct gpio_v2_line_event {
  * @flags: various flags for this line
  * @name: the name of this GPIO line, such as the output pin of the line on the
  * chip, a rail or a pin header name on a board, as specified by the gpio
- * chip, may be empty
+ * chip, may be empty (i.e. name[0] == '\0')
  * @consumer: a functional name for the consumer of this GPIO line as set by
  * whatever is using it, will be empty if there is no current user but may
  * also be empty if the consumer doesn't set this up
  *
- * This struct is part of ABI v1 and is deprecated.
- * Use struct gpio_v2_line_info instead.
+ * Note: This struct is part of ABI v1 and is deprecated.
+ * Use &struct gpio_v2_line_info instead.
  */
 struct gpioline_info {
 	__u32 line_offset;
@@ -344,17 +345,18 @@ enum {
  * of a GPIO line
  * @info: updated line information
  * @timestamp: estimate of time of status change occurrence, in nanoseconds
- * @event_type: one of GPIOLINE_CHANGED_REQUESTED, GPIOLINE_CHANGED_RELEASED
- * and GPIOLINE_CHANGED_CONFIG
+ * @event_type: one of %GPIOLINE_CHANGED_REQUESTED,
+ * %GPIOLINE_CHANGED_RELEASED and %GPIOLINE_CHANGED_CONFIG
+ * @padding: reserved for future use
  *
- * Note: struct gpioline_info embedded here has 32-bit alignment on its own,
+ * The &struct gpioline_info embedded here has 32-bit alignment on its own,
  * but it works fine with 64-bit alignment too. With its 72 byte size, we can
  * guarantee there are no implicit holes between it and subsequent members.
  * The 20-byte padding at the end makes sure we don't add any implicit padding
  * at the end of the structure on 64-bit architectures.
  *
- * This struct is part of ABI v1 and is deprecated.
- * Use struct gpio_v2_line_info_changed instead.
+ * Note: This struct is part of ABI v1 and is deprecated.
+ * Use &struct gpio_v2_line_info_changed instead.
  */
 struct gpioline_info_changed {
 	struct gpioline_info info;
@@ -378,13 +380,13 @@ struct gpioline_info_changed {
  * @lineoffsets: an array of desired lines, specified by offset index for the
  * associated GPIO device
  * @flags: desired flags for the desired GPIO lines, such as
- * GPIOHANDLE_REQUEST_OUTPUT, GPIOHANDLE_REQUEST_ACTIVE_LOW etc, OR:ed
+ * %GPIOHANDLE_REQUEST_OUTPUT, %GPIOHANDLE_REQUEST_ACTIVE_LOW etc, added
  * together. Note that even if multiple lines are requested, the same flags
  * must be applicable to all of them, if you want lines with individual
  * flags set, request them one by one. It is possible to select
  * a batch of input or output lines, but they must all have the same
  * characteristics, i.e. all inputs or all outputs, all active low etc
- * @default_values: if the GPIOHANDLE_REQUEST_OUTPUT is set for a requested
+ * @default_values: if the %GPIOHANDLE_REQUEST_OUTPUT is set for a requested
  * line, this specifies the default output value, should be 0 (low) or
  * 1 (high), anything else than 0 or 1 will be interpreted as 1 (high)
  * @consumer_label: a desired consumer label for the selected GPIO line(s)
@@ -392,11 +394,11 @@ struct gpioline_info_changed {
  * @lines: number of lines requested in this request, i.e. the number of
  * valid fields in the above arrays, set to 1 to request a single line
  * @fd: if successful this field will contain a valid anonymous file handle
- * after a GPIO_GET_LINEHANDLE_IOCTL operation, zero or negative value
+ * after a %GPIO_GET_LINEHANDLE_IOCTL operation, zero or negative value
  * means error
  *
- * This struct is part of ABI v1 and is deprecated.
- * Use struct gpio_v2_line_request instead.
+ * Note: This struct is part of ABI v1 and is deprecated.
+ * Use &struct gpio_v2_line_request instead.
  */
 struct gpiohandle_request {
 	__u32 lineoffsets[GPIOHANDLES_MAX];
@@ -410,15 +412,15 @@ struct gpiohandle_request {
 /**
  * struct gpiohandle_config - Configuration for a GPIO handle request
  * @flags: updated flags for the requested GPIO lines, such as
- * GPIOHANDLE_REQUEST_OUTPUT, GPIOHANDLE_REQUEST_ACTIVE_LOW etc, OR:ed
+ * %GPIOHANDLE_REQUEST_OUTPUT, %GPIOHANDLE_REQUEST_ACTIVE_LOW etc, added
  * together
- * @default_values: if the GPIOHANDLE_REQUEST_OUTPUT is set in flags,
+ * @default_values: if the %GPIOHANDLE_REQUEST_OUTPUT is set in flags,
  * this specifies the default output value, should be 0 (low) or
  * 1 (high), anything else than 0 or 1 will be interpreted as 1 (high)
  * @padding: reserved for future use and should be zero filled
  *
- * This struct is part of ABI v1 and is deprecated.
- * Use struct gpio_v2_line_config instead.
+ * Note: This struct is part of ABI v1 and is deprecated.
+ * Use &struct gpio_v2_line_config instead.
  */
 struct gpiohandle_config {
 	__u32 flags;
@@ -432,8 +434,8 @@ struct gpiohandle_config {
  * state of a line, when setting the state of lines these should contain
  * the desired target state
  *
- * This struct is part of ABI v1 and is deprecated.
- * Use struct gpio_v2_line_values instead.
+ * Note: This struct is part of ABI v1 and is deprecated.
+ * Use &struct gpio_v2_line_values instead.
  */
 struct gpiohandle_data {
 	__u8 values[GPIOHANDLES_MAX];
@@ -449,17 +451,17 @@ struct gpiohandle_data {
  * @lineoffset: the desired line to subscribe to events from, specified by
  * offset index for the associated GPIO device
  * @handleflags: desired handle flags for the desired GPIO line, such as
- * GPIOHANDLE_REQUEST_ACTIVE_LOW or GPIOHANDLE_REQUEST_OPEN_DRAIN
+ * %GPIOHANDLE_REQUEST_ACTIVE_LOW or %GPIOHANDLE_REQUEST_OPEN_DRAIN
  * @eventflags: desired flags for the desired GPIO event line, such as
- * GPIOEVENT_REQUEST_RISING_EDGE or GPIOEVENT_REQUEST_FALLING_EDGE
+ * %GPIOEVENT_REQUEST_RISING_EDGE or %GPIOEVENT_REQUEST_FALLING_EDGE
  * @consumer_label: a desired consumer label for the selected GPIO line(s)
  * such as "my-listener"
  * @fd: if successful this field will contain a valid anonymous file handle
- * after a GPIO_GET_LINEEVENT_IOCTL operation, zero or negative value
+ * after a %GPIO_GET_LINEEVENT_IOCTL operation, zero or negative value
  * means error
  *
- * This struct is part of ABI v1 and is deprecated.
- * Use struct gpio_v2_line_request instead.
+ * Note: This struct is part of ABI v1 and is deprecated.
+ * Use &struct gpio_v2_line_request instead.
  */
 struct gpioevent_request {
 	__u32 lineoffset;
@@ -469,7 +471,7 @@ struct gpioevent_request {
 	int fd;
 };
 
-/**
+/*
  * GPIO event types
  */
 #define GPIOEVENT_EVENT_RISING_EDGE 0x01
@@ -480,8 +482,8 @@ struct gpioevent_request {
  * @timestamp: best estimate of time of event occurrence, in nanoseconds
  * @id: event identifier
  *
- * This struct is part of ABI v1 and is deprecated.
- * Use struct gpio_v2_line_event instead.
+ * Note: This struct is part of ABI v1 and is deprecated.
+ * Use &struct gpio_v2_line_event instead.
  */
 struct gpioevent_data {
 	__u64 timestamp;