Merge remote-tracking branch 'gpio/for-next'

48 files changed, 1658 insertions, 547 deletions

diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
new file mode 100644
index 00000000000000..435f1bcca3415d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
@@ -0,0 +1,65 @@
+Broadcom STB "UPG GIO" GPIO controller
+
+The controller's registers are organized as sets of eight 32-bit
+registers with each set controlling a bank of up to 32 pins.  A single
+interrupt is shared for all of the banks handled by the controller.
+
+Required properties:
+
+- compatible:
+    Must be "brcm,brcmstb-gpio"
+
+- reg:
+    Define the base and range of the I/O address space containing
+    the brcmstb GPIO controller registers
+
+- #gpio-cells:
+    Should be <2>.  The first cell is the pin number (within the controller's
+    pin space), and the second is used for the following:
+    bit[0]: polarity (0 for active-high, 1 for active-low)
+
+- gpio-controller:
+    Specifies that the node is a GPIO controller.
+
+- brcm,gpio-bank-widths:
+    Number of GPIO lines for each bank.  Number of elements must
+    correspond to number of banks suggested by the 'reg' property.
+
+Optional properties:
+
+- interrupts:
+    The interrupt shared by all GPIO lines for this controller.
+
+- interrupt-parent:
+    phandle of the parent interrupt controller
+
+- #interrupt-cells:
+    Should be <2>.  The first cell is the GPIO number, the second should specify
+    flags.  The following subset of flags is supported:
+    - bits[3:0] trigger type and level flags
+        1 = low-to-high edge triggered
+        2 = high-to-low edge triggered
+        4 = active high level-sensitive
+        8 = active low level-sensitive
+      Valid combinations are 1, 2, 3, 4, 8.
+    See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+- interrupt-controller:
+    Marks the device node as an interrupt controller
+
+- interrupt-names:
+    The name of the IRQ resource used by this controller
+
+Example:
+	upg_gio: gpio@f040a700 {
+		#gpio-cells = <0x2>;
+		#interrupt-cells = <0x2>;
+		compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+		gpio-controller;
+		interrupt-controller;
+		reg = <0xf040a700 0x80>;
+		interrupt-parent = <0xf>;
+		interrupts = <0x6>;
+		interrupt-names = "upg_gio";
+		brcm,gpio-bank-widths = <0x20 0x20 0x20 0x18>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
new file mode 100644
index 00000000000000..262ee4ddf2cb6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
@@ -0,0 +1,47 @@
+Netlogic XLP Family GPIO
+========================
+
+This GPIO driver is used for following Netlogic XLP SoCs:
+	XLP832, XLP316, XLP208, XLP980, XLP532
+
+Required properties:
+-------------------
+
+- compatible: Should be one of the following:
+  - "netlogic,xlp832-gpio": For Netlogic XLP832
+  - "netlogic,xlp316-gpio": For Netlogic XLP316
+  - "netlogic,xlp208-gpio": For Netlogic XLP208
+  - "netlogic,xlp980-gpio": For Netlogic XLP980
+  - "netlogic,xlp532-gpio": For Netlogic XLP532
+- reg: Physical base address and length of the controller's registers.
+- #gpio-cells: Should be two. The first cell is the pin number and the second
+  cell is used to specify optional parameters (currently unused).
+- gpio-controller: Marks the device node as a GPIO controller.
+- nr-gpios: Number of GPIO pins supported by the controller.
+- interrupt-cells: Should be two. The first cell is the GPIO Number. The
+  second cell is used to specify flags. The following subset of flags is
+  supported:
+  - trigger type:
+	1 = low to high edge triggered.
+	2 = high to low edge triggered.
+	4 = active high level-sensitive.
+	8 = active low level-sensitive.
+- interrupts: Interrupt number for this device.
+- interrupt-parent: phandle of the parent interrupt controller.
+- interrupt-controller: Identifies the node as an interrupt controller.
+
+Example:
+
+	gpio: xlp_gpio@34000 {
+		compatible = "netlogic,xlp316-gpio";
+		reg = <0 0x34100 0x1000
+		       0 0x35100 0x1000>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		nr-gpios = <57>;
+
+		#interrupt-cells = <2>;
+		interrupt-parent = <&pic>;
+		interrupts = <39>;
+		interrupt-controller;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
new file mode 100644
index 00000000000000..eb7cdd69e10bf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
@@ -0,0 +1,39 @@
+NXP LPC18xx/43xx GPIO controller Device Tree Bindings
+-----------------------------------------------------
+
+Required properties:
+- compatible		: Should be "nxp,lpc1850-gpio"
+- reg			: Address and length of the register set for the device
+- clocks		: Clock specifier (see clock bindings for details)
+- gpio-controller	: Marks the device node as a GPIO controller.
+- #gpio-cells 		: Should be two
+			  - First cell is the GPIO line number
+			  - Second cell is used to specify polarity
+
+Optional properties:
+- gpio-ranges		: Mapping between GPIO and pinctrl
+
+Example:
+#define LPC_GPIO(port, pin)	(port * 32 + pin)
+#define LPC_PIN(port, pin)	(0x##port * 32 + pin)
+
+gpio: gpio@400f4000 {
+	compatible = "nxp,lpc1850-gpio";
+	reg = <0x400f4000 0x4000>;
+	clocks = <&ccu1 CLK_CPU_GPIO>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	gpio-ranges =	<&pinctrl LPC_GPIO(0,0)  LPC_PIN(0,0)  2>,
+			...
+			<&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5)  7>;
+};
+
+gpio_joystick {
+	compatible = "gpio-keys-polled";
+	...
+
+	button@0 {
+		...
+		gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
index 15ec6d69102cf4..75542b91b766c2 100644
--- a/Documentation/gpio/consumer.txt
+++ b/Documentation/gpio/consumer.txt
@@ -241,18 +241,18 @@ Set multiple GPIO outputs with a single function call
 -----------------------------------------------------
 The following functions set the output values of an array of GPIOs:
 
-	void gpiod_set_array(unsigned int array_size,
-			     struct gpio_desc **desc_array,
-			     int *value_array)
-	void gpiod_set_raw_array(unsigned int array_size,
-				 struct gpio_desc **desc_array,
-				 int *value_array)
-	void gpiod_set_array_cansleep(unsigned int array_size,
-				      struct gpio_desc **desc_array,
-				      int *value_array)
-	void gpiod_set_raw_array_cansleep(unsigned int array_size,
-					  struct gpio_desc **desc_array,
-					  int *value_array)
+	void gpiod_set_array_value(unsigned int array_size,
+				   struct gpio_desc **desc_array,
+				   int *value_array)
+	void gpiod_set_raw_array_value(unsigned int array_size,
+				       struct gpio_desc **desc_array,
+				       int *value_array)
+	void gpiod_set_array_value_cansleep(unsigned int array_size,
+					    struct gpio_desc **desc_array,
+					    int *value_array)
+	void gpiod_set_raw_array_value_cansleep(unsigned int array_size,
+						struct gpio_desc **desc_array,
+						int *value_array)
 
 The array can be an arbitrary set of GPIOs. The functions will try to set
 GPIOs belonging to the same bank or chip simultaneously if supported by the
@@ -271,8 +271,8 @@ matches the desired group of GPIOs, those GPIOs can be set by simply using
 the struct gpio_descs returned by gpiod_get_array():
 
 	struct gpio_descs *my_gpio_descs = gpiod_get_array(...);
-	gpiod_set_array(my_gpio_descs->ndescs, my_gpio_descs->desc,
-			my_gpio_values);
+	gpiod_set_array_value(my_gpio_descs->ndescs, my_gpio_descs->desc,
+			      my_gpio_values);
 
 It is also possible to set a completely arbitrary array of descriptors. The
 descriptors may be obtained using any combination of gpiod_get() and
diff --git a/Documentation/gpio/gpio-legacy.txt b/Documentation/gpio/gpio-legacy.txt
index 6f83fa965b4b6e..79ab5648d69b3e 100644
--- a/Documentation/gpio/gpio-legacy.txt
+++ b/Documentation/gpio/gpio-legacy.txt
@@ -751,9 +751,6 @@ requested using gpio_request():
 	int gpio_export_link(struct device *dev, const char *name,
 		unsigned gpio)
 
-	/* change the polarity of a GPIO node in sysfs */
-	int gpio_sysfs_set_active_low(unsigned gpio, int value);
-
 After a kernel driver requests a GPIO, it may only be made available in
 the sysfs interface by gpio_export().  The driver can control whether the
 signal direction may change.  This helps drivers prevent userspace code
@@ -767,9 +764,3 @@ After the GPIO has been exported, gpio_export_link() allows creating
 symlinks from elsewhere in sysfs to the GPIO sysfs node.  Drivers can
 use this to provide the interface under their own device in sysfs with
 a descriptive name.
-
-Drivers can use gpio_sysfs_set_active_low() to hide GPIO line polarity
-differences between boards from user space.  This only affects the
-sysfs interface.  Polarity change can be done both before and after
-gpio_export(), and previously enabled poll(2) support for either
-rising or falling edge will be reconfigured to follow this setting.
diff --git a/Documentation/gpio/sysfs.txt b/Documentation/gpio/sysfs.txt
index c2c3a97f8ff7c2..535b6a8a7a7cca 100644
--- a/Documentation/gpio/sysfs.txt
+++ b/Documentation/gpio/sysfs.txt
@@ -132,9 +132,6 @@ requested using gpio_request():
 	int gpiod_export_link(struct device *dev, const char *name,
 		      struct gpio_desc *desc);
 
-	/* change the polarity of a GPIO node in sysfs */
-	int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
-
 After a kernel driver requests a GPIO, it may only be made available in
 the sysfs interface by gpiod_export(). The driver can control whether the
 signal direction may change. This helps drivers prevent userspace code
@@ -148,8 +145,3 @@ After the GPIO has been exported, gpiod_export_link() allows creating
 symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
 use this to provide the interface under their own device in sysfs with
 a descriptive name.
-
-Drivers can use gpiod_sysfs_set_active_low() to hide GPIO line polarity
-differences between boards from user space. Polarity change can be done both
-before and after gpiod_export(), and previously enabled poll(2) support for
-either rising or falling edge will be reconfigured to follow this setting.
diff --git a/Documentation/zh_CN/gpio.txt b/Documentation/zh_CN/gpio.txt
index d5b8f01833f413..bce9725210659d 100644
--- a/Documentation/zh_CN/gpio.txt
+++ b/Documentation/zh_CN/gpio.txt
@@ -638,9 +638,6 @@ GPIO 控制器的路径类似 /sys/class/gpio/gpiochip42/ (对于从#42 GPIO
 	int gpio_export_link(struct device *dev, const char *name,
 		unsigned gpio)
 
-	/* 改变 sysfs 中的一个 GPIO 节点的极性 */
-	int gpio_sysfs_set_active_low(unsigned gpio, int value);
-
 在一个内核驱动申请一个 GPIO 之后，它可以通过 gpio_export()使其在 sysfs
 接口中可见。该驱动可以控制信号方向是否可修改。这有助于防止用户空间代码无意间
 破坏重要的系统状态。
@@ -651,8 +648,3 @@ GPIO 控制器的路径类似 /sys/class/gpio/gpiochip42/ (对于从#42 GPIO
 在 GPIO 被导出之后，gpio_export_link()允许在 sysfs 文件系统的任何地方
 创建一个到这个 GPIO sysfs 节点的符号链接。这样驱动就可以通过一个描述性的
 名字，在 sysfs 中他们所拥有的设备下提供一个(到这个 GPIO sysfs 节点的)接口。
-
-驱动可以使用 gpio_sysfs_set_active_low() 来在用户空间隐藏电路板之间
-GPIO 线的极性差异。这个仅对 sysfs 接口起作用。极性的改变可以在 gpio_export()
-前后进行,且之前使能的轮询操作(poll(2))支持(上升或下降沿)将会被重新配置来遵循
-这个设置。
diff --git a/MAINTAINERS b/MAINTAINERS
index 9ded1c448958c3..41cbe98d5d9096 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2309,6 +2309,13 @@ N:	bcm9583*
 N:	bcm583*
 N:	bcm113*
 
+BROADCOM BRCMSTB GPIO DRIVER
+M:	Gregory Fong <gregory.0xf0@gmail.com>
+L:	bcm-kernel-feedback-list@broadcom.com>
+S:	Supported
+F:	drivers/gpio/gpio-brcmstb.c
+F:	Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
+
 BROADCOM KONA GPIO DRIVER
 M:	Ray Jui <rjui@broadcom.com>
 L:	bcm-kernel-feedback-list@broadcom.com
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index caefe806db5e6d..d86de6ae0a0e89 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -126,6 +126,14 @@ config GPIO_BCM_KONA
 	help
 	  Turn on GPIO support for Broadcom "Kona" chips.
 
+config GPIO_BRCMSTB
+	tristate "BRCMSTB GPIO support"
+	default y if ARCH_BRCMSTB
+	depends on OF_GPIO && (ARCH_BRCMSTB || COMPILE_TEST)
+	select GPIO_GENERIC
+	help
+	  Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs.
+
 config GPIO_CLPS711X
 	tristate "CLPS711X GPIO support"
 	depends on ARCH_CLPS711X || COMPILE_TEST
@@ -230,6 +238,14 @@ config GPIO_LOONGSON
 	help
 	  driver for GPIO functionality on Loongson-2F/3A/3B processors.
 
+config GPIO_LPC18XX
+	bool "NXP LPC18XX/43XX GPIO support"
+	default y if ARCH_LPC18XX
+	depends on OF_GPIO && (ARCH_LPC18XX || COMPILE_TEST)
+	help
+	  Select this option to enable GPIO driver for
+	  NXP LPC18XX/43XX devices.
+
 config GPIO_LYNXPOINT
 	tristate "Intel Lynxpoint GPIO support"
 	depends on ACPI && X86
@@ -308,7 +324,7 @@ config GPIO_OCTEON
 	  family of SOCs.
 
 config GPIO_OMAP
-	bool "TI OMAP GPIO support" if COMPILE_TEST && !ARCH_OMAP2PLUS
+	tristate "TI OMAP GPIO support" if ARCH_OMAP2PLUS || COMPILE_TEST
 	default y if ARCH_OMAP
 	depends on ARM
 	select GENERIC_IRQ_CHIP
@@ -488,6 +504,17 @@ config GPIO_XILINX
 	help
 	  Say yes here to support the Xilinx FPGA GPIO device
 
+config GPIO_XLP
+	tristate "Netlogic XLP GPIO support"
+	depends on CPU_XLP
+	select GPIOLIB_IRQCHIP
+	help
+	  This driver provides support for GPIO interface on Netlogic XLP MIPS64
+	  SoCs. Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX,
+	  XLP9XX and XLP5XX.
+
+	  If unsure, say N.
+
 config GPIO_XTENSA
 	bool "Xtensa GPIO32 support"
 	depends on XTENSA
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index f71bb971329c9e..893bbffc313ae2 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_GPIO_ALTERA)  	+= gpio-altera.o
 obj-$(CONFIG_GPIO_AMD8111)	+= gpio-amd8111.o
 obj-$(CONFIG_GPIO_ARIZONA)	+= gpio-arizona.o
 obj-$(CONFIG_GPIO_BCM_KONA)	+= gpio-bcm-kona.o
+obj-$(CONFIG_GPIO_BRCMSTB)	+= gpio-brcmstb.o
 obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
 obj-$(CONFIG_GPIO_CLPS711X)	+= gpio-clps711x.o
 obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
@@ -44,6 +45,7 @@ obj-$(CONFIG_ARCH_KS8695)	+= gpio-ks8695.o
 obj-$(CONFIG_GPIO_INTEL_MID)	+= gpio-intel-mid.o
 obj-$(CONFIG_GPIO_LOONGSON)	+= gpio-loongson.o
 obj-$(CONFIG_GPIO_LP3943)	+= gpio-lp3943.o
+obj-$(CONFIG_GPIO_LPC18XX)	+= gpio-lpc18xx.o
 obj-$(CONFIG_ARCH_LPC32XX)	+= gpio-lpc32xx.o
 obj-$(CONFIG_GPIO_LYNXPOINT)	+= gpio-lynxpoint.o
 obj-$(CONFIG_GPIO_MAX730X)	+= gpio-max730x.o
@@ -109,6 +111,7 @@ obj-$(CONFIG_GPIO_WM8994)	+= gpio-wm8994.o
 obj-$(CONFIG_GPIO_XGENE)	+= gpio-xgene.o
 obj-$(CONFIG_GPIO_XGENE_SB)	+= gpio-xgene-sb.o
 obj-$(CONFIG_GPIO_XILINX)	+= gpio-xilinx.o
+obj-$(CONFIG_GPIO_XLP)		+= gpio-xlp.o
 obj-$(CONFIG_GPIO_XTENSA)	+= gpio-xtensa.o
 obj-$(CONFIG_GPIO_ZEVIO)	+= gpio-zevio.o
 obj-$(CONFIG_GPIO_ZYNQ)		+= gpio-zynq.o
diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index cb89f37ffc0203..8333f878919c4d 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -122,6 +122,16 @@ static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio,
 	spin_unlock_irqrestore(&kona_gpio->lock, flags);
 }
 
+static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio)
+{
+	struct bcm_kona_gpio *kona_gpio = to_kona_gpio(chip);
+	void __iomem *reg_base = kona_gpio->reg_base;
+	u32 val;
+
+	val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK;
+	return val ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
+}
+
 static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
 {
 	struct bcm_kona_gpio *kona_gpio;
@@ -135,12 +145,8 @@ static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
 	reg_base = kona_gpio->reg_base;
 	spin_lock_irqsave(&kona_gpio->lock, flags);
 
-	/* determine the GPIO pin direction */
-	val = readl(reg_base + GPIO_CONTROL(gpio));
-	val &= GPIO_GPCTR0_IOTR_MASK;
-
 	/* this function only applies to output pin */
-	if (GPIO_GPCTR0_IOTR_CMD_INPUT == val)
+	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
 		goto out;
 
 	reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
@@ -166,13 +172,12 @@ static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
 	reg_base = kona_gpio->reg_base;
 	spin_lock_irqsave(&kona_gpio->lock, flags);
 
-	/* determine the GPIO pin direction */
-	val = readl(reg_base + GPIO_CONTROL(gpio));
-	val &= GPIO_GPCTR0_IOTR_MASK;
+	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
+		reg_offset = GPIO_IN_STATUS(bank_id);
+	else
+		reg_offset = GPIO_OUT_STATUS(bank_id);
 
 	/* read the GPIO bank status */
-	reg_offset = (GPIO_GPCTR0_IOTR_CMD_INPUT == val) ?
-	    GPIO_IN_STATUS(bank_id) : GPIO_OUT_STATUS(bank_id);
 	val = readl(reg_base + reg_offset);
 
 	spin_unlock_irqrestore(&kona_gpio->lock, flags);
@@ -310,6 +315,7 @@ static struct gpio_chip template_chip = {
 	.owner = THIS_MODULE,
 	.request = bcm_kona_gpio_request,
 	.free = bcm_kona_gpio_free,
+	.get_direction = bcm_kona_gpio_get_dir,
 	.direction_input = bcm_kona_gpio_direction_input,
 	.get = bcm_kona_gpio_get,
 	.direction_output = bcm_kona_gpio_direction_output,
diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
new file mode 100644
index 00000000000000..7a3cb1fa0a766a
--- /dev/null
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/module.h>
+#include <linux/basic_mmio_gpio.h>
+
+#define GIO_BANK_SIZE           0x20
+#define GIO_ODEN(bank)          (((bank) * GIO_BANK_SIZE) + 0x00)
+#define GIO_DATA(bank)          (((bank) * GIO_BANK_SIZE) + 0x04)
+#define GIO_IODIR(bank)         (((bank) * GIO_BANK_SIZE) + 0x08)
+#define GIO_EC(bank)            (((bank) * GIO_BANK_SIZE) + 0x0c)
+#define GIO_EI(bank)            (((bank) * GIO_BANK_SIZE) + 0x10)
+#define GIO_MASK(bank)          (((bank) * GIO_BANK_SIZE) + 0x14)
+#define GIO_LEVEL(bank)         (((bank) * GIO_BANK_SIZE) + 0x18)
+#define GIO_STAT(bank)          (((bank) * GIO_BANK_SIZE) + 0x1c)
+
+struct brcmstb_gpio_bank {
+	struct list_head node;
+	int id;
+	struct bgpio_chip bgc;
+	struct brcmstb_gpio_priv *parent_priv;
+	u32 width;
+};
+
+struct brcmstb_gpio_priv {
+	struct list_head bank_list;
+	void __iomem *reg_base;
+	int num_banks;
+	struct platform_device *pdev;
+	int gpio_base;
+};
+
+#define MAX_GPIO_PER_BANK           32
+#define GPIO_BANK(gpio)         ((gpio) >> 5)
+/* assumes MAX_GPIO_PER_BANK is a multiple of 2 */
+#define GPIO_BIT(gpio)          ((gpio) & (MAX_GPIO_PER_BANK - 1))
+
+static inline struct brcmstb_gpio_bank *
+brcmstb_gpio_gc_to_bank(struct gpio_chip *gc)
+{
+	struct bgpio_chip *bgc = to_bgpio_chip(gc);
+	return container_of(bgc, struct brcmstb_gpio_bank, bgc);
+}
+
+static inline struct brcmstb_gpio_priv *
+brcmstb_gpio_gc_to_priv(struct gpio_chip *gc)
+{
+	struct brcmstb_gpio_bank *bank = brcmstb_gpio_gc_to_bank(gc);
+	return bank->parent_priv;
+}
+
+/* Make sure that the number of banks matches up between properties */
+static int brcmstb_gpio_sanity_check_banks(struct device *dev,
+		struct device_node *np, struct resource *res)
+{
+	int res_num_banks = resource_size(res) / GIO_BANK_SIZE;
+	int num_banks =
+		of_property_count_u32_elems(np, "brcm,gpio-bank-widths");
+
+	if (res_num_banks != num_banks) {
+		dev_err(dev, "Mismatch in banks: res had %d, bank-widths had %d\n",
+				res_num_banks, num_banks);
+		return -EINVAL;
+	} else {
+		return 0;
+	}
+}
+
+static int brcmstb_gpio_remove(struct platform_device *pdev)
+{
+	struct brcmstb_gpio_priv *priv = platform_get_drvdata(pdev);
+	struct list_head *pos;
+	struct brcmstb_gpio_bank *bank;
+	int ret = 0;
+
+	list_for_each(pos, &priv->bank_list) {
+		bank = list_entry(pos, struct brcmstb_gpio_bank, node);
+		ret = bgpio_remove(&bank->bgc);
+		if (ret)
+			dev_err(&pdev->dev, "gpiochip_remove fail in cleanup");
+	}
+	return ret;
+}
+
+static int brcmstb_gpio_of_xlate(struct gpio_chip *gc,
+		const struct of_phandle_args *gpiospec, u32 *flags)
+{
+	struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
+	struct brcmstb_gpio_bank *bank = brcmstb_gpio_gc_to_bank(gc);
+	int offset;
+
+	if (gc->of_gpio_n_cells != 2) {
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
+		return -EINVAL;
+
+	offset = gpiospec->args[0] - (gc->base - priv->gpio_base);
+	if (offset >= gc->ngpio)
+		return -EINVAL;
+
+	if (unlikely(offset >= bank->width)) {
+		dev_warn_ratelimited(&priv->pdev->dev,
+			"Received request for invalid GPIO offset %d\n",
+			gpiospec->args[0]);
+	}
+
+	if (flags)
+		*flags = gpiospec->args[1];
+
+	return offset;
+}
+
+static int brcmstb_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	void __iomem *reg_base;
+	struct brcmstb_gpio_priv *priv;
+	struct resource *res;
+	struct property *prop;
+	const __be32 *p;
+	u32 bank_width;
+	int err;
+	static int gpio_base;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
+
+	priv->gpio_base = gpio_base;
+	priv->reg_base = reg_base;
+	priv->pdev = pdev;
+
+	INIT_LIST_HEAD(&priv->bank_list);
+	if (brcmstb_gpio_sanity_check_banks(dev, np, res))
+		return -EINVAL;
+
+	of_property_for_each_u32(np, "brcm,gpio-bank-widths", prop, p,
+			bank_width) {
+		struct brcmstb_gpio_bank *bank;
+		struct bgpio_chip *bgc;
+		struct gpio_chip *gc;
+
+		bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL);
+		if (!bank) {
+			err = -ENOMEM;
+			goto fail;
+		}
+
+		bank->parent_priv = priv;
+		bank->id = priv->num_banks;
+		if (bank_width <= 0 || bank_width > MAX_GPIO_PER_BANK) {
+			dev_err(dev, "Invalid bank width %d\n", bank_width);
+			goto fail;
+		} else {
+			bank->width = bank_width;
+		}
+
+		/*
+		 * Regs are 4 bytes wide, have data reg, no set/clear regs,
+		 * and direction bits have 0 = output and 1 = input
+		 */
+		bgc = &bank->bgc;
+		err = bgpio_init(bgc, dev, 4,
+				reg_base + GIO_DATA(bank->id),
+				NULL, NULL, NULL,
+				reg_base + GIO_IODIR(bank->id), 0);
+		if (err) {
+			dev_err(dev, "bgpio_init() failed\n");
+			goto fail;
+		}
+
+		gc = &bgc->gc;
+		gc->of_node = np;
+		gc->owner = THIS_MODULE;
+		gc->label = np->full_name;
+		gc->base = gpio_base;
+		gc->of_gpio_n_cells = 2;
+		gc->of_xlate = brcmstb_gpio_of_xlate;
+		/* not all ngpio lines are valid, will use bank width later */
+		gc->ngpio = MAX_GPIO_PER_BANK;
+
+		err = gpiochip_add(gc);
+		if (err) {
+			dev_err(dev, "Could not add gpiochip for bank %d\n",
+					bank->id);
+			goto fail;
+		}
+		gpio_base += gc->ngpio;
+		dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id,
+			gc->base, gc->ngpio, bank->width);
+
+		/* Everything looks good, so add bank to list */
+		list_add(&bank->node, &priv->bank_list);
+
+		priv->num_banks++;
+	}
+
+	dev_info(dev, "Registered %d banks (GPIO(s): %d-%d)\n",
+			priv->num_banks, priv->gpio_base, gpio_base - 1);
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+
+fail:
+	(void) brcmstb_gpio_remove(pdev);
+	return err;
+}
+
+static const struct of_device_id brcmstb_gpio_of_match[] = {
+	{ .compatible = "brcm,brcmstb-gpio" },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, brcmstb_gpio_of_match);
+
+static struct platform_driver brcmstb_gpio_driver = {
+	.driver = {
+		.name = "brcmstb-gpio",
+		.of_match_table = brcmstb_gpio_of_match,
+	},
+	.probe = brcmstb_gpio_probe,
+	.remove = brcmstb_gpio_remove,
+};
+module_platform_driver(brcmstb_gpio_driver);
+
+MODULE_AUTHOR("Gregory Fong");
+MODULE_DESCRIPTION("Driver for Broadcom BRCMSTB SoC UPG GPIO");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c
index 91a7ffe831350a..2c39811366bffc 100644
--- a/drivers/gpio/gpio-crystalcove.c
+++ b/drivers/gpio/gpio-crystalcove.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/seq_file.h>
@@ -255,6 +256,7 @@ static struct irq_chip crystalcove_irqchip = {
 	.irq_set_type		= crystalcove_irq_type,
 	.irq_bus_lock		= crystalcove_bus_lock,
 	.irq_bus_sync_unlock	= crystalcove_bus_sync_unlock,
+	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 
 static irqreturn_t crystalcove_gpio_irq_handler(int irq, void *data)
diff --git a/drivers/gpio/gpio-dln2.c b/drivers/gpio/gpio-dln2.c
index dbdb4de82c6db3..6685712c15cf0f 100644
--- a/drivers/gpio/gpio-dln2.c
+++ b/drivers/gpio/gpio-dln2.c
@@ -466,7 +466,6 @@ static int dln2_gpio_probe(struct platform_device *pdev)
 	dln2->gpio.owner = THIS_MODULE;
 	dln2->gpio.base = -1;
 	dln2->gpio.ngpio = pins;
-	dln2->gpio.exported = true;
 	dln2->gpio.can_sleep = true;
 	dln2->gpio.irq_not_threaded = true;
 	dln2->gpio.set = dln2_gpio_set;
diff --git a/drivers/gpio/gpio-generic.c b/drivers/gpio/gpio-generic.c
index b92a690f5765c3..9bda3727fac12d 100644
--- a/drivers/gpio/gpio-generic.c
+++ b/drivers/gpio/gpio-generic.c
@@ -135,6 +135,17 @@ static unsigned long bgpio_pin2mask_be(struct bgpio_chip *bgc,
 	return 1 << (bgc->bits - 1 - pin);
 }
 
+static int bgpio_get_set(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct bgpio_chip *bgc = to_bgpio_chip(gc);
+	unsigned long pinmask = bgc->pin2mask(bgc, gpio);
+
+	if (bgc->dir & pinmask)
+		return bgc->read_reg(bgc->reg_set) & pinmask;
+	else
+		return bgc->read_reg(bgc->reg_dat) & pinmask;
+}
+
 static int bgpio_get(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct bgpio_chip *bgc = to_bgpio_chip(gc);
@@ -416,7 +427,8 @@ static int bgpio_setup_accessors(struct device *dev,
 static int bgpio_setup_io(struct bgpio_chip *bgc,
 			  void __iomem *dat,
 			  void __iomem *set,
-			  void __iomem *clr)
+			  void __iomem *clr,
+			  unsigned long flags)
 {
 
 	bgc->reg_dat = dat;
@@ -437,7 +449,11 @@ static int bgpio_setup_io(struct bgpio_chip *bgc,
 		bgc->gc.set_multiple = bgpio_set_multiple;
 	}
 
-	bgc->gc.get = bgpio_get;
+	if (!(flags & BGPIOF_UNREADABLE_REG_SET) &&
+	    (flags & BGPIOF_READ_OUTPUT_REG_SET))
+		bgc->gc.get = bgpio_get_set;
+	else
+		bgc->gc.get = bgpio_get;
 
 	return 0;
 }
@@ -500,7 +516,7 @@ int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
 	bgc->gc.ngpio = bgc->bits;
 	bgc->gc.request = bgpio_request;
 
-	ret = bgpio_setup_io(bgc, dat, set, clr);
+	ret = bgpio_setup_io(bgc, dat, set, clr, flags);
 	if (ret)
 		return ret;
 
diff --git a/drivers/gpio/gpio-lpc18xx.c b/drivers/gpio/gpio-lpc18xx.c
new file mode 100644
index 00000000000000..eb68603136b0e7
--- /dev/null
+++ b/drivers/gpio/gpio-lpc18xx.c
@@ -0,0 +1,180 @@
+/*
+ * GPIO driver for NXP LPC18xx/43xx.
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+
+/* LPC18xx GPIO register offsets */
+#define LPC18XX_REG_DIR(n)	(0x2000 + n * sizeof(u32))
+
+#define LPC18XX_MAX_PORTS	8
+#define LPC18XX_PINS_PER_PORT	32
+
+struct lpc18xx_gpio_chip {
+	struct gpio_chip gpio;
+	void __iomem *base;
+	struct clk *clk;
+	spinlock_t lock;
+};
+
+static inline struct lpc18xx_gpio_chip *to_lpc18xx_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct lpc18xx_gpio_chip, gpio);
+}
+
+static int lpc18xx_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	return pinctrl_request_gpio(offset);
+}
+
+static void lpc18xx_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	pinctrl_free_gpio(offset);
+}
+
+static void lpc18xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct lpc18xx_gpio_chip *gc = to_lpc18xx_gpio(chip);
+	writeb(value ? 1 : 0, gc->base + offset);
+}
+
+static int lpc18xx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct lpc18xx_gpio_chip *gc = to_lpc18xx_gpio(chip);
+	return !!readb(gc->base + offset);
+}
+
+static int lpc18xx_gpio_direction(struct gpio_chip *chip, unsigned offset,
+				  bool out)
+{
+	struct lpc18xx_gpio_chip *gc = to_lpc18xx_gpio(chip);
+	unsigned long flags;
+	u32 port, pin, dir;
+
+	port = offset / LPC18XX_PINS_PER_PORT;
+	pin  = offset % LPC18XX_PINS_PER_PORT;
+
+	spin_lock_irqsave(&gc->lock, flags);
+	dir = readl(gc->base + LPC18XX_REG_DIR(port));
+	if (out)
+		dir |= BIT(pin);
+	else
+		dir &= ~BIT(pin);
+	writel(dir, gc->base + LPC18XX_REG_DIR(port));
+	spin_unlock_irqrestore(&gc->lock, flags);
+
+	return 0;
+}
+
+static int lpc18xx_gpio_direction_input(struct gpio_chip *chip,
+					unsigned offset)
+{
+	return lpc18xx_gpio_direction(chip, offset, false);
+}
+
+static int lpc18xx_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned offset, int value)
+{
+	lpc18xx_gpio_set(chip, offset, value);
+	return lpc18xx_gpio_direction(chip, offset, true);
+}
+
+static struct gpio_chip lpc18xx_chip = {
+	.label			= "lpc18xx/43xx-gpio",
+	.request		= lpc18xx_gpio_request,
+	.free			= lpc18xx_gpio_free,
+	.direction_input	= lpc18xx_gpio_direction_input,
+	.direction_output	= lpc18xx_gpio_direction_output,
+	.set			= lpc18xx_gpio_set,
+	.get			= lpc18xx_gpio_get,
+	.ngpio			= LPC18XX_MAX_PORTS * LPC18XX_PINS_PER_PORT,
+	.owner			= THIS_MODULE,
+};
+
+static int lpc18xx_gpio_probe(struct platform_device *pdev)
+{
+	struct lpc18xx_gpio_chip *gc;
+	struct resource *res;
+	int ret;
+
+	gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
+	if (!gc)
+		return -ENOMEM;
+
+	gc->gpio = lpc18xx_chip;
+	platform_set_drvdata(pdev, gc);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	gc->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(gc->base))
+		return PTR_ERR(gc->base);
+
+	gc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(gc->clk)) {
+		dev_err(&pdev->dev, "input clock not found\n");
+		return PTR_ERR(gc->clk);
+	}
+
+	ret = clk_prepare_enable(gc->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable clock\n");
+		return ret;
+	}
+
+	spin_lock_init(&gc->lock);
+
+	gc->gpio.dev = &pdev->dev;
+
+	ret = gpiochip_add(&gc->gpio);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add gpio chip\n");
+		clk_disable_unprepare(gc->clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int lpc18xx_gpio_remove(struct platform_device *pdev)
+{
+	struct lpc18xx_gpio_chip *gc = platform_get_drvdata(pdev);
+
+	gpiochip_remove(&gc->gpio);
+	clk_disable_unprepare(gc->clk);
+
+	return 0;
+}
+
+static const struct of_device_id lpc18xx_gpio_match[] = {
+	{ .compatible = "nxp,lpc1850-gpio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_gpio_match);
+
+static struct platform_driver lpc18xx_gpio_driver = {
+	.probe	= lpc18xx_gpio_probe,
+	.remove	= lpc18xx_gpio_remove,
+	.driver	= {
+		.name		= "lpc18xx-gpio",
+		.of_match_table	= lpc18xx_gpio_match,
+	},
+};
+module_platform_driver(lpc18xx_gpio_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_DESCRIPTION("GPIO driver for LPC18xx/43xx");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-lynxpoint.c b/drivers/gpio/gpio-lynxpoint.c
index 127c755b38dc28..153af464c7a780 100644
--- a/drivers/gpio/gpio-lynxpoint.c
+++ b/drivers/gpio/gpio-lynxpoint.c
@@ -72,7 +72,7 @@ struct lp_gpio {
  *
  * per gpio specific registers consist of two 32bit registers per gpio
  * (LP_CONFIG1 and LP_CONFIG2), with 94 gpios there's a total of
- * 188 config registes.
+ * 188 config registers.
  *
  * A simplified view of the register layout look like this:
  *
diff --git a/drivers/gpio/gpio-max732x.c b/drivers/gpio/gpio-max732x.c
index 0fa4543c5e0250..aed4ca9338bca1 100644
--- a/drivers/gpio/gpio-max732x.c
+++ b/drivers/gpio/gpio-max732x.c
@@ -429,6 +429,14 @@ static int max732x_irq_set_type(struct irq_data *d, unsigned int type)
 	return 0;
 }
 
+static int max732x_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+	struct max732x_chip *chip = irq_data_get_irq_chip_data(data);
+
+	irq_set_irq_wake(chip->client->irq, on);
+	return 0;
+}
+
 static struct irq_chip max732x_irq_chip = {
 	.name			= "max732x",
 	.irq_mask		= max732x_irq_mask,
@@ -436,6 +444,7 @@ static struct irq_chip max732x_irq_chip = {
 	.irq_bus_lock		= max732x_irq_bus_lock,
 	.irq_bus_sync_unlock	= max732x_irq_bus_sync_unlock,
 	.irq_set_type		= max732x_irq_set_type,
+	.irq_set_wake		= max732x_irq_set_wake,
 };
 
 static uint8_t max732x_irq_pending(struct max732x_chip *chip)
@@ -507,12 +516,10 @@ static int max732x_irq_setup(struct max732x_chip *chip,
 		chip->irq_features = has_irq;
 		mutex_init(&chip->irq_lock);
 
-		ret = devm_request_threaded_irq(&client->dev,
-					client->irq,
-					NULL,
-					max732x_irq_handler,
-					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-					dev_name(&client->dev), chip);
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+				NULL, max732x_irq_handler, IRQF_ONESHOT |
+				IRQF_TRIGGER_FALLING | IRQF_SHARED,
+				dev_name(&client->dev), chip);
 		if (ret) {
 			dev_err(&client->dev, "failed to request irq %d\n",
 				client->irq);
@@ -521,7 +528,7 @@ static int max732x_irq_setup(struct max732x_chip *chip,
 		ret =  gpiochip_irqchip_add(&chip->gpio_chip,
 					    &max732x_irq_chip,
 					    irq_base,
-					    handle_edge_irq,
+					    handle_simple_irq,
 					    IRQ_TYPE_NONE);
 		if (ret) {
 			dev_err(&client->dev,
diff --git a/drivers/gpio/gpio-moxart.c b/drivers/gpio/gpio-moxart.c
index c3ab46e595dafc..abd8676ce2b69d 100644
--- a/drivers/gpio/gpio-moxart.c
+++ b/drivers/gpio/gpio-moxart.c
@@ -39,17 +39,6 @@ static void moxart_gpio_free(struct gpio_chip *chip, unsigned offset)
 	pinctrl_free_gpio(offset);
 }
 
-static int moxart_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct bgpio_chip *bgc = to_bgpio_chip(chip);
-	u32 ret = bgc->read_reg(bgc->reg_dir);
-
-	if (ret & BIT(offset))
-		return !!(bgc->read_reg(bgc->reg_set) & BIT(offset));
-	else
-		return !!(bgc->read_reg(bgc->reg_dat) & BIT(offset));
-}
-
 static int moxart_gpio_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -68,8 +57,9 @@ static int moxart_gpio_probe(struct platform_device *pdev)
 		return PTR_ERR(base);
 
 	ret = bgpio_init(bgc, dev, 4, base + GPIO_DATA_IN,
-		    base + GPIO_DATA_OUT, NULL,
-		    base + GPIO_PIN_DIRECTION, NULL, 0);
+			 base + GPIO_DATA_OUT, NULL,
+			 base + GPIO_PIN_DIRECTION, NULL,
+			 BGPIOF_READ_OUTPUT_REG_SET);
 	if (ret) {
 		dev_err(&pdev->dev, "bgpio_init failed\n");
 		return ret;
@@ -78,7 +68,6 @@ static int moxart_gpio_probe(struct platform_device *pdev)
 	bgc->gc.label = "moxart-gpio";
 	bgc->gc.request = moxart_gpio_request;
 	bgc->gc.free = moxart_gpio_free;
-	bgc->gc.get = moxart_gpio_get;
 	bgc->data = bgc->read_reg(bgc->reg_set);
 	bgc->gc.base = 0;
 	bgc->gc.ngpio = 32;
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 9f7446a7ac64f0..7007036a4db85e 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -131,7 +131,7 @@ static struct mxc_gpio_hwdata *mxc_gpio_hwdata;
 #define GPIO_INT_FALL_EDGE	(mxc_gpio_hwdata->fall_edge)
 #define GPIO_INT_BOTH_EDGES	0x4
 
-static struct platform_device_id mxc_gpio_devtype[] = {
+static const struct platform_device_id mxc_gpio_devtype[] = {
 	{
 		.name = "imx1-gpio",
 		.driver_data = IMX1_GPIO,
@@ -450,7 +450,8 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 	err = bgpio_init(&port->bgc, &pdev->dev, 4,
 			 port->base + GPIO_PSR,
 			 port->base + GPIO_DR, NULL,
-			 port->base + GPIO_GDIR, NULL, 0);
+			 port->base + GPIO_GDIR, NULL,
+			 BGPIOF_READ_OUTPUT_REG_SET);
 	if (err)
 		goto out_bgio;
 
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index 84cbda6acdda79..150a3225aa412f 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -239,7 +239,7 @@ static int mxs_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
 	return !(dir & mask);
 }
 
-static struct platform_device_id mxs_gpio_ids[] = {
+static const struct platform_device_id mxs_gpio_ids[] = {
 	{
 		.name = "imx23-gpio",
 		.driver_data = IMX23_GPIO,
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index b232397ad7ec15..b0c57d505be75a 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -488,9 +488,6 @@ static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
 	unsigned long flags;
 	unsigned offset = d->hwirq;
 
-	if (!BANK_USED(bank))
-		pm_runtime_get_sync(bank->dev);
-
 	if (type & ~IRQ_TYPE_SENSE_MASK)
 		return -EINVAL;
 
@@ -498,12 +495,18 @@ static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
 		(type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
 		return -EINVAL;
 
+	if (!BANK_USED(bank))
+		pm_runtime_get_sync(bank->dev);
+
 	spin_lock_irqsave(&bank->lock, flags);
 	retval = omap_set_gpio_triggering(bank, offset, type);
+	if (retval)
+		goto error;
 	omap_gpio_init_irq(bank, offset);
 	if (!omap_gpio_is_input(bank, offset)) {
 		spin_unlock_irqrestore(&bank->lock, flags);
-		return -EINVAL;
+		retval = -EINVAL;
+		goto error;
 	}
 	spin_unlock_irqrestore(&bank->lock, flags);
 
@@ -512,6 +515,11 @@ static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
 	else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
 		__irq_set_handler_locked(d->irq, handle_edge_irq);
 
+	return 0;
+
+error:
+	if (!BANK_USED(bank))
+		pm_runtime_put(bank->dev);
 	return retval;
 }
 
@@ -638,15 +646,6 @@ static int omap_set_gpio_wakeup(struct gpio_bank *bank, unsigned offset,
 	return 0;
 }
 
-static void omap_reset_gpio(struct gpio_bank *bank, unsigned offset)
-{
-	omap_set_gpio_direction(bank, offset, 1);
-	omap_set_gpio_irqenable(bank, offset, 0);
-	omap_clear_gpio_irqstatus(bank, offset);
-	omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
-	omap_clear_gpio_debounce(bank, offset);
-}
-
 /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
 static int omap_gpio_wake_enable(struct irq_data *d, unsigned int enable)
 {
@@ -669,14 +668,7 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
 		pm_runtime_get_sync(bank->dev);
 
 	spin_lock_irqsave(&bank->lock, flags);
-	/* Set trigger to none. You need to enable the desired trigger with
-	 * request_irq() or set_irq_type(). Only do this if the IRQ line has
-	 * not already been requested.
-	 */
-	if (!LINE_USED(bank->irq_usage, offset)) {
-		omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
-		omap_enable_gpio_module(bank, offset);
-	}
+	omap_enable_gpio_module(bank, offset);
 	bank->mod_usage |= BIT(offset);
 	spin_unlock_irqrestore(&bank->lock, flags);
 
@@ -690,8 +682,11 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 
 	spin_lock_irqsave(&bank->lock, flags);
 	bank->mod_usage &= ~(BIT(offset));
+	if (!LINE_USED(bank->irq_usage, offset)) {
+		omap_set_gpio_direction(bank, offset, 1);
+		omap_clear_gpio_debounce(bank, offset);
+	}
 	omap_disable_gpio_module(bank, offset);
-	omap_reset_gpio(bank, offset);
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	/*
@@ -795,11 +790,23 @@ static unsigned int omap_gpio_irq_startup(struct irq_data *d)
 		pm_runtime_get_sync(bank->dev);
 
 	spin_lock_irqsave(&bank->lock, flags);
-	omap_gpio_init_irq(bank, offset);
+
+	if (!LINE_USED(bank->mod_usage, offset))
+		omap_set_gpio_direction(bank, offset, 1);
+	else if (!omap_gpio_is_input(bank, offset))
+		goto err;
+	omap_enable_gpio_module(bank, offset);
+	bank->irq_usage |= BIT(offset);
+
 	spin_unlock_irqrestore(&bank->lock, flags);
 	omap_gpio_unmask_irq(d);
 
 	return 0;
+err:
+	spin_unlock_irqrestore(&bank->lock, flags);
+	if (!BANK_USED(bank))
+		pm_runtime_put(bank->dev);
+	return -EINVAL;
 }
 
 static void omap_gpio_irq_shutdown(struct irq_data *d)
@@ -810,8 +817,12 @@ static void omap_gpio_irq_shutdown(struct irq_data *d)
 
 	spin_lock_irqsave(&bank->lock, flags);
 	bank->irq_usage &= ~(BIT(offset));
+	omap_set_gpio_irqenable(bank, offset, 0);
+	omap_clear_gpio_irqstatus(bank, offset);
+	omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+	if (!LINE_USED(bank->mod_usage, offset))
+		omap_clear_gpio_debounce(bank, offset);
 	omap_disable_gpio_module(bank, offset);
-	omap_reset_gpio(bank, offset);
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	/*
@@ -1233,6 +1244,17 @@ static int omap_gpio_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static int omap_gpio_remove(struct platform_device *pdev)
+{
+	struct gpio_bank *bank = platform_get_drvdata(pdev);
+
+	list_del(&bank->node);
+	gpiochip_remove(&bank->chip);
+	pm_runtime_disable(bank->dev);
+
+	return 0;
+}
+
 #ifdef CONFIG_ARCH_OMAP2PLUS
 
 #if defined(CONFIG_PM)
@@ -1418,6 +1440,7 @@ static int omap_gpio_runtime_resume(struct device *dev)
 }
 #endif /* CONFIG_PM */
 
+#if IS_BUILTIN(CONFIG_GPIO_OMAP)
 void omap2_gpio_prepare_for_idle(int pwr_mode)
 {
 	struct gpio_bank *bank;
@@ -1443,6 +1466,7 @@ void omap2_gpio_resume_after_idle(void)
 		pm_runtime_get_sync(bank->dev);
 	}
 }
+#endif
 
 #if defined(CONFIG_PM)
 static void omap_gpio_init_context(struct gpio_bank *p)
@@ -1598,6 +1622,7 @@ MODULE_DEVICE_TABLE(of, omap_gpio_match);
 
 static struct platform_driver omap_gpio_driver = {
 	.probe		= omap_gpio_probe,
+	.remove		= omap_gpio_remove,
 	.driver		= {
 		.name	= "omap_gpio",
 		.pm	= &gpio_pm_ops,
@@ -1615,3 +1640,13 @@ static int __init omap_gpio_drv_reg(void)
 	return platform_driver_register(&omap_gpio_driver);
 }
 postcore_initcall(omap_gpio_drv_reg);
+
+static void __exit omap_gpio_exit(void)
+{
+	platform_driver_unregister(&omap_gpio_driver);
+}
+module_exit(omap_gpio_exit);
+
+MODULE_DESCRIPTION("omap gpio driver");
+MODULE_ALIAS("platform:gpio-omap");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index e2da64abbccd9a..d233eb3b813233 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -443,12 +443,13 @@ static struct irq_chip pca953x_irq_chip = {
 	.irq_set_type		= pca953x_irq_set_type,
 };
 
-static u8 pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
+static bool pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
 {
 	u8 cur_stat[MAX_BANK];
 	u8 old_stat[MAX_BANK];
-	u8 pendings = 0;
-	u8 trigger[MAX_BANK], triggers = 0;
+	bool pending_seen = false;
+	bool trigger_seen = false;
+	u8 trigger[MAX_BANK];
 	int ret, i, offset = 0;
 
 	switch (chip->chip_type) {
@@ -461,7 +462,7 @@ static u8 pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
 	}
 	ret = pca953x_read_regs(chip, offset, cur_stat);
 	if (ret)
-		return 0;
+		return false;
 
 	/* Remove output pins from the equation */
 	for (i = 0; i < NBANK(chip); i++)
@@ -471,11 +472,12 @@ static u8 pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
 
 	for (i = 0; i < NBANK(chip); i++) {
 		trigger[i] = (cur_stat[i] ^ old_stat[i]) & chip->irq_mask[i];
-		triggers += trigger[i];
+		if (trigger[i])
+			trigger_seen = true;
 	}
 
-	if (!triggers)
-		return 0;
+	if (!trigger_seen)
+		return false;
 
 	memcpy(chip->irq_stat, cur_stat, NBANK(chip));
 
@@ -483,10 +485,11 @@ static u8 pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending)
 		pending[i] = (old_stat[i] & chip->irq_trig_fall[i]) |
 			(cur_stat[i] & chip->irq_trig_raise[i]);
 		pending[i] &= trigger[i];
-		pendings += pending[i];
+		if (pending[i])
+			pending_seen = true;
 	}
 
-	return pendings;
+	return pending_seen;
 }
 
 static irqreturn_t pca953x_irq_handler(int irq, void *devid)
@@ -630,7 +633,7 @@ static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
 		memset(val, 0, NBANK(chip));
 	pca953x_write_regs(chip, PCA957X_INVRT, val);
 
-	/* To enable register 6, 7 to controll pull up and pull down */
+	/* To enable register 6, 7 to control pull up and pull down */
 	memset(val, 0x02, NBANK(chip));
 	pca953x_write_regs(chip, PCA957X_BKEN, val);
 
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index 945f0cda8529d3..83db0e19ec7e6b 100644
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -91,6 +91,7 @@ struct pcf857x {
 	spinlock_t		slock;		/* protect irq demux */
 	unsigned		out;		/* software latch */
 	unsigned		status;		/* current status */
+	unsigned int		irq_parent;
 
 	int (*write)(struct i2c_client *client, unsigned data);
 	int (*read)(struct i2c_client *client);
@@ -217,9 +218,19 @@ static unsigned int noop_ret(struct irq_data *data)
 static int pcf857x_irq_set_wake(struct irq_data *data, unsigned int on)
 {
 	struct pcf857x *gpio = irq_data_get_irq_chip_data(data);
+	int error = 0;
+
+	if (gpio->irq_parent) {
+		error = irq_set_irq_wake(gpio->irq_parent, on);
+		if (error) {
+			dev_dbg(&gpio->client->dev,
+				"irq %u doesn't support irq_set_wake\n",
+				gpio->irq_parent);
+			gpio->irq_parent = 0;
+		}
+	}
 
-	irq_set_irq_wake(gpio->client->irq, on);
-	return 0;
+	return error;
 }
 
 static struct irq_chip pcf857x_irq_chip = {
@@ -364,6 +375,7 @@ static int pcf857x_probe(struct i2c_client *client,
 
 		gpiochip_set_chained_irqchip(&gpio->chip, &pcf857x_irq_chip,
 					     client->irq, NULL);
+		gpio->irq_parent = client->irq;
 	}
 
 	/* Let platform code set up the GPIOs and their users.
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index fd39774659484f..1e14a6c74ed139 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -177,8 +177,17 @@ static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on)
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct gpio_rcar_priv *p = container_of(gc, struct gpio_rcar_priv,
 						gpio_chip);
-
-	irq_set_irq_wake(p->irq_parent, on);
+	int error;
+
+	if (p->irq_parent) {
+		error = irq_set_irq_wake(p->irq_parent, on);
+		if (error) {
+			dev_dbg(&p->pdev->dev,
+				"irq %u doesn't support irq_set_wake\n",
+				p->irq_parent);
+			p->irq_parent = 0;
+		}
+	}
 
 	if (!p->clk)
 		return 0;
diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c
index 202361eb72797a..81bdbe7ba2a4bc 100644
--- a/drivers/gpio/gpio-stp-xway.c
+++ b/drivers/gpio/gpio-stp-xway.c
@@ -58,7 +58,7 @@
 #define XWAY_STP_ADSL_MASK	0x3
 
 /* 2 groups of 3 bits can be driven by the phys */
-#define XWAY_STP_PHY_MASK	0x3
+#define XWAY_STP_PHY_MASK	0x7
 #define XWAY_STP_PHY1_SHIFT	27
 #define XWAY_STP_PHY2_SHIFT	15
 
@@ -200,7 +200,7 @@ static int xway_stp_hw_init(struct xway_stp *chip)
 static int xway_stp_probe(struct platform_device *pdev)
 {
 	struct resource *res;
-	const __be32 *shadow, *groups, *dsl, *phy;
+	u32 shadow, groups, dsl, phy;
 	struct xway_stp *chip;
 	struct clk *clk;
 	int ret = 0;
@@ -223,33 +223,28 @@ static int xway_stp_probe(struct platform_device *pdev)
 	chip->gc.owner = THIS_MODULE;
 
 	/* store the shadow value if one was passed by the devicetree */
-	shadow = of_get_property(pdev->dev.of_node, "lantiq,shadow", NULL);
-	if (shadow)
-		chip->shadow = be32_to_cpu(*shadow);
+	if (!of_property_read_u32(pdev->dev.of_node, "lantiq,shadow", &shadow))
+		chip->shadow = shadow;
 
 	/* find out which gpio groups should be enabled */
-	groups = of_get_property(pdev->dev.of_node, "lantiq,groups", NULL);
-	if (groups)
-		chip->groups = be32_to_cpu(*groups) & XWAY_STP_GROUP_MASK;
+	if (!of_property_read_u32(pdev->dev.of_node, "lantiq,groups", &groups))
+		chip->groups = groups & XWAY_STP_GROUP_MASK;
 	else
 		chip->groups = XWAY_STP_GROUP0;
 	chip->gc.ngpio = fls(chip->groups) * 8;
 
 	/* find out which gpios are controlled by the dsl core */
-	dsl = of_get_property(pdev->dev.of_node, "lantiq,dsl", NULL);
-	if (dsl)
-		chip->dsl = be32_to_cpu(*dsl) & XWAY_STP_ADSL_MASK;
+	if (!of_property_read_u32(pdev->dev.of_node, "lantiq,dsl", &dsl))
+		chip->dsl = dsl & XWAY_STP_ADSL_MASK;
 
 	/* find out which gpios are controlled by the phys */
 	if (of_machine_is_compatible("lantiq,ar9") ||
 			of_machine_is_compatible("lantiq,gr9") ||
 			of_machine_is_compatible("lantiq,vr9")) {
-		phy = of_get_property(pdev->dev.of_node, "lantiq,phy1", NULL);
-		if (phy)
-			chip->phy1 = be32_to_cpu(*phy) & XWAY_STP_PHY_MASK;
-		phy = of_get_property(pdev->dev.of_node, "lantiq,phy2", NULL);
-		if (phy)
-			chip->phy2 = be32_to_cpu(*phy) & XWAY_STP_PHY_MASK;
+		if (!of_property_read_u32(pdev->dev.of_node, "lantiq,phy1", &phy))
+			chip->phy1 = phy & XWAY_STP_PHY_MASK;
+		if (!of_property_read_u32(pdev->dev.of_node, "lantiq,phy2", &phy))
+			chip->phy2 = phy & XWAY_STP_PHY_MASK;
 	}
 
 	/* check which edge trigger we should use, default to a falling edge */
diff --git a/drivers/gpio/gpio-tb10x.c b/drivers/gpio/gpio-tb10x.c
index 46b89614aa9121..12c99d969b9836 100644
--- a/drivers/gpio/gpio-tb10x.c
+++ b/drivers/gpio/gpio-tb10x.c
@@ -292,7 +292,6 @@ static int tb10x_gpio_remove(struct platform_device *pdev)
 					BIT(tb10x_gpio->gc.ngpio) - 1, 0, 0);
 		kfree(tb10x_gpio->domain->gc);
 		irq_domain_remove(tb10x_gpio->domain);
-		free_irq(tb10x_gpio->irq, tb10x_gpio);
 	}
 	gpiochip_remove(&tb10x_gpio->gc);
 
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 1741981d53c8fc..a19f81a661b485 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -288,7 +288,7 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 			tegra_gpio_writel(1 << pin, GPIO_INT_CLR(gpio));
 
 			/* if gpio is edge triggered, clear condition
-			 * before executing the hander so that we don't
+			 * before executing the handler so that we don't
 			 * miss edges
 			 */
 			if (lvl & (0x100 << pin)) {
diff --git a/drivers/gpio/gpio-ts5500.c b/drivers/gpio/gpio-ts5500.c
index 92fbabd8287955..b29a102d136b0a 100644
--- a/drivers/gpio/gpio-ts5500.c
+++ b/drivers/gpio/gpio-ts5500.c
@@ -440,7 +440,7 @@ static int ts5500_dio_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_device_id ts5500_dio_ids[] = {
+static const struct platform_device_id ts5500_dio_ids[] = {
 	{ "ts5500-dio1", TS5500_DIO1 },
 	{ "ts5500-dio2", TS5500_DIO2 },
 	{ "ts5500-dio-lcd", TS5500_LCD },
diff --git a/drivers/gpio/gpio-xgene-sb.c b/drivers/gpio/gpio-xgene-sb.c
index fb9d29a5d584c0..d57068b9083e10 100644
--- a/drivers/gpio/gpio-xgene-sb.c
+++ b/drivers/gpio/gpio-xgene-sb.c
@@ -25,8 +25,11 @@
 #include <linux/of_gpio.h>
 #include <linux/gpio.h>
 #include <linux/gpio/driver.h>
+#include <linux/acpi.h>
 #include <linux/basic_mmio_gpio.h>
 
+#include "gpiolib.h"
+
 #define XGENE_MAX_GPIO_DS		22
 #define XGENE_MAX_GPIO_DS_IRQ		6
 
@@ -112,7 +115,6 @@ static int xgene_gpio_sb_probe(struct platform_device *pdev)
 				   GFP_KERNEL);
 	if (!priv->irq)
 		return -ENOMEM;
-	memset(priv->irq, 0, sizeof(u32) * XGENE_MAX_GPIO_DS);
 
 	for (i = 0; i < priv->nirq; i++) {
 		priv->irq[default_lines[i]] = platform_get_irq(pdev, i);
@@ -129,6 +131,11 @@ static int xgene_gpio_sb_probe(struct platform_device *pdev)
 	else
 		dev_info(&pdev->dev, "X-Gene GPIO Standby driver registered\n");
 
+	if (priv->nirq > 0) {
+		/* Register interrupt handlers for gpio signaled acpi events */
+		acpi_gpiochip_request_interrupts(&priv->bgc.gc);
+	}
+
 	return ret;
 }
 
@@ -136,6 +143,10 @@ static int xgene_gpio_sb_remove(struct platform_device *pdev)
 {
 	struct xgene_gpio_sb *priv = platform_get_drvdata(pdev);
 
+	if (priv->nirq > 0) {
+		acpi_gpiochip_free_interrupts(&priv->bgc.gc);
+	}
+
 	return bgpio_remove(&priv->bgc);
 }
 
@@ -145,10 +156,19 @@ static const struct of_device_id xgene_gpio_sb_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, xgene_gpio_sb_of_match);
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xgene_gpio_sb_acpi_match[] = {
+	{"APMC0D15", 0},
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, xgene_gpio_sb_acpi_match);
+#endif
+
 static struct platform_driver xgene_gpio_sb_driver = {
 	.driver = {
 		   .name = "xgene-gpio-sb",
 		   .of_match_table = xgene_gpio_sb_of_match,
+		   .acpi_match_table = ACPI_PTR(xgene_gpio_sb_acpi_match),
 		   },
 	.probe = xgene_gpio_sb_probe,
 	.remove = xgene_gpio_sb_remove,
diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
index 61243d17774029..77fe5d3cb105b9 100644
--- a/drivers/gpio/gpio-xilinx.c
+++ b/drivers/gpio/gpio-xilinx.c
@@ -41,10 +41,10 @@
 /**
  * struct xgpio_instance - Stores information about GPIO device
  * @mmchip: OF GPIO chip for memory mapped banks
+ * @gpio_width: GPIO width for every channel
  * @gpio_state: GPIO state shadow register
  * @gpio_dir: GPIO direction shadow register
  * @gpio_lock: Lock used for synchronization
- * @inited: True if the port has been inited
  */
 struct xgpio_instance {
 	struct of_mm_gpio_chip mmchip;
@@ -231,6 +231,8 @@ static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc)
  * @pdev: pointer to the platform device
  *
  * This function remove gpiochips and frees all the allocated resources.
+ *
+ * Return: 0 always
  */
 static int xgpio_remove(struct platform_device *pdev)
 {
diff --git a/drivers/gpio/gpio-xlp.c b/drivers/gpio/gpio-xlp.c
new file mode 100644
index 00000000000000..9bdab7203d6515
--- /dev/null
+++ b/drivers/gpio/gpio-xlp.c
@@ -0,0 +1,427 @@
+/*
+ * Copyright (C) 2003-2015 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+/*
+ * XLP GPIO has multiple 32 bit registers for each feature where each register
+ * controls 32 pins. So, pins up to 64 require 2 32-bit registers and up to 96
+ * require 3 32-bit registers for each feature.
+ * Here we only define offset of the first register for each feature. Offset of
+ * the registers for pins greater than 32 can be calculated as following(Use
+ * GPIO_INT_STAT as example):
+ *
+ * offset = (gpio / XLP_GPIO_REGSZ) * 4;
+ * reg_addr = addr + offset;
+ *
+ * where addr is base address of the that feature register and gpio is the pin.
+ */
+#define GPIO_OUTPUT_EN		0x00
+#define GPIO_PADDRV		0x08
+#define GPIO_INT_EN00		0x18
+#define GPIO_INT_EN10		0x20
+#define GPIO_INT_EN20		0x28
+#define GPIO_INT_EN30		0x30
+#define GPIO_INT_POL		0x38
+#define GPIO_INT_TYPE		0x40
+#define GPIO_INT_STAT		0x48
+
+#define GPIO_9XX_BYTESWAP	0X00
+#define GPIO_9XX_CTRL		0X04
+#define GPIO_9XX_OUTPUT_EN	0x14
+#define GPIO_9XX_PADDRV		0x24
+/*
+ * Only for 4 interrupt enable reg are defined for now,
+ * total reg available are 12.
+ */
+#define GPIO_9XX_INT_EN00	0x44
+#define GPIO_9XX_INT_EN10	0x54
+#define GPIO_9XX_INT_EN20	0x64
+#define GPIO_9XX_INT_EN30	0x74
+#define GPIO_9XX_INT_POL	0x104
+#define GPIO_9XX_INT_TYPE	0x114
+#define GPIO_9XX_INT_STAT	0x124
+
+#define GPIO_3XX_INT_EN00	0x18
+#define GPIO_3XX_INT_EN10	0x20
+#define GPIO_3XX_INT_EN20	0x28
+#define GPIO_3XX_INT_EN30	0x30
+#define GPIO_3XX_INT_POL	0x78
+#define GPIO_3XX_INT_TYPE	0x80
+#define GPIO_3XX_INT_STAT	0x88
+
+/* Interrupt type register mask */
+#define XLP_GPIO_IRQ_TYPE_LVL	0x0
+#define XLP_GPIO_IRQ_TYPE_EDGE	0x1
+
+/* Interrupt polarity register mask */
+#define XLP_GPIO_IRQ_POL_HIGH	0x0
+#define XLP_GPIO_IRQ_POL_LOW	0x1
+
+#define XLP_GPIO_REGSZ		32
+#define XLP_GPIO_IRQ_BASE	768
+#define XLP_MAX_NR_GPIO		96
+
+/* XLP variants supported by this driver */
+enum {
+	XLP_GPIO_VARIANT_XLP832 = 1,
+	XLP_GPIO_VARIANT_XLP316,
+	XLP_GPIO_VARIANT_XLP208,
+	XLP_GPIO_VARIANT_XLP980,
+	XLP_GPIO_VARIANT_XLP532
+};
+
+struct xlp_gpio_priv {
+	struct gpio_chip chip;
+	DECLARE_BITMAP(gpio_enabled_mask, XLP_MAX_NR_GPIO);
+	void __iomem *gpio_intr_en;	/* pointer to first intr enable reg */
+	void __iomem *gpio_intr_stat;	/* pointer to first intr status reg */
+	void __iomem *gpio_intr_type;	/* pointer to first intr type reg */
+	void __iomem *gpio_intr_pol;	/* pointer to first intr polarity reg */
+	void __iomem *gpio_out_en;	/* pointer to first output enable reg */
+	void __iomem *gpio_paddrv;	/* pointer to first pad drive reg */
+	spinlock_t lock;
+};
+
+static struct xlp_gpio_priv *gpio_chip_to_xlp_priv(struct gpio_chip *gc)
+{
+	return container_of(gc, struct xlp_gpio_priv, chip);
+}
+
+static int xlp_gpio_get_reg(void __iomem *addr, unsigned gpio)
+{
+	u32 pos, regset;
+
+	pos = gpio % XLP_GPIO_REGSZ;
+	regset = (gpio / XLP_GPIO_REGSZ) * 4;
+	return !!(readl(addr + regset) & BIT(pos));
+}
+
+static void xlp_gpio_set_reg(void __iomem *addr, unsigned gpio, int state)
+{
+	u32 value, pos, regset;
+
+	pos = gpio % XLP_GPIO_REGSZ;
+	regset = (gpio / XLP_GPIO_REGSZ) * 4;
+	value = readl(addr + regset);
+
+	if (state)
+		value |= BIT(pos);
+	else
+		value &= ~BIT(pos);
+
+	writel(value, addr + regset);
+}
+
+static void xlp_gpio_irq_disable(struct irq_data *d)
+{
+	struct gpio_chip *gc  = irq_data_get_irq_chip_data(d);
+	struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
+	__clear_bit(d->hwirq, priv->gpio_enabled_mask);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void xlp_gpio_irq_mask_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc  = irq_data_get_irq_chip_data(d);
+	struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
+	xlp_gpio_set_reg(priv->gpio_intr_stat, d->hwirq, 0x1);
+	__clear_bit(d->hwirq, priv->gpio_enabled_mask);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void xlp_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc  = irq_data_get_irq_chip_data(d);
+	struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x1);
+	__set_bit(d->hwirq, priv->gpio_enabled_mask);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int xlp_gpio_set_irq_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc  = irq_data_get_irq_chip_data(d);
+	struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+	int pol, irq_type;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
+		pol = XLP_GPIO_IRQ_POL_HIGH;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
+		pol = XLP_GPIO_IRQ_POL_LOW;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		irq_type = XLP_GPIO_IRQ_TYPE_LVL;
+		pol = XLP_GPIO_IRQ_POL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		irq_type = XLP_GPIO_IRQ_TYPE_LVL;
+		pol = XLP_GPIO_IRQ_POL_LOW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	xlp_gpio_set_reg(priv->gpio_intr_type, d->hwirq, irq_type);
+	xlp_gpio_set_reg(priv->gpio_intr_pol, d->hwirq, pol);
+
+	return 0;
+}
+
+static struct irq_chip xlp_gpio_irq_chip = {
+	.name		= "XLP-GPIO",
+	.irq_mask_ack	= xlp_gpio_irq_mask_ack,
+	.irq_disable	= xlp_gpio_irq_disable,
+	.irq_set_type	= xlp_gpio_set_irq_type,
+	.irq_unmask	= xlp_gpio_irq_unmask,
+	.flags		= IRQCHIP_ONESHOT_SAFE,
+};
+
+static irqreturn_t xlp_gpio_generic_handler(int irq, void *data)
+{
+	struct xlp_gpio_priv *priv = data;
+	int gpio, regoff;
+	u32 gpio_stat;
+
+	regoff = -1;
+	gpio_stat = 0;
+	for_each_set_bit(gpio, priv->gpio_enabled_mask, XLP_MAX_NR_GPIO) {
+		if (regoff != gpio / XLP_GPIO_REGSZ) {
+			regoff = gpio / XLP_GPIO_REGSZ;
+			gpio_stat = readl(priv->gpio_intr_stat + regoff * 4);
+		}
+		if (gpio_stat & BIT(gpio % XLP_GPIO_REGSZ))
+			generic_handle_irq(irq_find_mapping(
+						priv->chip.irqdomain, gpio));
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int xlp_gpio_dir_output(struct gpio_chip *gc, unsigned gpio, int state)
+{
+	struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+
+	BUG_ON(gpio >= gc->ngpio);
+	xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x1);
+
+	return 0;
+}
+
+static int xlp_gpio_dir_input(struct gpio_chip *gc, unsigned gpio)
+{
+	struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+
+	BUG_ON(gpio >= gc->ngpio);
+	xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x0);
+
+	return 0;
+}
+
+static int xlp_gpio_get(struct gpio_chip *gc, unsigned gpio)
+{
+	struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+
+	BUG_ON(gpio >= gc->ngpio);
+	return xlp_gpio_get_reg(priv->gpio_paddrv, gpio);
+}
+
+static void xlp_gpio_set(struct gpio_chip *gc, unsigned gpio, int state)
+{
+	struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
+
+	BUG_ON(gpio >= gc->ngpio);
+	xlp_gpio_set_reg(priv->gpio_paddrv, gpio, state);
+}
+
+static const struct of_device_id xlp_gpio_of_ids[] = {
+	{
+		.compatible = "netlogic,xlp832-gpio",
+		.data	    = (void *)XLP_GPIO_VARIANT_XLP832,
+	},
+	{
+		.compatible = "netlogic,xlp316-gpio",
+		.data	    = (void *)XLP_GPIO_VARIANT_XLP316,
+	},
+	{
+		.compatible = "netlogic,xlp208-gpio",
+		.data	    = (void *)XLP_GPIO_VARIANT_XLP208,
+	},
+	{
+		.compatible = "netlogic,xlp980-gpio",
+		.data	    = (void *)XLP_GPIO_VARIANT_XLP980,
+	},
+	{
+		.compatible = "netlogic,xlp532-gpio",
+		.data	    = (void *)XLP_GPIO_VARIANT_XLP532,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, xlp_gpio_of_ids);
+
+static int xlp_gpio_probe(struct platform_device *pdev)
+{
+	struct gpio_chip *gc;
+	struct resource *iores;
+	struct xlp_gpio_priv *priv;
+	const struct of_device_id *of_id;
+	void __iomem *gpio_base;
+	int irq_base, irq, err;
+	int ngpio;
+	u32 soc_type;
+
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iores)
+		return -ENODEV;
+
+	priv = devm_kzalloc(&pdev->dev,	sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	gpio_base = devm_ioremap_resource(&pdev->dev, iores);
+	if (IS_ERR(gpio_base))
+		return PTR_ERR(gpio_base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	of_id = of_match_device(xlp_gpio_of_ids, &pdev->dev);
+	if (!of_id) {
+		dev_err(&pdev->dev, "Failed to get soc type!\n");
+		return -ENODEV;
+	}
+
+	soc_type = (uintptr_t) of_id->data;
+
+	switch (soc_type) {
+	case XLP_GPIO_VARIANT_XLP832:
+		priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
+		priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
+		priv->gpio_intr_stat = gpio_base + GPIO_INT_STAT;
+		priv->gpio_intr_type = gpio_base + GPIO_INT_TYPE;
+		priv->gpio_intr_pol = gpio_base + GPIO_INT_POL;
+		priv->gpio_intr_en = gpio_base + GPIO_INT_EN00;
+		ngpio = 41;
+		break;
+	case XLP_GPIO_VARIANT_XLP208:
+	case XLP_GPIO_VARIANT_XLP316:
+		priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
+		priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
+		priv->gpio_intr_stat = gpio_base + GPIO_3XX_INT_STAT;
+		priv->gpio_intr_type = gpio_base + GPIO_3XX_INT_TYPE;
+		priv->gpio_intr_pol = gpio_base + GPIO_3XX_INT_POL;
+		priv->gpio_intr_en = gpio_base + GPIO_3XX_INT_EN00;
+
+		ngpio = (soc_type == XLP_GPIO_VARIANT_XLP208) ? 42 : 57;
+		break;
+	case XLP_GPIO_VARIANT_XLP980:
+	case XLP_GPIO_VARIANT_XLP532:
+		priv->gpio_out_en = gpio_base + GPIO_9XX_OUTPUT_EN;
+		priv->gpio_paddrv = gpio_base + GPIO_9XX_PADDRV;
+		priv->gpio_intr_stat = gpio_base + GPIO_9XX_INT_STAT;
+		priv->gpio_intr_type = gpio_base + GPIO_9XX_INT_TYPE;
+		priv->gpio_intr_pol = gpio_base + GPIO_9XX_INT_POL;
+		priv->gpio_intr_en = gpio_base + GPIO_9XX_INT_EN00;
+
+		ngpio = (soc_type == XLP_GPIO_VARIANT_XLP980) ? 66 : 67;
+		break;
+	default:
+		dev_err(&pdev->dev, "Unknown Processor type!\n");
+		return -ENODEV;
+	}
+
+	bitmap_zero(priv->gpio_enabled_mask, XLP_MAX_NR_GPIO);
+
+	gc = &priv->chip;
+
+	gc->owner = THIS_MODULE;
+	gc->label = dev_name(&pdev->dev);
+	gc->base = 0;
+	gc->dev = &pdev->dev;
+	gc->ngpio = ngpio;
+	gc->of_node = pdev->dev.of_node;
+	gc->direction_output = xlp_gpio_dir_output;
+	gc->direction_input = xlp_gpio_dir_input;
+	gc->set = xlp_gpio_set;
+	gc->get = xlp_gpio_get;
+
+	spin_lock_init(&priv->lock);
+
+	err = devm_request_irq(&pdev->dev, irq, xlp_gpio_generic_handler,
+			IRQ_TYPE_NONE, pdev->name, priv);
+	if (err)
+		return err;
+
+	irq_base = irq_alloc_descs(-1, XLP_GPIO_IRQ_BASE, gc->ngpio, 0);
+	if (irq_base < 0) {
+		dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n");
+		return err;
+	}
+
+	err = gpiochip_add(gc);
+	if (err < 0)
+		goto out_free_desc;
+
+	err = gpiochip_irqchip_add(gc, &xlp_gpio_irq_chip, irq_base,
+				handle_level_irq, IRQ_TYPE_NONE);
+	if (err) {
+		dev_err(&pdev->dev, "Could not connect irqchip to gpiochip!\n");
+		goto out_gpio_remove;
+	}
+
+	dev_info(&pdev->dev, "registered %d GPIOs\n", gc->ngpio);
+
+	return 0;
+
+out_gpio_remove:
+	gpiochip_remove(gc);
+out_free_desc:
+	irq_free_descs(irq_base, gc->ngpio);
+	return err;
+}
+
+static struct platform_driver xlp_gpio_driver = {
+	.driver		= {
+		.name	= "xlp-gpio",
+		.of_match_table = xlp_gpio_of_ids,
+	},
+	.probe		= xlp_gpio_probe,
+};
+module_platform_driver(xlp_gpio_driver);
+
+MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>");
+MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@broadcom.com>");
+MODULE_DESCRIPTION("Netlogic XLP GPIO Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index 184c4b1b255800..0d9663f538344a 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -335,7 +335,7 @@ static void zynq_gpio_irq_ack(struct irq_data *irq_data)
  * @irq_data:	irq data containing irq number of gpio pin for the interrupt
  *		to enable
  *
- * Clears the INTSTS bit and unmasks the given interrrupt.
+ * Clears the INTSTS bit and unmasks the given interrupt.
  */
 static void zynq_gpio_irq_enable(struct irq_data *irq_data)
 {
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 725d16138b740e..19b99d0c2bf008 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -514,6 +514,35 @@ struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
 	return lookup.desc ? lookup.desc : ERR_PTR(-ENOENT);
 }
 
+/**
+ * acpi_dev_gpio_irq_get() - Find GpioInt and translate it to Linux IRQ number
+ * @adev: pointer to a ACPI device to get IRQ from
+ * @index: index of GpioInt resource (starting from %0)
+ *
+ * If the device has one or more GpioInt resources, this function can be
+ * used to translate from the GPIO offset in the resource to the Linux IRQ
+ * number.
+ *
+ * Return: Linux IRQ number (>%0) on success, negative errno on failure.
+ */
+int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
+{
+	int idx, i;
+
+	for (i = 0, idx = 0; idx <= index; i++) {
+		struct acpi_gpio_info info;
+		struct gpio_desc *desc;
+
+		desc = acpi_get_gpiod_by_index(adev, NULL, i, &info);
+		if (IS_ERR(desc))
+			break;
+		if (info.gpioint && idx++ == index)
+			return gpiod_to_irq(desc);
+	}
+	return -ENOENT;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_gpio_irq_get);
+
 static acpi_status
 acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 			    u32 bits, u64 *value, void *handler_context,
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index a6c67c6b468045..9a0ec48a47375d 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -242,7 +242,7 @@ int of_gpio_simple_xlate(struct gpio_chip *gc,
 {
 	/*
 	 * We're discouraging gpio_cells < 2, since that way you'll have to
-	 * write your own xlate function (that will have to retrive the GPIO
+	 * write your own xlate function (that will have to retrieve the GPIO
 	 * number and the flags from a single gpio cell -- this is possible,
 	 * but not recommended).
 	 */
diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
index af3bc7a8033bdc..b57ed8e55ab5f6 100644
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -6,14 +6,29 @@
 #include <linux/gpio/driver.h>
 #include <linux/interrupt.h>
 #include <linux/kdev_t.h>
+#include <linux/slab.h>
 
 #include "gpiolib.h"
 
-static DEFINE_IDR(dirent_idr);
+#define GPIO_IRQF_TRIGGER_FALLING	BIT(0)
+#define GPIO_IRQF_TRIGGER_RISING	BIT(1)
+#define GPIO_IRQF_TRIGGER_BOTH		(GPIO_IRQF_TRIGGER_FALLING | \
+					 GPIO_IRQF_TRIGGER_RISING)
 
+struct gpiod_data {
+	struct gpio_desc *desc;
+
+	struct mutex mutex;
+	struct kernfs_node *value_kn;
+	int irq;
+	unsigned char irq_flags;
 
-/* lock protects against unexport_gpio() being called while
- * sysfs files are active.
+	bool direction_can_change;
+};
+
+/*
+ * Lock to serialise gpiod export and unexport, and prevent re-export of
+ * gpiod whose chip is being unregistered.
  */
 static DEFINE_MUTEX(sysfs_lock);
 
@@ -38,38 +53,35 @@ static DEFINE_MUTEX(sysfs_lock);
  *        /edge configuration
  */
 
-static ssize_t gpio_direction_show(struct device *dev,
+static ssize_t direction_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct gpio_desc	*desc = dev_get_drvdata(dev);
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	struct gpio_desc *desc = data->desc;
 	ssize_t			status;
 
-	mutex_lock(&sysfs_lock);
+	mutex_lock(&data->mutex);
 
-	if (!test_bit(FLAG_EXPORT, &desc->flags)) {
-		status = -EIO;
-	} else {
-		gpiod_get_direction(desc);
-		status = sprintf(buf, "%s\n",
+	gpiod_get_direction(desc);
+	status = sprintf(buf, "%s\n",
 			test_bit(FLAG_IS_OUT, &desc->flags)
 				? "out" : "in");
-	}
 
-	mutex_unlock(&sysfs_lock);
+	mutex_unlock(&data->mutex);
+
 	return status;
 }
 
-static ssize_t gpio_direction_store(struct device *dev,
+static ssize_t direction_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t size)
 {
-	struct gpio_desc	*desc = dev_get_drvdata(dev);
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	struct gpio_desc *desc = data->desc;
 	ssize_t			status;
 
-	mutex_lock(&sysfs_lock);
+	mutex_lock(&data->mutex);
 
-	if (!test_bit(FLAG_EXPORT, &desc->flags))
-		status = -EIO;
-	else if (sysfs_streq(buf, "high"))
+	if (sysfs_streq(buf, "high"))
 		status = gpiod_direction_output_raw(desc, 1);
 	else if (sysfs_streq(buf, "out") || sysfs_streq(buf, "low"))
 		status = gpiod_direction_output_raw(desc, 0);
@@ -78,43 +90,40 @@ static ssize_t gpio_direction_store(struct device *dev,
 	else
 		status = -EINVAL;
 
-	mutex_unlock(&sysfs_lock);
+	mutex_unlock(&data->mutex);
+
 	return status ? : size;
 }
+static DEVICE_ATTR_RW(direction);
 
-static /* const */ DEVICE_ATTR(direction, 0644,
-		gpio_direction_show, gpio_direction_store);
-
-static ssize_t gpio_value_show(struct device *dev,
+static ssize_t value_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct gpio_desc	*desc = dev_get_drvdata(dev);
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	struct gpio_desc *desc = data->desc;
 	ssize_t			status;
 
-	mutex_lock(&sysfs_lock);
+	mutex_lock(&data->mutex);
 
-	if (!test_bit(FLAG_EXPORT, &desc->flags))
-		status = -EIO;
-	else
-		status = sprintf(buf, "%d\n", gpiod_get_value_cansleep(desc));
+	status = sprintf(buf, "%d\n", gpiod_get_value_cansleep(desc));
+
+	mutex_unlock(&data->mutex);
 
-	mutex_unlock(&sysfs_lock);
 	return status;
 }
 
-static ssize_t gpio_value_store(struct device *dev,
+static ssize_t value_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t size)
 {
-	struct gpio_desc	*desc = dev_get_drvdata(dev);
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	struct gpio_desc *desc = data->desc;
 	ssize_t			status;
 
-	mutex_lock(&sysfs_lock);
+	mutex_lock(&data->mutex);
 
-	if (!test_bit(FLAG_EXPORT, &desc->flags))
-		status = -EIO;
-	else if (!test_bit(FLAG_IS_OUT, &desc->flags))
+	if (!test_bit(FLAG_IS_OUT, &desc->flags)) {
 		status = -EPERM;
-	else {
+	} else {
 		long		value;
 
 		status = kstrtol(buf, 0, &value);
@@ -124,172 +133,168 @@ static ssize_t gpio_value_store(struct device *dev,
 		}
 	}
 
-	mutex_unlock(&sysfs_lock);
+	mutex_unlock(&data->mutex);
+
 	return status;
 }
-
-static DEVICE_ATTR(value, 0644,
-		gpio_value_show, gpio_value_store);
+static DEVICE_ATTR_RW(value);
 
 static irqreturn_t gpio_sysfs_irq(int irq, void *priv)
 {
-	struct kernfs_node	*value_sd = priv;
+	struct gpiod_data *data = priv;
+
+	sysfs_notify_dirent(data->value_kn);
 
-	sysfs_notify_dirent(value_sd);
 	return IRQ_HANDLED;
 }
 
-static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev,
-		unsigned long gpio_flags)
+/* Caller holds gpiod-data mutex. */
+static int gpio_sysfs_request_irq(struct device *dev, unsigned char flags)
 {
-	struct kernfs_node	*value_sd;
+	struct gpiod_data	*data = dev_get_drvdata(dev);
+	struct gpio_desc	*desc = data->desc;
 	unsigned long		irq_flags;
-	int			ret, irq, id;
+	int			ret;
 
-	if ((desc->flags & GPIO_TRIGGER_MASK) == gpio_flags)
-		return 0;
-
-	irq = gpiod_to_irq(desc);
-	if (irq < 0)
+	data->irq = gpiod_to_irq(desc);
+	if (data->irq < 0)
 		return -EIO;
 
-	id = desc->flags >> ID_SHIFT;
-	value_sd = idr_find(&dirent_idr, id);
-	if (value_sd)
-		free_irq(irq, value_sd);
-
-	desc->flags &= ~GPIO_TRIGGER_MASK;
-
-	if (!gpio_flags) {
-		gpiochip_unlock_as_irq(desc->chip, gpio_chip_hwgpio(desc));
-		ret = 0;
-		goto free_id;
-	}
+	data->value_kn = sysfs_get_dirent(dev->kobj.sd, "value");
+	if (!data->value_kn)
+		return -ENODEV;
 
 	irq_flags = IRQF_SHARED;
-	if (test_bit(FLAG_TRIG_FALL, &gpio_flags))
+	if (flags & GPIO_IRQF_TRIGGER_FALLING)
 		irq_flags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
 			IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
-	if (test_bit(FLAG_TRIG_RISE, &gpio_flags))
+	if (flags & GPIO_IRQF_TRIGGER_RISING)
 		irq_flags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
 			IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
 
-	if (!value_sd) {
-		value_sd = sysfs_get_dirent(dev->kobj.sd, "value");
-		if (!value_sd) {
-			ret = -ENODEV;
-			goto err_out;
-		}
-
-		ret = idr_alloc(&dirent_idr, value_sd, 1, 0, GFP_KERNEL);
-		if (ret < 0)
-			goto free_sd;
-		id = ret;
-
-		desc->flags &= GPIO_FLAGS_MASK;
-		desc->flags |= (unsigned long)id << ID_SHIFT;
-
-		if (desc->flags >> ID_SHIFT != id) {
-			ret = -ERANGE;
-			goto free_id;
-		}
-	}
+	/*
+	 * FIXME: This should be done in the irq_request_resources callback
+	 *        when the irq is requested, but a few drivers currently fail
+	 *        to do so.
+	 *
+	 *        Remove this redundant call (along with the corresponding
+	 *        unlock) when those drivers have been fixed.
+	 */
+	ret = gpiochip_lock_as_irq(desc->chip, gpio_chip_hwgpio(desc));
+	if (ret < 0)
+		goto err_put_kn;
 
-	ret = request_any_context_irq(irq, gpio_sysfs_irq, irq_flags,
-				"gpiolib", value_sd);
+	ret = request_any_context_irq(data->irq, gpio_sysfs_irq, irq_flags,
+				"gpiolib", data);
 	if (ret < 0)
-		goto free_id;
+		goto err_unlock;
 
-	ret = gpiochip_lock_as_irq(desc->chip, gpio_chip_hwgpio(desc));
-	if (ret < 0) {
-		gpiod_warn(desc, "failed to flag the GPIO for IRQ\n");
-		goto free_id;
-	}
+	data->irq_flags = flags;
 
-	desc->flags |= gpio_flags;
 	return 0;
 
-free_id:
-	idr_remove(&dirent_idr, id);
-	desc->flags &= GPIO_FLAGS_MASK;
-free_sd:
-	if (value_sd)
-		sysfs_put(value_sd);
-err_out:
+err_unlock:
+	gpiochip_unlock_as_irq(desc->chip, gpio_chip_hwgpio(desc));
+err_put_kn:
+	sysfs_put(data->value_kn);
+
 	return ret;
 }
 
+/*
+ * Caller holds gpiod-data mutex (unless called after class-device
+ * deregistration).
+ */
+static void gpio_sysfs_free_irq(struct device *dev)
+{
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	struct gpio_desc *desc = data->desc;
+
+	data->irq_flags = 0;
+	free_irq(data->irq, data);
+	gpiochip_unlock_as_irq(desc->chip, gpio_chip_hwgpio(desc));
+	sysfs_put(data->value_kn);
+}
+
 static const struct {
 	const char *name;
-	unsigned long flags;
+	unsigned char flags;
 } trigger_types[] = {
 	{ "none",    0 },
-	{ "falling", BIT(FLAG_TRIG_FALL) },
-	{ "rising",  BIT(FLAG_TRIG_RISE) },
-	{ "both",    BIT(FLAG_TRIG_FALL) | BIT(FLAG_TRIG_RISE) },
+	{ "falling", GPIO_IRQF_TRIGGER_FALLING },
+	{ "rising",  GPIO_IRQF_TRIGGER_RISING },
+	{ "both",    GPIO_IRQF_TRIGGER_BOTH },
 };
 
-static ssize_t gpio_edge_show(struct device *dev,
+static ssize_t edge_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	const struct gpio_desc	*desc = dev_get_drvdata(dev);
-	ssize_t			status;
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	ssize_t	status = 0;
+	int i;
 
-	mutex_lock(&sysfs_lock);
-
-	if (!test_bit(FLAG_EXPORT, &desc->flags))
-		status = -EIO;
-	else {
-		int i;
+	mutex_lock(&data->mutex);
 
-		status = 0;
-		for (i = 0; i < ARRAY_SIZE(trigger_types); i++)
-			if ((desc->flags & GPIO_TRIGGER_MASK)
-					== trigger_types[i].flags) {
-				status = sprintf(buf, "%s\n",
-						 trigger_types[i].name);
-				break;
-			}
+	for (i = 0; i < ARRAY_SIZE(trigger_types); i++) {
+		if (data->irq_flags == trigger_types[i].flags) {
+			status = sprintf(buf, "%s\n", trigger_types[i].name);
+			break;
+		}
 	}
 
-	mutex_unlock(&sysfs_lock);
+	mutex_unlock(&data->mutex);
+
 	return status;
 }
 
-static ssize_t gpio_edge_store(struct device *dev,
+static ssize_t edge_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t size)
 {
-	struct gpio_desc	*desc = dev_get_drvdata(dev);
-	ssize_t			status;
-	int			i;
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	unsigned char flags;
+	ssize_t	status = size;
+	int i;
 
-	for (i = 0; i < ARRAY_SIZE(trigger_types); i++)
+	for (i = 0; i < ARRAY_SIZE(trigger_types); i++) {
 		if (sysfs_streq(trigger_types[i].name, buf))
-			goto found;
-	return -EINVAL;
+			break;
+	}
 
-found:
-	mutex_lock(&sysfs_lock);
+	if (i == ARRAY_SIZE(trigger_types))
+		return -EINVAL;
 
-	if (!test_bit(FLAG_EXPORT, &desc->flags))
-		status = -EIO;
-	else {
-		status = gpio_setup_irq(desc, dev, trigger_types[i].flags);
+	flags = trigger_types[i].flags;
+
+	mutex_lock(&data->mutex);
+
+	if (flags == data->irq_flags) {
+		status = size;
+		goto out_unlock;
+	}
+
+	if (data->irq_flags)
+		gpio_sysfs_free_irq(dev);
+
+	if (flags) {
+		status = gpio_sysfs_request_irq(dev, flags);
 		if (!status)
 			status = size;
 	}
 
-	mutex_unlock(&sysfs_lock);
+out_unlock:
+	mutex_unlock(&data->mutex);
 
 	return status;
 }
+static DEVICE_ATTR_RW(edge);
 
-static DEVICE_ATTR(edge, 0644, gpio_edge_show, gpio_edge_store);
-
-static int sysfs_set_active_low(struct gpio_desc *desc, struct device *dev,
-				int value)
+/* Caller holds gpiod-data mutex. */
+static int gpio_sysfs_set_active_low(struct device *dev, int value)
 {
+	struct gpiod_data	*data = dev_get_drvdata(dev);
+	struct gpio_desc	*desc = data->desc;
 	int			status = 0;
+	unsigned int		flags = data->irq_flags;
 
 	if (!!test_bit(FLAG_ACTIVE_LOW, &desc->flags) == !!value)
 		return 0;
@@ -300,69 +305,59 @@ static int sysfs_set_active_low(struct gpio_desc *desc, struct device *dev,
 		clear_bit(FLAG_ACTIVE_LOW, &desc->flags);
 
 	/* reconfigure poll(2) support if enabled on one edge only */
-	if (dev != NULL && (!!test_bit(FLAG_TRIG_RISE, &desc->flags) ^
-				!!test_bit(FLAG_TRIG_FALL, &desc->flags))) {
-		unsigned long trigger_flags = desc->flags & GPIO_TRIGGER_MASK;
-
-		gpio_setup_irq(desc, dev, 0);
-		status = gpio_setup_irq(desc, dev, trigger_flags);
+	if (flags == GPIO_IRQF_TRIGGER_FALLING ||
+					flags == GPIO_IRQF_TRIGGER_RISING) {
+		gpio_sysfs_free_irq(dev);
+		status = gpio_sysfs_request_irq(dev, flags);
 	}
 
 	return status;
 }
 
-static ssize_t gpio_active_low_show(struct device *dev,
+static ssize_t active_low_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	const struct gpio_desc	*desc = dev_get_drvdata(dev);
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	struct gpio_desc *desc = data->desc;
 	ssize_t			status;
 
-	mutex_lock(&sysfs_lock);
+	mutex_lock(&data->mutex);
 
-	if (!test_bit(FLAG_EXPORT, &desc->flags))
-		status = -EIO;
-	else
-		status = sprintf(buf, "%d\n",
+	status = sprintf(buf, "%d\n",
 				!!test_bit(FLAG_ACTIVE_LOW, &desc->flags));
 
-	mutex_unlock(&sysfs_lock);
+	mutex_unlock(&data->mutex);
 
 	return status;
 }
 
-static ssize_t gpio_active_low_store(struct device *dev,
+static ssize_t active_low_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t size)
 {
-	struct gpio_desc	*desc = dev_get_drvdata(dev);
+	struct gpiod_data	*data = dev_get_drvdata(dev);
 	ssize_t			status;
+	long			value;
 
-	mutex_lock(&sysfs_lock);
+	mutex_lock(&data->mutex);
 
-	if (!test_bit(FLAG_EXPORT, &desc->flags)) {
-		status = -EIO;
-	} else {
-		long		value;
+	status = kstrtol(buf, 0, &value);
+	if (status == 0)
+		status = gpio_sysfs_set_active_low(dev, value);
 
-		status = kstrtol(buf, 0, &value);
-		if (status == 0)
-			status = sysfs_set_active_low(desc, dev, value != 0);
-	}
-
-	mutex_unlock(&sysfs_lock);
+	mutex_unlock(&data->mutex);
 
 	return status ? : size;
 }
-
-static DEVICE_ATTR(active_low, 0644,
-		gpio_active_low_show, gpio_active_low_store);
+static DEVICE_ATTR_RW(active_low);
 
 static umode_t gpio_is_visible(struct kobject *kobj, struct attribute *attr,
 			       int n)
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
-	struct gpio_desc *desc = dev_get_drvdata(dev);
+	struct gpiod_data *data = dev_get_drvdata(dev);
+	struct gpio_desc *desc = data->desc;
 	umode_t mode = attr->mode;
-	bool show_direction = test_bit(FLAG_SYSFS_DIR, &desc->flags);
+	bool show_direction = data->direction_can_change;
 
 	if (attr == &dev_attr_direction.attr) {
 		if (!show_direction)
@@ -402,32 +397,32 @@ static const struct attribute_group *gpio_groups[] = {
  *   /ngpio ... matching gpio_chip.ngpio
  */
 
-static ssize_t chip_base_show(struct device *dev,
+static ssize_t base_show(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
 	const struct gpio_chip	*chip = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%d\n", chip->base);
 }
-static DEVICE_ATTR(base, 0444, chip_base_show, NULL);
+static DEVICE_ATTR_RO(base);
 
-static ssize_t chip_label_show(struct device *dev,
+static ssize_t label_show(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
 	const struct gpio_chip	*chip = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%s\n", chip->label ? : "");
 }
-static DEVICE_ATTR(label, 0444, chip_label_show, NULL);
+static DEVICE_ATTR_RO(label);
 
-static ssize_t chip_ngpio_show(struct device *dev,
+static ssize_t ngpio_show(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
 	const struct gpio_chip	*chip = dev_get_drvdata(dev);
 
 	return sprintf(buf, "%u\n", chip->ngpio);
 }
-static DEVICE_ATTR(ngpio, 0444, chip_ngpio_show, NULL);
+static DEVICE_ATTR_RO(ngpio);
 
 static struct attribute *gpiochip_attrs[] = {
 	&dev_attr_base.attr,
@@ -552,6 +547,7 @@ static struct class gpio_class = {
 int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
 {
 	struct gpio_chip	*chip;
+	struct gpiod_data	*data;
 	unsigned long		flags;
 	int			status;
 	const char		*ioname = NULL;
@@ -574,9 +570,9 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
 	mutex_lock(&sysfs_lock);
 
 	/* check if chip is being removed */
-	if (!chip || !chip->exported) {
+	if (!chip || !chip->cdev) {
 		status = -ENODEV;
-		goto fail_unlock;
+		goto err_unlock;
 	}
 
 	spin_lock_irqsave(&gpio_lock, flags);
@@ -588,43 +584,54 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
 				test_bit(FLAG_REQUESTED, &desc->flags),
 				test_bit(FLAG_EXPORT, &desc->flags));
 		status = -EPERM;
-		goto fail_unlock;
+		goto err_unlock;
 	}
+	spin_unlock_irqrestore(&gpio_lock, flags);
 
-	if (desc->chip->direction_input && desc->chip->direction_output &&
-			direction_may_change) {
-		set_bit(FLAG_SYSFS_DIR, &desc->flags);
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		status = -ENOMEM;
+		goto err_unlock;
 	}
 
-	spin_unlock_irqrestore(&gpio_lock, flags);
+	data->desc = desc;
+	mutex_init(&data->mutex);
+	if (chip->direction_input && chip->direction_output)
+		data->direction_can_change = direction_may_change;
+	else
+		data->direction_can_change = false;
 
 	offset = gpio_chip_hwgpio(desc);
-	if (desc->chip->names && desc->chip->names[offset])
-		ioname = desc->chip->names[offset];
+	if (chip->names && chip->names[offset])
+		ioname = chip->names[offset];
 
-	dev = device_create_with_groups(&gpio_class, desc->chip->dev,
-					MKDEV(0, 0), desc, gpio_groups,
+	dev = device_create_with_groups(&gpio_class, chip->dev,
+					MKDEV(0, 0), data, gpio_groups,
 					ioname ? ioname : "gpio%u",
 					desc_to_gpio(desc));
 	if (IS_ERR(dev)) {
 		status = PTR_ERR(dev);
-		goto fail_unlock;
+		goto err_free_data;
 	}
 
 	set_bit(FLAG_EXPORT, &desc->flags);
 	mutex_unlock(&sysfs_lock);
 	return 0;
 
-fail_unlock:
+err_free_data:
+	kfree(data);
+err_unlock:
 	mutex_unlock(&sysfs_lock);
 	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
 	return status;
 }
 EXPORT_SYMBOL_GPL(gpiod_export);
 
-static int match_export(struct device *dev, const void *data)
+static int match_export(struct device *dev, const void *desc)
 {
-	return dev_get_drvdata(dev) == data;
+	struct gpiod_data *data = dev_get_drvdata(dev);
+
+	return data->desc == desc;
 }
 
 /**
@@ -641,82 +648,26 @@ static int match_export(struct device *dev, const void *data)
 int gpiod_export_link(struct device *dev, const char *name,
 		      struct gpio_desc *desc)
 {
-	int			status = -EINVAL;
+	struct device *cdev;
+	int ret;
 
 	if (!desc) {
 		pr_warn("%s: invalid GPIO\n", __func__);
 		return -EINVAL;
 	}
 
-	mutex_lock(&sysfs_lock);
-
-	if (test_bit(FLAG_EXPORT, &desc->flags)) {
-		struct device *tdev;
-
-		tdev = class_find_device(&gpio_class, NULL, desc, match_export);
-		if (tdev != NULL) {
-			status = sysfs_create_link(&dev->kobj, &tdev->kobj,
-						name);
-			put_device(tdev);
-		} else {
-			status = -ENODEV;
-		}
-	}
-
-	mutex_unlock(&sysfs_lock);
+	cdev = class_find_device(&gpio_class, NULL, desc, match_export);
+	if (!cdev)
+		return -ENODEV;
 
-	if (status)
-		gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+	ret = sysfs_create_link(&dev->kobj, &cdev->kobj, name);
+	put_device(cdev);
 
-	return status;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(gpiod_export_link);
 
 /**
- * gpiod_sysfs_set_active_low - set the polarity of gpio sysfs value
- * @gpio: gpio to change
- * @value: non-zero to use active low, i.e. inverted values
- *
- * Set the polarity of /sys/class/gpio/gpioN/value sysfs attribute.
- * The GPIO does not have to be exported yet.  If poll(2) support has
- * been enabled for either rising or falling edge, it will be
- * reconfigured to follow the new polarity.
- *
- * Returns zero on success, else an error.
- */
-int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value)
-{
-	struct device		*dev = NULL;
-	int			status = -EINVAL;
-
-	if (!desc) {
-		pr_warn("%s: invalid GPIO\n", __func__);
-		return -EINVAL;
-	}
-
-	mutex_lock(&sysfs_lock);
-
-	if (test_bit(FLAG_EXPORT, &desc->flags)) {
-		dev = class_find_device(&gpio_class, NULL, desc, match_export);
-		if (dev == NULL) {
-			status = -ENODEV;
-			goto unlock;
-		}
-	}
-
-	status = sysfs_set_active_low(desc, dev, value);
-	put_device(dev);
-unlock:
-	mutex_unlock(&sysfs_lock);
-
-	if (status)
-		gpiod_dbg(desc, "%s: status %d\n", __func__, status);
-
-	return status;
-}
-EXPORT_SYMBOL_GPL(gpiod_sysfs_set_active_low);
-
-/**
  * gpiod_unexport - reverse effect of gpio_export()
  * @gpio: gpio to make unavailable
  *
@@ -724,8 +675,8 @@ EXPORT_SYMBOL_GPL(gpiod_sysfs_set_active_low);
  */
 void gpiod_unexport(struct gpio_desc *desc)
 {
-	int			status = 0;
-	struct device		*dev = NULL;
+	struct gpiod_data *data;
+	struct device *dev;
 
 	if (!desc) {
 		pr_warn("%s: invalid GPIO\n", __func__);
@@ -734,82 +685,79 @@ void gpiod_unexport(struct gpio_desc *desc)
 
 	mutex_lock(&sysfs_lock);
 
-	if (test_bit(FLAG_EXPORT, &desc->flags)) {
+	if (!test_bit(FLAG_EXPORT, &desc->flags))
+		goto err_unlock;
 
-		dev = class_find_device(&gpio_class, NULL, desc, match_export);
-		if (dev) {
-			gpio_setup_irq(desc, dev, 0);
-			clear_bit(FLAG_SYSFS_DIR, &desc->flags);
-			clear_bit(FLAG_EXPORT, &desc->flags);
-		} else
-			status = -ENODEV;
-	}
+	dev = class_find_device(&gpio_class, NULL, desc, match_export);
+	if (!dev)
+		goto err_unlock;
+
+	data = dev_get_drvdata(dev);
+
+	clear_bit(FLAG_EXPORT, &desc->flags);
+
+	device_unregister(dev);
+
+	/*
+	 * Release irq after deregistration to prevent race with edge_store.
+	 */
+	if (data->irq_flags)
+		gpio_sysfs_free_irq(dev);
 
 	mutex_unlock(&sysfs_lock);
 
-	if (dev) {
-		device_unregister(dev);
-		put_device(dev);
-	}
+	put_device(dev);
+	kfree(data);
 
-	if (status)
-		gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+	return;
+
+err_unlock:
+	mutex_unlock(&sysfs_lock);
 }
 EXPORT_SYMBOL_GPL(gpiod_unexport);
 
-int gpiochip_export(struct gpio_chip *chip)
+int gpiochip_sysfs_register(struct gpio_chip *chip)
 {
-	int		status;
 	struct device	*dev;
 
-	/* Many systems register gpio chips for SOC support very early,
+	/*
+	 * Many systems add gpio chips for SOC support very early,
 	 * before driver model support is available.  In those cases we
-	 * export this later, in gpiolib_sysfs_init() ... here we just
+	 * register later, in gpiolib_sysfs_init() ... here we just
 	 * verify that _some_ field of gpio_class got initialized.
 	 */
 	if (!gpio_class.p)
 		return 0;
 
 	/* use chip->base for the ID; it's already known to be unique */
-	mutex_lock(&sysfs_lock);
 	dev = device_create_with_groups(&gpio_class, chip->dev, MKDEV(0, 0),
 					chip, gpiochip_groups,
 					"gpiochip%d", chip->base);
 	if (IS_ERR(dev))
-		status = PTR_ERR(dev);
-	else
-		status = 0;
-	chip->exported = (status == 0);
-	mutex_unlock(&sysfs_lock);
+		return PTR_ERR(dev);
 
-	if (status)
-		chip_dbg(chip, "%s: status %d\n", __func__, status);
+	mutex_lock(&sysfs_lock);
+	chip->cdev = dev;
+	mutex_unlock(&sysfs_lock);
 
-	return status;
+	return 0;
 }
 
-void gpiochip_unexport(struct gpio_chip *chip)
+void gpiochip_sysfs_unregister(struct gpio_chip *chip)
 {
-	int			status;
-	struct device		*dev;
 	struct gpio_desc *desc;
 	unsigned int i;
 
+	if (!chip->cdev)
+		return;
+
+	device_unregister(chip->cdev);
+
+	/* prevent further gpiod exports */
 	mutex_lock(&sysfs_lock);
-	dev = class_find_device(&gpio_class, NULL, chip, match_export);
-	if (dev) {
-		put_device(dev);
-		device_unregister(dev);
-		/* prevent further gpiod exports */
-		chip->exported = false;
-		status = 0;
-	} else
-		status = -ENODEV;
+	chip->cdev = NULL;
 	mutex_unlock(&sysfs_lock);
 
-	if (status)
-		chip_dbg(chip, "%s: status %d\n", __func__, status);
-
 	/* unregister gpiod class devices owned by sysfs */
 	for (i = 0; i < chip->ngpio; i++) {
 		desc = &chip->desc[i];
@@ -836,19 +784,20 @@ static int __init gpiolib_sysfs_init(void)
 	 */
 	spin_lock_irqsave(&gpio_lock, flags);
 	list_for_each_entry(chip, &gpio_chips, list) {
-		if (chip->exported)
+		if (chip->cdev)
 			continue;
 
 		/*
-		 * TODO we yield gpio_lock here because gpiochip_export()
-		 * acquires a mutex. This is unsafe and needs to be fixed.
+		 * TODO we yield gpio_lock here because
+		 * gpiochip_sysfs_register() acquires a mutex. This is unsafe
+		 * and needs to be fixed.
 		 *
 		 * Also it would be nice to use gpiochip_find() here so we
 		 * can keep gpio_chips local to gpiolib.c, but the yield of
 		 * gpio_lock prevents us from doing this.
 		 */
 		spin_unlock_irqrestore(&gpio_lock, flags);
-		status = gpiochip_export(chip);
+		status = gpiochip_sysfs_register(chip);
 		spin_lock_irqsave(&gpio_lock, flags);
 	}
 	spin_unlock_irqrestore(&gpio_lock, flags);
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 6bc612b8a49fcf..1008107895fce3 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -290,7 +290,7 @@ int gpiochip_add(struct gpio_chip *chip)
 	of_gpiochip_add(chip);
 	acpi_gpiochip_add(chip);
 
-	status = gpiochip_export(chip);
+	status = gpiochip_sysfs_register(chip);
 	if (status)
 		goto err_remove_chip;
 
@@ -327,10 +327,12 @@ EXPORT_SYMBOL_GPL(gpiochip_add);
  */
 void gpiochip_remove(struct gpio_chip *chip)
 {
+	struct gpio_desc *desc;
 	unsigned long	flags;
 	unsigned	id;
+	bool		requested = false;
 
-	gpiochip_unexport(chip);
+	gpiochip_sysfs_unregister(chip);
 
 	gpiochip_irqchip_remove(chip);
 
@@ -341,15 +343,17 @@ void gpiochip_remove(struct gpio_chip *chip)
 
 	spin_lock_irqsave(&gpio_lock, flags);
 	for (id = 0; id < chip->ngpio; id++) {
-		if (test_bit(FLAG_REQUESTED, &chip->desc[id].flags))
-			dev_crit(chip->dev, "REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED\n");
+		desc = &chip->desc[id];
+		desc->chip = NULL;
+		if (test_bit(FLAG_REQUESTED, &desc->flags))
+			requested = true;
 	}
-	for (id = 0; id < chip->ngpio; id++)
-		chip->desc[id].chip = NULL;
-
 	list_del(&chip->list);
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
+	if (requested)
+		dev_crit(chip->dev, "REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED\n");
+
 	kfree(chip->desc);
 	chip->desc = NULL;
 }
@@ -441,6 +445,8 @@ void gpiochip_set_chained_irqchip(struct gpio_chip *gpiochip,
 		 */
 		irq_set_handler_data(parent_irq, gpiochip);
 		irq_set_chained_handler(parent_irq, parent_handler);
+
+		gpiochip->irq_parent = parent_irq;
 	}
 
 	/* Set the parent IRQ for all affected IRQs */
@@ -549,6 +555,11 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
 
 	acpi_gpiochip_free_interrupts(gpiochip);
 
+	if (gpiochip->irq_parent) {
+		irq_set_chained_handler(gpiochip->irq_parent, NULL);
+		irq_set_handler_data(gpiochip->irq_parent, NULL);
+	}
+
 	/* Remove all IRQ mappings and delete the domain */
 	if (gpiochip->irqdomain) {
 		for (offset = 0; offset < gpiochip->ngpio; offset++)
@@ -608,7 +619,7 @@ int gpiochip_irqchip_add(struct gpio_chip *gpiochip,
 	of_node = gpiochip->dev->of_node;
 #ifdef CONFIG_OF_GPIO
 	/*
-	 * If the gpiochip has an assigned OF node this takes precendence
+	 * If the gpiochip has an assigned OF node this takes precedence
 	 * FIXME: get rid of this and use gpiochip->dev->of_node everywhere
 	 */
 	if (gpiochip->of_node)
@@ -1211,7 +1222,7 @@ EXPORT_SYMBOL_GPL(gpiod_get_value);
 /*
  *  _gpio_set_open_drain_value() - Set the open drain gpio's value.
  * @desc: gpio descriptor whose state need to be set.
- * @value: Non-zero for setting it HIGH otherise it will set to LOW.
+ * @value: Non-zero for setting it HIGH otherwise it will set to LOW.
  */
 static void _gpio_set_open_drain_value(struct gpio_desc *desc, bool value)
 {
@@ -1238,7 +1249,7 @@ static void _gpio_set_open_drain_value(struct gpio_desc *desc, bool value)
 /*
  *  _gpio_set_open_source_value() - Set the open source gpio's value.
  * @desc: gpio descriptor whose state need to be set.
- * @value: Non-zero for setting it HIGH otherise it will set to LOW.
+ * @value: Non-zero for setting it HIGH otherwise it will set to LOW.
  */
 static void _gpio_set_open_source_value(struct gpio_desc *desc, bool value)
 {
@@ -1307,10 +1318,10 @@ static void gpio_chip_set_multiple(struct gpio_chip *chip,
 	}
 }
 
-static void gpiod_set_array_priv(bool raw, bool can_sleep,
-				 unsigned int array_size,
-				 struct gpio_desc **desc_array,
-				 int *value_array)
+static void gpiod_set_array_value_priv(bool raw, bool can_sleep,
+				       unsigned int array_size,
+				       struct gpio_desc **desc_array,
+				       int *value_array)
 {
 	int i = 0;
 
@@ -1403,7 +1414,7 @@ void gpiod_set_value(struct gpio_desc *desc, int value)
 EXPORT_SYMBOL_GPL(gpiod_set_value);
 
 /**
- * gpiod_set_raw_array() - assign values to an array of GPIOs
+ * gpiod_set_raw_array_value() - assign values to an array of GPIOs
  * @array_size: number of elements in the descriptor / value arrays
  * @desc_array: array of GPIO descriptors whose values will be assigned
  * @value_array: array of values to assign
@@ -1414,17 +1425,18 @@ EXPORT_SYMBOL_GPL(gpiod_set_value);
  * This function should be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
  */
-void gpiod_set_raw_array(unsigned int array_size,
+void gpiod_set_raw_array_value(unsigned int array_size,
 			 struct gpio_desc **desc_array, int *value_array)
 {
 	if (!desc_array)
 		return;
-	gpiod_set_array_priv(true, false, array_size, desc_array, value_array);
+	gpiod_set_array_value_priv(true, false, array_size, desc_array,
+				   value_array);
 }
-EXPORT_SYMBOL_GPL(gpiod_set_raw_array);
+EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value);
 
 /**
- * gpiod_set_array() - assign values to an array of GPIOs
+ * gpiod_set_array_value() - assign values to an array of GPIOs
  * @array_size: number of elements in the descriptor / value arrays
  * @desc_array: array of GPIO descriptors whose values will be assigned
  * @value_array: array of values to assign
@@ -1435,14 +1447,15 @@ EXPORT_SYMBOL_GPL(gpiod_set_raw_array);
  * This function should be called from contexts where we cannot sleep, and will
  * complain if the GPIO chip functions potentially sleep.
  */
-void gpiod_set_array(unsigned int array_size,
-		     struct gpio_desc **desc_array, int *value_array)
+void gpiod_set_array_value(unsigned int array_size,
+			   struct gpio_desc **desc_array, int *value_array)
 {
 	if (!desc_array)
 		return;
-	gpiod_set_array_priv(false, false, array_size, desc_array, value_array);
+	gpiod_set_array_value_priv(false, false, array_size, desc_array,
+				   value_array);
 }
-EXPORT_SYMBOL_GPL(gpiod_set_array);
+EXPORT_SYMBOL_GPL(gpiod_set_array_value);
 
 /**
  * gpiod_cansleep() - report whether gpio value access may sleep
@@ -1604,7 +1617,7 @@ void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
 EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep);
 
 /**
- * gpiod_set_raw_array_cansleep() - assign values to an array of GPIOs
+ * gpiod_set_raw_array_value_cansleep() - assign values to an array of GPIOs
  * @array_size: number of elements in the descriptor / value arrays
  * @desc_array: array of GPIO descriptors whose values will be assigned
  * @value_array: array of values to assign
@@ -1614,19 +1627,20 @@ EXPORT_SYMBOL_GPL(gpiod_set_value_cansleep);
  *
  * This function is to be called from contexts that can sleep.
  */
-void gpiod_set_raw_array_cansleep(unsigned int array_size,
-				  struct gpio_desc **desc_array,
-				  int *value_array)
+void gpiod_set_raw_array_value_cansleep(unsigned int array_size,
+					struct gpio_desc **desc_array,
+					int *value_array)
 {
 	might_sleep_if(extra_checks);
 	if (!desc_array)
 		return;
-	gpiod_set_array_priv(true, true, array_size, desc_array, value_array);
+	gpiod_set_array_value_priv(true, true, array_size, desc_array,
+				   value_array);
 }
-EXPORT_SYMBOL_GPL(gpiod_set_raw_array_cansleep);
+EXPORT_SYMBOL_GPL(gpiod_set_raw_array_value_cansleep);
 
 /**
- * gpiod_set_array_cansleep() - assign values to an array of GPIOs
+ * gpiod_set_array_value_cansleep() - assign values to an array of GPIOs
  * @array_size: number of elements in the descriptor / value arrays
  * @desc_array: array of GPIO descriptors whose values will be assigned
  * @value_array: array of values to assign
@@ -1636,16 +1650,17 @@ EXPORT_SYMBOL_GPL(gpiod_set_raw_array_cansleep);
  *
  * This function is to be called from contexts that can sleep.
  */
-void gpiod_set_array_cansleep(unsigned int array_size,
-			      struct gpio_desc **desc_array,
-			      int *value_array)
+void gpiod_set_array_value_cansleep(unsigned int array_size,
+				    struct gpio_desc **desc_array,
+				    int *value_array)
 {
 	might_sleep_if(extra_checks);
 	if (!desc_array)
 		return;
-	gpiod_set_array_priv(false, true, array_size, desc_array, value_array);
+	gpiod_set_array_value_priv(false, true, array_size, desc_array,
+				   value_array);
 }
-EXPORT_SYMBOL_GPL(gpiod_set_array_cansleep);
+EXPORT_SYMBOL_GPL(gpiod_set_array_value_cansleep);
 
 /**
  * gpiod_add_lookup_table() - register GPIO device consumers
@@ -1880,7 +1895,7 @@ EXPORT_SYMBOL_GPL(gpiod_count);
  *
  * Return the GPIO descriptor corresponding to the function con_id of device
  * dev, -ENOENT if no GPIO has been assigned to the requested function, or
- * another IS_ERR() code if an error occured while trying to acquire the GPIO.
+ * another IS_ERR() code if an error occurred while trying to acquire the GPIO.
  */
 struct gpio_desc *__must_check __gpiod_get(struct device *dev, const char *con_id,
 					 enum gpiod_flags flags)
@@ -1960,7 +1975,7 @@ static int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
  *
  * Return a valid GPIO descriptor, -ENOENT if no GPIO has been assigned to the
  * requested function and/or index, or another IS_ERR() code if an error
- * occured while trying to acquire the GPIO.
+ * occurred while trying to acquire the GPIO.
  */
 struct gpio_desc *__must_check __gpiod_get_index(struct device *dev,
 					       const char *con_id,
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index 594b1798c0e7c6..bf343004b0085c 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -83,20 +83,12 @@ struct gpio_desc {
 #define FLAG_IS_OUT	1
 #define FLAG_EXPORT	2	/* protected by sysfs_lock */
 #define FLAG_SYSFS	3	/* exported via /sys/class/gpio/control */
-#define FLAG_TRIG_FALL	4	/* trigger on falling edge */
-#define FLAG_TRIG_RISE	5	/* trigger on rising edge */
 #define FLAG_ACTIVE_LOW	6	/* value has active low */
 #define FLAG_OPEN_DRAIN	7	/* Gpio is open drain type */
 #define FLAG_OPEN_SOURCE 8	/* Gpio is open source type */
 #define FLAG_USED_AS_IRQ 9	/* GPIO is connected to an IRQ */
-#define FLAG_SYSFS_DIR	10	/* show sysfs direction attribute */
 #define FLAG_IS_HOGGED	11	/* GPIO is hogged */
 
-#define ID_SHIFT	16	/* add new flags before this one */
-
-#define GPIO_FLAGS_MASK		((1 << ID_SHIFT) - 1)
-#define GPIO_TRIGGER_MASK	(BIT(FLAG_TRIG_FALL) | BIT(FLAG_TRIG_RISE))
-
 	const char		*label;
 };
 
@@ -151,17 +143,17 @@ static int __maybe_unused gpio_chip_hwgpio(const struct gpio_desc *desc)
 
 #ifdef CONFIG_GPIO_SYSFS
 
-int gpiochip_export(struct gpio_chip *chip);
-void gpiochip_unexport(struct gpio_chip *chip);
+int gpiochip_sysfs_register(struct gpio_chip *chip);
+void gpiochip_sysfs_unregister(struct gpio_chip *chip);
 
 #else
 
-static inline int gpiochip_export(struct gpio_chip *chip)
+static inline int gpiochip_sysfs_register(struct gpio_chip *chip)
 {
 	return 0;
 }
 
-static inline void gpiochip_unexport(struct gpio_chip *chip)
+static inline void gpiochip_sysfs_unregister(struct gpio_chip *chip)
 {
 }
 
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 96771eaa923e5d..069a41f116ddcd 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -107,7 +107,7 @@ static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
 			if (sb->access_mode == ACPI_I2C_10BIT_MODE)
 				info->flags |= I2C_CLIENT_TEN;
 		}
-	} else if (info->irq < 0) {
+	} else if (!info->irq) {
 		struct resource r;
 
 		if (acpi_dev_resource_interrupt(ares, 0, &r))
@@ -134,7 +134,6 @@ static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
 
 	memset(&info, 0, sizeof(info));
 	info.fwnode = acpi_fwnode_handle(adev);
-	info.irq = -1;
 
 	INIT_LIST_HEAD(&resource_list);
 	ret = acpi_dev_get_resources(adev, &resource_list,
@@ -637,8 +636,13 @@ static int i2c_device_probe(struct device *dev)
 	if (!client)
 		return 0;
 
-	if (!client->irq && dev->of_node) {
-		int irq = of_irq_get(dev->of_node, 0);
+	if (!client->irq) {
+		int irq = -ENOENT;
+
+		if (dev->of_node)
+			irq = of_irq_get(dev->of_node, 0);
+		else if (ACPI_COMPANION(dev))
+			irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0);
 
 		if (irq == -EPROBE_DEFER)
 			return irq;
diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c
index 66edd99bc302dd..7ddb1ab70891ce 100644
--- a/drivers/net/phy/mdio-mux-gpio.c
+++ b/drivers/net/phy/mdio-mux-gpio.c
@@ -35,7 +35,8 @@ static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
 	for (n = 0; n < s->gpios->ndescs; n++)
 		values[n] = (desired_child >> n) & 1;
 
-	gpiod_set_array_cansleep(s->gpios->ndescs, s->gpios->desc, values);
+	gpiod_set_array_value_cansleep(s->gpios->ndescs, s->gpios->desc,
+				       values);
 
 	return 0;
 }
diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c
index ef8ea1f184c7d5..402f7fb541333a 100644
--- a/drivers/tty/serial/serial_mctrl_gpio.c
+++ b/drivers/tty/serial/serial_mctrl_gpio.c
@@ -54,7 +54,7 @@ void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
 			value_array[count] = !!(mctrl & mctrl_gpios_desc[i].mctrl);
 			count++;
 		}
-	gpiod_set_array(count, desc_array, value_array);
+	gpiod_set_array_value(count, desc_array, value_array);
 }
 EXPORT_SYMBOL_GPL(mctrl_gpio_set);
 
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 9bb0d11729c9ce..40ec1433f05de2 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -128,11 +128,6 @@ static inline int gpio_export_link(struct device *dev, const char *name,
 	return gpiod_export_link(dev, name, gpio_to_desc(gpio));
 }
 
-static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
-{
-	return gpiod_sysfs_set_active_low(gpio_to_desc(gpio), value);
-}
-
 static inline void gpio_unexport(unsigned gpio)
 {
 	gpiod_unexport(gpio_to_desc(gpio));
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 90e4ed1eb191ad..a4acb5542f5273 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -731,6 +731,8 @@ static inline void acpi_dev_remove_driver_gpios(struct acpi_device *adev)
 	if (adev)
 		adev->driver_gpios = NULL;
 }
+
+int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index);
 #else
 static inline int acpi_dev_add_driver_gpios(struct acpi_device *adev,
 			      const struct acpi_gpio_mapping *gpios)
@@ -738,6 +740,11 @@ static inline int acpi_dev_add_driver_gpios(struct acpi_device *adev,
 	return -ENXIO;
 }
 static inline void acpi_dev_remove_driver_gpios(struct acpi_device *adev) {}
+
+static inline int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
+{
+	return -ENXIO;
+}
 #endif
 
 /* Device properties */
diff --git a/include/linux/basic_mmio_gpio.h b/include/linux/basic_mmio_gpio.h
index 0e97856b2cffaf..14eea946e6401c 100644
--- a/include/linux/basic_mmio_gpio.h
+++ b/include/linux/basic_mmio_gpio.h
@@ -74,5 +74,6 @@ int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
 #define BGPIOF_UNREADABLE_REG_SET	BIT(1) /* reg_set is unreadable */
 #define BGPIOF_UNREADABLE_REG_DIR	BIT(2) /* reg_dir is unreadable */
 #define BGPIOF_BIG_ENDIAN_BYTE_ORDER	BIT(3)
+#define BGPIOF_READ_OUTPUT_REG_SET     BIT(4) /* reg_set stores output value */
 
 #endif /* __BASIC_MMIO_GPIO_H */
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index ab81339a8590a8..d12b5d566e4b11 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -196,13 +196,6 @@ static inline int gpio_export_link(struct device *dev, const char *name,
 	return -EINVAL;
 }
 
-static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
-{
-	/* GPIO can never have been requested */
-	WARN_ON(1);
-	return -EINVAL;
-}
-
 static inline void gpio_unexport(unsigned gpio)
 {
 	/* GPIO can never have been exported */
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index da042657dc31d7..adac255aee86e3 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -100,24 +100,25 @@ int gpiod_direction_output_raw(struct gpio_desc *desc, int value);
 /* Value get/set from non-sleeping context */
 int gpiod_get_value(const struct gpio_desc *desc);
 void gpiod_set_value(struct gpio_desc *desc, int value);
-void gpiod_set_array(unsigned int array_size,
-		     struct gpio_desc **desc_array, int *value_array);
+void gpiod_set_array_value(unsigned int array_size,
+			   struct gpio_desc **desc_array, int *value_array);
 int gpiod_get_raw_value(const struct gpio_desc *desc);
 void gpiod_set_raw_value(struct gpio_desc *desc, int value);
-void gpiod_set_raw_array(unsigned int array_size,
-			 struct gpio_desc **desc_array, int *value_array);
+void gpiod_set_raw_array_value(unsigned int array_size,
+			       struct gpio_desc **desc_array,
+			       int *value_array);
 
 /* Value get/set from sleeping context */
 int gpiod_get_value_cansleep(const struct gpio_desc *desc);
 void gpiod_set_value_cansleep(struct gpio_desc *desc, int value);
-void gpiod_set_array_cansleep(unsigned int array_size,
-			      struct gpio_desc **desc_array,
-			      int *value_array);
+void gpiod_set_array_value_cansleep(unsigned int array_size,
+				    struct gpio_desc **desc_array,
+				    int *value_array);
 int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc);
 void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value);
-void gpiod_set_raw_array_cansleep(unsigned int array_size,
-				  struct gpio_desc **desc_array,
-				  int *value_array);
+void gpiod_set_raw_array_value_cansleep(unsigned int array_size,
+					struct gpio_desc **desc_array,
+					int *value_array);
 
 int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce);
 
@@ -304,9 +305,9 @@ static inline void gpiod_set_value(struct gpio_desc *desc, int value)
 	/* GPIO can never have been requested */
 	WARN_ON(1);
 }
-static inline void gpiod_set_array(unsigned int array_size,
-				   struct gpio_desc **desc_array,
-				   int *value_array)
+static inline void gpiod_set_array_value(unsigned int array_size,
+					 struct gpio_desc **desc_array,
+					 int *value_array)
 {
 	/* GPIO can never have been requested */
 	WARN_ON(1);
@@ -322,9 +323,9 @@ static inline void gpiod_set_raw_value(struct gpio_desc *desc, int value)
 	/* GPIO can never have been requested */
 	WARN_ON(1);
 }
-static inline void gpiod_set_raw_array(unsigned int array_size,
-				       struct gpio_desc **desc_array,
-				       int *value_array)
+static inline void gpiod_set_raw_array_value(unsigned int array_size,
+					     struct gpio_desc **desc_array,
+					     int *value_array)
 {
 	/* GPIO can never have been requested */
 	WARN_ON(1);
@@ -341,7 +342,7 @@ static inline void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
 	/* GPIO can never have been requested */
 	WARN_ON(1);
 }
-static inline void gpiod_set_array_cansleep(unsigned int array_size,
+static inline void gpiod_set_array_value_cansleep(unsigned int array_size,
 					    struct gpio_desc **desc_array,
 					    int *value_array)
 {
@@ -360,7 +361,7 @@ static inline void gpiod_set_raw_value_cansleep(struct gpio_desc *desc,
 	/* GPIO can never have been requested */
 	WARN_ON(1);
 }
-static inline void gpiod_set_raw_array_cansleep(unsigned int array_size,
+static inline void gpiod_set_raw_array_value_cansleep(unsigned int array_size,
 						struct gpio_desc **desc_array,
 						int *value_array)
 {
@@ -464,7 +465,6 @@ static inline struct gpio_desc *devm_get_gpiod_from_child(
 int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
 int gpiod_export_link(struct device *dev, const char *name,
 		      struct gpio_desc *desc);
-int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
 void gpiod_unexport(struct gpio_desc *desc);
 
 #else  /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
@@ -481,11 +481,6 @@ static inline int gpiod_export_link(struct device *dev, const char *name,
 	return -ENOSYS;
 }
 
-static inline int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value)
-{
-	return -ENOSYS;
-}
-
 static inline void gpiod_unexport(struct gpio_desc *desc)
 {
 }
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index f1b36593ec9f18..cc7ec129b329ef 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -20,6 +20,7 @@ struct seq_file;
  * struct gpio_chip - abstract a GPIO controller
  * @label: for diagnostics
  * @dev: optional device providing the GPIOs
+ * @cdev: class device used by sysfs interface (may be NULL)
  * @owner: helps prevent removal of modules exporting active GPIOs
  * @list: links gpio_chips together for traversal
  * @request: optional hook for chip-specific activation, such as
@@ -41,8 +42,12 @@ struct seq_file;
  * @dbg_show: optional routine to show contents in debugfs; default code
  *	will be used when this is omitted, but custom code can show extra
  *	state (such as pullup/pulldown configuration).
- * @base: identifies the first GPIO number handled by this chip; or, if
- *	negative during registration, requests dynamic ID allocation.
+ * @base: identifies the first GPIO number handled by this chip;
+ *	or, if negative during registration, requests dynamic ID allocation.
+ *	DEPRECATION: providing anything non-negative and nailing the base
+ *	base offset of GPIO chips is deprecated. Please pass -1 as base to
+ *	let gpiolib select the chip base in all possible cases. We want to
+ *	get rid of the static GPIO number space in the long run.
  * @ngpio: the number of GPIOs handled by this controller; the last GPIO
  *	handled is (base + ngpio - 1).
  * @desc: array of ngpio descriptors. Private.
@@ -57,7 +62,6 @@ struct seq_file;
  *	implies that if the chip supports IRQs, these IRQs need to be threaded
  *	as the chip access may sleep when e.g. reading out the IRQ status
  *	registers.
- * @exported: flags if the gpiochip is exported for use from sysfs. Private.
  * @irq_not_threaded: flag must be set if @can_sleep is set but the
  *	IRQs don't need to be threaded
  *
@@ -74,6 +78,7 @@ struct seq_file;
 struct gpio_chip {
 	const char		*label;
 	struct device		*dev;
+	struct device		*cdev;
 	struct module		*owner;
 	struct list_head        list;
 
@@ -109,7 +114,6 @@ struct gpio_chip {
 	const char		*const *names;
 	bool			can_sleep;
 	bool			irq_not_threaded;
-	bool			exported;
 
 #ifdef CONFIG_GPIOLIB_IRQCHIP
 	/*
@@ -121,6 +125,7 @@ struct gpio_chip {
 	unsigned int		irq_base;
 	irq_flow_handler_t	irq_handler;
 	unsigned int		irq_default_type;
+	int			irq_parent;
 #endif
 
 #if defined(CONFIG_OF_GPIO)
diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h
index 5d50b25a73d713..cb2618147c34f6 100644
--- a/include/linux/platform_data/gpio-omap.h
+++ b/include/linux/platform_data/gpio-omap.h
@@ -208,9 +208,17 @@ struct omap_gpio_platform_data {
 	int (*get_context_loss_count)(struct device *dev);
 };
 
+#if IS_BUILTIN(CONFIG_GPIO_OMAP)
 extern void omap2_gpio_prepare_for_idle(int off_mode);
 extern void omap2_gpio_resume_after_idle(void);
-extern void omap_set_gpio_debounce(int gpio, int enable);
-extern void omap_set_gpio_debounce_time(int gpio, int enable);
+#else
+static inline void omap2_gpio_prepare_for_idle(int off_mode)
+{
+}
+
+static inline void omap2_gpio_resume_after_idle(void)
+{
+}
+#endif
 
 #endif