Age | Commit message (Expand) | Author | Files | Lines |
2020-08-14 | olpc/sound: split off the OLPC specific partslr/ariel | Lubomir Rintel | 4 | -1021/+1110 |
2020-08-14 | olpc/sound: move the Mic and HP jacks from /gpio-keys to /audio-complex | Lubomir Rintel | 1 | -0/+10 |
2020-08-14 | olpc/sound: make /audio-complex compatible with audio-graph-card | Lubomir Rintel | 1 | -2/+37 |
2020-08-14 | olpc/sound: make /audio compatible with marvell,mmp-sspa | Lubomir Rintel | 2 | -9/+26 |
2020-08-14 | arm/mmp2: add /audio-clocks | Lubomir Rintel | 3 | -1/+61 |
2020-08-14 | olpc/sound: split the /audio register range into two | Lubomir Rintel | 2 | -2/+16 |
2020-08-14 | arm/mmp2: move +audio from olpc/sound | Lubomir Rintel | 2 | -4/+4 |
2020-08-14 | olpc/sound: make /asram compatible with mmio-sram | Lubomir Rintel | 1 | -0/+8 |
2020-08-14 | olpc/sound: add "dmas" property to /audio | Lubomir Rintel | 1 | -0/+11 |
2020-08-14 | olpc/sound: add "iram" property to /adma | Lubomir Rintel | 1 | -0/+1 |
2020-08-14 | mmp2/irq: drop /interrupt-controller@128 on MMP2 | Lubomir Rintel | 1 | -1/+1 |
2020-08-14 | olpc/sound: on MMP2 the ADMA interrupts are not muxed | Lubomir Rintel | 1 | -0/+8 |
2020-08-14 | olpc/sound: move /asram before /adma | Lubomir Rintel | 1 | -7/+7 |
2020-08-14 | mmp2/clk: increase MPMU reg range | Lubomir Rintel | 1 | -1/+1 |
2020-08-14 | olpc/mmp2camera: add power domain on MMP3 | Lubomir Rintel | 1 | -0/+1 |
2020-08-14 | mmp3/galcore: split the /gpu node into 2D and 3D | Lubomir Rintel | 1 | -7/+34 |
2020-08-14 | mmp2/clk: rename mmp2-gpu-power-domain# to mmp2-gpu-pd# | Lubomir Rintel | 2 | -2/+2 |
2020-08-14 | Revert "q4e01ja" ("disable dtcompat.fth") | Lubomir Rintel | 2 | -1/+2 |
2020-08-14 | REMOVEME fedora-compat | Lubomir Rintel | 1 | -0/+5 |
2020-03-24 | mmp3/ariel: add Dell Ariel board support | Lubomir Rintel | 12 | -0/+1058 |
2020-03-24 | olpc: turn on olpc-compat? if alternate? is inspected on boot | Lubomir Rintel | 2 | -5/+12 |
2020-03-24 | olpc/4.0: optionally build DT for OLPC's 3.5 kernel | Lubomir Rintel | 4 | -0/+274 |
2020-03-24 | olpc/1.75/lcdcfg: keep the /panel node as it is | Lubomir Rintel | 1 | -24/+0 |
2020-03-24 | olpc/1.75/lcfcfg: deselect root node when we're done with things | Lubomir Rintel | 1 | -0/+1 |
2020-03-23 | olpc/rtc: move into dev/ds1338 | Lubomir Rintel | 2 | -123/+3 |
2020-03-23 | arm/olpc: fix gitignore | Lubomir Rintel | 3 | -6/+0 |
2020-03-23 | mmp2/uart: factor out the UART nodes | Lubomir Rintel | 5 | -59/+56 |
2020-03-23 | mmp2/uart: make the MMP UART compatible with intel,xscale-uart | Lubomir Rintel | 1 | -0/+3 |
2020-03-23 | mmp2/rtc: conditionalize the suspend/resume testing machinery | Lubomir Rintel | 1 | -0/+2 |
2020-03-23 | olpc/usb: make usb-hub-reset-gpios property optional | Lubomir Rintel | 1 | -0/+2 |
2020-03-23 | olpc: parametrize the gridmap and life demo resolution | Lubomir Rintel | 2 | -4/+5 |
2020-03-23 | olpc/lcd: fix a messed up horizontal front porch calculation | Lubomir Rintel | 1 | -3/+2 |
2020-03-23 | olpc/lcd: fix a handful of places that assume 16 bpp | Lubomir Rintel | 1 | -9/+18 |
2020-03-23 | olpc/lcd: fix compatible string on MMP3 | Lubomir Rintel | 1 | -0/+4 |
2020-03-23 | olpc/lcd: only include the HDMI driver if we have a HDMI port | Lubomir Rintel | 1 | -0/+2 |
2020-03-23 | olpc/lcd: only call into DCON on OLPC | Lubomir Rintel | 1 | -0/+2 |
2020-03-23 | arm/olpc: split OLPC LCD configuration from the LCDC driver | Lubomir Rintel | 3 | -27/+27 |
2020-03-23 | arm/olpc: move font selection from lcd.fth to build-fw.fth | Lubomir Rintel | 2 | -9/+9 |
2020-03-23 | mmp3/thermal: only show battery stats if there's a battery | Lubomir Rintel | 1 | -0/+2 |
2020-03-23 | mmp3/thermal: add /thermal-zones node | Lubomir Rintel | 1 | -0/+30 |
2020-03-23 | mmp3/thermal: add #thermal-sensor-cells | Lubomir Rintel | 1 | -0/+1 |
2020-03-23 | mmp3/thermal: also pass the complete register value to .tc | Lubomir Rintel | 1 | -5/+5 |
2020-03-23 | mmp2/twsi: move node creation from arm/olpc | Lubomir Rintel | 4 | -35/+50 |
2020-03-23 | olpc/twsi-i2c: fix TWSI5 address | Lubomir Rintel | 1 | -1/+1 |
2020-03-23 | mmp2/twsi-node: fix the register range | Lubomir Rintel | 1 | -2/+2 |
2020-03-23 | olpc/usb: also initialize HSIC | Lubomir Rintel | 1 | -0/+5 |
2020-03-23 | mmp3: add HSIC USB driver | Lubomir Rintel | 2 | -1/+105 |
2020-03-23 | mmp2: add nodes for all SSP SPI devices | Lubomir Rintel | 3 | -0/+46 |
2020-03-23 | olpc/sdhci: split out MMP2 SDHCI code | Lubomir Rintel | 5 | -149/+162 |
2020-03-23 | mmp3/gic: only fix up OLPC specific nodes on OLPC | Lubomir Rintel | 1 | -4/+6 |
2020-03-23 | mmp3/gic: create the TWD nodes | Lubomir Rintel | 1 | -0/+26 |
2020-03-23 | mmp3/gic: don't create separate interrupt mux nodes | Lubomir Rintel | 1 | -111/+57 |
2020-03-23 | mmp3/gic: delete the interrupt property before adding it anew | Lubomir Rintel | 1 | -0/+1 |
2020-03-23 | mmp3: tidy up interrupt controller references | Lubomir Rintel | 7 | -8/+7 |
2020-03-23 | mmp3: add /snoop-control-unit | Lubomir Rintel | 2 | -0/+35 |
2020-03-23 | mmp2: make /interrupt-controller compatible with marvell,mmp3-intc | Lubomir Rintel | 1 | -1/+4 |
2020-03-23 | mmp3/usb2phy: make /usb2-phy compatible with marvell,mmp3-usb-phy | Lubomir Rintel | 1 | -0/+3 |
2020-03-23 | mmp2: drop /apbc and /pmua | Lubomir Rintel | 3 | -392/+0 |
2020-03-23 | thunderstone: switch UART to clock from /clocks | Lubomir Rintel | 1 | -1/+1 |
2020-03-23 | thunderstone: switch /usb to clock from /clocks | Lubomir Rintel | 1 | -1/+1 |
2020-03-23 | thunderstone: switch vmeta to clock from /clocks | Lubomir Rintel | 1 | -1/+1 |
2020-03-23 | mmp3: switch galcore to clock from /clocks | Lubomir Rintel | 1 | -1/+1 |
2020-03-23 | olpc/cl4: switch SDHCI to clock from /clocks | Lubomir Rintel | 2 | -6/+5 |
2020-03-23 | mmp3: switch /thermal to clock from /clocks | Lubomir Rintel | 2 | -8/+12 |
2020-03-23 | mmp2/clk: add clock IDs for HSICs | Lubomir Rintel | 1 | -0/+2 |
2020-03-23 | mmp2/clk: don't enable SD master clock along with SDHCI1 | Lubomir Rintel | 1 | -11/+11 |
2020-03-23 | mmp2/clk: add a different compatible string on MMP3 | Lubomir Rintel | 1 | -0/+3 |
2020-03-23 | mmp2/clk: add SSP4 clock ID | Lubomir Rintel | 1 | -0/+1 |
2020-03-23 | mmp2/clk: add clock IDs for TWSI3 and TWSI5 | Lubomir Rintel | 1 | -0/+6 |
2020-03-23 | mmp2/galcore: fix the clock numbers | Lubomir Rintel | 2 | -5/+4 |
2020-03-23 | mmp2/galcore: drop assigned clocks | Lubomir Rintel | 1 | -8/+0 |
2020-03-23 | mmp3: fix the cpus/ node | Lubomir Rintel | 3 | -12/+74 |
2020-03-23 | mmp3: add l2 cache controller | Lubomir Rintel | 2 | -0/+42 |
2020-03-23 | olpc: split the mmp2 l2cache into a separate file | Lubomir Rintel | 2 | -5/+35 |
2020-03-23 | olpc/4.0: fix the mmp3 compatible string | Lubomir Rintel | 1 | -1/+1 |
2020-03-23 | mmp2/random: create a device node | Lubomir Rintel | 1 | -0/+6 |
2020-03-23 | cforth: update to a newer version | Lubomir Rintel | 6 | -21/+14 |
2020-03-23 | arm/linux: drop load-base off stack if not a zImage | Lubomir Rintel | 1 | -1/+1 |
2020-03-12 | build: turn off PIE by default | Lubomir Rintel | 1 | -1/+1 |
2020-03-12 | arm/olpc: use the same compiler to ofw clients and mcnand | Lubomir Rintel | 1 | -1/+1 |
2020-03-12 | builder.dic: rebuild | Lubomir Rintel | 3 | -0/+0 |
2020-03-12 | all: drop a handful of extra executable bits | Lubomir Rintel | 138 | -0/+0 |
2020-03-12 | pc/olpc: link /dcon with the /display and /panel | Lubomir Rintel | 1 | -0/+8 |
2020-03-12 | pc/olpc: link /camera to /image-sensor | Lubomir Rintel | 1 | -0/+6 |
2020-03-12 | pc/olpc: split gxfb, smbus and dcon into separate nodes | Lubomir Rintel | 4 | -8/+16 |
2020-03-12 | gxfb: move maybe-set-cmos from dcon | Lubomir Rintel | 1 | -0/+9 |
2020-03-12 | pc/olpc: add the /embedded-controller node | Lubomir Rintel | 1 | -0/+4 |
2020-03-12 | pc/olpc: add model and compatible strings to the root node | Lubomir Rintel | 1 | -0/+3 |
2020-03-12 | pc/olpc: add /panel node | Lubomir Rintel | 1 | -0/+1 |
2020-03-12 | x86/olpc: add GPIO pin definitions | Lubomir Rintel | 2 | -0/+15 |
2020-03-12 | geode/gpio: make /isa node a gpio-controller | Lubomir Rintel | 6 | -3/+3 |
2020-03-12 | x86/olpc: enable device tree flattening | Lubomir Rintel | 1 | -0/+1 |
2020-03-12 | x86/linux: add support for flattening the device tree | Lubomir Rintel | 1 | -0/+17 |
2020-03-12 | gitignore: ignore cpu/x86/pc/olpc/build/testicons/ | Lubomir Rintel | 1 | -0/+1 |
2020-03-12 | olpc/via: force IASL output | Lubomir Rintel | 1 | -2/+2 |
2019-10-29 | arm/olpc: drop make-sensor-node from gpio-i2c | Lubomir Rintel | 1 | -14/+0 |
2019-10-29 | olpc/1.75: include the panel device from the panel.fth | Lubomir Rintel | 1 | -14/+2 |
2019-08-12 | arm/linux: drop an extra copy of the loaded address | Lubomir Rintel | 1 | -1/+1 |
2019-05-09 | Merge pull request #2 from lkundrak/lr/vivante | James Cameron | 3 | -12/+29 |
2019-05-09 | Merge pull request #1 from lkundrak/lr/lcdclk | James Cameron | 1 | -1/+1 |
2019-05-08 | olpc/lcd: fix a typo | Lubomir Rintel | 1 | -1/+1 |
2019-05-08 | mmp2/galcore: drive the BUS and GC clocks from USB_PLL | Lubomir Rintel | 1 | -0/+8 |
2019-05-08 | mmp2/galcore: make compatible with vivante,gc | Lubomir Rintel | 1 | -4/+11 |
2019-05-08 | olpc: include mmp2/galcore on MMP2 | Lubomir Rintel | 2 | -8/+3 |
2019-05-08 | mmp2/clk: provide some more clocks | Lubomir Rintel | 1 | -1/+9 |
2019-05-08 | mmp2/galcore: fix a typo | Lubomir Rintel | 1 | -2/+1 |
2019-04-20 | q4e01ja | James Cameron | 2 | -2/+1 |
2019-04-20 | q4e00ja | James Cameron | 1 | -2/+2 |
2019-04-19 | olpc/lcd: add /chosen/framebuffer simple-framebuffer node | Lubomir Rintel | 1 | -1/+31 |
2019-04-19 | olpc: drop /apbc and /pmua on XO-1.75 | Lubomir Rintel | 1 | -0/+2 |
2019-04-19 | olpc: switch UART to clock from /clocks | Lubomir Rintel | 1 | -4/+4 |
2019-04-19 | olpc: switch SPI to clock from /clocks | Lubomir Rintel | 1 | -1/+1 |
2019-04-19 | olpc: switch /display to clock from /clocks | Lubomir Rintel | 1 | -2/+8 |
2019-04-19 | olpc: remove clock from /ap-sp | Lubomir Rintel | 1 | -1/+0 |
2019-04-19 | olpc: switch /usb to clock from /clocks | Lubomir Rintel | 1 | -1/+1 |
2019-04-19 | olpc: switch vmeta to clock from /clocks | Lubomir Rintel | 1 | -1/+1 |
2019-04-19 | olpc: switch audio to clock from /clocks | Lubomir Rintel | 2 | -3/+3 |
2019-04-19 | olpc: switch SDHCI to clock from /clocks | Lubomir Rintel | 2 | -3/+3 |
2019-04-19 | mmp2: switch TWSI to clock from /clocks | Lubomir Rintel | 2 | -8/+8 |
2019-04-19 | mmp2: switch /timer to clock from /clocks | Lubomir Rintel | 1 | -1/+1 |
2019-04-19 | mmp2: switch /rtc to clock from /clocks | Lubomir Rintel | 1 | -1/+1 |
2019-04-19 | mmp2: switch /gpio to clock from /clocks | Lubomir Rintel | 1 | -1/+1 |
2019-04-19 | mmp2: switch galcore to clock from /clocks | Lubomir Rintel | 2 | -1/+2 |
2019-04-19 | mmp2/clk: move my-clock-on/off from pmua.fth to clk.fth | Lubomir Rintel | 2 | -15/+15 |
2019-04-19 | mmp2/clk: add AUDIO clock management | Lubomir Rintel | 1 | -0/+65 |
2019-04-19 | mmp2/clk: add CCIC0 clock management | Lubomir Rintel | 1 | -0/+68 |
2019-04-19 | mmp2/clk: add bogus clock numbers for undocumented clocks | Lubomir Rintel | 1 | -0/+5 |
2019-04-19 | mmp2/clk: add /clocks node | Lubomir Rintel | 2 | -0/+102 |
2019-04-19 | olpc/1.75: make /sdhci@d4281000 (emmc) match mrvl,pxav3-mmc binding | Lubomir Rintel | 1 | -1/+4 |
2019-04-19 | olpc/1.75: make /sdhci@d4280800 (wlan) match mrvl,pxav3-mmc binding | Lubomir Rintel | 1 | -1/+6 |
2019-04-19 | olpc/1.75: make sdhci@d4280000 (ext) match mrvl,pxav3-mmc binding | Lubomir Rintel | 1 | -1/+4 |
2019-04-19 | olpc/sdhci: add /pwrseq0 power sequencer for wlan | Lubomir Rintel | 2 | -0/+8 |
2019-04-19 | olpc/sdhci: add /fixedregulator0 regulator for /wlan | Lubomir Rintel | 2 | -0/+12 |
2019-04-19 | olpc/1.75: move the /panel from /display to / | Lubomir Rintel | 1 | -3/+1 |
2019-04-19 | olpc/1.75: make /panel compatible with innolux,ls075at011 | Lubomir Rintel | 1 | -0/+2 |
2019-04-19 | olpc/1.75: connect the /panel to the /dcon | Lubomir Rintel | 1 | -0/+8 |
2019-04-19 | olpc/lcd: connect the /display to the /dcon | Lubomir Rintel | 1 | -0/+8 |
2019-04-19 | olpc: add /reserved-memory/framebuffer for Armada DRM | Lubomir Rintel | 1 | -0/+17 |
2019-04-19 | olpc/lcd: make /display compatible with marvell,mmp2-lcd | Lubomir Rintel | 1 | -1/+3 |
2019-04-19 | olpc: link the /camera and /image-sensor into a device graph | Lubomir Rintel | 1 | -0/+9 |
2019-04-19 | olpc/gpio-i2c: specify i2c-gpio,timeout-ms for /camera-i2c | Lubomir Rintel | 1 | -0/+2 |
2019-04-19 | olpc/gpio-i2c: mark SDA and SCL lines open drain | Lubomir Rintel | 1 | -8/+10 |
2019-04-19 | olpc/gpio-i2c: use zero #size-cells | Lubomir Rintel | 1 | -8/+8 |
2019-04-19 | olpc/gpio-i2c: add powerdown-gpios and reset-gpios to /image-sensor | Lubomir Rintel | 1 | -0/+3 |
2019-04-19 | olpc: make /image-sensor compatible with ovti,ov7670 | Lubomir Rintel | 1 | -1/+1 |
2019-04-19 | olpc: add /gpio-keys node | Lubomir Rintel | 1 | -0/+2 |
2019-04-19 | olpc: add /l2-cache node | Lubomir Rintel | 1 | -0/+6 |
2019-04-19 | olpc/usb: rename the clock to match marvell,pxau2o-ehci binding | Lubomir Rintel | 1 | -1/+1 |
2019-04-19 | olpc/usb: link the PHY node to /usb | Lubomir Rintel | 1 | -4/+2 |
2019-04-19 | marvell/utmiphy: make /usb2-phy compatible with marvell,mmp2-usb-phy | Lubomir Rintel | 1 | -0/+3 |
2019-04-19 | olpc/accelerometer: make /i2c/accelerometer compatible with st,lis3lv02d | Lubomir Rintel | 1 | -0/+1 |
2019-04-19 | olpc/rtc: make /i2c/rtc compatible with dallas,ds1338 | Lubomir Rintel | 1 | -0/+1 |
2019-04-19 | mmp2/gpio: make /gpio be compatible with marvell,mmp2-gpio | Lubomir Rintel | 1 | -0/+1 |
2019-04-19 | mmp2/gpio: add ranges property to /gpio | Lubomir Rintel | 1 | -0/+1 |
2019-04-19 | mmp2/gpio: fix the /gpio #interrupt-cells | Lubomir Rintel | 1 | -1/+1 |
2019-04-19 | mmp2/irq: add ranges property to /interrupt-controller | Lubomir Rintel | 1 | -0/+2 |
2019-04-19 | mmp2/uart: specify reg-shift property | Lubomir Rintel | 1 | -0/+2 |
2019-04-19 | olpc: include the SoC model in root node's compatible string | Lubomir Rintel | 6 | -1/+6 |
2019-04-19 | arm/linux: ignore the size from the zImage header | Lubomir Rintel | 1 | -8/+6 |
2017-07-14 | Q7C07 | James Cameron | 1 | -1/+1 |
2017-07-14 | OLPC XO-4 - add invert alternate boot flag | James Cameron | 3 | -2/+20 |
2016-10-13 | Added cpu/x86/Win32/build | Mitch Bradley | 5 | -0/+156 |
2016-01-13 | Q7C06 | James Cameron | 1 | -1/+1 |
2016-01-11 | OLPC - switch to build from git | James Cameron | 5 | -5/+11 |
2015-12-18 | ARM Simulator - Oops. We never enabled conditional execution of instructions. | tooch | 1 | -0/+4 |
2015-11-14 | ppcsim: modernize for ANSI C compilers | quozl | 2 | -2/+27 |
2015-11-14 | ppc: "${BP}/forth/lib/debug.fth:45: cntx ?" [patch] | quozl | 1 | -4/+4 |
2015-10-01 | Emulator ROM build - added Bochs driver to the dropin set, from Marcin Cieslak | quozl | 1 | -0/+2 |
2015-10-01 | PPC - der! writes to wrong register, der! is unused elsewhere in Open Firmwar... | quozl | 1 | -1/+1 |
2015-09-17 | Preparations for a 64-bit implementation | quozl | 3 | -8/+10 |
2015-07-15 | OLPC - keyjector, rename bootfw2.zip to fw.zip since bootfw2.zip now has anot... | quozl | 3 | -316/+24 |
2015-07-15 | OLPC - merge different keyjects, resolving divergent edits in r3706 r3710 and... | quozl | 2 | -39/+76 |
2015-07-15 | OLPC XO-4 - keyject, customise for SKU322 | quozl | 1 | -1/+14 |
2015-07-15 | OLPC XO-4 - keyject, copy from olpc.bth | quozl | 1 | -0/+227 |
2015-07-09 | OLPC XO-4 - screenshot feature extensions, cache of shots | quozl | 1 | -8/+101 |
2015-05-17 | Q4D38 | quozl | 1 | -1/+1 |
2015-03-12 | Q7C05 | quozl | 1 | -1/+1 |
2015-03-10 | Q4D37 | quozl | 1 | -1/+1 |
2015-01-30 | Q7C04 | quozl | 1 | -1/+1 |
2015-01-30 | OLPC XO-4 - suppress device tree changes when booting alternate operating sys... | quozl | 3 | -3/+12 |
2015-01-16 | OLPC - display test, add blue versus red gradient, unused | quozl | 1 | -0/+15 |
2015-01-16 | OLPC XO-4 - mmp3-gic, testing completed, reduce verbosity | quozl | 1 | -1/+1 |
2015-01-12 | Q7C03 | quozl | 1 | -1/+1 |
2015-01-08 | Q7C02 | quozl | 1 | -1/+1 |
2015-01-07 | OLPC XO-4 - mmp3-gic, remove IRQ changes to three I2C devices, matching commi... | quozl | 1 | -11/+0 |
2015-01-05 | OLPC XO-4 - trim enable-smp based on kernel patch f37e149 on arm-3.5-volansys... | quozl | 1 | -29/+0 |
2015-01-04 | Q7C01 | quozl | 1 | -1/+1 |
2015-01-04 | OLPC XO-4 - source formatting, fix use of irqdef undone in r3753 (change was ... | quozl | 2 | -55/+56 |
2015-01-02 | OLPC XO-4 - enable-smp, review comments, remove unnecessary changes | quozl | 1 | -4/+2 |
2015-01-01 | OLPC XO-4 - mmp3-gic, switch to using level triggered interrupts, for compati... | quozl | 1 | -3/+13 |
2014-12-30 | OLPC XO-4 - spin second core ready for new kernel, hack in a device tree chan... | quozl | 8 | -15/+230 |
2014-12-08 | Q7B43 | quozl | 1 | -1/+1 |
2014-11-24 | Q7B42 | quozl | 1 | -1/+1 |
2014-11-24 | [ARM] fixed signed double conversion, from Matthijs van Duin <matthijsvanduin... | quozl | 1 | -8/+8 |
2014-11-19 | Q7B41 | quozl | 1 | -1/+1 |
2014-11-19 | OLPC XO-4 - new EC firmware for Simplo LiPoly battery module | quozl | 1 | -1/+1 |
2014-11-16 | OLPC - tidy boost command output, break the line | quozl | 1 | -1/+1 |
2014-11-03 | OLPC XO-1.75 XO-4 - backport XO-4 EC recovery changes into the XO-1.75 EC rec... | quozl | 3 | -44/+227 |
2014-10-31 | OLPC XO-4 - add EC recovery | quozl | 1 | -0/+542 |
2014-10-02 | OLPC XO-1.75 XO-4 - round storage size, rewrite of r3737, not all definitions... | quozl | 1 | -1/+1 |