usb-storage: Add quirk to defeat Kindle's automatic unload

Matthias reports that the Amazon Kindle automatically removes its
emulated media if it doesn't receive another SCSI command within about
one second after a SYNCHRONIZE CACHE.  It does so even when the host
has sent a PREVENT MEDIUM REMOVAL command.  The reason for this
behavior isn't clear, although it's not hard to make some guesses.

At any rate, the results can be unexpected for anyone who tries to
access the Kindle in an unusual fashion, and in theory they can lead
to data loss (for example, if one file is closed and synchronized
while other files are still in the middle of being written).

To avoid such problems, this patch creates a new usb-storage quirks
flag telling the driver always to issue a REQUEST SENSE following a
SYNCHRONIZE CACHE command, and adds an unusual_devs entry for the
Kindle with the flag set.  This is sufficient to prevent the Kindle
from doing its automatic unload, without interfering with proper
operation.

Another possible way to deal with this would be to increase the
frequency of TEST UNIT READY polling that the kernel normally carries
out for removable-media storage devices.  However that would increase
the overall load on the system and it is not as reliable, because the
user can override the polling interval.  Changing the driver's
behavior is safer and has minimal overhead.

CC: <stable@vger.kernel.org>
Reported-and-tested-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210317190654.GA497856@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 21 insertions, 0 deletions

diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 5eb895b19c5584..f4304ce69350e3 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -656,6 +656,13 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 		need_auto_sense = 1;
 	}
 
+	/* Some devices (Kindle) require another command after SYNC CACHE */
+	if ((us->fflags & US_FL_SENSE_AFTER_SYNC) &&
+			srb->cmnd[0] == SYNCHRONIZE_CACHE) {
+		usb_stor_dbg(us, "-- sense after SYNC CACHE\n");
+		need_auto_sense = 1;
+	}
+
 	/*
 	 * If we have a failure, we're going to do a REQUEST_SENSE 
 	 * automatically.  Note that we differentiate between a command
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 5732e9691f08f2..efa972be2ee346 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2212,6 +2212,18 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
 		US_FL_NO_READ_DISC_INFO ),
 
 /*
+ * Reported by Matthias Schwarzott <zzam@gentoo.org>
+ * The Amazon Kindle treats SYNCHRONIZE CACHE as an indication that
+ * the host may be finished with it, and automatically ejects its
+ * emulated media unless it receives another command within one second.
+ */
+UNUSUAL_DEV( 0x1949, 0x0004, 0x0000, 0x9999,
+		"Amazon",
+		"Kindle",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_SENSE_AFTER_SYNC ),
+
+/*
  * Reported by Oliver Neukum <oneukum@suse.com>
  * This device morphes spontaneously into another device if the access
  * pattern of Windows isn't followed. Thus writable media would be dirty
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index 6b03fdd69d2745..712363c7a2e8ec 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -86,6 +86,8 @@
 		/* lies about caching, so always sync */	\
 	US_FLAG(NO_SAME, 0x40000000)				\
 		/* Cannot handle WRITE_SAME */			\
+	US_FLAG(SENSE_AFTER_SYNC, 0x80000000)			\
+		/* Do REQUEST_SENSE after SYNCHRONIZE_CACHE */	\
 
 #define US_FLAG(name, value)	US_FL_##name = value ,
 enum { US_DO_ALL_FLAGS };