diff options
| author | David Ertman <davidx.m.ertman@intel.com> | 2014-04-22 05:48:54 +0000 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2014-05-05 12:54:39 -0700 |
| commit | fbb9ab10a289ff28b70f53af302d119401960a39 (patch) | |
| tree | a9d989d318d76d529d9f5cfa06148090ce52a93b | |
| parent | 77e61146c67765deae45faa7db088c64a9fbca00 (diff) | |
| download | linux-fbb9ab10a289ff28b70f53af302d119401960a39.tar.gz | |
e1000e: Expand workaround for 10Mb HD throughput bug
In commit 772d05c51c4f4896c120ad418b1e91144a2ac813 "e1000e: slow performance
between two 82579 connected via 10Mbit hub", a workaround was put into place
to address the overaggressive transmit behavior of 82579 parts when connecting
at 10Mbs half-duplex.
This same behavior is seen on i217 and i218 parts as well. This patch expands
the original workaround to encompass these parts.
Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 15 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.h | 1 |
2 files changed, 12 insertions, 4 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 9b736b8625aec..059f1b0112f4b 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1314,14 +1314,17 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) return ret_val; } - /* When connected at 10Mbps half-duplex, 82579 parts are excessively + /* When connected at 10Mbps half-duplex, some parts are excessively * aggressive resulting in many collisions. To avoid this, increase * the IPG and reduce Rx latency in the PHY. */ - if ((hw->mac.type == e1000_pch2lan) && link) { + if (((hw->mac.type == e1000_pch2lan) || + (hw->mac.type == e1000_pch_lpt)) && link) { u32 reg; reg = er32(STATUS); if (!(reg & (E1000_STATUS_FD | E1000_STATUS_SPEED_MASK))) { + u16 emi_addr; + reg = er32(TIPG); reg &= ~E1000_TIPG_IPGT_MASK; reg |= 0xFF; @@ -1332,8 +1335,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) if (ret_val) return ret_val; - ret_val = - e1000_write_emi_reg_locked(hw, I82579_RX_CONFIG, 0); + if (hw->mac.type == e1000_pch2lan) + emi_addr = I82579_RX_CONFIG; + else + emi_addr = I217_RX_CONFIG; + + ret_val = e1000_write_emi_reg_locked(hw, emi_addr, 0); hw->phy.ops.release(hw); diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index bead50f9187b5..8fc6c15f31c85 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -242,6 +242,7 @@ #define I217_EEE_CAPABILITY 0x8000 /* IEEE MMD Register 3.20 */ #define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ #define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ +#define I217_RX_CONFIG 0xB20C /* Receive configuration */ #define E1000_EEE_RX_LPI_RCVD 0x0400 /* Tx LP idle received */ #define E1000_EEE_TX_LPI_RCVD 0x0800 /* Rx LP idle received */ |