Merge branch 'regulator-5.4' into regulator-next

35 files changed, 2024 insertions, 82 deletions

diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
index 3ae9f1088845b..b9f58e4803498 100644
--- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
@@ -34,6 +34,9 @@ Optional input supply properties:
   - inl67-supply: The input supply for LDO_REG3 and LDO_REG4
 
 Any standard regulator properties can be used to configure the single regulator.
+regulator-initial-mode, regulator-allowed-modes and regulator-mode could be specified
+for act8865 using mode values from dt-bindings/regulator/active-semi,8865-regulator.h
+file.
 
 The valid names for regulators are:
 	- for act8846:
@@ -47,6 +50,8 @@ The valid names for regulators are:
 Example:
 --------
 
+#include <dt-bindings/regulator/active-semi,8865-regulator.h>
+
 		i2c1: i2c@f0018000 {
 			pmic: act8865@5b {
 				compatible = "active-semi,act8865";
@@ -65,9 +70,19 @@ Example:
 						regulator-name = "VCC_1V2";
 						regulator-min-microvolt = <1100000>;
 						regulator-max-microvolt = <1300000>;
-						regulator-suspend-mem-microvolt = <1150000>;
-						regulator-suspend-standby-microvolt = <1150000>;
 						regulator-always-on;
+
+						regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>,
+									  <ACT8865_REGULATOR_MODE_LOWPOWER>;
+						regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>;
+
+						regulator-state-mem {
+							regulator-on-in-suspend;
+							regulator-suspend-min-microvolt = <1150000>;
+							regulator-suspend-max-microvolt = <1150000>;
+							regulator-changeable-in-suspend;
+							regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>;
+						};
 					};
 
 					vcc_3v3_reg: DCDC_REG3 {
@@ -82,6 +97,14 @@ Example:
 						regulator-min-microvolt = <3300000>;
 						regulator-max-microvolt = <3300000>;
 						regulator-always-on;
+
+						regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>,
+									  <ACT8865_REGULATOR_MODE_LOWPOWER>;
+						regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>;
+
+						regulator-state-mem {
+							regulator-off-in-suspend;
+						};
 					};
 
 					vddfuse_reg: LDO_REG2 {
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index a650b457085de..a78150c47aa2a 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -19,9 +19,19 @@ description:
 allOf:
   - $ref: "regulator.yaml#"
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: regulator-fixed-clock
+  required:
+    - clocks
+
 properties:
   compatible:
-    const: regulator-fixed
+    enum:
+      - const: regulator-fixed
+      - const: regulator-fixed-clock
 
   regulator-name: true
 
@@ -29,6 +39,13 @@ properties:
     description: gpio to use for enable control
     maxItems: 1
 
+  clocks:
+    description:
+      clock to use for enable control. This binding is only available if
+      the compatible is chosen to regulator-fixed-clock. The clock binding
+      is mandatory if compatible is chosen to regulator-fixed-clock.
+    maxItems: 1
+
   startup-delay-us:
     description: startup time in microseconds
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
new file mode 100644
index 0000000000000..9a90a92f2d7e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
@@ -0,0 +1,358 @@
+MediaTek MT6358 Regulator
+
+All voltage regulators provided by the MT6358 PMIC are described as the
+subnodes of the MT6358 regulators node. Each regulator is named according
+to its regulator type, buck_<name> and ldo_<name>. The definition for each
+of these nodes is defined using the standard binding for regulators at
+Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are::
+BUCK:
+  buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu,
+  buck_vs2, buck_vmodem, buck_vs1
+LDO:
+  ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio,
+  ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others,
+  ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28,
+  ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18,
+  ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28,
+  ldo_vsim2
+
+Example:
+
+	pmic {
+		compatible = "mediatek,mt6358";
+
+		mt6358regulator: mt6358regulator {
+			compatible = "mediatek,mt6358-regulator";
+
+			mt6358_vdram1_reg: buck_vdram1 {
+				regulator-compatible = "buck_vdram1";
+				regulator-name = "vdram1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2087500>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6358_vcore_reg: buck_vcore {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-always-on;
+			};
+
+			mt6358_vpa_reg: buck_vpa {
+				regulator-name = "vpa";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-ramp-delay = <50000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			mt6358_vproc11_reg: buck_vproc11 {
+				regulator-name = "vproc11";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-always-on;
+			};
+
+			mt6358_vproc12_reg: buck_vproc12 {
+				regulator-name = "vproc12";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-always-on;
+			};
+
+			mt6358_vgpu_reg: buck_vgpu {
+				regulator-name = "vgpu";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+			};
+
+			mt6358_vs2_reg: buck_vs2 {
+				regulator-name = "vs2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2087500>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6358_vmodem_reg: buck_vmodem {
+				regulator-name = "vmodem";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <900>;
+				regulator-always-on;
+			};
+
+			mt6358_vs1_reg: buck_vs1 {
+				regulator-name = "vs1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <2587500>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6358_vdram2_reg: ldo_vdram2 {
+				regulator-name = "vdram2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <3300>;
+			};
+
+			mt6358_vsim1_reg: ldo_vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <540>;
+			};
+
+			mt6358_vibr_reg: ldo_vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6358_vrf12_reg: ldo_vrf12 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			mt6358_vio18_reg: ldo_vio18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <2700>;
+				regulator-always-on;
+			};
+
+			mt6358_vusb_reg: ldo_vusb {
+				regulator-name = "vusb";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <270>;
+				regulator-always-on;
+			};
+
+			mt6358_vcamio_reg: ldo_vcamio {
+				compatible = "regulator-fixed";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vcamd_reg: ldo_vcamd {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vcn18_reg: ldo_vcn18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vfe28_reg: ldo_vfe28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vfe28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsram_proc11_reg: ldo_vsram_proc11 {
+				regulator-name = "vsram_proc11";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6358_vcn28_reg: ldo_vcn28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsram_others_reg: ldo_vsram_others {
+				regulator-name = "vsram_others";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6358_vsram_gpu_reg: ldo_vsram_gpu {
+				regulator-name = "vsram_gpu";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6358_vxo22_reg: ldo_vxo22 {
+				compatible = "regulator-fixed";
+				regulator-name = "vxo22";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-enable-ramp-delay = <120>;
+				regulator-always-on;
+			};
+
+			mt6358_vefuse_reg: ldo_vefuse {
+				regulator-name = "vefuse";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vaux18_reg: ldo_vaux18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaux18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vmch_reg: ldo_vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6358_vbif28_reg: ldo_vbif28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vbif28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsram_proc12_reg: ldo_vsram_proc12 {
+				regulator-name = "vsram_proc12";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6358_vcama1_reg: ldo_vcama1 {
+				regulator-name = "vcama1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vemc_reg: ldo_vemc {
+				regulator-name = "vemc";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+				regulator-always-on;
+			};
+
+			mt6358_vio28_reg: ldo_vio28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_va12_reg: ldo_va12 {
+				compatible = "regulator-fixed";
+				regulator-name = "va12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <270>;
+				regulator-always-on;
+			};
+
+			mt6358_vrf18_reg: ldo_vrf18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			mt6358_vcn33_bt_reg: ldo_vcn33_bt {
+				regulator-name = "vcn33_bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
+				regulator-name = "vcn33_wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vcama2_reg: ldo_vcama2 {
+				regulator-name = "vcama2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vmc_reg: ldo_vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6358_vldo28_reg: ldo_vldo28 {
+				regulator-name = "vldo28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vaud28_reg: ldo_vaud28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaud28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsim2_reg: ldo_vsim2 {
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <540>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
index 14d2eee96b3d5..bab9f71140b83 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
@@ -22,9 +22,12 @@ RPMh resource.
 
 The names used for regulator nodes must match those supported by a given PMIC.
 Supported regulator node names:
+	PM8005:		smps1 - smps4
+	PM8009:		smps1 - smps2, ldo1 - ldo7
+	PM8150:		smps1 - smps10, ldo1 - ldo18
+	PM8150L:	smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
 	PM8998:		smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
 	PMI8998:	bob
-	PM8005:		smps1 - smps4
 
 ========================
 First Level Nodes - PMIC
@@ -33,9 +36,13 @@ First Level Nodes - PMIC
 - compatible
 	Usage:      required
 	Value type: <string>
-	Definition: Must be one of: "qcom,pm8998-rpmh-regulators",
-		    "qcom,pmi8998-rpmh-regulators" or
-		    "qcom,pm8005-rpmh-regulators".
+	Definition: Must be one of below:
+		    "qcom,pm8005-rpmh-regulators"
+		    "qcom,pm8009-rpmh-regulators"
+		    "qcom,pm8150-rpmh-regulators"
+		    "qcom,pm8150l-rpmh-regulators"
+		    "qcom,pm8998-rpmh-regulators"
+		    "qcom,pmi8998-rpmh-regulators"
 
 - qcom,pmic-id
 	Usage:      required
diff --git a/Documentation/devicetree/bindings/regulator/sy8824x.txt b/Documentation/devicetree/bindings/regulator/sy8824x.txt
new file mode 100644
index 0000000000000..c5e95850c4277
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/sy8824x.txt
@@ -0,0 +1,24 @@
+SY8824C/SY8824E/SY20276 Voltage regulator
+
+Required properties:
+- compatible: Must be one of the following.
+	"silergy,sy8824c"
+	"silergy,sy8824e"
+	"silergy,sy20276"
+	"silergy,sy20278"
+- reg: I2C slave address
+
+Any property defined as part of the core regulator binding, defined in
+./regulator.txt, can also be used.
+
+Example:
+
+	vcore: regulator@00 {
+		compatible = "silergy,sy8824c";
+		reg = <0x66>;
+		regulator-name = "vcore";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
diff --git a/Documentation/devicetree/bindings/regulator/twl-regulator.txt b/Documentation/devicetree/bindings/regulator/twl-regulator.txt
index 74a91c4f8530a..549f80436debc 100644
--- a/Documentation/devicetree/bindings/regulator/twl-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/twl-regulator.txt
@@ -71,3 +71,10 @@ Example:
 		regulator-min-microvolt  = <1000000>;
 		regulator-max-microvolt  = <3000000>;
 	};
+
+For twl6030 regulators/LDOs:
+
+ - ti,retain-on-reset: Does not turn off the supplies during warm
+                       reset. Could be needed for VMMC, as TWL6030
+                       reset sequence for this signal does not comply
+                       with the SD specification.
diff --git a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
index c9919f4b92d21..94fd38b0d163f 100644
--- a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
@@ -13,6 +13,7 @@ this layer. These clocks and resets should be described in each property.
 Required properties:
 - compatible: Should be
     "socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC
+    "socionext,uniphier-pro5-usb3-regulator" - for Pro5 SoC
     "socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC
     "socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC
     "socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC
@@ -20,12 +21,12 @@ Required properties:
 - clocks: A list of phandles to the clock gate for USB3 glue layer.
 	According to the clock-names, appropriate clocks are required.
 - clock-names: Should contain
-    "gio", "link" - for Pro4 SoC
+    "gio", "link" - for Pro4 and Pro5 SoCs
     "link"        - for others
 - resets: A list of phandles to the reset control for USB3 glue layer.
 	According to the reset-names, appropriate resets are required.
 - reset-names: Should contain
-    "gio", "link" - for Pro4 SoC
+    "gio", "link" - for Pro4 and Pro5 SoCs
     "link"        - for others
 
 See Documentation/devicetree/bindings/regulator/regulator.txt
diff --git a/MAINTAINERS b/MAINTAINERS
index e7a47b5210fdd..5c1b9e4a5dd8a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17263,6 +17263,7 @@ F:	Documentation/power/regulator/
 F:	drivers/regulator/
 F:	include/dt-bindings/regulator/
 F:	include/linux/regulator/
+K:	regulator_get_optional
 
 VRF
 M:	David Ahern <dsa@cumulusnetworks.com>
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index b57093d7c01f6..3ee63531f6d5c 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -83,6 +83,7 @@ config REGULATOR_88PM8607
 config REGULATOR_ACT8865
 	tristate "Active-semi act8865 voltage regulator"
 	depends on I2C
+	depends on POWER_SUPPLY
 	select REGMAP_I2C
 	help
 	  This driver controls a active-semi act8865 voltage output
@@ -618,6 +619,15 @@ config REGULATOR_MT6323
 	  This driver supports the control of different power rails of device
 	  through regulator interface.
 
+config REGULATOR_MT6358
+	tristate "MediaTek MT6358 PMIC"
+	depends on MFD_MT6397 && BROKEN
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6358 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
 config REGULATOR_MT6380
 	tristate "MediaTek MT6380 PMIC"
 	depends on MTK_PMIC_WRAP
@@ -906,6 +916,13 @@ config REGULATOR_SY8106A
 	help
 	  This driver supports SY8106A single output regulator.
 
+config REGULATOR_SY8824X
+	tristate "Silergy SY8824C/SY8824E regulator"
+	depends on I2C && (OF || COMPILE_TEST)
+	select REGMAP_I2C
+	help
+	  This driver supports SY8824C single output regulator.
+
 config REGULATOR_TPS51632
 	tristate "TI TPS51632 Power Regulator"
 	depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index eef73b5a35a4d..2210ba56f9bd1 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o
 obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
 obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
+obj-$(CONFIG_REGULATOR_MT6358)	+= mt6358-regulator.o
 obj-$(CONFIG_REGULATOR_MT6380)	+= mt6380-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
@@ -111,6 +112,7 @@ obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o
 obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o
 obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
 obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o
+obj-$(CONFIG_REGULATOR_SY8824X) += sy8824x.o
 obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index cf72d7c6b8c9f..0fa97f934df49 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -16,8 +16,10 @@
 #include <linux/regulator/act8865.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/power_supply.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regmap.h>
+#include <dt-bindings/regulator/active-semi,8865-regulator.h>
 
 /*
  * ACT8600 Global Register Map.
@@ -89,35 +91,50 @@
  */
 #define	ACT8865_SYS_MODE	0x00
 #define	ACT8865_SYS_CTRL	0x01
+#define	ACT8865_SYS_UNLK_REGS	0x0b
 #define	ACT8865_DCDC1_VSET1	0x20
 #define	ACT8865_DCDC1_VSET2	0x21
 #define	ACT8865_DCDC1_CTRL	0x22
+#define	ACT8865_DCDC1_SUS	0x24
 #define	ACT8865_DCDC2_VSET1	0x30
 #define	ACT8865_DCDC2_VSET2	0x31
 #define	ACT8865_DCDC2_CTRL	0x32
+#define	ACT8865_DCDC2_SUS	0x34
 #define	ACT8865_DCDC3_VSET1	0x40
 #define	ACT8865_DCDC3_VSET2	0x41
 #define	ACT8865_DCDC3_CTRL	0x42
+#define	ACT8865_DCDC3_SUS	0x44
 #define	ACT8865_LDO1_VSET	0x50
 #define	ACT8865_LDO1_CTRL	0x51
+#define	ACT8865_LDO1_SUS	0x52
 #define	ACT8865_LDO2_VSET	0x54
 #define	ACT8865_LDO2_CTRL	0x55
+#define	ACT8865_LDO2_SUS	0x56
 #define	ACT8865_LDO3_VSET	0x60
 #define	ACT8865_LDO3_CTRL	0x61
+#define	ACT8865_LDO3_SUS	0x62
 #define	ACT8865_LDO4_VSET	0x64
 #define	ACT8865_LDO4_CTRL	0x65
+#define	ACT8865_LDO4_SUS	0x66
 #define	ACT8865_MSTROFF		0x20
 
 /*
  * Field Definitions.
  */
 #define	ACT8865_ENA		0x80	/* ON - [7] */
+#define	ACT8865_DIS		0x40	/* DIS - [6] */
+
 #define	ACT8865_VSEL_MASK	0x3F	/* VSET - [5:0] */
 
 
 #define ACT8600_LDO10_ENA		0x40	/* ON - [6] */
 #define ACT8600_SUDCDC_VSEL_MASK	0xFF	/* SUDCDC VSET - [7:0] */
 
+#define ACT8600_APCH_CHG_ACIN		BIT(7)
+#define ACT8600_APCH_CHG_USB		BIT(6)
+#define ACT8600_APCH_CSTATE0		BIT(5)
+#define ACT8600_APCH_CSTATE1		BIT(4)
+
 /*
  * ACT8865 voltage number
  */
@@ -217,6 +234,171 @@ static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(41400000, 248, 255, 0),
 };
 
+static int act8865_set_suspend_state(struct regulator_dev *rdev, bool enable)
+{
+	struct regmap *regmap = rdev->regmap;
+	int id = rdev->desc->id, reg, val;
+
+	switch (id) {
+	case ACT8865_ID_DCDC1:
+		reg = ACT8865_DCDC1_SUS;
+		val = 0xa8;
+		break;
+	case ACT8865_ID_DCDC2:
+		reg = ACT8865_DCDC2_SUS;
+		val = 0xa8;
+		break;
+	case ACT8865_ID_DCDC3:
+		reg = ACT8865_DCDC3_SUS;
+		val = 0xa8;
+		break;
+	case ACT8865_ID_LDO1:
+		reg = ACT8865_LDO1_SUS;
+		val = 0xe8;
+		break;
+	case ACT8865_ID_LDO2:
+		reg = ACT8865_LDO2_SUS;
+		val = 0xe8;
+		break;
+	case ACT8865_ID_LDO3:
+		reg = ACT8865_LDO3_SUS;
+		val = 0xe8;
+		break;
+	case ACT8865_ID_LDO4:
+		reg = ACT8865_LDO4_SUS;
+		val = 0xe8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (enable)
+		val |= BIT(4);
+
+	/*
+	 * Ask the PMIC to enable/disable this output when entering hibernate
+	 * mode.
+	 */
+	return regmap_write(regmap, reg, val);
+}
+
+static int act8865_set_suspend_enable(struct regulator_dev *rdev)
+{
+	return act8865_set_suspend_state(rdev, true);
+}
+
+static int act8865_set_suspend_disable(struct regulator_dev *rdev)
+{
+	return act8865_set_suspend_state(rdev, false);
+}
+
+static unsigned int act8865_of_map_mode(unsigned int mode)
+{
+	switch (mode) {
+	case ACT8865_REGULATOR_MODE_FIXED:
+		return REGULATOR_MODE_FAST;
+	case ACT8865_REGULATOR_MODE_NORMAL:
+		return REGULATOR_MODE_NORMAL;
+	case ACT8865_REGULATOR_MODE_LOWPOWER:
+		return REGULATOR_MODE_STANDBY;
+	default:
+		return REGULATOR_MODE_INVALID;
+	}
+}
+
+static int act8865_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct regmap *regmap = rdev->regmap;
+	int id = rdev_get_id(rdev);
+	int reg, val = 0;
+
+	switch (id) {
+	case ACT8865_ID_DCDC1:
+		reg = ACT8865_DCDC1_CTRL;
+		break;
+	case ACT8865_ID_DCDC2:
+		reg = ACT8865_DCDC2_CTRL;
+		break;
+	case ACT8865_ID_DCDC3:
+		reg = ACT8865_DCDC3_CTRL;
+		break;
+	case ACT8865_ID_LDO1:
+		reg = ACT8865_LDO1_CTRL;
+		break;
+	case ACT8865_ID_LDO2:
+		reg = ACT8865_LDO2_CTRL;
+		break;
+	case ACT8865_ID_LDO3:
+		reg = ACT8865_LDO3_CTRL;
+		break;
+	case ACT8865_ID_LDO4:
+		reg = ACT8865_LDO4_CTRL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+	case REGULATOR_MODE_NORMAL:
+		if (id <= ACT8865_ID_DCDC3)
+			val = BIT(5);
+		break;
+	case REGULATOR_MODE_STANDBY:
+		if (id > ACT8865_ID_DCDC3)
+			val = BIT(5);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(regmap, reg, BIT(5), val);
+}
+
+static unsigned int act8865_get_mode(struct regulator_dev *rdev)
+{
+	struct regmap *regmap = rdev->regmap;
+	int id = rdev_get_id(rdev);
+	int reg, ret, val = 0;
+
+	switch (id) {
+	case ACT8865_ID_DCDC1:
+		reg = ACT8865_DCDC1_CTRL;
+		break;
+	case ACT8865_ID_DCDC2:
+		reg = ACT8865_DCDC2_CTRL;
+		break;
+	case ACT8865_ID_DCDC3:
+		reg = ACT8865_DCDC3_CTRL;
+		break;
+	case ACT8865_ID_LDO1:
+		reg = ACT8865_LDO1_CTRL;
+		break;
+	case ACT8865_ID_LDO2:
+		reg = ACT8865_LDO2_CTRL;
+		break;
+	case ACT8865_ID_LDO3:
+		reg = ACT8865_LDO3_CTRL;
+		break;
+	case ACT8865_ID_LDO4:
+		reg = ACT8865_LDO4_CTRL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_read(regmap, reg, &val);
+	if (ret)
+		return ret;
+
+	if (id <= ACT8865_ID_DCDC3 && (val & BIT(5)))
+		return REGULATOR_MODE_FAST;
+	else if	(id > ACT8865_ID_DCDC3 && !(val & BIT(5)))
+		return REGULATOR_MODE_NORMAL;
+	else
+		return REGULATOR_MODE_STANDBY;
+}
+
 static const struct regulator_ops act8865_ops = {
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
@@ -224,24 +406,44 @@ static const struct regulator_ops act8865_ops = {
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
+	.set_mode		= act8865_set_mode,
+	.get_mode		= act8865_get_mode,
 	.is_enabled		= regulator_is_enabled_regmap,
+	.set_suspend_enable	= act8865_set_suspend_enable,
+	.set_suspend_disable	= act8865_set_suspend_disable,
 };
 
 static const struct regulator_ops act8865_ldo_ops = {
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.set_mode		= act8865_set_mode,
+	.get_mode		= act8865_get_mode,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.set_suspend_enable	= act8865_set_suspend_enable,
+	.set_suspend_disable	= act8865_set_suspend_disable,
+	.set_pull_down		= regulator_set_pull_down_regmap,
+};
+
+static const struct regulator_ops act8865_fixed_ldo_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
 };
 
-#define ACT88xx_REG(_name, _family, _id, _vsel_reg, _supply)		\
+#define ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, _ops)	\
 	[_family##_ID_##_id] = {					\
 		.name			= _name,			\
 		.of_match		= of_match_ptr(_name),		\
+		.of_map_mode		= act8865_of_map_mode,		\
 		.regulators_node	= of_match_ptr("regulators"),	\
 		.supply_name		= _supply,			\
 		.id			= _family##_ID_##_id,		\
 		.type			= REGULATOR_VOLTAGE,		\
-		.ops			= &act8865_ops,			\
+		.ops			= _ops,				\
 		.n_voltages		= ACT8865_VOLTAGE_NUM,		\
 		.linear_ranges		= act8865_voltage_ranges,	\
 		.n_linear_ranges	= ARRAY_SIZE(act8865_voltage_ranges), \
@@ -249,9 +451,17 @@ static const struct regulator_ops act8865_ldo_ops = {
 		.vsel_mask		= ACT8865_VSEL_MASK,		\
 		.enable_reg		= _family##_##_id##_CTRL,	\
 		.enable_mask		= ACT8865_ENA,			\
+		.pull_down_reg		= _family##_##_id##_CTRL,	\
+		.pull_down_mask		= ACT8865_DIS,			\
 		.owner			= THIS_MODULE,			\
 	}
 
+#define ACT88xx_REG(_name, _family, _id, _vsel_reg, _supply) \
+	ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, &act8865_ops)
+
+#define ACT88xx_LDO(_name, _family, _id, _vsel_reg, _supply) \
+	ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, &act8865_ldo_ops)
+
 static const struct regulator_desc act8600_regulators[] = {
 	ACT88xx_REG("DCDC1", ACT8600, DCDC1, VSET, "vp1"),
 	ACT88xx_REG("DCDC2", ACT8600, DCDC2, VSET, "vp2"),
@@ -281,7 +491,7 @@ static const struct regulator_desc act8600_regulators[] = {
 		.of_match = of_match_ptr("LDO_REG9"),
 		.regulators_node = of_match_ptr("regulators"),
 		.id = ACT8600_ID_LDO9,
-		.ops = &act8865_ldo_ops,
+		.ops = &act8865_fixed_ldo_ops,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = 1,
 		.fixed_uV = 3300000,
@@ -294,7 +504,7 @@ static const struct regulator_desc act8600_regulators[] = {
 		.of_match = of_match_ptr("LDO_REG10"),
 		.regulators_node = of_match_ptr("regulators"),
 		.id = ACT8600_ID_LDO10,
-		.ops = &act8865_ldo_ops,
+		.ops = &act8865_fixed_ldo_ops,
 		.type = REGULATOR_VOLTAGE,
 		.n_voltages = 1,
 		.fixed_uV = 1200000,
@@ -323,20 +533,20 @@ static const struct regulator_desc act8865_regulators[] = {
 	ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET1, "vp1"),
 	ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET1, "vp2"),
 	ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET1, "vp3"),
-	ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
-	ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
-	ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
-	ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
+	ACT88xx_LDO("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
+	ACT88xx_LDO("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
+	ACT88xx_LDO("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
+	ACT88xx_LDO("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
 };
 
 static const struct regulator_desc act8865_alt_regulators[] = {
 	ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET2, "vp1"),
 	ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET2, "vp2"),
 	ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET2, "vp3"),
-	ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
-	ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
-	ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
-	ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
+	ACT88xx_LDO("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
+	ACT88xx_LDO("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
+	ACT88xx_LDO("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
+	ACT88xx_LDO("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
 };
 
 #ifdef CONFIG_OF
@@ -372,6 +582,75 @@ static void act8865_power_off(void)
 	while (1);
 }
 
+static int act8600_charger_get_status(struct regmap *map)
+{
+	unsigned int val;
+	int ret;
+	u8 state0, state1;
+
+	ret = regmap_read(map, ACT8600_APCH_STAT, &val);
+	if (ret < 0)
+		return ret;
+
+	state0 = val & ACT8600_APCH_CSTATE0;
+	state1 = val & ACT8600_APCH_CSTATE1;
+
+	if (state0 && !state1)
+		return POWER_SUPPLY_STATUS_CHARGING;
+	if (!state0 && state1)
+		return POWER_SUPPLY_STATUS_NOT_CHARGING;
+	if (!state0 && !state1)
+		return POWER_SUPPLY_STATUS_DISCHARGING;
+
+	return POWER_SUPPLY_STATUS_UNKNOWN;
+}
+
+static int act8600_charger_get_property(struct power_supply *psy,
+		enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct regmap *map = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = act8600_charger_get_status(map);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property act8600_charger_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+};
+
+static const struct power_supply_desc act8600_charger_desc = {
+	.name = "act8600-charger",
+	.type = POWER_SUPPLY_TYPE_BATTERY,
+	.properties = act8600_charger_properties,
+	.num_properties = ARRAY_SIZE(act8600_charger_properties),
+	.get_property = act8600_charger_get_property,
+};
+
+static int act8600_charger_probe(struct device *dev, struct regmap *regmap)
+{
+	struct power_supply *charger;
+	struct power_supply_config cfg = {
+		.drv_data = regmap,
+		.of_node = dev->of_node,
+	};
+
+	charger = devm_power_supply_register(dev, &act8600_charger_desc, &cfg);
+
+	return PTR_ERR_OR_ZERO(charger);
+}
+
 static int act8865_pmic_probe(struct i2c_client *client,
 			      const struct i2c_device_id *i2c_id)
 {
@@ -483,9 +762,20 @@ static int act8865_pmic_probe(struct i2c_client *client,
 		}
 	}
 
+	if (type == ACT8600) {
+		ret = act8600_charger_probe(dev, act8865->regmap);
+		if (ret < 0) {
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Failed to probe charger");
+			return ret;
+		}
+	}
+
 	i2c_set_clientdata(client, act8865);
 
-	return 0;
+	/* Unlock expert registers for ACT8865. */
+	return type != ACT8865 ? 0 : regmap_write(act8865->regmap,
+						  ACT8865_SYS_UNLK_REGS, 0xef);
 }
 
 static const struct i2c_device_id act8865_ids[] = {
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index e0c0cf4620049..afe94470b67f7 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -381,12 +381,16 @@ static struct device_node *of_get_child_regulator(struct device_node *parent,
 		if (!regnode) {
 			regnode = of_get_child_regulator(child, prop_name);
 			if (regnode)
-				return regnode;
+				goto err_node_put;
 		} else {
-			return regnode;
+			goto err_node_put;
 		}
 	}
 	return NULL;
+
+err_node_put:
+	of_node_put(child);
+	return regnode;
 }
 
 /**
@@ -564,13 +568,15 @@ static ssize_t regulator_uV_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
-	ssize_t ret;
+	int uV;
 
 	regulator_lock(rdev);
-	ret = sprintf(buf, "%d\n", regulator_get_voltage_rdev(rdev));
+	uV = regulator_get_voltage_rdev(rdev);
 	regulator_unlock(rdev);
 
-	return ret;
+	if (uV < 0)
+		return uV;
+	return sprintf(buf, "%d\n", uV);
 }
 static DEVICE_ATTR(microvolts, 0444, regulator_uV_show, NULL);
 
@@ -5640,7 +5646,7 @@ static int __init regulator_init(void)
 /* init early to allow our consumers to complete system booting */
 core_initcall(regulator_init);
 
-static int __init regulator_late_cleanup(struct device *dev, void *data)
+static int regulator_late_cleanup(struct device *dev, void *data)
 {
 	struct regulator_dev *rdev = dev_to_rdev(dev);
 	const struct regulator_ops *ops = rdev->desc->ops;
@@ -5689,18 +5695,9 @@ unlock:
 	return 0;
 }
 
-static int __init regulator_init_complete(void)
+static void regulator_init_complete_work_function(struct work_struct *work)
 {
 	/*
-	 * Since DT doesn't provide an idiomatic mechanism for
-	 * enabling full constraints and since it's much more natural
-	 * with DT to provide them just assume that a DT enabled
-	 * system has full constraints.
-	 */
-	if (of_have_populated_dt())
-		has_full_constraints = true;
-
-	/*
 	 * Regulators may had failed to resolve their input supplies
 	 * when were registered, either because the input supply was
 	 * not registered yet or because its parent device was not
@@ -5717,6 +5714,35 @@ static int __init regulator_init_complete(void)
 	 */
 	class_for_each_device(&regulator_class, NULL, NULL,
 			      regulator_late_cleanup);
+}
+
+static DECLARE_DELAYED_WORK(regulator_init_complete_work,
+			    regulator_init_complete_work_function);
+
+static int __init regulator_init_complete(void)
+{
+	/*
+	 * Since DT doesn't provide an idiomatic mechanism for
+	 * enabling full constraints and since it's much more natural
+	 * with DT to provide them just assume that a DT enabled
+	 * system has full constraints.
+	 */
+	if (of_have_populated_dt())
+		has_full_constraints = true;
+
+	/*
+	 * We punt completion for an arbitrary amount of time since
+	 * systems like distros will load many drivers from userspace
+	 * so consumers might not always be ready yet, this is
+	 * particularly an issue with laptops where this might bounce
+	 * the display off then on.  Ideally we'd get a notification
+	 * from userspace when this happens but we don't so just wait
+	 * a bit and hope we waited long enough.  It'd be better if
+	 * we'd only do this on systems that need it, and a kernel
+	 * command line option might be useful.
+	 */
+	schedule_delayed_work(&regulator_init_complete_work,
+			      msecs_to_jiffies(30000));
 
 	return 0;
 }
diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c
index 2ffc64622451e..56f3f72d77075 100644
--- a/drivers/regulator/da9062-regulator.c
+++ b/drivers/regulator/da9062-regulator.c
@@ -1032,10 +1032,8 @@ static int da9062_regulator_probe(struct platform_device *pdev)
 
 	/* LDOs overcurrent event support */
 	irq = platform_get_irq_byname(pdev, "LDO_LIM");
-	if (irq < 0) {
-		dev_err(&pdev->dev, "Failed to get IRQ.\n");
+	if (irq < 0)
 		return irq;
-	}
 	regulators->irq_ldo_lim = irq;
 
 	ret = devm_request_threaded_irq(&pdev->dev, irq,
diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c
index 02f816318fba9..28b1b20f45bd1 100644
--- a/drivers/regulator/da9063-regulator.c
+++ b/drivers/regulator/da9063-regulator.c
@@ -863,10 +863,8 @@ static int da9063_regulator_probe(struct platform_device *pdev)
 
 	/* LDOs overcurrent event support */
 	irq = platform_get_irq_byname(pdev, "LDO_LIM");
-	if (irq < 0) {
-		dev_err(&pdev->dev, "Failed to get IRQ.\n");
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_threaded_irq(&pdev->dev, irq,
 				NULL, da9063_ldo_lim_event,
diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c
index 0309823d2c726..bf80748f1ccc2 100644
--- a/drivers/regulator/da9211-regulator.c
+++ b/drivers/regulator/da9211-regulator.c
@@ -285,7 +285,7 @@ static struct da9211_pdata *da9211_parse_regulators_dt(
 		pdata->reg_node[n] = da9211_matches[i].of_node;
 		pdata->gpiod_ren[n] = devm_gpiod_get_from_of_node(dev,
 				  da9211_matches[i].of_node,
-				  "enable",
+				  "enable-gpios",
 				  0,
 				  GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
 				  "da9211-enable");
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 999547dde99d2..d90a6fd8cbc74 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -23,14 +23,63 @@
 #include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regulator/machine.h>
+#include <linux/clk.h>
+
 
 struct fixed_voltage_data {
 	struct regulator_desc desc;
 	struct regulator_dev *dev;
+
+	struct clk *enable_clock;
+	unsigned int clk_enable_counter;
 };
 
+struct fixed_dev_type {
+	bool has_enable_clock;
+};
+
+static const struct fixed_dev_type fixed_voltage_data = {
+	.has_enable_clock = false,
+};
+
+static const struct fixed_dev_type fixed_clkenable_data = {
+	.has_enable_clock = true,
+};
+
+static int reg_clock_enable(struct regulator_dev *rdev)
+{
+	struct fixed_voltage_data *priv = rdev_get_drvdata(rdev);
+	int ret = 0;
+
+	ret = clk_prepare_enable(priv->enable_clock);
+	if (ret)
+		return ret;
+
+	priv->clk_enable_counter++;
+
+	return ret;
+}
+
+static int reg_clock_disable(struct regulator_dev *rdev)
+{
+	struct fixed_voltage_data *priv = rdev_get_drvdata(rdev);
+
+	clk_disable_unprepare(priv->enable_clock);
+	priv->clk_enable_counter--;
+
+	return 0;
+}
+
+static int reg_clock_is_enabled(struct regulator_dev *rdev)
+{
+	struct fixed_voltage_data *priv = rdev_get_drvdata(rdev);
+
+	return priv->clk_enable_counter > 0;
+}
+
 
 /**
  * of_get_fixed_voltage_config - extract fixed_voltage_config structure info
@@ -84,10 +133,19 @@ of_get_fixed_voltage_config(struct device *dev,
 static struct regulator_ops fixed_voltage_ops = {
 };
 
+static struct regulator_ops fixed_voltage_clkenabled_ops = {
+	.enable = reg_clock_enable,
+	.disable = reg_clock_disable,
+	.is_enabled = reg_clock_is_enabled,
+};
+
 static int reg_fixed_voltage_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct fixed_voltage_config *config;
 	struct fixed_voltage_data *drvdata;
+	const struct fixed_dev_type *drvtype =
+		of_match_device(dev->driver->of_match_table, dev)->data;
 	struct regulator_config cfg = { };
 	enum gpiod_flags gflags;
 	int ret;
@@ -118,7 +176,18 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 	}
 	drvdata->desc.type = REGULATOR_VOLTAGE;
 	drvdata->desc.owner = THIS_MODULE;
-	drvdata->desc.ops = &fixed_voltage_ops;
+
+	if (drvtype->has_enable_clock) {
+		drvdata->desc.ops = &fixed_voltage_clkenabled_ops;
+
+		drvdata->enable_clock = devm_clk_get(dev, NULL);
+		if (IS_ERR(drvdata->enable_clock)) {
+			dev_err(dev, "Cant get enable-clock from devicetree\n");
+			return -ENOENT;
+		}
+	} else {
+		drvdata->desc.ops = &fixed_voltage_ops;
+	}
 
 	drvdata->desc.enable_time = config->startup_delay;
 
@@ -191,8 +260,16 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 
 #if defined(CONFIG_OF)
 static const struct of_device_id fixed_of_match[] = {
-	{ .compatible = "regulator-fixed", },
-	{},
+	{
+		.compatible = "regulator-fixed",
+		.data = &fixed_voltage_data,
+	},
+	{
+		.compatible = "regulator-fixed-clock",
+		.data = &fixed_clkenable_data,
+	},
+	{
+	},
 };
 MODULE_DEVICE_TABLE(of, fixed_of_match);
 #endif
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index 4986cc5064a1f..ca3dc3f3bb292 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -860,3 +860,24 @@ int regulator_get_current_limit_regmap(struct regulator_dev *rdev)
 	return -EINVAL;
 }
 EXPORT_SYMBOL_GPL(regulator_get_current_limit_regmap);
+
+/**
+ * regulator_bulk_set_supply_names - initialize the 'supply' fields in an array
+ *                                   of regulator_bulk_data structs
+ *
+ * @consumers: array of regulator_bulk_data entries to initialize
+ * @supply_names: array of supply name strings
+ * @num_supplies: number of supply names to initialize
+ *
+ * Note: the 'consumers' array must be the size of 'num_supplies'.
+ */
+void regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
+				     const char *const *supply_names,
+				     unsigned int num_supplies)
+{
+	unsigned int i;
+
+	for (i = 0; i < num_supplies; i++)
+		consumers[i].supply = supply_names[i];
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_set_supply_names);
diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c
index 5647e2f97ff8d..4b9f618b07e97 100644
--- a/drivers/regulator/lm363x-regulator.c
+++ b/drivers/regulator/lm363x-regulator.c
@@ -30,13 +30,13 @@
 
 /* LM3632 */
 #define LM3632_BOOST_VSEL_MAX		0x26
-#define LM3632_LDO_VSEL_MAX		0x29
+#define LM3632_LDO_VSEL_MAX		0x28
 #define LM3632_VBOOST_MIN		4500000
 #define LM3632_VLDO_MIN			4000000
 
 /* LM36274 */
 #define LM36274_BOOST_VSEL_MAX		0x3f
-#define LM36274_LDO_VSEL_MAX		0x34
+#define LM36274_LDO_VSEL_MAX		0x32
 #define LM36274_VOLTAGE_MIN		4000000
 
 /* Common */
@@ -226,7 +226,7 @@ static const struct regulator_desc lm363x_regulator_desc[] = {
 		.of_match	= "vboost",
 		.id             = LM36274_BOOST,
 		.ops            = &lm363x_boost_voltage_table_ops,
-		.n_voltages     = LM36274_BOOST_VSEL_MAX,
+		.n_voltages     = LM36274_BOOST_VSEL_MAX + 1,
 		.min_uV         = LM36274_VOLTAGE_MIN,
 		.uV_step        = LM363X_STEP_50mV,
 		.type           = REGULATOR_VOLTAGE,
@@ -239,7 +239,7 @@ static const struct regulator_desc lm363x_regulator_desc[] = {
 		.of_match	= "vpos",
 		.id             = LM36274_LDO_POS,
 		.ops            = &lm363x_regulator_voltage_table_ops,
-		.n_voltages     = LM36274_LDO_VSEL_MAX,
+		.n_voltages     = LM36274_LDO_VSEL_MAX + 1,
 		.min_uV         = LM36274_VOLTAGE_MIN,
 		.uV_step        = LM363X_STEP_50mV,
 		.type           = REGULATOR_VOLTAGE,
@@ -254,7 +254,7 @@ static const struct regulator_desc lm363x_regulator_desc[] = {
 		.of_match	= "vneg",
 		.id             = LM36274_LDO_NEG,
 		.ops            = &lm363x_regulator_voltage_table_ops,
-		.n_voltages     = LM36274_LDO_VSEL_MAX,
+		.n_voltages     = LM36274_LDO_VSEL_MAX + 1,
 		.min_uV         = LM36274_VOLTAGE_MIN,
 		.uV_step        = LM363X_STEP_50mV,
 		.type           = REGULATOR_VOLTAGE,
diff --git a/drivers/regulator/lp87565-regulator.c b/drivers/regulator/lp87565-regulator.c
index 0c440c5e28327..4ae12ac1f4c64 100644
--- a/drivers/regulator/lp87565-regulator.c
+++ b/drivers/regulator/lp87565-regulator.c
@@ -65,7 +65,6 @@ static int lp87565_buck_set_ramp_delay(struct regulator_dev *rdev,
 				       int ramp_delay)
 {
 	int id = rdev_get_id(rdev);
-	struct lp87565 *lp87565 = rdev_get_drvdata(rdev);
 	unsigned int reg;
 	int ret;
 
@@ -86,11 +85,11 @@ static int lp87565_buck_set_ramp_delay(struct regulator_dev *rdev,
 	else
 		reg = 0;
 
-	ret = regmap_update_bits(lp87565->regmap, regulators[id].ctrl2_reg,
+	ret = regmap_update_bits(rdev->regmap, regulators[id].ctrl2_reg,
 				 LP87565_BUCK_CTRL_2_SLEW_RATE,
 				 reg << __ffs(LP87565_BUCK_CTRL_2_SLEW_RATE));
 	if (ret) {
-		dev_err(lp87565->dev, "SLEW RATE write failed: %d\n", ret);
+		dev_err(&rdev->dev, "SLEW RATE write failed: %d\n", ret);
 		return ret;
 	}
 
diff --git a/drivers/regulator/lp8788-ldo.c b/drivers/regulator/lp8788-ldo.c
index 1b00f36389966..00e9bb92c326b 100644
--- a/drivers/regulator/lp8788-ldo.c
+++ b/drivers/regulator/lp8788-ldo.c
@@ -464,7 +464,7 @@ static int lp8788_config_ldo_enable_mode(struct platform_device *pdev,
 {
 	struct lp8788 *lp = ldo->lp;
 	enum lp8788_ext_ldo_en_id enable_id;
-	u8 en_mask[] = {
+	static const u8 en_mask[] = {
 		[EN_ALDO1]   = LP8788_EN_SEL_ALDO1_M,
 		[EN_ALDO234] = LP8788_EN_SEL_ALDO234_M,
 		[EN_ALDO5]   = LP8788_EN_SEL_ALDO5_M,
diff --git a/drivers/regulator/max77686-regulator.c b/drivers/regulator/max77686-regulator.c
index 8020eb57374a1..c8e579e993160 100644
--- a/drivers/regulator/max77686-regulator.c
+++ b/drivers/regulator/max77686-regulator.c
@@ -257,7 +257,7 @@ static int max77686_of_parse_cb(struct device_node *np,
 	case MAX77686_BUCK9:
 	case MAX77686_LDO20 ... MAX77686_LDO22:
 		config->ena_gpiod = gpiod_get_from_of_node(np,
-				"maxim,ena",
+				"maxim,ena-gpios",
 				0,
 				GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
 				"max77686-regulator");
diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c
index 4bca544462873..347043a5a9a7d 100644
--- a/drivers/regulator/max8660.c
+++ b/drivers/regulator/max8660.c
@@ -485,7 +485,6 @@ static int max8660_probe(struct i2c_client *client,
 		rdev = devm_regulator_register(&client->dev,
 						  &max8660_reg[id], &config);
 		if (IS_ERR(rdev)) {
-			ret = PTR_ERR(rdev);
 			dev_err(&client->dev, "failed to register %s\n",
 				max8660_reg[id].name);
 			return PTR_ERR(rdev);
diff --git a/drivers/regulator/mt6358-regulator.c b/drivers/regulator/mt6358-regulator.c
new file mode 100644
index 0000000000000..ba42682e06f36
--- /dev/null
+++ b/drivers/regulator/mt6358-regulator.c
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2019 MediaTek Inc.
+
+#include <linux/mfd/mt6358/registers.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6358-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MT6358_BUCK_MODE_AUTO	0
+#define MT6358_BUCK_MODE_FORCE_PWM	1
+
+/*
+ * MT6358 regulators' information
+ *
+ * @desc: standard fields of regulator description.
+ * @qi: Mask for query enable signal status of regulators
+ */
+struct mt6358_regulator_info {
+	struct regulator_desc desc;
+	u32 status_reg;
+	u32 qi;
+	const u32 *index_table;
+	unsigned int n_table;
+	u32 vsel_shift;
+	u32 da_vsel_reg;
+	u32 da_vsel_mask;
+	u32 da_vsel_shift;
+	u32 modeset_reg;
+	u32 modeset_mask;
+	u32 modeset_shift;
+};
+
+#define MT6358_BUCK(match, vreg, min, max, step,		\
+	volt_ranges, vosel_mask, _da_vsel_reg, _da_vsel_mask,	\
+	_da_vsel_shift, _modeset_reg, _modeset_shift)		\
+[MT6358_ID_##vreg] = {	\
+	.desc = {	\
+		.name = #vreg,	\
+		.of_match = of_match_ptr(match),	\
+		.ops = &mt6358_volt_range_ops,	\
+		.type = REGULATOR_VOLTAGE,	\
+		.id = MT6358_ID_##vreg,		\
+		.owner = THIS_MODULE,		\
+		.n_voltages = ((max) - (min)) / (step) + 1,	\
+		.linear_ranges = volt_ranges,		\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),	\
+		.vsel_reg = MT6358_BUCK_##vreg##_ELR0,	\
+		.vsel_mask = vosel_mask,	\
+		.enable_reg = MT6358_BUCK_##vreg##_CON0,	\
+		.enable_mask = BIT(0),	\
+		.of_map_mode = mt6358_map_mode,	\
+	},	\
+	.status_reg = MT6358_BUCK_##vreg##_DBG1,	\
+	.qi = BIT(0),	\
+	.da_vsel_reg = _da_vsel_reg,	\
+	.da_vsel_mask = _da_vsel_mask,	\
+	.da_vsel_shift = _da_vsel_shift,	\
+	.modeset_reg = _modeset_reg,	\
+	.modeset_mask = BIT(_modeset_shift),	\
+	.modeset_shift = _modeset_shift	\
+}
+
+#define MT6358_LDO(match, vreg, ldo_volt_table,	\
+	ldo_index_table, enreg, enbit, vosel,	\
+	vosel_mask, vosel_shift)	\
+[MT6358_ID_##vreg] = {	\
+	.desc = {	\
+		.name = #vreg,	\
+		.of_match = of_match_ptr(match),	\
+		.ops = &mt6358_volt_table_ops,	\
+		.type = REGULATOR_VOLTAGE,	\
+		.id = MT6358_ID_##vreg,	\
+		.owner = THIS_MODULE,	\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),	\
+		.volt_table = ldo_volt_table,	\
+		.vsel_reg = vosel,	\
+		.vsel_mask = vosel_mask,	\
+		.enable_reg = enreg,	\
+		.enable_mask = BIT(enbit),	\
+	},	\
+	.status_reg = MT6358_LDO_##vreg##_CON1,	\
+	.qi = BIT(15),	\
+	.index_table = ldo_index_table,	\
+	.n_table = ARRAY_SIZE(ldo_index_table),	\
+	.vsel_shift = vosel_shift,	\
+}
+
+#define MT6358_LDO1(match, vreg, min, max, step,	\
+	volt_ranges, _da_vsel_reg, _da_vsel_mask,	\
+	_da_vsel_shift, vosel, vosel_mask)	\
+[MT6358_ID_##vreg] = {	\
+	.desc = {	\
+		.name = #vreg,	\
+		.of_match = of_match_ptr(match),	\
+		.ops = &mt6358_volt_range_ops,	\
+		.type = REGULATOR_VOLTAGE,	\
+		.id = MT6358_ID_##vreg,	\
+		.owner = THIS_MODULE,	\
+		.n_voltages = ((max) - (min)) / (step) + 1,	\
+		.linear_ranges = volt_ranges,	\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),	\
+		.vsel_reg = vosel,	\
+		.vsel_mask = vosel_mask,	\
+		.enable_reg = MT6358_LDO_##vreg##_CON0,	\
+		.enable_mask = BIT(0),	\
+	},	\
+	.da_vsel_reg = _da_vsel_reg,	\
+	.da_vsel_mask = _da_vsel_mask,	\
+	.da_vsel_shift = _da_vsel_shift,	\
+	.status_reg = MT6358_LDO_##vreg##_DBG1,	\
+	.qi = BIT(0),	\
+}
+
+#define MT6358_REG_FIXED(match, vreg,	\
+	enreg, enbit, volt)	\
+[MT6358_ID_##vreg] = {	\
+	.desc = {	\
+		.name = #vreg,	\
+		.of_match = of_match_ptr(match),	\
+		.ops = &mt6358_volt_fixed_ops,	\
+		.type = REGULATOR_VOLTAGE,	\
+		.id = MT6358_ID_##vreg,	\
+		.owner = THIS_MODULE,	\
+		.n_voltages = 1,	\
+		.enable_reg = enreg,	\
+		.enable_mask = BIT(enbit),	\
+		.min_uV = volt,	\
+	},	\
+	.status_reg = MT6358_LDO_##vreg##_CON1,	\
+	.qi = BIT(15),							\
+}
+
+static const struct regulator_linear_range buck_volt_range1[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250),
+};
+
+static const struct regulator_linear_range buck_volt_range2[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 12500),
+};
+
+static const struct regulator_linear_range buck_volt_range3[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
+};
+
+static const struct regulator_linear_range buck_volt_range4[] = {
+	REGULATOR_LINEAR_RANGE(1000000, 0, 0x7f, 12500),
+};
+
+static const u32 vdram2_voltages[] = {
+	600000, 1800000,
+};
+
+static const u32 vsim_voltages[] = {
+	1700000, 1800000, 2700000, 3000000, 3100000,
+};
+
+static const u32 vibr_voltages[] = {
+	1200000, 1300000, 1500000, 1800000,
+	2000000, 2800000, 3000000, 3300000,
+};
+
+static const u32 vusb_voltages[] = {
+	3000000, 3100000,
+};
+
+static const u32 vcamd_voltages[] = {
+	900000, 1000000, 1100000, 1200000,
+	1300000, 1500000, 1800000,
+};
+
+static const u32 vefuse_voltages[] = {
+	1700000, 1800000, 1900000,
+};
+
+static const u32 vmch_vemc_voltages[] = {
+	2900000, 3000000, 3300000,
+};
+
+static const u32 vcama_voltages[] = {
+	1800000, 2500000, 2700000,
+	2800000, 2900000, 3000000,
+};
+
+static const u32 vcn33_bt_wifi_voltages[] = {
+	3300000, 3400000, 3500000,
+};
+
+static const u32 vmc_voltages[] = {
+	1800000, 2900000, 3000000, 3300000,
+};
+
+static const u32 vldo28_voltages[] = {
+	2800000, 3000000,
+};
+
+static const u32 vdram2_idx[] = {
+	0, 12,
+};
+
+static const u32 vsim_idx[] = {
+	3, 4, 8, 11, 12,
+};
+
+static const u32 vibr_idx[] = {
+	0, 1, 2, 4, 5, 9, 11, 13,
+};
+
+static const u32 vusb_idx[] = {
+	3, 4,
+};
+
+static const u32 vcamd_idx[] = {
+	3, 4, 5, 6, 7, 9, 12,
+};
+
+static const u32 vefuse_idx[] = {
+	11, 12, 13,
+};
+
+static const u32 vmch_vemc_idx[] = {
+	2, 3, 5,
+};
+
+static const u32 vcama_idx[] = {
+	0, 7, 9, 10, 11, 12,
+};
+
+static const u32 vcn33_bt_wifi_idx[] = {
+	1, 2, 3,
+};
+
+static const u32 vmc_idx[] = {
+	4, 10, 11, 13,
+};
+
+static const u32 vldo28_idx[] = {
+	1, 3,
+};
+
+static unsigned int mt6358_map_mode(unsigned int mode)
+{
+	return mode == MT6358_BUCK_MODE_AUTO ?
+		REGULATOR_MODE_NORMAL : REGULATOR_MODE_FAST;
+}
+
+static int mt6358_set_voltage_sel(struct regulator_dev *rdev,
+				  unsigned int selector)
+{
+	int idx, ret;
+	const u32 *pvol;
+	struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
+
+	pvol = info->index_table;
+
+	idx = pvol[selector];
+	ret = regmap_update_bits(rdev->regmap, info->desc.vsel_reg,
+				 info->desc.vsel_mask,
+				 idx << info->vsel_shift);
+
+	return ret;
+}
+
+static int mt6358_get_voltage_sel(struct regulator_dev *rdev)
+{
+	int idx, ret;
+	u32 selector;
+	struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
+	const u32 *pvol;
+
+	ret = regmap_read(rdev->regmap, info->desc.vsel_reg, &selector);
+	if (ret != 0) {
+		dev_info(&rdev->dev,
+			 "Failed to get mt6358 %s vsel reg: %d\n",
+			 info->desc.name, ret);
+		return ret;
+	}
+
+	selector = (selector & info->desc.vsel_mask) >> info->vsel_shift;
+	pvol = info->index_table;
+	for (idx = 0; idx < info->desc.n_voltages; idx++) {
+		if (pvol[idx] == selector)
+			return idx;
+	}
+
+	return -EINVAL;
+}
+
+static int mt6358_get_buck_voltage_sel(struct regulator_dev *rdev)
+{
+	int ret, regval;
+	struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
+
+	ret = regmap_read(rdev->regmap, info->da_vsel_reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev,
+			"Failed to get mt6358 Buck %s vsel reg: %d\n",
+			info->desc.name, ret);
+		return ret;
+	}
+
+	ret = (regval >> info->da_vsel_shift) & info->da_vsel_mask;
+
+	return ret;
+}
+
+static int mt6358_get_status(struct regulator_dev *rdev)
+{
+	int ret;
+	u32 regval;
+	struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
+
+	ret = regmap_read(rdev->regmap, info->status_reg, &regval);
+	if (ret != 0) {
+		dev_info(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+		return ret;
+	}
+
+	return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static int mt6358_regulator_set_mode(struct regulator_dev *rdev,
+				     unsigned int mode)
+{
+	struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
+	int val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = MT6358_BUCK_MODE_FORCE_PWM;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = MT6358_BUCK_MODE_AUTO;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dev_dbg(&rdev->dev, "mt6358 buck set_mode %#x, %#x, %#x, %#x\n",
+		info->modeset_reg, info->modeset_mask,
+		info->modeset_shift, val);
+
+	val <<= info->modeset_shift;
+
+	return regmap_update_bits(rdev->regmap, info->modeset_reg,
+				  info->modeset_mask, val);
+}
+
+static unsigned int mt6358_regulator_get_mode(struct regulator_dev *rdev)
+{
+	struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret, regval;
+
+	ret = regmap_read(rdev->regmap, info->modeset_reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev,
+			"Failed to get mt6358 buck mode: %d\n", ret);
+		return ret;
+	}
+
+	switch ((regval & info->modeset_mask) >> info->modeset_shift) {
+	case MT6358_BUCK_MODE_AUTO:
+		return REGULATOR_MODE_NORMAL;
+	case MT6358_BUCK_MODE_FORCE_PWM:
+		return REGULATOR_MODE_FAST;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct regulator_ops mt6358_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = mt6358_get_buck_voltage_sel,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6358_get_status,
+	.set_mode = mt6358_regulator_set_mode,
+	.get_mode = mt6358_regulator_get_mode,
+};
+
+static const struct regulator_ops mt6358_volt_table_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = mt6358_set_voltage_sel,
+	.get_voltage_sel = mt6358_get_voltage_sel,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6358_get_status,
+};
+
+static const struct regulator_ops mt6358_volt_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6358_get_status,
+};
+
+/* The array is indexed by id(MT6358_ID_XXX) */
+static struct mt6358_regulator_info mt6358_regulators[] = {
+	MT6358_BUCK("buck_vdram1", VDRAM1, 500000, 2087500, 12500,
+		    buck_volt_range2, 0x7f, MT6358_BUCK_VDRAM1_DBG0, 0x7f,
+		    0, MT6358_VDRAM1_ANA_CON0, 8),
+	MT6358_BUCK("buck_vcore", VCORE, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VCORE_DBG0, 0x7f,
+		    0, MT6358_VCORE_VGPU_ANA_CON0, 1),
+	MT6358_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
+		    buck_volt_range3, 0x3f, MT6358_BUCK_VPA_DBG0, 0x3f, 0,
+		    MT6358_VPA_ANA_CON0, 3),
+	MT6358_BUCK("buck_vproc11", VPROC11, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VPROC11_DBG0, 0x7f,
+		    0, MT6358_VPROC_ANA_CON0, 1),
+	MT6358_BUCK("buck_vproc12", VPROC12, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VPROC12_DBG0, 0x7f,
+		    0, MT6358_VPROC_ANA_CON0, 2),
+	MT6358_BUCK("buck_vgpu", VGPU, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VGPU_ELR0, 0x7f, 0,
+		    MT6358_VCORE_VGPU_ANA_CON0, 2),
+	MT6358_BUCK("buck_vs2", VS2, 500000, 2087500, 12500,
+		    buck_volt_range2, 0x7f, MT6358_BUCK_VS2_DBG0, 0x7f, 0,
+		    MT6358_VS2_ANA_CON0, 8),
+	MT6358_BUCK("buck_vmodem", VMODEM, 500000, 1293750, 6250,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VMODEM_DBG0, 0x7f,
+		    0, MT6358_VMODEM_ANA_CON0, 8),
+	MT6358_BUCK("buck_vs1", VS1, 1000000, 2587500, 12500,
+		    buck_volt_range4, 0x7f, MT6358_BUCK_VS1_DBG0, 0x7f, 0,
+		    MT6358_VS1_ANA_CON0, 8),
+	MT6358_REG_FIXED("ldo_vrf12", VRF12,
+			 MT6358_LDO_VRF12_CON0, 0, 1200000),
+	MT6358_REG_FIXED("ldo_vio18", VIO18,
+			 MT6358_LDO_VIO18_CON0, 0, 1800000),
+	MT6358_REG_FIXED("ldo_vcamio", VCAMIO,
+			 MT6358_LDO_VCAMIO_CON0, 0, 1800000),
+	MT6358_REG_FIXED("ldo_vcn18", VCN18, MT6358_LDO_VCN18_CON0, 0, 1800000),
+	MT6358_REG_FIXED("ldo_vfe28", VFE28, MT6358_LDO_VFE28_CON0, 0, 2800000),
+	MT6358_REG_FIXED("ldo_vcn28", VCN28, MT6358_LDO_VCN28_CON0, 0, 2800000),
+	MT6358_REG_FIXED("ldo_vxo22", VXO22, MT6358_LDO_VXO22_CON0, 0, 2200000),
+	MT6358_REG_FIXED("ldo_vaux18", VAUX18,
+			 MT6358_LDO_VAUX18_CON0, 0, 1800000),
+	MT6358_REG_FIXED("ldo_vbif28", VBIF28,
+			 MT6358_LDO_VBIF28_CON0, 0, 2800000),
+	MT6358_REG_FIXED("ldo_vio28", VIO28, MT6358_LDO_VIO28_CON0, 0, 2800000),
+	MT6358_REG_FIXED("ldo_va12", VA12, MT6358_LDO_VA12_CON0, 0, 1200000),
+	MT6358_REG_FIXED("ldo_vrf18", VRF18, MT6358_LDO_VRF18_CON0, 0, 1800000),
+	MT6358_REG_FIXED("ldo_vaud28", VAUD28,
+			 MT6358_LDO_VAUD28_CON0, 0, 2800000),
+	MT6358_LDO("ldo_vdram2", VDRAM2, vdram2_voltages, vdram2_idx,
+		   MT6358_LDO_VDRAM2_CON0, 0, MT6358_LDO_VDRAM2_ELR0, 0x10, 0),
+	MT6358_LDO("ldo_vsim1", VSIM1, vsim_voltages, vsim_idx,
+		   MT6358_LDO_VSIM1_CON0, 0, MT6358_VSIM1_ANA_CON0, 0xf00, 8),
+	MT6358_LDO("ldo_vibr", VIBR, vibr_voltages, vibr_idx,
+		   MT6358_LDO_VIBR_CON0, 0, MT6358_VIBR_ANA_CON0, 0xf00, 8),
+	MT6358_LDO("ldo_vusb", VUSB, vusb_voltages, vusb_idx,
+		   MT6358_LDO_VUSB_CON0_0, 0, MT6358_VUSB_ANA_CON0, 0x700, 8),
+	MT6358_LDO("ldo_vcamd", VCAMD, vcamd_voltages, vcamd_idx,
+		   MT6358_LDO_VCAMD_CON0, 0, MT6358_VCAMD_ANA_CON0, 0xf00, 8),
+	MT6358_LDO("ldo_vefuse", VEFUSE, vefuse_voltages, vefuse_idx,
+		   MT6358_LDO_VEFUSE_CON0, 0, MT6358_VEFUSE_ANA_CON0, 0xf00, 8),
+	MT6358_LDO("ldo_vmch", VMCH, vmch_vemc_voltages, vmch_vemc_idx,
+		   MT6358_LDO_VMCH_CON0, 0, MT6358_VMCH_ANA_CON0, 0x700, 8),
+	MT6358_LDO("ldo_vcama1", VCAMA1, vcama_voltages, vcama_idx,
+		   MT6358_LDO_VCAMA1_CON0, 0, MT6358_VCAMA1_ANA_CON0, 0xf00, 8),
+	MT6358_LDO("ldo_vemc", VEMC, vmch_vemc_voltages, vmch_vemc_idx,
+		   MT6358_LDO_VEMC_CON0, 0, MT6358_VEMC_ANA_CON0, 0x700, 8),
+	MT6358_LDO("ldo_vcn33_bt", VCN33_BT, vcn33_bt_wifi_voltages,
+		   vcn33_bt_wifi_idx, MT6358_LDO_VCN33_CON0_0,
+		   0, MT6358_VCN33_ANA_CON0, 0x300, 8),
+	MT6358_LDO("ldo_vcn33_wifi", VCN33_WIFI, vcn33_bt_wifi_voltages,
+		   vcn33_bt_wifi_idx, MT6358_LDO_VCN33_CON0_1,
+		   0, MT6358_VCN33_ANA_CON0, 0x300, 8),
+	MT6358_LDO("ldo_vcama2", VCAMA2, vcama_voltages, vcama_idx,
+		   MT6358_LDO_VCAMA2_CON0, 0, MT6358_VCAMA2_ANA_CON0, 0xf00, 8),
+	MT6358_LDO("ldo_vmc", VMC, vmc_voltages, vmc_idx,
+		   MT6358_LDO_VMC_CON0, 0, MT6358_VMC_ANA_CON0, 0xf00, 8),
+	MT6358_LDO("ldo_vldo28", VLDO28, vldo28_voltages, vldo28_idx,
+		   MT6358_LDO_VLDO28_CON0_0, 0,
+		   MT6358_VLDO28_ANA_CON0, 0x300, 8),
+	MT6358_LDO("ldo_vsim2", VSIM2, vsim_voltages, vsim_idx,
+		   MT6358_LDO_VSIM2_CON0, 0, MT6358_VSIM2_ANA_CON0, 0xf00, 8),
+	MT6358_LDO1("ldo_vsram_proc11", VSRAM_PROC11, 500000, 1293750, 6250,
+		    buck_volt_range1, MT6358_LDO_VSRAM_PROC11_DBG0, 0x7f, 8,
+		    MT6358_LDO_VSRAM_CON0, 0x7f),
+	MT6358_LDO1("ldo_vsram_others", VSRAM_OTHERS, 500000, 1293750, 6250,
+		    buck_volt_range1, MT6358_LDO_VSRAM_OTHERS_DBG0, 0x7f, 8,
+		    MT6358_LDO_VSRAM_CON2, 0x7f),
+	MT6358_LDO1("ldo_vsram_gpu", VSRAM_GPU, 500000, 1293750, 6250,
+		    buck_volt_range1, MT6358_LDO_VSRAM_GPU_DBG0, 0x7f, 8,
+		    MT6358_LDO_VSRAM_CON3, 0x7f),
+	MT6358_LDO1("ldo_vsram_proc12", VSRAM_PROC12, 500000, 1293750, 6250,
+		    buck_volt_range1, MT6358_LDO_VSRAM_PROC12_DBG0, 0x7f, 8,
+		    MT6358_LDO_VSRAM_CON1, 0x7f),
+};
+
+static int mt6358_regulator_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6397 = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	int i;
+
+	for (i = 0; i < MT6358_MAX_REGULATOR; i++) {
+		config.dev = &pdev->dev;
+		config.driver_data = &mt6358_regulators[i];
+		config.regmap = mt6397->regmap;
+
+		rdev = devm_regulator_register(&pdev->dev,
+					       &mt6358_regulators[i].desc,
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register %s\n",
+				mt6358_regulators[i].desc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id mt6358_platform_ids[] = {
+	{"mt6358-regulator", 0},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6358_platform_ids);
+
+static struct platform_driver mt6358_regulator_driver = {
+	.driver = {
+		.name = "mt6358-regulator",
+	},
+	.probe = mt6358_regulator_probe,
+	.id_table = mt6358_platform_ids,
+};
+
+module_platform_driver(mt6358_regulator_driver);
+
+MODULE_AUTHOR("Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6358 PMIC");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index b2c2d01d16370..db6c085da65ec 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -50,6 +50,20 @@ enum rpmh_regulator_type {
 #define PMIC4_BOB_MODE_AUTO			2
 #define PMIC4_BOB_MODE_PWM			3
 
+#define PMIC5_LDO_MODE_RETENTION		3
+#define PMIC5_LDO_MODE_LPM			4
+#define PMIC5_LDO_MODE_HPM			7
+
+#define PMIC5_SMPS_MODE_RETENTION		3
+#define PMIC5_SMPS_MODE_PFM			4
+#define PMIC5_SMPS_MODE_AUTO			6
+#define PMIC5_SMPS_MODE_PWM			7
+
+#define PMIC5_BOB_MODE_PASS			2
+#define PMIC5_BOB_MODE_PFM			4
+#define PMIC5_BOB_MODE_AUTO			6
+#define PMIC5_BOB_MODE_PWM			7
+
 /**
  * struct rpmh_vreg_hw_data - RPMh regulator hardware configurations
  * @regulator_type:		RPMh accelerator type used to manage this
@@ -488,6 +502,14 @@ static const int pmic_mode_map_pmic4_ldo[REGULATOR_MODE_STANDBY + 1] = {
 	[REGULATOR_MODE_FAST]    = -EINVAL,
 };
 
+static const int pmic_mode_map_pmic5_ldo[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = PMIC5_LDO_MODE_RETENTION,
+	[REGULATOR_MODE_IDLE]    = PMIC5_LDO_MODE_LPM,
+	[REGULATOR_MODE_NORMAL]  = PMIC5_LDO_MODE_HPM,
+	[REGULATOR_MODE_FAST]    = -EINVAL,
+};
+
 static unsigned int rpmh_regulator_pmic4_ldo_of_map_mode(unsigned int rpmh_mode)
 {
 	unsigned int mode;
@@ -518,6 +540,14 @@ static const int pmic_mode_map_pmic4_smps[REGULATOR_MODE_STANDBY + 1] = {
 	[REGULATOR_MODE_FAST]    = PMIC4_SMPS_MODE_PWM,
 };
 
+static const int pmic_mode_map_pmic5_smps[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = PMIC5_SMPS_MODE_RETENTION,
+	[REGULATOR_MODE_IDLE]    = PMIC5_SMPS_MODE_PFM,
+	[REGULATOR_MODE_NORMAL]  = PMIC5_SMPS_MODE_AUTO,
+	[REGULATOR_MODE_FAST]    = PMIC5_SMPS_MODE_PWM,
+};
+
 static unsigned int
 rpmh_regulator_pmic4_smps_of_map_mode(unsigned int rpmh_mode)
 {
@@ -552,6 +582,14 @@ static const int pmic_mode_map_pmic4_bob[REGULATOR_MODE_STANDBY + 1] = {
 	[REGULATOR_MODE_FAST]    = PMIC4_BOB_MODE_PWM,
 };
 
+static const int pmic_mode_map_pmic5_bob[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = -EINVAL,
+	[REGULATOR_MODE_IDLE]    = PMIC5_BOB_MODE_PFM,
+	[REGULATOR_MODE_NORMAL]  = PMIC5_BOB_MODE_AUTO,
+	[REGULATOR_MODE_FAST]    = PMIC5_BOB_MODE_PWM,
+};
+
 static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int rpmh_mode)
 {
 	unsigned int mode;
@@ -637,6 +675,72 @@ static const struct rpmh_vreg_hw_data pmic4_lvs = {
 	/* LVS hardware does not support voltage or mode configuration. */
 };
 
+static const struct rpmh_vreg_hw_data pmic5_pldo = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(1504000, 0, 255, 8000),
+	.n_voltages = 256,
+	.hpm_min_load_uA = 10000,
+	.pmic_mode_map = pmic_mode_map_pmic5_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_pldo_lv = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(1504000, 0, 62, 8000),
+	.n_voltages = 63,
+	.hpm_min_load_uA = 10000,
+	.pmic_mode_map = pmic_mode_map_pmic5_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_nldo = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 123, 8000),
+	.n_voltages = 124,
+	.hpm_min_load_uA = 30000,
+	.pmic_mode_map = pmic_mode_map_pmic5_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_hfsmps510 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
+	.n_voltages = 216,
+	.pmic_mode_map = pmic_mode_map_pmic5_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_ftsmps510 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 263, 4000),
+	.n_voltages = 264,
+	.pmic_mode_map = pmic_mode_map_pmic5_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(2800000, 0, 4, 1600),
+	.n_voltages = 5,
+	.pmic_mode_map = pmic_mode_map_pmic5_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_bob = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_bypass_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 135, 32000),
+	.n_voltages = 136,
+	.pmic_mode_map = pmic_mode_map_pmic5_bob,
+	.of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
+};
+
 #define RPMH_VREG(_name, _resource_name, _hw_data, _supply_name) \
 { \
 	.name		= _name, \
@@ -705,6 +809,75 @@ static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
 	{},
 };
 
+static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic5_ftsmps510, "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic5_hfsmps510,   "vdd-s4"),
+	RPMH_VREG("smps5",  "smp%s5",  &pmic5_hfsmps510,   "vdd-s5"),
+	RPMH_VREG("smps6",  "smp%s6",  &pmic5_ftsmps510, "vdd-s6"),
+	RPMH_VREG("smps7",  "smp%s7",  &pmic5_ftsmps510, "vdd-s7"),
+	RPMH_VREG("smps8",  "smp%s8",  &pmic5_ftsmps510, "vdd-s8"),
+	RPMH_VREG("smps9",  "smp%s9",  &pmic5_ftsmps510, "vdd-s9"),
+	RPMH_VREG("smps10", "smp%s10", &pmic5_ftsmps510, "vdd-s10"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_pldo,      "vdd-l2-l10"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_nldo,      "vdd-l6-l9"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_nldo,      "vdd-l6-l9"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l2-l10"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l13-l6-l17"),
+	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l6-l17"),
+	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l6-l17"),
+	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	{},
+};
+
+static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic5_ftsmps510, "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic5_ftsmps510, "vdd-s4"),
+	RPMH_VREG("smps5",  "smp%s5",  &pmic5_ftsmps510, "vdd-s5"),
+	RPMH_VREG("smps6",  "smp%s6",  &pmic5_ftsmps510, "vdd-s6"),
+	RPMH_VREG("smps7",  "smp%s7",  &pmic5_ftsmps510, "vdd-s7"),
+	RPMH_VREG("smps8",  "smp%s8",  &pmic5_hfsmps510, "vdd-s8"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_pldo_lv,   "vdd-l1-l8"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo,      "vdd-l2-l3"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l2-l3"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_pldo,      "vdd-l4-l5-l6"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l4-l5-l6"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l4-l5-l6"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l7-l11"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_pldo_lv,   "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_pldo,      "vdd-l9-l10"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l9-l10"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l7-l11"),
+	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
+	{},
+};
+
+static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_hfsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_hfsmps515, "vdd-s2"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo,      "vdd-l2"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l4"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l5-l6"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l5-l6"),
+	RPMH_VREG("ldo7",   "ldo%s6",  &pmic5_pldo_lv,   "vdd-l7"),
+	{},
+};
+
 static int rpmh_regulator_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -744,6 +917,22 @@ static int rpmh_regulator_probe(struct platform_device *pdev)
 
 static const struct of_device_id rpmh_regulator_match_table[] = {
 	{
+		.compatible = "qcom,pm8005-rpmh-regulators",
+		.data = pm8005_vreg_data,
+	},
+	{
+		.compatible = "qcom,pm8009-rpmh-regulators",
+		.data = pm8009_vreg_data,
+	},
+	{
+		.compatible = "qcom,pm8150-rpmh-regulators",
+		.data = pm8150_vreg_data,
+	},
+	{
+		.compatible = "qcom,pm8150l-rpmh-regulators",
+		.data = pm8150l_vreg_data,
+	},
+	{
 		.compatible = "qcom,pm8998-rpmh-regulators",
 		.data = pm8998_vreg_data,
 	},
@@ -751,10 +940,6 @@ static const struct of_device_id rpmh_regulator_match_table[] = {
 		.compatible = "qcom,pmi8998-rpmh-regulators",
 		.data = pmi8998_vreg_data,
 	},
-	{
-		.compatible = "qcom,pm8005-rpmh-regulators",
-		.data = pm8005_vreg_data,
-	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index e7af0c53d4496..61bd5ef0806c2 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -606,7 +606,7 @@ static unsigned int rk8xx_regulator_of_map_mode(unsigned int mode)
 	case 2:
 		return REGULATOR_MODE_NORMAL;
 	default:
-		return -EINVAL;
+		return REGULATOR_MODE_INVALID;
 	}
 }
 
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 054baaadfdfdd..5bc00884cf512 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -1226,7 +1226,7 @@ common_reg:
 			goto out;
 		}
 
-		if (s2mps11->ext_control_gpiod[i]) {
+		if (config.ena_gpiod) {
 			ret = s2mps14_pmic_enable_ext_control(s2mps11,
 					regulator);
 			if (ret < 0) {
diff --git a/drivers/regulator/slg51000-regulator.c b/drivers/regulator/slg51000-regulator.c
index 4d859fef55e68..a0565daecacef 100644
--- a/drivers/regulator/slg51000-regulator.c
+++ b/drivers/regulator/slg51000-regulator.c
@@ -447,19 +447,20 @@ static int slg51000_i2c_probe(struct i2c_client *client,
 {
 	struct device *dev = &client->dev;
 	struct slg51000 *chip;
-	struct gpio_desc *cs_gpiod = NULL;
+	struct gpio_desc *cs_gpiod;
 	int error, ret;
 
 	chip = devm_kzalloc(dev, sizeof(struct slg51000), GFP_KERNEL);
 	if (!chip)
 		return -ENOMEM;
 
-	cs_gpiod = devm_gpiod_get_from_of_node(dev, dev->of_node,
-					       "dlg,cs-gpios", 0,
-					       GPIOD_OUT_HIGH
-					       | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
-					       "slg51000-cs");
-	if (!IS_ERR(cs_gpiod)) {
+	cs_gpiod = devm_gpiod_get_optional(dev, "dlg,cs",
+					   GPIOD_OUT_HIGH |
+						GPIOD_FLAGS_BIT_NONEXCLUSIVE);
+	if (IS_ERR(cs_gpiod))
+		return PTR_ERR(cs_gpiod);
+
+	if (cs_gpiod) {
 		dev_info(dev, "Found chip selector property\n");
 		chip->cs_gpiod = cs_gpiod;
 	}
diff --git a/drivers/regulator/stm32-booster.c b/drivers/regulator/stm32-booster.c
index 2a897666c6506..03f162ffd1440 100644
--- a/drivers/regulator/stm32-booster.c
+++ b/drivers/regulator/stm32-booster.c
@@ -20,7 +20,6 @@
 #define STM32MP1_SYSCFG_EN_BOOSTER_MASK	BIT(8)
 
 static const struct regulator_ops stm32h7_booster_ops = {
-	.list_voltage	= regulator_list_voltage_linear,
 	.enable		= regulator_enable_regmap,
 	.disable	= regulator_disable_regmap,
 	.is_enabled	= regulator_is_enabled_regmap,
@@ -31,7 +30,6 @@ static const struct regulator_desc stm32h7_booster_desc = {
 	.supply_name = "vdda",
 	.n_voltages = 1,
 	.type = REGULATOR_VOLTAGE,
-	.min_uV = 3300000,
 	.fixed_uV = 3300000,
 	.ramp_delay = 66000, /* up to 50us to stabilize */
 	.ops = &stm32h7_booster_ops,
@@ -53,7 +51,6 @@ static int stm32mp1_booster_disable(struct regulator_dev *rdev)
 }
 
 static const struct regulator_ops stm32mp1_booster_ops = {
-	.list_voltage	= regulator_list_voltage_linear,
 	.enable		= stm32mp1_booster_enable,
 	.disable	= stm32mp1_booster_disable,
 	.is_enabled	= regulator_is_enabled_regmap,
@@ -64,7 +61,6 @@ static const struct regulator_desc stm32mp1_booster_desc = {
 	.supply_name = "vdda",
 	.n_voltages = 1,
 	.type = REGULATOR_VOLTAGE,
-	.min_uV = 3300000,
 	.fixed_uV = 3300000,
 	.ramp_delay = 66000,
 	.ops = &stm32mp1_booster_ops,
diff --git a/drivers/regulator/sy8824x.c b/drivers/regulator/sy8824x.c
new file mode 100644
index 0000000000000..92adb4f3ee19d
--- /dev/null
+++ b/drivers/regulator/sy8824x.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// SY8824C/SY8824E regulator driver
+//
+// Copyright (C) 2019 Synaptics Incorporated
+//
+// Author: Jisheng Zhang <jszhang@kernel.org>
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#define SY8824C_BUCK_EN		(1 << 7)
+#define SY8824C_MODE		(1 << 6)
+
+struct sy8824_config {
+	/* registers */
+	unsigned int vol_reg;
+	unsigned int mode_reg;
+	unsigned int enable_reg;
+	/* Voltage range and step(linear) */
+	unsigned int vsel_min;
+	unsigned int vsel_step;
+	unsigned int vsel_count;
+};
+
+struct sy8824_device_info {
+	struct device *dev;
+	struct regulator_desc desc;
+	struct regulator_init_data *regulator;
+	const struct sy8824_config *cfg;
+};
+
+static int sy8824_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct sy8824_device_info *di = rdev_get_drvdata(rdev);
+	const struct sy8824_config *cfg = di->cfg;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		regmap_update_bits(rdev->regmap, cfg->mode_reg,
+				   SY8824C_MODE, SY8824C_MODE);
+		break;
+	case REGULATOR_MODE_NORMAL:
+		regmap_update_bits(rdev->regmap, cfg->mode_reg,
+				   SY8824C_MODE, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static unsigned int sy8824_get_mode(struct regulator_dev *rdev)
+{
+	struct sy8824_device_info *di = rdev_get_drvdata(rdev);
+	const struct sy8824_config *cfg = di->cfg;
+	u32 val;
+	int ret = 0;
+
+	ret = regmap_read(rdev->regmap, cfg->mode_reg, &val);
+	if (ret < 0)
+		return ret;
+	if (val & SY8824C_MODE)
+		return REGULATOR_MODE_FAST;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static const struct regulator_ops sy8824_regulator_ops = {
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.map_voltage = regulator_map_voltage_linear,
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_mode = sy8824_set_mode,
+	.get_mode = sy8824_get_mode,
+};
+
+static int sy8824_regulator_register(struct sy8824_device_info *di,
+			struct regulator_config *config)
+{
+	struct regulator_desc *rdesc = &di->desc;
+	const struct sy8824_config *cfg = di->cfg;
+	struct regulator_dev *rdev;
+
+	rdesc->name = "sy8824-reg";
+	rdesc->supply_name = "vin";
+	rdesc->ops = &sy8824_regulator_ops;
+	rdesc->type = REGULATOR_VOLTAGE;
+	rdesc->n_voltages = cfg->vsel_count;
+	rdesc->enable_reg = cfg->enable_reg;
+	rdesc->enable_mask = SY8824C_BUCK_EN;
+	rdesc->min_uV = cfg->vsel_min;
+	rdesc->uV_step = cfg->vsel_step;
+	rdesc->vsel_reg = cfg->vol_reg;
+	rdesc->vsel_mask = cfg->vsel_count - 1;
+	rdesc->owner = THIS_MODULE;
+
+	rdev = devm_regulator_register(di->dev, &di->desc, config);
+	return PTR_ERR_OR_ZERO(rdev);
+}
+
+static const struct regmap_config sy8824_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int sy8824_i2c_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
+	struct sy8824_device_info *di;
+	struct regulator_config config = { };
+	struct regmap *regmap;
+	int ret;
+
+	di = devm_kzalloc(dev, sizeof(struct sy8824_device_info), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	di->regulator = of_get_regulator_init_data(dev, np, &di->desc);
+	if (!di->regulator) {
+		dev_err(dev, "Platform data not found!\n");
+		return -EINVAL;
+	}
+
+	di->dev = dev;
+	di->cfg = of_device_get_match_data(dev);
+
+	regmap = devm_regmap_init_i2c(client, &sy8824_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "Failed to allocate regmap!\n");
+		return PTR_ERR(regmap);
+	}
+	i2c_set_clientdata(client, di);
+
+	config.dev = di->dev;
+	config.init_data = di->regulator;
+	config.regmap = regmap;
+	config.driver_data = di;
+	config.of_node = np;
+
+	ret = sy8824_regulator_register(di, &config);
+	if (ret < 0)
+		dev_err(dev, "Failed to register regulator!\n");
+	return ret;
+}
+
+static const struct sy8824_config sy8824c_cfg = {
+	.vol_reg = 0x00,
+	.mode_reg = 0x00,
+	.enable_reg = 0x00,
+	.vsel_min = 762500,
+	.vsel_step = 12500,
+	.vsel_count = 64,
+};
+
+static const struct sy8824_config sy8824e_cfg = {
+	.vol_reg = 0x00,
+	.mode_reg = 0x00,
+	.enable_reg = 0x00,
+	.vsel_min = 700000,
+	.vsel_step = 12500,
+	.vsel_count = 64,
+};
+
+static const struct sy8824_config sy20276_cfg = {
+	.vol_reg = 0x00,
+	.mode_reg = 0x01,
+	.enable_reg = 0x01,
+	.vsel_min = 600000,
+	.vsel_step = 10000,
+	.vsel_count = 128,
+};
+
+static const struct sy8824_config sy20278_cfg = {
+	.vol_reg = 0x00,
+	.mode_reg = 0x01,
+	.enable_reg = 0x01,
+	.vsel_min = 762500,
+	.vsel_step = 12500,
+	.vsel_count = 64,
+};
+
+static const struct of_device_id sy8824_dt_ids[] = {
+	{
+		.compatible = "silergy,sy8824c",
+		.data = &sy8824c_cfg
+	},
+	{
+		.compatible = "silergy,sy8824e",
+		.data = &sy8824e_cfg
+	},
+	{
+		.compatible = "silergy,sy20276",
+		.data = &sy20276_cfg
+	},
+	{
+		.compatible = "silergy,sy20278",
+		.data = &sy20278_cfg
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sy8824_dt_ids);
+
+static const struct i2c_device_id sy8824_id[] = {
+	{ "sy8824", },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, sy8824_id);
+
+static struct i2c_driver sy8824_regulator_driver = {
+	.driver = {
+		.name = "sy8824-regulator",
+		.of_match_table = of_match_ptr(sy8824_dt_ids),
+	},
+	.probe = sy8824_i2c_probe,
+	.id_table = sy8824_id,
+};
+module_i2c_driver(sy8824_regulator_driver);
+
+MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>");
+MODULE_DESCRIPTION("SY8824C/SY8824E regulator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/tps65132-regulator.c b/drivers/regulator/tps65132-regulator.c
index 6e22f5ebba2e8..e302bd01a0849 100644
--- a/drivers/regulator/tps65132-regulator.c
+++ b/drivers/regulator/tps65132-regulator.c
@@ -138,7 +138,7 @@ static int tps65132_of_parse_cb(struct device_node *np,
 
 	rpdata->en_gpiod = devm_fwnode_get_index_gpiod_from_child(tps->dev,
 					"enable", 0, &np->fwnode, 0, "enable");
-	if (IS_ERR(rpdata->en_gpiod)) {
+	if (IS_ERR_OR_NULL(rpdata->en_gpiod)) {
 		ret = PTR_ERR(rpdata->en_gpiod);
 
 		/* Ignore the error other than probe defer */
@@ -150,7 +150,7 @@ static int tps65132_of_parse_cb(struct device_node *np,
 	rpdata->act_dis_gpiod = devm_fwnode_get_index_gpiod_from_child(
 					tps->dev, "active-discharge", 0,
 					&np->fwnode, 0, "active-discharge");
-	if (IS_ERR(rpdata->act_dis_gpiod)) {
+	if (IS_ERR_OR_NULL(rpdata->act_dis_gpiod)) {
 		ret = PTR_ERR(rpdata->act_dis_gpiod);
 
 		/* Ignore the error other than probe defer */
diff --git a/drivers/regulator/twl6030-regulator.c b/drivers/regulator/twl6030-regulator.c
index 5fe208b381eb2..b8100c3cedad3 100644
--- a/drivers/regulator/twl6030-regulator.c
+++ b/drivers/regulator/twl6030-regulator.c
@@ -57,6 +57,9 @@ struct twlreg_info {
 #define VREG_BC_PROC		3
 #define VREG_BC_CLK_RST		4
 
+/* TWL6030 LDO register values for VREG_VOLTAGE */
+#define TWL6030_VREG_VOLTAGE_WR_S   BIT(7)
+
 /* TWL6030 LDO register values for CFG_STATE */
 #define TWL6030_CFG_STATE_OFF	0x00
 #define TWL6030_CFG_STATE_ON	0x01
@@ -68,9 +71,10 @@ struct twlreg_info {
 #define TWL6030_CFG_STATE_APP(v)	(((v) & TWL6030_CFG_STATE_APP_MASK) >>\
 						TWL6030_CFG_STATE_APP_SHIFT)
 
-/* Flags for SMPS Voltage reading */
+/* Flags for SMPS Voltage reading and LDO reading*/
 #define SMPS_OFFSET_EN		BIT(0)
 #define SMPS_EXTENDED_EN	BIT(1)
+#define TWL_6030_WARM_RESET	BIT(3)
 
 /* twl6032 SMPS EPROM values */
 #define TWL6030_SMPS_OFFSET		0xB0
@@ -250,6 +254,9 @@ twl6030ldo_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
 
+	if (info->flags & TWL_6030_WARM_RESET)
+		selector |= TWL6030_VREG_VOLTAGE_WR_S;
+
 	return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE,
 			    selector);
 }
@@ -259,6 +266,9 @@ static int twl6030ldo_get_voltage_sel(struct regulator_dev *rdev)
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
 	int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE);
 
+	if (info->flags & TWL_6030_WARM_RESET)
+		vsel &= ~TWL6030_VREG_VOLTAGE_WR_S;
+
 	return vsel;
 }
 
@@ -665,14 +675,14 @@ static int twlreg_probe(struct platform_device *pdev)
 	struct regulation_constraints	*c;
 	struct regulator_dev		*rdev;
 	struct regulator_config		config = { };
+	struct device_node		*np = pdev->dev.of_node;
 
 	template = of_device_get_match_data(&pdev->dev);
 	if (!template)
 		return -ENODEV;
 
 	id = template->desc.id;
-	initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
-						&template->desc);
+	initdata = of_get_regulator_init_data(&pdev->dev, np, &template->desc);
 	if (!initdata)
 		return -EINVAL;
 
@@ -710,10 +720,13 @@ static int twlreg_probe(struct platform_device *pdev)
 		break;
 	}
 
+	if (of_get_property(np, "ti,retain-on-reset", NULL))
+		info->flags |= TWL_6030_WARM_RESET;
+
 	config.dev = &pdev->dev;
 	config.init_data = initdata;
 	config.driver_data = info;
-	config.of_node = pdev->dev.of_node;
+	config.of_node = np;
 
 	rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
 	if (IS_ERR(rdev)) {
diff --git a/drivers/regulator/uniphier-regulator.c b/drivers/regulator/uniphier-regulator.c
index 9026d5a3e9648..2311924c31039 100644
--- a/drivers/regulator/uniphier-regulator.c
+++ b/drivers/regulator/uniphier-regulator.c
@@ -186,6 +186,10 @@ static const struct of_device_id uniphier_regulator_match[] = {
 		.data = &uniphier_pro4_usb3_data,
 	},
 	{
+		.compatible = "socionext,uniphier-pro5-usb3-regulator",
+		.data = &uniphier_pro4_usb3_data,
+	},
+	{
 		.compatible = "socionext,uniphier-pxs2-usb3-regulator",
 		.data = &uniphier_pxs2_usb3_data,
 	},
diff --git a/include/dt-bindings/regulator/active-semi,8865-regulator.h b/include/dt-bindings/regulator/active-semi,8865-regulator.h
new file mode 100644
index 0000000000000..15473dbeaf38e
--- /dev/null
+++ b/include/dt-bindings/regulator/active-semi,8865-regulator.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Device Tree binding constants for the ACT8865 PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATOR_ACT8865_H
+#define _DT_BINDINGS_REGULATOR_ACT8865_H
+
+/*
+ * These constants should be used to specify regulator modes in device tree for
+ * ACT8865 regulators as follows:
+ * ACT8865_REGULATOR_MODE_FIXED:	It is specific to DCDC regulators and it
+ *					specifies the usage of fixed-frequency
+ *					PWM.
+ *
+ * ACT8865_REGULATOR_MODE_NORMAL:	It is specific to LDO regulators and it
+ *					specifies the usage of normal mode.
+ *
+ * ACT8865_REGULATOR_MODE_LOWPOWER:	For DCDC and LDO regulators; it specify
+ *					the usage of proprietary power-saving
+ *					mode.
+ */
+
+#define ACT8865_REGULATOR_MODE_FIXED		1
+#define ACT8865_REGULATOR_MODE_NORMAL		2
+#define ACT8865_REGULATOR_MODE_LOWPOWER	3
+
+#endif
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 815983419375a..337a463915278 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -281,6 +281,12 @@ void devm_regulator_unregister_notifier(struct regulator *regulator,
 void *regulator_get_drvdata(struct regulator *regulator);
 void regulator_set_drvdata(struct regulator *regulator, void *data);
 
+/* misc helpers */
+
+void regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
+				     const char *const *supply_names,
+				     unsigned int num_supplies);
+
 #else
 
 /*
@@ -580,6 +586,13 @@ static inline int regulator_list_voltage(struct regulator *regulator, unsigned s
 	return -EINVAL;
 }
 
+static inline void
+regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
+				const char *const *supply_names,
+				unsigned int num_supplies)
+{
+}
+
 #endif
 
 static inline int regulator_set_voltage_triplet(struct regulator *regulator,
diff --git a/include/linux/regulator/mt6358-regulator.h b/include/linux/regulator/mt6358-regulator.h
new file mode 100644
index 0000000000000..1cc304946d09e
--- /dev/null
+++ b/include/linux/regulator/mt6358-regulator.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ */
+
+#ifndef __LINUX_REGULATOR_MT6358_H
+#define __LINUX_REGULATOR_MT6358_H
+
+enum {
+	MT6358_ID_VDRAM1 = 0,
+	MT6358_ID_VCORE,
+	MT6358_ID_VPA,
+	MT6358_ID_VPROC11,
+	MT6358_ID_VPROC12,
+	MT6358_ID_VGPU,
+	MT6358_ID_VS2,
+	MT6358_ID_VMODEM,
+	MT6358_ID_VS1,
+	MT6358_ID_VDRAM2 = 9,
+	MT6358_ID_VSIM1,
+	MT6358_ID_VIBR,
+	MT6358_ID_VRF12,
+	MT6358_ID_VIO18,
+	MT6358_ID_VUSB,
+	MT6358_ID_VCAMIO,
+	MT6358_ID_VCAMD,
+	MT6358_ID_VCN18,
+	MT6358_ID_VFE28,
+	MT6358_ID_VSRAM_PROC11,
+	MT6358_ID_VCN28,
+	MT6358_ID_VSRAM_OTHERS,
+	MT6358_ID_VSRAM_GPU,
+	MT6358_ID_VXO22,
+	MT6358_ID_VEFUSE,
+	MT6358_ID_VAUX18,
+	MT6358_ID_VMCH,
+	MT6358_ID_VBIF28,
+	MT6358_ID_VSRAM_PROC12,
+	MT6358_ID_VCAMA1,
+	MT6358_ID_VEMC,
+	MT6358_ID_VIO28,
+	MT6358_ID_VA12,
+	MT6358_ID_VRF18,
+	MT6358_ID_VCN33_BT,
+	MT6358_ID_VCN33_WIFI,
+	MT6358_ID_VCAMA2,
+	MT6358_ID_VMC,
+	MT6358_ID_VLDO28,
+	MT6358_ID_VAUD28,
+	MT6358_ID_VSIM2,
+	MT6358_ID_RG_MAX,
+};
+
+#define MT6358_MAX_REGULATOR	MT6358_ID_RG_MAX
+
+#endif /* __LINUX_REGULATOR_MT6358_H */