Age | Commit message (Collapse) | Author | Files | Lines |
|
PRINTK_HEADER was mainly used to prefix log messages with the module
name. Most components don't use this definition anymore. Either because
there are no log messages being generated anymore, or pr_*() were
replaced by dev_*(), which contains device and component information
already.
PRINTK_HEADER is also dropped in the function
dasd_3990_erp_handle_match_erp() in dasd_3990_erp.c from a panic() call
as panic() already provides all relevant information.
KMSG_COMPONENT was mainly used to identify a component in a long gone
kernel message catalog feature.
Remove both definition since they're either not used or alternatives
make the code slightly shorter and more readable.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-9-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
sysfs_emit() should be used in show() functions. There are still a
couple of functions that use sprintf().
Replace outstanding occurrences of sprintf() in all show() functions
with sysfs_emit().
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are two variants of the device uid string. One containing the
virtual device unit information table (vduit) identifying the device as
a virtual device located on a real device in a z/VM environment. The
other variant does not contain those additional information.
Simplify the string generation with a shorter check of an existing vduit
embedded in the snprintf() calls.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240208164248.540985-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Building dasd_eckd.o with latest clang reveals this bug:
CC drivers/s390/block/dasd_eckd.o
drivers/s390/block/dasd_eckd.c:1082:3: warning: 'snprintf' will always be truncated;
specified size is 1, but format string expands to at least 11 [-Wfortify-source]
1082 | snprintf(print_uid, sizeof(*print_uid),
| ^
drivers/s390/block/dasd_eckd.c:1087:3: warning: 'snprintf' will always be truncated;
specified size is 1, but format string expands to at least 10 [-Wfortify-source]
1087 | snprintf(print_uid, sizeof(*print_uid),
| ^
Fix this by moving and using the existing UID_STRLEN for the arrays
that are being written to. Also rename UID_STRLEN to DASD_UID_STRLEN
to clarify its scope.
Fixes: 23596961b437 ("s390/dasd: split up dasd_eckd_read_conf")
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com> # build
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1923
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230828153142.2843753-2-hca@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a sysfs attribute aq_timeouts that controls after how many
timeouts a autoquiesce event might be triggered.
The default value is 32768 which is the maximum number of retries
for the DASD device driver DASD_RETRIES_MAX. This means that the
timeout trigger will never happen.
The default value for DASD retries is 255.
Setting the value to below 255 will trigger the timeout autoquiesce
event before an IO error is generated.
Also add the check for the configured amount of timeouts and trigger
an autoquiesce event if exceeded.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-6-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a sysfs attribute to control if all IO requests will be requeued to
the blocklayer in case of an autoquiesce event or not.
A value of 1 means that in case of an autoquiesce event all IO requests
will be requeued to the blocklayer.
A value of 0 means that the device will only be stopped.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add sysfs attribute that controls the DASD autoquiesce feature.
The autoquiesce is disabled when 0 is echoed to the attribute.
A value greater than 0 will enable the feature.
The aq_mask attribute will accept an unsigned integer and the value
will be interpreted as bitmask defining the trigger events that will
lead to an automatic quiesce.
The following autoquiesce triggers will currently be available:
DASD_EER_FATALERROR 1 - any final I/O error
DASD_EER_NOPATH 2 - no remaining paths for the device
DASD_EER_STATECHANGE 3 - a state change interrupt occurred
DASD_EER_PPRCSUSPEND 4 - the device is PPRC suspended
DASD_EER_NOSPC 5 - there is no space remaining on an ESE device
DASD_EER_TIMEOUT 6 - a certain amount of timeouts occurred
DASD_EER_STARTIO 7 - the IO start function encountered an error
The currently supported maximum value is 255.
Bit 31 is reserved for internal usage.
Bit 0 is not used.
Example:
- deactivate autoquiesce
$ echo 0 > /sys/bus/ccw/0.0.1234/aq_mask
- enable autoquiesce for FATALERROR, NOPATH and TIMEOUT
(0000 0000 0000 0000 0000 0000 0100 0110 => 70)
$ echo 70 > /sys/bus/ccw/0.0.1234/aq_mask
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20230405142017.2446986-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
dasd_copy_relation->entry[] array might be accessed out of bounds if the
loop does not break.
Fixes: a91ff09d39f9 ("s390/dasd: add copy pair setup")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20221123160719.3002694-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Make use of the IBM z16 processor activity instrumentation facility
extension to count neural network processor assist operations: add a
new PMU device driver so that perf can make use of this.
- Rework memcpy_real() to avoid DAT-off mode.
- Rework absolute lowcore access code.
- Various small fixes and improvements all over the code.
* tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: remove unused bus_next field from struct zpci_dev
s390/cio: remove unused ccw_device_force_console() declaration
s390/pai: Add support for PAI Extension 1 NNPA counters
s390/mm: fix no previous prototype warnings in maccess.c
s390/mm: uninline copy_oldmem_kernel() function
s390/mm,ptdump: add real memory copy page markers
s390/mm: rework memcpy_real() to avoid DAT-off mode
s390/dump: save IPL CPU registers once DAT is available
s390/pci: convert high_memory to physical address
s390/smp,ptdump: add absolute lowcore markers
s390/smp: rework absolute lowcore access
s390/smp: call smp_reinit_ipl_cpu() before scheduler is available
s390/ptdump: add missing amode31 markers
s390/mm: split lowcore pages with set_memory_4k()
s390/mm: remove unused access parameter from do_fault_error()
s390/delay: sync comment within __delay() with reality
s390: move from strlcpy with unused retval to strscpy
|
|
As far as I can tell there is no need for the staged setup in
dasd, so allocate the tagset and the disk with the queue in
dasd_gendisk_alloc.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20220928143945.1687114-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a function to check if a device is accessible.
This makes mostly sense for copy pair secondary devices but it will work
for all devices.
The sysfs attribute ping is a write only attribute and will issue a NOP
CCW to the device.
In case of success it will return zero. If the device is not accessible
it will return an error code.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220920192616.808070-8-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In case of errors or misbehaviour of the primary device a controlled
failover to one of the configured secondary devices needs to be
performed.
The swap processing stops I/O on the primary device, all requests are
re-queued to the blocklayer queue, the entries in the copy relation are
swapped and finally the link to the blockdevice is moved from primary to
secondary dasd device.
After this, the secondary becomes the new primary device and I/O is
restarted on that device.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220920192616.808070-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A copy relation that is configured on the storage server side needs to be
enabled separately in the device driver. A sysfs interface is created
that allows userspace tooling to control such setup.
The following sysfs entries are added to store and read copy relation
information:
copy_pair
- Add/Delete a copy pair relation to the DASD device driver
- Query all previously added copy pair relations
copy_role
- Query the copy pair role of the device
To add a copy pair to the DASD device driver it has to be specified
through the sysfs attribute copy_pair. Only one secondary device can be
specified at a time together with the primary device. Both, secondary
and primary can be used equally to define the copy pair.
The secondary devices have to be offline when adding the copy relation.
The primary device needs to be specified first followed by the comma
separated secondary device.
Read from the copy_pair attribute to get the current setup and write
"clear" to the attribute to delete any existing setup.
Example:
$ echo 0.0.9700,0.0.9740 > /sys/bus/ccw/devices/0.0.9700/copy_pair
$ cat /sys/bus/ccw/devices/0.0.9700/copy_pair
0.0.9700,0.0.9740
During device online processing the required data will be read from the
storage server and the information will be compared to the setup
requested through the copy_pair attribute. The registration of the
primary and secondary device will be handled accordingly.
A blockdevice is only allocated for copy relation primary devices.
To query the copy role of a device read from the copy_role sysfs
attribute. Possible values are primary, secondary, and none.
Example:
$ cat /sys/bus/ccw/devices/0.0.9700/copy_role
primary
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220920192616.808070-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Benjamin Block <bblock@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20220818205948.6360-1-wsa+renesas@sang-engineering.com
Link: https://lore.kernel.org/r/20220818210102.7301-1-wsa+renesas@sang-engineering.com
[gor@linux.ibm.com: squashed two changes linked above together]
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the s390 dasd sysfs code to use default_groups field
which has been the preferred way since commit aa30f47cf666 ("kobject:
Add support for default attribute groups to kobj_type") so that we can
soon get rid of the obsolete default_attrs field.
Cc: Stefan Haberland <sth@linux.ibm.com>
Cc: Jan Hoeppner <hoeppner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220106095401.3274637-1-gregkh@linuxfoundation.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
show() must not use snprintf() when formatting the value to be
returned to user space.
Fix the coccicheck warnings:
WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/1634280655-4908-1-git-send-email-wangqing@vivo.com
[hca@linux.ibm.com: fix indentation]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Wire up device_driver->dev_groups, so that really_probe() creates the
sysfs attributes for us automatically.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20210316094513.2601218-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Our intention was to only remove path kobjects whenever a device is
being set offline. However, one corner case was missing.
If a device is disabled and enabled (using the IOCTLs BIODASDDISABLE and
BIODASDENABLE respectively), the enabling process will call
dasd_eckd_reload_device() which itself calls dasd_eckd_read_conf() in
order to update path information. During that update,
dasd_eckd_clear_conf_data() clears all old data and also removes all
kobjects. This will leave us with an inconsistent state of path kobjects
and a subsequent path verification leads to a failing kobject creation.
Fix this by removing kobjects only in the context of offlining a device
as initially intended.
Fixes: 19508b204740 ("s390/dasd: Display FC Endpoint Security information via sysfs")
Reported-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new sysfs attribute (fc_security) per device and per operational
channel path. The information of the current FC Endpoint Security state
is received through the CIO layer.
The state of the FC Endpoint Security can be either "Unsupported",
"Authentication", or "Encryption".
For example:
$ cat /sys/bus/ccw/devices/0.0.c600/fc_security
Encryption
If any of the operational paths is in a state different from all
others, the device sysfs attribute will display the additional state
"Inconsistent".
The sysfs attributes per paths are organised in a new directory called
"paths_info" with subdirectories for each path.
/sys/bus/ccw/devices/0.0.c600/paths_info/
├── 0.38
│ └── fc_security
├── 0.39
│ └── fc_security
├── 0.3a
│ └── fc_security
└── 0.3b
└── fc_security
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In order to work with Extent Space Efficient (ESE) volumes, certain
viable information about those volumes and the corresponding extent
pool (such as extent size, configured space, allocated space, etc.) can
be provided.
Use the CCW commands Volume Storage Query and Logical Configuration
Query to receive detailed information about ESE volumes and the extent
pool respectively. These information are made accessible via internal
functions for subsequent users, and via sysfs attributes for userpsace
usage.
The new sysfs attributes reside in separate directories called capacity
and extent_pool.
attributes:
ese:
0/1 depending on whether the volume is an ESE volume
Capacity related attributes:
space_allocated:
Space currently allocated by the volume (in cyl)
space_configured:
Remaining space in the extent pool (in cyl)
logical_capacity:
The entire addressable space for this volume (in cyl)
Extent Pool related attributes:
pool_id:
ID of the extent pool the volume in question resides in
pool_oos:
Extent pool is out-of-space
extent_size:
Size of a single extent in this pool
cap_at_warnlevel
Extent pool capacity at warn level
warn_threshold:
Threshold at which percentage of remaining extent pool space a
warning message is issued
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The "len" variable is the length of the option up to the next option or
to the end of the string which ever first. We want to print the invalid
option so we want precision "%.*s" but the format is width "%*s" so it
prints up to the end of the string.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
ccw "busid" should always be NUL-terminated, as evident from e.g.
get_ccwdev_by_busid doing "return (strcmp(bus_id, dev_name(dev)) == 0)".
Replace all strncpy initializing busid with strlcpy. This fixes the
following gcc 8 warnings:
drivers/s390/scsi/zfcp_aux.c:104:2: warning: 'strncpy' specified bound 20
equals destination size [-Wstringop-truncation]
strncpy(busid, token, ZFCP_BUS_ID_SIZE);
drivers/s390/block/dasd_eer.c:316:2: warning: 'strncpy' specified bound 10
equals destination size [-Wstringop-truncation]
strncpy(header.busid, dev_name(&device->cdev->dev), DASD_EER_BUSID_SIZE);
drivers/s390/block/dasd_eer.c:359:2: warning: 'strncpy' specified bound 10
equals destination size [-Wstringop-truncation]
strncpy(header.busid, dev_name(&device->cdev->dev), DASD_EER_BUSID_SIZE);
drivers/s390/block/dasd_devmap.c:429:3: warning: 'strncpy' specified bound
20 equals destination size [-Wstringop-truncation]
strncpy(new->bus_id, bus_id, DASD_BUS_ID_SIZE);
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Acked-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Make the behavior in case of constant IFCC/CCC errors configurable.
Add a sysfs attribute to switch between path disabled after threshold
exceeded (default) and message only.
Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/s390/block/ files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Stefan Haberland <sth@linux.vnet.ibm.com>
Cc: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Use new blk-mq interfaces. Use multiple queues and also use the block
layer complete helper that finish the IO on the CPU that initiated it.
Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The z/VM hypervisor provides virtual disks (VDISK) which are backed by
main memory of the hypervisor. Those devices are seen as DASD FBA disks
within the Linux guest.
Whenever data is written to such a device, memory is allocated
on-the-fly by z/VM accordingly. This memory, however, is not being freed
if data on the device is deleted by the guest OS.
In order to make memory usable after deletion again, add discard support
to the FBA discipline.
While at it, update comments regarding the DASD_FEATURE_* flags.
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
attribute_group are not supposed to change at runtime. All functions
working with attribute_group provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Fix these set but not used warnings:
drivers/s390/block/dasd.c:3933:6: warning: variable 'rc' set but not used [-Wunused-but-set-variable]
drivers/s390/block/dasd_alias.c:757:6: warning: variable 'rc' set but not used [-Wunused-but-set-variable]
In addition to that remove the test if an unsigned is < 0:
drivers/s390/block/dasd_devmap.c:153:11: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
If a device is offline it can still be set to read-only via the bus id
through sysfs. Only the read-only feature flag for the ccw_device is
then set. If the device is online the corresponding block device needs
to be set to read-only as well (via set_disk_ro()).
The check whether there is a device to do so, however, happens after the
feature flag was set. This leads to an unnecessary "no such device"
error in the offline case.
This bug was introduced by commit 7571cb1c8e3cc ("s390/dasd: Make use of
dasd_set_feature() more often"). Fix this by simply returning count if
no device is available.
Fixes: 7571cb1c8e3cc ("s390/dasd: Make use of dasd_set_feature() more often")
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The safe offline processing needs, as well as the normal offline
processing, to be locked against multiple parallel executions. But it
should be able to be overtaken by a normal offline processing to make sure
that the device does not wait forever for outstanding I/O if the user
wants to.
Unfortunately the parallel processing of safe offline and normal offline
might lead to a race situation where both threads report successful
execution to the CIO layer which in turn tries to deregister the kobject
of the device twice. This leads to a
refcount_t: underflow; use-after-free.
error and the device is not able to be set online again afterwards without
a reboot.
Correct the locking of the safe offline processing by doing the following:
- Use the cdev lock to secure all set and test operations to the
device flags.
- Two safe offline processes are locked against each other using
the DASD_FLAG_SAFE_OFFLINE and DASD_FLAG_SAFE_OFFLINE_RUNNING
device flags.
The differentiation between offline triggered and offline running
is needed since the normal offline attribute is owned by CIO and
we have to pass over control in between.
- The dasd_generic_set_offline process handles the offline
processing. It is locked against parallel execution using the
DASD_FLAG_OFFLINE.
- Only a running safe offline should be able to be overtaken by a
single normal offline. This is ensured by clearing the
DASD_FLAG_SAFE_OFFLINE_RUNNING flag when a normal offline
overtakes. So this can only happen ones.
- The safe offline just aborts in this case doing nothing and
the normal offline processing finishes as usual.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
We have two flags, DASD_FLAG_DEVICE_RO and DASD_FEATURE_READONLY, that
tell us whether a device is read-only. DASD_FLAG_DEVICE_RO is set when a
device is attached as read-only to z/VM and DASD_FEATURE_READONLY is set
when either the corresponding kernel parameter is configured, or the
read-only state is changed via sysfs.
This is valuable information in any case. However, only the feature flag
is being checked at the moment when we display the current state.
Fix this by checking both flags.
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Dynamic stack allocations are considered bad. Get rid of this one
occurrence and use kstrdup() instead.
Also, set the return codes so that we have only one exit where we can
call kfree().
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Allow 0 as valid input for the path_threshold attribute to deactivate
the IFCC/CCC error handling.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The function dasd_busid() still uses simple_strtoul() to convert a
string to an integer value. This function is obsolete for quite some
time already and should be replaced.
The whole parameter parsing semantic still relies somewhat on the fact,
that simple_strtoul() parses a string containing literals without
complains and just returns the parsed integer value plus the residual
string. kstrtoint(), however, would return -EINVAL in such a case.
Since we want to get rid of simple_strtoul() and now have a nice dasd[]
containing only single elements, we can clean up and simplify a few
things.
Replace simple_strtoul() with kstrtouint(), improve and simplify the
overall parameter parsing by the following:
- instead of residual strings return proper error codes
- remove dasd_parse_next_element() and decide directly what sort of
element is being parsed
- if we parse a device or a range of devices, split that element into
separate bits with a new function
- remove warning about invalid ending as it doesn't apply anymore
- annotate all parsing functions and data that can be freed after
initialisation with __init and __initdata respectively
- clean up bits and pieces while at it
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
When the DASD driver is built into the kernel, the entire comma
separated parameter list is stored as one single element in the dasd[]
array, opposed to the module build where each element is stored
separately in dasd[].
There is no point in doing so. Therefore, store each part of the list as
single elements in dasd[] as well when built into the kernel.
Also, create a define for the maximum of 256 parameters.
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With this feature, the DASD device driver more robustly handles DASDs
that are attached via multiple channel paths and are subject to
constant Interface-Control-Checks (IFCCs) and Channel-Control-Checks
(CCCs) or loss of High-Performance-FICON (HPF) functionality on one or
more of these paths.
If a channel path does not work correctly, it is removed from normal
operation as long as other channel paths are available. All extended
error recovery states can be queried and reset via user space
interfaces.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Store flags and path_data per channel path.
Implement get/set functions for various path masks.
The patch does not add functional changes.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The function dasd_ro_store() calls set_disk_ro() to set the device in
question read-only. Since set_disk_ro() might sleep, we can't call it
while holding a lock. However, we also can't simply check if the device,
block, and gdp references are valid before we call set_disk_ro() because
an offline processing might have been started in the meanwhile which
will destroy those references.
In order to reliably call set_disk_ro() we have to ensure several
things:
- Still check validity of the mentioned references but additionally
check if offline processing is running and bail out accordingly. Also,
do this while holding the device lock.
- To ensure that the block device is still safe after the lock, increase
the open_count while still holding the device lock.
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The reference to a device in question may get lost when the extended
error reporting (EER) attribute is being enabled/disabled while the
device is set offline at the same time. This is due to missing
refcounting and incorrect locking. Fix this by the following:
- In dasd_eer_store() get the device directly and handle the refcount
accordingly.
- Move the lock in dasd_eer_enable() up so we can ensure safe
processing.
- Check if the device is being set offline and return with -EBUSY if so.
- While at it, change the return code from -EPERM to -EMEDIUMTYPE as
suggested by a FIXME, since that is what we're actually checking.
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
When setting certain attributes, we actually set the according feature
flag. Do this by using dasd_set_feature() at a few occurrences and
remove duplicate code.
In dasd_set_feature() dasd_find_busid() is used to retrieve the devmap
for the device in question. Combined with the change above, this would
require the device to be set online at least once so that a devmap is
being created. Change that by using dasd_devmap_from_cdev() instead,
which uses dasd_find_busid() first and will create a devmap accordingly
if there is none yet.
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
simple_strtoul() has been marked obsolete for quite some time now.
Replace a few last occurrences with kstrtouint().
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
A DASD device consists of the device itself and a discipline with a
corresponding private structure. These fields are set up during online
processing right after the device is created and before it is processed by
the state machine and made available for I/O.
During offline processing the discipline pointer and the private data gets
freed within the state machine and without protection of the existing
reference count. This might lead to a kernel panic because a function might
have taken a device reference and accesses the discipline pointer and/or
private data of the device while this is already freed.
Fix by freeing the discipline pointer and the private data after ensuring
that there is no reference to the device left.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
With this feature, applications can query if a DASD volume is online
to another operating system instances by checking the online status of
all attached hosts from the storage server.
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Convert the uses of pr_warning to pr_warn so there are fewer
uses of the old pr_warning.
Miscellanea:
o Align arguments
o Coalesce formats
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Add support for Control Unit Initiated Reconfiguration (CUIR) to
Linux, a storage server interface to reconcile concurrent hardware
changes between storage and host.
Reviewed-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Change the visibility of the dasd parameter of kernel module dasd_mod
to be consistent with the eer_pages parameter.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Acked-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
This patch adds a 'timeout' attibute to the DASD driver.
When set to non-zero, the blk_timeout function will
be enabled with the timeout specified in the attribute.
Setting 'timeout' to '0' will disable block timeouts.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Instead of having the number of retries hard-coded in the various
functions we should be using a default retry value, which can
be modified via sysfs.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
remove cast for kzalloc return value.
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 update from Martin Schwidefsky:
"Add support to generate code for the latest machine zEC12, MOD and XOR
instruction support for the BPF jit compiler, the dasd safe offline
feature and the big one: the s390 architecture gets PCI support!!
Right before the world ends on the 21st ;-)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390/qdio: rename the misleading PCI flag of qdio devices
s390/pci: remove obsolete email addresses
s390/pci: speed up __iowrite64_copy by using pci store block insn
s390/pci: enable NEED_DMA_MAP_STATE
s390/pci: no msleep in potential IRQ context
s390/pci: fix potential NULL pointer dereference in dma_free_seg_table()
s390/pci: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
s390/bpf,jit: add support for XOR instruction
s390/bpf,jit: add support MOD instruction
s390/cio: fix pgid reserved check
vga: compile fix, disable vga for s390
s390/pci: add PCI Kconfig options
s390/pci: s390 specific PCI sysfs attributes
s390/pci: PCI hotplug support via SCLP
s390/pci: CHSC PCI support for error and availability events
s390/pci: DMA support
s390/pci: PCI adapter interrupts for MSI/MSI-X
s390/bitops: find leftmost bit instruction support
s390/pci: CLP interface
s390/pci: base support
...
|
|
The regular behavior of the DASD device driver when setting a device
offline is to return all outstanding I/O as failed. This behavior is
different from that of other System z operating systems and may lead
to unexpected data loss. Adding an explicit 'safe' offline function
will allow customers to use DASDs in the way they expect them to work.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
"Whether" is misspelled in various comments across the tree; this
fixes them. No code changes.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Remove the file name from the comment at top of many files. In most
cases the file name was wrong anyway, so it's rather pointless.
Also unify the IBM copyright statement. We did have a lot of sightly
different statements and wanted to change them one after another
whenever a file gets touched. However that never happened. Instead
people start to take the old/"wrong" statements to use as a template
for new files.
So unify all of them in one go.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
The dasd_open function uses the private_data pointer of the gendisk to
find the dasd_block structure that matches the gendisk. When a DASD
device is set offline, we set the private_data pointer of the gendisk
to NULL and later remove the dasd_block structure, but there is still
a small race window, in which dasd_open could first read a pointer
from the private_data field and then try to use it, after the structure
has already been freed.
To close this race window, we will store a pointer to the dasd_devmap
structure of the base device in the private_data field. The devmap
entries are not deleted, and we already have proper locking and
reference counting in place, so that we can safely get from a devmap
pointer to the dasd_device and dasd_block structures of the device.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
|
Normal I/O operations through the DASD device driver give only access
to the data fields of an ECKD device even for track based I/O.
This patch extends the DASD device driver to give access to whole
ECKD tracks including count, key and data fields.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
If a DASD device has been reserved by a Linux system, and later
this reservation is ‘stolen’ by a second system by means of an
unconditional reserve, then the first system receives a
notification about this fact. With this patch such an event can
be either ignored, as before, or it can be used to let the device
fail all I/O request, so that the device will not block anymore.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
When a new path is added at runtime, the CIO layer will call the drivers
path_event callback. The DASD device driver uses this callback to trigger
a path verification for the new path. The driver will use only those
paths for I/O, which have been successfully verified.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
This feature provides a user interface to specify the timeout for
missing interrupts for standard I/O operations.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The dasd_alias_show function does not return a device reference
in case the device is an alias.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Remove the duplicate of the DASD uid from the devmap structure.
Use the uid from the device private structure instead.
This also removes a lockdep warning complaining about a possible
SOFTIRQ-safe -> SOFTIRQ-unsafe lock order.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
|
In z/VM it is possible to attach a device as read-only. To prevent
unintentional write requests and subsequent I/O errors, we can detect
this configuration using the z/VM DIAG 210 interface and set the
respective linux block device to read-only as well.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The function dasd_device_from_cdev returns a reference to the dasd
device and increases the refcount by one. If an exception occurs,
the refcount was not decreased in all cases
e.g. in dasd_discipline_show.
Prevent the offline processing from hang by correcting two functions
to decrease the refcount even if an error occured.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Introduce the power management callbacks to the dasd driver. On suspend
the dasd devices are stopped and removed from the focus of alias
management.
On resume they are reinitialized by rereading the device characteristics
and adding the device to the alias management.
In case the device has gone away during suspend it will caught in the
suspend state with stopped flag set to UNRESUMED. After it appears again
the restore function is called again.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Moved some Messages into s390 debug feature and changed remaining
messages to use the dev_xxx and pr_xxx macros.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
To support High Performance FICON, the DASD device driver has to
translate I/O requests into the new transport mode control words (TCW)
instead of the traditional (command mode) CCW requests.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
bus_id usage crept in again; fix it.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
When the connection between host and storage server is lost, the
dasd device driver usually blocks all I/O on affected devices and
waits for them to reappear. In some setups however it would be
better if the I/O is returned as error so that device can be
recovered by some other means, eg. in a raid or multipath setup.
Signed-off-by: Holger Smolinski <Holger.Smolinski@de.ibm.com>
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
bus_id -> dev_name() conversions in s390 code.
[cornelia.huck@de.ibm.com: minor adaptions]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
When z/VM provides two virtual devices (minidisks) that reside on the
same real device, both will receive the configuration data from the
real device and thus get the same uid. To fix this problem, z/VM
provides an additional configuration data record that allows to
distinguish between minidisks.
z/VM APAR VM64273 needs be installed so this fix has an effect.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
We should use 'const char *' in the busid functions since the
strings are not modified anyway.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Parallel access volumes (PAV) is a storage server feature, that allows
to start multiple channel programs on the same DASD in parallel. It
defines alias devices which can be used as alternative paths to the
same disk. With the old base PAV support we only needed rudimentary
functionality in the DASD device driver. As the mapping between base
and alias devices was static, we just had to export an identifier
(uid) and could leave the combining of devices to external layers
like a device mapper multipath.
Now hyper PAV removes the requirement to dedicate alias devices to
specific base devices. Instead each alias devices can be combined with
multiple base device on a per request basis. This requires full
support by the DASD device driver as now each channel program itself
has to identify the target base device.
The changes to the dasd device driver and the ECKD discipline are:
- Separate subchannel device representation (dasd_device) from block
device representation (dasd_block). Only base devices are block
devices.
- Gather information about base and alias devices and possible
combinations.
- For each request decide which dasd_device should be used (base or
alias) and build specific channel program.
- Support summary unit checks, which allow the storage server to
upgrade / downgrade between base and hyper PAV at runtime (support
is mandatory).
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Slab destructors were no longer supported after Christoph's
c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been
BUGs for both slab and slub, and slob never supported them
either.
This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
Specifying 'ipldev' in the dasd= kernel parameter will automatically
activate the boot device for use by the dasd driver.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
This patch adds a sysfs-attribute 'status' to make the DASD device-status
accessible from user-space. In addition, the DASD driver generates an
uevent(CHANGE) for the ccw-device on each device-status change.
This enables user-space applications (e.g. udev) to do related processing.
Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
It is now possible to enable/disable ERP related logging without re-compile
and re-ipl. A additional sysfs-attribute 'erplog' allows to switch the
logging non-interruptive.
Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Replace all uses of kmem_cache_t with struct kmem_cache.
The patch was generated using the following script:
#!/bin/sh
#
# Replace one string by another in all the kernel sources.
#
set -e
for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
quilt add $file
sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
mv /tmp/$$ $file
quilt refresh
done
The script was run like this
sh replace kmem_cache_t "struct kmem_cache"
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Currently the return value of 'dasd_eer_enable' is returned - even if the
function returned '0'. Now return 'count' for successful execution.
Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
When writing to dasd attributes (e.g. readonly), all values besides '1'
are handled like '0'.
Other sysfs-attributes like 'online' are checking for '1' and for '0'
and do not accept other values. Therefore enhanced checking and error
handling in dasd_devmap attribute store functions.
Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Specifying kernel parameter "dasd=nopav" on systems running under VM
has no function but results in message "disable PAV mode". Correct
message is "'nopav' not supported on VM".
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The dasd_device_from_cdev function is called from interrupt context
to get the struct dasd_device associated with a ccw device. The
driver_data of the ccw device points to the dasd_devmap structure
which contains the pointer to the dasd_device structure. The lock
that protects the dasd_devmap structure is acquire with out irqsave.
To prevent the deadlock in dasd_device_from_cdev if it is called
from interrupt context the dependency to the dasd_devmap structure
needs to be removed. Let the driver_data of the ccw device point
to the dasd_device structure directly and use the ccw device lock
to protect the access.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The subsystem check in the PAV code is incorrect, it enables PAV
per device instead of per subsystem.
Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
In some situations PAV alias devices on LPAR are not accessible.
The initialization procedure required to enable access to PAV alias
devices has to be performed per storage server subsystem and not
only once per storage server.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The dasd_page_cache should return page addresses and therefore the
cache must be created with an alignment of PAGE_SIZE.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The dasd function dasd_set_uid calls kzalloc while holding the
dasd_devmap_lock. Rearrange the code to do the memory allocation
outside the lock.
Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Add support for parallel-access-volumes to the dasd driver. This
allows concurrent access to dasd devices with multiple channel
programs.
Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Dasd code cleanup: 1) remove white space, 2) remove the emacs override
sections, and 3) use kzalloc instead of kmalloc.
Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Generate new sysfs-attribute 'uid' that contains an device specific unique
identifier. This can be used to identity multiple ALIASES of the same
physical device (PAV). In addition the sysfs-attributes 'vendor' (containing
the manufacturer of the device) and 'alias' (identify alias or base device) is
added. This is first part of PAV support in LPAR (also valid on zVM).
Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
MODULE_PARM was actually breaking: recent gcc version optimize them out as
unused. It's time to replace the last users, which are generally in the
most unloved drivers anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The DASD extended error reporting is a facility that allows to get detailed
information about certain problems in the DASD I/O. This information can be
used to implement fail-over applications that can recover these problems.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
- Remove all CVS generated information like e.g. revision IDs from
drivers/s390 and include/asm-s390 (none present in arch/s390).
- Add newline at end of arch/s390/lib/Makefile to avoid diff message.
Acked-by: Andreas Herrmann <aherrman@de.ibm.com>
Acked-by: Frank Pavlic <pavlic@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This is the drivers/s390/ part of the big kfree cleanup patch.
Remove pointless checks for NULL prior to calling kfree() in drivers/s390/.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Cornelia Huck <cohuck@de.ibm.com>
Acked-by: Stefan Bader <Stefan.Bader@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Reintroduce a read-only copy of the devmap features in the device struct.
This is necessary to solve a deadlock on the dasd_devmap_lock which is
acquired by dasd_get_features called from the dasd tasklet. The current
implementation of devmap doesn't allow to call any devmap function from
interrupt or softirq context.
Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
drivers/s390/block/dcssblk.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The independent read-only flags in devmap, dasd_device and gendisk are not
kept in sync. Use one bit per feature in the dasd driver and keep that bit in
sync with the gendisk bit.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
|