| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two more fixes, both have some visible effects on user space:
- add check if quotas are enabled when passing qgroup inheritance
info, this affects snapper that could fail to create a snapshot
- do check for leaf/node flag WRITTEN earlier so that nodes are
completely validated before access, this used to be done by
integrity checker but it's been removed and left an unhandled case"
* tag 'for-6.9-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: make sure that WRITTEN is set on all metadata blocks
btrfs: qgroup: do not check qgroup inherit if qgroup is disabled
|
|
This reverts commit 07ed11afb68d94eadd4ffc082b97c2331307c5ea.
Stephen Rostedt reports:
"I went to run my tests on my VMs and the tests hung on boot up.
Unfortunately, the most I ever got out was:
[ 93.607888] Testing event system initcall: OK
[ 93.667730] Running tests on all trace events:
[ 93.669757] Testing all events: OK
[ 95.631064] ------------[ cut here ]------------
Timed out after 60 seconds"
and further debugging points to a possible circular locking dependency
between the console_owner locking and the worker pool locking.
Reverting the commit allows Steve's VM to boot to completion again.
[ This may obviously result in the "[TTM] Buffer eviction failed"
messages again, which was the reason for that original revert. But at
this point this seems preferable to a non-booting system... ]
Reported-and-bisected-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/all/20240502081641.457aa25f@gandalf.local.home/
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Alex Constantino <dreaming.about.electric.sheep@gmail.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Timo Lindfors <timo.lindfors@iki.fi>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Fix for cleanup infrastructure (Dan Carpenter)
This makes the __free(kfree) cleanup hooks not crash on error
pointers.
- SLUB fix for freepointer checking (Nicolas Bouchinet)
This fixes a recently introduced bug that manifests when
init_on_free, CONFIG_SLAB_FREELIST_HARDENED and consistency checks
(slub_debug=F) are all enabled, and results in false-positive
freepointer corrupt reports for caches that store freepointer outside
of the object area.
* tag 'slab-for-6.9-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: make __free(kfree) accept error pointers
mm/slub: avoid zeroing outside-object freepointer for single free
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay
Pull auxdisplay fixes from Andy Shevchenko:
- A couple of non-critical build fixes to Character LCD library
- Miscellaneous fixes here and there
* tag 'auxdisplay-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay:
auxdisplay: charlcd: Don't rebuild when CONFIG_PANEL_BOOT_MESSAGE=y
auxdisplay: charlcd: Add missing MODULE_DESCRIPTION()
auxdisplay: seg-led-gpio: Convert to platform remove callback returning void
auxdisplay: linedisp: Group display drivers together
|
|
|
|
epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep->mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.
Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.
Link: https://lore.kernel.org/lkml/0000000000002d631f0615918f1e@google.com/
Reported-by: syzbot+045b454ab35fd82a35fb@syzkaller.appspotmail.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix error logging and check user-supplied data when injecting an
error in the versal EDAC driver
* tag 'edac_urgent_for_v6.9_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versal: Do not log total error counts
EDAC/versal: Check user-supplied data before injecting an error
EDAC/versal: Do not register for NOC errors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix incorrect delay handling in the plpks (keystore) code
- Fix a panic when an LPAR boots with a frozen PE
Thanks to Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, and Nayna
Jain.
* tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: LPAR panics during boot up with a frozen PE
powerpc/pseries: make max polling consistent for longer H_CALLs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Remove the broken vsyscall emulation code from
the page fault code
- Fix kexec crash triggered by certain SEV RMP
table layouts
- Fix unchecked MSR access error when disabling
the x2APIC via iommu=off
* tag 'x86-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove broken vsyscall emulation code from the page fault code
x86/apic: Don't access the APIC when disabling x2APIC
x86/sev: Add callback to apply RMP table fixups for kexec
x86/e820: Add a new e820 table update helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix suspicious RCU usage in __do_softirq()"
* tag 'irq-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
softirq: Fix suspicious RCU usage in __do_softirq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes and new device ids
for 6.9-rc7 that resolve some reported problems.
Included in here are:
- iio driver fixes
- mei driver fix and new device ids
- dyndbg bugfix
- pvpanic-pci driver bugfix
- slimbus driver bugfix
- fpga new device id
All have been in linux-next with no reported problems"
* tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
slimbus: qcom-ngd-ctrl: Add timeout for wait operation
dyndbg: fix old BUG_ON in >control parser
misc/pvpanic-pci: register attributes via pci_driver
fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card
mei: me: add lunar lake point M DID
mei: pxp: match against PCI_CLASS_DISPLAY_OTHER
iio:imu: adis16475: Fix sync mode setting
iio: accel: mxc4005: Reset chip on probe() and resume()
iio: accel: mxc4005: Interrupt handling fixes
dt-bindings: iio: health: maxim,max30102: fix compatible check
iio: pressure: Fixes SPI support for BMP3xx devices
iio: pressure: Fixes BME280 SPI driver data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for reported problems for
6.9-rc7. Included in here are:
- usb core fixes for found issues
- typec driver fixes for reported problems
- usb gadget driver fixes for reported problems
- xhci build fixes
- dwc3 driver fixes for reported issues
All of these have been in linux-next this past week with no reported
problems"
* tag 'usb-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: Check for port partner validity before consuming it
usb: typec: tcpm: enforce ready state when queueing alt mode vdm
usb: typec: tcpm: unregister existing source caps before re-registration
usb: typec: tcpm: clear pd_event queue in PORT_RESET
usb: typec: tcpm: queue correct sop type in tcpm_queue_vdm_unlocked
usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device
usb: ohci: Prevent missed ohci interrupts
usb: typec: qcom-pmic: fix pdphy start() error handling
usb: typec: qcom-pmic: fix use-after-free on late probe errors
usb: gadget: f_fs: Fix a race condition when processing setup packets.
USB: core: Fix access violation during port device removal
usb: dwc3: core: Prevent phy suspend during init
usb: xhci-plat: Don't include xhci.h
usb: gadget: uvc: use correct buffer size when parsing configfs lists
usb: gadget: composite: fix OS descriptors w_value logic
usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a new ID for ASUS ROG RAIKIRI controllers added to xpad driver
- amimouse driver structure annotated with __refdata to prevent section
mismatch warnings.
* tag 'input-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: amimouse - mark driver struct with __refdata to prevent section mismatch
Input: xpad - add support for ASUS ROG RAIKIRI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- probe-events: Fix memory leak in parsing probe argument.
There is a memory leak (forget to free an allocated buffer) in a
memory allocation failure path. Fix it to jump to the correct error
handling code.
* tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix memory leak in traceprobe_parse_probe_arg_body()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing and tracefs fixes from Steven Rostedt:
- Fix RCU callback of freeing an eventfs_inode.
The freeing of the eventfs_inode from the kref going to zero freed
the contents of the eventfs_inode and then used kfree_rcu() to free
the inode itself. But the contents should also be protected by RCU.
Switch to a call_rcu() that calls a function to free all of the
eventfs_inode after the RCU synchronization.
- The tracing subsystem maps its own descriptor to a file represented
by eventfs. The freeing of this descriptor needs to know when the
last reference of an eventfs_inode is released, but currently there
is no interface for that.
Add a "release" callback to the eventfs_inode entry array that allows
for freeing of data that can be referenced by the eventfs_inode being
opened. Then increment the ref counter for this descriptor when the
eventfs_inode file is created, and decrement/free it when the last
reference to the eventfs_inode is released and the file is removed.
This prevents races between freeing the descriptor and the opening of
the eventfs file.
- Fix the permission processing of eventfs.
The change to make the permissions of eventfs default to the mount
point but keep track of when changes were made had a side effect that
could cause security concerns. When the tracefs is remounted with a
given gid or uid, all the files within it should inherit that gid or
uid. But if the admin had changed the permission of some file within
the tracefs file system, it would not get updated by the remount.
This caused the kselftest of file permissions to fail the second time
it is run. The first time, all changes would look fine, but the
second time, because the changes were "saved", the remount did not
reset them.
Create a link list of all existing tracefs inodes, and clear the
saved flags on them on a remount if the remount changes the
corresponding gid or uid fields.
This also simplifies the code by removing the distinction between the
toplevel eventfs and an instance eventfs. They should both act the
same. They were different because of a misconception due to the
remount not resetting the flags. Now that remount resets all the
files and directories to default to the root node if a uid/gid is
specified, it makes the logic simpler to implement.
* tag 'trace-v6.9-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Have "events" directory get permissions from its parent
eventfs: Do not treat events directory different than other directories
eventfs: Do not differentiate the toplevel events directory
tracefs: Still use mount point as default permissions for instances
tracefs: Reset permissions on remount if permissions are options
eventfs: Free all of the eventfs_inode after RCU
eventfs/tracing: Add callback for release of an eventfs_inode
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- fix the combination of restricted pools and dynamic swiotlb
(Will Deacon)
* tag 'dma-mapping-6.9-2024-05-04' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: initialise restricted pool list_head when SWIOTLB_DYNAMIC=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes:
- Avoid a deadlock in the Qualcomm clk driver by making the regulator
which supplies the GDSC optional
- Restore RPM clks on Qualcomm msm8976 by setting num_clks
- Fix Allwinner H6 CPU rate changing logic to avoid system crashes by
temporarily reparenting the CPU clk to something that isn't being
changed
- Set a MIPI PLL min/max rate on Allwinner A64 to fix blank screens
on some devices
- Revert back to of_match_device() in the Samsung clkout driver to
get the match data based on the parent device's compatible string"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: Revert "clk: Use device_get_match_data()"
clk: sunxi-ng: a64: Set minimum and maximum rate for PLL-MIPI
clk: sunxi-ng: common: Support minimum and maximum rate
clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change
clk: qcom: smd-rpm: Restore msm8976 num_clk
clk: qcom: gdsc: treat optional supplies as optional
|
|
The events directory gets its permissions from the root inode. But this
can cause an inconsistency if the instances directory changes its
permissions, as the permissions of the created directories under it should
inherit the permissions of the instances directory when directories under
it are created.
Currently the behavior is:
# cd /sys/kernel/tracing
# chgrp 1002 instances
# mkdir instances/foo
# ls -l instances/foo
[..]
-r--r----- 1 root lkp 0 May 1 18:55 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 18:55 current_tracer
-rw-r----- 1 root lkp 0 May 1 18:55 error_log
drwxr-xr-x 1 root root 0 May 1 18:55 events
--w------- 1 root lkp 0 May 1 18:55 free_buffer
drwxr-x--- 2 root lkp 0 May 1 18:55 options
drwxr-x--- 10 root lkp 0 May 1 18:55 per_cpu
-rw-r----- 1 root lkp 0 May 1 18:55 set_event
All the files and directories under "foo" has the "lkp" group except the
"events" directory. That's because its getting its default value from the
mount point instead of its parent.
Have the "events" directory make its default value based on its parent's
permissions. That now gives:
# ls -l instances/foo
[..]
-rw-r----- 1 root lkp 0 May 1 21:16 buffer_subbuf_size_kb
-r--r----- 1 root lkp 0 May 1 21:16 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:16 current_tracer
-rw-r----- 1 root lkp 0 May 1 21:16 error_log
drwxr-xr-x 1 root lkp 0 May 1 21:16 events
--w------- 1 root lkp 0 May 1 21:16 free_buffer
drwxr-x--- 2 root lkp 0 May 1 21:16 options
drwxr-x--- 10 root lkp 0 May 1 21:16 per_cpu
-rw-r----- 1 root lkp 0 May 1 21:16 set_event
Link: https://lore.kernel.org/linux-trace-kernel/20240502200906.161887248@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Treat the events directory the same as other directories when it comes to
permissions. The events directory was considered different because it's
dentry is persistent, whereas the other directory dentries are created
when accessed. But the way tracefs now does its ownership by using the
root dentry's permissions as the default permissions, the events directory
can get out of sync when a remount is performed setting the group and user
permissions.
Remove the special case for the events directory on setting the
attributes. This allows the updates caused by remount to work properly as
well as simplifies the code.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200906.002923579@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The toplevel events directory is really no different than the events
directory of instances. Having the two be different caused
inconsistencies and made it harder to fix the permissions bugs.
Make all events directories act the same.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.846448710@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If the instances directory's permissions were never change, then have it
and its children use the mount point permissions as the default.
Currently, the permissions of instance directories are determined by the
instance directory's permissions itself. But if the tracefs file system is
remounted and changes the permissions, the instance directory and its
children should use the new permission.
But because both the instance directory and its children use the instance
directory's inode for permissions, it misses the update.
To demonstrate this:
# cd /sys/kernel/tracing/
# mkdir instances/foo
# ls -ld instances/foo
drwxr-x--- 5 root root 0 May 1 19:07 instances/foo
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 18:57 instances
# ls -ld current_tracer
-rw-r----- 1 root root 0 May 1 18:57 current_tracer
# mount -o remount,gid=1002 .
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 18:57 instances
# ls -ld instances/foo/
drwxr-x--- 5 root root 0 May 1 19:07 instances/foo/
# ls -ld current_tracer
-rw-r----- 1 root lkp 0 May 1 18:57 current_tracer
Notice that changing the group id to that of "lkp" did not affect the
instances directory nor its children. It should have been:
# ls -ld current_tracer
-rw-r----- 1 root root 0 May 1 19:19 current_tracer
# ls -ld instances/foo/
drwxr-x--- 5 root root 0 May 1 19:25 instances/foo/
# ls -ld instances
drwxr-x--- 3 root root 0 May 1 19:19 instances
# mount -o remount,gid=1002 .
# ls -ld current_tracer
-rw-r----- 1 root lkp 0 May 1 19:19 current_tracer
# ls -ld instances
drwxr-x--- 3 root lkp 0 May 1 19:19 instances
# ls -ld instances/foo/
drwxr-x--- 5 root lkp 0 May 1 19:25 instances/foo/
Where all files were updated by the remount gid update.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.686838327@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There's an inconsistency with the way permissions are handled in tracefs.
Because the permissions are generated when accessed, they default to the
root inode's permission if they were never set by the user. If the user
sets the permissions, then a flag is set and the permissions are saved via
the inode (for tracefs files) or an internal attribute field (for
eventfs).
But if a remount happens that specify the permissions, all the files that
were not changed by the user gets updated, but the ones that were are not.
If the user were to remount the file system with a given permission, then
all files and directories within that file system should be updated.
This can cause security issues if a file's permission was updated but the
admin forgot about it. They could incorrectly think that remounting with
permissions set would update all files, but miss some.
For example:
# cd /sys/kernel/tracing
# chgrp 1002 current_tracer
# ls -l
[..]
-rw-r----- 1 root root 0 May 1 21:25 buffer_size_kb
-rw-r----- 1 root root 0 May 1 21:25 buffer_subbuf_size_kb
-r--r----- 1 root root 0 May 1 21:25 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:25 current_tracer
-rw-r----- 1 root root 0 May 1 21:25 dynamic_events
-r--r----- 1 root root 0 May 1 21:25 dyn_ftrace_total_info
-r--r----- 1 root root 0 May 1 21:25 enabled_functions
Where current_tracer now has group "lkp".
# mount -o remount,gid=1001 .
# ls -l
-rw-r----- 1 root tracing 0 May 1 21:25 buffer_size_kb
-rw-r----- 1 root tracing 0 May 1 21:25 buffer_subbuf_size_kb
-r--r----- 1 root tracing 0 May 1 21:25 buffer_total_size_kb
-rw-r----- 1 root lkp 0 May 1 21:25 current_tracer
-rw-r----- 1 root tracing 0 May 1 21:25 dynamic_events
-r--r----- 1 root tracing 0 May 1 21:25 dyn_ftrace_total_info
-r--r----- 1 root tracing 0 May 1 21:25 enabled_functions
Everything changed but the "current_tracer".
Add a new link list that keeps track of all the tracefs_inodes which has
the permission flags that tell if the file/dir should use the root inode's
permission or not. Then on remount, clear all the flags so that the
default behavior of using the root inode's permission is done for all
files and directories.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.529542160@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The freeing of eventfs_inode via a kfree_rcu() callback. But the content
of the eventfs_inode was being freed after the last kref. This is
dangerous, as changes are being made that can access the content of an
eventfs_inode from an RCU loop.
Instead of using kfree_rcu() use call_rcu() that calls a function to do
all the freeing of the eventfs_inode after a RCU grace period has expired.
Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.370261163@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 43aa6f97c2d03 ("eventfs: Get rid of dentry pointers without refcounts")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Synthetic events create and destroy tracefs files when they are created
and removed. The tracing subsystem has its own file descriptor
representing the state of the events attached to the tracefs files.
There's a race between the eventfs files and this file descriptor of the
tracing system where the following can cause an issue:
With two scripts 'A' and 'B' doing:
Script 'A':
echo "hello int aaa" > /sys/kernel/tracing/synthetic_events
while :
do
echo 0 > /sys/kernel/tracing/events/synthetic/hello/enable
done
Script 'B':
echo > /sys/kernel/tracing/synthetic_events
Script 'A' creates a synthetic event "hello" and then just writes zero
into its enable file.
Script 'B' removes all synthetic events (including the newly created
"hello" event).
What happens is that the opening of the "enable" file has:
{
struct trace_event_file *file = inode->i_private;
int ret;
ret = tracing_check_open_get_tr(file->tr);
[..]
But deleting the events frees the "file" descriptor, and a "use after
free" happens with the dereference at "file->tr".
The file descriptor does have a reference counter, but there needs to be a
way to decrement it from the eventfs when the eventfs_inode is removed
that represents this file descriptor.
Add an optional "release" callback to the eventfs_entry array structure,
that gets called when the eventfs file is about to be removed. This allows
for the creating on the eventfs file to increment the tracing file
descriptor ref counter. When the eventfs file is deleted, it can call the
release function that will call the put function for the tracing file
descriptor.
This will protect the tracing file from being freed while a eventfs file
that references it is being opened.
Link: https://lore.kernel.org/linux-trace-kernel/20240426073410.17154-1-Tze-nan.Wu@mediatek.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240502090315.448cba46@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: Tze-nan wu <Tze-nan.Wu@mediatek.com>
Tested-by: Tze-nan Wu (吳澤南) <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fix from Dave Jiang:
"Add missing RCH support for endpoint access_coordinate calculation.
A late bug was reported by Robert Richter that the Restricted CXL Host
(RCH) support was missing in the CXL endpoint access_coordinate
calculation.
The missing support causes the topology iterator to stumble over a
NULL pointer and triggers a kernel OOPS on a platform with CXL 1.1
support.
The fix bypasses RCH topology as the access_coordinate calculation is
not necessary since RCH does not support hotplug and the memory region
exported should be covered by the HMAT table already.
A unit test is also added to cxl_test to check against future
regressions on the topology iterator"
* tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Fix cxl_endpoint_get_perf_coordinate() support for RCH
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fixes when running as Xen PV guests for issues introduced in the
6.9 merge window, both related to apic id handling"
* tag 'for-linus-6.9a-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: return a sane initial apic id when running as PV guest
x86/xen/smp_pv: Register the boot CPU APIC properly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"This works around a shortcoming in the memory acceptation API, which
may apparently hog the CPU for long enough to trigger the softlockup
watchdog.
Note that this only affects confidential VMs running under the Intel
TDX hypervisor, which is why I accepted this for now, but this should
obviously be fixed properly in the future"
* tag 'efi-urgent-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: touch soft lockup during memory accept
|
|
Pull block fixes from Jens Axboe:
"Nothing major in here - an nvme pull request with mostly auth/tcp
fixes, and a single fix for ublk not setting segment count and size
limits"
* tag 'block-6.9-20240503' of git://git.kernel.dk/linux:
nvme-tcp: strict pdu pacing to avoid send stalls on TLS
nvmet: fix nvme status code when namespace is disabled
nvmet-tcp: fix possible memory leak when tearing down a controller
nvme: cancel pending I/O if nvme controller is in terminal state
nvmet-auth: replace pr_debug() with pr_err() to report an error.
nvmet-auth: return the error code to the nvmet_auth_host_hash() callers
nvme: find numa distance only if controller has valid numa id
ublk: remove segment count and size limits
nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"As usual in a late stage, we received a fair amount of fixes for ASoC,
and it became bigger than wished. But all fixes are rather device-
specific, and they look pretty safe to apply.
A major par of changes are series of fixes for ASoC meson and SOF
drivers as well as for Realtek and Cirrus codecs. In addition, recent
emu10k1 regression fixes and usual HD-audio quirks are included"
* tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: hda/realtek: Fix build error without CONFIG_PM
ALSA: hda/realtek: Fix conflicting PCI SSID 17aa:386f for Lenovo Legion models
ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318
ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node()
ALSA: hda: intel-dsp-config: harden I2C/I2S codec detection
ASoC: cs35l56: fix usages of device_get_named_child_node()
ASoC: da7219-aad: fix usage of device_get_named_child_node()
ASoC: meson: cards: select SND_DYNAMIC_MINORS
ASoC: meson: axg-tdm: add continuous clock support
ASoC: meson: axg-tdm-interface: manage formatters in trigger
ASoC: meson: axg-card: make links nonatomic
ASoC: meson: axg-fifo: use threaded irq to check periods
ALSA: hda/realtek: Fix mute led of HP Laptop 15-da3001TU
ALSA: emu10k1: make E-MU FPGA writes potentially more reliable
ALSA: emu10k1: fix E-MU dock initialization
ALSA: emu10k1: use mutex for E-MU FPGA access locking
ALSA: emu10k1: move the whole GPIO event handling to the workqueue
ALSA: emu10k1: factor out snd_emu1010_load_dock_firmware()
ALSA: emu10k1: fix E-MU card dock presence monitoring
ASoC: rt715-sdca: volume step modification
...
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, mostly made up from amdgpu and some panel changes.
Otherwise xe, nouveau, vmwgfx and a couple of others, all seems pretty
on track.
amdgpu:
- Fix VRAM memory accounting
- DCN 3.1 fixes
- DCN 2.0 fix
- DCN 3.1.5 fix
- DCN 3.5 fix
- DCN 3.2.1 fix
- DP fixes
- Seamless boot fix
- Fix call order in amdgpu_ttm_move()
- Fix doorbell regression
- Disable panel replay temporarily
amdkfd:
- Flush wq before creating kfd process
xe:
- Fix UAF on rebind worker
- Fix ADL-N display integration
imagination:
- fix page-count macro
nouveau:
- avoid page-table allocation failures
- fix firmware memory allocation
panel:
- ili9341: avoid OF for device properties; respect deferred probe;
fix usage of errno codes
ttm:
- fix status output
vmwgfx:
- fix legacy display unit
- fix read length in fence signalling"
* tag 'drm-fixes-2024-05-03' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/xe/display: Fix ADL-N detection
drm/panel: ili9341: Use predefined error codes
drm/panel: ili9341: Respect deferred probe
drm/panel: ili9341: Correct use of device property APIs
drm/xe/vm: prevent UAF in rebind_work_func()
drm/amd/display: Disable panel replay by default for now
drm/amdgpu: fix doorbell regression
drm/amdkfd: Flush the process wq before creating a kfd_process
drm/amd/display: Disable seamless boot on 128b/132b encoding
drm/amd/display: Fix DC mode screen flickering on DCN321
drm/amd/display: Add VCO speed parameter for DCN31 FPU
drm/amdgpu: once more fix the call oder in amdgpu_ttm_move() v2
drm/amd/display: Allocate zero bw after bw alloc enable
drm/amd/display: Fix incorrect DSC instance for MST
drm/amd/display: Atom Integrated System Info v2_2 for DCN35
drm/amd/display: Add dtbclk access to dcn315
drm/amd/display: Ensure that dmcub support flag is set for DCN20
drm/amd/display: Handle Y carry-over in VCP X.Y calculation
drm/amdgpu: Fix VRAM memory accounting
drm/vmwgfx: Fix invalid reads in fence signaled events
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small fixes for v6.9,
The core fix is for issues with reuse of a spi_message in the case
where we've got queued messages (a relatively rare occurrence with
modern code so it wasn't noticed in testing).
We also avoid an issue with the Kunpeng driver by simply removing the
debug interface that could trigger it, and address issues with
confusing and corrupted output when printing the IP version of the AXI
SPI engine"
* tag 'spi-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix null pointer dereference within spi_sync
spi: hisi-kunpeng: Delete the dump interface of data registers in debugfs
spi: axi-spi-engine: fix version format string
|
|
In current driver qcom_slim_ngd_up_worker() indefinitely
waiting for ctrl->qmi_up completion object. This is
resulting in workqueue lockup on Kthread.
Added wait_for_completion_interruptible_timeout to
allow the thread to wait for specific timeout period and
bail out instead waiting infinitely.
Fixes: a899d324863a ("slimbus: qcom-ngd-ctrl: add Sub System Restart support")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240430091238.35209-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
imagination:
- fix page-count macro
nouveau:
- avoid page-table allocation failures
- fix firmware memory allocation
panel:
- ili9341: avoid OF for device properties; respect deferred probe; fix
usage of errno codes
ttm:
- fix status output
vmwgfx:
- fix legacy display unit
- fix read length in fence signalling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502192117.GA12158@linux.fritz.box
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Fix UAF on rebind worker
- Fix ADL-N display integration
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6bontwst3mbxozs6u3ad5n3g5zmaucrngbfwv4hkfhpscnwlym@wlwjgjx6pwue
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.9-2024-05-01:
amdgpu:
- Fix VRAM memory accounting
- DCN 3.1 fixes
- DCN 2.0 fix
- DCN 3.1.5 fix
- DCN 3.5 fix
- DCN 3.2.1 fix
- DP fixes
- Seamless boot fix
- Fix call order in amdgpu_ttm_move()
- Fix doorbell regression
- Disable panel replay temporarily
amdkfd:
- Flush wq before creating kfd process
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240501135054.1919108-1-alexander.deucher@amd.com
|
|
We previously would call btrfs_check_leaf() if we had the check
integrity code enabled, which meant that we could only run the extended
leaf checks if we had WRITTEN set on the header flags.
This leaves a gap in our checking, because we could end up with
corruption on disk where WRITTEN isn't set on the leaf, and then the
extended leaf checks don't get run which we rely on to validate all of
the item pointers to make sure we don't access memory outside of the
extent buffer.
However, since 732fab95abe2 ("btrfs: check-integrity: remove
CONFIG_BTRFS_FS_CHECK_INTEGRITY option") we no longer call
btrfs_check_leaf() from btrfs_mark_buffer_dirty(), which means we only
ever call it on blocks that are being written out, and thus have WRITTEN
set, or that are being read in, which should have WRITTEN set.
Add checks to make sure we have WRITTEN set appropriately, and then make
sure __btrfs_check_leaf() always does the item checking. This will
protect us from file systems that have been corrupted and no longer have
WRITTEN set on some of the blocks.
This was hit on a crafted image tweaking the WRITTEN bit and reported by
KASAN as out-of-bound access in the eb accessors. The example is a dir
item at the end of an eb.
[2.042] BTRFS warning (device loop1): bad eb member start: ptr 0x3fff start 30572544 member offset 16410 size 2
[2.040] general protection fault, probably for non-canonical address 0xe0009d1000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI
[2.537] KASAN: maybe wild-memory-access in range [0x0005088000000018-0x000508800000001f]
[2.729] CPU: 0 PID: 2587 Comm: mount Not tainted 6.8.2 #1
[2.729] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[2.621] RIP: 0010:btrfs_get_16+0x34b/0x6d0
[2.621] RSP: 0018:ffff88810871fab8 EFLAGS: 00000206
[2.621] RAX: 0000a11000000003 RBX: ffff888104ff8720 RCX: ffff88811b2288c0
[2.621] RDX: dffffc0000000000 RSI: ffffffff81dd8aca RDI: ffff88810871f748
[2.621] RBP: 000000000000401a R08: 0000000000000001 R09: ffffed10210e3ee9
[2.621] R10: ffff88810871f74f R11: 205d323430333737 R12: 000000000000001a
[2.621] R13: 000508800000001a R14: 1ffff110210e3f5d R15: ffffffff850011e8
[2.621] FS: 00007f56ea275840(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000
[2.621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[2.621] CR2: 00007febd13b75c0 CR3: 000000010bb50000 CR4: 00000000000006f0
[2.621] Call Trace:
[2.621] <TASK>
[2.621] ? show_regs+0x74/0x80
[2.621] ? die_addr+0x46/0xc0
[2.621] ? exc_general_protection+0x161/0x2a0
[2.621] ? asm_exc_general_protection+0x26/0x30
[2.621] ? btrfs_get_16+0x33a/0x6d0
[2.621] ? btrfs_get_16+0x34b/0x6d0
[2.621] ? btrfs_get_16+0x33a/0x6d0
[2.621] ? __pfx_btrfs_get_16+0x10/0x10
[2.621] ? __pfx_mutex_unlock+0x10/0x10
[2.621] btrfs_match_dir_item_name+0x101/0x1a0
[2.621] btrfs_lookup_dir_item+0x1f3/0x280
[2.621] ? __pfx_btrfs_lookup_dir_item+0x10/0x10
[2.621] btrfs_get_tree+0xd25/0x1910
Reported-by: lei lu <llfamsec@gmail.com>
CC: stable@vger.kernel.org # 6.7+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copy more details from report ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
After kernel commit 86211eea8ae1 ("btrfs: qgroup: validate
btrfs_qgroup_inherit parameter"), user space tool snapper will fail to
create snapshot using its timeline feature.
[CAUSE]
It turns out that, if using timeline snapper would unconditionally pass
btrfs_qgroup_inherit parameter (assigning the new snapshot to qgroup 1/0)
for snapshot creation.
In that case, since qgroup is disabled there would be no qgroup 1/0, and
btrfs_qgroup_check_inherit() would return -ENOENT and fail the whole
snapshot creation.
[FIX]
Just skip the check if qgroup is not enabled.
This is to keep the older behavior for user space tools, as if the
kernel behavior changed for user space, it is a regression of kernel.
Thankfully snapper is also fixing the behavior by detecting if qgroup is
running in the first place, so the effect should not be that huge.
Link: https://github.com/openSUSE/snapper/issues/894
Fixes: 86211eea8ae1 ("btrfs: qgroup: validate btrfs_qgroup_inherit parameter")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- set correct ram_bytes when splitting ordered extent. This can be
inconsistent on-disk but harmless as it's not used for calculations
and it's only advisory for compression
- fix lockdep splat when taking cleaner mutex in qgroups disable ioctl
- fix missing mutex unlock on error path when looking up sys chunk for
relocation
* tag 'for-6.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: set correct ram_bytes when splitting ordered extent
btrfs: take the cleaner_mutex earlier in qgroup disable
btrfs: add missing mutex_unlock in btrfs_relocate_sys_chunks()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. Fix the callers
that provide the last byte within the range instead.
- 3270 Channel Command Word (CCW) may contain zero data address in case
there is no data in the request. Add data availability check to avoid
erroneous non-zero value as result of virt_to_dma32(NULL) application
in cases there is no data
- Add missing CFI directives for an unwinder to restore the return
address in the vDSO assembler code
- NUL-terminate kernel buffer when duplicating user space memory region
on Channel IO (CIO) debugfs write inject
- Fix wrong format string in zcrypt debug output
- Return -EBUSY code when a CCA card is temporarily unavailabile
- Restore a loop that retries derivation of a protected key from a
secure key in cases the low level reports temporarily unavailability
with -EBUSY code
* tag 's390-6.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/paes: Reestablish retry loop in paes
s390/zcrypt: Use EBUSY to indicate temp unavailability
s390/zcrypt: Handle ep11 cprb return code
s390/zcrypt: Fix wrong format string in debug feature printout
s390/cio: Ensure the copied buf is NUL terminated
s390/vdso: Add CFI for RA register to asm macro vdso_func
s390/3270: Fix buffer assignment
s390/mm: Fix clearing storage keys for huge pages
s390/mm: Fix storage key clearing for guest huge pages
|
|
Pull xtensa fixes from Max Filippov:
- fix unused variable warning caused by empty flush_dcache_page()
definition
- fix stack unwinding on windowed noMMU XIP configurations
- fix Coccinelle warning 'opportunity for min()' in xtensa ISS platform
code
* tag 'xtensa-20240502' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: remove redundant flush_dcache_page and ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE macros
tty: xtensa/iss: Use min() to fix Coccinelle warning
xtensa: fix MAKE_PC_FROM_RA second argument
|
|
With recent sanity checks for topology information added, there are now
warnings issued for APs when running as a Xen PV guest:
[Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0001
This is due to the initial APIC ID obtained via CPUID for PV guests is
always 0.
Avoid the warnings by synthesizing the CPUID data to contain the same
initial APIC ID as xen_pv_smp_config() is using for registering the
APIC IDs of all CPUs.
Fixes: 52128a7a21f7 ("86/cpu/topology: Make the APIC mismatch warnings complete")
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Contrary to i915, in xe ADL-N is kept as a different platform, not a
subplatform of ADL-P. Since the display side doesn't need to
differentiate between P and N, i.e. IS_ALDERLAKE_P_N() is never called,
just fixup the compat header to check for both P and N.
Moving ADL-N to be a subplatform would be more complex as the firmware
loading in xe only handles platforms, not subplatforms, as going forward
the direction is to check on IP version rather than
platforms/subplatforms.
Fix warning when initializing display:
xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH
------------[ cut here ]------------
xe 0000:00:02.0: drm_WARN_ON(!((dev_priv)->info.platform == XE_ALDERLAKE_S) && !((dev_priv)->info.platform == XE_ALDERLAKE_P))
And wrong paths being taken on the display side.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425181610.2704633-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 6a2a90cba12b42eb96c2af3426b77ceb4be31df2)
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"Two driver fixes:
- The firewire-ohci driver for 1394 OHCI hardware does not fill time
stamp for response packet when handling asynchronous transaction to
local destination. This brings an inconvenience that the response
packet is not equivalent between the transaction to local and
remote. It is fixed by fulfilling the time stamp with hardware
time. The fix should be applied to Linux kernel v6.5 or later as
well.
- The nosy driver for Texas Instruments TSB12LV21A (PCILynx) has
long-standing issue about the behaviour when user space application
passes less size of buffer than expected. It is fixed by returning
zero according to the convention of UNIX-like systems"
* tag 'firewire-fixes-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: fulfill timestamp for some local asynchronous transaction
firewire: nosy: ensure user_length is taken into account when fetching packet contents
|
|
The topology core expects the boot APIC to be registered from earhy APIC
detection first and then again when the firmware tables are evaluated. This
is used for detecting the real BSP CPU on a kexec kernel.
The recent conversion of XEN/PV to register fake APIC IDs failed to
register the boot CPU APIC correctly as it only registers it once. This
causes the BSP detection mechanism to trigger wrongly:
CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 0 > 1
Additionally this results in one CPU being ignored.
Register the boot CPU APIC twice so that the XEN/PV fake enumeration
behaves like real firmware.
Reported-by: Juergen Gross <jgross@suse.com>
Fixes: e75307023466 ("x86/xen/smp_pv: Register fake APICs")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/87a5l8s2fg.ffs@tglx
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix a memory leak and a few locking issues (that may cause the kernel
to crash in principle if all goes wrong) in the thermal debug code
introduced during the 6.8 development cycle"
* tag 'thermal-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/debugfs: Prevent use-after-free from occurring after cdev removal
thermal/debugfs: Fix two locking issues with thermal zone debug
thermal/debugfs: Free all thermal zone debug memory on zone removal
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Relatively calm week, likely due to public holiday in most places. No
known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates"
* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
MAINTAINERS: remove Ariel Elior
net: gro: add flush check in udp_gro_receive_segment
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
ipv4: Fix uninit-value access in __ip_make_skb()
s390/qeth: Fix kernel panic after setting hsuid
vxlan: Pull inner IP header in vxlan_rcv().
tipc: fix a possible memleak in tipc_buf_append
tipc: fix UAF in error path
rxrpc: Clients must accept conn from any address
net: core: reject skb_copy(_expand) for fraglist GSO skbs
net: bridge: fix multicast-to-unicast with fraglist GSO
mptcp: ensure snd_nxt is properly initialized on connect
e1000e: change usleep_range to udelay in PHY mdic access
net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
cxgb4: Properly lock TX queue for the selftest.
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
vxlan: Add missing VNI filter counter update in arp_reduce().
vxlan: Fix racy device stats updates.
net: qede: use return from qede_parse_actions()
...
|
|
git://git.infradead.org/nvme into block-6.9
Pull NVMe fixes from Keith.
* git://git.infradead.org/nvme:
nvme-tcp: strict pdu pacing to avoid send stalls on TLS
nvmet: fix nvme status code when namespace is disabled
nvmet-tcp: fix possible memory leak when tearing down a controller
nvme: cancel pending I/O if nvme controller is in terminal state
nvmet-auth: replace pr_debug() with pr_err() to report an error.
nvmet-auth: return the error code to the nvmet_auth_host_hash() callers
nvme: find numa distance only if controller has valid numa id
nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH
|
|
Using restricted DMA pools (CONFIG_DMA_RESTRICTED_POOL=y) in conjunction
with dynamic SWIOTLB (CONFIG_SWIOTLB_DYNAMIC=y) leads to the following
crash when initialising the restricted pools at boot-time:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
| Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
| pc : rmem_swiotlb_device_init+0xfc/0x1ec
| lr : rmem_swiotlb_device_init+0xf0/0x1ec
| Call trace:
| rmem_swiotlb_device_init+0xfc/0x1ec
| of_reserved_mem_device_init_by_idx+0x18c/0x238
| of_dma_configure_id+0x31c/0x33c
| platform_dma_configure+0x34/0x80
faddr2line reveals that the crash is in the list validation code:
include/linux/list.h:83
include/linux/rculist.h:79
include/linux/rculist.h:106
kernel/dma/swiotlb.c:306
kernel/dma/swiotlb.c:1695
because add_mem_pool() is trying to list_add_rcu() to a NULL
'mem->pools'.
Fix the crash by initialising the 'mem->pools' list_head in
rmem_swiotlb_device_init() before calling add_mem_pool().
Reported-by: Nikita Ioffe <ioffe@google.com>
Tested-by: Nikita Ioffe <ioffe@google.com>
Fixes: 1aaa736815eb ("swiotlb: allocate a new memory pool when existing pools are full")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Chris's email address bounces and lore hasn't seen an email
from anyone with his name for almost a decade.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430233532.1356982-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
aelior@marvell.com bounces, we haven't seen Ariel on lore
since March 2022.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240430233305.1356105-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Richard Gobert says:
====================
net: gro: add flush/flush_id checks and fix wrong offset in udp
This series fixes a bug in the complete phase of UDP in GRO, in which
socket lookup fails due to using network_header when parsing encapsulated
packets. The fix is to add network_offset and inner_network_offset to
napi_gro_cb and use these offsets for socket lookup.
In addition p->flush/flush_id should be checked in all UDP flows. The
same logic from tcp_gro_receive is applied for all flows in
udp_gro_receive_segment. This prevents packets with mismatching network
headers (flush/flush_id turned on) from merging in UDP GRO.
The original series includes a change to vxlan test which adds the local
parameter to prevent similar future bugs. I plan to submit it separately to
net-next.
This series is part of a previously submitted series to net-next:
https://lore.kernel.org/all/20240408141720.98832-1-richardbgobert@gmail.com/
v3 -> v4:
- Store network offsets, and use them only in udp_gro_complete flows
- Correct commit hash used in Fixes tag
- v3:
https://lore.kernel.org/netdev/20240424163045.123528-1-richardbgobert@gmail.com/
v2 -> v3:
- Add network_offsets and fix udp bug in a single commit to make backporting easier
- Write to inner_network_offset in {inet,ipv6}_gro_receive
- Use network_offsets union in tcp[46]_gro_complete as well
- v2:
https://lore.kernel.org/netdev/20240419153542.121087-1-richardbgobert@gmail.com/
v1 -> v2:
- Use network_offsets instead of p_poff param as suggested by Willem
- Check flush before postpull, and for all UDP GRO flows
- v1:
https://lore.kernel.org/netdev/20240412152120.115067-1-richardbgobert@gmail.com/
====================
Link: https://lore.kernel.org/r/20240430143555.126083-1-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
GRO-GSO path is supposed to be transparent and as such L3 flush checks are
relevant to all UDP flows merging in GRO. This patch uses the same logic
and code from tcp_gro_receive, terminating merge if flush is non zero.
Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
{inner_}network_offset to napi_gro_cb
Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.
This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.
This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.
To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.
Reproduction example:
Endpoint configuration example (fou + local address bind)
# ip fou add port 6666 ipproto 4
# ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
# ip link set tun1 up
# ip a add 1.1.1.2/24 dev tun1
Netperf TCP_STREAM result on net-next before patch is applied:
net-next main, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.28 2.37
net-next main, GRO disabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.01 2745.06
patch applied, GRO enabled:
$ netperf -H 1.1.1.2 -t TCP_STREAM -l 5
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
131072 16384 16384 5.01 2877.38
Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb()
tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a
race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL
while __ip_make_skb() is running, the function will access icmphdr in the
skb even if it is not included. This causes the issue reported by KMSAN.
Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL
on the socket.
Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These
are union in struct flowi4 and are implicitly initialized by
flowi4_init_output(), but we should not rely on specific union layout.
Initialize these explicitly in raw_sendmsg().
[1]
BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
__ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481
ip_finish_skb include/net/ip.h:243 [inline]
ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508
raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1318 [inline]
__ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128
ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365
raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648
inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x274/0x3c0 net/socket.c:745
__sys_sendto+0x62c/0x7b0 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x130/0x200 net/socket.c:2199
do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6d/0x75
CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
Fixes: 99e5acae193e ("ipv4: Fix potential uninit variable access bug in __ip_make_skb()")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20240430123945.2057348-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In one case the -1 is returned which is quite confusing code for
the wrong device ID, in another the ret is returning instead of
plain 0 that also confusing as readed may ask the possible meaning
of positive codes, which are never the case there. Convert both
to use explicit predefined error codes to make it clear what's going
on there.
Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com
|
|
GPIO controller might not be available when driver is being probed.
There are plenty of reasons why, one of which is deferred probe.
Since GPIOs are optional, return any error code we got to the upper
layer, including deferred probe. With that in mind, use dev_err_probe()
in order to avoid spamming the logs.
Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com
|
|
It seems driver missed the point of proper use of device property APIs.
Correct this by updating headers and calls respectively.
Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240425142706.2440113-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-2-andriy.shevchenko@linux.intel.com
|
|
Symptom:
When the hsuid attribute is set for the first time on an IQD Layer3
device while the corresponding network interface is already UP,
the kernel will try to execute a napi function pointer that is NULL.
Example:
---------------------------------------------------------------------------
[ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP
[ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6
nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de
s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod
qdio ccwgroup pkey zcrypt
[ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1
[ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR)
[ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2)
[ 2057.572748] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
[ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000
[ 2057.572754] 00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80
[ 2057.572756] 000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8
[ 2057.572758] 00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68
[ 2057.572762] Krnl Code:#0000000000000000: 0000 illegal
>0000000000000002: 0000 illegal
0000000000000004: 0000 illegal
0000000000000006: 0000 illegal
0000000000000008: 0000 illegal
000000000000000a: 0000 illegal
000000000000000c: 0000 illegal
000000000000000e: 0000 illegal
[ 2057.572800] Call Trace:
[ 2057.572801] ([<00000000ec639700>] 0xec639700)
[ 2057.572803] [<00000000913183e2>] net_rx_action+0x2ba/0x398
[ 2057.572809] [<0000000091515f76>] __do_softirq+0x11e/0x3a0
[ 2057.572813] [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58
[ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60)
[ 2057.572822] [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98
[ 2057.572825] [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70
[ 2057.572827] [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv]
[ 2057.572830] [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv]
[ 2057.572833] [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv]
[ 2057.572835] [<00000000912e7e90>] __sys_connect+0xa0/0xd8
[ 2057.572839] [<00000000912e9580>] sys_socketcall+0x228/0x348
[ 2057.572841] [<0000000091514e1a>] system_call+0x2a6/0x2c8
[ 2057.572843] Last Breaking-Event-Address:
[ 2057.572844] [<0000000091317e44>] __napi_poll+0x4c/0x1d8
[ 2057.572846]
[ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt
-------------------------------------------------------------------------------------------
Analysis:
There is one napi structure per out_q: card->qdio.out_qs[i].napi
The napi.poll functions are set during qeth_open().
Since
commit 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
qeth_set_offline()/qeth_set_online() no longer call dev_close()/
dev_open(). So if qeth_free_qdio_queues() cleared
card->qdio.out_qs[i].napi.poll while the network interface was UP and the
card was offline, they are not set again.
Reproduction:
chzdev -e $devno layer2=0
ip link set dev $network_interface up
echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online
echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid
echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online
-> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...)
Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid
is set for the first time or when it is removed.
Workarounds:
- Set hsuid before setting the device online for the first time
or
- Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno;
to set hsuid on an existing device. (this will remove and recreate the
network interface)
Fix:
There is no need to free the output queues when a completion queue is
added or removed.
card->qdio.state now indicates whether the inbound buffer pool and the
outbound queues are allocated.
card->qdio.c_q indicates whether a CQ is allocated.
Fixes: 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430091004.2265683-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The alc_spec.power_hook is defined only with CONFIG_PM, and the recent
fix overlooked it, resulting in a build error without CONFIG_PM.
Fix it with the simple ifdef and set __maybe_unused for the function.
We may drop the whole CONFIG_PM dependency there, but it should be
done in a separate cleanup patch later.
Fixes: 1e707769df07 ("ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405012104.Dr7h318W-lkp@intel.com/
Message-ID: <20240502062442.30545-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Ensure the inner IP header is part of skb's linear data before reading
its ECN bits. Otherwise we might read garbage.
One symptom is the system erroneously logging errors like
"vxlan: non-ECT from xxx.xxx.xxx.xxx with TOS=xxxx".
Similar bugs have been fixed in geneve, ip_tunnel and ip6_tunnel (see
commit 1ca1ba465e55 ("geneve: make sure to pull inner header in
geneve_rx()") for example). So let's reuse the same code structure for
consistency. Maybe we'll can add a common helper in the future.
Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/1239c8db54efec341dd6455c77e0380f58923a3c.1714495737.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__skb_linearize() doesn't free the skb when it fails, so move
'*buf = NULL' after __skb_linearize(), so that the skb can be
freed on the err path.
Fixes: b7df21cf1b79 ("tipc: skb_linearize the head skb when reassembling msgs")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/90710748c29a1521efac4f75ea01b3b7e61414cf.1714485818.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported
a UAF in the tipc_buf_append() error path:
BUG: KASAN: slab-use-after-free in kfree_skb_list_reason+0x47e/0x4c0
linux/net/core/skbuff.c:1183
Read of size 8 at addr ffff88804d2a7c80 by task poc/8034
CPU: 1 PID: 8034 Comm: poc Not tainted 6.8.2 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.0-debian-1.16.0-5 04/01/2014
Call Trace:
<IRQ>
__dump_stack linux/lib/dump_stack.c:88
dump_stack_lvl+0xd9/0x1b0 linux/lib/dump_stack.c:106
print_address_description linux/mm/kasan/report.c:377
print_report+0xc4/0x620 linux/mm/kasan/report.c:488
kasan_report+0xda/0x110 linux/mm/kasan/report.c:601
kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183
skb_release_data+0x5af/0x880 linux/net/core/skbuff.c:1026
skb_release_all linux/net/core/skbuff.c:1094
__kfree_skb linux/net/core/skbuff.c:1108
kfree_skb_reason+0x12d/0x210 linux/net/core/skbuff.c:1144
kfree_skb linux/./include/linux/skbuff.h:1244
tipc_buf_append+0x425/0xb50 linux/net/tipc/msg.c:186
tipc_link_input+0x224/0x7c0 linux/net/tipc/link.c:1324
tipc_link_rcv+0x76e/0x2d70 linux/net/tipc/link.c:1824
tipc_rcv+0x45f/0x10f0 linux/net/tipc/node.c:2159
tipc_udp_recv+0x73b/0x8f0 linux/net/tipc/udp_media.c:390
udp_queue_rcv_one_skb+0xad2/0x1850 linux/net/ipv4/udp.c:2108
udp_queue_rcv_skb+0x131/0xb00 linux/net/ipv4/udp.c:2186
udp_unicast_rcv_skb+0x165/0x3b0 linux/net/ipv4/udp.c:2346
__udp4_lib_rcv+0x2594/0x3400 linux/net/ipv4/udp.c:2422
ip_protocol_deliver_rcu+0x30c/0x4e0 linux/net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2e4/0x520 linux/net/ipv4/ip_input.c:233
NF_HOOK linux/./include/linux/netfilter.h:314
NF_HOOK linux/./include/linux/netfilter.h:308
ip_local_deliver+0x18e/0x1f0 linux/net/ipv4/ip_input.c:254
dst_input linux/./include/net/dst.h:461
ip_rcv_finish linux/net/ipv4/ip_input.c:449
NF_HOOK linux/./include/linux/netfilter.h:314
NF_HOOK linux/./include/linux/netfilter.h:308
ip_rcv+0x2c5/0x5d0 linux/net/ipv4/ip_input.c:569
__netif_receive_skb_one_core+0x199/0x1e0 linux/net/core/dev.c:5534
__netif_receive_skb+0x1f/0x1c0 linux/net/core/dev.c:5648
process_backlog+0x101/0x6b0 linux/net/core/dev.c:5976
__napi_poll.constprop.0+0xba/0x550 linux/net/core/dev.c:6576
napi_poll linux/net/core/dev.c:6645
net_rx_action+0x95a/0xe90 linux/net/core/dev.c:6781
__do_softirq+0x21f/0x8e7 linux/kernel/softirq.c:553
do_softirq linux/kernel/softirq.c:454
do_softirq+0xb2/0xf0 linux/kernel/softirq.c:441
</IRQ>
<TASK>
__local_bh_enable_ip+0x100/0x120 linux/kernel/softirq.c:381
local_bh_enable linux/./include/linux/bottom_half.h:33
rcu_read_unlock_bh linux/./include/linux/rcupdate.h:851
__dev_queue_xmit+0x871/0x3ee0 linux/net/core/dev.c:4378
dev_queue_xmit linux/./include/linux/netdevice.h:3169
neigh_hh_output linux/./include/net/neighbour.h:526
neigh_output linux/./include/net/neighbour.h:540
ip_finish_output2+0x169f/0x2550 linux/net/ipv4/ip_output.c:235
__ip_finish_output linux/net/ipv4/ip_output.c:313
__ip_finish_output+0x49e/0x950 linux/net/ipv4/ip_output.c:295
ip_finish_output+0x31/0x310 linux/net/ipv4/ip_output.c:323
NF_HOOK_COND linux/./include/linux/netfilter.h:303
ip_output+0x13b/0x2a0 linux/net/ipv4/ip_output.c:433
dst_output linux/./include/net/dst.h:451
ip_local_out linux/net/ipv4/ip_output.c:129
ip_send_skb+0x3e5/0x560 linux/net/ipv4/ip_output.c:1492
udp_send_skb+0x73f/0x1530 linux/net/ipv4/udp.c:963
udp_sendmsg+0x1a36/0x2b40 linux/net/ipv4/udp.c:1250
inet_sendmsg+0x105/0x140 linux/net/ipv4/af_inet.c:850
sock_sendmsg_nosec linux/net/socket.c:730
__sock_sendmsg linux/net/socket.c:745
__sys_sendto+0x42c/0x4e0 linux/net/socket.c:2191
__do_sys_sendto linux/net/socket.c:2203
__se_sys_sendto linux/net/socket.c:2199
__x64_sys_sendto+0xe0/0x1c0 linux/net/socket.c:2199
do_syscall_x64 linux/arch/x86/entry/common.c:52
do_syscall_64+0xd8/0x270 linux/arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6f/0x77 linux/arch/x86/entry/entry_64.S:120
RIP: 0033:0x7f3434974f29
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 73 01 c3 48 8b 0d 37 8f 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007fff9154f2b8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3434974f29
RDX: 00000000000032c8 RSI: 00007fff9154f300 RDI: 0000000000000003
RBP: 00007fff915532e0 R08: 00007fff91553360 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000212 R12: 000055ed86d261d0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
In the critical scenario, either the relevant skb is freed or its
ownership is transferred into a frag_lists. In both cases, the cleanup
code must not free it again: we need to clear the skb reference earlier.
Fixes: 1149557d64c9 ("tipc: eliminate unnecessary linearization of incoming buffers")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-23852
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/752f1ccf762223d109845365d07f55414058e5a3.1714484273.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The find connection logic of Transarc's Rx was modified in the mid-1990s
to support multi-homed servers which might send a response packet from
an address other than the destination address in the received packet.
The rules for accepting a packet by an Rx initiator (RX_CLIENT_CONNECTION)
were altered to permit acceptance of a packet from any address provided
that the port number was unchanged and all of the connection identifiers
matched (Epoch, CID, SecurityClass, ...).
This change applies the same rules to the Linux implementation which makes
it consistent with IBM AFS 3.6, Arla, OpenAFS and AuriStorFS.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: Jeffrey Altman <jaltman@auristor.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://lore.kernel.org/r/20240419163057.4141728-1-marc.dionne@auristor.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.9
This is much larger than is ideal, partly due to your holiday but also
due to several vendors having come in with relatively large fixes at
similar times. It's all driver specific stuff.
The meson fixes from Jerome fix some rare timing issues with blocking
operations happening in triggers, plus the continuous clock support
which fixes clocking for some platforms. The SOF series from Peter
builds to the fix to avoid spurious resets of ChainDMA which triggered
errors in cleanup paths with both PulseAudio and PipeWire, and there's
also some simple new debugfs files from Pierre which make support a lot
eaiser.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"There's a few simple driver specific fixes here, plus some core
cleanups from Matti which fix issues found with client drivers due to
the API being confusing.
The two fixes for the stubs provide more constructive behaviour with
!REGULATOR configurations, issues were noticed with some hwmon drivers
which would otherwise have needed confusing bodges in the users.
The irq_helpers fix to duplicate the provided name for the interrupt
controller was found because a driver got this wrong and it's again a
case where the core is the sensible place to put the fix"
* tag 'regulator-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: change devm_regulator_get_enable_optional() stub to return Ok
regulator: change stubbed devm_regulator_get_enable to return Ok
regulator: vqmmc-ipq4019: fix module autoloading
regulator: qcom-refgen: fix module autoloading
regulator: mt6360: De-capitalize devicetree regulator subnodes
regulator: irq_helpers: duplicate IRQ name
|
|
Currently, if an automatically freed allocation is an error pointer that
will lead to a crash. An example of this is in wm831x_gpio_dbg_show().
171 char *label __free(kfree) = gpiochip_dup_line_label(chip, i);
172 if (IS_ERR(label)) {
173 dev_err(wm831x->dev, "Failed to duplicate label\n");
174 continue;
175 }
The auto clean up function should check for error pointers as well,
otherwise we're going to keep hitting issues like this.
Fixes: 54da6a092431 ("locking: Introduce __cleanup() based infrastructure")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Commit 284f17ac13fe ("mm/slub: handle bulk and single object freeing
separately") splits single and bulk object freeing in two functions
slab_free() and slab_free_bulk() which leads slab_free() to call
slab_free_hook() directly instead of slab_free_freelist_hook().
If `init_on_free` is set, slab_free_hook() zeroes the object.
Afterward, if `slub_debug=F` and `CONFIG_SLAB_FREELIST_HARDENED` are
set, the do_slab_free() slowpath executes freelist consistency
checks and try to decode a zeroed freepointer which leads to a
"Freepointer corrupt" detection in check_object().
During bulk free, slab_free_freelist_hook() isn't affected as it always
sets it objects freepointer using set_freepointer() to maintain its
reconstructed freelist after `init_on_free`.
For single free, object's freepointer thus needs to be avoided when
stored outside the object if `init_on_free` is set. The freepointer left
as is, check_object() may later detect an invalid pointer value due to
objects overflow.
To reproduce, set `slub_debug=FU init_on_free=1 log_level=7` on the
command line of a kernel build with `CONFIG_SLAB_FREELIST_HARDENED=y`.
dmesg sample log:
[ 10.708715] =============================================================================
[ 10.710323] BUG kmalloc-rnd-05-32 (Tainted: G B T ): Freepointer corrupt
[ 10.712695] -----------------------------------------------------------------------------
[ 10.712695]
[ 10.712695] Slab 0xffffd8bdc400d580 objects=32 used=4 fp=0xffff9d9a80356f80 flags=0x200000000000a00(workingset|slab|node=0|zone=2)
[ 10.716698] Object 0xffff9d9a80356600 @offset=1536 fp=0x7ee4f480ce0ecd7c
[ 10.716698]
[ 10.716698] Bytes b4 ffff9d9a803565f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 10.720703] Object ffff9d9a80356600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 10.720703] Object ffff9d9a80356610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 10.724696] Padding ffff9d9a8035666c: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 10.724696] Padding ffff9d9a8035667c: 00 00 00 00 ....
[ 10.724696] FIX kmalloc-rnd-05-32: Object at 0xffff9d9a80356600 not freed
Fixes: 284f17ac13fe ("mm/slub: handle bulk and single object freeing separately")
Cc: <stable@vger.kernel.org>
Co-developed-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Nicolas Bouchinet <nicolas.bouchinet@ssi.gouv.fr>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
We flush the rebind worker during the vm close phase, however in places
like preempt_fence_work_func() we seem to queue the rebind worker
without first checking if the vm has already been closed. The concern
here is the vm being closed with the worker flushed, but then being
rearmed later, which looks like potential uaf, since there is no actual
refcounting to track the queued worker. We can't take the vm->lock here
in preempt_rebind_work_func() to first check if the vm is closed since
that will deadlock, so instead flush the worker again when the vm
refcount reaches zero.
v2:
- Grabbing vm->lock in the preempt worker creates a deadlock, so
checking the closed state is tricky. Instead flush the worker when
the refcount reaches zero. It should be impossible to queue the
preempt worker without already holding vm ref.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1676
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1591
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1364
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1304
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1249
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423074721.119633-4-matthew.auld@intel.com
(cherry picked from commit 3d44d67c441a9fe6f81a1d705f7de009a32a5b35)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Panel replay was enabled by default in commit 5950efe25ee0
("drm/amd/display: Enable Panel Replay for static screen use case"), but
it isn't working properly at least on some BOE and AUO panels. Instead
of being static the screen is solid black when active. As it's a new
feature that was just introduced that regressed VRR disable it for now
so that problem can be properly root caused.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344
Fixes: 5950efe25ee0 ("drm/amd/display: Enable Panel Replay for static screen use case")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become
invalid. Return NULL if such an skb is passed to skb_copy or
skb_copy_expand, in order to prevent a crash on a potential later
call to skb_gso_segment.
Fixes: 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Calling skb_copy on a SKB_GSO_FRAGLIST skb is not valid, since it returns
an invalid linearized skb. This code only needs to change the ethernet
header, so pskb_copy is the right function to call here.
Fixes: 6db6f0eae605 ("bridge: multicast to unicast")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TLS requires a strict pdu pacing via MSG_EOR to signal the end
of a record and subsequent encryption. If we do not set MSG_EOR
at the end of a sequence the record won't be closed, encryption
doesn't start, and we end up with a send stall as the message
will never be passed on to the TCP layer.
So do not check for the queue status when TLS is enabled but
rather make the MSG_MORE setting dependent on the current
request only.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If the user disabled a nvmet namespace, it is removed from the subsystem
namespaces list. When nvmet processes a command directed to an nsid that
was disabled, it cannot differentiate between a nsid that is disabled
vs. a non-existent namespace, and resorts to return NVME_SC_INVALID_NS
with the dnr bit set.
This translates to a non-retryable status for the host, which translates
to a user error. We should expect disabled namespaces to not cause an
I/O error in a multipath environment.
Address this by searching a configfs item for the namespace nvmet failed
to find, and if we found one, conclude that the namespace is disabled
(perhaps temporarily). Return NVME_SC_INTERNAL_PATH_ERROR in this case
and keep DNR bit cleared.
Reported-by: Jirong Feng <jirong.feng@easystack.cn>
Tested-by: Jirong Feng <jirong.feng@easystack.cn>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When we teardown the controller, we wait for pending I/Os to complete
(sq->ref on all queues to drop to zero) and then we go over the commands,
and free their command buffers in case they are still fetching data from
the host (e.g. processing nvme writes) and have yet to take a reference
on the sq.
However, we may miss the case where commands have failed before executing
and are queued for sending a response, but will never occur because the
queue socket is already down. In this case we may miss deallocating command
buffers.
Solve this by freeing all commands buffers as nvmet_tcp_free_cmd_buffers is
idempotent anyways.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
While I/O is running, if the pci bus error occurs then
in-flight I/O can not complete. Worst, if at this time,
user (logically) hot-unplug the nvme disk then the
nvme_remove() code path can't forward progress until
in-flight I/O is cancelled. So these sequence of events
may potentially hang hot-unplug code path indefinitely.
This patch helps cancel the pending/in-flight I/O from the
nvme request timeout handler in case the nvme controller
is in the terminal (DEAD/DELETING/DELETING_NOIO) state and
that helps nvme_remove() code path forward progress and
finish successfully.
Link: https://lore.kernel.org/all/199be893-5dfa-41e5-b6f2-40ac90ebccc4@linux.ibm.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In nvmet_auth_host_hash(), if a mismatch is detected in the hash length
the kernel should print an error.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If the nvmet_auth_host_hash() function fails, the error code should
be returned to its callers.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
On system where native nvme multipath is configured and iopolicy
is set to numa but the nvme controller numa node id is undefined
or -1 (NUMA_NO_NODE) then avoid calculating node distance for
finding optimal io path. In such case we may access numa distance
table with invalid index and that may potentially refer to incorrect
memory. So this patch ensures that if the nvme controller numa node
id is -1 then instead of calculating node distance for finding optimal
io path, we set the numa node distance of such controller to default 10
(LOCAL_DISTANCE).
Link: https://lore.kernel.org/all/20240413090614.678353-1-nilay@linux.ibm.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
With commit ed6776c96c60 ("s390/crypto: remove retry
loop with sleep from PAES pkey invocation") the retry
loop to retry derivation of a protected key from a
secure key has been removed. This was based on the
assumption that theses retries are not needed any
more as proper retries are done in the zcrypt layer.
However, tests have revealed that there exist some
cases with master key change in the HSM and immediately
(< 1 second) attempt to derive a protected key from a
secure key with exact this HSM may eventually fail.
The low level functions in zcrypt_ccamisc.c and
zcrypt_ep11misc.c detect and report this temporary
failure and report it to the caller as -EBUSY. The
re-established retry loop in the paes implementation
catches exactly this -EBUSY and eventually may run
some retries.
Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Use -EBUSY instead of -EAGAIN in zcrypt_ccamisc.c
in cases where the CCA card returns 8/2290 to indicate
a temporarily unavailability of this function.
Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
An EP11 reply cprb contains a field ret_code which may
hold an error code different than the error code stored
in the payload of the cprb. As of now all the EP11 misc
functions do not evaluate this field but focus on the
error code in the payload.
Before checking the payload error, first the cprb error
field should be evaluated which is introduced with this
patch.
If the return code value 0x000c0003 is seen, this
indicates a busy situation which is reflected by
-EBUSY in the zcrpyt_ep11misc.c low level function.
A higher level caller should consider to retry after
waiting a dedicated duration (say 1 second).
Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Fix wrong format string debug feature: %04x was used
to print out a 32 bit value. - changed to %08x.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The syzbot-reported stack trace from hell in this discussion thread
actually has three nested page faults:
https://lore.kernel.org/r/000000000000d5f4fc0616e816d4@google.com
... and I think that's actually the important thing here:
- the first page fault is from user space, and triggers the vsyscall
emulation.
- the second page fault is from __do_sys_gettimeofday(), and that should
just have caused the exception that then sets the return value to
-EFAULT
- the third nested page fault is due to _raw_spin_unlock_irqrestore() ->
preempt_schedule() -> trace_sched_switch(), which then causes a BPF
trace program to run, which does that bpf_probe_read_compat(), which
causes that page fault under pagefault_disable().
It's quite the nasty backtrace, and there's a lot going on.
The problem is literally the vsyscall emulation, which sets
current->thread.sig_on_uaccess_err = 1;
and that causes the fixup_exception() code to send the signal *despite* the
exception being caught.
And I think that is in fact completely bogus. It's completely bogus
exactly because it sends that signal even when it *shouldn't* be sent -
like for the BPF user mode trace gathering.
In other words, I think the whole "sig_on_uaccess_err" thing is entirely
broken, because it makes any nested page-faults do all the wrong things.
Now, arguably, I don't think anybody should enable vsyscall emulation any
more, but this test case clearly does.
I think we should just make the "send SIGSEGV" be something that the
vsyscall emulation does on its own, not this broken per-thread state for
something that isn't actually per thread.
The x86 page fault code actually tried to deal with the "incorrect nesting"
by having that:
if (in_interrupt())
return;
which ignores the sig_on_uaccess_err case when it happens in interrupts,
but as shown by this example, these nested page faults do not need to be
about interrupts at all.
IOW, I think the only right thing is to remove that horrendously broken
code.
The attached patch looks like the ObviouslyCorrect(tm) thing to do.
NOTE! This broken code goes back to this commit in 2011:
4fc3490114bb ("x86-64: Set siginfo and context on vsyscall emulation faults")
... and back then the reason was to get all the siginfo details right.
Honestly, I do not for a moment believe that it's worth getting the siginfo
details right here, but part of the commit says:
This fixes issues with UML when vsyscall=emulate.
... and so my patch to remove this garbage will probably break UML in this
situation.
I do not believe that anybody should be running with vsyscall=emulate in
2024 in the first place, much less if you are doing things like UML. But
let's see if somebody screams.
Reported-and-tested-by: syzbot+83e7f982ca045ab4405c@syzkaller.appspotmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/CAHk-=wh9D6f7HUkDgZHKmDCHUQmp+Co89GP+b8+z+G56BKeyNg@mail.gmail.com
|
|
If spi_sync() is called with the non-empty queue and the same spi_message
is then reused, the complete callback for the message remains set while
the context is cleared, leading to a null pointer dereference when the
callback is invoked from spi_finalize_current_message().
With function inlining disabled, the call stack might look like this:
_raw_spin_lock_irqsave from complete_with_flags+0x18/0x58
complete_with_flags from spi_complete+0x8/0xc
spi_complete from spi_finalize_current_message+0xec/0x184
spi_finalize_current_message from spi_transfer_one_message+0x2a8/0x474
spi_transfer_one_message from __spi_pump_transfer_message+0x104/0x230
__spi_pump_transfer_message from __spi_transfer_message_noqueue+0x30/0xc4
__spi_transfer_message_noqueue from __spi_sync+0x204/0x248
__spi_sync from spi_sync+0x24/0x3c
spi_sync from mcp251xfd_regmap_crc_read+0x124/0x28c [mcp251xfd]
mcp251xfd_regmap_crc_read [mcp251xfd] from _regmap_raw_read+0xf8/0x154
_regmap_raw_read from _regmap_bus_read+0x44/0x70
_regmap_bus_read from _regmap_read+0x60/0xd8
_regmap_read from regmap_read+0x3c/0x5c
regmap_read from mcp251xfd_alloc_can_err_skb+0x1c/0x54 [mcp251xfd]
mcp251xfd_alloc_can_err_skb [mcp251xfd] from mcp251xfd_irq+0x194/0xe70 [mcp251xfd]
mcp251xfd_irq [mcp251xfd] from irq_thread_fn+0x1c/0x78
irq_thread_fn from irq_thread+0x118/0x1f4
irq_thread from kthread+0xd8/0xf4
kthread from ret_from_fork+0x14/0x28
Fix this by also setting message->complete to NULL when the transfer is
complete.
Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Link: https://lore.kernel.org/r/20240430182705.13019-1-mans@mansr.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds a missed handling of PL domain doorbell while
handling VRAM faults.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: a6ff969fe9cb ("drm/amdgpu: fix visible VRAM handling during faults")
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a race condition when re-creating a kfd_process for a process.
This has been observed when a process under the debugger executes
exec(3). In this scenario:
- The process executes exec.
- This will eventually release the process's mm, which will cause the
kfd_process object associated with the process to be freed
(kfd_process_free_notifier decrements the reference count to the
kfd_process to 0). This causes kfd_process_ref_release to enqueue
kfd_process_wq_release to the kfd_process_wq.
- The debugger receives the PTRACE_EVENT_EXEC notification, and tries to
re-enable AMDGPU traps (KFD_IOC_DBG_TRAP_ENABLE).
- When handling this request, KFD tries to re-create a kfd_process.
This eventually calls kfd_create_process and kobject_init_and_add.
At this point the call to kobject_init_and_add can fail because the
old kfd_process.kobj has not been freed yet by kfd_process_wq_release.
This patch proposes to avoid this race by making sure to drain
kfd_process_wq before creating a new kfd_process object. This way, we
know that any cleanup task is done executing when we reach
kobject_init_and_add.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
preOS will not support display mode programming and link training
for UHBR rates.
[how]
If we detect a sink that's UHBR capable, disable seamless boot
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Christoph reported a splat hinting at a corrupted snd_una:
WARNING: CPU: 1 PID: 38 at net/mptcp/protocol.c:1005 __mptcp_clean_una+0x4b3/0x620 net/mptcp/protocol.c:1005
Modules linked in:
CPU: 1 PID: 38 Comm: kworker/1:1 Not tainted 6.9.0-rc1-gbbeac67456c9 #59
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:__mptcp_clean_una+0x4b3/0x620 net/mptcp/protocol.c:1005
Code: be 06 01 00 00 bf 06 01 00 00 e8 a8 12 e7 fe e9 00 fe ff ff e8
8e 1a e7 fe 0f b7 ab 3e 02 00 00 e9 d3 fd ff ff e8 7d 1a e7 fe
<0f> 0b 4c 8b bb e0 05 00 00 e9 74 fc ff ff e8 6a 1a e7 fe 0f 0b e9
RSP: 0018:ffffc9000013fd48 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff8881029bd280 RCX: ffffffff82382fe4
RDX: ffff8881003cbd00 RSI: ffffffff823833c3 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: fefefefefefefeff R12: ffff888138ba8000
R13: 0000000000000106 R14: ffff8881029bd908 R15: ffff888126560000
FS: 0000000000000000(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f604a5dae38 CR3: 0000000101dac002 CR4: 0000000000170ef0
Call Trace:
<TASK>
__mptcp_clean_una_wakeup net/mptcp/protocol.c:1055 [inline]
mptcp_clean_una_wakeup net/mptcp/protocol.c:1062 [inline]
__mptcp_retrans+0x7f/0x7e0 net/mptcp/protocol.c:2615
mptcp_worker+0x434/0x740 net/mptcp/protocol.c:2767
process_one_work+0x1e0/0x560 kernel/workqueue.c:3254
process_scheduled_works kernel/workqueue.c:3335 [inline]
worker_thread+0x3c7/0x640 kernel/workqueue.c:3416
kthread+0x121/0x170 kernel/kthread.c:388
ret_from_fork+0x44/0x50 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243
</TASK>
When fallback to TCP happens early on a client socket, snd_nxt
is not yet initialized and any incoming ack will copy such value
into snd_una. If the mptcp worker (dumbly) tries mptcp-level
re-injection after such ack, that would unconditionally trigger a send
buffer cleanup using 'bad' snd_una values.
We could easily disable re-injection for fallback sockets, but such
dumb behavior already helped catching a few subtle issues and a very
low to zero impact in practice.
Instead address the issue always initializing snd_nxt (and write_seq,
for consistency) at connect time.
Fixes: 8fd738049ac3 ("mptcp: fallback in case of simultaneous connect")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240429-upstream-net-20240429-mptcp-snd_nxt-init-connect-v1-1-59ceac0a7dcb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
[Why && How]
Screen flickering saw on 4K@60 eDP with high refresh rate external
monitor when booting up in DC mode. DC Mode Capping is disabled
which caused wrong UCLK being used.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add VCO speed parameters in the bounding box array.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is a partial revert of commit 6dbdd4de0362 ("e1000e: Workaround
for sporadic MDI error on Meteor Lake systems"). The referenced commit
used usleep_range inside the PHY access routines, which are sometimes
called from an atomic context. This can lead to a kernel panic in some
scenarios, such as cable disconnection and reconnection on vPro systems.
Solve this by changing the usleep_range calls back to udelay.
Fixes: 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems")
Cc: stable@vger.kernel.org
Reported-by: Jérôme Carretero <cJ@zougloub.eu>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218740
Closes: https://lore.kernel.org/lkml/a7eb665c74b5efb5140e6979759ed243072cb24a.camel@zougloub.eu/
Co-developed-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240429171040.1152516-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts drm/amdgpu: fix ftrace event amdgpu_bo_move always move
on same heap. The basic problem here is that after the move the old
location is simply not available any more.
Some fixes were suggested, but essentially we should call the move
notification before actually moving things because only this way we have
the correct order for DMA-buf and VM move notifications as well.
Also rework the statistic handling so that we don't update the eviction
counter before the move.
v2: add missing NULL check
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 94aeb4117343 ("drm/amdgpu: fix ftrace event amdgpu_bo_move always move on same heap")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3171
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
|
|
[Why]
During DP tunnel creation, CM preallocates BW and reduces
estimated BW of other DPIA. CM release preallocation only
when allocation is complete. Display mode validation logic
validates timings based on bw available per host router.
In multi display setup, this causes bw allocation failure
when allocation greater than estimated bw.
[How]
Do zero alloc to make the CM to release preallocation and
update estimated BW correctly for all DPIAs per host router.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why] DSC debugfs, such as dp_dsc_clock_en_read,
use aconnector->dc_link to find pipe_ctx for display.
Displays connected to MST hub share the same dc_link.
DSC instance is from pipe_ctx. This causes incorrect
DSC instance for display connected to MST hub.
[How] Add aconnector->sink check to find pipe_ctx.
CC: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
New request from KMD/VBIOS in order to support new UMA carveout
model. This fixes a null dereference from accessing
Ctx->dc_bios->integrated_info while it was NULL.
DAL parses through the BIOS and extracts the necessary
integrated_info but was missing a case for the new BIOS
version 2.3.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The Topaz family (88E6141 and 88E6341) only support 256 Forwarding
Information Tables.
Fixes: a75961d0ebfd ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341")
Fixes: 1558727a1c1b ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6141")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240429133832.9547-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
[Why & How]
Currently DCN315 clk manager is missing code to enable/disable dtbclk.
Because of this, "optimized_required" flag is constantly set
and this prevents FreeSync from engaging for certain high bandwidth
display Modes which require DTBCLK.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The selftest for the driver sends a dummy packet and checks if the
packet will be received properly as it should be. The regular TX path
and the selftest can use the same network queue so locking is required
and was missing in the selftest path. This was addressed in the commit
cited below.
Unfortunately locking the TX queue requires BH to be disabled which is
not the case in selftest path which is invoked in process context.
Lockdep should be complaining about this.
Use __netif_tx_lock_bh() for TX queue locking.
Fixes: c650e04898072 ("cxgb4: Fix race between loopback and normal Tx path")
Reported-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Closes: https://lore.kernel.org/all/Zic0ot5aGgR-V4Ks@thinkpad2021/
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240429091147.YWAaal4v@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rxrpc_alloc_data_txbuf() may be called with data_align being
zero in none_alloc_txbuf() and rxkad_alloc_txbuf(), data_align
is supposed to be an order-based alignment value, but zero is
not a valid order-based alignment value, and '~(data_align - 1)'
doesn't result in a valid mask-based alignment value for
__page_frag_alloc_align().
Fix it by passing a valid order-based alignment value in
none_alloc_txbuf() and rxkad_alloc_txbuf().
Also use page_frag_alloc_align() expecting an order-based
alignment value in rxrpc_alloc_data_txbuf() to avoid doing the
alignment converting operation and to catch possible invalid
alignment value in the future. Remove the 'if (data_align)'
checking too, as it is always true for a valid order-based
alignment value.
Fixes: 6b2536462fd4 ("rxrpc: Fix use of changed alignment param to page_frag_alloc_align()")
Fixes: 49489bb03a50 ("rxrpc: Do zerocopy using MSG_SPLICE_PAGES and page frags")
CC: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240428111640.27306-1-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the DCN20 resource initialization, ensure that DMCUB support starts
configured as true.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Theoretically rare corner case where ceil(Y) results in rounding up to
an integer. If this happens, the 1 should be carried over to the X
value.
CC: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Subtract the VRAM pinned memory when checking for available memory
in amdgpu_amdkfd_reserve_mem_limit function since that memory is not
available for use.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ublk_drv currently creates block devices with the default max_segments
and max_segment_size limits of BLK_MAX_SEGMENTS (128) and
BLK_MAX_SEGMENT_SIZE (65536) respectively. These defaults can
artificially constrain the I/O size seen by the ublk server - for
example, suppose that the ublk server has configured itself to accept
I/Os up to 1M and the application is also issuing 1M sized I/Os. If the
I/O buffer used by the application is backed by 4K pages, the buffer
could consist of up to 1M / 4K = 256 physically discontiguous segments
(even if the buffer is virtually contiguous). As such, the I/O could
exceed the default max_segments limit and get split. This can cause
unnecessary performance issues if the ublk server is optimized to handle
1M I/Os. The block layer's segment count/size limits exist to model
hardware constraints which don't exist in ublk_drv's case, so just
remove those limits for the block devices created by ublk_drv.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Riley Thomasson <riley@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240430211623.2802036-1-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
device_get_match_data() function should not be used on the device other
than the one matched to the given driver, because it always returns the
match_data of the matched driver. In case of exynos-clkout driver, the
original code matches the OF IDs on the PARENT device, so replacing it
with of_device_get_match_data() broke the driver.
This has been already pointed once in commit 2bc5febd05ab ("clk: samsung:
Revert "clk: samsung: exynos-clkout: Use of_device_get_match_data()"").
To avoid further confusion, add a comment about this special case, which
requires direct of_match_device() call to pass custom IDs array.
This partially reverts commit 409c39ec92a35e3708f5b5798c78eae78512cd71.
Cc: <stable@vger.kernel.org>
Fixes: 409c39ec92a3 ("clk: Use device_get_match_data()")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20240425075628.838497-1-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240430184656.357805-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Pull kvm fix from Paolo Bonzini:
"A pretty straightforward fix for a NULL pointer dereference, plus the
accompanying reproducer"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Add test for uaccesses to non-existent vgic-v2 CPUIF
KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()
|
|
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent the following section mismatch warning
WARNING: modpost: drivers/input/mouse/amimouse: section mismatch in reference: amimouse_driver+0x8 (section: .data) -> amimouse_remove (section: .exit.text)
that triggers on an allmodconfig W=1 build.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/2e3783106bf6bd9a7bdeb12b706378fb16316471.1711748999.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.9, part #2
- Fix + test for a NULL dereference resulting from unsanitised user
input in the vgic-v2 device attribute accessors
|
|
typec_register_partner() does not guarantee partner registration
to always succeed. In the event of failure, port->partner is set
to the error value or NULL. Given that port->partner validity is
not checked, this results in the following crash:
Unable to handle kernel NULL pointer dereference at virtual address xx
pc : run_state_machine+0x1bc8/0x1c08
lr : run_state_machine+0x1b90/0x1c08
..
Call trace:
run_state_machine+0x1bc8/0x1c08
tcpm_state_machine_work+0x94/0xe4
kthread_worker_fn+0x118/0x328
kthread+0x1d0/0x23c
ret_from_fork+0x10/0x20
To prevent the crash, check for port->partner validity before
derefencing it in all the call sites.
Cc: stable@vger.kernel.org
Fixes: c97cd0b4b54e ("usb: typec: tcpm: set initial svdm version based on pd revision")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240427202812.3435268-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Before sending Enter Mode for an Alt Mode, there is a gap between Discover
Modes and the Alt Mode driver queueing the Enter Mode VDM for the port
partner to send a message to the port.
If this message results in unregistering Alt Modes such as in a DR_SWAP,
then the following deadlock can occur with respect to the DisplayPort Alt
Mode driver:
1. The DR_SWAP state holds port->lock. Unregistering the Alt Mode driver
results in a cancel_work_sync() that waits for the current dp_altmode_work
to finish.
2. dp_altmode_work makes a call to tcpm_altmode_enter. The deadlock occurs
because tcpm_queue_vdm_unlock attempts to hold port->lock.
Before attempting to grab the lock, ensure that the port is in a state
vdm_run_state_machine can run in. Alt Mode unregistration will not occur
in these states.
Fixes: 03eafcfb60c0 ("usb: typec: tcpm: Add tcpm_queue_vdm_unlocked() helper")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240423202356.3372314-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check and unregister existing source caps in tcpm_register_source_caps
function before registering new ones. This change fixes following
warning when port partner resends source caps after negotiating PD contract
for the purpose of re-negotiation.
[ 343.135030][ T151] sysfs: cannot create duplicate filename '/devices/virtual/usb_power_delivery/pd1/source-capabilities'
[ 343.135071][ T151] Call trace:
[ 343.135076][ T151] dump_backtrace+0xe8/0x108
[ 343.135099][ T151] show_stack+0x18/0x24
[ 343.135106][ T151] dump_stack_lvl+0x50/0x6c
[ 343.135119][ T151] dump_stack+0x18/0x24
[ 343.135126][ T151] sysfs_create_dir_ns+0xe0/0x140
[ 343.135137][ T151] kobject_add_internal+0x228/0x424
[ 343.135146][ T151] kobject_add+0x94/0x10c
[ 343.135152][ T151] device_add+0x1b0/0x4c0
[ 343.135187][ T151] device_register+0x20/0x34
[ 343.135195][ T151] usb_power_delivery_register_capabilities+0x90/0x20c
[ 343.135209][ T151] tcpm_pd_rx_handler+0x9f0/0x15b8
[ 343.135216][ T151] kthread_worker_fn+0x11c/0x260
[ 343.135227][ T151] kthread+0x114/0x1bc
[ 343.135235][ T151] ret_from_fork+0x10/0x20
[ 343.135265][ T151] kobject: kobject_add_internal failed for source-capabilities with -EEXIST, don't try to register things with the same name in the same directory.
Fixes: 8203d26905ee ("usb: typec: tcpm: Register USB Power Delivery Capabilities")
Cc: linux-usb@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240424223227.1807844-1-amitsd@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a Fast Role Swap control message attempt results in a transition
to ERROR_RECOVERY, the TCPC can still queue a TCPM_SOURCING_VBUS event.
If the event is queued but processed after the tcpm_reset_port() call
in the PORT_RESET state, then the following occurs:
1. tcpm_reset_port() calls tcpm_init_vbus() to reset the vbus sourcing and
sinking state
2. tcpm_pd_event_handler() turns VBUS on before the port is in the default
state.
3. The port resolves as a sink. In the SNK_DISCOVERY state,
tcpm_set_charge() cannot set vbus to charge.
Clear pd events within PORT_RESET to get rid of non-applicable events.
Fixes: b17dd57118fe ("staging: typec: tcpm: Improve role swap with non PD capable partners")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240423202715.3375827-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tcpm_queue_vdm_unlocked queues VDMs over SOP regardless of input
parameter tx_sop_type. Fix tcpm_queue_vdm() call.
Fixes: 7e7877c55eb1 ("usb: typec: tcpm: add alt mode enter/exit/vdm support for sop'")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240423202546.3374218-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correctly set the length of the drm_event to the size of the structure
that's actually used.
The length of the drm_event was set to the parent structure instead of
to the drm_vmw_event_fence which is supposed to be read. drm_read
uses the length parameter to copy the event to the user space thus
resuling in oob reads.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 8b7de6aa8468 ("vmwgfx: Rework fence event action")
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-23566
Cc: David Airlie <airlied@gmail.com>
CC: Daniel Vetter <daniel@ffwll.ch>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v3.4+
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425192748.1761522-1-zack.rusin@broadcom.com
|
|
Currently we allocate all 3 levels of radix3 page tables using
nvkm_gsp_mem_ctor(), which uses dma_alloc_coherent() for allocating all of
the relevant memory. This can end up failing in scenarios where the system
has very high memory fragmentation, and we can't find enough contiguous
memory to allocate level 2 of the page table.
Currently, this can result in runtime PM issues on systems where memory
fragmentation is high - as we'll fail to allocate the page table for our
suspend/resume buffer:
kworker/10:2: page allocation failure: order:7, mode:0xcc0(GFP_KERNEL),
nodemask=(null),cpuset=/,mems_allowed=0
CPU: 10 PID: 479809 Comm: kworker/10:2 Not tainted
6.8.6-201.ChopperV6.fc39.x86_64 #1
Hardware name: SLIMBOOK Executive/Executive, BIOS N.1.10GRU06 02/02/2024
Workqueue: pm pm_runtime_work
Call Trace:
<TASK>
dump_stack_lvl+0x64/0x80
warn_alloc+0x165/0x1e0
? __alloc_pages_direct_compact+0xb3/0x2b0
__alloc_pages_slowpath.constprop.0+0xd7d/0xde0
__alloc_pages+0x32d/0x350
__dma_direct_alloc_pages.isra.0+0x16a/0x2b0
dma_direct_alloc+0x70/0x270
nvkm_gsp_radix3_sg+0x5e/0x130 [nouveau]
r535_gsp_fini+0x1d4/0x350 [nouveau]
nvkm_subdev_fini+0x67/0x150 [nouveau]
nvkm_device_fini+0x95/0x1e0 [nouveau]
nvkm_udevice_fini+0x53/0x70 [nouveau]
nvkm_object_fini+0xb9/0x240 [nouveau]
nvkm_object_fini+0x75/0x240 [nouveau]
nouveau_do_suspend+0xf5/0x280 [nouveau]
nouveau_pmops_runtime_suspend+0x3e/0xb0 [nouveau]
pci_pm_runtime_suspend+0x67/0x1e0
? __pfx_pci_pm_runtime_suspend+0x10/0x10
__rpm_callback+0x41/0x170
? __pfx_pci_pm_runtime_suspend+0x10/0x10
rpm_callback+0x5d/0x70
? __pfx_pci_pm_runtime_suspend+0x10/0x10
rpm_suspend+0x120/0x6a0
pm_runtime_work+0x98/0xb0
process_one_work+0x171/0x340
worker_thread+0x27b/0x3a0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
Luckily, we don't actually need to allocate coherent memory for the page
table thanks to being able to pass the GPU a radix3 page table for
suspend/resume data. So, let's rewrite nvkm_gsp_radix3_sg() to use the sg
allocator for level 2. We continue using coherent allocations for lvl0 and
1, since they only take a single page.
V2:
* Don't forget to actually jump to the next scatterlist when we reach the
end of the scatterlist we're currently on when writing out the page table
for level 2
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240429182318.189668-2-lyude@redhat.com
|
|
Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a
BUG() on startup:
kernel BUG at include/linux/scatterlist.h:187!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30
Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019
RIP: 0010:sg_init_one+0x85/0xa0
Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54
24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b
0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00
RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000
RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508
R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018
FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0
Call Trace:
<TASK>
? die+0x36/0x90
? do_trap+0xdd/0x100
? sg_init_one+0x85/0xa0
? do_error_trap+0x65/0x80
? sg_init_one+0x85/0xa0
? exc_invalid_op+0x50/0x70
? sg_init_one+0x85/0xa0
? asm_exc_invalid_op+0x1a/0x20
? sg_init_one+0x85/0xa0
nvkm_firmware_ctor+0x14a/0x250 [nouveau]
nvkm_falcon_fw_ctor+0x42/0x70 [nouveau]
ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau]
r535_gsp_oneinit+0xb3/0x15f0 [nouveau]
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? nvkm_udevice_new+0x95/0x140 [nouveau]
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? ktime_get+0x47/0xb0
? srso_return_thunk+0x5/0x5f
nvkm_subdev_oneinit_+0x4f/0x120 [nouveau]
nvkm_subdev_init_+0x39/0x140 [nouveau]
? srso_return_thunk+0x5/0x5f
nvkm_subdev_init+0x44/0x90 [nouveau]
nvkm_device_init+0x166/0x2e0 [nouveau]
nvkm_udevice_init+0x47/0x70 [nouveau]
nvkm_object_init+0x41/0x1c0 [nouveau]
nvkm_ioctl_new+0x16a/0x290 [nouveau]
? __pfx_nvkm_client_child_new+0x10/0x10 [nouveau]
? __pfx_nvkm_udevice_new+0x10/0x10 [nouveau]
nvkm_ioctl+0x126/0x290 [nouveau]
nvif_object_ctor+0x112/0x190 [nouveau]
nvif_device_ctor+0x23/0x60 [nouveau]
nouveau_cli_init+0x164/0x640 [nouveau]
nouveau_drm_device_init+0x97/0x9e0 [nouveau]
? srso_return_thunk+0x5/0x5f
? pci_update_current_state+0x72/0xb0
? srso_return_thunk+0x5/0x5f
nouveau_drm_probe+0x12c/0x280 [nouveau]
? srso_return_thunk+0x5/0x5f
local_pci_probe+0x45/0xa0
pci_device_probe+0xc7/0x270
really_probe+0xe6/0x3a0
__driver_probe_device+0x87/0x160
driver_probe_device+0x1f/0xc0
__driver_attach+0xec/0x1f0
? __pfx___driver_attach+0x10/0x10
bus_for_each_dev+0x88/0xd0
bus_add_driver+0x116/0x220
driver_register+0x59/0x100
? __pfx_nouveau_drm_init+0x10/0x10 [nouveau]
do_one_initcall+0x5b/0x320
do_init_module+0x60/0x250
init_module_from_file+0x86/0xc0
idempotent_init_module+0x120/0x2b0
__x64_sys_finit_module+0x5e/0xb0
do_syscall_64+0x83/0x160
? srso_return_thunk+0x5/0x5f
entry_SYSCALL_64_after_hwframe+0x71/0x79
RIP: 0033:0x7feeb5cc20cd
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0
ff ff 73 01 c3 48 8b 0d 1b cd 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffcf220b2c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055fdd2916aa0 RCX: 00007feeb5cc20cd
RDX: 0000000000000000 RSI: 000055fdd29161e0 RDI: 0000000000000035
RBP: 00007ffcf220b380 R08: 00007feeb5d8fb20 R09: 00007ffcf220b310
R10: 000055fdd2909dc0 R11: 0000000000000246 R12: 000055fdd29161e0
R13: 0000000000020000 R14: 000055fdd29203e0 R15: 000055fdd2909d80
</TASK>
We hit this when trying to initialize firmware of type
NVKM_FIRMWARE_IMG_DMA because we allocate our memory with
dma_alloc_coherent, and DMA allocations can't be turned back into memory
pages - which a scatterlist needs in order to map them.
So, fix this by allocating the memory with vmalloc instead().
V2:
* Fixup explanation as the prior one was bogus
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20240429182318.189668-1-lyude@redhat.com
|
|
Unfortunately both Lenovo Legion Pro 7 16ARX8H and Legion 7i 16IAX7
got the very same PCI SSID while the hardware implementations are
completely different (the former is with TI TAS2781 codec while the
latter is with Cirrus CS35L41 codec). The former model got broken by
the recent fix for the latter model.
For addressing the regression, check the codec SSID and apply the
proper quirk for each model now.
Fixes: 24b6332c2d4f ("ALSA: hda: Add Lenovo Legion 7i gen7 sound quirk")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1223462
Message-ID: <20240430163206.5200-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is a chance of damaging the IC when S4 resume.
Add safe mode for no stream to disable GPIO3.
Thinkpad with ALC1318 platform need to add this workaround.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/a853dc4f0a4e412381d5f60565181247@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- mt6360_charger: Fix of_match for usb-otg-vbus regulator
- rt9455: Fix unused-const-variable for !CONFIG_USB_PHY
* tag 'for-v6.9-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: mt6360_charger: Fix of_match for usb-otg-vbus regulator
power: rt9455: hide unused rt9455_boost_voltage_values
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Ilpo Järvinen:
- Add Grand Ridge to HPM CPU list
* tag 'platform-drivers-x86-v6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ISST: Add Grand Ridge to HPM CPU list
|
|
A virtual SuperSpeed device in the FreeBSD BVCP package
(https://bhyve.npulse.net/) presents an invalid ep0 maxpacket size of 256.
It stopped working with Linux following a recent commit because now we
check these sizes more carefully than before.
Fix this regression by using the bMaxpacketSize0 value in the device
descriptor for SuperSpeed or faster devices, even if it is invalid. This
is a very simple-minded change; we might want to check more carefully for
values that actually make some sense (for instance, no smaller than 64).
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Roger Whittaker <roger.whittaker@suse.com>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1220569
Link: https://lore.kernel.org/linux-usb/9efbd569-7059-4575-983f-0ea30df41871@suse.com/
Fixes: 59cf44575456 ("USB: core: Fix oversight in SuperSpeed initialization")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/4058ac05-237c-4db4-9ecc-5af42bdb4501@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Testing ohci functionality with qemu's pci-ohci emulation often results
in ohci interface stalls, resulting in hung task timeouts.
The problem is caused by lost interrupts between the emulation and the
Linux kernel code. Additional interrupts raised while the ohci interrupt
handler in Linux is running and before the handler clears the interrupt
status are not handled. The fix for a similar problem in ehci suggests
that the problem is likely caused by edge-triggered MSI interrupts. See
commit 0b60557230ad ("usb: ehci: Prevent missed ehci interrupts with
edge-triggered MSI") for details.
Ensure that the ohci interrupt code handles all pending interrupts before
returning to solve the problem.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: stable@vger.kernel.org
Fixes: 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI devices")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20240429154010.1507366-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix a double-free in the pinctrl_enable() errorpath
- Fix a refcount leak in pinctrl_dt_to_map()
- Fix selecting the GPIO pin control state and the UART3 pin config
group in the Intel Baytrail driver
- Fix readback of schmitt trigger status in the Mediatek Paris driver,
along with some semantic pin config issues in this driver
- Fix a pin suffix typo in the Meson A1 driver
- Fix an erroneous register offset in he Aspeed G6 driver
- Fix an inconsistent lock state and the interrupt type on resume in
the Renesas RZG2L driver
- Fix some minor confusion in the Renesas DT bindings
* tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: renesas: rzg2l: Configure the interrupt type on resume
pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map()
pinctrl: baytrail: Add pinconf group for uart3
pinctrl: baytrail: Fix selecting gpio pinctrl state
pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE
pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback
pinctrl: core: delete incorrect free in pinctrl_enable()
pinctrl/meson: fix typo in PDM's pin name
pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T
pinctrl: renesas: rzg2l: Execute atomically the interrupt configuration
dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input' and 'output-enable' properties
|
|
Merge series from Jerome Brunet <jbrunet@baylibre.com>:
This patchset fixes 2 problems on TDM which both find a solution
by properly implementing the .trigger() callback for the TDM backend.
ATM, enabling the TDM formatters is done by the .prepare() callback
because handling the formatter is slow due to necessary calls to CCF.
The first problem affects the TDMIN. Because .prepare() is called on DPCM
backend first, the formatter are started before the FIFOs and this may
cause a random channel shifts if the TDMIN use multiple lanes with more
than 2 slots per lanes. Using trigger() allows to set the FE/BE order,
solving the problem.
There has already been an attempt to fix this 3y ago [1] and reverted [2]
It triggered a 'sleep in irq' error on the period IRQ. The solution is
to just use the bottom half of threaded IRQ. This is patch #1. Patch #2
and #3 remain mostly the same as 3y ago.
For TDMOUT, the problem is on pause. ATM pause only stops the FIFO and
the TDMOUT just starves. When it does, it will actually repeat the last
sample continuously. Depending on the platform, if there is no high-pass
filter on the analog path, this may translate to a constant position of
the speaker membrane. There is no audible glitch but it may damage the
speaker coil.
Properly stopping the TDMOUT in pause solves the problem. There is
behaviour change associated with that fix. Clocks used to be continuous
on pause because of the problem above. They will now be gated on pause by
default, as they should. The last change introduce the proper support for
continuous clocks, if needed.
[1]: https://lore.kernel.org/linux-amlogic/20211020114217.133153-1-jbrunet@baylibre.com
[2]: https://lore.kernel.org/linux-amlogic/20220421155725.2589089-1-narmstrong@baylibre.com
|
|
[BUG]
When running generic/287, the following file extent items can be
generated:
item 16 key (258 EXTENT_DATA 2682880) itemoff 15305 itemsize 53
generation 9 type 1 (regular)
extent data disk byte 1378414592 nr 462848
extent data offset 0 nr 462848 ram 2097152
extent compression 0 (none)
Note that file extent item is not a compressed one, but its ram_bytes is
way larger than its disk_num_bytes.
According to btrfs on-disk scheme, ram_bytes should match disk_num_bytes
if it's not a compressed one.
[CAUSE]
Since commit b73a6fd1b1ef ("btrfs: split partial dio bios before
submit"), for partial dio writes, we would split the ordered extent.
However the function btrfs_split_ordered_extent() doesn't update the
ram_bytes even it has already shrunk the disk_num_bytes.
Originally the function btrfs_split_ordered_extent() is only introduced
for zoned devices in commit d22002fd37bd ("btrfs: zoned: split ordered
extent when bio is sent"), but later commit b73a6fd1b1ef ("btrfs: split
partial dio bios before submit") makes non-zoned btrfs affected.
Thankfully for un-compressed file extent, we do not really utilize the
ram_bytes member, thus it won't cause any real problem.
[FIX]
Also update btrfs_ordered_extent::ram_bytes inside
btrfs_split_ordered_extent().
Fixes: d22002fd37bd ("btrfs: zoned: split ordered extent when bio is sent")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix a BUG_ON from 2009. Even if it looks "unreachable" (I didn't
really look), lets make sure by removing it, doing pr_err and return
-EINVAL instead.
Cc: stable <stable@kernel.org>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20240429193145.66543-2-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-linus
Xu writes:
FPGA Manager changes for 6.9-final
DFL
- Peter adds PCI ID table for Intel D5005 Stratix 10 FPGA card
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our fixes branch)
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card
|
|
With 'iommu=off' on the kernel command line and x2APIC enabled by the BIOS
the code which disables the x2APIC triggers an unchecked MSR access error:
RDMSR from 0x802 at rIP: 0xffffffff94079992 (native_apic_msr_read+0x12/0x50)
This is happens because default_acpi_madt_oem_check() selects an x2APIC
driver before the x2APIC is disabled.
When the x2APIC is disabled because interrupt remapping cannot be enabled
due to 'iommu=off' on the command line, x2apic_disable() invokes
apic_set_fixmap() which in turn tries to read the APIC ID. This triggers
the MSR warning because x2APIC is disabled, but the APIC driver is still
x2APIC based.
Prevent that by adding an argument to apic_set_fixmap() which makes the
APIC ID read out conditional and set it to false from the x2APIC disable
path. That's correct as the APIC ID has already been read out during early
discovery.
Fixes: d10a904435fa ("x86/apic: Consolidate boot_cpu_physical_apicid initialization sites")
Reported-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/875xw5t6r7.ffs@tglx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Two doc update patches and the following three fixes:
- On single node systems, the default pool is used but the
node_nr_active for the default pool was set to min_active. This
effectively limited the max concurrency of unbound pools on single
node systems to 8 causing performance regressions on some
workloads. Fixed by setting the default pool's node_nr_active to
max_active.
- wq_update_node_max_active() could trigger divide-by-zero if the
intersection between the allowed CPUs for an unbound workqueue and
online CPUs becomes empty.
- When kick_pool() was trying to repatriate a worker to a CPU in its
pod by setting task->wake_cpu, it didn't consider whether the CPU
being selected is online or not which obviously can lead to
subobtimal behaviors. On s390, this triggered a crash in arch code.
The workqueue patch removes the gross misbehavior but doesn't fix
the crash completely as there's a race window in which CPUs can go
down after wake_cpu is set. Need to decide whether the fix should
be on the core or arch side"
* tag 'wq-for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Fix divide error in wq_update_node_max_active()
workqueue: The default node_nr_active should have its max set to max_active
workqueue: Fix selection of wake_cpu in kick_pool()
docs/zh_CN: core-api: Update translation of workqueue.rst to 6.9-rc1
Documentation/core-api: Update events_freezable_power references.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes
Pull Allwinner clk driver fixes from Jernej Skrabec:
- fix H6 CPU rate change via reparenting
- set A64 MIPI PLL min & max rate
* tag 'sunxi-clk-fixes-for-6.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: a64: Set minimum and maximum rate for PLL-MIPI
clk: sunxi-ng: common: Support minimum and maximum rate
clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Minor core fix to prevent the sd driver printing the stream count
every time we rescan and instead print only if it's changed"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Only print updates to permanent stream count
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Avoid freeing unallocated memory (v6.7 regression)
* tag 'nfsd-6.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix nfsd4_encode_fattr4() crasher
|
|
Pull NFS client fixes from Trond Myklebust:
- Fix an Oops in xs_tcp_tls_setup_socket
- Fix an Oops due to missing error handling in nfs_net_init()
* tag 'nfs-for-6.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Handle error of rpc_proc_register() in nfs_net_init().
SUNRPC: add a missing rpc_stat for TCP TLS
|
|
Pull bcachefs fixes from Kent Overstreet:
"Tiny set of fixes this time"
* tag 'bcachefs-2024-04-29' of https://evilpiepirate.org/git/bcachefs:
bcachefs: fix integer conversion bug
bcachefs: btree node scan now fills in sectors_written
bcachefs: Remove accidental debug assert
|
|
Currently, we allocate a lbuf-sized kernel buffer and copy lbuf from
userspace to that buffer. Later, we use scanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using scanf. Fix this issue by using memdup_user_nul instead.
Fixes: a4f17cc72671 ("s390/cio: add CRW inject functionality")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-5-f1f1b53a10f4@gmail.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Robert reported the following when booting a CXL host with Restricted CXL
Host (RCH) topology:
[ 39.815379] cxl_acpi ACPI0017:00: not a cxl_port device
[ 39.827123] WARNING: CPU: 46 PID: 1754 at drivers/cxl/core/port.c:592 to_cxl_port+0x56/0x70 [cxl_core]
... plus some related subsequent NULL pointer dereference:
[ 40.718708] BUG: kernel NULL pointer dereference, address: 00000000000002d8
The iterator to walk the PCIe path did not account for RCH topology.
However RCH does not support hotplug and the memory exported by the
Restricted CXL Device (RCD) should be covered by HMAT and therefore no
access_coordinate is needed. Add check to see if the endpoint device is
RCD and skip calculation.
Also add a call to cxl_endpoint_get_perf_coordinates() in cxl_test in order
to exercise the topology iterator. The dev_is_pci() check added is to help
with this test and should be harmless for normal operation.
Reported-by: Robert Richter <rrichter@amd.com>
Closes: https://lore.kernel.org/all/Ziv8GfSMSbvlBB0h@rric.localdomain/
Fixes: 592780b8391f ("cxl: Fix retrieving of access_coordinates in PCIe path")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20240426224913.1027420-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Three fixes related to EROFS fscache mode. The most important two
patches fix calling kill_block_super() in bdev-based mode instead of
kill_anon_super(). The remaining patch is an informative one.
Summary:
- Better error message when prepare_ondemand_read failed
- Fix unmount of bdev-based mode if CONFIG_EROFS_FS_ONDEMAND is on"
* tag 'erofs-for-6.9-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: reliably distinguish block based and fscache mode
erofs: get rid of erofs_fs_context
erofs: modify the error message when prepare_ondemand_read failed
|
|
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid a leaked reference.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 08c2a4bc9f2a ("ALSA: hda: move Intel SoundWire ACPI scan to dedicated module")
Message-ID: <20240426152731.38420-1-pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
bits_per() rounds up to the next power of two when passed a power of
two. This causes crashes on some machines and configurations.
Reported-by: Михаил Новоселов <m.novosyolov@rosalinux.ru>
Tested-by: Ильфат Гаптрахманов <i.gaptrakhmanov@rosalinux.ru>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3347
Link: https://lore.kernel.org/all/1c978cf1-2934-4e66-e4b3-e81b04cb3571@rosalinux.ru/
Fixes: f2d5dcb48f7b (bounds: support non-power-of-two CONFIG_NR_CPUS)
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The SOF driver is selected whenever specific I2C/I2S HIDs are reported
as 'present' in the ACPI DSDT. In some cases, an HID is reported but
the hardware does not actually rely on I2C/I2S. This false positive
leads to an invalid selection of the SOF driver and as a result an
invalid topology is loaded.
This patch hardens the detection with a check that the NHLT table is
consistent with the report of an I2S-based codec in DSDT. This table
should expose at least one SSP endpoint configured for an I2S-codec
connection.
Tested on Huawei Matebook D14 (NBLB-WAX9N) using an HDaudio codec with
an invalid ES8336 ACPI HID reported:
[ 7.858249] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 7.858312] snd_hda_intel 0000:00:1f.3: snd_intel_dsp_find_config: no valid SSP found for HID ESSX8336, skipped
Reported-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Closes: https://github.com/thesofproject/linux/issues/4934
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Message-ID: <20240426152818.38443-1-pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid leaked references.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152939.38471-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid a leaked reference.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153033.38500-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Amlogic sound cards do create a lot of pcm interfaces, possibly more than
8. Some pcm interfaces are internal (like DPCM backends and c2c) and not
exposed to userspace.
Those interfaces still increase the number passed to snd_find_free_minor(),
which eventually exceeds 8 causing -EBUSY error on card registration if
CONFIG_SND_DYNAMIC_MINORS=n and the interface is exposed to userspace.
select CONFIG_SND_DYNAMIC_MINORS for Amlogic cards to avoid the problem.
Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426134150.3053741-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some devices may need the clocks running, even while paused.
Add support for this use case.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-5-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
So far, the formatters have been reset/enabled using the .prepare()
callback. This was done in this callback because walking the formatters use
a mutex. A mutex is used because formatter handling require dealing
possibly slow clock operation.
With the support of non-atomic, .trigger() callback may be used which also
allows to properly enable and disable formatters on start but also
pause/resume.
This solve a random shift on TDMIN as well repeated samples on for TDMOUT.
Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-4-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Non atomic operations need to be performed in the trigger callback
of the TDM interfaces. Those are BEs but what matters is the nonatomic
flag of the FE in the DPCM context. Just set nonatomic for everything so,
at least, what is done is clear.
Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the AXG audio subsystem, there is a possible random channel shift on
TDM capture, when the slot number per lane is more than 2, and there is
more than one lane used.
The problem has been there since the introduction of the axg audio support
but such scenario is pretty uncommon. This is why there is no loud
complains about the problem.
Solving the problem require to make the links non-atomic and use the
trigger() callback to start FEs and BEs in the appropriate order.
This was tried in the past and reverted because it caused the block irq to
sleep while atomic. However, instead of reverting, the solution is to call
snd_pcm_period_elapsed() in a non atomic context.
Use the bottom half of a threaded IRQ to do so.
Fixes: 6dc4fa179fb8 ("ASoC: meson: add axg fifo base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If traceprobe_parse_probe_arg_body() failed to allocate 'parg->fmt',
it jumps to the label 'out' instead of 'fail' by mistake.In the result,
the buffer 'tmp' is not freed in this case and leaks its memory.
Thus jump to the label 'fail' in that error case.
Link: https://lore.kernel.org/all/20240427072347.1421053-1-lumingyindetect@126.com/
Fixes: 032330abd08b ("tracing/probes: Cleanup probe argument parser")
Signed-off-by: LuMingYin <lumingyindetect@126.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Guillaume Nault says:
====================
vxlan: Fix vxlan counters.
Like most virtual devices, vxlan needs special care when updating its
netdevice counters. This is done in patch 1. Patch 2 just adds a
missing VNI counter update (found while working on patch 1).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
VXLAN stores per-VNI statistics using vxlan_vnifilter_count().
These statistics were not updated when arp_reduce() failed its
pskb_may_pull() call.
Use vxlan_vnifilter_count() to update the VNI counter when that
happens.
Fixes: 4095e0e1328a ("drivers: vxlan: vnifilter: per vni stats")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
VXLAN devices update their stats locklessly. Therefore these counters
should either be stored in per-cpu data structures or the updates
should be done using atomic increments.
Since the net_device_core_stats infrastructure is already used in
vxlan_rcv(), use it for the other rx_dropped and tx_dropped counter
updates. Update the other counters atomically using DEV_STATS_INC().
Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch simply add SND_PCI_QUIRK for HP Laptop 15-da3001TU to fixed
mute led of laptop.
Signed-off-by: Aman Dhoot <amandhoot12@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAMTp=B+3NG65Z684xMwHqdXDJhY+DJK-kuSw4adn6xwnG+b5JA@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When the host page size was more than 4 times larger than the FW page
size, this macro evaluated to zero resulting in zero-sized arrays.
Use DIV_ROUND_UP() to ensure the correct behavior.
Reported-by: 20240228012313.5934-1-yaolu@kylinos.cn
Closes: https://lore.kernel.org/dri-devel/20240228012313.5934-1-yaolu@kylinos.cn
Link: https://lore.kernel.org/dri-devel/20240228012313.5934-1-yaolu@kylinos.cn
Fixes: 927f3e0253c1 ("drm/imagination: Implement MIPS firmware processor and MMU support")
Cc: stable@vger.kernel.org
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
|
|
Add Grand Ridge (ATOM_CRESTMONT) to hpm_cpu_ids, so that MSR 0x54 can be
used.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240422212222.3881606-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
1394 OHCI driver generates packet data for the response subaction to the
request subaction to some local registers. In the case, the driver should
assign timestamp to them by itself.
This commit fulfills the timestamp for the subaction.
Cc: stable@vger.kernel.org
Fixes: dcadfd7f7c74 ("firewire: core: use union for callback of transaction completion")
Link: https://lore.kernel.org/r/20240429084709.707473-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
packet contents
Ensure that packet_buffer_get respects the user_length provided. If
the length of the head packet exceeds the user_length, packet_buffer_get
will now return 0 to signify to the user that no data were read
and a larger buffer size is required. Helps prevent user space overflows.
Signed-off-by: Thanassis Avgerinos <thanassis.avgerinos@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Handle cases where the RMP table placement in the BIOS is not 2M aligned
and the kexec-ed kernel could try to allocate from within that chunk
which then causes a fatal RMP fault.
The kexec failure is illustrated below:
SEV-SNP: RMP table physical range [0x0000007ffe800000 - 0x000000807f0fffff]
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
...
BIOS-e820: [mem 0x0000004080000000-0x0000007ffe7fffff] usable
BIOS-e820: [mem 0x0000007ffe800000-0x000000807f0fffff] reserved
BIOS-e820: [mem 0x000000807f100000-0x000000807f1fefff] usable
As seen here in the e820 memory map, the end range of the RMP table is not
aligned to 2MB and not reserved but it is usable as RAM.
Subsequently, kexec -s (KEXEC_FILE_LOAD syscall) loads it's purgatory
code and boot_param, command line and other setup data into this RAM
region as seen in the kexec logs below, which leads to fatal RMP fault
during kexec boot.
Loaded purgatory at 0x807f1fa000
Loaded boot_param, command line and misc at 0x807f1f8000 bufsz=0x1350 memsz=0x2000
Loaded 64bit kernel at 0x7ffae00000 bufsz=0xd06200 memsz=0x3894000
Loaded initrd at 0x7ff6c89000 bufsz=0x4176014 memsz=0x4176014
E820 memmap:
0000000000000000-000000000008efff (1)
000000000008f000-000000000008ffff (4)
0000000000090000-000000000009ffff (1)
...
0000004080000000-0000007ffe7fffff (1)
0000007ffe800000-000000807f0fffff (2)
000000807f100000-000000807f1fefff (1)
000000807f1ff000-000000807fffffff (2)
nr_segments = 4
segment[0]: buf=0x00000000e626d1a2 bufsz=0x4000 mem=0x807f1fa000 memsz=0x5000
segment[1]: buf=0x0000000029c67bd6 bufsz=0x1350 mem=0x807f1f8000 memsz=0x2000
segment[2]: buf=0x0000000045c60183 bufsz=0xd06200 mem=0x7ffae00000 memsz=0x3894000
segment[3]: buf=0x000000006e54f08d bufsz=0x4176014 mem=0x7ff6c89000 memsz=0x4177000
kexec_file_load: type:0, start:0x807f1fa150 head:0x1184d0002 flags:0x0
Check if RMP table start and end physical range in the e820 tables are
not aligned to 2MB and in that case map this range to reserved in all
the three e820 tables.
[ bp: Massage. ]
Fixes: c3b86e61b756 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/df6e995ff88565262c2c7c69964883ff8aa6fc30.1714090302.git.ashish.kalra@amd.com
|
|
In __pci_register_driver(), the pci core overwrites the dev_groups field of
the embedded struct device_driver with the dev_groups from the outer
struct pci_driver unconditionally.
Set dev_groups in the pci_driver to make sure it is used.
This was broken since the introduction of pvpanic-pci.
Fixes: db3a4f0abefd ("misc/pvpanic: add PCI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Fixes: ded13b9cfd59 ("PCI: Add support for dev_groups to struct pci_driver")
Link: https://lore.kernel.org/r/20240411-pvpanic-pci-dev-groups-v1-1-db8cb69f1b09@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a new API helper e820__range_update_table() with which to update an
arbitrary e820 table. Move all current users of
e820__range_update_kexec() to this new helper.
[ bp: Massage. ]
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/b726af213ad55053f8a7a1e793b01bb3f1ca9dd5.1714090302.git.ashish.kalra@amd.com
|
|
Asbjørn Sloth Tønnesen says:
====================
net: qede: avoid overruling error codes
This series fixes the qede driver, so that
qede_parse_flow_attr() and it's subfunctions
doesn't get their error codes overruled
(ie. turning -EOPNOTSUPP into -EINVAL).
---
I have two more patches along the same lines,
but they are not yet causing any issues,
so I have them destined for net-next.
(those are for qede_flow_spec_validate_unused()
and qede_flow_parse_ports().)
After that I have a series for converting to
extack + the final one for validating control
flags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When calling qede_parse_actions() then the
return code was only used for a non-zero check,
and then -EINVAL was returned.
qede_parse_actions() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
This patch changes the code to use the actual
return code, not just return -EINVAL.
The blaimed commit broke the implicit assumption
that only -EINVAL would ever be returned.
Only compile tested.
Fixes: 319a1d19471e ("flow_offload: check for basic action hw stats type")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In qede_flow_spec_to_rule(), when calling
qede_parse_flow_attr() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.
qede_parse_flow_attr() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
* -EPROTONOSUPPORT
This patch changes the code to use the actual
return code, not just return -EINVAL.
The blaimed commit introduced qede_flow_spec_to_rule(),
and this call to qede_parse_flow_attr(), it looks
like it just duplicated how it was already used.
Only compile tested.
Fixes: 37c5d3efd7f8 ("qede: use ethtool_rx_flow_rule() to remove duplicated parser code")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In qede_add_tc_flower_fltr(), when calling
qede_parse_flow_attr() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.
qede_parse_flow_attr() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
* -EPROTONOSUPPORT
This patch changes the code to use the actual
return code, not just return -EINVAL.
The blaimed commit introduced these functions.
Only compile tested.
Fixes: 2ce9c93eaca6 ("qede: Ingress tc flower offload (drop action) support.")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Explicitly set 'rc' (return code), before jumping to the
unlock and return path.
By not having any code depend on that 'rc' remains at
it's initial value of -EINVAL, then we can re-use 'rc' for
the return code of function calls in subsequent patches.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Donald has been contributing to YNL a lot. Let's create a dedicated
MAINTAINERS entry and add make his involvement official :)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Doug Berger says:
====================
net: bcmgenet: protect contended accesses
Some registers may be modified by parallel execution contexts and
require protections to prevent corruption.
A review of the driver revealed the need for these additional
protections.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The UMAC_CMD register is written from different execution
contexts and has insufficient synchronization protections to
prevent possible corruption. Of particular concern are the
acceses from the phy_device delayed work context used by the
adjust_link call and the BH context that may be used by the
ndo_set_rx_mode call.
A spinlock is added to the driver to protect contended register
accesses (i.e. reg_lock) and it is used to synchronize accesses
to UMAC_CMD.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Cc: stable@vger.kernel.org
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ndo_set_rx_mode function is synchronized with the
netif_addr_lock spinlock and BHs disabled. Since this
function is also invoked directly from the driver the
same synchronization should be applied.
Fixes: 72f96347628e ("net: bcmgenet: set Rx mode before starting netif")
Cc: stable@vger.kernel.org
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The EXT_RGMII_OOB_CTRL register can be written from different
contexts. It is predominantly written from the adjust_link
handler which is synchronized by the phydev->lock, but can
also be written from a different context when configuring the
mii in bcmgenet_mii_config().
The chances of contention are quite low, but it is conceivable
that adjust_link could occur during resume when WoL is enabled
so use the phydev->lock synchronizer in bcmgenet_mii_config()
to be sure.
Fixes: afe3f907d20f ("net: bcmgenet: power on MII block for all MII modes")
Cc: stable@vger.kernel.org
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE macros
xtensa's flush_dcache_page() can be a no-op sometimes. There is a
generic implementation for this case in include/asm-generic/
cacheflush.h.
#ifndef ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
static inline void flush_dcache_page(struct page *page)
{
}
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
#endif
So remove the superfluous flush_dcache_page() definition, which also
helps silence potential build warnings complaining the page variable
passed to flush_dcache_page() is not used.
In file included from crypto/scompress.c:12:
include/crypto/scatterwalk.h: In function 'scatterwalk_pagedone':
include/crypto/scatterwalk.h:76:30: warning: variable 'page' set but not used [-Wunused-but-set-variable]
76 | struct page *page;
| ^~~~
crypto/scompress.c: In function 'scomp_acomp_comp_decomp':
>> crypto/scompress.c:174:38: warning: unused variable 'dst_page' [-Wunused-variable]
174 | struct page *dst_page = sg_page(req->dst);
|
The issue was originally reported on LoongArch by kernel test
robot (Huacai fixed it on LoongArch), then reported by Guenter
and me on xtensa.
This patch also removes lots of redundant macros which have
been defined by asm-generic/cacheflush.h.
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403091614.NeUw5zcv-lkp@intel.com/
Reported-by: Barry Song <v-songbaohua@oppo.com>
Closes: https://lore.kernel.org/all/CAGsJ_4yDk1+axbte7FKQEwD7X2oxUCFrEc9M5YOS1BobfDFXPA@mail.gmail.com/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/aaa8b7d7-5abe-47bf-93f6-407942436472@roeck-us.net/
Fixes: 77292bb8ca69 ("crypto: scomp - remove memcpy if sg_nents is 1 and pages are lowmem")
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Message-Id: <20240319010920.125192-1-21cnbao@gmail.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Currently, the condition "__this_cpu_read(ksoftirqd) == current" is used to
invoke rcu_softirq_qs() in ksoftirqd tasks context for non-RT kernels.
This works correctly as long as the context is actually task context but
this condition is wrong when:
- the current task is ksoftirqd
- the task is interrupted in a RCU read side critical section
- __do_softirq() is invoked on return from interrupt
Syzkaller triggered the following scenario:
-> finish_task_switch()
-> put_task_struct_rcu_user()
-> call_rcu(&task->rcu, delayed_put_task_struct)
-> __kasan_record_aux_stack()
-> pfn_valid()
-> rcu_read_lock_sched()
<interrupt>
__irq_exit_rcu()
-> __do_softirq)()
-> if (!IS_ENABLED(CONFIG_PREEMPT_RT) &&
__this_cpu_read(ksoftirqd) == current)
-> rcu_softirq_qs()
-> RCU_LOCKDEP_WARN(lock_is_held(&rcu_sched_lock_map))
The rcu quiescent state is reported in the rcu-read critical section, so
the lockdep warning is triggered.
Fix this by splitting out the inner working of __do_softirq() into a helper
function which takes an argument to distinguish between ksoftirqd task
context and interrupted context and invoke it from the relevant call sites
with the proper context information and use that for the conditional
invocation of rcu_softirq_qs().
Reported-by: syzbot+dce04ed6d1438ad69656@syzkaller.appspotmail.com
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240427102808.29356-1-qiang.zhang1211@gmail.com
Link: https://lore.kernel.org/lkml/8f281a10-b85a-4586-9586-5bbc12dc784f@paulmck-laptop/T/#mea8aba4abfcb97bbf499d169ce7f30c4cff1b0e3
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix EEVDF corner cases
- Fix two nohz_full= related bugs that can cause boot crashes
and warnings
* tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU
sched/isolation: Prevent boot crash when the boot CPU is nohz_full
sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf()
sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr
sched/eevdf: Always update V if se->on_rq when reweighting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Make the CPU_MITIGATIONS=n interaction with conflicting
mitigation-enabling boot parameters a bit saner.
- Re-enable CPU mitigations by default on non-x86
- Fix TDX shared bit propagation on mprotect()
- Fix potential show_regs() system hang when PKE initialization
is not fully finished yet.
- Add the 0x10-0x1f model IDs to the Zen5 range
- Harden #VC instruction emulation some more
* tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Ignore "mitigations" kernel parameter if CPU_MITIGATIONS=n
cpu: Re-enable CPU mitigations by default for !X86 architectures
x86/tdx: Preserve shared bit on mprotect()
x86/cpu: Fix check for RDPKRU in __show_regs()
x86/CPU/AMD: Add models 0x10-0x1f to the Zen5 range
x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handler
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix a double free bug in the init error path of the GICv3 irqchip
driver"
* tag 'irq-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Prevent double free on error
|
|
When erofs_kill_sb() is called in block dev based mode, s_bdev may not
have been initialised yet, and if CONFIG_EROFS_FS_ONDEMAND is enabled,
it will be mistaken for fscache mode, and then attempt to free an anon_dev
that has never been allocated, triggering the following warning:
============================================
ida_free called for id=0 which is not allocated.
WARNING: CPU: 14 PID: 926 at lib/idr.c:525 ida_free+0x134/0x140
Modules linked in:
CPU: 14 PID: 926 Comm: mount Not tainted 6.9.0-rc3-dirty #630
RIP: 0010:ida_free+0x134/0x140
Call Trace:
<TASK>
erofs_kill_sb+0x81/0x90
deactivate_locked_super+0x35/0x80
get_tree_bdev+0x136/0x1e0
vfs_get_tree+0x2c/0xf0
do_new_mount+0x190/0x2f0
[...]
============================================
Now when erofs_kill_sb() is called, erofs_sb_info must have been
initialised, so use sbi->fsid to distinguish between the two modes.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240419123611.947084-3-libaokun1@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Instead of allocating the erofs_sb_info in fill_super() allocate it during
erofs_init_fs_context() and ensure that erofs can always have the info
available during erofs_kill_sb(). After this erofs_fs_context is no longer
needed, replace ctx with sbi, no functional changes.
Suggested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240419123611.947084-2-libaokun1@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
When prepare_ondemand_read failed, wrong error message is printed.
The prepare_read is also implemented in cachefiles, so we amend it.
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240424084247.759432-1-lihongbo22@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
We did not delay after the second strobe signal, so another immediately
following access could potentially corrupt the written value.
This is a purely speculative fix with no supporting evidence, but after
taking out the spinlocks around the writes, it seems plausible that a
modern processor could be actually too fast. Also, it's just cleaner to
be consistent.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-7-oswald.buddenhagen@gmx.de>
|
|
A side effect of making the dock monitoring interrupt-driven was that
we'd be very quick to program a freshly connected dock. However, for
unclear reasons, the dock does not work when we do that - despite the
FPGA netlist upload going just fine. We work around this by adding a
delay before programming the dock; for safety, the value is several
times as much as was determined empirically.
Note that a badly timed dock hot-plug would have triggered the problem
even before the referenced commit - but now it would happen 100% instead
of about 3% of the time, thus making it impossible to work around by
re-plugging.
Fixes: fbb64eedf5a3 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-6-oswald.buddenhagen@gmx.de>
|
|
The FPGA access through the GPIO port does not interfere with other
sound processor register access, so there is no need to subject it to
emu_lock. And after moving all FPGA access out of the interrupt handler,
it does not need to be IRQ-safe, either.
What's more, attaching the dock causes a firmware upload, which takes
several seconds. We really don't want to disable IRQs for this long, and
even less also have someone else spin with IRQs disabled waiting for us.
Therefore, use a mutex for FPGA access locking.
This makes the code somewhat more noisy, as we need to wrap bigger
sections into the mutex, as it needs to enclose the spinlocks.
The latter has the "side effect" of fixing dock FPGA programming in a
corner case: a really badly timed mixer access right between entering
FPGA programming mode and uploading the netlist would mess up the
protocol.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-5-oswald.buddenhagen@gmx.de>
|
|
The actual event processing was already done by workqueue items. We can
move the event dispatching there as well, rather than doing it already
in the interrupt handler callback.
This change has a rather profound "side effect" on the reliability of
the FPGA programming: once we enter programming mode, we must not issue
any snd_emu1010_fpga_{read,write}() calls until we're done, as these
would badly mess up the programming protocol. But exactly that would
happen when trying to program the dock, as that triggers GPIO interrupts
as a side effect. This is mitigated by deferring the actual interrupt
handling, as workqueue items are not re-entrant.
To avoid scheduling the dispatcher on non-events, we now explicitly
ignore GPIO IRQs triggered by "uninteresting" pins, which happens a lot
as a side effect of calling snd_emu1010_fpga_{read,write}().
Fixes: fbb64eedf5a3 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-4-oswald.buddenhagen@gmx.de>
|
|
Pulled out of the next patch to improve its legibility.
As the function is now available, call it directly from
snd_emu10k1_emu1010_init(), thus making the MicroDock firmware loading
synchronous - there isn't really a reason not to. Note that this does
not affect the AudioDocks of rev1 cards, as these have no independent
power supplies, and thus come up only a while after the main card is
initialized.
As a drive-by, adjust the priorities of two messages to better reflect
their impact.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-3-oswald.buddenhagen@gmx.de>
|
|
While there are two separate IRQ status bits for dock attach and detach,
the hardware appears to mix them up more or less randomly, making them
useless for tracking what actually happened. It is much safer to check
the dock status separately and proceed based on that, as the old polling
code did.
Note that the code assumes that only the dock can be hot-plugged - if
other option card bits changed, the logic would break.
Fixes: fbb64eedf5a3 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-2-oswald.buddenhagen@gmx.de>
|
|
housekeeping_setup() checks cpumask_intersects(present, online) to ensure
that the kernel will have at least one housekeeping CPU after smp_init(),
but this doesn't work if the maxcpus= kernel parameter limits the number of
processors available after bootup.
For example, a kernel with "maxcpus=2 nohz_full=0-2" parameters crashes at
boot time on a virtual machine with 4 CPUs.
Change housekeeping_setup() to use cpumask_first_and() and check that the
returned CPU number is valid and less than setup_max_cpus.
Another corner case is "nohz_full=0" on a machine with a single CPU or with
the maxcpus=1 kernel argument. In this case non_housekeeping_mask is empty
and tick_nohz_full_setup() makes no sense. And indeed, the kernel hits the
WARN_ON(tick_nohz_full_running) in tick_sched_do_timer().
And how should the kernel interpret the "nohz_full=" parameter? It should
be silently ignored, but currently cpulist_parse() happily returns the
empty cpumask and this leads to the same problem.
Change housekeeping_setup() to check cpumask_empty(non_housekeeping_mask)
and do nothing in this case.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240413141746.GA10008@redhat.com
|
|
Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:
08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full").
However after:
aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.
Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.
This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.
There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).
Fixes: aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com
Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/
|
|
Pull Rust fixes from Miguel Ojeda:
- Soundness: make internal functions generated by the 'module!' macro
inaccessible, do not implement 'Zeroable' for 'Infallible' and
require 'Send' for the 'Module' trait.
- Build: avoid errors with "empty" files and workaround 'rustdoc' ICE.
- Kconfig: depend on '!CFI_CLANG' and avoid selecting 'CONSTRUCTORS'.
- Code docs: remove non-existing key from 'module!' macro example.
- Docs: trivial rendering fix in arch table.
* tag 'rust-fixes-6.9' of https://github.com/Rust-for-Linux/linux:
rust: remove `params` from `module` macro example
kbuild: rust: force `alloc` extern to allow "empty" Rust files
kbuild: rust: remove unneeded `@rustc_cfg` to avoid ICE
rust: kernel: require `Send` for `Module` implementations
rust: phy: implement `Send` for `Registration`
rust: make mutually exclusive with CFI_CLANG
rust: macros: fix soundness issue in `module!` macro
rust: init: remove impl Zeroable for Infallible
docs: rust: fix improper rendering in Arch Support page
rust: don't select CONSTRUCTORS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
separation
- A fix to avoid loading rv64/NOMMU kernel past the start of RAM
- A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
overflow in the bitmask
- The sud_test kselftest has been fixed to properly swizzle the syscall
number into the return register, which are not the same on RISC-V
- A fix for a build warning in the perf tools on rv32
- A fix for the CBO selftests, to avoid non-constants leaking into the
inline asm
- A pair of fixes for T-Head PBMT errata probing, which has been
renamed MAE by the vendor
* tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2
perf riscv: Fix the warning due to the incompatible type
riscv: T-Head: Test availability bit before enabling MAE errata
riscv: thead: Rename T-Head PBMT to MAE
selftests: sud_test: return correct emulated syscall value on RISC-V
riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
|
|
Pull smb client fixes from Steve French:
"Three smb3 client fixes, all also for stable:
- two small locking fixes spotted by Coverity
- FILE_ALL_INFO and network_open_info packing fix"
* tag '6.9-rc5-cifs-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix lock ordering potential deadlock in cifs_sync_mid_result
smb3: missing lock when picking channel
smb: client: Fix struct_group() usage in __packed structs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Fix a race condition in the at24 eeprom handler, a NULL pointer
exception in the I2C core for controllers only using target modes,
drop a MAINTAINERS entry, and fix an incorrect DT binding for at24"
* tag 'i2c-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: fix NULL function pointer dereference
MAINTAINERS: Drop entry for PCA9541 bus master selector
eeprom: at24: fix memory corruption race condition
dt-bindings: eeprom: at24: Fix ST M24C64-D compatible schema
|
|
create_prof_cpu_mask() is no longer used after commit 1f44a225777e ("s390:
convert interrupt handling to use generic hardirq").
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Single AMD driver fix for wake interrupt handling in clockstop mode
* tag 'soundwire-6.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: fix for wake interrupt handling for clockstop mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- Revert pl330 issue_pending waits until WFP state due to regression
reported in Bluetooth loading
- Xilinx driver fixes for synchronization, buffer offsets, locking and
kdoc
- idxd fixes for spinlock and preventing the migration of the perf
context to an invalid target
- idma driver fix for interrupt handling when powered off
- Tegra driver residual calculation fix
- Owl driver register access fix
* tag 'dmaengine-fix-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: idxd: Fix oops during rmmod on single-CPU platforms
dmaengine: xilinx: xdma: Clarify kdoc in XDMA driver
dmaengine: xilinx: xdma: Fix synchronization issue
dmaengine: xilinx: xdma: Fix wrong offsets in the buffers addresses in dma descriptor
dma: xilinx_dpdma: Fix locking
dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue
idma64: Don't try to serve interrupts when device is powered off
dmaengine: tegra186: Fix residual calculation
dmaengine: owl: fix register access functions
dmaengine: Revert "dmaengine: pl330: issue_pending waits until WFP state"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- static checker (array size, bounds) fix for marvel driver
- Rockchip rk3588 pcie fixes for bifurcation and mux
- Qualcomm qmp-compbo fix for VCO, register base and regulator name for
m31 driver
- charger det crash fix for ti driver
* tag 'phy-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: ti: tusb1210: Resolve charger-det crash if charger psy is unregistered
phy: qcom: qmp-combo: fix VCO div offset on v5_5nm and v6
phy: phy-rockchip-samsung-hdptx: Select CONFIG_RATIONAL
phy: qcom: m31: match requested regulator name with dt schema
phy: qcom: qmp-combo: Fix register base for QSERDES_DP_PHY_MODE
phy: qcom: qmp-combo: Fix VCO div offset on v3
phy: rockchip: naneng-combphy: Fix mux on rk3588
phy: rockchip-snps-pcie3: fix clearing PHP_GRF_PCIESEL_CON bits
phy: rockchip-snps-pcie3: fix bifurcation on rk3588
phy: freescale: imx8m-pcie: fix pcie link-up instability
phy: marvell: a3700-comphy: Fix hardcoded array size
phy: marvell: a3700-comphy: Fix out of bounds read
|
|
Baruch reported an OOPS when using the designware controller as target
only. Target-only modes break the assumption of one transfer function
always being available. Fix this by always checking the pointer in
__i2c_transfer.
Reported-by: Baruch Siach <baruch@tkos.co.il>
Closes: https://lore.kernel.org/r/4269631780e5ba789cf1ae391eec1b959def7d99.1712761976.git.baruch@tkos.co.il
Fixes: 4b1acc43331d ("i2c: core changes for slave support")
[wsa: dropped the simplification in core-smbus to avoid theoretical regressions]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Baruch Siach <baruch@tkos.co.il>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-04-26
We've added 12 non-merge commits during the last 22 day(s) which contain
a total of 14 files changed, 168 insertions(+), 72 deletions(-).
The main changes are:
1) Fix BPF_PROBE_MEM in verifier and JIT to skip loads from vsyscall page,
from Puranjay Mohan.
2) Fix a crash in XDP with devmap broadcast redirect when the latter map
is in process of being torn down, from Toke Høiland-Jørgensen.
3) Fix arm64 and riscv64 BPF JITs to properly clear start time for BPF
program runtime stats, from Xu Kuohai.
4) Fix a sockmap KCSAN-reported data race in sk_psock_skb_ingress_enqueue,
from Jason Xing.
5) Fix BPF verifier error message in resolve_pseudo_ldimm64,
from Anton Protopopov.
6) Fix missing DEBUG_INFO_BTF_MODULES Kconfig menu item,
from Andrii Nakryiko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test PROBE_MEM of VSYSCALL_ADDR on x86-64
bpf, x86: Fix PROBE_MEM runtime load check
bpf: verifier: prevent userspace memory access
xdp: use flags field to disambiguate broadcast redirect
arm32, bpf: Reimplement sign-extension mov instruction
riscv, bpf: Fix incorrect runtime stats
bpf, arm64: Fix incorrect runtime stats
bpf: Fix a verifier verbose message
bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue
MAINTAINERS: bpf: Add Lehui and Puranjay as riscv64 reviewers
MAINTAINERS: Update email address for Puranjay Mohan
bpf, kconfig: Fix DEBUG_INFO_BTF_MODULES Kconfig definition
====================
Link: https://lore.kernel.org/r/20240426224248.26197-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a lot of minor DT fixes for Mediatek, Rockchip, Qualcomm and
Microchip and NXP, addressing both build-time warnings and bugs found
during runtime testing.
Most of these changes are machine specific fixups, but there are a few
notable regressions that affect an entire SoC:
- The Qualcomm MSI support that was improved for 6.9 ended up being
wrong on some chips and now gets fixed.
- The i.MX8MP camera interface broke due to a typo and gets updated
again.
The main driver fix is also for Qualcomm platforms, rewriting an
interface in the QSEECOM firmware support that could lead to crashing
the kernel from a trusted application.
The only other code changes are minor fixes for Mediatek SoC drivers"
* tag 'soc-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
ARM: dts: imx6ull-tarragon: fix USB over-current polarity
soc: mediatek: mtk-socinfo: depends on CONFIG_SOC_BUS
soc: mediatek: mtk-svs: Append "-thermal" to thermal zone names
arm64: dts: imx8mp: Fix assigned-clocks for second CSI2
ARM: dts: microchip: at91-sama7g54_curiosity: Replace regulator-suspend-voltage with the valid property
ARM: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with the valid property
arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
arm64: dts: qcom: sm8650: Fix the msi-map entries
arm64: dts: qcom: sm8550: Fix the msi-map entries
arm64: dts: qcom: sm8450: Fix the msi-map entries
arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states
arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs
arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro
dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2
arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
arm64: dts: rockchip: drop redundant pcie-reset-suspend in Scarlet Dumo
arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 8 are cc:stable and the remaining 3 (nice ratio!) address
post-6.8 issues or aren't considered suitable for backporting.
All except one of these are for MM. I see no particular theme - it's
singletons all over"
* tag 'mm-hotfixes-stable-2024-04-26-13-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio()
selftests: mm: protection_keys: save/restore nr_hugepages value from launch script
stackdepot: respect __GFP_NOLOCKDEP allocation flag
hugetlb: check for anon_vma prior to folio allocation
mm: zswap: fix shrinker NULL crash with cgroup_disable=memory
mm: turn folio_test_hugetlb into a PageType
mm: support page_mapcount() on page_has_type() pages
mm: create FOLIO_FLAG_FALSE and FOLIO_TYPE_OPS macros
mm/hugetlb: fix missing hugetlb_lock for resv uncharge
selftests: mm: fix unused and uninitialized variable warning
selftests/harness: remove use of LINE_MAX
|
