aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/rtc/rtc-mc13xxx.c
AgeCommit message (Collapse)AuthorFilesLines
2023-03-17rtc: mc13xxx: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230304133028.2135435-17-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-11-19rtc: rework rtc_register_device() resource managementBartosz Golaszewski1-1/+1
rtc_register_device() is a managed interface but it doesn't use devres by itself - instead it marks an rtc_device as "registered" and the devres callback for devm_rtc_allocate_device() takes care of resource release. This doesn't correspond with the design behind devres where managed structures should not be aware of being managed. The correct solution here is to register a separate devres callback for unregistering the device. While at it: rename rtc_register_device() to devm_rtc_register_device() and add it to the list of managed interfaces in devres.rst. This way we can avoid any potential confusion of driver developers who may expect there to exist a corresponding unregister function. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201109163409.24301-8-brgl@bgdev.pl
2020-05-11rtc: mc13xxx: fix a double-unlock issueQiushi Wu1-1/+3
In function mc13xxx_rtc_probe, the mc13xxx_unlock() is called before rtc_register_device(). But in the error path of rtc_register_device(), the mc13xxx_unlock() is called again, which causes a double-unlock problem. Thus add a call of the function “mc13xxx_lock” in an if branch for the completion of the exception handling. Fixes: e4ae7023e182a ("rtc: mc13xxx: set range") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Link: https://lore.kernel.org/r/20200503182235.1652-1-wu000273@umn.edu Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-16rtc: mc13xxx: fix style issueAlexandre Belloni1-1/+1
Use unsigned int instead of unsigned. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-16rtc: mc13xxx: convert to SPDX identifierAlexandre Belloni1-4/+1
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-16rtc: mc13xxx: use .set_timeAlexandre Belloni1-3/+3
Use .set_time instead of the deprecated .set_mmss64. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-16rtc: mc13xxx: set rangeAlexandre Belloni1-2/+10
All supported PMICs have a 15 bits days counter and hours, minutes, seconds Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap1-0/+1
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-01rtc: stop validating rtc_time after rtc_time64_to_tmAlexandre Belloni1-1/+1
rtc_time64_to_tm never generates an invalid tm. It is not necessary to validate it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2016-05-20rtc: mc13xxx: remove UIE signalingWolfram Sang1-19/+0
The RTC core handles it since 6610e08 (RTC: Rework RTC code to use timerqueue for events). So far, only the callbacks to the RTC core have been removed, but not the handlers. Do this now. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-25rtc: mc13xxx: fix obfuscated and wrong format stringRasmus Villemoes1-1/+1
According to C99, %2.s means 'print two spaces' (a precision of . without following digits or * means 0). The kernel's printf implementation, however, treats that case as if no precision was given, but relying on that quirk is rather silly. Also, since no - (aka left-justify) flag is given, the field with of 2 would then cause the alarm->enabled case to come out as "o n". Deobfuscate it. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-04-03drivers/rtc/mc13xxx: Update driver to address y2038/y2106 issuesXunlei Pang1-18/+14
This driver has a number of y2038/y2106 issues. This patch resolves them by: - Replacing rtc_time_to_tm() with rtc_time64_to_tm() - Changing mc13xxx_rtc_set_mmss() to use rtc_class_ops's set_mmss64() After this patch, the driver should not have any remaining y2038/y2106 issues. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-11-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-20rtc: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-04-03drivers/rtc/rtc-mc13xxx.c: fix potential race conditionAlexander Shiyan1-17/+13
RTC drivers must not return an error after device registration. This patch makes RTC registration as the last action. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03rtc: mc13xxx: make rtc_read_time() more readableAlexander Shiyan1-36/+23
Remove unnecessary locks when reading the time and make the read operation until the values of day matched between reading the seconds, it will make the mc13xxx_rtc_read_time() procedure more readable. Additionally, patch introduced a "seconds in a day" definition. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03rtc: mc13xxx: change RTC validation schemeAlexander Shiyan1-18/+14
Datasheet says: "When the VSRTC voltage drops to the range of 0.9 - 0.8V, the RTCPORB reset signal is generated and the contents of the RTC will be reset. <skip>. To inform the processor that the contents of the RTC are no longer valid due to the reset, a timer reset interrupt function is implemented with the RTCRSTI bit." This patch makes the RTC valid by default until RTCRST interrupt occurs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03rtc: mc13xxx: fix 1Hz interruptAlexander Shiyan1-1/+1
1Hz interrupt is never unmasked, so no interrupts appears. This patch fix this issue. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03rtc: mc13xxx: simplify alarm_irq_enable()Alexander Shiyan1-9/+3
This patch removes excess layer for alarm_irq_enable() function. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03rtc: mc13xxx: request IRQs after RTC registrationAlexander Shiyan1-21/+11
Interrupts can appear after request_irq and interrupt handlers can use the RTC device, but currently we register RTC after IRQs. This patch changes this order and simplify error path a bit. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03rtc: mc13xxx: remove __exit_p()Alexander Shiyan1-2/+2
Since we no longer allow building without hotplug, the mc13xxx_rtc_remove() function is always present and we should not use __exit_p() to refer to it. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rtc: rtc-mc13xxx: remove unnecessary platform_set_drvdata()Jingoo Han1-4/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063100 ("device-core: Ensure drvdata = NULL when no driver is bound"). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29rtc: rtc-mc13xxx: use devm_*() functionsJingoo Han1-8/+3
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29rtc: rtc-mc13xxx: use module_platform_driver_probe()Jingoo Han1-11/+1
Use module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30rtc/mc13xxx: add support for the rtc in the mc34708 pmicUwe Kleine-König1-0/+2
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30rtc/mc13xxx: use MODULE_DEVICE_TABLE instead of MODULE_ALIASUwe Kleine-König1-2/+2
This allows automatic driver loading for all supported device types. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10drivers/rtc/rtc-mc13xxx.c: make mc13xxx_rtc_idtable staticAxel Lin1-1/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02drivers/rtc/rtc-mc13xxx.c: move probe and remove callbacks to .init.text and ↵Uwe Kleine-König1-3/+3
.exit.text The driver is added using platform_driver_probe(), so the callbacks can be discarded more aggessively. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-06rtc: mc13xxx: Don't call rtc_device_register while holding lockUwe Kleine-König1-2/+6
Since commit f44f7f9 (RTC: Initialize kernel state from RTC) rtc_device_register reads the programmed alarm. As reading the alarm needs to take the mc13xxx lock, release it before calling rtc_device_register. This fixes a deadlock during boot: INFO: task swapper:1 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. swapper D c02b175c 0 1 0 0x00000000 [<c02b175c>] (schedule+0x304/0x4f4) from [<c02b25a8>] (__mutex_lock_slowpath+0x7c/0x110) [<c02b25a8>] (__mutex_lock_slowpath+0x7c/0x110) from [<c020b4cc>] (mc13xxx_rtc_read_time+0x1c/0x118) [<c020b4cc>] (mc13xxx_rtc_read_time+0x1c/0x118) from [<c0208f04>] (__rtc_read_time+0x58/0x5c) [<c0208f04>] (__rtc_read_time+0x58/0x5c) from [<c0209508>] (rtc_read_time+0x30/0x48) [<c0209508>] (rtc_read_time+0x30/0x48) from [<c0209dd4>] (__rtc_read_alarm+0x1c/0x290) [<c0209dd4>] (__rtc_read_alarm+0x1c/0x290) from [<c0208d58>] (rtc_device_register+0x150/0x27c) [<c0208d58>] (rtc_device_register+0x150/0x27c) from [<c02b0b74>] (mc13xxx_rtc_probe+0x128/0x17c) [<c02b0b74>] (mc13xxx_rtc_probe+0x128/0x17c) from [<c01d5280>] (platform_drv_probe+0x1c/0x24) [<c01d5280>] (platform_drv_probe+0x1c/0x24) from [<c01d3e58>] (driver_probe_device+0x80/0x1a8) [<c01d3e58>] (driver_probe_device+0x80/0x1a8) from [<c01d400c>] (__driver_attach+0x8c/0x90) [<c01d400c>] (__driver_attach+0x8c/0x90) from [<c01d3654>] (bus_for_each_dev+0x60/0x8c) [<c01d3654>] (bus_for_each_dev+0x60/0x8c) from [<c01d2f6c>] (bus_add_driver+0x180/0x248) [<c01d2f6c>] (bus_add_driver+0x180/0x248) from [<c01d4664>] (driver_register+0x70/0x15c) [<c01d4664>] (driver_register+0x70/0x15c) from [<c01d5700>] (platform_driver_probe+0x18/0x98) [<c01d5700>] (platform_driver_probe+0x18/0x98) from [<c00273a8>] (do_one_initcall+0x2c/0x168) [<c00273a8>] (do_one_initcall+0x2c/0x168) from [<c00083ac>] (kernel_init+0xa0/0x150) [<c00083ac>] (kernel_init+0xa0/0x150) from [<c0033ff8>] (kernel_thread_exit+0x0/0x8) Reported-by: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Closes: http://bugs.debian.org/625804 [Tweaked commit log -jstultz] Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-04-14drivers/rtc/rtc-mc13xxx.c: fix unterminated platform_device_id tableAxel Lin1-0/+1
The platform_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-09RTC: Cleanup rtc_class_ops->update_irq_enable()John Stultz1-7/+0
Now that the generic code handles UIE mode irqs via periodic alarm interrupts, no one calls the rtc_class_ops->update_irq_enable() method anymore. This patch removes the driver hooks and implementations of update_irq_enable if no one else is calling it. CC: Thomas Gleixner <tglx@linutronix.de> CC: Alessandro Zummo <a.zummo@towertech.it> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> CC: rtc-linux@googlegroups.com Signed-off-by: John Stultz <john.stultz@linaro.org>
2010-10-29rtc: Add support for the rtc found in the MC13892 PMICUwe Kleine-König1-0/+437
The mfd driver for MC13783 recently got support for MC13892 and was renamed accordingly from mc13783-core to mc13xxx-core. Do the same for rtc-mc13783. The only relevant change is to use platform id's to tell the platform bus that this driver is responsible for mc13892-rtc devices, too. Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-19 07:51:38 +0000