aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/rtc/rtc-at91rm9200.c
AgeCommit message (Collapse)AuthorFilesLines
2023-10-16rtc: at91rm9200: annotate at91_rtc_remove with __exit againAlexandre Belloni1-1/+1
Having the driver as a builtin after dropping the __exit annotation results in: >> drivers/rtc/rtc-at91rm9200.c:561:13: warning: 'at91_rtc_remove' defined but not used [-Wunused-function] 561 | static void at91_rtc_remove(struct platform_device *pdev) | ^~~~~~~~~~~~~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310160705.vlElNOGb-lkp@intel.com/ Link: https://lore.kernel.org/r/20231016041816.246426-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-13rtc: at91rm9200: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231002080529.2535610-9-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-13rtc: at91rm9200: Mark driver struct with __refdata to prevent section ↵Uwe Kleine-König1-1/+7
mismatch warning As described in the added code comment, a reference to .exit.text is ok for drivers registered via module_platform_driver_probe(). Make this explicit to prevent a section mismatch warning. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231002080529.2535610-3-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-08-10rtc: remove redundant of_match_ptr()Zhu Wang1-1/+1
Signed-off-by: Zhu Wang <wangzhu9@huawei.com> Link: https://lore.kernel.org/r/20230808115213.154377-2-wangzhu9@huawei.com Link: https://lore.kernel.org/r/20230808115213.154377-3-wangzhu9@huawei.com Link: https://lore.kernel.org/r/20230808115213.154377-4-wangzhu9@huawei.com Link: https://lore.kernel.org/r/20230808115213.154377-5-wangzhu9@huawei.com Link: https://lore.kernel.org/r/20230808115213.154377-6-wangzhu9@huawei.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-07-27rtc: Explicitly include correct DT includesRob Herring1-1/+0
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230724205456.767430-1-robh@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-12-15rtc: at91rm9200: Fix syntax errors in commentsXiang wangx1-1/+1
Delete the redundant word 'is'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20220605083515.9514-1-wangxiang@cdjrlc.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-11-19rtc: rework rtc_register_device() resource managementBartosz Golaszewski1-1/+1
rtc_register_device() is a managed interface but it doesn't use devres by itself - instead it marks an rtc_device as "registered" and the devres callback for devm_rtc_allocate_device() takes care of resource release. This doesn't correspond with the design behind devres where managed structures should not be aware of being managed. The correct solution here is to register a separate devres callback for unregistering the device. While at it: rename rtc_register_device() to devm_rtc_register_device() and add it to the list of managed interfaces in devres.rst. This way we can avoid any potential confusion of driver developers who may expect there to exist a corresponding unregister function. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201109163409.24301-8-brgl@bgdev.pl
2020-11-17rtc: at91rm9200: Add sam9x60 compatibleAlexandre Belloni1-0/+3
Handle the sam9x60 RTC. While it can work with the at91sam9x5 fallback, it has crystal correction support and doesn't need to shadow IMR. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20201117133920.1229679-1-alexandre.belloni@bootlin.com
2020-11-17rtc: at91rm9200: add correction supportAlexandre Belloni1-4/+99
The sama5d4 and sama5d2 RTCs are able to correct for imprecise crystals, up to 1953 ppm. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20201108232001.1580128-1-alexandre.belloni@bootlin.com
2020-01-15rtc: at91rm9200: use FIELD_PREP/FIELD_GETAlexandre Belloni1-20/+22
Use FIELD_PREP and FIELD_GET instead of hardcoding already defined values. Link: https://lore.kernel.org/r/20191229204421.337612-6-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-15rtc: at91rm9200: avoid time readout in at91_rtc_setalarmAlexandre Belloni1-14/+6
The current rtc time is read out in at91_rtc_setalarm but it it immediately overwritten by the alarm time. Remove the readout. Link: https://lore.kernel.org/r/20191229204421.337612-5-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-15rtc: at91rm9200: move register definitions to C fileAlexandre Belloni1-1/+45
The header was simply moved from the arm mach folder to drivers/rtc but there is not point in having it separated from the driver. Also remove unused bit definitions and use BIT and GENMASK. Link: https://lore.kernel.org/r/20191229204421.337612-4-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-15rtc: at91rm9200: add sama5d4 and sama5d2 compatiblesAlexandre Belloni1-0/+6
Both the sama5d4 and sama5d2 RTCs have more features than the previous RTCs, add a compatible string for them. Link: https://lore.kernel.org/r/20191229204421.337612-3-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-15rtc: at91rm9200: remove procfs informationAlexandre Belloni1-15/+0
The RTC procfs interface is deprecated and hasn't been used by userspace for years. Link: https://lore.kernel.org/r/20191229204421.337612-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-10-03rtc: at91rm9200: use of_device_get_match_data()Claudiu Beznea1-18/+1
Use of_device_get_match_data() since all platforms should now use DT bindings. AVR32 architecture has been removed in commit 26202873bb51 ("avr32: remove support for AVR32 architecture"). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1569500132-21164-1-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-13rtc: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-3/+1
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-rtc@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-40-swboyd@chromium.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-6/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-10rtc: at91rm9200: Switch to use %ptRAndy Shevchenko1-11/+4
Use %ptR instead of open coded variant to print content of struct rtc_time in human readable format. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-17rtc: at91rm9200: add rangeAlexandre Belloni1-0/+2
The at91rm9200 RTC can support dates from 1900-01-01 00:00:00 to 2099-12-31 23:59:59. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2017-11-10rtc: at91rm9200: fix reading alarm valueAlexandre Belloni1-12/+6
When alarm value is read at boot time, at91_alarm_year is not yet set to the proper value so the year is always set to 1900. This results in that kind of message at boot: rtc rtc0: invalid alarm value: 1900-1-14 2:11:39 There is no way to recover from that as the alarm is now only read when booting. Instead, rely on the rtc core to figure out the proper year. Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-10rtc: at91rm9200: stop calculating yday in at91_rtc_readalarmAlexandre Belloni1-1/+0
Calculating yday in the read_alarm callback is useless as this value is never used later. Also, it was buggy anyway because at the time this is done, tm_year is always 0 as the alarm register doesn't hold the year. Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: at91rm9200: remove race conditionAlexandre Belloni1-6/+8
While highly unlikely, it is possible to get an interrupt as soon as it is requested. In that case, at91_rtc_interrupt() will be called with rtc == NULL. Solve that by using devm_rtc_allocate_device/rtc_register_device. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-11-08rtc: at91rm9200: clear RTC alarm status flag prior to suspendingWenyou Yang1-0/+2
As said in the SAMA5D2 datasheet, "Prior to instructing the device to enter ULP mode 1, ... and the internal sources of wake-up must be cleared." This patch is to clear the RTC alarm status flag prior to suspending to avoid the erroneous wake-up activity, as it is often used as the wake-up source for the ULP mode 1. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05rtc: at91rm9200: get and use slow clockAlexandre Belloni1-3/+24
Commit dca1a4b5ff6e ("clk: at91: keep slow clk enabled to prevent system hang") added a workaround for the slow clock as it is not properly handled by its users. Get and use the slow clock as it is necessary for the at91rm9200 rtc. Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05rtc: at91rm9200: sort headers alphabeticallyAlexandre Belloni1-8/+8
Sort included headers alphabetically. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-17drivers/rtc/rtc-at91rm9200.c: make IO endian agnosticBen Dooks1-2/+2
Change the __raw IO calls to readl/write_relaxed which makes the driver endian agnostic to run properly on big endian systems. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Andrew Victor <linux@maxim.org.za> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-18rtc: at91rm9200: double locking bug in at91_rtc_interrupt()Dan Carpenter1-1/+1
There is a typo here so we deadlock. Fixes: dd1f1f391dd7 ('rtc: at91rm9200: rework wakeup and interrupt handling') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: David Dueck <davidcdueck@googlemail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-04rtc: at91rm9200: rework wakeup and interrupt handlingBoris BREZILLON1-14/+48
The IRQ line used by the RTC device is usually shared with the system timer (PIT) on at91 platforms. Since timers are registering their handlers with IRQF_NO_SUSPEND, we should expect being called in suspended state, and properly wake the system up when this is the case. Set IRQF_COND_SUSPEND flag when registering the IRQ handler to inform irq core that it can safely be called while the system is suspended. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-20rtc: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-06rtc: rtc-at91rm9200: fix infinite wait for ACKUPD irqBoris BREZILLON1-2/+14
The rtc user must wait at least 1 sec between each time/calandar update (see atmel's datasheet chapter "Updating Time/Calendar"). Use the 1Hz interrupt to update the at91_rtc_upd_rdy flag and wait for the at91_rtc_wait_upd_rdy event if the rtc is not ready. This patch fixes a deadlock in an uninterruptible wait when the RTC is updated more than once every second. AFAICT the bug is here from the beginning, but I think we should at least backport this fix to 3.10 and the following longterm and stable releases. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Reported-by: Bryan Evenson <bevenson@melinkcorp.com> Tested-by: Bryan Evenson <bevenson@melinkcorp.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-12drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrapLinus Pizunski1-0/+2
Update month and day of month to the alarm month/day instead of current day/month when setting the RTC alarm mask. Signed-off-by: Linus Pizunski <linus@narrativeteam.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-21ARM: drivers/rtc/rtc-at91rm9200.c: disable interrupts at shutdownJohan Hovold1-0/+9
Make sure RTC-interrupts are disabled at shutdown. As the RTC is generally powered by backup power (VDDBU), its interrupts are not disabled on wake-up, user, watchdog or software reset. This could cause troubles on other systems (e.g. older kernels) if an interrupt occurs before a handler has been installed at next boot. Let us be well-behaved and disable them on clean shutdowns at least (as do the RTT-based rtc-at91sam9 driver). Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13drivers/rtc/rtc-at91rm9200.c: use devm_* APIsSachin Kamat1-21/+7
devm_* APIs are device managed and make code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rtc: rtc-at91rm9200: remove unnecessary platform_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063100 ("device-core: Ensure drvdata = NULL when no driver is bound"). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/rtc/rtc-at91rm9200.c: include <linux/uaccess.h>Sachin Kamat1-2/+1
Silences the following checkpatch warning: WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12rtc-at91rm9200: use shadow IMR on at91sam9x5Johan Hovold1-0/+7
Add support for the at91sam9x5-family which must use the shadow interrupt mask due to a hardware issue (causing RTC_IMR to always be zero). Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Robert Nelson <Robert.Nelson@digikey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12rtc-at91rm9200: add shadow interrupt maskJohan Hovold1-1/+38
Add shadow interrupt-mask register which can be used on SoCs where the actual hardware register is broken. Note that some care needs to be taken to make sure the shadow mask corresponds to the actual hardware state. The added overhead is not an issue for the non-broken SoCs due to the relatively infrequent interrupt-mask updates. We do, however, only use the shadow mask value as a fall-back when it actually needed as there is still a theoretical possibility that the mask is incorrect (see the code for details). Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Robert Nelson <Robert.Nelson@digikey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12rtc-at91rm9200: refactor interrupt-register handlingJohan Hovold1-14/+29
Add accessors for the interrupt register. This will allow us to easily add a shadow interrupt-mask register to use on SoCs where the interrupt-mask register cannot be used. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Robert Nelson <Robert.Nelson@digikey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12rtc-at91rm9200: add configuration supportJohan Hovold1-8/+38
Add configuration support which can be used to implement SoC-specific workarounds for broken hardware. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Robert Nelson <Robert.Nelson@digikey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12rtc-at91rm9200: add match-table compile guardJohan Hovold1-0/+2
The members of Atmel's at91sam9x5 family (9x5) have a broken RTC interrupt mask register (AT91_RTC_IMR). It does not reflect enabled interrupts but instead always returns zero. The kernel's rtc-at91rm9200 driver handles the RTC for the 9x5 family. Currently when the date/time is set, an interrupt is generated and this driver neglects to handle the interrupt. The kernel complains about the un-handled interrupt and disables it henceforth. This not only breaks the RTC function, but since that interrupt is shared (Atmel's SYS interrupt) then other things break as well (e.g. the debug port no longer accepts characters). Tested on the at91sam9g25. Bug confirmed by Atmel. This patch (of 5): Add missing match-table compile guard. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Robert Nelson <Robert.Nelson@digikey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/rtc/rtc-at91rm9200.c: fix missing iounmapJohan Hovold1-3/+11
Add missing iounmap to probe error path and remove. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/rtc/rtc-at91rm9200.c: add DT supportJoachim Eastwood1-0/+9
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29rtc: rtc-at91rm9200: switch to using SIMPLE_DEV_PM_OPSJingoo Han1-12/+4
Switch to using the SIMPLE_DEV_PM_OPS macro to declare the driver's pm_ops. It reduces code size. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29rtc: rtc-at91rm9200: use module_platform_driver_probe()Jingoo Han1-12/+1
Use module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-05Revert "drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR"Johan Hovold1-31/+19
This reverts commit 0ef1594c017521ea89278e80fe3f80dafb17abde. This patch introduced a few races which cannot be easily fixed with a small follow-up patch. Furthermore, the SoC with the broken hardware register, which this patch intended to add support for, can only be used with device trees, which this driver currently does not support. [ Here is the discussion that led to this "revert" patch: https://lkml.org/lkml/2013/4/3/176 ] Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-22drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMRNicolas Ferre1-19/+31
On some revisions of AT91 SoCs, the RTC IMR register is not working. Instead of elaborating a workaround for that specific SoC or IP version, we simply use a software variable to store the Interrupt Mask Register and modify it for each enabling/disabling of an interrupt. The overhead of this is negligible anyway. The interrupt mask register (IMR) for the RTC is broken on the AT91SAM9x5 sub-family of SoCs (good overview of the members here: http://www.eewiki.net/display/linuxonarm/AT91SAM9x5 ). The "user visible effect" is the RTC doesn't work. That sub-family is less than two years old and only has devicetree (DT) support and came online circa lk 3.7 . The dust is yet to settle on the DT stuff at least for AT91 SoCs (translation: lots of stuff is still broken, so much that it is hard to know where to start). The fix in the patch is pretty simple: just shadow the silicon IMR register with a variable in the driver. Some older SoCs (pre-DT) use the the rtc-at91rm9200 driver (e.g. obviously the AT91RM9200) and they should not be impacted by the change. There shouldn't be a large volume of interrupts associated with a RTC. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug()Jingoo Han1-9/+8
Fix the checkpatch warning as below: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-06arm: at91: move at91rm9200 rtc header in drivers/rtcJean-Christophe PLAGNIOL-VILLARD1-1/+1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-07-04ARM: at91: fix new build errorsArnd Bergmann1-0/+1
MULTI_IRQ_HANDLER and SPARSE_IRQ are now required everywhere because mach/irqs.h and mach/entry-macros.S are gone but the symbols are only selected for AT91SAM9, not for the NOMMU parts. A few files now need to include linux/io.h directly, which used to be included through other headers that have changed. The new at91_aic_irq_priorities variable is only used with CONFIG_OF enabled and should not be visible otherwise. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-28ARM: at91: make rm9200 rtc drivers soc independentJean-Christophe PLAGNIOL-VILLARD1-38/+63
switch the rtc drivers to resource and pass it via platform_device Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-09RTC: Clean out UIE icotl implementationsJohn Stultz1-28/+0
With the generic RTC rework, the UIE mode irqs are handled in the generic layer, and only hardware specific ioctls get passed down to the rtc driver layer. So this patch removes the UIE mode ioctl handling in the rtc driver layer, which never get used. CC: Thomas Gleixner <tglx@linutronix.de> CC: Alessandro Zummo <a.zummo@towertech.it> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> CC: rtc-linux@googlegroups.com Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-03RTC: Convert rtc drivers to use the alarm_irq_enable methodJohn Stultz1-7/+13
Some rtc drivers use the ioctl method instead of the alarm_irq_enable method for enabling alarm interupts. With the new virtualized RTC rework, its important for drivers to use the alarm_irq_enable instead. This patch converts the drivers that use the AIE ioctl method to use the alarm_irq_enable method. Other ioctl cmds are left untouched. I have not been able to test or even compile most of these drivers. Any help to make sure this change is correct would be appreciated! CC: Alessandro Zummo <a.zummo@towertech.it> CC: Thomas Gleixner <tglx@linutronix.de> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Reported-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Tested-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: John Stultz <john.stultz@linaro.org>
2009-09-23rtc: at91rm9200 fixesDavid Brownell1-9/+15
Fix two new-ish runtime warnings in the at91rm9200 (etc) RTC: Platform driver 'at91_rtc' needs updating - please use dev_pm_ops ... by just switching IRQ 1/at91_rtc: IRQF_DISABLED is not guaranteed on shared IRQs ... no longer needed now that rtc_update_irq() changed Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20drivers/rtc/: use bcd2bin/bin2bcdAdrian Bunk1-21/+21
Change drivers/rtc/ to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16rtc-at91rm9200: remove now-unneeded codeAndrew Victor1-3/+1
The non-functional periodic IRQ support was previously removed from the AT91RM9200 RTC driver. Remove the remaining AT91_RTC_FREQ definition. Signed-off-by: Andrew Victor <linux@maxim.org.za> Cc: David Brownell: <david-b@pacbell.net> Cc: Alessandro Zummo: <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King1-1/+1
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-24rtc-at91rm9200: avoid spurious irqsDavid Brownell1-10/+6
This fixes kernel http://bugzilla.kernel.org/show_bug.cgi?id=11112 (bogus RTC update IRQs reported) for rtc-at91rm9200 by scrubbing old IRQ status before enabling IRQs. It also removes nonfunctional periodic IRQ support from this driver; only update IRQs are reported, or provided by the hardware. I suspect some other RTCs probably have versions of #11112; it's easy to overlook, since most non-RTC drivers don't care about spurious IRQs: they're not reported to userspace. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Report-by: W Unruh <unruh@physics.ubc.ca> Cc: Andrew Victor <avictor.za@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-22[RTC] remove unused asm/rtc.h includes from ARM RTC driversRussell King1-2/+0
On ARM, asm/rtc.h only contains definitions for the predecessor to the RTC class support. RTC class drivers should not be including this include. Build tested on at91sam9rl and s3c2410 configurations. Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22[RTC] remove references to asm/mach/time.hRussell King1-2/+0
asm/mach/time.h is the ARM header file for setting up kernel ticker timekeeping (be that the old jiffy interrupt or the new clocksource.) RTC drivers have no business using this header file, and in fact do not require it. Build tested on at91sam9rl, omap and s3c2410 configurations. Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-28rtc: replace remaining __FUNCTION__ occurrencesHarvey Harrison1-6/+6
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-11rtc: fix platform driver hotplug/coldplugKay Sievers1-0/+1
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable RTC platform drivers, to re-enable module auto loading. [dbrownell@users.sourceforge.net: more drivers, minor fix] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rtc: suspend()/resume() restores system clockDavid Brownell1-30/+0
RTC class suspend/resume support, re-initializing the system clock on resume from the clock used to initialize it at boot time. - The reinit-on-resume is hooked to the existing RTC_HCTOSYS config option, on the grounds that a clock good enough for init must also be good enough for re-init. - Inlining a version of the code used by ARM, to save and restore the delta between a selected RTC and the current system wall-clock time. - Removes calls to that ARM code from AT91, OMAP1, and S3C RTCs. This means that systems using those RTCs across suspend/resume will likely want to change their kernel configs to enable RTC_HCTOSYS. If HCTOSYS isn't using a second RTC (with battery?), this changes the system's initial date from Jan 1970 to the epoch this hardware uses: 1998 for AT91, 2000 for OMAP1 (assuming no split power mode), etc. This goes on top of the patch series removing "struct class_device" usage from the RTC framework. That's all needed for class suspend()/resume(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-By: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08rtc: rtc interfaces don't use class_deviceDavid Brownell1-1/+1
This patch removes class_device from the programming interface that the RTC framework exposes to the rest of the kernel. Now an rtc_device is passed, which is more type-safe and streamlines all the relevant code. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-By: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] at91_rtc updatesDavid Brownell1-6/+13
Various bug fixes to the at91rm9200 RTC: - alarm: setalarm() should pay attention to the "enabled" flag - init: cleaner handling of the wakeup flags, which cpu init should really have set up. Doing it here is just a workaround. - linkage: since the at91_rtc driver probe() routine is in the init section, it should use platform_driver_probe() instead of leaving that pointer around in the driver struct after init section removal. - linkage: likewise, remove() belongs in the exit section. Among other things, the init and alarm changes ensure that this driver handles the new sysfs "wakealarm" attribute properly. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-05[PATCH] rtc-at91rm9200 build fixDavid Brownell1-0/+2
The at91rm9200 RTC driver needs some assistance to build, because of recent header file rearrangement. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Cc: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13[PATCH] rtc framewok: rtc_wkalrm.enabled reporting updatesDavid Brownell1-2/+3
Fix a glitch in the procfs dumping of whether the alarm IRQ is enabled: use the traditional name (from drivers/char/rtc.c and many other places) of "alarm_IRQ", not "alrm_wakeup" (which didn't even match the efirtc code, which originated that reporting API). Also, update a few of the RTC drivers to stop providing that duplicate status, and/or to expose it properly when reporting the alarm state. We really don't want every RTC driver doing their own thing here... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10[PATCH] AT91RM9200 RTCAndrew Victor1-0/+429
The new Atmel AT91SAM9261 and AT91SAM9260 processors do not have the internal RTC peripheral. This RTC driver is therefore AT91RM9200-specific. This patch renames rtc-at91.c to rtc-at91rm9200.c, and changes the name of the configuration option. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-19 06:45:02 +0000