| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When calculating the pfn for the iitlbt/idtlbt instruction, do not
drop the upper 5 address bits. This doesn't seem to have an effect
on physical hardware which uses less physical address bits, but in
qemu the missing bits are visible.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
|
|
An excerpt from the PA8800 ERS states:
* The PA8800 violates the seven instruction pipeline rule when performing
TLB inserts or PxTLBE instructions with the PSW C bit on. The instruction
will take effect by the 12th instruction after the insert or purge.
I believe we have a problem with handling TLB misses. We don't fill
the pipeline following TLB inserts. As a result, we likely fault again
after returning from the interruption.
The above statement indicates that we need at least seven instructions
after the insert on pre PA8800 processors and we need 12 instructions
on PA8800/PA8900 processors.
Here we add macros and code to provide the required number instructions
after a TLB insert.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Suggested-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
For the TLB_PTLOCK checks we used an optimization to store the spc
register into the spinlock to unlock it. This optimization works as
long as the lightweight spinlock checks (CONFIG_LIGHTWEIGHT_SPINLOCK_CHECK)
aren't enabled, because they really check if the lock word is zero or
__ARCH_SPIN_LOCK_UNLOCKED_VAL and abort with a kernel crash
("Spinlock was trashed") otherwise.
Drop that optimization to make it possible to activate both checks
at the same time.
Noticed-by: Sam James <sam@gentoo.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Sam James <sam@gentoo.org>
Cc: stable@vger.kernel.org # v6.4+
Fixes: 15e64ef6520e ("parisc: Add lightweight spinlock checks")
|
|
Commit df24e1783e6e ("parisc: Add vDSO support") introduced the vDSO
support, for which a _PAGE_SPECIAL page table flag was needed. Since we
wanted to keep every page table entry in 32-bits, this patch re-used the
existing - but yet unused - _PAGE_DMB flag (which triggers a hardware break
if a page is accessed) to store the special bit.
But when graphics card memory is mmapped into userspace, the kernel uses
vm_iomap_memory() which sets the the special flag. So, with the DMB bit
set, every access to the graphics memory now triggered a hardware
exception and segfaulted the userspace program.
Fix this breakage by dropping the DMB bit when writing the page
protection bits to the CPU TLB.
In addition this patch adds a small optimization: if huge pages aren't
configured (which is at least the case for 32-bit kernels), then the
special bit is stored in the hpage (HUGE PAGE) bit instead. That way we
can skip to reset the DMB bit.
Fixes: df24e1783e6e ("parisc: Add vDSO support")
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Instead of converting the physical address of the tmpalias mapping to
the tlb insert format inside all the various tmpalias functions, move
this conversion over to the DTLB miss handler. The physical address is
already in %r26 (or will be calculated into %r23), so there are no
additional steps needed in the functions themselves.
Additionally use the dep_safe() and depi_safe() macros to avoid
differentiating between 32- and 64-bit builds and as such make the code
much more readable.
The check if "ldil L%(TMPALIAS_MAP_START)" will sign extend into the
upper 32 bits can be dropped, because we added a compile time check in
an earlier patch.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Remove the hardcoded bit definitions in the tmpalias assembly code.
This makes it easy to change the size of the tmpalias region.
The alignment of the tmpalias region is reduced from 16 MB to 8 MB.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
With the latest cache fix for non-access faults and the support for
non-access faults (code 17) in handle_interruption, we can remove
the fast path emulation for fdc, fic, pdc, lpa, probe and probei
instructions.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Convert the PTE lookup functions to use the safer extru_safe macro.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
commit 8779e05ba8aa ("parisc: Fix ptrace check on syscall return")
fixed testing of TI_FLAGS. This uncovered a bug in the test mask.
syscall_restore_rfi is only used when the kernel needs to exit to
usespace with single or block stepping and the recovery counter
enabled. The test however used _TIF_SYSCALL_TRACE_MASK, which
includes a lot of bits that shouldn't be tested here.
Fix this by using TIF_SINGLESTEP and TIF_BLOCKSTEP directly.
I encountered this bug by enabling syscall tracepoints. Both in qemu and
on real hardware. As soon as i enabled the tracepoint (sys_exit_read,
but i guess it doesn't really matter which one), i got random page
faults in userspace almost immediately.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This implements the CONFIG_THREAD_INFO_IN_TASK option.
With this change:
- before thread_info was part of the stack and located at the beginning of the stack
- now the thread_info struct is moved and located inside the task_struct structure
- the stack is allocated and handled like the major other platforms
- drop the cpu field of thread_info and use instead the one in task_struct
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
|
|
This macro will also be used by the TOC code, so move it
into asm/assembly.h to avoid duplication.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The TIF_XXX flags are stored in the flags field in the thread_info
struct (TI_FLAGS), not in the flags field of the task_struct structure
(TASK_FLAGS).
It seems this bug didn't generate any important side-effects, otherwise it
wouldn't have went unnoticed for 12 years (since v2.6.32).
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: ecd3d4bc06e48 ("parisc: stop using task->ptrace for {single,block}step flags")
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: stable@vger.kernel.org
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
preempt_count in struct thread_info is unsigned int,
but the entry.S code used LDREG, which generates a 64 bit
load when compiled for 64 bit. Fix this to use an ldw and
also change the condition in the compare one line below
to only compares 32 bits, although ldw zero extends, and
that should work with a 64 bit compare.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
On parisc a spinlock is stored in the next page behind the pgd which
protects against parallel accesses to the pgd. That's why one additional
page (PGD_ALLOC_ORDER) is allocated for the pgd.
Matthew Wilcox suggested that we instead should use a pointer in the
struct page table for this spinlock and noted, that the comments for the
PGD_ORDER and PMD_ORDER defines were wrong.
Both suggestions are addressed with this patch. Instead of having an own
spinlock to protect the pgd, we now switch to use the existing
page_table_lock. Additionally, beside loading the pgd into cr25 in
switch_mm_irqs_off(), the physical address of this lock is loaded into
cr28 (tr4), so that we can avoid implementing a complicated lookup in
assembly for this lock in the TLB fault handlers.
The existing Hybrid L2/L3 page table scheme (where the pmd is adjacent
to the pgd) has been dropped with this patch.
Remove the locking in set_pte() and the huge-page pte functions too.
They trigger a spinlock recursion on 32bit machines and seem unnecessary.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Fixes: b37d1c1898b2 ("parisc: Use per-pagetable spinlock")
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When building a kernel without module support, the CONFIG_MLONGCALL option
needs to be enabled in order to reach symbols which are outside of a 22-bit
branch.
This patch changes the autodetection in the Kconfig script to always enable
CONFIG_MLONGCALL when modules are disabled and uses a far call to
preempt_schedule_irq() in intr_do_preempt() to reach the symbol in all cases.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org # v5.6+
|
|
The constant _TIF_USER_WORK_MASK will get extended by additional flags
in the future, so check against the bits set in this mask - with the
exception of _TIF_NEED_RESCHED which was tested a few lines above.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Correct the comments: The jump is forwards, not backwards.
Enable the interrupts after %r29 (reference param area) was loaded.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
No need to use an ordered store in pa_tlb_lock() and update the comment
regarng usage of the sid register to unlocak a spinlock in
tlb_unlock0().
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.0+
|
|
This reverts commit 9e5c602186a692a7e848c0da17aed40f49d30519.
No need to use the ldcw instruction as SMP spinlock release barrier.
Revert it to gain back speed again.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.2+
|
|
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Switch the entry code over to use CONFIG_PREEMPTION.
[bigeasy: +Kconfig]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-parisc@vger.kernel.org
Link: https://lore.kernel.org/r/20191015191821.11479-16-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The current code in ftrace_regs_caller() doesn't assign
%r3 to contain the address of the current frame. This
is hidden if the kernel is compiled with FRAME_POINTER,
but without it just crashes because it tries to dereference
an arbitrary address. Fix this by always setting %r3 to the
current stack frame.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Allow KPROBES to use the ftrace infrastructure on PA-RISC.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Sven Schnelle <svens@stackframe.org>
Acked-by: Christian Brauner <christian@brauner.io>
|
|
This patch implements dynamic ftrace for PA-RISC. The required mcount
call sequences can get pretty long, so instead of patching the
whole call sequence out of the functions, we are using
-fpatchable-function-entry from gcc. This puts a configurable amount of
NOPS before/at the start of the function. Taking do_sys_open() as example,
which would look like this when the call is patched out:
1036b248: 08 00 02 40 nop
1036b24c: 08 00 02 40 nop
1036b250: 08 00 02 40 nop
1036b254: 08 00 02 40 nop
1036b258 <do_sys_open>:
1036b258: 08 00 02 40 nop
1036b25c: 08 03 02 41 copy r3,r1
1036b260: 6b c2 3f d9 stw rp,-14(sp)
1036b264: 08 1e 02 43 copy sp,r3
1036b268: 6f c1 01 00 stw,ma r1,80(sp)
When ftrace gets enabled for this function the kernel will patch these
NOPs to:
1036b248: 10 19 57 20 <address of ftrace>
1036b24c: 6f c1 00 80 stw,ma r1,40(sp)
1036b250: 48 21 3f d1 ldw -18(r1),r1
1036b254: e8 20 c0 02 bv,n r0(r1)
1036b258 <do_sys_open>:
1036b258: e8 3f 1f df b,l,n .-c,r1
1036b25c: 08 03 02 41 copy r3,r1
1036b260: 6b c2 3f d9 stw rp,-14(sp)
1036b264: 08 1e 02 43 copy sp,r3
1036b268: 6f c1 01 00 stw,ma r1,80(sp)
So the first NOP in do_sys_open() will be patched to jump backwards into
some minimal trampoline code which pushes a stackframe, saves r1 which
holds the return address, loads the address of the real ftrace function,
and branches to that location. For 64 Bit things are getting a bit more
complicated (and longer) because we must make sure that the address of
ftrace location is 8 byte aligned, and the offset passed to ldd for
fetching the address is 8 byte aligned as well.
Note that gcc has a bug which misplaces the function label, and needs a
patch to make dynamic ftrace work. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90751 for details.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 or at your option any
later version this program is distributed in the hope that it will
be useful but without any warranty without even the implied warranty
of merchantability or fitness for a particular purpose see the gnu
general public license for more details you should have received a
copy of the gnu general public license along with this program if
not write to the free software foundation inc 675 mass ave cambridge
ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 77 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.837555891@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
PA-RISC uses a global spinlock to protect pagetable updates in the TLB
fault handlers. When multiple cores are taking TLB faults simultaneously,
the cache line containing the spinlock becomes a bottleneck.
This patch embeds the spinlock in the top level page directory, so that
every process has its own lock. It improves performance by 30% when
doing parallel compilations.
At least on the N class systems, only one PxTLB inter processor
broadcast can be active at any one time on the Merced bus. If a Merced
bus is found, this patch serializes the TLB flushes with the
pa_tlb_flush_lock spinlock.
v1: Initial patch by Mikulas
v2: Added Merced detection by Helge
v3: Revised TLB serialization by Dave & Helge
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
There are only a couple of instructions that can function as a memory
barrier on parisc. Currently, we use the sync instruction as a memory
barrier when releasing a spinlock. However, the ldcw instruction is a
better barrier when we have a handy memory location since it operates in
the cache on coherent machines.
This patch updates the spinlock release code to use ldcw. I also
changed the "stw,ma" instructions to "stw" instructions as it is not an
adequate barrier.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Use and mention the predefined LINUX_GATEWAY_SPACE constant in the
various important code sections which deal with the gateway page.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Remove two instruction from the hot path. The temporary move to %r9 is
unneccessary, and the zero-inialization of pte happens twice.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This patch adds the necessary code to patch a running kernel at runtime
to improve performance.
The current implementation offers a few optimizations variants:
- When running a SMP kernel on a single UP processor, unwanted assembler
statements like locking functions are overwritten with NOPs. When
multiple instructions shall be skipped, one branch instruction is used
instead of multiple nop instructions.
- In the UP case, some pdtlb and pitlb instructions are patched to
become pdtlb,l and pitlb,l which only flushes the CPU-local tlb
entries instead of broadcasting the flush to other CPUs in the system
and thus may improve performance.
- fic and fdc instructions are skipped if no I- or D-caches are
installed. This should speed up qemu emulation and cacheless systems.
- If no cache coherence is needed for IO operations, the relevant fdc
and sync instructions in the sba and ccio drivers are replaced by
nops.
- On systems which share I- and D-TLBs and thus don't have a seperate
instruction TLB, the pitlb instruction is replaced by a nop.
Live-patching is done early in the boot process, just after having run
the system inventory. No drivers are running and thus no external
interrupts should arrive. So the hope is that no TLB exceptions will
occur during the patching. If this turns out to be wrong we will
probably need to do the patching in real-mode.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Helge noticed that the address of the os_hpmc handler was not being
correctly calculated in the hpmc macro. As a result, PDCE_CHECK would
fail to call os_hpmc:
<Cpu2> e800009802e00000 0000000000000000 CC_ERR_CHECK_HPMC
<Cpu2> 37000f7302e00000 8040004000000000 CC_ERR_CPU_CHECK_SUMMARY
<Cpu2> f600105e02e00000 fffffff0f0c00000 CC_MC_HPMC_MONARCH_SELECTED
<Cpu2> 140003b202e00000 000000000000000b CC_ERR_HPMC_STATE_ENTRY
<Cpu2> 5600100b02e00000 00000000000001a0 CC_MC_OS_HPMC_LEN_ERR
<Cpu2> 5600106402e00000 fffffff0f0438e70 CC_MC_BR_TO_OS_HPMC_FAILED
<Cpu2> e800009802e00000 0000000000000000 CC_ERR_CHECK_HPMC
<Cpu2> 37000f7302e00000 8040004000000000 CC_ERR_CPU_CHECK_SUMMARY
<Cpu2> 4000109f02e00000 0000000000000000 CC_MC_HPMC_INITIATED
<Cpu2> 4000101902e00000 0000000000000000 CC_MC_MULTIPLE_HPMCS
<Cpu2> 030010d502e00000 0000000000000000 CC_CPU_STOP
The address problem can be seen by dumping the fault vector:
0000000040159000 <fault_vector_20>:
40159000: 63 6f 77 73 stb r15,-2447(dp)
40159004: 20 63 61 6e ldil L%b747000,r3
40159008: 20 66 6c 79 ldil L%-1c3b3000,r3
...
40159020: 08 00 02 40 nop
40159024: 20 6e 60 02 ldil L%15d000,r3
40159028: 34 63 00 00 ldo 0(r3),r3
4015902c: e8 60 c0 02 bv,n r0(r3)
40159030: 08 00 02 40 nop
40159034: 00 00 00 00 break 0,0
40159038: c0 00 70 00 bb,*< r0,sar,40159840 <fault_vector_20+0x840>
4015903c: 00 00 00 00 break 0,0
Location 40159038 should contain the physical address of os_hpmc:
000000004015d000 <os_hpmc>:
4015d000: 08 1a 02 43 copy r26,r3
4015d004: 01 c0 08 a4 mfctl iva,r4
4015d008: 48 85 00 68 ldw 34(r4),r5
This patch moves the address setup into initialize_ivt to resolve the
above problem. I tested the change by dumping the HPMC entry after setup:
0000000040209020: 8000240
0000000040209024: 206a2004
0000000040209028: 34630ac0
000000004020902c: e860c002
0000000040209030: 8000240
0000000040209034: 1bdddce6
0000000040209038: 15d000
000000004020903c: 1a0
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
accessed flag in TLB handler
This patch may resolve some races in TLB handling. Hopefully, TLB
inserts are accesses and protected by spin lock.
If not, we may need to IPI calls and do local purges on PA 2.0.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This change removes the PTE load and present check from the L2_ptep
macro. The load and check for kernel pages is now done in the tlb_lock
macro. This avoids a double load and check for user pages. The load
and check for user pages is now done inside the lock so the fault
handler can't be called while the entry is being updated. This version
uses an ordered store to release the lock when the page table entry
isn't present. It also corrects the check in the non SMP case.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fixes: 5b00ca0b8035 ("parisc: Restore possibility to execute 64-bit applications")
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Commit c8921d72e390 ("parisc: Fix and improve kernel stack unwinding")
broke booting of 64-bit kernels. On 64-bit kernels function pointers are
actually function descriptors which require dereferencing. In this patch
we instead declare functions in assembly code which are referenced from
C-code as external data pointers with the ENTRY() macro and thus can use
a simple external reference to the functions.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: c8921d72e390 ("parisc: Fix and improve kernel stack unwinding")
|
|
Executing 64-bit applications was broken. This patch restores this
support and cleans up some code paths.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This patchset fixes and improves stack unwinding a lot:
1. Show backward stack traces with up to 30 callsites
2. Add callinfo to ENTRY_CFI() such that every assembler function will get an
entry in the unwind table
3. Use constants instead of numbers in call_on_stack()
4. Do not depend on CONFIG_KALLSYMS to generate backtraces.
5. Speed up backtrace generation
Make sure you have this patch to GNU as installed:
https://sourceware.org/ml/binutils/2018-07/msg00474.html
Without this patch, unwind info in the kernel is often wrong for various
functions.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
For years I thought all parisc machines executed loads and stores in
order. However, Jeff Law recently indicated on gcc-patches that this is
not correct. There are various degrees of out-of-order execution all the
way back to the PA7xxx processor series (hit-under-miss). The PA8xxx
series has full out-of-order execution for both integer operations, and
loads and stores.
This is described in the following article:
http://web.archive.org/web/20040214092531/http://www.cpus.hp.com/technical_references/advperf.shtml
For this reason, we need to define mb() and to insert a memory barrier
before the store unlocking spinlocks. This ensures that all memory
accesses are complete prior to unlocking. The ldcw instruction performs
the same function on entry.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Qemu for PARISC reported on a 32bit SMP parisc kernel strange failures
about "Not-handled unaligned insn 0x0e8011d6 and 0x0c2011c9."
Those opcodes evaluate to the ldcw() assembly instruction which requires
(on 32bit) an alignment of 16 bytes to ensure atomicity.
As it turns out, qemu is correct and in our assembly code in entry.S and
pacache.S we don't pay attention to the required alignment.
This patch fixes the problem by aligning the lock offset in assembly
code in the same manner as we do in our C-code.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.0+
|
|
This reverts commit 5c38602d83e584047906b41b162ababd4db4106d.
Interrupts can't be enabled early because the register saves are done on
the thread stack prior to switching to the IRQ stack. This caused stack
overflows and the thread stack needed increasing to 32k. Even then,
stack overflows still occasionally occurred.
Background:
Even with a 32 kB thread stack, I have seen instances where the thread
stack overflowed on the mx3210 buildd. Detection of stack overflow only
occurs when we have an external interrupt. When an external interrupt
occurs, we switch to the thread stack if we are not already on a kernel
stack. Then, registers and specials are saved to the kernel stack.
The bug occurs in intr_return where interrupts are reenabled prior to
returning from the interrupt. This was done incase we need to schedule
or deliver signals. However, it introduces the possibility that
multiple external interrupts may occur on the thread stack and cause a
stack overflow. These might not be detected and cause the kernel to
misbehave in random ways.
This patch changes the code back to only reenable interrupts when we are
going to schedule or deliver signals. As a result, we generally return
from an interrupt before reenabling interrupts. This minimizes the
growth of the thread stack.
Fixes: 5c38602d83e5 ("parisc: Re-enable interrupts early")
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This typo is quite common. Fix it and add it to the spelling file so
that checkpatch catches it earlier.
Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since kernel 3.9 we re-enable interrupts quite late due to commit c207a76bf15
("parisc: only re-enable interrupts if we need to schedule or deliver signals
when returning to userspace"). At that time the parisc kernel had no dedicated
IRQ stack, and this commit prevented kernel stack overflows.
But since commit 200c880420a ("parisc: implement irq stacks") we now have an
IRQ stack, so we may be safe now. And when CONFIG_DEBUG_STACKOVERFLOW=y is
enabled, we can even check at runtime for overflows.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Add ENTRY_CFI() and ENDPROC_CFI() macros for dwarf debug info and
convert assembly users to new macros.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Depending on config options we will need to use a long jump to reach
ftrace_return_to_handler(). Additionally only compile the
parisc_return_to_handler code when CONFIG_FUNCTION_GRAPH_TRACER is set.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When enabling all-branch ftrace support (CONFIG_PROFILE_ALL_BRANCHES)
the kernel gets really huge and some ftrace assembler functions like
mcount can't reach the ftrace helper functions which are written in C.
Avoid this problem of too distant branches by moving the ftrace C-helper
functions into the .text.hot section which is put in front of the
standard .text section by the linker.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix the FTRACE function tracer for 32- and 64-bit kernel.
The former code was horribly broken.
Reimplement most coding in assembly and utilize optimizations, e.g. put
mcount() and ftrace_stub() into one L1 cacheline.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This patch adds huge page support to allow userspace to allocate huge
pages and to use hugetlbfs filesystem on 32- and 64-bit Linux kernels.
A later patch will add kernel support to map kernel text and data on
huge pages.
The only requirement is, that the kernel needs to be compiled for a
PA8X00 CPU (PA2.0 architecture). Older PA1.X CPUs do not support
variable page sizes. 64bit Kernels are compiled for PA2.0 by default.
Technically on parisc multiple physical huge pages may be needed to
emulate standard 2MB huge pages.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
A fault vector on parisc needs to be 2K aligned. Furthermore the
checksum of the fault vector needs to sum up to 0 which is being
calculated and written at runtime.
Up to now we aligned both PA20 and PA11 fault vectors on the same 4K
page in order to easily write the checksum after having mapped the
kernel read-only (by mapping this page only as read-write).
But when we want to map the kernel text and data on huge pages this
makes things harder.
So, simplify it by aligning both fault vectors on 2K boundries and write
the checksum before we map the page read-only.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
based on timing results
The increased use of pdtlb/pitlb instructions seemed to increase the
frequency of random segmentation faults building packages. Further, we
had a number of cases where TLB inserts would repeatedly fail and all
forward progress would stop. The Haskell ghc package caused a lot of
trouble in this area. The final indication of a race in pte handling was
this syslog entry on sibaris (C8000):
swap_free: Unused swap offset entry 00000004
BUG: Bad page map in process mysqld pte:00000100 pmd:019bbec5
addr:00000000ec464000 vm_flags:00100073 anon_vma:0000000221023828 mapping: (null) index:ec464
CPU: 1 PID: 9176 Comm: mysqld Not tainted 4.0.0-2-parisc64-smp #1 Debian 4.0.5-1
Backtrace:
[<0000000040173eb0>] show_stack+0x20/0x38
[<0000000040444424>] dump_stack+0x9c/0x110
[<00000000402a0d38>] print_bad_pte+0x1a8/0x278
[<00000000402a28b8>] unmap_single_vma+0x3d8/0x770
[<00000000402a4090>] zap_page_range+0xf0/0x198
[<00000000402ba2a4>] SyS_madvise+0x404/0x8c0
Note that the pte value is 0 except for the accessed bit 0x100. This bit
shouldn't be set without the present bit.
It should be noted that the madvise system call is probably a trigger for many
of the random segmentation faults.
In looking at the kernel code, I found the following problems:
1) The pte_clear define didn't take TLB lock when clearing a pte.
2) We didn't test pte present bit inside lock in exception support.
3) The pte and tlb locks needed to merged in order to ensure consistency
between page table and TLB. This also has the effect of serializing TLB
broadcasts on SMP systems.
The attached change implements the above and a few other tweaks to try
to improve performance. Based on the timing code, TLB purges are very
slow (e.g., ~ 209 cycles per page on rp3440). Thus, I think it
beneficial to test the split_tlb variable to avoid duplicate purges.
Probably, all PA 2.0 machines have combined TLBs.
I dropped using __flush_tlb_range in flush_tlb_mm as I realized all
applications and most threads have a stack size that is too large to
make this useful. I added some comments to this effect.
Since implementing 1 through 3, I haven't had any random segmentation
faults on mx3210 (rp3440) in about one week of building code and running
as a Debian buildd.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
We would want to use number of page table level to define mm_struct.
Let's expose it as CONFIG_PGTABLE_LEVELS.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Drop code to create HP-UX gateway page and syscall entry code.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The get_stack_use_cr30 and get_stack_use_r30 macros allocate a stack
frame for external interrupts and interruptions requiring a stack frame.
They are currently not reentrant in that they save register context
before the stack is set or adjusted.
I have observed a number of system crashes where there was clear
evidence of stack corruption during interrupt processing, and as a
result register corruption. Some interruptions can still occur during
interruption processing, however external interrupts are disabled and
data TLB misses don't occur for absolute accesses. So, it's not entirely
clear what triggers this issue. Also, if an interruption occurs when
Q=0, it is generally not possible to recover as the shadowed registers
are not copied.
The attached patch reworks the get_stack_use_cr30 and get_stack_use_r30
macros to allocate stack before doing register saves. The new code is a
couple of instructions shorter than the old implementation. Thus, it's
an improvement even if it doesn't fully resolve the stack corruption
issue. Based on limited testing, it improves SMP system stability.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Currently, race conditions exist in the handling of TLB interruptions in
entry.S. In particular, dirty bit updates can be lost if an accessed
interruption occurs just after the dirty bit interruption on a different
cpu. Lost dirty bit updates result in user pages not being flushed and
general system instability. This change adds lock and unlock macros to
synchronize all PTE and TLB updates done in entry.S. As a result,
userspace stability is significantly improved.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Default kernel stack size on parisc is 16k. During tests we found that the
kernel stack can easily grow beyond 13k, which leaves 3k left for irq
processing.
This patch adds the possibility to activate an additional stack of 16k per CPU
which is being used during irq processing. This implementation does not yet
uses this irq stack for the irq bh handler.
The assembler code for call_on_stack was heavily cleaned up by John
David Anglin.
CC: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
when returning to userspace
Helge and I have found that we have a kernel stack overflow problem
which causes a variety of random failures.
Currently, we re-enable interrupts when returning from an external
interrupt incase we need to schedule or delivery
signals. As a result, a potentially unlimited number of interrupts
can occur while we are running on the kernel
stack. It is very limited in space (currently, 16k). This change
defers enabling interrupts until we have
actually decided to schedule or delivery signals. This only occurs
when we about to return to userspace. This
limits the number of interrupts on the kernel stack to one. In other
cases, interrupts remain disabled until the
final return from interrupt (rfi).
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The "b" branch instruction used in the fork_like macro only can handle
17-bit pc-relative offsets.
This fails with an out of range offset with some .config files.
Rewrite to use the "be" instruction which
can branch to any address in a space.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This patch fixes partly PAGE_SIZEs of 16K or 64K by adjusting the
assembler PTE lookup code and the assembler TEMPALIAS code. Furthermore
some data alignments for PAGE_SIZE have been limited to 4K (or less) to
not waste too much memory with greater page sizes. As a side note, the
palo loader can (currently) only handle up to 10 ELF segments which is
fixed with tighter aligning as well.
My testings indicated that the ldci command in the sba iommu coding
needed adjustment by the PAGE_SHIFT value and that the I/O PDIR Page
size was only set to 4K for my machine (C3000).
All this fixes partly the boot, but there are still quite some caching
problems left. Examples are e.g. the symbios logic driver which is
failing:
sym0: <896> rev 0x7 at pci 0000:00:0f.0 irq 69
sym0: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking
CACHE TEST FAILED: DMA error (dstat=0x81).sym0: CACHE INCORRECTLY CONFIGURED.
and the tulip network driver which doesn't seem to work correctly
either:
Sending BOOTP requests .net eth0: Setting full-duplex based on MII#1
link partner capability of 05e1
..... timed out!
Beside those kernel fixes glibc will need fixes too to be able to handle
>4K page sizes.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull signal handling cleanups from Al Viro:
"This is the first pile; another one will come a bit later and will
contain SYSCALL_DEFINE-related patches.
- a bunch of signal-related syscalls (both native and compat)
unified.
- a bunch of compat syscalls switched to COMPAT_SYSCALL_DEFINE
(fixing several potential problems with missing argument
validation, while we are at it)
- a lot of now-pointless wrappers killed
- a couple of architectures (cris and hexagon) forgot to save
altstack settings into sigframe, even though they used the
(uninitialized) values in sigreturn; fixed.
- microblaze fixes for delivery of multiple signals arriving at once
- saner set of helpers for signal delivery introduced, several
architectures switched to using those."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (143 commits)
x86: convert to ksignal
sparc: convert to ksignal
arm: switch to struct ksignal * passing
alpha: pass k_sigaction and siginfo_t using ksignal pointer
burying unused conditionals
make do_sigaltstack() static
arm64: switch to generic old sigaction() (compat-only)
arm64: switch to generic compat rt_sigaction()
arm64: switch compat to generic old sigsuspend
arm64: switch to generic compat rt_sigqueueinfo()
arm64: switch to generic compat rt_sigpending()
arm64: switch to generic compat rt_sigprocmask()
arm64: switch to generic sigaltstack
sparc: switch to generic old sigsuspend
sparc: COMPAT_SYSCALL_DEFINE does all sign-extension as well as SYSCALL_DEFINE
sparc: kill sign-extending wrappers for native syscalls
kill sparc32_open()
sparc: switch to use of generic old sigaction
sparc: switch sys_compat_rt_sigaction() to COMPAT_SYSCALL_DEFINE
mips: switch to generic sys_fork() and sys_clone()
...
|
|
This comment describes incredibly subtle code, so it should be right!
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Various GCC tests use gdb to simulate a multithreaded application. Many of
these tests have been failing on parisc linux.
GCC does this by using gdb to single-step the application, then gdb is used to
call other test specific code. Where this fails is when the application is
stepped into the delay slot of a taken branch. This sets the PSW B bit. When
the test specific code is executed, this usually clears the PSW B bit.
Currently, gdb is not allowed to set the B bit. So, the code falls through what
should be a taken branch.
The attached patch adds the PSW B bit to the set of bits that gdb is allowed to
set. In order to set the B bit, the trace system call must return using an
interrupt restore. The patch also modifies this code to use the saved IAOQ
values when they are saved by a ptrace syscall or interruption.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
ACKed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* in user thread case the registers had been copied as part of task_struct
already; no need to do it in copy_thread().
* no need to store kernel stack pointer into regs->r21; we know its offset
anyway.
* no need to clobber r3 in sys_fork_wrapper and friends - r28 will do just
as well and *it* will be overwritten anyway.
* no need to mess with storing the return address for child - it should just
use syscall_exit.
* no need to bother with separate stack frame for sys_clone() - just branch
there and be done with that.
* no need to bother with wrapper_exit - we need it only on the child_return,
so let's just do it there.
* use the same ksp for kernel threads and userland ones, while we are at it,
and let ret_from_kernel_execve() go through the normal syscall_exit. More
straightforward is better here...
[fixes from jejb folded]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull second pile of signal handling patches from Al Viro:
"This one is just task_work_add() series + remaining prereqs for it.
There probably will be another pull request from that tree this
cycle - at least for helpers, to get them out of the way for per-arch
fixes remaining in the tree."
Fix trivial conflict in kernel/irq/manage.c: the merge of Andrew's pile
had brought in commit 97fd75b7b8e0 ("kernel/irq/manage.c: use the
pr_foo() infrastructure to prefix printks") which changed one of the
pr_err() calls that this merge moves around.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
keys: kill task_struct->replacement_session_keyring
keys: kill the dummy key_replace_session_keyring()
keys: change keyctl_session_to_parent() to use task_work_add()
genirq: reimplement exit_irq_thread() hook via task_work_add()
task_work_add: generic process-context callbacks
avr32: missed _TIF_NOTIFY_RESUME on one of do_notify_resume callers
parisc: need to check NOTIFY_RESUME when exiting from syscall
move key_repace_session_keyring() into tracehook_notify_resume()
TIF_NOTIFY_RESUME is defined on all targets now
|
|
commit 5e185581d7c46ddd33cd9c01106d1fc86efb9376
Author: James Bottomley <JBottomley@Parallels.com>
[PARISC] fix PA1.1 oops on boot
Didn't quite fix the crash on boot. It moved it from PA1.1 processors to
PA2.0 narrow kernels. The final fix is to make sure the [id]tlb_miss_20 paths
also work. Even on narrow systems, these paths require using the wide
instructions becuase the tlb insertion format is wide. Fix this by
conditioning the dep[wd],z on whether we're being called from _11 or _20[w]
paths.
Tested-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
... not just on return from interrupt
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
All PA1.1 systems have been oopsing on boot since
commit f311847c2fcebd81912e2f0caf8a461dec28db41
Author: James Bottomley <James.Bottomley@HansenPartnership.com>
Date: Wed Dec 22 10:22:11 2010 -0600
parisc: flush pages through tmpalias space
because a PA2.0 instruction was accidentally introduced into the PA1.1 TLB
insertion interruption path when it was consolidated with the do_alias macro.
Fix the do_alias macro only to use PA2.0 instructions if compiled for 64 bit.
Cc: stable@vger.kernel.org #2.6.39+
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
Currently parisc has the whole kernel marked as RWX, meaning any
kernel page at all is eligible to be executed. This can cause a
theoretical problem on systems with combined I/D TLB because the act
of referencing a page causes a TLB insertion with an executable bit.
This TLB entry may be used by the CPU as the basis for speculating the
page into the I-Cache. If this speculated page is subsequently used
for a user process, there is the possibility we will get a stale
I-cache line picked up as the binary executes.
As a point of good practise, only mark actual kernel text pages as
executable. The same has to be done for init_text pages, but they're
converted to data pages (and the I-Cache flushed) when the init memory
is released.
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
|
This was used to flush a region even if the page table entry had been
cleared. In theory this was never necessary, but now we've switched to
alias based flushing, the whole set of code associated with it can be dumped.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
|
The kernel has an 8M tmpailas space (originally designed for copying
and clearing pages but now only used for clearing). The idea is
to place zeros into the cache above a physical page rather than into
the physical page and flush the cache, because often the zeros end up
being replaced quickly anyway.
We can also use the tmpalias space for flushing a page. The difference
here is that we have to do tmpalias processing in the non access data and
instruction traps. The principle is the same: as long as we know the physical
address and have a virtual address congruent to the real one, the flush will
be effective.
In order to use the tmpalias space, the icache miss path has to be enhanced to
check for the alias region to make the fic instruction effective.
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
|
The EXTR, DEP and DEPI macros are unnecessary. There are PA 1.X
pneumonics available with the same functionality, and the DEP and DEPI
macros conflict with assembler pneumonics.
Tested on a variety of 32 and 64-bit systems.
Signed-off-by: John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
Signed-off-by: John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
Signed-off-by: John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
task->ptrace flags belong to generic code, so instead thief some
TIF_ bits to use. Somewhat risky conversion of code to test TASK_FLAGS
instead of TASK_PTRACE in assembly, but it looks alright in the end.
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
|
|
Implement TIF_NOTIFY_RESUME for most of those architectures in which isn't yet
available, and, whilst we're at it, have it call the appropriate tracehook.
After this patch, blackfin, m68k* and xtensa still lack support and need
alteration of assembly code to make it work.
Resume notification can then be used (by a later patch) to install a new
session keyring on the parent of a process.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
cc: linux-arch@vger.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Signed-off-by: John David Anglin <dave@hiauly1.hia.nrc.ca>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This patch adds the ftrace debugging functionality to the parisc kernel.
It will currently only work with 64bit kernels, because the gcc options -pg
and -ffunction-sections can't be enabled at the same time and -ffunction-sections
is still needed to be able to link 32bit kernels.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
|
|
Introduce new convert_for_tlb_insert20 macro and use it to replace assembler
statements with hardcoded constants.
This change allows the parisc64 kernel to boot with 16kb default kernel page size,
aka CONFIG_PARISC_PAGE_SIZE_16KB=y.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
|
|
A few small fixups:
* _PAGE_SIZE_ENCODING_DEFAULT is wrong here, as one might assume that
it's possible to define the page size that way. This is wrong. Use 0 instead.
* use constants instead of hardcoded numerical values in depi and extru
while building the PFN out of the pte entry
* use SHRREG instead of extru (iitlba expects the PFN at bits {7..26})
Still wondering why we can use the same register (pte) as extru source
and target register, but it seems to work on PA1.1 and PA2.0...
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
|
|
Add braces around the macro arguments, else for example
"shl %r1, 5-3, %r2" would not expand to what you would assume.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
|
|
This reverts commit bd3bb8c15b9a80dbddfb7905b237a4a11a4725b4.
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
|
|
This work enables us to remove -traditional from $AFLAGS on
parisc.
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
|
|
This trivial patch fixes the following section warnings on PARISC:
> WARNING: vmlinux.o (.text.1): unexpected section name.
>The (.[number]+) following section name are ld generated and not expected.
> Did you forget to use "ax"/"aw" in a .S file?
> Note that for example <linux/init.h> contains
> section definitions for use in .S files.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
|
|
It's been unfinished and broken long enough, and I have some ideas on how
to do it more cleanly.
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
|
|
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
|
|
Amazingly, parisc was the only arch effected by this...
Convert register-sized loads/stores to always be 32-bit for these fields.
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
Kyle,
This patch removes remnants of softirq support that we no longer need.
I suspect this was just overlooked when willy convert parisc to generic
IRQ support.
Tested on c3600 32-bit UP.
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
[and tested on a c8000 64-bit SMP --kyle]
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
- noticed by Randolph Chung (tausq)
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
Use the macros in entry.S
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
And unmask the pselect6/ppoll system calls.
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
And clean up 32/64bit branch assembler statements
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
intr_restore in intr_do_preempt. This prevents the execution
of an unwanted insn...
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
Abstract existing shift register left macros as shift register
right are. This lends itself to a nice clean up of some #ifdef
blocks in entry.S
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
The patch below corrects multiple occurances of "the the"
typos across several files, both in source comments and KConfig files.
There is no actual code changed, only text. Note this only affects the /arch
directory, and I believe I could find many more elsewhere. :)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
ldcw,co should always be used on pa2.0, otherwise the strict cache
width alignment requirement is not relaxed.
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
More work towards supporing multiple page sizes on 64-bit. Convert
some assumptions that 64bit uses 3 level page tables into testing
PT_NLEVELS. Also some BUG() to BUG_ON() conversions and some cleanups
to assembler.
Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
We were only copying 32-bits of the PTE/PFN, not the full 52-bits.
Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
Document clobbers and args in entry.S and syscall.S.
entry.S: Add comment to indicate that cr27 may recycle and EDEADLOCK
detection is not 100% correct. Since this is only enabled when using
ENABLE_LWS_DEBUG, the user is warned by the comment.
Signed-off-by: Carlos O'Donell <carlos@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
remove the spurious do_softirq calls from entry.S
With these in we were calling do_softirq twice; plus the calls in
entry.S took no account of nesting.
Signed-off-by: James Bottomley <jejb@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
Fix the alloc_slabmgmt panic
Hopefully this should also fix a lot of other intermittent kernel bugs.
The problem has been around since 2.6.9-rc2-pa6 when we allowed
floating point registers to be used in kernel code. The essence of
the problem is that gcc prefers to use floating point for integer
divides and multiples. Further, it can rely on the values in the no
clobber fp regs being correct across a function call. Unfortunately,
our task switch function only saves the integer no clobber registers,
not the fp ones, so if gcc makes a function call to any function in
the kernel which could sleep, the values it is relying on in any no
clobber floating point register may be lost. In the case of
alloc_slabmgmt, the value of the page offset is being stored in %fr12
across a call to kmem_getpages(), which sleeps if no pages are
available. Thus, the offset can be trashed and the slab code can end
up with a completely bogus address leading to corruption.
Kudos to Randolph who came up with the program to trip this problem at
will and thus allowed it to be tracked and fixed.
Signed-off-by: James Bottomley <jejb@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
2.6.12-rc4-pa3 s/__LP64__/CONFIG_64BIT/ and fixup config.h usage
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
convert some bl calls to b,l or bv to use longer offsets
Signed-off-by: Randolph Chung <tausq@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
2.6.12-rc4-pa3 : first pass at making sure use of RFI conforms to
PA 2.0 arch pages F-4 and F-5, PA 1.1 Arch page 3-19 and 3-20.
The discussion revolves around all the rules for clearing PSW Q-bit.
The hard part is meeting all the rules for "relied upon translation".
.align directive is used to guarantee the critical sequence ends more than
8 instructions (32 bytes) from the end of page.
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
|
|
Delete obsoleted parts form arch makefiles and rename to asm-offsets.h
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
|
