Add eMCA test case

eMCA is a kind of new mechanism to report H/W errors since
IVB-EX platform. By now only eMCA Gen1 is supported, which
means only CE error can be reported from this path.

Signed-off-by: Liu, ZhilongX <zhilongx.liu@intel.com>
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>

4 files changed, 190 insertions, 0 deletions

diff --git a/cases/function/emca-inj/emca-inject.sh b/cases/function/emca-inj/emca-inject.sh
new file mode 100755
index 0000000..d48bc1d
--- /dev/null
+++ b/cases/function/emca-inj/emca-inject.sh
@@ -0,0 +1,142 @@
+# Copyright (C) 2014, Intel Corp.
+# This file is released under the GPLv2.
+#
+#
+export ROOT=`(cd ../../../; pwd)`
+
+. $ROOT/lib/functions.sh
+setup_path
+. $ROOT/lib/mce.sh
+
+APEI_IF=""
+eMCA_REC="DIMM location:"
+LOG_DIR=$ROOT/cases/function/emca-inj/log
+LOG=$LOG_DIR/$(date +%Y-%m-%d.%H.%M.%S)-`uname -r`.log
+
+check_err_type()
+{
+	local type=`printf 0x%08x $1`
+
+	cat $APEI_IF/available_error_type 2>/dev/null | cut -f1 | grep -q $type
+	[ $? -eq 0 ] ||
+	{
+		echo "The error type \"$1\" is not supported on this platform"
+		return 1
+	}
+}
+
+# On some machines the trigger will be happend after 15 ~ 20 seconds, so
+# when no proper log is read out, just executing wait-retry loop until
+# timeout.
+check_result()
+{
+	local timeout=25
+	local sleep=5
+	local time=0
+
+	echo -e "<<< kernel version is as below >>>\n" >> $LOG
+	uname -a >> $LOG
+	cat /etc/issue >> $LOG
+	echo -e "\n<<< dmesg is as below >>>\n" >> $LOG
+	dmesg -c >> $LOG 2>&1
+	while [ $time -lt $timeout ]
+	do
+		grep -q "$eMCA_REC" $LOG
+		if [ $? -eq 0 ]
+		then
+			echo -e "\neMCA record is OK\n" |tee -a $LOG
+			echo 0 > $TMP_DIR/emca.$$
+			return
+		fi
+		sleep $sleep
+		time=`expr $time + $sleep`
+	done
+	echo -e "\neMCA record is not expected\n" |tee -a $LOG
+	echo 1 > $TMP_DIR/emca.$$
+}
+
+clean_up_eMCA()
+{
+	rmmod acpi_extlog &> /dev/null
+	rmmod einj &> /dev/null
+}
+
+main()
+{
+	local ret
+	#error type
+	local type=$1
+
+	echo 0 > $TMP_DIR/emca.$$
+	mkdir -p $LOG_DIR
+	dmesg -c > /dev/null
+
+	check_debugfs
+	APEI_IF=`cat /proc/mounts | grep debugfs | cut -d ' ' -f2 | head -1`/apei/einj
+	if [ ! -d $APEI_IF ]; then
+		modprobe einj param_extension=1
+		if [ $? -ne 0 ];then
+			clean_up_eMCA
+			die "module einj isn't supported or EINJ Table doesn't exist?"
+		fi
+	fi
+	check_eMCA_config
+	check_err_type $type
+	[ $? -ne 0 ] && return 1
+	sleep 2
+	echo $type > $APEI_IF/error_type
+	killall simple_process &> /dev/null
+	simple_process > /dev/null &
+	page-types -p `pidof simple_process` -LN -b ano > $TMP_DIR/pagelist.$$
+
+	ADDR=`awk '$2 != "offset" {print "0x"$2"000"}' $TMP_DIR/pagelist.$$ | sed -n -e '1p'`
+	if [ -f $APEI_IF/param1 ]
+	then
+		echo $ADDR > $APEI_IF/param1
+		echo 0xfffffffffffff000 > $APEI_IF/param2
+		echo 1 > $APEI_IF/notrigger
+	else
+		clean_up_eMCA
+		die "$APEI_IF/param'1-2' are missed! Ensure your BIOS supporting it and enabled."
+	fi
+
+	echo 1 > $APEI_IF/error_inject
+	if [ $? -ne 0 ]; then
+		cat <<-EOF
+		Error injection fails. It may happens because of bogus BIOS. For detail
+		information please refer to following file:
+		$LOG
+
+		EOF
+		clean_up_eMCA
+		return 1
+	fi
+
+	sleep 1
+	check_result
+	grep -q "0" $TMP_DIR/emca.$$
+	ret=$?
+	clean_up_eMCA
+	if [ $ret -ne 0 ]
+	then
+		echo -e "\nTest FAILED\n"
+	else
+		echo -e "\nTest PASSED\n"
+	fi
+	return $ret
+}
+
+usage()
+{
+	cat <<-EOF
+	usage: ${0##*/} [ available_error_type ]
+	example: ${0##*/} [ only support 0x8 injection ]
+
+	EOF
+
+	exit 0
+}
+
+[ $# -eq 0 ] && usage
+
+main $1
diff --git a/cases/function/emca-inj/runtest.sh b/cases/function/emca-inj/runtest.sh
new file mode 100755
index 0000000..55af5d3
--- /dev/null
+++ b/cases/function/emca-inj/runtest.sh
@@ -0,0 +1,35 @@
+#!/bin/bash
+
+cat <<-EOF
+
+***************************************************************************
+Pay attention:
+
+This is basic eMCA functional test. By now only eMCA Gen1 is supported,
+which means only Corrected Error injection/trigger is doable.
+***************************************************************************
+
+EOF
+
+TMP="../../../work"
+TMP_DIR=${TMP_DIR:-$TMP}
+if [ ! -d $TMP_DIR ]; then
+	TMP_DIR=$TMP
+fi
+export TMP_DIR
+
+echo 0 > $TMP_DIR/error.$$
+
+pushd `dirname $0` > /dev/null
+./emca-inject.sh 0x8
+[ $? -eq 0 ] || echo 1 > $TMP_DIR/error.$$
+popd > /dev/null
+
+grep -q "1" $TMP_DIR/error.$$
+if [ $? -eq 0 ]
+then
+	exit 1
+else
+	exit 0
+fi
+
diff --git a/groups/function b/groups/function
index c2ec85e..6e28f35 100644
--- a/groups/function
+++ b/groups/function
@@ -1,6 +1,8 @@
 APEI-INJ cases/function/apei-inj/runtest.sh on
 EINJ-EXT cases/function/einj-ext/runtest.sh off
 ERST-INJ cases/function/erst-inject/runtest.sh on
+#eMCA test depends on proper BIOS setting
+eMCA cases/function/emca-inj/runtest.sh off
 #PFA test depends on correct BIOS/mcelog setting
 PFA cases/function/pfa/runtest.sh on
 #SRAR test highly depends on BIOS implementation
diff --git a/lib/mce.sh b/lib/mce.sh
index 0000ccb..d5ac37b 100755
--- a/lib/mce.sh
+++ b/lib/mce.sh
@@ -307,6 +307,17 @@ check_debugfs()
 	[ $? -ne 0 ] && die "Kernel without debugfs support ?"
 }
 
+check_eMCA_config()
+{
+	MODULE="acpi_extlog"
+
+	cat /proc/iomem | grep -q -o "L1 Table"
+	if [ $? -ne 0 ]; then
+		modprobe $MODULE &> /dev/null
+		[ $? -ne 0 ] && die "module $MODULE isn't supported or eMCA Table doesn't exist?"
+	fi
+}
+
 # should be called after check_debugfs
 check_mce()
 {