Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The clk core gains a new set of APIs that allow drivers to both
  acquire clks and prepare and enable them at the same time. This also
  comes with devm support so that drivers can make a single call to get
  and prepare and enable the clk and have that all undone when their
  driver is removed.

  Many folks have requested this feature over the years, but we've had
  disagreements about how to implement it and if it was worthwhile to
  encourage drivers to use such an API.

  Now it's here, so let's see how it goes.

  I hope that by introducing this API we can identify drivers that would
  benefit from further consolidation of clk API usage, possibly by
  moving such logic to the bus layer and out of drivers altogether.

  Outside of that major API update, we have the usual collection of
  driver updates. A few new SoCs are supported, mostly Qualcomm and
  Renesas this time around. Then we have the long tail of non-critical
  fixes and minor feature additions to various clk drivers.

  And finally more clk provider migration to struct clk_parent_data,
  reducing boot times in the process.

  Summary:

  Core:

   - devm helpers for clk_get() + clk_prepare() and clk_enable()

  New Drivers:

   - Support for the camera clock controller in Qualcomm SM8450 and the
     display and gpu clock controllers in Qualcomm SM8350

   - Add support for the Renesas RZ/Five SoC

  Updates:

   - Various fixes, new clocks and USB GDSCs are introduced for Qualcomm
     IPQ8074

   - Fixes to Qualcomm MSM8939 for issues introduced by inheriting the
     MSM8916 GCC driver

   - Support for a new type of voteable GDSCs used by Qualcomm SC8280XP
     PCIe GDSCs

   - Qualcomm SC8280XP pipe clocks transitioned to the new phy-mux
     implementation

   - Qualcomm MSM8996 GCC, RPM clock driver and some clocks in MSM8994
     GCC are migrated to use clk_parent_data

   - Corrected the topology for Titan (camera) GDSCs on Qualcomm SDM845
     and SM8250

   - Qualcomm MSM8916 gains more possible frequencies for its GP clocks.

   - The GCC and tsens handling on Qualcomm MSM8960 is reworked to mimic
     the design in IPQ8074 to allow the GCC driver to probe earlier.

   - The regulator based mmcx supply for Qualcomm dispcc and videocc is
     dropped, as the only upstream target that adapted this interface
     was transitioned several kernel versions ago

   - Qualcomm GDSCs found to be enabled at boot will now reflect in the
     enable count of the supply, as was done with the regulator supplies
     previously

   - Correct adc1, nic_media and edma1's parents for NXP i.MX93

   - rdiv, mfd values, the return rate in recalc_rate and add more
     frequencies in the table for fracn-gppll on i.MX

   - Remove Allwinner workaround logic/compatible in fixed factor code

   - MediaTek clk driver cleanups

   - Add reset support to more MediaTek clk drivers

   - deduplicate Allwinner ccu_clks arrays

   - Allwinner H6 GPU DFS support

   - Adjust Allwinner Kconfig to limit choice

   - Fix initconst confusion on Renesas R-Car Gen4

   - Add GPT/POEG (PWM) clocks and resets on Renesas RZ/G2L

   - Add PFC and WDT clocks and resets on Renesas RZ/V2M

   - Add thermal, SDHI, Z (CPU core), PCIe, and HSCIF (serial) clocks on
     Renesas R-Car S4-8"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (124 commits)
  clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw()
  clk: mux: Introduce devm_clk_hw_register_mux_parent_hws()
  clk: divider: Introduce devm_clk_hw_register_divider_parent_hw()
  clk: qcom: gcc-msm8994: use parent_hws for gpll0/4
  clk: qcom: clk-rpm: convert to parent_data API
  dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc
  clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies
  clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies
  clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies
  clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions
  clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock
  clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk
  clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled
  clk: qcom: Drop mmcx gdsc supply for dispcc and videocc
  clk: qcom: fix build error initializer element is not constant
  clk: sprd: Add dt-bindings include file for UMS512
  dt-bindings: clk: sprd: Add bindings for ums512 clock controller
  clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS
  dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources
  clk: qcom: add support for SM8350 DISPCC
  ...

13 files changed, 223 insertions, 27 deletions

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml
index 0886e2e335bb1b..661047d26e11c3 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml
@@ -39,6 +39,9 @@ properties:
   '#clock-cells':
     const: 1
 
+  '#reset-cells':
+    const: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml
index c8c67c033f8c5d..b57cc2e69efba0 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml
@@ -24,7 +24,6 @@ properties:
           - mediatek,mt8192-imp_iic_wrap_w
           - mediatek,mt8192-imp_iic_wrap_n
           - mediatek,mt8192-msdc_top
-          - mediatek,mt8192-msdc
           - mediatek,mt8192-mfgcfg
           - mediatek,mt8192-imgsys
           - mediatek,mt8192-imgsys2
@@ -108,13 +107,6 @@ examples:
     };
 
   - |
-    msdc: clock-controller@11f60000 {
-        compatible = "mediatek,mt8192-msdc";
-        reg = <0x11f60000 0x1000>;
-        #clock-cells = <1>;
-    };
-
-  - |
     mfgcfg: clock-controller@13fbf000 {
         compatible = "mediatek,mt8192-mfgcfg";
         reg = <0x13fbf000 0x1000>;
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml
index 5705bcf1fe47ef..27f79175c6789a 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml
@@ -29,6 +29,9 @@ properties:
   '#clock-cells':
     const: 1
 
+  '#reset-cells':
+    const: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml
index 57a1503d95feb3..95b6bdf99936cb 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml
@@ -37,6 +37,9 @@ properties:
   '#clock-cells':
     const: 1
 
+  '#reset-cells':
+    const: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
index f415845b38dd33..0b02378a3a0c88 100644
--- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
@@ -13,7 +13,6 @@ maintainers:
 properties:
   compatible:
     enum:
-      - allwinner,sun4i-a10-pll3-2x-clk
       - fixed-factor-clock
 
   "#clock-cells":
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
index 9fafcb0800691b..3cf404c9325a94 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-apq8064.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for APQ8064
+title: Qualcomm Global Clock & Reset Controller Binding for APQ8064/MSM8960
 
 allOf:
   - $ref: qcom,gcc.yaml#
@@ -23,11 +23,25 @@ description: |
 
 properties:
   compatible:
-    const: qcom,gcc-apq8064
+    oneOf:
+      - items:
+          - enum:
+              - qcom,gcc-apq8064
+              - qcom,gcc-msm8960
+          - const: syscon
+      - enum:
+          - qcom,gcc-apq8064
+          - qcom,gcc-msm8960
+        deprecated: true
+
+  thermal-sensor:
+    description: child tsens device
+    $ref: /schemas/thermal/qcom-tsens.yaml#
 
   nvmem-cells:
     minItems: 1
     maxItems: 2
+    deprecated: true
     description:
       Qualcomm TSENS (thermal sensor device) on some devices can
       be part of GCC and hence the TSENS properties can also be part
@@ -37,31 +51,39 @@ properties:
 
   nvmem-cell-names:
     minItems: 1
+    deprecated: true
     items:
       - const: calib
       - const: calib_backup
 
   '#thermal-sensor-cells':
     const: 1
+    deprecated: true
 
 required:
   - compatible
-  - nvmem-cells
-  - nvmem-cell-names
-  - '#thermal-sensor-cells'
 
 unevaluatedProperties: false
 
 examples:
   - |
     clock-controller@900000 {
-      compatible = "qcom,gcc-apq8064";
+      compatible = "qcom,gcc-apq8064", "syscon";
       reg = <0x00900000 0x4000>;
-      nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-      nvmem-cell-names = "calib", "calib_backup";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      #thermal-sensor-cells = <1>;
+
+      thermal-sensor {
+        compatible = "qcom,msm8960-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <0 178 4>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
index 98572b4a9b6087..21470f52ce369d 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
@@ -24,6 +24,9 @@ properties:
   '#clock-cells':
     const: 1
 
+  '#power-domain-cells':
+    const: 1
+
   '#reset-cells':
     const: 1
 
@@ -38,6 +41,7 @@ required:
   - compatible
   - reg
   - '#clock-cells'
+  - '#power-domain-cells'
   - '#reset-cells'
 
 additionalProperties: false
@@ -48,6 +52,7 @@ examples:
       compatible = "qcom,gcc-ipq8074";
       reg = <0x01800000 0x80000>;
       #clock-cells = <1>;
+      #power-domain-cells = <1>;
       #reset-cells = <1>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
index 5a5b2214f0cae6..005e0edd4609ac 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -22,16 +22,32 @@ properties:
     const: qcom,gcc-msm8996
 
   clocks:
+    minItems: 3
     items:
       - description: XO source
       - description: Second XO source
       - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: PCIe 1 PIPE clock (optional)
+      - description: PCIe 2 PIPE clock (optional)
+      - description: USB3 PIPE clock (optional)
+      - description: UFS RX symbol 0 clock (optional)
+      - description: UFS RX symbol 1 clock (optional)
+      - description: UFS TX symbol 0 clock (optional)
 
   clock-names:
+    minItems: 3
     items:
       - const: cxo
       - const: cxo2
       - const: sleep_clk
+      - const: pcie_0_pipe_clk_src
+      - const: pcie_1_pipe_clk_src
+      - const: pcie_2_pipe_clk_src
+      - const: usb3_phy_pipe_clk_src
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
 
   '#clock-cells':
     const: 1
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
index 6c45e0f854949f..6c78df0c46a904 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
@@ -44,7 +44,6 @@ properties:
       - qcom,gcc-msm8916
       - qcom,gcc-msm8939
       - qcom,gcc-msm8953
-      - qcom,gcc-msm8960
       - qcom,gcc-msm8974
       - qcom,gcc-msm8974pro
       - qcom,gcc-msm8974pro-ac
@@ -58,10 +57,10 @@ required:
 unevaluatedProperties: false
 
 examples:
-  # Example for GCC for MSM8960:
+  # Example for GCC for MSM8974:
   - |
     clock-controller@900000 {
-      compatible = "qcom,gcc-msm8960";
+      compatible = "qcom,gcc-msm8974";
       reg = <0x900000 0x4000>;
       #clock-cells = <1>;
       #reset-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
index d902f137ab1754..daf7906ebc409c 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
@@ -43,6 +43,9 @@ properties:
   '#reset-cells':
     const: 1
 
+  power-domains:
+    maxItems: 1
+
   '#power-domain-cells':
     const: 1
 
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
index 9d296b89a8d0bc..d63b45ad06e8a3 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
@@ -49,15 +49,86 @@ properties:
     const: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   clock-names:
-    const: xo
+    minItems: 1
+    maxItems: 2
 
 required:
   - compatible
   - '#clock-cells'
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,rpmcc-apq8060
+              - qcom,rpmcc-ipq806x
+              - qcom,rpmcc-msm8660
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pxo clock
+
+        clock-names:
+          items:
+            - const: pxo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,rpmcc-apq8064
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pxo clock
+            - description: cxo clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: cxo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,rpmcc-mdm9607
+              - qcom,rpmcc-msm8226
+              - qcom,rpmcc-msm8916
+              - qcom,rpmcc-msm8936
+              - qcom,rpmcc-msm8953
+              - qcom,rpmcc-msm8974
+              - qcom,rpmcc-msm8976
+              - qcom,rpmcc-msm8992
+              - qcom,rpmcc-msm8994
+              - qcom,rpmcc-msm8996
+              - qcom,rpmcc-msm8998
+              - qcom,rpmcc-qcm2290
+              - qcom,rpmcc-qcs404
+              - qcom,rpmcc-sdm660
+              - qcom,rpmcc-sm6115
+              - qcom,rpmcc-sm6125
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: xo clock
+
+        clock-names:
+          items:
+            - const: xo
+
 additionalProperties: false
 
 examples:
@@ -73,3 +144,13 @@ examples:
             };
         };
     };
+
+  - |
+    rpm {
+        clock-controller {
+            compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+            #clock-cells = <1>;
+            clocks = <&pxo_board>;
+            clock-names = "pxo";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
index 8880b834f264cd..d036675e0779ad 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
@@ -45,10 +45,9 @@ properties:
     description: |
       - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
         and a core clock reference, as defined in
-        <dt-bindings/clock/r9a0*-cpg.h>
+        <dt-bindings/clock/r9a0*-cpg.h>,
       - For module clocks, the two clock specifier cells must be "CPG_MOD" and
-        a module number, as defined in the <dt-bindings/clock/r9a07g0*-cpg.h> or
-        <dt-bindings/clock/r9a09g011-cpg.h>.
+        a module number, as defined in <dt-bindings/clock/r9a0*-cpg.h>.
     const: 2
 
   '#power-domain-cells':
@@ -62,7 +61,7 @@ properties:
   '#reset-cells':
     description:
       The single reset specifier cell must be the module number, as defined in
-      the <dt-bindings/clock/r9a07g0*-cpg.h> or <dt-bindings/clock/r9a09g011-cpg.h>.
+      <dt-bindings/clock/r9a0*-cpg.h>.
     const: 1
 
 required:
diff --git a/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml
new file mode 100644
index 00000000000000..5f747b0471cf0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/sprd,ums512-clk.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: UMS512 Soc clock controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,ums512-apahb-gate
+      - sprd,ums512-ap-clk
+      - sprd,ums512-aonapb-clk
+      - sprd,ums512-pmu-gate
+      - sprd,ums512-g0-pll
+      - sprd,ums512-g2-pll
+      - sprd,ums512-g3-pll
+      - sprd,ums512-gc-pll
+      - sprd,ums512-aon-gate
+      - sprd,ums512-audcpapb-gate
+      - sprd,ums512-audcpahb-gate
+      - sprd,ums512-gpu-clk
+      - sprd,ums512-mm-clk
+      - sprd,ums512-mm-gate-clk
+      - sprd,ums512-apapb-gate
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      The input parent clock(s) phandle for the clock, only list
+      fixed clocks which are declared in devicetree.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ext-26m
+      - const: ext-32k
+      - const: ext-4m
+      - const: rco-100m
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ap_clk: clock-controller@20200000 {
+      compatible = "sprd,ums512-ap-clk";
+      reg = <0x20200000 0x1000>;
+      clocks = <&ext_26m>;
+      clock-names = "ext-26m";
+      #clock-cells = <1>;
+    };
+...