diff options
Diffstat (limited to 'sound/pci/hda/patch_realtek.c')
| -rw-r--r-- | sound/pci/hda/patch_realtek.c | 66 |
1 files changed, 64 insertions, 2 deletions
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 80ba6c753c335..4f6dea23d8b25 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -342,6 +342,58 @@ static int alc_pin_mode_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_v .put = alc_pin_mode_put, \ .private_value = nid | (dir<<16) } +/* A switch control for ALC260 GPIO pins. Multiple GPIOs can be ganged + * together using a mask with more than one bit set. This control is + * currently used only by the ALC260 test model. At this stage they are not + * needed for any "production" models. + */ +#ifdef CONFIG_SND_DEBUG +static int alc_gpio_data_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} +static int alc_gpio_data_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + hda_nid_t nid = kcontrol->private_value & 0xffff; + unsigned char mask = (kcontrol->private_value >> 16) & 0xff; + long *valp = ucontrol->value.integer.value; + unsigned int val = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_GPIO_DATA,0x00); + + *valp = (val & mask) != 0; + return 0; +} +static int alc_gpio_data_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +{ + signed int change; + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + hda_nid_t nid = kcontrol->private_value & 0xffff; + unsigned char mask = (kcontrol->private_value >> 16) & 0xff; + long val = *ucontrol->value.integer.value; + unsigned int gpio_data = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_GPIO_DATA,0x00); + + /* Set/unset the masked GPIO bit(s) as needed */ + change = (val==0?0:mask) != (gpio_data & mask); + if (val==0) + gpio_data &= ~mask; + else + gpio_data |= mask; + snd_hda_codec_write(codec,nid,0,AC_VERB_SET_GPIO_DATA,gpio_data); + + return change; +} +#define ALC_GPIO_DATA_SWITCH(xname, nid, mask) \ + { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \ + .info = alc_gpio_data_info, \ + .get = alc_gpio_data_get, \ + .put = alc_gpio_data_put, \ + .private_value = nid | (mask<<16) } +#endif /* CONFIG_SND_DEBUG */ + /* * set up from the preset table */ @@ -2874,11 +2926,21 @@ static struct snd_kcontrol_new alc260_test_mixer[] = { HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT), HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT), HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT), + + /* Controls for GPIO pins, assuming they are configured as outputs */ + ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01), + ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02), + ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04), + ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08), + { } /* end */ }; static struct hda_verb alc260_test_init_verbs[] = { - /* Disable all GPIOs */ - {0x01, AC_VERB_SET_GPIO_MASK, 0}, + /* Enable all GPIOs as outputs with an initial value of 0 */ + {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f}, + {0x01, AC_VERB_SET_GPIO_DATA, 0x00}, + {0x01, AC_VERB_SET_GPIO_MASK, 0x0f}, + /* Enable retasking pins as output, initially without power amp */ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, |