diff options
Diffstat (limited to 'include/acpi/actbl.h')
| -rw-r--r-- | include/acpi/actbl.h | 400 |
1 files changed, 227 insertions, 173 deletions
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index ed53f842dad48f..e1a40135f707b1 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -1,6 +1,6 @@ /****************************************************************************** * - * Name: actbl.h - Table data structures defined in ACPI specification + * Name: actbl.h - Basic ACPI Table Definitions * *****************************************************************************/ @@ -45,66 +45,45 @@ #define __ACTBL_H__ /* - * Note about bitfields: The u8 type is used for bitfields in ACPI tables. - * This is the only type that is even remotely portable. Anything else is not - * portable, so do not use any other bitfield types. - */ - -/* - * Values for description table header signatures + * Values for description table header signatures. Useful because they make + * it more difficult to inadvertently type in the wrong signature. */ -#define RSDP_NAME "RSDP" -#define RSDP_SIG "RSD PTR " /* RSDT Pointer signature */ -#define APIC_SIG "APIC" /* Multiple APIC Description Table */ #define DSDT_SIG "DSDT" /* Differentiated System Description Table */ #define FADT_SIG "FACP" /* Fixed ACPI Description Table */ #define FACS_SIG "FACS" /* Firmware ACPI Control Structure */ #define PSDT_SIG "PSDT" /* Persistent System Description Table */ +#define RSDP_SIG "RSD PTR " /* Root System Description Pointer */ #define RSDT_SIG "RSDT" /* Root System Description Table */ #define XSDT_SIG "XSDT" /* Extended System Description Table */ #define SSDT_SIG "SSDT" /* Secondary System Description Table */ -#define SBST_SIG "SBST" /* Smart Battery Specification Table */ -#define SPIC_SIG "SPIC" /* IOSAPIC table */ -#define BOOT_SIG "BOOT" /* Boot table */ - -#define GL_OWNED 0x02 /* Ownership of global lock is bit 1 */ +#define RSDP_NAME "RSDP" /* - * Common table types. The base code can remain - * constant if the underlying tables are changed + * All tables and structures must be byte-packed to match the ACPI + * specification, since the tables are provided by the system BIOS */ -#define RSDT_DESCRIPTOR struct rsdt_descriptor_rev2 -#define XSDT_DESCRIPTOR struct xsdt_descriptor_rev2 -#define FACS_DESCRIPTOR struct facs_descriptor_rev2 -#define FADT_DESCRIPTOR struct fadt_descriptor_rev2 - #pragma pack(1) /* - * ACPI Version-independent tables + * These are the ACPI tables that are directly consumed by the subsystem. + * + * The RSDP and FACS do not use the common ACPI table header. All other ACPI + * tables use the header. * - * NOTE: The tables that are specific to ACPI versions (1.0, 2.0, etc.) - * are in separate files. + * Note about bitfields: The u8 type is used for bitfields in ACPI tables. + * This is the only type that is even remotely portable. Anything else is not + * portable, so do not use any other bitfield types. */ -struct rsdp_descriptor { /* Root System Descriptor Pointer */ - char signature[8]; /* ACPI signature, contains "RSD PTR " */ - u8 checksum; /* ACPI 1.0 checksum */ - char oem_id[6]; /* OEM identification */ - u8 revision; /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */ - u32 rsdt_physical_address; /* 32-bit physical address of the RSDT */ - u32 length; /* XSDT Length in bytes, including header */ - u64 xsdt_physical_address; /* 64-bit physical address of the XSDT */ - u8 extended_checksum; /* Checksum of entire table (ACPI 2.0) */ - char reserved[3]; /* Reserved, must be zero */ -}; -struct acpi_common_facs { /* Common FACS for internal use */ - u32 *global_lock; - u64 *firmware_waking_vector; - u8 vector_width; -}; +/******************************************************************************* + * + * ACPI Table Header. This common header is used by all tables except the + * RSDP and FACS. The define is used for direct inclusion of header into + * other ACPI tables + * + ******************************************************************************/ -#define ACPI_TABLE_HEADER_DEF /* ACPI common table header */ \ +#define ACPI_TABLE_HEADER_DEF \ char signature[4]; /* ASCII table signature */\ u32 length; /* Length of table in bytes, including this header */\ u8 revision; /* ACPI Specification minor version # */\ @@ -112,154 +91,239 @@ struct acpi_common_facs { /* Common FACS for internal use */ char oem_id[6]; /* ASCII OEM identification */\ char oem_table_id[8]; /* ASCII OEM table identification */\ u32 oem_revision; /* OEM revision number */\ - char asl_compiler_id [4]; /* ASCII ASL compiler vendor ID */\ + char asl_compiler_id[4]; /* ASCII ASL compiler vendor ID */\ u32 asl_compiler_revision; /* ASL compiler version */ -struct acpi_table_header { /* ACPI common table header */ +struct acpi_table_header { ACPI_TABLE_HEADER_DEF}; /* - * MADT values and structures + * GAS - Generic Address Structure (ACPI 2.0+) */ +struct acpi_generic_address { + u8 address_space_id; /* Address space where struct or register exists */ + u8 register_bit_width; /* Size in bits of given register */ + u8 register_bit_offset; /* Bit offset within the register */ + u8 access_width; /* Minimum Access size (ACPI 3.0) */ + u64 address; /* 64-bit address of struct or register */ +}; -/* Values for MADT PCATCompat */ +/******************************************************************************* + * + * RSDP - Root System Description Pointer (Signature is "RSD PTR ") + * + ******************************************************************************/ + +struct rsdp_descriptor { + char signature[8]; /* ACPI signature, contains "RSD PTR " */ + u8 checksum; /* ACPI 1.0 checksum */ + char oem_id[6]; /* OEM identification */ + u8 revision; /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */ + u32 rsdt_physical_address; /* 32-bit physical address of the RSDT */ + u32 length; /* Table length in bytes, including header (ACPI 2.0+) */ + u64 xsdt_physical_address; /* 64-bit physical address of the XSDT (ACPI 2.0+) */ + u8 extended_checksum; /* Checksum of entire table (ACPI 2.0+) */ + u8 reserved[3]; /* Reserved, must be zero */ +}; -#define DUAL_PIC 0 -#define MULTIPLE_APIC 1 +#define ACPI_RSDP_REV0_SIZE 20 /* Size of original ACPI 1.0 RSDP */ -/* Master MADT */ +/******************************************************************************* + * + * RSDT/XSDT - Root System Description Tables + * + ******************************************************************************/ -struct multiple_apic_table { - ACPI_TABLE_HEADER_DEF /* ACPI common table header */ - u32 local_apic_address; /* Physical address of local APIC */ +struct rsdt_descriptor { + ACPI_TABLE_HEADER_DEF u32 table_offset_entry[1]; /* Array of pointers to ACPI tables */ +}; + +struct xsdt_descriptor { + ACPI_TABLE_HEADER_DEF u64 table_offset_entry[1]; /* Array of pointers to ACPI tables */ +}; + +/******************************************************************************* + * + * FACS - Firmware ACPI Control Structure (FACS) + * + ******************************************************************************/ + +struct facs_descriptor { + char signature[4]; /* ASCII table signature */ + u32 length; /* Length of structure, in bytes */ + u32 hardware_signature; /* Hardware configuration signature */ + u32 firmware_waking_vector; /* 32-bit physical address of the Firmware Waking Vector */ + u32 global_lock; /* Global Lock for shared hardware resources */ /* Flags (32 bits) */ - u8 PCATcompat:1; /* 00: System also has dual 8259s */ + u8 S4bios_f:1; /* 00: S4BIOS support is present */ u8:7; /* 01-07: Reserved, must be zero */ u8 reserved1[3]; /* 08-31: Reserved, must be zero */ -}; -/* Values for Type in APIC_HEADER_DEF */ + u64 xfirmware_waking_vector; /* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */ + u8 version; /* Version of this table (ACPI 2.0+) */ + u8 reserved[31]; /* Reserved, must be zero */ +}; -#define APIC_PROCESSOR 0 -#define APIC_IO 1 -#define APIC_XRUPT_OVERRIDE 2 -#define APIC_NMI 3 -#define APIC_LOCAL_NMI 4 -#define APIC_ADDRESS_OVERRIDE 5 -#define APIC_IO_SAPIC 6 -#define APIC_LOCAL_SAPIC 7 -#define APIC_XRUPT_SOURCE 8 -#define APIC_RESERVED 9 /* 9 and greater are reserved */ +#define ACPI_GLOCK_PENDING 0x01 /* 00: Pending global lock ownership */ +#define ACPI_GLOCK_OWNED 0x02 /* 01: Global lock is owned */ /* - * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE) + * Common FACS - This is a version-independent FACS structure used for internal use only */ -#define APIC_HEADER_DEF /* Common APIC sub-structure header */\ - u8 type; \ - u8 length; - -struct apic_header { -APIC_HEADER_DEF}; - -/* Values for MPS INTI flags */ - -#define POLARITY_CONFORMS 0 -#define POLARITY_ACTIVE_HIGH 1 -#define POLARITY_RESERVED 2 -#define POLARITY_ACTIVE_LOW 3 - -#define TRIGGER_CONFORMS 0 -#define TRIGGER_EDGE 1 -#define TRIGGER_RESERVED 2 -#define TRIGGER_LEVEL 3 - -/* Common flag definitions (16 bits each) */ - -#define MPS_INTI_FLAGS \ - u8 polarity : 2; /* 00-01: Polarity of APIC I/O input signals */\ - u8 trigger_mode : 2; /* 02-03: Trigger mode of APIC input signals */\ - u8 : 4; /* 04-07: Reserved, must be zero */\ - u8 reserved1; /* 08-15: Reserved, must be zero */ - -#define LOCAL_APIC_FLAGS \ - u8 processor_enabled: 1; /* 00: Processor is usable if set */\ - u8 : 7; /* 01-07: Reserved, must be zero */\ - u8 reserved2; /* 08-15: Reserved, must be zero */ - -/* Sub-structures for MADT */ - -struct madt_processor_apic { - APIC_HEADER_DEF u8 processor_id; /* ACPI processor id */ - u8 local_apic_id; /* Processor's local APIC id */ - LOCAL_APIC_FLAGS}; - -struct madt_io_apic { - APIC_HEADER_DEF u8 io_apic_id; /* I/O APIC ID */ - u8 reserved; /* Reserved - must be zero */ - u32 address; /* APIC physical address */ - u32 interrupt; /* Global system interrupt where INTI - * lines start */ +struct acpi_common_facs { + u32 *global_lock; + u64 *firmware_waking_vector; + u8 vector_width; }; -struct madt_interrupt_override { - APIC_HEADER_DEF u8 bus; /* 0 - ISA */ - u8 source; /* Interrupt source (IRQ) */ - u32 interrupt; /* Global system interrupt */ - MPS_INTI_FLAGS}; +/******************************************************************************* + * + * FADT - Fixed ACPI Description Table (Signature "FACP") + * + ******************************************************************************/ + +/* Fields common to all versions of the FADT */ + +#define ACPI_FADT_COMMON \ + ACPI_TABLE_HEADER_DEF \ + u32 V1_firmware_ctrl; /* 32-bit physical address of FACS */ \ + u32 V1_dsdt; /* 32-bit physical address of DSDT */ \ + u8 reserved1; /* System Interrupt Model isn't used in ACPI 2.0*/ \ + u8 prefer_PM_profile; /* Conveys preferred power management profile to OSPM. */ \ + u16 sci_int; /* System vector of SCI interrupt */ \ + u32 smi_cmd; /* Port address of SMI command port */ \ + u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */ \ + u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */ \ + u8 S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */ \ + u8 pstate_cnt; /* Processor performance state control*/ \ + u32 V1_pm1a_evt_blk; /* Port address of Power Mgt 1a Event Reg Blk */ \ + u32 V1_pm1b_evt_blk; /* Port address of Power Mgt 1b Event Reg Blk */ \ + u32 V1_pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */ \ + u32 V1_pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */ \ + u32 V1_pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */ \ + u32 V1_pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */ \ + u32 V1_gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */ \ + u32 V1_gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */ \ + u8 pm1_evt_len; /* Byte length of ports at pm1_x_evt_blk */ \ + u8 pm1_cnt_len; /* Byte length of ports at pm1_x_cnt_blk */ \ + u8 pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */ \ + u8 pm_tm_len; /* Byte Length of ports at pm_tm_blk */ \ + u8 gpe0_blk_len; /* Byte Length of ports at gpe0_blk */ \ + u8 gpe1_blk_len; /* Byte Length of ports at gpe1_blk */ \ + u8 gpe1_base; /* Offset in gpe model where gpe1 events start */ \ + u8 cst_cnt; /* Support for the _CST object and C States change notification.*/ \ + u16 plvl2_lat; /* Worst case HW latency to enter/exit C2 state */ \ + u16 plvl3_lat; /* Worst case HW latency to enter/exit C3 state */ \ + u16 flush_size; /* Processor's memory cache line width, in bytes */ \ + u16 flush_stride; /* Number of flush strides that need to be read */ \ + u8 duty_offset; /* Processor's duty cycle index in processor's P_CNT reg*/ \ + u8 duty_width; /* Processor's duty cycle value bit width in P_CNT register.*/ \ + u8 day_alrm; /* Index to day-of-month alarm in RTC CMOS RAM */ \ + u8 mon_alrm; /* Index to month-of-year alarm in RTC CMOS RAM */ \ + u8 century; /* Index to century in RTC CMOS RAM */ \ + u16 iapc_boot_arch; /* IA-PC Boot Architecture Flags. See Table 5-10 for description*/ \ + u8 reserved2; /* Reserved, must be zero */ -struct madt_nmi_source { - APIC_HEADER_DEF MPS_INTI_FLAGS u32 interrupt; /* Global system interrupt */ +/* + * ACPI 2.0+ FADT + */ +struct fadt_descriptor { + ACPI_FADT_COMMON + /* Flags (32 bits) */ + u8 wb_invd:1; /* 00: The wbinvd instruction works properly */ + u8 wb_invd_flush:1; /* 01: The wbinvd flushes but does not invalidate */ + u8 proc_c1:1; /* 02: All processors support C1 state */ + u8 plvl2_up:1; /* 03: C2 state works on MP system */ + u8 pwr_button:1; /* 04: Power button is handled as a generic feature */ + u8 sleep_button:1; /* 05: Sleep button is handled as a generic feature, or not present */ + u8 fixed_rTC:1; /* 06: RTC wakeup stat not in fixed register space */ + u8 rtcs4:1; /* 07: RTC wakeup stat not possible from S4 */ + u8 tmr_val_ext:1; /* 08: tmr_val is 32 bits 0=24-bits */ + u8 dock_cap:1; /* 09: Docking supported */ + u8 reset_reg_sup:1; /* 10: System reset via the FADT RESET_REG supported */ + u8 sealed_case:1; /* 11: No internal expansion capabilities and case is sealed */ + u8 headless:1; /* 12: No local video capabilities or local input devices */ + u8 cpu_sw_sleep:1; /* 13: Must execute native instruction after writing SLP_TYPx register */ + + u8 pci_exp_wak:1; /* 14: System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */ + u8 use_platform_clock:1; /* 15: OSPM should use platform-provided timer (ACPI 3.0) */ + u8 S4rtc_sts_valid:1; /* 16: Contents of RTC_STS valid after S4 wake (ACPI 3.0) */ + u8 remote_power_on_capable:1; /* 17: System is compatible with remote power on (ACPI 3.0) */ + u8 force_apic_cluster_model:1; /* 18: All local APICs must use cluster model (ACPI 3.0) */ + u8 force_apic_physical_destination_mode:1; /* 19: all local x_aPICs must use physical dest mode (ACPI 3.0) */ + u8:4; /* 20-23: Reserved, must be zero */ + u8 reserved3; /* 24-31: Reserved, must be zero */ + + struct acpi_generic_address reset_register; /* Reset register address in GAS format */ + u8 reset_value; /* Value to write to the reset_register port to reset the system */ + u8 reserved4[3]; /* These three bytes must be zero */ + u64 xfirmware_ctrl; /* 64-bit physical address of FACS */ + u64 Xdsdt; /* 64-bit physical address of DSDT */ + struct acpi_generic_address xpm1a_evt_blk; /* Extended Power Mgt 1a acpi_event Reg Blk address */ + struct acpi_generic_address xpm1b_evt_blk; /* Extended Power Mgt 1b acpi_event Reg Blk address */ + struct acpi_generic_address xpm1a_cnt_blk; /* Extended Power Mgt 1a Control Reg Blk address */ + struct acpi_generic_address xpm1b_cnt_blk; /* Extended Power Mgt 1b Control Reg Blk address */ + struct acpi_generic_address xpm2_cnt_blk; /* Extended Power Mgt 2 Control Reg Blk address */ + struct acpi_generic_address xpm_tmr_blk; /* Extended Power Mgt Timer Ctrl Reg Blk address */ + struct acpi_generic_address xgpe0_blk; /* Extended General Purpose acpi_event 0 Reg Blk address */ + struct acpi_generic_address xgpe1_blk; /* Extended General Purpose acpi_event 1 Reg Blk address */ }; -struct madt_local_apic_nmi { - APIC_HEADER_DEF u8 processor_id; /* ACPI processor id */ - MPS_INTI_FLAGS u8 lint; /* LINTn to which NMI is connected */ +/* + * "Down-revved" ACPI 2.0 FADT descriptor + * Defined here to allow compiler to generate the length of the struct + */ +struct fadt_descriptor_rev2_minus { + ACPI_FADT_COMMON u32 flags; + struct acpi_generic_address reset_register; /* Reset register address in GAS format */ + u8 reset_value; /* Value to write to the reset_register port to reset the system. */ + u8 reserved7[3]; /* Reserved, must be zero */ }; -struct madt_address_override { - APIC_HEADER_DEF u16 reserved; /* Reserved, must be zero */ - u64 address; /* APIC physical address */ +/* + * ACPI 1.0 FADT + * Defined here to allow compiler to generate the length of the struct + */ +struct fadt_descriptor_rev1 { + ACPI_FADT_COMMON u32 flags; }; -struct madt_io_sapic { - APIC_HEADER_DEF u8 io_sapic_id; /* I/O SAPIC ID */ - u8 reserved; /* Reserved, must be zero */ - u32 interrupt_base; /* Glocal interrupt for SAPIC start */ - u64 address; /* SAPIC physical address */ -}; +/* FADT: Prefered Power Management Profiles */ -struct madt_local_sapic { - APIC_HEADER_DEF u8 processor_id; /* ACPI processor id */ - u8 local_sapic_id; /* SAPIC ID */ - u8 local_sapic_eid; /* SAPIC EID */ - u8 reserved[3]; /* Reserved, must be zero */ - LOCAL_APIC_FLAGS u32 processor_uID; /* Numeric UID - ACPI 3.0 */ - char processor_uIDstring[1]; /* String UID - ACPI 3.0 */ -}; +#define PM_UNSPECIFIED 0 +#define PM_DESKTOP 1 +#define PM_MOBILE 2 +#define PM_WORKSTATION 3 +#define PM_ENTERPRISE_SERVER 4 +#define PM_SOHO_SERVER 5 +#define PM_APPLIANCE_PC 6 -struct madt_interrupt_source { - APIC_HEADER_DEF MPS_INTI_FLAGS u8 interrupt_type; /* 1=PMI, 2=INIT, 3=corrected */ - u8 processor_id; /* Processor ID */ - u8 processor_eid; /* Processor EID */ - u8 io_sapic_vector; /* Vector value for PMI interrupts */ - u32 interrupt; /* Global system interrupt */ - u32 flags; /* Interrupt Source Flags */ -}; +/* FADT: Boot Arch Flags */ -/* - * Smart Battery - */ -struct smart_battery_table { - ACPI_TABLE_HEADER_DEF u32 warning_level; - u32 low_level; - u32 critical_level; -}; +#define BAF_LEGACY_DEVICES 0x0001 +#define BAF_8042_KEYBOARD_CONTROLLER 0x0002 + +#define FADT2_REVISION_ID 3 +#define FADT2_MINUS_REVISION_ID 2 + +/* Reset to default packing */ #pragma pack() /* + * This macro is temporary until the table bitfield flag definitions + * are removed and replaced by a Flags field. + */ +#define ACPI_FLAG_OFFSET(d,f,o) (u8) (ACPI_OFFSET (d,f) + \ + sizeof(((d *)0)->f) + o) +/* + * Get the remaining ACPI tables + */ +#include "actbl1.h" + +/* * ACPI Table information. We save the table address, length, * and type of memory allocation (mapped or allocated) for each * table for 1) when we exit, and 2) if a new table is installed @@ -290,27 +354,17 @@ struct acpi_table_support { u8 flags; }; -/* - * Get the ACPI version-specific tables - */ -#include "actbl1.h" /* Acpi 1.0 table definitions */ -#include "actbl2.h" /* Acpi 2.0 table definitions */ - extern u8 acpi_fadt_is_v1; /* is set to 1 if FADT is revision 1, * needed for certain workarounds */ +/* Macros used to generate offsets to specific table fields */ -#pragma pack(1) -/* - * High performance timer - */ -struct hpet_table { - ACPI_TABLE_HEADER_DEF u32 hardware_id; - struct acpi_generic_address base_address; - u8 hpet_number; - u16 clock_tick; - u8 attributes; -}; +#define ACPI_FACS_OFFSET(f) (u8) ACPI_OFFSET (struct facs_descriptor,f) +#define ACPI_FADT_OFFSET(f) (u8) ACPI_OFFSET (struct fadt_descriptor, f) +#define ACPI_GAS_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_generic_address,f) +#define ACPI_HDR_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_header,f) +#define ACPI_RSDP_OFFSET(f) (u8) ACPI_OFFSET (struct rsdp_descriptor,f) -#pragma pack() +#define ACPI_FADT_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct fadt_descriptor,f,o) +#define ACPI_FACS_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct facs_descriptor,f,o) #endif /* __ACTBL_H__ */ |