diff options
Diffstat (limited to 'drivers/net/via-rhine.c')
| -rw-r--r-- | drivers/net/via-rhine.c | 207 |
1 files changed, 83 insertions, 124 deletions
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 98b6f3207d3da..ae971080e2e43 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -25,117 +25,13 @@ version. He may or may not be interested in bug reports on this code. You can find his versions at: http://www.scyld.com/network/via-rhine.html - - - Linux kernel version history: - - LK1.1.0: - - Jeff Garzik: softnet 'n stuff - - LK1.1.1: - - Justin Guyett: softnet and locking fixes - - Jeff Garzik: use PCI interface - - LK1.1.2: - - Urban Widmark: minor cleanups, merges from Becker 1.03a/1.04 versions - - LK1.1.3: - - Urban Widmark: use PCI DMA interface (with thanks to the eepro100.c - code) update "Theory of Operation" with - softnet/locking changes - - Dave Miller: PCI DMA and endian fixups - - Jeff Garzik: MOD_xxx race fixes, updated PCI resource allocation - - LK1.1.4: - - Urban Widmark: fix gcc 2.95.2 problem and - remove writel's to fixed address 0x7c - - LK1.1.5: - - Urban Widmark: mdio locking, bounce buffer changes - merges from Beckers 1.05 version - added netif_running_on/off support - - LK1.1.6: - - Urban Widmark: merges from Beckers 1.08b version (VT6102 + mdio) - set netif_running_on/off on startup, del_timer_sync - - LK1.1.7: - - Manfred Spraul: added reset into tx_timeout - - LK1.1.9: - - Urban Widmark: merges from Beckers 1.10 version - (media selection + eeprom reload) - - David Vrabel: merges from D-Link "1.11" version - (disable WOL and PME on startup) - - LK1.1.10: - - Manfred Spraul: use "singlecopy" for unaligned buffers - don't allocate bounce buffers for !ReqTxAlign cards - - LK1.1.11: - - David Woodhouse: Set dev->base_addr before the first time we call - wait_for_reset(). It's a lot happier that way. - Free np->tx_bufs only if we actually allocated it. - - LK1.1.12: - - Martin Eriksson: Allow Memory-Mapped IO to be enabled. - - LK1.1.13 (jgarzik): - - Add ethtool support - - Replace some MII-related magic numbers with constants - - LK1.1.14 (Ivan G.): - - fixes comments for Rhine-III - - removes W_MAX_TIMEOUT (unused) - - adds HasDavicomPhy for Rhine-I (basis: linuxfet driver; my card - is R-I and has Davicom chip, flag is referenced in kernel driver) - - sends chip_id as a parameter to wait_for_reset since np is not - initialized on first call - - changes mmio "else if (chip_id==VT6102)" to "else" so it will work - for Rhine-III's (documentation says same bit is correct) - - transmit frame queue message is off by one - fixed - - adds IntrNormalSummary to "Something Wicked" exclusion list - so normal interrupts will not trigger the message (src: Donald Becker) - (Roger Luethi) - - show confused chip where to continue after Tx error - - location of collision counter is chip specific - - allow selecting backoff algorithm (module parameter) - - LK1.1.15 (jgarzik): - - Use new MII lib helper generic_mii_ioctl - - LK1.1.16 (Roger Luethi) - - Etherleak fix - - Handle Tx buffer underrun - - Fix bugs in full duplex handling - - New reset code uses "force reset" cmd on Rhine-II - - Various clean ups - - LK1.1.17 (Roger Luethi) - - Fix race in via_rhine_start_tx() - - On errors, wait for Tx engine to turn off before scavenging - - Handle Tx descriptor write-back race on Rhine-II - - Force flushing for PCI posted writes - - More reset code changes - - LK1.1.18 (Roger Luethi) - - No filtering multicast in promisc mode (Edward Peng) - - Fix for Rhine-I Tx timeouts - - LK1.1.19 (Roger Luethi) - - Increase Tx threshold for unspecified errors - - LK1.2.0-2.6 (Roger Luethi) - - Massive clean-up - - Rewrite PHY, media handling (remove options, full_duplex, backoff) - - Fix Tx engine race for good - - Craig Brind: Zero padded aligned buffers for short packets. + [link no longer provides useful info -jgarzik] */ #define DRV_NAME "via-rhine" -#define DRV_VERSION "1.2.0-2.6" -#define DRV_RELDATE "June-10-2004" +#define DRV_VERSION "1.4.1" +#define DRV_RELDATE "July-24-2006" /* A few user-configurable values. @@ -148,6 +44,10 @@ static int max_interrupt_work = 20; Setting to > 1518 effectively disables this feature. */ static int rx_copybreak; +/* Work-around for broken BIOSes: they are unable to get the chip back out of + power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */ +static int avoid_D3; + /* * In case you are looking for 'options[]' or 'full_duplex[]', they * are gone. Use ethtool(8) instead. @@ -167,7 +67,11 @@ static const int multicast_filter_limit = 32; There are no ill effects from too-large receive rings. */ #define TX_RING_SIZE 16 #define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ +#ifdef CONFIG_VIA_RHINE_NAPI +#define RX_RING_SIZE 64 +#else #define RX_RING_SIZE 16 +#endif /* Operational parameters that usually are not changed. */ @@ -220,9 +124,11 @@ MODULE_LICENSE("GPL"); module_param(max_interrupt_work, int, 0); module_param(debug, int, 0); module_param(rx_copybreak, int, 0); +module_param(avoid_D3, bool, 0); MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt"); MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)"); MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)"); /* Theory of Operation @@ -356,12 +262,11 @@ enum rhine_quirks { /* Beware of PCI posted writes */ #define IOSYNC do { ioread8(ioaddr + StationAddr); } while (0) -static struct pci_device_id rhine_pci_tbl[] = -{ - {0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT86C100A */ - {0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT6102 */ - {0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* 6105{,L,LOM} */ - {0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT6105M */ +static const struct pci_device_id rhine_pci_tbl[] = { + { 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, }, /* VT86C100A */ + { 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6102 */ + { 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, }, /* 6105{,L,LOM} */ + { 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6105M */ { } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, rhine_pci_tbl); @@ -501,7 +406,7 @@ static void rhine_tx_timeout(struct net_device *dev); static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev); static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs); static void rhine_tx(struct net_device *dev); -static void rhine_rx(struct net_device *dev); +static int rhine_rx(struct net_device *dev, int limit); static void rhine_error(struct net_device *dev, int intr_status); static void rhine_set_rx_mode(struct net_device *dev); static struct net_device_stats *rhine_get_stats(struct net_device *dev); @@ -669,6 +574,32 @@ static void rhine_poll(struct net_device *dev) } #endif +#ifdef CONFIG_VIA_RHINE_NAPI +static int rhine_napipoll(struct net_device *dev, int *budget) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + int done, limit = min(dev->quota, *budget); + + done = rhine_rx(dev, limit); + *budget -= done; + dev->quota -= done; + + if (done < limit) { + netif_rx_complete(dev); + + iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | + IntrRxDropped | IntrRxNoBuf | IntrTxAborted | + IntrTxDone | IntrTxError | IntrTxUnderrun | + IntrPCIErr | IntrStatsMax | IntrLinkChange, + ioaddr + IntrEnable); + return 0; + } + else + return 1; +} +#endif + static void rhine_hw_init(struct net_device *dev, long pioaddr) { struct rhine_private *rp = netdev_priv(dev); @@ -849,6 +780,10 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = rhine_poll; #endif +#ifdef CONFIG_VIA_RHINE_NAPI + dev->poll = rhine_napipoll; + dev->weight = 64; +#endif if (rp->quirks & rqRhineI) dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM; @@ -894,6 +829,9 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, } } rp->mii_if.phy_id = phy_id; + if (debug > 1 && avoid_D3) + printk(KERN_INFO "%s: No D3 power state at shutdown.\n", + dev->name); return 0; @@ -1119,6 +1057,8 @@ static void init_registers(struct net_device *dev) rhine_set_rx_mode(dev); + netif_poll_enable(dev); + /* Enable interrupts by setting the interrupt mask. */ iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | IntrRxDropped | IntrRxNoBuf | IntrTxAborted | @@ -1373,8 +1313,18 @@ static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs * dev->name, intr_status); if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped | - IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) - rhine_rx(dev); + IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) { +#ifdef CONFIG_VIA_RHINE_NAPI + iowrite16(IntrTxAborted | + IntrTxDone | IntrTxError | IntrTxUnderrun | + IntrPCIErr | IntrStatsMax | IntrLinkChange, + ioaddr + IntrEnable); + + netif_rx_schedule(dev); +#else + rhine_rx(dev, RX_RING_SIZE); +#endif + } if (intr_status & (IntrTxErrSummary | IntrTxDone)) { if (intr_status & IntrTxErrSummary) { @@ -1472,13 +1422,12 @@ static void rhine_tx(struct net_device *dev) spin_unlock(&rp->lock); } -/* This routine is logically part of the interrupt handler, but isolated - for clarity and better register allocation. */ -static void rhine_rx(struct net_device *dev) +/* Process up to limit frames from receive ring */ +static int rhine_rx(struct net_device *dev, int limit) { struct rhine_private *rp = netdev_priv(dev); + int count; int entry = rp->cur_rx % RX_RING_SIZE; - int boguscnt = rp->dirty_rx + RX_RING_SIZE - rp->cur_rx; if (debug > 4) { printk(KERN_DEBUG "%s: rhine_rx(), entry %d status %8.8x.\n", @@ -1487,16 +1436,18 @@ static void rhine_rx(struct net_device *dev) } /* If EOP is set on the next entry, it's a new packet. Send it up. */ - while (!(rp->rx_head_desc->rx_status & cpu_to_le32(DescOwn))) { + for (count = 0; count < limit; ++count) { struct rx_desc *desc = rp->rx_head_desc; u32 desc_status = le32_to_cpu(desc->rx_status); int data_size = desc_status >> 16; + if (desc_status & DescOwn) + break; + if (debug > 4) printk(KERN_DEBUG "rhine_rx() status is %8.8x.\n", desc_status); - if (--boguscnt < 0) - break; + if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) { if ((desc_status & RxWholePkt) != RxWholePkt) { printk(KERN_WARNING "%s: Oversized Ethernet " @@ -1565,7 +1516,11 @@ static void rhine_rx(struct net_device *dev) PCI_DMA_FROMDEVICE); } skb->protocol = eth_type_trans(skb, dev); +#ifdef CONFIG_VIA_RHINE_NAPI + netif_receive_skb(skb); +#else netif_rx(skb); +#endif dev->last_rx = jiffies; rp->stats.rx_bytes += pkt_len; rp->stats.rx_packets++; @@ -1592,6 +1547,8 @@ static void rhine_rx(struct net_device *dev) } rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn); } + + return count; } /* @@ -1881,6 +1838,7 @@ static int rhine_close(struct net_device *dev) spin_lock_irq(&rp->lock); netif_stop_queue(dev); + netif_poll_disable(dev); if (debug > 1) printk(KERN_DEBUG "%s: Shutting down ethercard, " @@ -1962,7 +1920,8 @@ static void rhine_shutdown (struct pci_dev *pdev) } /* Hit power state D3 (sleep) */ - iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW); + if (!avoid_D3) + iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW); /* TODO: Check use of pci_enable_wake() */ |