[PATCH] /proc/<pid>/numa_maps to show on which nodes pages reside

This patch was recently discussed on linux-mm:
http://marc.theaimsgroup.com/?t=112085728500002&r=1&w=2

I inherited a large code base from Ray for page migration.  There was a
small patch in there that I find to be very useful since it allows the
display of the locality of the pages in use by a process.  I reworked that
patch and came up with a /proc/<pid>/numa_maps that gives more information
about the vma's of a process.  numa_maps is indexes by the start address
found in /proc/<pid>/maps.  F.e.  with this patch you can see the page use
of the "getty" process:

margin:/proc/12008 # cat maps
00000000-00004000 r--p 00000000 00:00 0
2000000000000000-200000000002c000 r-xp 00000000 08:04 516                /lib/ld-2.3.3.so
2000000000038000-2000000000040000 rw-p 00028000 08:04 516                /lib/ld-2.3.3.so
2000000000040000-2000000000044000 rw-p 2000000000040000 00:00 0
2000000000058000-2000000000260000 r-xp 00000000 08:04 54707842           /lib/tls/libc.so.6.1
2000000000260000-2000000000268000 ---p 00208000 08:04 54707842           /lib/tls/libc.so.6.1
2000000000268000-2000000000274000 rw-p 00200000 08:04 54707842           /lib/tls/libc.so.6.1
2000000000274000-2000000000280000 rw-p 2000000000274000 00:00 0
2000000000280000-20000000002b4000 r--p 00000000 08:04 9126923            /usr/lib/locale/en_US.utf8/LC_CTYPE
2000000000300000-2000000000308000 r--s 00000000 08:04 60071467           /usr/lib/gconv/gconv-modules.cache
2000000000318000-2000000000328000 rw-p 2000000000318000 00:00 0
4000000000000000-4000000000008000 r-xp 00000000 08:04 29576399           /sbin/mingetty
6000000000004000-6000000000008000 rw-p 00004000 08:04 29576399           /sbin/mingetty
6000000000008000-600000000002c000 rw-p 6000000000008000 00:00 0          [heap]
60000fff7fffc000-60000fff80000000 rw-p 60000fff7fffc000 00:00 0
60000ffffff44000-60000ffffff98000 rw-p 60000ffffff44000 00:00 0          [stack]
a000000000000000-a000000000020000 ---p 00000000 00:00 0                  [vdso]

cat numa_maps
2000000000000000 default MaxRef=43 Pages=11 Mapped=11 N0=4 N1=3 N2=2 N3=2
2000000000038000 default MaxRef=1 Pages=2 Mapped=2 Anon=2 N0=2
2000000000040000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
2000000000058000 default MaxRef=43 Pages=61 Mapped=61 N0=14 N1=15 N2=16 N3=16
2000000000268000 default MaxRef=1 Pages=2 Mapped=2 Anon=2 N0=2
2000000000274000 default MaxRef=1 Pages=3 Mapped=3 Anon=3 N0=3
2000000000280000 default MaxRef=8 Pages=3 Mapped=3 N0=3
2000000000300000 default MaxRef=8 Pages=2 Mapped=2 N0=2
2000000000318000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N2=1
4000000000000000 default MaxRef=6 Pages=2 Mapped=2 N1=2
6000000000004000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
6000000000008000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
60000fff7fffc000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
60000ffffff44000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1

getty uses ld.so.  The first vma is the code segment which is used by 43
other processes and the pages are evenly distributed over the 4 nodes.

The second vma is the process specific data portion for ld.so.  This is
only one page.

The display format is:

<startaddress>	 Links to information in /proc/<pid>/map
<memory policy>  This can be "default" "interleave={}", "prefer=<node>" or "bind={<zones>}"
MaxRef=		<maximum reference to a page in this vma>
Pages=		<Nr of pages in use>
Mapped=		<Nr of pages with mapcount >
Anon=		<nr of anonymous pages>
Nx=		<Nr of pages on Node x>

The content of the proc-file is self-evident.  If this would be tied into
the sparsemem system then the contents of this file would not be too
useful.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 35 insertions, 0 deletions

diff --git a/fs/proc/base.c b/fs/proc/base.c
index 491f2d9f89acd..b796bf90a0b19 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -65,6 +65,7 @@ enum pid_directory_inos {
 	PROC_TGID_STAT,
 	PROC_TGID_STATM,
 	PROC_TGID_MAPS,
+	PROC_TGID_NUMA_MAPS,
 	PROC_TGID_MOUNTS,
 	PROC_TGID_WCHAN,
 #ifdef CONFIG_SCHEDSTATS
@@ -102,6 +103,7 @@ enum pid_directory_inos {
 	PROC_TID_STAT,
 	PROC_TID_STATM,
 	PROC_TID_MAPS,
+	PROC_TID_NUMA_MAPS,
 	PROC_TID_MOUNTS,
 	PROC_TID_WCHAN,
 #ifdef CONFIG_SCHEDSTATS
@@ -144,6 +146,9 @@ static struct pid_entry tgid_base_stuff[] = {
 	E(PROC_TGID_STAT,      "stat",    S_IFREG|S_IRUGO),
 	E(PROC_TGID_STATM,     "statm",   S_IFREG|S_IRUGO),
 	E(PROC_TGID_MAPS,      "maps",    S_IFREG|S_IRUGO),
+#ifdef CONFIG_NUMA
+	E(PROC_TGID_NUMA_MAPS, "numa_maps", S_IFREG|S_IRUGO),
+#endif
 	E(PROC_TGID_MEM,       "mem",     S_IFREG|S_IRUSR|S_IWUSR),
 #ifdef CONFIG_SECCOMP
 	E(PROC_TGID_SECCOMP,   "seccomp", S_IFREG|S_IRUSR|S_IWUSR),
@@ -180,6 +185,9 @@ static struct pid_entry tid_base_stuff[] = {
 	E(PROC_TID_STAT,       "stat",    S_IFREG|S_IRUGO),
 	E(PROC_TID_STATM,      "statm",   S_IFREG|S_IRUGO),
 	E(PROC_TID_MAPS,       "maps",    S_IFREG|S_IRUGO),
+#ifdef CONFIG_NUMA
+	E(PROC_TID_NUMA_MAPS,  "numa_maps",    S_IFREG|S_IRUGO),
+#endif
 	E(PROC_TID_MEM,        "mem",     S_IFREG|S_IRUSR|S_IWUSR),
 #ifdef CONFIG_SECCOMP
 	E(PROC_TID_SECCOMP,    "seccomp", S_IFREG|S_IRUSR|S_IWUSR),
@@ -515,6 +523,27 @@ static struct file_operations proc_maps_operations = {
 	.release	= seq_release,
 };
 
+#ifdef CONFIG_NUMA
+extern struct seq_operations proc_pid_numa_maps_op;
+static int numa_maps_open(struct inode *inode, struct file *file)
+{
+	struct task_struct *task = proc_task(inode);
+	int ret = seq_open(file, &proc_pid_numa_maps_op);
+	if (!ret) {
+		struct seq_file *m = file->private_data;
+		m->private = task;
+	}
+	return ret;
+}
+
+static struct file_operations proc_numa_maps_operations = {
+	.open		= numa_maps_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+#endif
+
 extern struct seq_operations mounts_op;
 static int mounts_open(struct inode *inode, struct file *file)
 {
@@ -1524,6 +1553,12 @@ static struct dentry *proc_pident_lookup(struct inode *dir,
 		case PROC_TGID_MAPS:
 			inode->i_fop = &proc_maps_operations;
 			break;
+#ifdef CONFIG_NUMA
+		case PROC_TID_NUMA_MAPS:
+		case PROC_TGID_NUMA_MAPS:
+			inode->i_fop = &proc_numa_maps_operations;
+			break;
+#endif
 		case PROC_TID_MEM:
 		case PROC_TGID_MEM:
 			inode->i_op = &proc_mem_inode_operations;