aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/libata-core.c
diff options
context:
space:
mode:
authorTejun Heo <htejun@gmail.com>2006-05-31 18:27:48 +0900
committerTejun Heo <htejun@gmail.com>2006-05-31 18:27:48 +0900
commitf5914a461eb9703773226a0813f6ffcae10c0861 (patch)
tree3441af53250530c3135a8fa55f06dd7bc62da037 /drivers/scsi/libata-core.c
parentd7bb4cc7575929a60b0a718daa1bce87bea9a9cc (diff)
downloadlinux-f5914a461eb9703773226a0813f6ffcae10c0861.tar.gz
[PATCH] libata-hp-prep: add prereset() method and implement ata_std_prereset()
With hotplug, every reset might be a probing reset and thus something similar to probe_init() is needed. prereset() method is called before a series of resets to a port and is the counterpart of postreset(). prereset() can tell EH to use different type of reset or skip reset by modifying ehc->i.action. This patch also implements ata_std_prereset(). Most controllers should be able to use this function directly or with some wrapping. After hotplug, different controllers need different actions to resume the PHY and detect the newly attached device. Controllers can be categorized as follows. * Controllers which can wait for the first D2H FIS after hotplug. Note that if the waiting is implemented by polling TF status, there needs to be a way to set BSY on PHY status change. It can be implemented by hardware or with the help of the driver. * Controllers which can wait for the first D2H FIS after sending COMRESET. These controllers need to issue COMRESET to wait for the first FIS. Note that the received D2H FIS could be the first D2H FIS after POR (power-on-reset) or D2H FIS in response to the COMRESET. Some controllers use COMRESET as TF status synchronization point and clear TF automatically (sata_sil). * Controllers which cannot wait for the first D2H FIS reliably. Blindly issuing SRST to spinning-up device often results in command issue failure or timeout, causing extended delay. For these controllers, ata_std_prereset() explicitly waits ATA_SPINUP_WAIT (currently 8s) to give newly attached device time to spin up, then issues reset. Note that failing to getting ready in ATA_SPINUP_WAIT is not critical. libata will retry. So, the timeout needs to be long enough to spin up most devices. LLDDs can tell ata_std_prereset() which of above action is needed with ATA_FLAG_HRST_TO_RESUME and ATA_FLAG_SKIP_D2H_BSY flags. These flags are PHY-specific property and will be moved to ata_link later. While at it, this patch unifies function typedef's such that they all have named arguments. Signed-off-by: Tejun Heo <htejun@gmail.com>
Diffstat (limited to 'drivers/scsi/libata-core.c')
-rw-r--r--drivers/scsi/libata-core.c85
1 files changed, 85 insertions, 0 deletions
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 4823ecefb8a15..2531a701d6e99 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -2525,6 +2525,90 @@ int sata_phy_resume(struct ata_port *ap, const unsigned long *params)
return sata_phy_debounce(ap, params);
}
+static void ata_wait_spinup(struct ata_port *ap)
+{
+ struct ata_eh_context *ehc = &ap->eh_context;
+ unsigned long end, secs;
+ int rc;
+
+ /* first, debounce phy if SATA */
+ if (ap->cbl == ATA_CBL_SATA) {
+ rc = sata_phy_debounce(ap, sata_deb_timing_eh);
+
+ /* if debounced successfully and offline, no need to wait */
+ if ((rc == 0 || rc == -EOPNOTSUPP) && ata_port_offline(ap))
+ return;
+ }
+
+ /* okay, let's give the drive time to spin up */
+ end = ehc->i.hotplug_timestamp + ATA_SPINUP_WAIT * HZ / 1000;
+ secs = ((end - jiffies) + HZ - 1) / HZ;
+
+ if (time_after(jiffies, end))
+ return;
+
+ if (secs > 5)
+ ata_port_printk(ap, KERN_INFO, "waiting for device to spin up "
+ "(%lu secs)\n", secs);
+
+ schedule_timeout_uninterruptible(end - jiffies);
+}
+
+/**
+ * ata_std_prereset - prepare for reset
+ * @ap: ATA port to be reset
+ *
+ * @ap is about to be reset. Initialize it.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_std_prereset(struct ata_port *ap)
+{
+ struct ata_eh_context *ehc = &ap->eh_context;
+ const unsigned long *timing;
+ int rc;
+
+ /* hotplug? */
+ if (ehc->i.flags & ATA_EHI_HOTPLUGGED) {
+ if (ap->flags & ATA_FLAG_HRST_TO_RESUME)
+ ehc->i.action |= ATA_EH_HARDRESET;
+ if (ap->flags & ATA_FLAG_SKIP_D2H_BSY)
+ ata_wait_spinup(ap);
+ }
+
+ /* if we're about to do hardreset, nothing more to do */
+ if (ehc->i.action & ATA_EH_HARDRESET)
+ return 0;
+
+ /* if SATA, resume phy */
+ if (ap->cbl == ATA_CBL_SATA) {
+ if (ap->flags & ATA_FLAG_LOADING)
+ timing = sata_deb_timing_boot;
+ else
+ timing = sata_deb_timing_eh;
+
+ rc = sata_phy_resume(ap, timing);
+ if (rc && rc != -EOPNOTSUPP) {
+ /* phy resume failed */
+ ata_port_printk(ap, KERN_WARNING, "failed to resume "
+ "link for reset (errno=%d)\n", rc);
+ return rc;
+ }
+ }
+
+ /* Wait for !BSY if the controller can wait for the first D2H
+ * Reg FIS and we don't know that no device is attached.
+ */
+ if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_port_offline(ap))
+ ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+
+ return 0;
+}
+
/**
* ata_std_probeinit - initialize probing
* @ap: port to be probed
@@ -5840,6 +5924,7 @@ EXPORT_SYMBOL_GPL(sata_phy_reset);
EXPORT_SYMBOL_GPL(__sata_phy_reset);
EXPORT_SYMBOL_GPL(ata_bus_reset);
EXPORT_SYMBOL_GPL(ata_std_probeinit);
+EXPORT_SYMBOL_GPL(ata_std_prereset);
EXPORT_SYMBOL_GPL(ata_std_softreset);
EXPORT_SYMBOL_GPL(sata_std_hardreset);
EXPORT_SYMBOL_GPL(ata_std_postreset);