Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series has a huge amount of churn because it pulls in Mauro's doc
  update changing all our txt files to rst ones.

  Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
  zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
  some other minor updates.

  The major core change is Hannes moving functions out of the aacraid
  driver and into the core"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
  scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
  scsi: ufs: Do not rely on prefetched data
  scsi: dc395x: remove dc395x_bios_param
  scsi: libiscsi: Fix error count for active session
  scsi: hpsa: correct race condition in offload enabled
  scsi: message: fusion: Replace zero-length array with flexible-array member
  scsi: qedi: Add PCI shutdown handler support
  scsi: qedi: Add MFW error recovery process
  scsi: ufs: Enable block layer runtime PM for well-known logical units
  scsi: ufs-qcom: Override devfreq parameters
  scsi: ufshcd: Let vendor override devfreq parameters
  scsi: ufshcd: Update the set frequency to devfreq
  scsi: ufs: Resume ufs host before accessing ufs device
  scsi: ufs-mediatek: customize the delay for enabling host
  scsi: ufs: make HCE polling more compact to improve initialization latency
  scsi: ufs: allow custom delay prior to host enabling
  scsi: ufs-mediatek: use common delay function
  scsi: ufs: introduce common and flexible delay function
  scsi: ufs: use an enum for host capabilities
  scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
  ...

1 files changed, 21 insertions, 30 deletions

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 1b6eaf8da5fa4..17feff174f574 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -33,7 +33,7 @@ config SCSI
 	  Channel, and FireWire storage.
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>.
+	  <file:Documentation/scsi/scsi.rst>.
 	  The module will be called scsi_mod.
 
 	  However, do not compile this as a module if your root file system
@@ -79,7 +79,7 @@ config BLK_DEV_SD
 	  CD-ROMs.
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>.
+	  <file:Documentation/scsi/scsi.rst>.
 	  The module will be called sd_mod.
 
 	  Do not compile this driver as a module if your root file system
@@ -94,11 +94,11 @@ config CHR_DEV_ST
 	  If you want to use a SCSI tape drive under Linux, say Y and read the
 	  SCSI-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>, and
-	  <file:Documentation/scsi/st.txt> in the kernel source.  This is NOT
+	  <file:Documentation/scsi/st.rst> in the kernel source.  This is NOT
 	  for SCSI CD-ROMs.
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>. The module will be called st.
+	  <file:Documentation/scsi/scsi.rst>. The module will be called st.
 
 config BLK_DEV_SR
 	tristate "SCSI CDROM support"
@@ -112,18 +112,9 @@ config BLK_DEV_SR
 	  Make sure to say Y or M to "ISO 9660 CD-ROM file system support".
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>.
+	  <file:Documentation/scsi/scsi.rst>.
 	  The module will be called sr_mod.
 
-config BLK_DEV_SR_VENDOR
-	bool "Enable vendor-specific extensions (for SCSI CDROM)"
-	depends on BLK_DEV_SR
-	help
-	  This enables the usage of vendor specific SCSI commands. This is
-	  required to support multisession CDs with old NEC/TOSHIBA cdrom
-	  drives (and HP Writers). If you have such a drive and get the first
-	  session only, try saying Y here; everybody else says N.
-
 config CHR_DEV_SG
 	tristate "SCSI generic support"
 	depends on SCSI
@@ -142,10 +133,10 @@ config CHR_DEV_SG
 	  quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
 	  For other devices, it's possible that you'll have to write the
 	  driver software yourself. Please read the file
-	  <file:Documentation/scsi/scsi-generic.txt> for more information.
+	  <file:Documentation/scsi/scsi-generic.rst> for more information.
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>. The module will be called sg.
+	  <file:Documentation/scsi/scsi.rst>. The module will be called sg.
 
 	  If unsure, say N.
 
@@ -158,12 +149,12 @@ config CHR_DEV_SCH
 	  don't need this for those tiny 6-slot cdrom changers.  Media
 	  changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
 	  If you have such hardware and want to use it with linux, say Y
-	  here.  Check <file:Documentation/scsi/scsi-changer.txt> for details.
+	  here.  Check <file:Documentation/scsi/scsi-changer.rst> for details.
 	
 	  If you want to compile this as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/kbuild/modules.rst> and
-	  <file:Documentation/scsi/scsi.txt>. The module will be called ch.o.
+	  <file:Documentation/scsi/scsi.rst>. The module will be called ch.o.
 	  If unsure, say N.
 
 config SCSI_ENCLOSURE
@@ -392,7 +383,7 @@ config SCSI_AHA152X
 
 	  It is explained in section 3.3 of the SCSI-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>. You might also want to
-	  read the file <file:Documentation/scsi/aha152x.txt>.
+	  read the file <file:Documentation/scsi/aha152x.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called aha152x.
@@ -430,7 +421,7 @@ config SCSI_AACRAID
 	help
 	  This driver supports a variety of Dell, HP, Adaptec, IBM and
 	  ICP storage products. For a list of supported products, refer
-	  to <file:Documentation/scsi/aacraid.txt>.
+	  to <file:Documentation/scsi/aacraid.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called aacraid.
@@ -457,7 +448,7 @@ config SCSI_DPT_I2O
 	help
 	  This driver supports all of Adaptec's I2O based RAID controllers as 
 	  well as the DPT SmartRaid V cards.  This is an Adaptec maintained
-	  driver by Deanna Bonds.  See <file:Documentation/scsi/dpti.txt>.
+	  driver by Deanna Bonds.  See <file:Documentation/scsi/dpti.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called dpt_i2o.
@@ -511,8 +502,8 @@ config SCSI_BUSLOGIC
 	  This is support for BusLogic MultiMaster and FlashPoint SCSI Host
 	  Adapters. Consult the SCSI-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>, and the files
-	  <file:Documentation/scsi/BusLogic.txt> and
-	  <file:Documentation/scsi/FlashPoint.txt> for more information.
+	  <file:Documentation/scsi/BusLogic.rst> and
+	  <file:Documentation/scsi/FlashPoint.rst> for more information.
 	  Note that support for FlashPoint is only available for 32-bit
 	  x86 configurations.
 
@@ -613,7 +604,7 @@ config FCOE_FNIC
 	  This is support for the Cisco PCI-Express FCoE HBA.
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>.
+	  <file:Documentation/scsi/scsi.rst>.
 	  The module will be called fnic.
 
 config SCSI_SNIC
@@ -623,7 +614,7 @@ config SCSI_SNIC
 	  This is support for the Cisco PCI-Express SCSI HBA.
 
 	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/scsi.txt>.
+	  <file:Documentation/scsi/scsi.rst>.
 	  The module will be called snic.
 
 config SCSI_SNIC_DEBUG_FS
@@ -813,7 +804,7 @@ config SCSI_PPA
 	  newer drives)", below.
 
 	  For more information about this driver and how to use it you should
-	  read the file <file:Documentation/scsi/ppa.txt>.  You should also read
+	  read the file <file:Documentation/scsi/ppa.rst>.  You should also read
 	  the SCSI-HOWTO, which is available from
 	  <http://www.tldp.org/docs.html#howto>.  If you use this driver,
 	  you will still be able to use the parallel port for other tasks,
@@ -840,7 +831,7 @@ config SCSI_IMM
 	  here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
 
 	  For more information about this driver and how to use it you should
-	  read the file <file:Documentation/scsi/ppa.txt>.  You should also read
+	  read the file <file:Documentation/scsi/ppa.rst>.  You should also read
 	  the SCSI-HOWTO, which is available from
 	  <http://www.tldp.org/docs.html#howto>.  If you use this driver,
 	  you will still be able to use the parallel port for other tasks,
@@ -930,7 +921,7 @@ config SCSI_SYM53C8XX_2
 	  language.  It does not support LSI53C10XX Ultra-320 PCI-X SCSI
 	  controllers; you need to use the Fusion MPT driver for that.
 
-	  Please read <file:Documentation/scsi/sym53c8xx_2.txt> for more
+	  Please read <file:Documentation/scsi/sym53c8xx_2.rst> for more
 	  information.
 
 config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
@@ -1127,7 +1118,7 @@ config SCSI_QLOGIC_FAS
 	  SCSI support"), below.
 
 	  Information about this driver is contained in
-	  <file:Documentation/scsi/qlogicfas.txt>.  You should also read the
+	  <file:Documentation/scsi/qlogicfas.rst>.  You should also read the
 	  SCSI-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
@@ -1197,7 +1188,7 @@ config SCSI_DC395x
 	  This driver works, but is still in experimental status. So better
 	  have a bootable disk and a backup in case of emergency.
 
-	  Documentation can be found in <file:Documentation/scsi/dc395x.txt>.
+	  Documentation can be found in <file:Documentation/scsi/dc395x.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called dc395x.