Merge tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "The VL_READ and VL_CLR ioctls have been reworked to be more useful.
  This will not break userspace as there are very few users and they are
  using the integer value as a boolean.

  Apart from that, two drivers were reworked and a few fixes here and
  there for a net reduction of number of lines.

  Summary:

  Subsystem:
   - the VL_READ and VL_CLR ioctls are now documented and their behavior
     is unified across all the drivers.
   - RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both
     REGMAP_I2C and REGMAP_SPI unecessarily.

  Drivers:
   - at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and
     sama5d2 compatibles.
   - cmos: solve lost interrupts issue on MS Surface 3
   - hym8563: return proper errno when time is invalid
   - rv3029: many fixes, nvram support"

* tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits)
  dt-bindings: rtc: at91rm9200: document clocks property
  rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
  rtc: Kconfig: select REGMAP_I2C when necessary
  rtc: Kconfig: properly indent sd3078 entry
  rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
  rtc: cmos: Use predefined value for RTC IRQ on legacy x86
  rtc: cmos: Stop using shared IRQ
  rtc: tps6586x: Use IRQ_NOAUTOEN flag
  rtc: at91rm9200: use FIELD_PREP/FIELD_GET
  rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
  rtc: at91rm9200: move register definitions to C file
  rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
  dt-bindings: rtc: at91rm9200: convert bindings to json-schema
  rtc: at91rm9200: remove procfs information
  dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc
  rtc: pcf8563: Use BIT
  rtc: moxart: Convert to SPDX identifier
  rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
  rtc: rx8025: Remove struct i2c_client from struct rx8025_data
  rtc: hym8563: Read the valid flag directly instead of caching it
  ...

1 files changed, 16 insertions, 8 deletions

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index df7a3843069d6..34c8b6c7e0954 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -240,6 +240,7 @@ config RTC_DRV_AS3722
 
 config RTC_DRV_DS1307
 	tristate "Dallas/Maxim DS1307/37/38/39/40/41, ST M41T00, EPSON RX-8025, ISL12057"
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for various compatible RTC
 	  chips (often with battery backup) connected with I2C. This driver
@@ -622,6 +623,7 @@ config RTC_DRV_RX8010
 
 config RTC_DRV_RX8581
 	tristate "Epson RX-8571/RX-8581"
+	select REGMAP_I2C
 	help
 	  If you say yes here you will get support for the Epson RX-8571/
 	  RX-8581.
@@ -649,6 +651,7 @@ config RTC_DRV_EM3027
 
 config RTC_DRV_RV3028
 	tristate "Micro Crystal RV3028"
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for the Micro Crystal
 	  RV3028.
@@ -677,13 +680,14 @@ config RTC_DRV_S5M
 	  will be called rtc-s5m.
 
 config RTC_DRV_SD3078
-    tristate "ZXW Shenzhen whwave SD3078"
-    help
-      If you say yes here you get support for the ZXW Shenzhen whwave
-      SD3078 RTC chips.
+	tristate "ZXW Shenzhen whwave SD3078"
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the ZXW Shenzhen whwave
+	  SD3078 RTC chips.
 
-      This driver can also be built as a module. If so, the module
-      will be called rtc-sd3078
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-sd3078
 
 endif # I2C
 
@@ -849,14 +853,14 @@ config RTC_I2C_AND_SPI
 	default m if I2C=m
 	default y if I2C=y
 	default y if SPI_MASTER=y
-	select REGMAP_I2C if I2C
-	select REGMAP_SPI if SPI_MASTER
 
 comment "SPI and I2C RTC drivers"
 
 config RTC_DRV_DS3232
 	tristate "Dallas/Maxim DS3232/DS3234"
 	depends on RTC_I2C_AND_SPI
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
 	help
 	  If you say yes here you get support for Dallas Semiconductor
 	  DS3232 and DS3234 real-time clock chips. If an interrupt is associated
@@ -876,6 +880,8 @@ config RTC_DRV_DS3232_HWMON
 config RTC_DRV_PCF2127
 	tristate "NXP PCF2127"
 	depends on RTC_I2C_AND_SPI
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
 	select WATCHDOG_CORE if WATCHDOG
 	help
 	  If you say yes here you get support for the NXP PCF2127/29 RTC
@@ -892,6 +898,8 @@ config RTC_DRV_PCF2127
 config RTC_DRV_RV3029C2
 	tristate "Micro Crystal RV3029/3049"
 	depends on RTC_I2C_AND_SPI
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
 	help
 	  If you say yes here you get support for the Micro Crystal
 	  RV3029 and RV3049 RTC chips.