Merge tag 'rtc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "A huge series from me this cycle. I went through many drivers to set
  the date and time range supported by the RTC which helps solving HW
  limitation when the time comes (as early as next year for some). This
  time, I focused on drivers using .set_mms and .set_mmss64, allowing me
  to remove those callbacks. About a third of the patches got reviews, I
  actually own the RTCs and I tested another third and the remaining one
  are unlikely to cause any issues.

  Other than that, a single new driver and the usual fixes here and there.

  Summary:

  Subsystem:

   - set_mmss and set_mmss64 rtc_ops removal

   - Fix timestamp value for RTC_TIMESTAMP_BEGIN_1900

   - Use SPDX identifier for the core

   - validate upper bound of tm->tm_year

  New driver:

   - Aspeed BMC SoC RTC

  Drivers:

   - abx80x: use rtc_add_group

   - ds3232: nvram support

   - pcf85063: add alarm, nvram, offset correction and microcrystal
     rv8263 support

   - x1205: add of_match_table

   - Use set_time instead of set_mms/set_mmss64 for: ab3100, coh901331,
     digicolor, ds1672, ds2404, ep93xx, imxdi, jz4740, lpc32xx, mc13xxx,
     mxc, pcap, stmp3xxx, test, wm831x, xgene.

   - Set RTC range for: ab3100, at91sam9, coh901331, da9063, digicolor,
     dm355evm, ds1672, ds2404, ep39xx, goldfish, imxdi, jz4740, lpc32xx,
     mc13xxx, mv, mxc, omap, pcap, pcf85063, pcf85363, ps3, sh,
     stmp3xxx, sun4v, tegra, wm831x, xgene.

   - Switch to rtc_time64_to_tm/rtc_tm_to_time64 for the driver that
     properly set the RTC range.

   - Use dev_get_drvdata instead of multiple indirections"

* tag 'rtc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (177 commits)
  rtc: snvs: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
  rtc: imxdi: remove unused variable
  rtc: drop set_mms and set_mmss64
  rtc: pcap: convert to SPDX identifier
  rtc: pcap: use .set_time
  rtc: pcap: switch to rtc_time64_to_tm/rtc_tm_to_time64
  rtc: pcap: set range
  rtc: digicolor: convert to SPDX identifier
  rtc: digicolor: use .set_time
  rtc: digicolor: set range
  rtc: digicolor: fix possible race condition
  rtc: jz4740: convert to SPDX identifier
  rtc: jz4740: rework invalid time detection
  rtc: jz4740: use dev_pm_set_wake_irq() to simplify code
  rtc: jz4740: use .set_time
  rtc: jz4740: remove useless check
  rtc: jz4740: switch to rtc_time64_to_tm/rtc_tm_to_time64
  rtc: jz4740: set range
  rtc: 88pm860x: prevent use-after-free on device remove
  rtc: Use dev_get_drvdata()
  ...

1 files changed, 15 insertions, 4 deletions

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index f933c06bff4f8..7b8e156dbf383 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -439,6 +439,7 @@ config RTC_DRV_PCF8523
 
 config RTC_DRV_PCF85063
 	tristate "NXP PCF85063"
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for the PCF85063 RTC chip
 
@@ -447,7 +448,6 @@ config RTC_DRV_PCF85063
 
 config RTC_DRV_PCF85363
 	tristate "NXP PCF85363"
-	depends on I2C
 	select REGMAP_I2C
 	help
 	  If you say yes here you get support for the PCF85363 RTC chip.
@@ -602,7 +602,6 @@ config RTC_DRV_FM3130
 
 config RTC_DRV_RX8010
 	tristate "Epson RX8010SJ"
-	depends on I2C
 	help
 	  If you say yes here you get support for the Epson RX8010SJ RTC
 	  chip.
@@ -1432,7 +1431,7 @@ config RTC_DRV_AT91RM9200
 config RTC_DRV_AT91SAM9
 	tristate "AT91SAM9 RTT as RTC"
 	depends on ARCH_AT91 || COMPILE_TEST
-	depends on HAS_IOMEM
+	depends on OF && HAS_IOMEM
 	select MFD_SYSCON
 	help
 	  Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which
@@ -1841,6 +1840,17 @@ config RTC_DRV_RTD119X
 	  If you say yes here, you get support for the RTD1295 SoC
 	  Real Time Clock.
 
+config RTC_DRV_ASPEED
+	tristate "ASPEED RTC"
+	depends on OF
+	depends on ARCH_ASPEED || COMPILE_TEST
+	help
+	  If you say yes here you get support for the ASPEED BMC SoC real time
+	  clocks.
+
+	  This driver can also be built as a module, if so, the module
+	  will be called "rtc-aspeed".
+
 comment "HID Sensor RTC drivers"
 
 config RTC_DRV_HID_SENSOR_TIME
@@ -1857,7 +1867,8 @@ config RTC_DRV_HID_SENSOR_TIME
 
 config RTC_DRV_GOLDFISH
 	tristate "Goldfish Real Time Clock"
-	depends on MIPS && (GOLDFISH || COMPILE_TEST)
+	depends on OF && HAS_IOMEM
+	depends on GOLDFISH || COMPILE_TEST
 	help
 	  Say yes to enable RTC driver for the Goldfish based virtual platform.