V4L/DVB (4228a): pvrusb2 to kernel 2.6.18

Implement V4L2 driver for the Hauppauge PVR USB2 TV tuner.

The Hauppauge PVR USB2 is a USB connected TV tuner with an embedded
cx23416 hardware MPEG2 encoder.  There are two major variants of this
device; this driver handles both.  Any V4L2 application which
understands MPEG2 video stream data should be able to work with this
device.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 62 insertions, 0 deletions

diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig
new file mode 100644
index 0000000000000..7e727fe14b322
--- /dev/null
+++ b/drivers/media/video/pvrusb2/Kconfig
@@ -0,0 +1,62 @@
+config VIDEO_PVRUSB2
+	tristate "Hauppauge WinTV-PVR USB2 support"
+	depends on VIDEO_V4L2 && USB && I2C && EXPERIMENTAL
+	select FW_LOADER
+	select VIDEO_TUNER
+	select VIDEO_TVEEPROM
+	select VIDEO_CX2341X
+	select VIDEO_SAA711X
+	select VIDEO_MSP3400
+	---help---
+	  This is a video4linux driver for Conexant 23416 based
+	  usb2 personal video recorder devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pvrusb2
+
+config VIDEO_PVRUSB2_24XXX
+	bool "Hauppauge WinTV-PVR USB2 support for 24xxx model series"
+	depends on VIDEO_PVRUSB2 && EXPERIMENTAL
+	select VIDEO_CX25840
+	select VIDEO_WM8775
+	---help---
+	  This option enables inclusion of additional logic to operate
+	  newer WinTV-PVR USB2 devices whose model number is of the
+	  form "24xxx" (leading prefix of "24" followed by 3 digits).
+	  To see if you may need this option, examine the white
+	  sticker on the underside of your device.  Enabling this
+	  option will not harm support for older devices, however it
+	  is a separate option because of the experimental nature of
+	  this new feature.
+
+	  If you are in doubt, say N.
+
+	  Note: This feature is _very_ experimental.  You have been
+	  warned.
+
+config VIDEO_PVRUSB2_SYSFS
+	bool "pvrusb2 sysfs support (EXPERIMENTAL)"
+	default y
+	depends on VIDEO_PVRUSB2 && SYSFS && EXPERIMENTAL
+	---help---
+	  This option enables the operation of a sysfs based
+	  interface for query and control of the pvrusb2 driver.
+
+	  This is not generally needed for v4l applications,
+	  although certain applications are optimized to take
+	  advantage of this feature.
+
+	  If you are in doubt, say Y.
+
+	  Note: This feature is experimental and subject to change.
+
+config VIDEO_PVRUSB2_DEBUGIFC
+	bool "pvrusb2 debug interface"
+	depends on VIDEO_PVRUSB2_SYSFS
+	---help---
+	  This option enables the inclusion of a debug interface
+	  in the pvrusb2 driver, hosted through sysfs.
+
+	  You do not need to select this option unless you plan
+	  on debugging the driver or performing a manual firmware
+	  extraction.