IB/ipath: Don't count IB symbol and link errors unless link is UP

Implement the ignoring of ibsymbol errors and linkrecover errors while
the link is at less than INIT (long needed), to get accurate counts.
Particularly an issue when doing non-IBTA DDR negotiation with chips
from vendors that do not support IBTA mode negotiation.  If the driver
is unloaded, and there is a delta, the adjusted counters are written
back to the chip, so they stay adjusted across driver reload.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

1 files changed, 61 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index 421cc2af891f0..fbf8c5379ea84 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -721,6 +721,12 @@ static int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
 				 INFINIPATH_HWE_SERDESPLLFAILED);
 	}
 
+	dd->ibdeltainprog = 1;
+	dd->ibsymsnap =
+	     ipath_read_creg32(dd, dd->ipath_cregs->cr_ibsymbolerrcnt);
+	dd->iblnkerrsnap =
+	     ipath_read_creg32(dd, dd->ipath_cregs->cr_iblinkerrrecovcnt);
+
 	val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
 	config1 = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig1);
 
@@ -810,6 +816,36 @@ static void ipath_pe_quiet_serdes(struct ipath_devdata *dd)
 {
 	u64 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
 
+	if (dd->ibsymdelta || dd->iblnkerrdelta ||
+	    dd->ibdeltainprog) {
+		u64 diagc;
+		/* enable counter writes */
+		diagc = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwdiagctrl);
+		ipath_write_kreg(dd, dd->ipath_kregs->kr_hwdiagctrl,
+				 diagc | INFINIPATH_DC_COUNTERWREN);
+
+		if (dd->ibsymdelta || dd->ibdeltainprog) {
+			val = ipath_read_creg32(dd,
+					dd->ipath_cregs->cr_ibsymbolerrcnt);
+			if (dd->ibdeltainprog)
+				val -= val - dd->ibsymsnap;
+			val -= dd->ibsymdelta;
+			ipath_write_creg(dd,
+				  dd->ipath_cregs->cr_ibsymbolerrcnt, val);
+		}
+		if (dd->iblnkerrdelta || dd->ibdeltainprog) {
+			val = ipath_read_creg32(dd,
+					dd->ipath_cregs->cr_iblinkerrrecovcnt);
+			if (dd->ibdeltainprog)
+				val -= val - dd->iblnkerrsnap;
+			val -= dd->iblnkerrdelta;
+			ipath_write_creg(dd,
+				   dd->ipath_cregs->cr_iblinkerrrecovcnt, val);
+	     }
+
+	     /* and disable counter writes */
+	     ipath_write_kreg(dd, dd->ipath_kregs->kr_hwdiagctrl, diagc);
+	}
 	val |= INFINIPATH_SERDC0_TXIDLE;
 	ipath_dbg("Setting TxIdleEn on serdes (config0 = %llx)\n",
 		  (unsigned long long) val);
@@ -1749,6 +1785,31 @@ static void ipath_pe_config_jint(struct ipath_devdata *dd, u16 a, u16 b)
 
 static int ipath_pe_ib_updown(struct ipath_devdata *dd, int ibup, u64 ibcs)
 {
+	if (ibup) {
+		if (dd->ibdeltainprog) {
+			dd->ibdeltainprog = 0;
+			dd->ibsymdelta +=
+				ipath_read_creg32(dd,
+				  dd->ipath_cregs->cr_ibsymbolerrcnt) -
+				dd->ibsymsnap;
+			dd->iblnkerrdelta +=
+				ipath_read_creg32(dd,
+				  dd->ipath_cregs->cr_iblinkerrrecovcnt) -
+				dd->iblnkerrsnap;
+		}
+	} else {
+		dd->ipath_lli_counter = 0;
+		if (!dd->ibdeltainprog) {
+			dd->ibdeltainprog = 1;
+			dd->ibsymsnap =
+				ipath_read_creg32(dd,
+				  dd->ipath_cregs->cr_ibsymbolerrcnt);
+			dd->iblnkerrsnap =
+				ipath_read_creg32(dd,
+				  dd->ipath_cregs->cr_iblinkerrrecovcnt);
+		}
+	}
+
 	ipath_setup_pe_setextled(dd, ipath_ib_linkstate(dd, ibcs),
 		ipath_ib_linktrstate(dd, ibcs));
 	return 0;