Auto merge with /home/aegl/GIT/linus

21 files changed, 787 insertions, 178 deletions

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index e14278d5988236..39a6c1b0b9a32d 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -24,48 +24,91 @@
 #include "entry-header.S"
 
 /*
+ * Interrupt handling.  Preserves r7, r8, r9
+ */
+	.macro	irq_handler
+1:	get_irqnr_and_base r0, r6, r5, lr
+	movne	r1, sp
+	@
+	@ routine called with r0 = irq number, r1 = struct pt_regs *
+	@
+	adrne	lr, 1b
+	bne	asm_do_IRQ
+
+#ifdef CONFIG_SMP
+	/*
+	 * XXX
+	 *
+	 * this macro assumes that irqstat (r6) and base (r5) are
+	 * preserved from get_irqnr_and_base above
+	 */
+	test_for_ipi r0, r6, r5, lr
+	movne	r0, sp
+	adrne	lr, 1b
+	bne	do_IPI
+#endif
+
+	.endm
+
+/*
  * Invalid mode handlers
  */
-	.macro	inv_entry, sym, reason
-	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
-	stmia	sp, {r0 - lr}			@ Save XXX r0 - lr
-	ldr	r4, .LC\sym
+	.macro	inv_entry, reason
+	sub	sp, sp, #S_FRAME_SIZE
+	stmib	sp, {r1 - lr}
 	mov	r1, #\reason
 	.endm
 
 __pabt_invalid:
-	inv_entry abt, BAD_PREFETCH
-	b	1f
+	inv_entry BAD_PREFETCH
+	b	common_invalid
 
 __dabt_invalid:
-	inv_entry abt, BAD_DATA
-	b	1f
+	inv_entry BAD_DATA
+	b	common_invalid
 
 __irq_invalid:
-	inv_entry irq, BAD_IRQ
-	b	1f
+	inv_entry BAD_IRQ
+	b	common_invalid
 
 __und_invalid:
-	inv_entry und, BAD_UNDEFINSTR
+	inv_entry BAD_UNDEFINSTR
+
+	@
+	@ XXX fall through to common_invalid
+	@
+
+@
+@ common_invalid - generic code for failed exception (re-entrant version of handlers)
+@
+common_invalid:
+	zero_fp
+
+	ldmia	r0, {r4 - r6}
+	add	r0, sp, #S_PC		@ here for interlock avoidance
+	mov	r7, #-1			@  ""   ""    ""        ""
+	str	r4, [sp]		@ save preserved r0
+	stmia	r0, {r5 - r7}		@ lr_<exception>,
+					@ cpsr_<exception>, "old_r0"
 
-1:	zero_fp
-	ldmia	r4, {r5 - r7}			@ Get XXX pc, cpsr, old_r0
-	add	r4, sp, #S_PC
-	stmia	r4, {r5 - r7}			@ Save XXX pc, cpsr, old_r0
 	mov	r0, sp
-	and	r2, r6, #31			@ int mode
+	and	r2, r6, #0x1f
 	b	bad_mode
 
 /*
  * SVC mode handlers
  */
-	.macro	svc_entry, sym
+	.macro	svc_entry
 	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ save r0 - r12
-	ldr	r2, .LC\sym
-	add	r0, sp, #S_FRAME_SIZE
-	ldmia	r2, {r2 - r4}			@ get pc, cpsr
-	add	r5, sp, #S_SP
+	stmib	sp, {r1 - r12}
+
+	ldmia	r0, {r1 - r3}
+	add	r5, sp, #S_SP		@ here for interlock avoidance
+	mov	r4, #-1			@  ""  ""      ""       ""
+	add	r0, sp, #S_FRAME_SIZE   @  ""  ""      ""       ""
+	str	r1, [sp]		@ save the "real" r0 copied
+					@ from the exception stack
+
 	mov	r1, lr
 
 	@
@@ -82,7 +125,7 @@ __und_invalid:
 
 	.align	5
 __dabt_svc:
-	svc_entry abt
+	svc_entry
 
 	@
 	@ get ready to re-enable interrupts if appropriate
@@ -129,28 +172,24 @@ __dabt_svc:
 
 	.align	5
 __irq_svc:
-	svc_entry irq
+	svc_entry
+
 #ifdef CONFIG_PREEMPT
-	get_thread_info r8
-	ldr	r9, [r8, #TI_PREEMPT]		@ get preempt count
-	add	r7, r9, #1			@ increment it
-	str	r7, [r8, #TI_PREEMPT]
+	get_thread_info tsk
+	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
+	add	r7, r8, #1			@ increment it
+	str	r7, [tsk, #TI_PREEMPT]
 #endif
-1:	get_irqnr_and_base r0, r6, r5, lr
-	movne	r1, sp
-	@
-	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	@
-	adrne	lr, 1b
-	bne	asm_do_IRQ
+
+	irq_handler
 #ifdef CONFIG_PREEMPT
-	ldr	r0, [r8, #TI_FLAGS]		@ get flags
+	ldr	r0, [tsk, #TI_FLAGS]		@ get flags
 	tst	r0, #_TIF_NEED_RESCHED
 	blne	svc_preempt
 preempt_return:
-	ldr	r0, [r8, #TI_PREEMPT]		@ read preempt value
+	ldr	r0, [tsk, #TI_PREEMPT]		@ read preempt value
+	str	r8, [tsk, #TI_PREEMPT]		@ restore preempt count
 	teq	r0, r7
-	str	r9, [r8, #TI_PREEMPT]		@ restore preempt count
 	strne	r0, [r0, -r0]			@ bug()
 #endif
 	ldr	r0, [sp, #S_PSR]		@ irqs are already disabled
@@ -161,7 +200,7 @@ preempt_return:
 
 #ifdef CONFIG_PREEMPT
 svc_preempt:
-	teq	r9, #0				@ was preempt count = 0
+	teq	r8, #0				@ was preempt count = 0
 	ldreq	r6, .LCirq_stat
 	movne	pc, lr				@ no
 	ldr	r0, [r6, #4]			@ local_irq_count
@@ -169,9 +208,9 @@ svc_preempt:
 	adds	r0, r0, r1
 	movne	pc, lr
 	mov	r7, #0				@ preempt_schedule_irq
-	str	r7, [r8, #TI_PREEMPT]		@ expects preempt_count == 0
+	str	r7, [tsk, #TI_PREEMPT]		@ expects preempt_count == 0
 1:	bl	preempt_schedule_irq		@ irq en/disable is done inside
-	ldr	r0, [r8, #TI_FLAGS]		@ get new tasks TI_FLAGS
+	ldr	r0, [tsk, #TI_FLAGS]		@ get new tasks TI_FLAGS
 	tst	r0, #_TIF_NEED_RESCHED
 	beq	preempt_return			@ go again
 	b	1b
@@ -179,7 +218,7 @@ svc_preempt:
 
 	.align	5
 __und_svc:
-	svc_entry und
+	svc_entry
 
 	@
 	@ call emulation code, which returns using r9 if it has emulated
@@ -209,7 +248,7 @@ __und_svc:
 
 	.align	5
 __pabt_svc:
-	svc_entry abt
+	svc_entry
 
 	@
 	@ re-enable interrupts if appropriate
@@ -242,12 +281,8 @@ __pabt_svc:
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 
 	.align	5
-.LCirq:
-	.word	__temp_irq
-.LCund:
-	.word	__temp_und
-.LCabt:
-	.word	__temp_abt
+.LCcralign:
+	.word	cr_alignment
 #ifdef MULTI_ABORT
 .LCprocfns:
 	.word	processor
@@ -262,12 +297,16 @@ __pabt_svc:
 /*
  * User mode handlers
  */
-	.macro	usr_entry, sym
-	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
-	stmia	sp, {r0 - r12}			@ save r0 - r12
-	ldr	r7, .LC\sym
-	add	r5, sp, #S_PC
-	ldmia	r7, {r2 - r4}			@ Get USR pc, cpsr
+	.macro	usr_entry
+	sub	sp, sp, #S_FRAME_SIZE
+	stmib	sp, {r1 - r12}
+
+	ldmia	r0, {r1 - r3}
+	add	r0, sp, #S_PC		@ here for interlock avoidance
+	mov	r4, #-1			@  ""  ""     ""        ""
+
+	str	r1, [sp]		@ save the "real" r0 copied
+					@ from the exception stack
 
 #if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
 	@ make sure our user space atomic helper is aborted
@@ -284,13 +323,13 @@ __pabt_svc:
 	@
 	@ Also, separately save sp_usr and lr_usr
 	@
-	stmia	r5, {r2 - r4}
-	stmdb	r5, {sp, lr}^
+	stmia	r0, {r2 - r4}
+	stmdb	r0, {sp, lr}^
 
 	@
 	@ Enable the alignment trap while in kernel mode
 	@
-	alignment_trap r7, r0, __temp_\sym
+	alignment_trap r0
 
 	@
 	@ Clear FP to mark the first stack frame
@@ -300,7 +339,7 @@ __pabt_svc:
 
 	.align	5
 __dabt_usr:
-	usr_entry abt
+	usr_entry
 
 	@
 	@ Call the processor-specific abort handler:
@@ -329,30 +368,23 @@ __dabt_usr:
 
 	.align	5
 __irq_usr:
-	usr_entry irq
+	usr_entry
 
+	get_thread_info tsk
 #ifdef CONFIG_PREEMPT
-	get_thread_info r8
-	ldr	r9, [r8, #TI_PREEMPT]		@ get preempt count
-	add	r7, r9, #1			@ increment it
-	str	r7, [r8, #TI_PREEMPT]
+	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
+	add	r7, r8, #1			@ increment it
+	str	r7, [tsk, #TI_PREEMPT]
 #endif
-1:	get_irqnr_and_base r0, r6, r5, lr
-	movne	r1, sp
-	adrne	lr, 1b
-	@
-	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	@
-	bne	asm_do_IRQ
+
+	irq_handler
 #ifdef CONFIG_PREEMPT
-	ldr	r0, [r8, #TI_PREEMPT]
+	ldr	r0, [tsk, #TI_PREEMPT]
+	str	r8, [tsk, #TI_PREEMPT]
 	teq	r0, r7
-	str	r9, [r8, #TI_PREEMPT]
 	strne	r0, [r0, -r0]
-	mov	tsk, r8
-#else
-	get_thread_info tsk
 #endif
+
 	mov	why, #0
 	b	ret_to_user
 
@@ -360,7 +392,7 @@ __irq_usr:
 
 	.align	5
 __und_usr:
-	usr_entry und
+	usr_entry
 
 	tst	r3, #PSR_T_BIT			@ Thumb mode?
 	bne	fpundefinstr			@ ignore FP
@@ -476,7 +508,7 @@ fpundefinstr:
 
 	.align	5
 __pabt_usr:
-	usr_entry abt
+	usr_entry
 
 	enable_irq				@ Enable interrupts
 	mov	r0, r2				@ address (pc)
@@ -741,29 +773,41 @@ __kuser_helper_end:
  *
  * Common stub entry macro:
  *   Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
+ *
+ * SP points to a minimal amount of processor-private memory, the address
+ * of which is copied into r0 for the mode specific abort handler.
  */
-	.macro	vector_stub, name, sym, correction=0
+	.macro	vector_stub, name, correction=0
 	.align	5
 
 vector_\name:
-	ldr	r13, .LCs\sym
 	.if \correction
 	sub	lr, lr, #\correction
 	.endif
-	str	lr, [r13]			@ save lr_IRQ
+
+	@
+	@ Save r0, lr_<exception> (parent PC) and spsr_<exception>
+	@ (parent CPSR)
+	@
+	stmia	sp, {r0, lr}		@ save r0, lr
 	mrs	lr, spsr
-	str	lr, [r13, #4]			@ save spsr_IRQ
+	str	lr, [sp, #8]		@ save spsr
+
 	@
-	@ now branch to the relevant MODE handling routine
+	@ Prepare for SVC32 mode.  IRQs remain disabled.
 	@
-	mrs	r13, cpsr
-	bic	r13, r13, #MODE_MASK
-	orr	r13, r13, #SVC_MODE
-	msr	spsr_cxsf, r13			@ switch to SVC_32 mode
+	mrs	r0, cpsr
+	bic	r0, r0, #MODE_MASK
+	orr	r0, r0, #SVC_MODE
+	msr	spsr_cxsf, r0
 
-	and	lr, lr, #15
+	@
+	@ the branch table must immediately follow this code
+	@
+	mov	r0, sp
+	and	lr, lr, #0x0f
 	ldr	lr, [pc, lr, lsl #2]
-	movs	pc, lr				@ Changes mode and branches
+	movs	pc, lr			@ branch to handler in SVC mode
 	.endm
 
 	.globl	__stubs_start
@@ -771,7 +815,7 @@ __stubs_start:
 /*
  * Interrupt dispatcher
  */
-	vector_stub	irq, irq, 4
+	vector_stub	irq, 4
 
 	.long	__irq_usr			@  0  (USR_26 / USR_32)
 	.long	__irq_invalid			@  1  (FIQ_26 / FIQ_32)
@@ -794,7 +838,7 @@ __stubs_start:
  * Data abort dispatcher
  * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
  */
-	vector_stub	dabt, abt, 8
+	vector_stub	dabt, 8
 
 	.long	__dabt_usr			@  0  (USR_26 / USR_32)
 	.long	__dabt_invalid			@  1  (FIQ_26 / FIQ_32)
@@ -817,7 +861,7 @@ __stubs_start:
  * Prefetch abort dispatcher
  * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
  */
-	vector_stub	pabt, abt, 4
+	vector_stub	pabt, 4
 
 	.long	__pabt_usr			@  0 (USR_26 / USR_32)
 	.long	__pabt_invalid			@  1 (FIQ_26 / FIQ_32)
@@ -840,7 +884,7 @@ __stubs_start:
  * Undef instr entry dispatcher
  * Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
  */
-	vector_stub	und, und
+	vector_stub	und
 
 	.long	__und_usr			@  0 (USR_26 / USR_32)
 	.long	__und_invalid			@  1 (FIQ_26 / FIQ_32)
@@ -894,13 +938,6 @@ vector_addrexcptn:
 .LCvswi:
 	.word	vector_swi
 
-.LCsirq:
-	.word	__temp_irq
-.LCsund:
-	.word	__temp_und
-.LCsabt:
-	.word	__temp_abt
-
 	.globl	__stubs_end
 __stubs_end:
 
@@ -922,23 +959,6 @@ __vectors_end:
 
 	.data
 
-/*
- * Do not reorder these, and do not insert extra data between...
- */
-
-__temp_irq:
-	.word	0				@ saved lr_irq
-	.word	0				@ saved spsr_irq
-	.word	-1				@ old_r0
-__temp_und:
-	.word	0				@ Saved lr_und
-	.word	0				@ Saved spsr_und
-	.word	-1				@ old_r0
-__temp_abt:
-	.word	0				@ Saved lr_abt
-	.word	0				@ Saved spsr_abt
-	.word	-1				@ old_r0
-
 	.globl	cr_alignment
 	.globl	cr_no_alignment
 cr_alignment:
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index a3d40a0e2b0479..afef21273963a6 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -59,11 +59,10 @@
 	mov	\rd, \rd, lsl #13
 	.endm
 
-	.macro	alignment_trap, rbase, rtemp, sym
+	.macro	alignment_trap, rtemp
 #ifdef CONFIG_ALIGNMENT_TRAP
-#define OFF_CR_ALIGNMENT(x)	cr_alignment - x
-
-	ldr	\rtemp, [\rbase, #OFF_CR_ALIGNMENT(\sym)]
+	ldr	\rtemp, .LCcralign
+	ldr	\rtemp, [\rtemp]
 	mcr	p15, 0, \rtemp, c1, c0
 #endif
 	.endm
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 4733877296d412..bd4823c74645f0 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -2,6 +2,8 @@
  *  linux/arch/arm/kernel/head.S
  *
  *  Copyright (C) 1994-2002 Russell King
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -165,6 +167,48 @@ __mmap_switched:
 	stmia	r6, {r0, r4}			@ Save control register values
 	b	start_kernel
 
+#if defined(CONFIG_SMP)
+	.type   secondary_startup, #function
+ENTRY(secondary_startup)
+	/*
+	 * Common entry point for secondary CPUs.
+	 *
+	 * Ensure that we're in SVC mode, and IRQs are disabled.  Lookup
+	 * the processor type - there is no need to check the machine type
+	 * as it has already been validated by the primary processor.
+	 */
+	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC
+	bl	__lookup_processor_type
+	movs	r10, r5				@ invalid processor?
+	moveq	r0, #'p'			@ yes, error 'p'
+	beq	__error
+
+	/*
+	 * Use the page tables supplied from  __cpu_up.
+	 */
+	adr	r4, __secondary_data
+	ldmia	r4, {r5, r6, r13}		@ address to jump to after
+	sub	r4, r4, r5			@ mmu has been enabled
+	ldr	r4, [r6, r4]			@ get secondary_data.pgdir
+	adr	lr, __enable_mmu		@ return address
+	add	pc, r10, #12			@ initialise processor
+						@ (return control reg)
+
+	/*
+	 * r6  = &secondary_data
+	 */
+ENTRY(__secondary_switched)
+	ldr	sp, [r6, #4]			@ get secondary_data.stack
+	mov	fp, #0
+	b	secondary_start_kernel
+
+	.type	__secondary_data, %object
+__secondary_data:
+	.long	.
+	.long	secondary_data
+	.long	__secondary_switched
+#endif /* defined(CONFIG_SMP) */
+
 
 
 /*
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index c2a7da3ac0f1ff..9fed5fa194d902 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -92,6 +92,14 @@ struct cpu_user_fns cpu_user;
 struct cpu_cache_fns cpu_cache;
 #endif
 
+struct stack {
+	u32 irq[3];
+	u32 abt[3];
+	u32 und[3];
+} ____cacheline_aligned;
+
+static struct stack stacks[NR_CPUS];
+
 char elf_platform[ELF_PLATFORM_SIZE];
 EXPORT_SYMBOL(elf_platform);
 
@@ -307,8 +315,6 @@ static void __init setup_processor(void)
 	       cpu_name, processor_id, (int)processor_id & 15,
 	       proc_arch[cpu_architecture()]);
 
-	dump_cpu_info(smp_processor_id());
-
 	sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS);
 	sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
 	elf_hwcap = list->elf_hwcap;
@@ -316,6 +322,46 @@ static void __init setup_processor(void)
 	cpu_proc_init();
 }
 
+/*
+ * cpu_init - initialise one CPU.
+ *
+ * cpu_init dumps the cache information, initialises SMP specific
+ * information, and sets up the per-CPU stacks.
+ */
+void cpu_init(void)
+{
+	unsigned int cpu = smp_processor_id();
+	struct stack *stk = &stacks[cpu];
+
+	if (cpu >= NR_CPUS) {
+		printk(KERN_CRIT "CPU%u: bad primary CPU number\n", cpu);
+		BUG();
+	}
+
+	dump_cpu_info(cpu);
+
+	/*
+	 * setup stacks for re-entrant exception handlers
+	 */
+	__asm__ (
+	"msr	cpsr_c, %1\n\t"
+	"add	sp, %0, %2\n\t"
+	"msr	cpsr_c, %3\n\t"
+	"add	sp, %0, %4\n\t"
+	"msr	cpsr_c, %5\n\t"
+	"add	sp, %0, %6\n\t"
+	"msr	cpsr_c, %7"
+	    :
+	    : "r" (stk),
+	      "I" (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+	      "I" (offsetof(struct stack, irq[0])),
+	      "I" (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+	      "I" (offsetof(struct stack, abt[0])),
+	      "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+	      "I" (offsetof(struct stack, und[0])),
+	      "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE));
+}
+
 static struct machine_desc * __init setup_machine(unsigned int nr)
 {
 	struct machine_desc *list;
@@ -715,6 +761,8 @@ void __init setup_arch(char **cmdline_p)
 	paging_init(&meminfo, mdesc);
 	request_standard_resources(&meminfo, mdesc);
 
+	cpu_init();
+
 	/*
 	 * Set up various architecture-specific pointers
 	 */
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index ecc8c3332408a1..45ed036336e053 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -24,6 +24,9 @@
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/cpu.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
 #include <asm/processor.h>
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
@@ -37,6 +40,13 @@ cpumask_t cpu_present_mask;
 cpumask_t cpu_online_map;
 
 /*
+ * as from 2.5, kernels no longer have an init_tasks structure
+ * so we need some other way of telling a new secondary core
+ * where to place its SVC stack
+ */
+struct secondary_data secondary_data;
+
+/*
  * structures for inter-processor calls
  * - A collection of single bit ipi messages.
  */
@@ -71,6 +81,8 @@ static DEFINE_SPINLOCK(smp_call_function_lock);
 int __init __cpu_up(unsigned int cpu)
 {
 	struct task_struct *idle;
+	pgd_t *pgd;
+	pmd_t *pmd;
 	int ret;
 
 	/*
@@ -84,9 +96,54 @@ int __init __cpu_up(unsigned int cpu)
 	}
 
 	/*
+	 * Allocate initial page tables to allow the new CPU to
+	 * enable the MMU safely.  This essentially means a set
+	 * of our "standard" page tables, with the addition of
+	 * a 1:1 mapping for the physical address of the kernel.
+	 */
+	pgd = pgd_alloc(&init_mm);
+	pmd = pmd_offset(pgd, PHYS_OFFSET);
+	*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
+		     PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
+
+	/*
+	 * We need to tell the secondary core where to find
+	 * its stack and the page tables.
+	 */
+	secondary_data.stack = (void *)idle->thread_info + THREAD_SIZE - 8;
+	secondary_data.pgdir = virt_to_phys(pgd);
+	wmb();
+
+	/*
 	 * Now bring the CPU into our world.
 	 */
 	ret = boot_secondary(cpu, idle);
+	if (ret == 0) {
+		unsigned long timeout;
+
+		/*
+		 * CPU was successfully started, wait for it
+		 * to come online or time out.
+		 */
+		timeout = jiffies + HZ;
+		while (time_before(jiffies, timeout)) {
+			if (cpu_online(cpu))
+				break;
+
+			udelay(10);
+			barrier();
+		}
+
+		if (!cpu_online(cpu))
+			ret = -EIO;
+	}
+
+	secondary_data.stack = 0;
+	secondary_data.pgdir = 0;
+
+	*pmd_offset(pgd, PHYS_OFFSET) = __pmd(0);
+	pgd_free(pgd);
+
 	if (ret) {
 		printk(KERN_CRIT "cpu_up: processor %d failed to boot\n", cpu);
 		/*
@@ -98,6 +155,56 @@ int __init __cpu_up(unsigned int cpu)
 }
 
 /*
+ * This is the secondary CPU boot entry.  We're using this CPUs
+ * idle thread stack, but a set of temporary page tables.
+ */
+asmlinkage void __init secondary_start_kernel(void)
+{
+	struct mm_struct *mm = &init_mm;
+	unsigned int cpu = smp_processor_id();
+
+	printk("CPU%u: Booted secondary processor\n", cpu);
+
+	/*
+	 * All kernel threads share the same mm context; grab a
+	 * reference and switch to it.
+	 */
+	atomic_inc(&mm->mm_users);
+	atomic_inc(&mm->mm_count);
+	current->active_mm = mm;
+	cpu_set(cpu, mm->cpu_vm_mask);
+	cpu_switch_mm(mm->pgd, mm);
+	enter_lazy_tlb(mm, current);
+
+	cpu_init();
+
+	/*
+	 * Give the platform a chance to do its own initialisation.
+	 */
+	platform_secondary_init(cpu);
+
+	/*
+	 * Enable local interrupts.
+	 */
+	local_irq_enable();
+	local_fiq_enable();
+
+	calibrate_delay();
+
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * OK, now it's safe to let the boot CPU continue
+	 */
+	cpu_set(cpu, cpu_online_map);
+
+	/*
+	 * OK, it's off to the idle thread for us
+	 */
+	cpu_idle();
+}
+
+/*
  * Called by both boot and secondaries to move global data into
  * per-processor storage.
  */
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index 158daaf9e3b03e..ebb255bdce8aa7 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_LEDS)			+= leds.o
 obj-$(CONFIG_PCI)			+= pci_v3.o pci.o
 obj-$(CONFIG_CPU_FREQ_INTEGRATOR)	+= cpu.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)		+= impd1.o
+obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index bd17b5154311f4..d302f0405fd2fa 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -14,6 +14,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/smp.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -221,7 +222,24 @@ integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	 */
 	timer1->TimerClear = 1;
 
-	timer_tick(regs);
+	/*
+	 * the clock tick routines are only processed on the
+	 * primary CPU
+	 */
+	if (hard_smp_processor_id() == 0) {
+		nmi_tick();
+		timer_tick(regs);
+#ifdef CONFIG_SMP
+		smp_send_timer();
+#endif
+	}
+
+#ifdef CONFIG_SMP
+	/*
+	 * this is the ARM equivalent of the APIC timer interrupt
+	 */
+	update_process_times(user_mode(regs));
+#endif /* CONFIG_SMP */
 
 	write_sequnlock(&xtime_lock);
 
diff --git a/arch/arm/mach-integrator/headsmp.S b/arch/arm/mach-integrator/headsmp.S
new file mode 100644
index 00000000000000..ceaa88e30d708e
--- /dev/null
+++ b/arch/arm/mach-integrator/headsmp.S
@@ -0,0 +1,37 @@
+/*
+ *  linux/arch/arm/mach-integrator/headsmp.S
+ *
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * Integrator specific entry point for secondary CPUs.  This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(integrator_secondary_startup)
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	ldr	r6, [r6, r4]
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+1:	.long	.
+	.long	phys_pen_release
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 3b948e8c27513f..e0a01eef099345 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -83,7 +83,6 @@ static struct map_desc intcp_io_desc[] __initdata = {
  { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K,  MT_DEVICE },
  { IO_ADDRESS(INTEGRATOR_DBG_BASE),   INTEGRATOR_DBG_BASE,   SZ_4K,  MT_DEVICE },
  { IO_ADDRESS(INTEGRATOR_GPIO_BASE),  INTEGRATOR_GPIO_BASE,  SZ_4K,  MT_DEVICE },
- { 0xfc900000, 0xc9000000, SZ_4K, MT_DEVICE },
  { 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE },
  { 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE },
 };
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index d2c0ab21150c1c..f1436e683b493f 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -22,6 +22,8 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -85,4 +87,4 @@ static int __init leds_init(void)
 	return 0;
 }
 
-__initcall(leds_init);
+core_initcall(leds_init);
diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c
new file mode 100644
index 00000000000000..ead15dfcb53d14
--- /dev/null
+++ b/arch/arm/mach-integrator/platsmp.c
@@ -0,0 +1,192 @@
+/*
+ *  linux/arch/arm/mach-cintegrator/platsmp.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+
+#include <asm/atomic.h>
+#include <asm/delay.h>
+#include <asm/mmu_context.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+#include <asm/smp.h>
+
+extern void integrator_secondary_startup(void);
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __initdata pen_release = -1;
+unsigned long __initdata phys_pen_release = 0;
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __init platform_secondary_init(unsigned int cpu)
+{
+	/*
+	 * the primary core may have used a "cross call" soft interrupt
+	 * to get this processor out of WFI in the BootMonitor - make
+	 * sure that we are no longer being sent this soft interrupt
+	 */
+	smp_cross_call_done(cpumask_of_cpu(cpu));
+
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	secondary_scan_irqs();
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __init boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	pen_release = cpu;
+
+	/*
+	 * XXX
+	 *
+	 * This is a later addition to the booting protocol: the
+	 * bootMonitor now puts secondary cores into WFI, so
+	 * poke_milo() no longer gets the cores moving; we need
+	 * to send a soft interrupt to wake the secondary core.
+	 * Use smp_cross_call() for this, since there's little
+	 * point duplicating the code here
+	 */
+	smp_cross_call(cpumask_of_cpu(cpu));
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+static void __init poke_milo(void)
+{
+	extern void secondary_startup(void);
+
+	/* nobody is to be released from the pen yet */
+	pen_release = -1;
+
+	phys_pen_release = virt_to_phys(&pen_release);
+
+	/*
+	 * write the address of secondary startup into the system-wide
+	 * flags register, then clear the bottom two bits, which is what
+	 * BootMonitor is waiting for
+	 */
+#if 1
+#define CINTEGRATOR_HDR_FLAGSS_OFFSET 0x30
+	__raw_writel(virt_to_phys(integrator_secondary_startup),
+		     (IO_ADDRESS(INTEGRATOR_HDR_BASE) +
+		      CINTEGRATOR_HDR_FLAGSS_OFFSET));
+#define CINTEGRATOR_HDR_FLAGSC_OFFSET 0x34
+	__raw_writel(3,
+		     (IO_ADDRESS(INTEGRATOR_HDR_BASE) +
+		      CINTEGRATOR_HDR_FLAGSC_OFFSET));
+#endif
+
+	mb();
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = get_core_count();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	/* sanity check */
+	if (ncores == 0) {
+		printk(KERN_ERR
+		       "Integrator/CP: strange CM count of 0? Default to 1\n");
+
+		ncores = 1;
+	}
+
+	if (ncores > NR_CPUS) {
+		printk(KERN_WARNING
+		       "Integrator/CP: no. of cores (%d) greater than configured "
+		       "maximum of %d - clipping\n",
+		       ncores, NR_CPUS);
+		ncores = NR_CPUS;
+	}
+
+	/*
+	 * start with some more config for the Boot CPU, now that
+	 * the world is a bit more alive (which was not the case
+	 * when smp_prepare_boot_cpu() was called)
+	 */
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present mask - this tells us which CPUs should
+	 * be present.
+	 */
+	for (i = 0; i < max_cpus; i++) {
+		cpu_set(i, cpu_present_mask);
+	}
+
+	/*
+	 * Do we need any more CPUs? If so, then let them know where
+	 * to start. Note that, on modern versions of MILO, the "poke"
+	 * doesn't actually do anything until each individual core is
+	 * sent a soft interrupt to get it out of WFI
+	 */
+	if (max_cpus > 1)
+		poke_milo();
+}
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index dd012d6e2f5cae..f2c9e0d2b24b64 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/sysdev.h>
 #include <linux/major.h>
 #include <linux/fb.h>
 #include <linux/interrupt.h>
@@ -106,6 +107,35 @@ static void __init lubbock_init_irq(void)
 	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
 }
 
+#ifdef CONFIG_PM
+
+static int lubbock_irq_resume(struct sys_device *dev)
+{
+	LUB_IRQ_MASK_EN = lubbock_irq_enabled;
+	return 0;
+}
+
+static struct sysdev_class lubbock_irq_sysclass = {
+	set_kset_name("cpld_irq"),
+	.resume = lubbock_irq_resume,
+};
+
+static struct sys_device lubbock_irq_device = {
+	.cls = &lubbock_irq_sysclass,
+};
+
+static int __init lubbock_irq_device_init(void)
+{
+	int ret = sysdev_class_register(&lubbock_irq_sysclass);
+	if (ret == 0)
+		ret = sysdev_register(&lubbock_irq_device);
+	return ret;
+}
+
+device_initcall(lubbock_irq_device_init);
+
+#endif
+
 static int lubbock_udc_is_connected(void)
 {
 	return (LUB_MISC_RD & (1 << 9)) == 0;
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 6823ae28ae6a2c..9896afca751fc5 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -15,6 +15,7 @@
 
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/bitops.h>
@@ -62,7 +63,6 @@ static struct irqchip mainstone_irq_chip = {
 	.unmask		= mainstone_unmask_irq,
 };
 
-
 static void mainstone_irq_handler(unsigned int irq, struct irqdesc *desc,
 				  struct pt_regs *regs)
 {
@@ -100,6 +100,35 @@ static void __init mainstone_init_irq(void)
 	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
 }
 
+#ifdef CONFIG_PM
+
+static int mainstone_irq_resume(struct sys_device *dev)
+{
+	MST_INTMSKENA = mainstone_irq_enabled;
+	return 0;
+}
+
+static struct sysdev_class mainstone_irq_sysclass = {
+	set_kset_name("cpld_irq"),
+	.resume = mainstone_irq_resume,
+};
+
+static struct sys_device mainstone_irq_device = {
+	.cls = &mainstone_irq_sysclass,
+};
+
+static int __init mainstone_irq_device_init(void)
+{
+	int ret = sysdev_class_register(&mainstone_irq_sysclass);
+	if (ret == 0)
+		ret = sysdev_register(&mainstone_irq_device);
+	return ret;
+}
+
+device_initcall(mainstone_irq_device_init);
+
+#endif
+
 
 static struct resource smc91x_resources[] = {
 	[0] = {
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 9799fe80df2325..ac4dd4336160bc 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -133,6 +133,8 @@ static int pxa_pm_enter(suspend_state_t state)
 	/* *** go zzz *** */
 	pxa_cpu_pm_enter(state);
 
+	cpu_init();
+
 	/* after sleeping, validate the checksum */
 	checksum = 0;
 	for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 379ea5e3950f7d..59c7964cfe11d0 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -88,6 +88,8 @@ static int sa11x0_pm_enter(suspend_state_t state)
 	/* go zzz */
 	sa1100_cpu_suspend();
 
+	cpu_init();
+
 	/*
 	 * Ensure not to come back here if it wasn't intended
 	 */
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 554e1bd30d6e63..302c2a7b9b6374 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -543,7 +543,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb)
 		val |= SYS_CLCD_MODE_5551;
 		break;
 	case 6:
-		val |= SYS_CLCD_MODE_565_BLSB;
+		val |= SYS_CLCD_MODE_565_RLSB;
 		break;
 	case 8:
 		val |= SYS_CLCD_MODE_888;
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 6e6377a69d5bc5..54ce6da2264481 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -1083,6 +1083,23 @@ source "drivers/zorro/Kconfig"
 
 source kernel/power/Kconfig
 
+config SECCOMP
+	bool "Enable seccomp to safely compute untrusted bytecode"
+	depends on PROC_FS
+	default y
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via /proc/<pid>/seccomp, it cannot be disabled
+	  and the task is only allowed to execute a few safe syscalls
+	  defined by each seccomp mode.
+
+	  If unsure, say Y. Only embedded should say N here.
+
 endmenu
 
 config ISA_DMA_API
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index 5f075dbc4ee725..661523707e8c4c 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -202,7 +202,7 @@ _GLOBAL(DoSyscall)
 	rlwinm	r11,r11,0,~_TIFL_FORCE_NOERROR
 	stw	r11,TI_LOCAL_FLAGS(r10)
 	lwz	r11,TI_FLAGS(r10)
-	andi.	r11,r11,_TIF_SYSCALL_TRACE
+	andi.	r11,r11,_TIF_SYSCALL_T_OR_A
 	bne-	syscall_dotrace
 syscall_dotrace_cont:
 	cmplwi	0,r0,NR_syscalls
@@ -237,7 +237,7 @@ ret_from_syscall:
 	SYNC
 	MTMSRD(r10)
 	lwz	r9,TI_FLAGS(r12)
-	andi.	r0,r9,(_TIF_SYSCALL_TRACE|_TIF_SIGPENDING|_TIF_NEED_RESCHED)
+	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED)
 	bne-	syscall_exit_work
 syscall_exit_cont:
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
@@ -277,7 +277,8 @@ syscall_dotrace:
 	SAVE_NVGPRS(r1)
 	li	r0,0xc00
 	stw	r0,TRAP(r1)
-	bl	do_syscall_trace
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	do_syscall_trace_enter
 	lwz	r0,GPR0(r1)	/* Restore original registers */
 	lwz	r3,GPR3(r1)
 	lwz	r4,GPR4(r1)
@@ -291,7 +292,7 @@ syscall_dotrace:
 syscall_exit_work:
 	stw	r6,RESULT(r1)	/* Save result */
 	stw	r3,GPR3(r1)	/* Update return value */
-	andi.	r0,r9,_TIF_SYSCALL_TRACE
+	andi.	r0,r9,_TIF_SYSCALL_T_OR_A
 	beq	5f
 	ori	r10,r10,MSR_EE
 	SYNC
@@ -303,7 +304,8 @@ syscall_exit_work:
 	li	r4,0xc00
 	stw	r4,TRAP(r1)
 4:
-	bl	do_syscall_trace
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	do_syscall_trace_leave
 	REST_NVGPRS(r1)
 2:
 	lwz	r3,GPR3(r1)
@@ -627,8 +629,8 @@ sigreturn_exit:
 	subi	r1,r3,STACK_FRAME_OVERHEAD
 	rlwinm	r12,r1,0,0,18	/* current_thread_info() */
 	lwz	r9,TI_FLAGS(r12)
-	andi.	r0,r9,_TIF_SYSCALL_TRACE
-	bnel-	do_syscall_trace
+	andi.	r0,r9,_TIF_SYSCALL_T_OR_A
+	bnel-	do_syscall_trace_leave
 	/* fall through */
 
 	.globl	ret_from_except_full
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 2ccb58fe4fc3ca..d59ad07de8e7d8 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -55,7 +55,6 @@
 #define EXPORT_SYMTAB_STROPS
 
 extern void transfer_to_handler(void);
-extern void do_syscall_trace(void);
 extern void do_IRQ(struct pt_regs *regs);
 extern void MachineCheckException(struct pt_regs *regs);
 extern void AlignmentException(struct pt_regs *regs);
@@ -74,7 +73,6 @@ extern unsigned long mm_ptov (unsigned long paddr);
 EXPORT_SYMBOL(clear_pages);
 EXPORT_SYMBOL(clear_user_page);
 EXPORT_SYMBOL(do_signal);
-EXPORT_SYMBOL(do_syscall_trace);
 EXPORT_SYMBOL(transfer_to_handler);
 EXPORT_SYMBOL(do_IRQ);
 EXPORT_SYMBOL(MachineCheckException);
diff --git a/arch/ppc/kernel/ptrace.c b/arch/ppc/kernel/ptrace.c
index 59d59a8dc24967..e7aee4108dea69 100644
--- a/arch/ppc/kernel/ptrace.c
+++ b/arch/ppc/kernel/ptrace.c
@@ -27,6 +27,9 @@
 #include <linux/user.h>
 #include <linux/security.h>
 #include <linux/signal.h>
+#include <linux/seccomp.h>
+#include <linux/audit.h>
+#include <linux/module.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
@@ -455,11 +458,10 @@ out:
 	return ret;
 }
 
-void do_syscall_trace(void)
+static void do_syscall_trace(void)
 {
-        if (!test_thread_flag(TIF_SYSCALL_TRACE)
-	    || !(current->ptrace & PT_PTRACED))
-		return;
+	/* the 0x80 provides a way for the tracing parent to distinguish
+	   between a syscall stop and SIGTRAP delivery */
 	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
 				 ? 0x80 : 0));
 
@@ -473,3 +475,33 @@ void do_syscall_trace(void)
 		current->exit_code = 0;
 	}
 }
+
+void do_syscall_trace_enter(struct pt_regs *regs)
+{
+	if (test_thread_flag(TIF_SYSCALL_TRACE)
+	    && (current->ptrace & PT_PTRACED))
+		do_syscall_trace();
+
+	if (unlikely(current->audit_context))
+		audit_syscall_entry(current, AUDIT_ARCH_PPC,
+				    regs->gpr[0],
+				    regs->gpr[3], regs->gpr[4],
+				    regs->gpr[5], regs->gpr[6]);
+}
+
+void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	secure_computing(regs->gpr[0]);
+
+	if (unlikely(current->audit_context))
+		audit_syscall_exit(current,
+				   (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
+				   regs->result);
+
+	if ((test_thread_flag(TIF_SYSCALL_TRACE))
+	    && (current->ptrace & PT_PTRACED))
+		do_syscall_trace();
+}
+
+EXPORT_SYMBOL(do_syscall_trace_enter);
+EXPORT_SYMBOL(do_syscall_trace_leave);
diff --git a/arch/ppc64/defconfig b/arch/ppc64/defconfig
index 537b1cc82eab0b..2f31bf3046f901 100644
--- a/arch/ppc64/defconfig
+++ b/arch/ppc64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc3-bk6
-# Wed Feb  9 23:34:51 2005
+# Linux kernel version: 2.6.12-rc5-git9
+# Sun Jun  5 09:26:47 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
@@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_AUDIT is not set
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_CPUSETS=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -91,9 +96,12 @@ CONFIG_DISCONTIGMEM=y
 CONFIG_EEH=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_PPC_RTAS=y
+CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=m
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
 
 #
 # General setup
@@ -104,6 +112,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_PCI_LEGACY_PROC is not set
 # CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
 CONFIG_HOTPLUG_CPU=y
 
 #
@@ -112,10 +121,6 @@ CONFIG_HOTPLUG_CPU=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # PCI Hotplug Support
 #
 CONFIG_HOTPLUG_PCI=m
@@ -149,11 +154,10 @@ CONFIG_FW_LOADER=y
 #
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
 # CONFIG_PARPORT_SERIAL is not set
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
+# CONFIG_PARPORT_GSC is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -301,6 +305,7 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_ATA_PIIX is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
 # CONFIG_SCSI_SATA_SIS is not set
@@ -310,7 +315,6 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
@@ -327,7 +331,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -336,6 +339,7 @@ CONFIG_SCSI_QLA22XX=m
 CONFIG_SCSI_QLA2300=m
 CONFIG_SCSI_QLA2322=m
 CONFIG_SCSI_QLA6312=m
+CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 CONFIG_SCSI_DEBUG=m
@@ -358,6 +362,8 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
 
 #
 # Fusion MPT device support
@@ -405,6 +411,7 @@ CONFIG_IEEE1394_AMDTP=m
 #
 CONFIG_ADB=y
 CONFIG_ADB_PMU=y
+CONFIG_PMAC_SMU=y
 # CONFIG_PMAC_PBOOK is not set
 # CONFIG_PMAC_BACKLIGHT is not set
 # CONFIG_INPUT_ADBHID is not set
@@ -420,7 +427,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 CONFIG_NET_KEY=m
 CONFIG_INET=y
@@ -588,7 +594,6 @@ CONFIG_PCNET32=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -614,6 +619,8 @@ CONFIG_E1000=y
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -683,20 +690,6 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -716,6 +709,18 @@ CONFIG_INPUT_PCSPKR=m
 # CONFIG_INPUT_UINPUT is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
@@ -738,6 +743,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_ICOM=m
+CONFIG_SERIAL_JSM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -766,9 +772,16 @@ CONFIG_HVCS=m
 #
 # Ftape, the floppy tape device driver
 #
+# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -793,9 +806,9 @@ CONFIG_I2C_ALGOBIT=y
 CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
 CONFIG_I2C_KEYWEST=y
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -822,7 +835,9 @@ CONFIG_I2C_KEYWEST=y
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
@@ -833,9 +848,11 @@ CONFIG_I2C_KEYWEST=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -845,6 +862,7 @@ CONFIG_I2C_KEYWEST=y
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -877,6 +895,11 @@ CONFIG_I2C_KEYWEST=y
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+CONFIG_FB_MACMODES=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
@@ -890,9 +913,8 @@ CONFIG_FB_OF=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
-CONFIG_FB_RIVA=y
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
@@ -913,6 +935,7 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -946,6 +969,8 @@ CONFIG_LCD_DEVICE=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -956,8 +981,6 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -966,6 +989,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 
@@ -981,12 +1006,11 @@ CONFIG_USB_OHCI_HCD=y
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_RW_DETECT=y
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
@@ -1030,6 +1054,7 @@ CONFIG_USB_HIDDEV=y
 CONFIG_USB_PEGASUS=y
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1055,6 +1080,7 @@ CONFIG_USB_PEGASUS=y
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1276,10 +1302,13 @@ CONFIG_OPROFILE=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
@@ -1311,6 +1340,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m