[SPARC64]: Elminate all usage of hard-coded trap globals.

UltraSPARC has special sets of global registers which are switched to
for certain trap types.  There is one set for MMU related traps, one
set of Interrupt Vector processing, and another set (called the
Alternate globals) for all other trap types.

For what seems like forever we've hard coded the values in some of
these trap registers.  Some examples include:

1) Interrupt Vector global %g6 holds current processors interrupt
   work struct where received interrupts are managed for IRQ handler
   dispatch.

2) MMU global %g7 holds the base of the page tables of the currently
   active address space.

3) Alternate global %g6 held the current_thread_info() value.

Such hardcoding has resulted in some serious issues in many areas.
There are some code sequences where having another register available
would help clean up the implementation.  Taking traps such as
cross-calls from the OBP firmware requires some trick code sequences
wherein we have to save away and restore all of the special sets of
global registers when we enter/exit OBP.

We were also using the IMMU TSB register on SMP to hold the per-cpu
area base address, which doesn't work any longer now that we actually
use the TSB facility of the cpu.

The implementation is pretty straight forward.  One tricky bit is
getting the current processor ID as that is different on different cpu
variants.  We use a stub with a fancy calling convention which we
patch at boot time.  The calling convention is that the stub is
branched to and the (PC - 4) to return to is in register %g1.  The cpu
number is left in %g6.  This stub can be invoked by using the
__GET_CPUID macro.

We use an array of per-cpu trap state to store the current thread and
physical address of the current address space's page tables.  The
TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this
table, it uses __GET_CPUID and also clobbers %g1.

TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load
the current processor's IRQ software state into %g6.  It also uses
__GET_CPUID and clobbers %g1.

Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the
current address space's page tables into %g7, it clobbers %g1 and uses
__GET_CPUID.

Many refinements are possible, as well as some tuning, with this stuff
in place.

Signed-off-by: David S. Miller <davem@davemloft.net>

13 files changed, 192 insertions, 157 deletions

diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S
index a73553ae7e53b..906b64ffdb1bc 100644
--- a/arch/sparc64/kernel/entry.S
+++ b/arch/sparc64/kernel/entry.S
@@ -50,7 +50,8 @@ do_fpdis:
 	add		%g0, %g0, %g0
 	ba,a,pt		%xcc, rtrap_clr_l6
 
-1:	ldub		[%g6 + TI_FPSAVED], %g5
+1:	TRAP_LOAD_THREAD_REG
+	ldub		[%g6 + TI_FPSAVED], %g5
 	wr		%g0, FPRS_FEF, %fprs
 	andcc		%g5, FPRS_FEF, %g0
 	be,a,pt		%icc, 1f
@@ -189,6 +190,7 @@ fp_other_bounce:
 	.globl		do_fpother_check_fitos
 	.align		32
 do_fpother_check_fitos:
+	TRAP_LOAD_THREAD_REG
 	sethi		%hi(fp_other_bounce - 4), %g7
 	or		%g7, %lo(fp_other_bounce - 4), %g7
 
@@ -353,8 +355,6 @@ do_fptrap_after_fsr:
 	 *
 	 * With this method we can do most of the cross-call tlb/cache
 	 * flushing very quickly.
-	 *
-	 * Current CPU's IRQ worklist table is locked into %g6, don't touch.
 	 */
 	.text
 	.align		32
@@ -378,6 +378,8 @@ do_ivec:
 	sllx		%g2, %g4, %g2
 	sllx		%g4, 2, %g4
 
+	TRAP_LOAD_IRQ_WORK
+
 	lduw		[%g6 + %g4], %g5	/* g5 = irq_work(cpu, pil) */
 	stw		%g5, [%g3 + 0x00]	/* bucket->irq_chain = g5 */
 	stw		%g3, [%g6 + %g4]	/* irq_work(cpu, pil) = bucket */
@@ -488,9 +490,24 @@ setcc:
 	retl
 	 stx		%o1, [%o0 + PT_V9_TSTATE]
 
-	.globl		utrap, utrap_ill
-utrap:	brz,pn		%g1, etrap
+	.globl		utrap_trap
+utrap_trap:		/* %g3=handler,%g4=level */
+	TRAP_LOAD_THREAD_REG
+	ldx		[%g6 + TI_UTRAPS], %g1
+	brnz,pt		%g1, invoke_utrap
 	 nop
+
+	ba,pt		%xcc, etrap
+	 rd		%pc, %g7
+	mov		%l4, %o1
+        call		bad_trap
+	 add		%sp, PTREGS_OFF, %o0
+	ba,pt		%xcc, rtrap
+	 clr		%l6
+
+invoke_utrap:
+	sllx		%g3, 3, %g3
+	ldx		[%g1 + %g3], %g1
 	save		%sp, -128, %sp
 	rdpr		%tstate, %l6
 	rdpr		%cwp, %l7
@@ -500,17 +517,6 @@ utrap:	brz,pn		%g1, etrap
 	rdpr		%tnpc, %l7
 	wrpr		%g1, 0, %tnpc
 	done
-utrap_ill:
-        call		bad_trap
-	 add		%sp, PTREGS_OFF, %o0
-	ba,pt		%xcc, rtrap
-	 clr		%l6
-
-	/* XXX Here is stuff we still need to write... -DaveM XXX */
-	.globl		netbsd_syscall
-netbsd_syscall:
-	retl
-	 nop
 
 	/* We need to carefully read the error status, ACK
 	 * the errors, prevent recursive traps, and pass the
@@ -1001,7 +1007,7 @@ dcpe_icpe_tl1_common:
 	 * %g3:		scratch
 	 * %g4:		AFSR
 	 * %g5:		AFAR
-	 * %g6:		current thread ptr
+	 * %g6:		unused, will have current thread ptr after etrap
 	 * %g7:		scratch
 	 */
 __cheetah_log_error:
@@ -1690,3 +1696,85 @@ __flushw_user:
 	 restore	%g0, %g0, %g0
 2:	retl
 	 nop
+
+	/* Read cpu ID from hardware, return in %g6.
+	 * (callers_pc - 4) is in %g1.  Patched at boot time.
+	 *
+	 * Default is spitfire implementation.
+	 *
+	 * The instruction sequence needs to be 5 instructions
+	 * in order to fit the longest implementation, which is
+	 * currently starfire.
+	 */
+	.align		32
+	.globl		__get_cpu_id
+__get_cpu_id:
+	ldxa		[%g0] ASI_UPA_CONFIG, %g6
+	srlx		%g6, 17, %g6
+	jmpl		%g1 + 0x4, %g0
+	 and		%g6, 0x1f, %g6
+	nop
+
+__get_cpu_id_cheetah_safari:
+	ldxa		[%g0] ASI_SAFARI_CONFIG, %g6
+	srlx		%g6, 17, %g6
+	jmpl		%g1 + 0x4, %g0
+	 and		%g6, 0x3ff, %g6
+	nop
+
+__get_cpu_id_cheetah_jbus:
+	ldxa		[%g0] ASI_JBUS_CONFIG, %g6
+	srlx		%g6, 17, %g6
+	jmpl		%g1 + 0x4, %g0
+	 and		%g6, 0x1f, %g6
+	nop
+
+__get_cpu_id_starfire:
+	sethi		%hi(0x1fff40000d0 >> 9), %g6
+	sllx		%g6, 9, %g6
+	or		%g6, 0xd0, %g6
+	jmpl		%g1 + 0x4, %g0
+	 lduwa		[%g6] ASI_PHYS_BYPASS_EC_E, %g6
+
+	.globl		per_cpu_patch
+per_cpu_patch:
+	sethi		%hi(this_is_starfire), %o0
+	lduw		[%o0 + %lo(this_is_starfire)], %o1
+	sethi		%hi(__get_cpu_id_starfire), %o0
+	brnz,pn		%o1, 10f
+	 or		%o0, %lo(__get_cpu_id_starfire), %o0
+	sethi		%hi(tlb_type), %o0
+	lduw		[%o0 + %lo(tlb_type)], %o1
+	brz,pt		%o1, 11f
+	 nop
+	rdpr		%ver, %o0
+	srlx		%o0, 32, %o0
+	sethi		%hi(0x003e0016), %o1
+	or		%o1, %lo(0x003e0016), %o1
+	cmp		%o0, %o1
+	sethi		%hi(__get_cpu_id_cheetah_jbus), %o0
+	be,pn		%icc, 10f
+	 or		%o0, %lo(__get_cpu_id_cheetah_jbus), %o0
+	sethi		%hi(__get_cpu_id_cheetah_safari), %o0
+	or		%o0, %lo(__get_cpu_id_cheetah_safari), %o0
+10:
+	sethi		%hi(__get_cpu_id), %o1
+	or		%o1, %lo(__get_cpu_id), %o1
+	lduw		[%o0 + 0x00], %o2
+	stw		%o2, [%o1 + 0x00]
+	flush		%o1 + 0x00
+	lduw		[%o0 + 0x04], %o2
+	stw		%o2, [%o1 + 0x04]
+	flush		%o1 + 0x04
+	lduw		[%o0 + 0x08], %o2
+	stw		%o2, [%o1 + 0x08]
+	flush		%o1 + 0x08
+	lduw		[%o0 + 0x0c], %o2
+	stw		%o2, [%o1 + 0x0c]
+	flush		%o1 + 0x0c
+	lduw		[%o0 + 0x10], %o2
+	stw		%o2, [%o1 + 0x10]
+	flush		%o1 + 0x10
+11:
+	retl
+	 nop
diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S
index 567dbb765c349..8b3b6d720ed52 100644
--- a/arch/sparc64/kernel/etrap.S
+++ b/arch/sparc64/kernel/etrap.S
@@ -31,6 +31,7 @@
 		.globl	etrap, etrap_irq, etraptl1
 etrap:		rdpr	%pil, %g2
 etrap_irq:
+		TRAP_LOAD_THREAD_REG
 		rdpr	%tstate, %g1
 		sllx	%g2, 20, %g3
 		andcc	%g1, TSTATE_PRIV, %g0
@@ -98,11 +99,7 @@ etrap_irq:
 		stx	%i7, [%sp + PTREGS_OFF + PT_V9_I7]
 		wrpr	%g0, ETRAP_PSTATE2, %pstate
 		mov	%l6, %g6
-#ifdef CONFIG_SMP
-#error IMMU TSB usage must be fixed
-		mov	TSB_REG, %g3
-		ldxa	[%g3] ASI_IMMU, %g5
-#endif
+		LOAD_PER_CPU_BASE(%g4, %g3)
 		jmpl	%l2 + 0x4, %g0
 		 ldx	[%g6 + TI_TASK], %g4
 
@@ -126,6 +123,7 @@ etraptl1:	/* Save tstate/tpc/tnpc of TL 1-->4 and the tl register itself.
 		 *	0x58	TL4's TT
 		 *	0x60	TL
 		 */
+		TRAP_LOAD_THREAD_REG
 		sub	%sp, ((4 * 8) * 4) + 8, %g2
 		rdpr	%tl, %g1
 
@@ -179,7 +177,9 @@ etraptl1:	/* Save tstate/tpc/tnpc of TL 1-->4 and the tl register itself.
 
 		.align	64
 		.globl	scetrap
-scetrap:	rdpr	%pil, %g2
+scetrap:
+		TRAP_LOAD_THREAD_REG
+		rdpr	%pil, %g2
 		rdpr	%tstate, %g1
 		sllx	%g2, 20, %g3
 		andcc	%g1, TSTATE_PRIV, %g0
@@ -248,11 +248,7 @@ scetrap:	rdpr	%pil, %g2
 		stx	%i6, [%sp + PTREGS_OFF + PT_V9_I6]
 		mov	%l6, %g6
 		stx	%i7, [%sp + PTREGS_OFF + PT_V9_I7]
-#ifdef CONFIG_SMP
-#error IMMU TSB usage must be fixed
-		mov	TSB_REG, %g3
-		ldxa	[%g3] ASI_IMMU, %g5
-#endif
+		LOAD_PER_CPU_BASE(%g4, %g3)
 		ldx	[%g6 + TI_TASK], %g4
 		done
 
diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S
index d00e20693be10..82ce5bced9c70 100644
--- a/arch/sparc64/kernel/head.S
+++ b/arch/sparc64/kernel/head.S
@@ -26,6 +26,7 @@
 #include <asm/head.h>
 #include <asm/ttable.h>
 #include <asm/mmu.h>
+#include <asm/cpudata.h>
 	
 /* This section from from _start to sparc64_boot_end should fit into
  * 0x0000000000404000 to 0x0000000000408000.
@@ -421,24 +422,6 @@ setup_trap_table:
 	stxa	%g2, [%g1] ASI_DMMU
 	membar	#Sync
 
-	/* The Linux trap handlers expect various trap global registers
-	 * to be setup with some fixed values.  So here we set these
-	 * up very carefully.  These globals are:
-	 *
-	 * Alternate Globals (PSTATE_AG):
-	 *
-	 * %g6			--> current_thread_info()
-	 *
-	 * Interrupt Globals (PSTATE_IG, setup by init_irqwork_curcpu()):
-	 *
-	 * %g6			--> __irq_work[smp_processor_id()]
-	 */
-
-	rdpr	%pstate, %o1
-	mov	%g6, %o2
-	wrpr	%o1, PSTATE_AG, %pstate
-	mov	%o2, %g6
-
 	/* Kill PROM timer */
 	sethi	%hi(0x80000000), %o2
 	sllx	%o2, 32, %o2
@@ -457,7 +440,6 @@ setup_trap_table:
 
 2:
 	wrpr	%g0, %g0, %wstate
-	wrpr	%o1, 0x0, %pstate
 
 	call	init_irqwork_curcpu
 	 nop
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index f7490ef629b93..3e48af2769d48 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -848,33 +848,9 @@ static void kill_prom_timer(void)
 
 void init_irqwork_curcpu(void)
 {
-	register struct irq_work_struct *workp asm("o2");
-	register unsigned long tmp asm("o3");
 	int cpu = hard_smp_processor_id();
 
-	memset(__irq_work + cpu, 0, sizeof(*workp));
-
-	/* Make sure we are called with PSTATE_IE disabled.  */
-	__asm__ __volatile__("rdpr	%%pstate, %0\n\t"
-			     : "=r" (tmp));
-	if (tmp & PSTATE_IE) {
-		prom_printf("BUG: init_irqwork_curcpu() called with "
-			    "PSTATE_IE enabled, bailing.\n");
-		__asm__ __volatile__("mov	%%i7, %0\n\t"
-				     : "=r" (tmp));
-		prom_printf("BUG: Called from %lx\n", tmp);
-		prom_halt();
-	}
-
-	/* Set interrupt globals.  */
-	workp = &__irq_work[cpu];
-	__asm__ __volatile__(
-	"rdpr	%%pstate, %0\n\t"
-	"wrpr	%0, %1, %%pstate\n\t"
-	"mov	%2, %%g6\n\t"
-	"wrpr	%0, 0x0, %%pstate\n\t"
-	: "=&r" (tmp)
-	: "i" (PSTATE_IG), "r" (workp));
+	memset(__irq_work + cpu, 0, sizeof(struct irq_work_struct));
 }
 
 /* Only invoked on boot processor. */
diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S
index 213eb4a9d8a41..5a62ec5d531cd 100644
--- a/arch/sparc64/kernel/rtrap.S
+++ b/arch/sparc64/kernel/rtrap.S
@@ -223,12 +223,10 @@ rt_continue:	ldx			[%sp + PTREGS_OFF + PT_V9_G1], %g1
 		ldx			[%sp + PTREGS_OFF + PT_V9_G3], %g3
 		ldx			[%sp + PTREGS_OFF + PT_V9_G4], %g4
 		ldx			[%sp + PTREGS_OFF + PT_V9_G5], %g5
-#ifdef CONFIG_SMP
-#error IMMU TSB usage must be fixed
-		mov			TSB_REG, %g6
-		brnz,a,pn		%l3, 1f
-		 ldxa			[%g6] ASI_IMMU, %g5
-#endif
+		brz,pt			%l3, 1f
+		 nop
+		/* Must do this before thread reg is clobbered below.  */
+		LOAD_PER_CPU_BASE(%g6, %g7)
 1:
 		ldx			[%sp + PTREGS_OFF + PT_V9_G6], %g6
 		ldx			[%sp + PTREGS_OFF + PT_V9_G7], %g7
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index 158bd31e15b79..59a70301a6cf6 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -507,6 +507,11 @@ void __init setup_arch(char **cmdline_p)
 	/* Work out if we are starfire early on */
 	check_if_starfire();
 
+	/* Now we know enough to patch the __get_cpu_id()
+	 * trampoline used by trap code.
+	 */
+	per_cpu_patch();
+
 	boot_flags_init(*cmdline_p);
 
 	idprom_init();
@@ -545,6 +550,9 @@ void __init setup_arch(char **cmdline_p)
 	smp_setup_cpu_possible_map();
 
 	paging_init();
+
+	/* Get boot processor trap_block[] setup.  */
+	init_cur_cpu_trap();
 }
 
 static int __init set_preferred_console(void)
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index d2d3369e7b5dc..8c245859d2126 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -38,6 +38,7 @@
 #include <asm/timer.h>
 #include <asm/starfire.h>
 #include <asm/tlb.h>
+#include <asm/sections.h>
 
 extern void calibrate_delay(void);
 
@@ -87,10 +88,6 @@ void __init smp_store_cpu_info(int id)
 	cpu_data(id).clock_tick = prom_getintdefault(cpu_node,
 						     "clock-frequency", 0);
 
-	cpu_data(id).pgcache_size		= 0;
-	cpu_data(id).pte_cache[0]		= NULL;
-	cpu_data(id).pte_cache[1]		= NULL;
-	cpu_data(id).pgd_cache			= NULL;
 	cpu_data(id).idle_volume		= 1;
 
 	cpu_data(id).dcache_size = prom_getintdefault(cpu_node, "dcache-size",
@@ -121,26 +118,15 @@ static volatile unsigned long callin_flag = 0;
 
 extern void inherit_locked_prom_mappings(int save_p);
 
-static inline void cpu_setup_percpu_base(unsigned long cpu_id)
-{
-#error IMMU TSB usage must be fixed
-	__asm__ __volatile__("mov	%0, %%g5\n\t"
-			     "stxa	%0, [%1] %2\n\t"
-			     "membar	#Sync"
-			     : /* no outputs */
-			     : "r" (__per_cpu_offset(cpu_id)),
-			       "r" (TSB_REG), "i" (ASI_IMMU));
-}
-
 void __init smp_callin(void)
 {
 	int cpuid = hard_smp_processor_id();
 
 	inherit_locked_prom_mappings(0);
 
-	__flush_tlb_all();
+	__local_per_cpu_offset = __per_cpu_offset(cpuid);
 
-	cpu_setup_percpu_base(cpuid);
+	__flush_tlb_all();
 
 	smp_setup_percpu_timer();
 
@@ -1107,12 +1093,15 @@ void __init smp_setup_cpu_possible_map(void)
 
 void __devinit smp_prepare_boot_cpu(void)
 {
-	if (hard_smp_processor_id() >= NR_CPUS) {
+	int cpu = hard_smp_processor_id();
+
+	if (cpu >= NR_CPUS) {
 		prom_printf("Serious problem, boot cpu id >= NR_CPUS\n");
 		prom_halt();
 	}
 
-	current_thread_info()->cpu = hard_smp_processor_id();
+	current_thread_info()->cpu = cpu;
+	__local_per_cpu_offset = __per_cpu_offset(cpu);
 
 	cpu_set(smp_processor_id(), cpu_online_map);
 	cpu_set(smp_processor_id(), phys_cpu_present_map);
@@ -1173,12 +1162,9 @@ void __init setup_per_cpu_areas(void)
 {
 	unsigned long goal, size, i;
 	char *ptr;
-	/* Created by linker magic */
-	extern char __per_cpu_start[], __per_cpu_end[];
 
 	/* Copy section for each CPU (we discard the original) */
-	goal = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE);
-
+	goal = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES);
 #ifdef CONFIG_MODULES
 	if (goal < PERCPU_ENOUGH_ROOM)
 		goal = PERCPU_ENOUGH_ROOM;
@@ -1187,31 +1173,10 @@ void __init setup_per_cpu_areas(void)
 	for (size = 1UL; size < goal; size <<= 1UL)
 		__per_cpu_shift++;
 
-	/* Make sure the resulting __per_cpu_base value
-	 * will fit in the 43-bit sign extended IMMU
-	 * TSB register.
-	 */
-	ptr = __alloc_bootmem(size * NR_CPUS, PAGE_SIZE,
-			      (unsigned long) __per_cpu_start);
+	ptr = alloc_bootmem(size * NR_CPUS);
 
 	__per_cpu_base = ptr - __per_cpu_start;
 
-	if ((__per_cpu_shift < PAGE_SHIFT) ||
-	    (__per_cpu_base & ~PAGE_MASK) ||
-	    (__per_cpu_base != (((long) __per_cpu_base << 20) >> 20))) {
-		prom_printf("PER_CPU: Invalid layout, "
-			    "ptr[%p] shift[%lx] base[%lx]\n",
-			    ptr, __per_cpu_shift, __per_cpu_base);
-		prom_halt();
-	}
-
 	for (i = 0; i < NR_CPUS; i++, ptr += size)
 		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
-
-	/* Finally, load in the boot cpu's base value.
-	 * We abuse the IMMU TSB register for trap handler
-	 * entry and exit loading of %g5.  That is why it
-	 * has to be page aligned.
-	 */
-	cpu_setup_percpu_base(hard_smp_processor_id());
 }
diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S
index 782d8c4973e45..18c333f841e3e 100644
--- a/arch/sparc64/kernel/trampoline.S
+++ b/arch/sparc64/kernel/trampoline.S
@@ -287,21 +287,18 @@ do_unlock:
 	wrpr		%g0, 0, %wstate
 	wrpr		%g0, 0, %tl
 
-	/* Setup the trap globals, then we can resurface. */
-	rdpr		%pstate, %o1
-	mov		%g6, %o2
-	wrpr		%o1, PSTATE_AG, %pstate
+	/* Load TBA, then we can resurface. */
 	sethi		%hi(sparc64_ttable_tl0), %g5
 	wrpr		%g5, %tba
-	mov		%o2, %g6
 
-	wrpr		%o1, 0x0, %pstate
 	ldx		[%g6 + TI_TASK], %g4
 
 	wrpr		%g0, 0, %wstate
 
 	call		init_irqwork_curcpu
 	 nop
+	call		init_cur_cpu_trap
+	 nop
 
 	/* Start using proper page size encodings in ctx register.  */
 	sethi	%hi(sparc64_kern_pri_context), %g3
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index 8d44ae5a15e32..f47f4874253cb 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -2130,7 +2130,22 @@ void do_getpsr(struct pt_regs *regs)
 	}
 }
 
+struct trap_per_cpu trap_block[NR_CPUS];
+
+/* This can get invoked before sched_init() so play it super safe
+ * and use hard_smp_processor_id().
+ */
+void init_cur_cpu_trap(void)
+{
+	int cpu = hard_smp_processor_id();
+	struct trap_per_cpu *p = &trap_block[cpu];
+
+	p->thread = current_thread_info();
+	p->pgd_paddr = 0;
+}
+
 extern void thread_info_offsets_are_bolixed_dave(void);
+extern void trap_per_cpu_offsets_are_bolixed_dave(void);
 
 /* Only invoked on boot processor. */
 void __init trap_init(void)
@@ -2165,6 +2180,10 @@ void __init trap_init(void)
 	    (TI_FPREGS & (64 - 1)))
 		thread_info_offsets_are_bolixed_dave();
 
+	if (TRAP_PER_CPU_THREAD != offsetof(struct trap_per_cpu, thread) ||
+	    TRAP_PER_CPU_PGD_PADDR != offsetof(struct trap_per_cpu, pgd_paddr))
+		trap_per_cpu_offsets_are_bolixed_dave();
+
 	/* Attach to the address space of init_task.  On SMP we
 	 * do this in smp.c:smp_callin for other cpus.
 	 */
diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S
index 44b9e6fed09fc..50752c518773d 100644
--- a/arch/sparc64/kernel/tsb.S
+++ b/arch/sparc64/kernel/tsb.S
@@ -36,6 +36,15 @@ tsb_miss_itlb:
 	 nop
 
 tsb_miss_page_table_walk:
+	/* This clobbers %g1 and %g6, preserve them... */
+	mov		%g1, %g5
+	mov		%g6, %g2
+
+	TRAP_LOAD_PGD_PHYS
+
+	mov		%g2, %g6
+	mov		%g5, %g1
+
 	USER_PGTABLE_WALK_TL1(%g4, %g7, %g5, %g2, tsb_do_fault)
 
 tsb_reload:
@@ -112,15 +121,20 @@ winfix_trampoline:
 	 * %o0: page table physical address
 	 * %o1:	TSB address
 	 */
+	.align	32
 	.globl	tsb_context_switch
 tsb_context_switch:
-	wrpr	%g0, PSTATE_MG | PSTATE_RMO | PSTATE_PEF | PSTATE_PRIV, %pstate
+	rdpr	%pstate, %o5
+	wrpr	%o5, PSTATE_IE, %pstate
 
-	/* Set page table base alternate global.  */
-	mov	%o0, %g7
+	ldub	[%g6 + TI_CPU], %o3
+	sethi	%hi(trap_block), %o4
+	sllx	%o3, TRAP_BLOCK_SZ_SHIFT, %o3
+	or	%o4, %lo(trap_block), %o4
+	add	%o4, %o3, %o4
+	stx	%o0, [%o4 + TRAP_PER_CPU_PGD_PADDR]
 
-	/* XXX can this happen?  */
-	brz,pn	%o1, 9f
+	brgez	%o1, 9f
 	 nop
 
 	/* Lock TSB into D-TLB.  */
@@ -163,7 +177,7 @@ tsb_context_switch:
 	membar		#Sync
 
 9:
-	wrpr	%g0, PSTATE_RMO | PSTATE_PEF | PSTATE_PRIV | PSTATE_IE, %pstate
+	wrpr	%o5, %pstate
 
 	retl
 	 mov	%o2, %o0
diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S
index 56f060c8fbf0f..2fb7a33993c0d 100644
--- a/arch/sparc64/kernel/ttable.S
+++ b/arch/sparc64/kernel/ttable.S
@@ -128,7 +128,7 @@ tl0_flushw:	FLUSH_WINDOW_TRAP
 tl0_resv104:	BTRAP(0x104) BTRAP(0x105) BTRAP(0x106) BTRAP(0x107)
 		.globl tl0_solaris
 tl0_solaris:	SOLARIS_SYSCALL_TRAP
-tl0_netbsd:	NETBSD_SYSCALL_TRAP
+tl0_resv109:	BTRAP(0x109)
 tl0_resv10a:	BTRAP(0x10a) BTRAP(0x10b) BTRAP(0x10c) BTRAP(0x10d) BTRAP(0x10e)
 tl0_resv10f:	BTRAP(0x10f)
 tl0_linux32:	LINUX_32BIT_SYSCALL_TRAP
diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S
index f5d93aa99cbb1..de588036df430 100644
--- a/arch/sparc64/kernel/winfixup.S
+++ b/arch/sparc64/kernel/winfixup.S
@@ -39,6 +39,7 @@ set_pcontext:
 	 */
 	.globl	fill_fixup, spill_fixup
 fill_fixup:
+	TRAP_LOAD_THREAD_REG
 	rdpr		%tstate, %g1
 	andcc		%g1, TSTATE_PRIV, %g0
 	or		%g4, FAULT_CODE_WINFIXUP, %g4
@@ -84,11 +85,7 @@ fill_fixup:
 	wrpr		%l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate
 	mov		%o7, %g6
 	ldx		[%g6 + TI_TASK], %g4
-#ifdef CONFIG_SMP
-#error IMMU TSB usage must be fixed
-	mov		TSB_REG, %g1
-	ldxa		[%g1] ASI_IMMU, %g5
-#endif
+	LOAD_PER_CPU_BASE(%g1, %g2)
 
 	/* This is the same as below, except we handle this a bit special
 	 * since we must preserve %l5 and %l6, see comment above.
@@ -107,6 +104,7 @@ fill_fixup:
 	 * do not touch %g7 or %g2 so we handle the two cases fine.
 	 */
 spill_fixup:
+	TRAP_LOAD_THREAD_REG
 	ldx		[%g6 + TI_FLAGS], %g1
 	andcc		%g1, _TIF_32BIT, %g0
 	ldub		[%g6 + TI_WSAVED], %g1
@@ -182,6 +180,7 @@ winfix_mna:
 	wrpr		%g3, %tnpc
 	done
 fill_fixup_mna:
+	TRAP_LOAD_THREAD_REG
 	rdpr		%tstate, %g1
 	andcc		%g1, TSTATE_PRIV, %g0
 	be,pt		%xcc, window_mna_from_user_common
@@ -209,17 +208,14 @@ fill_fixup_mna:
 	wrpr		%l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate
 	mov		%o7, %g6			! Get current back.
 	ldx		[%g6 + TI_TASK], %g4		! Finish it.
-#ifdef CONFIG_SMP
-#error IMMU TSB usage must be fixed
-	mov		TSB_REG, %g1
-	ldxa		[%g1] ASI_IMMU, %g5
-#endif
+	LOAD_PER_CPU_BASE(%g1, %g2)
 	call		mem_address_unaligned
 	 add		%sp, PTREGS_OFF, %o0
 
 	b,pt		%xcc, rtrap
 	 nop						! yes, the nop is correct
 spill_fixup_mna:
+	TRAP_LOAD_THREAD_REG
 	ldx		[%g6 + TI_FLAGS], %g1
 	andcc		%g1, _TIF_32BIT, %g0
 	ldub		[%g6 + TI_WSAVED], %g1
@@ -287,6 +283,7 @@ winfix_dax:
 	wrpr		%g3, %tnpc
 	done
 fill_fixup_dax:
+	TRAP_LOAD_THREAD_REG
 	rdpr		%tstate, %g1
 	andcc		%g1, TSTATE_PRIV, %g0
 	be,pt		%xcc, window_dax_from_user_common
@@ -314,17 +311,14 @@ fill_fixup_dax:
 	wrpr		%l1, (PSTATE_IE | PSTATE_AG | PSTATE_RMO), %pstate
 	mov		%o7, %g6			! Get current back.
 	ldx		[%g6 + TI_TASK], %g4		! Finish it.
-#ifdef CONFIG_SMP
-#error IMMU TSB usage must be fixed
-	mov		TSB_REG, %g1
-	ldxa		[%g1] ASI_IMMU, %g5
-#endif
+	LOAD_PER_CPU_BASE(%g1, %g2)
 	call		spitfire_data_access_exception
 	 add		%sp, PTREGS_OFF, %o0
 
 	b,pt		%xcc, rtrap
 	 nop						! yes, the nop is correct
 spill_fixup_dax:
+	TRAP_LOAD_THREAD_REG
 	ldx		[%g6 + TI_FLAGS], %g1
 	andcc		%g1, _TIF_32BIT, %g0
 	ldub		[%g6 + TI_WSAVED], %g1
diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S
index 22791f29552e5..a87394824ec2d 100644
--- a/arch/sparc64/mm/ultra.S
+++ b/arch/sparc64/mm/ultra.S
@@ -295,12 +295,10 @@ cheetah_patch_cachetlbops:
 	 *   %g1	address arg 1	(tlb page and range flushes)
 	 *   %g7	address arg 2	(tlb range flush only)
 	 *
-	 *   %g6	ivector table, don't touch
-	 *   %g2	scratch 1
-	 *   %g3	scratch 2
-	 *   %g4	scratch 3
-	 *
-	 * TODO: Make xcall TLB range flushes use the tricks above... -DaveM
+	 *   %g6	scratch 1
+	 *   %g2	scratch 2
+	 *   %g3	scratch 3
+	 *   %g4	scratch 4
 	 */
 	.align		32
 	.globl		xcall_flush_tlb_mm