[POWERPC] cell: add RAS support

This is a first version of support for the Cell BE "Reliability,
Availability and Serviceability" features.

It doesn't yet handle some of the RAS interrupts (the ones described in
iic_is/iic_irr), I'm still working on a proper way to expose these. They
are essentially a cascaded controller by themselves (sic !) though I may
just handle them locally to the iic driver. I need also to sync with
David Erb on the way he hooked in the performance monitor interrupt.

So that's all for 2.6.17 and I'll do more work on that with my rework of
the powerpc interrupt layer that I'm hacking on at the moment.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 129 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h
new file mode 100644
index 00000000000000..e76e4a6af5bc19
--- /dev/null
+++ b/arch/powerpc/platforms/cell/cbe_regs.h
@@ -0,0 +1,129 @@
+/*
+ * cbe_regs.h
+ *
+ * This file is intended to hold the various register definitions for CBE
+ * on-chip system devices (memory controller, IO controller, etc...)
+ *
+ * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ */
+
+#ifndef CBE_REGS_H
+#define CBE_REGS_H
+
+/*
+ *
+ * Some HID register definitions
+ *
+ */
+
+/* CBE specific HID0 bits */
+#define HID0_CBE_THERM_WAKEUP	0x0000020000000000ul
+#define HID0_CBE_SYSERR_WAKEUP	0x0000008000000000ul
+#define HID0_CBE_THERM_INT_EN	0x0000000400000000ul
+#define HID0_CBE_SYSERR_INT_EN	0x0000000200000000ul
+
+
+/*
+ *
+ * Pervasive unit register definitions
+ *
+ */
+
+struct cbe_pmd_regs {
+	u8 pad_0x0000_0x0800[0x0800 - 0x0000];			/* 0x0000 */
+
+	/* Thermal Sensor Registers */
+	u64  ts_ctsr1;						/* 0x0800 */
+	u64  ts_ctsr2;						/* 0x0808 */
+	u64  ts_mtsr1;						/* 0x0810 */
+	u64  ts_mtsr2;						/* 0x0818 */
+	u64  ts_itr1;						/* 0x0820 */
+	u64  ts_itr2;						/* 0x0828 */
+	u64  ts_gitr;						/* 0x0830 */
+	u64  ts_isr;						/* 0x0838 */
+	u64  ts_imr;						/* 0x0840 */
+	u64  tm_cr1;						/* 0x0848 */
+	u64  tm_cr2;						/* 0x0850 */
+	u64  tm_simr;						/* 0x0858 */
+	u64  tm_tpr;						/* 0x0860 */
+	u64  tm_str1;						/* 0x0868 */
+	u64  tm_str2;						/* 0x0870 */
+	u64  tm_tsr;						/* 0x0878 */
+
+	/* Power Management */
+	u64  pm_control;					/* 0x0880 */
+#define CBE_PMD_PAUSE_ZERO_CONTROL		0x10000
+	u64  pm_status;						/* 0x0888 */
+
+	/* Time Base Register */
+	u64  tbr;						/* 0x0890 */
+
+	u8   pad_0x0898_0x0c00 [0x0c00 - 0x0898];		/* 0x0898 */
+
+	/* Fault Isolation Registers */
+	u64  checkstop_fir;					/* 0x0c00 */
+	u64  recoverable_fir;
+	u64  spec_att_mchk_fir;
+	u64  fir_mode_reg;
+	u64  fir_enable_mask;
+
+	u8   pad_0x0c28_0x1000 [0x1000 - 0x0c28];		/* 0x0c28 */
+};
+
+extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
+extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu);
+
+/*
+ *
+ * IIC unit register definitions
+ *
+ */
+
+struct cbe_iic_pending_bits {
+	u32 data;
+	u8 flags;
+	u8 class;
+	u8 source;
+	u8 prio;
+};
+
+#define CBE_IIC_IRQ_VALID	0x80
+#define CBE_IIC_IRQ_IPI		0x40
+
+struct cbe_iic_thread_regs {
+	struct cbe_iic_pending_bits pending;
+	struct cbe_iic_pending_bits pending_destr;
+	u64 generate;
+	u64 prio;
+};
+
+struct cbe_iic_regs {
+	u8	pad_0x0000_0x0400[0x0400 - 0x0000];		/* 0x0000 */
+
+	/* IIC interrupt registers */
+	struct	cbe_iic_thread_regs thread[2];			/* 0x0400 */
+	u64     iic_ir;						/* 0x0440 */
+	u64     iic_is;						/* 0x0448 */
+
+	u8	pad_0x0450_0x0500[0x0500 - 0x0450];		/* 0x0450 */
+
+	/* IOC FIR */
+	u64	ioc_fir_reset;					/* 0x0500 */
+	u64	ioc_fir_set;
+	u64	ioc_checkstop_enable;
+	u64	ioc_fir_error_mask;
+	u64	ioc_syserr_enable;
+	u64	ioc_fir;
+
+	u8	pad_0x0530_0x1000[0x1000 - 0x0530];		/* 0x0530 */
+};
+
+extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np);
+extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu);
+
+
+/* Init this module early */
+extern void cbe_regs_init(void);
+
+
+#endif /* CBE_REGS_H */