powerpc/64s/hash: Convert SLB miss handlers to C

This patch moves SLB miss handlers completely to C, using the standard
exception handler macros to set up the stack and branch to C.

This can be done because the segment containing the kernel stack is
always bolted, so accessing it with relocation on will not cause an
SLB exception.

Arbitrary kernel memory must not be accessed when handling kernel
space SLB misses, so care should be taken there. However user SLB
misses can access any kernel memory, which can be used to move some
fields out of the paca (in later patches).

User SLB misses could quite easily reconcile IRQs and set up a first
class kernel environment and exit via ret_from_except, however that
doesn't seem to be necessary at the moment, so we only do that if a
bad fault is encountered.

[ Credit to Aneesh for bug fixes, error checks, and improvements to
  bad address handling, etc ]

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Disallow tracing for all of slb.c for now.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

1 files changed, 0 insertions, 335 deletions

diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
deleted file mode 100644
index 4d2e921d696e81..00000000000000
--- a/arch/powerpc/mm/slb_low.S
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * Low-level SLB routines
- *
- * Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM
- *
- * Based on earlier C version:
- * Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com
- *    Copyright (c) 2001 Dave Engebretsen
- * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <asm/processor.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/cputable.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/firmware.h>
-#include <asm/feature-fixups.h>
-
-/*
- * This macro generates asm code to compute the VSID scramble
- * function.  Used in slb_allocate() and do_stab_bolted.  The function
- * computed is: (protovsid*VSID_MULTIPLIER) % VSID_MODULUS
- *
- *	rt = register containing the proto-VSID and into which the
- *		VSID will be stored
- *	rx = scratch register (clobbered)
- *	rf = flags
- *
- *	- rt and rx must be different registers
- *	- The answer will end up in the low VSID_BITS bits of rt.  The higher
- *	  bits may contain other garbage, so you may need to mask the
- *	  result.
- */
-#define ASM_VSID_SCRAMBLE(rt, rx, rf, size)				\
-	lis	rx,VSID_MULTIPLIER_##size@h;				\
-	ori	rx,rx,VSID_MULTIPLIER_##size@l;				\
-	mulld	rt,rt,rx;		/* rt = rt * MULTIPLIER */	\
-/*									\
- * powermac get slb fault before feature fixup, so make 65 bit part     \
- * the default part of feature fixup					\
- */									\
-BEGIN_MMU_FTR_SECTION							\
-	srdi	rx,rt,VSID_BITS_65_##size;				\
-	clrldi	rt,rt,(64-VSID_BITS_65_##size);				\
-	add	rt,rt,rx;						\
-	addi	rx,rt,1;						\
-	srdi	rx,rx,VSID_BITS_65_##size;				\
-	add	rt,rt,rx;						\
-	rldimi	rf,rt,SLB_VSID_SHIFT_##size,(64 - (SLB_VSID_SHIFT_##size + VSID_BITS_65_##size)); \
-MMU_FTR_SECTION_ELSE							\
-	srdi	rx,rt,VSID_BITS_##size;					\
-	clrldi	rt,rt,(64-VSID_BITS_##size);				\
-	add	rt,rt,rx;		/* add high and low bits */	\
-	addi	rx,rt,1;						\
-	srdi	rx,rx,VSID_BITS_##size;	/* extract 2^VSID_BITS bit */	\
-	add	rt,rt,rx;						\
-	rldimi	rf,rt,SLB_VSID_SHIFT_##size,(64 - (SLB_VSID_SHIFT_##size + VSID_BITS_##size)); \
-ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_68_BIT_VA)
-
-
-/* void slb_allocate(unsigned long ea);
- *
- * Create an SLB entry for the given EA (user or kernel).
- * 	r3 = faulting address, r13 = PACA
- *	r9, r10, r11 are clobbered by this function
- *	r3 is preserved.
- * No other registers are examined or changed.
- */
-_GLOBAL(slb_allocate)
-	/*
-	 * Check if the address falls within the range of the first context, or
-	 * if we may need to handle multi context. For the first context we
-	 * allocate the slb entry via the fast path below. For large address we
-	 * branch out to C-code and see if additional contexts have been
-	 * allocated.
-	 * The test here is:
-	 *   (ea & ~REGION_MASK) >= (1ull << MAX_EA_BITS_PER_CONTEXT)
-	 */
-	rldicr. r9,r3,4,(63 - MAX_EA_BITS_PER_CONTEXT - 4)
-	bne-	8f
-
-	srdi	r9,r3,60		/* get region */
-	srdi	r10,r3,SID_SHIFT	/* get esid */
-	cmpldi	cr7,r9,0xc		/* cmp PAGE_OFFSET for later use */
-
-	/* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */
-	blt	cr7,0f			/* user or kernel? */
-
-	/* Check if hitting the linear mapping or some other kernel space
-	*/
-	bne	cr7,1f
-
-	/* Linear mapping encoding bits, the "li" instruction below will
-	 * be patched by the kernel at boot
-	 */
-.globl slb_miss_kernel_load_linear
-slb_miss_kernel_load_linear:
-	li	r11,0
-	/*
-	 * context = (ea >> 60) - (0xc - 1)
-	 * r9 = region id.
-	 */
-	subi	r9,r9,KERNEL_REGION_CONTEXT_OFFSET
-
-BEGIN_FTR_SECTION
-	b	.Lslb_finish_load
-END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
-	b	.Lslb_finish_load_1T
-
-1:
-#ifdef CONFIG_SPARSEMEM_VMEMMAP
-	cmpldi	cr0,r9,0xf
-	bne	1f
-/* Check virtual memmap region. To be patched at kernel boot */
-.globl slb_miss_kernel_load_vmemmap
-slb_miss_kernel_load_vmemmap:
-	li	r11,0
-	b	6f
-1:
-#endif /* CONFIG_SPARSEMEM_VMEMMAP */
-
-	/*
-	 * r10 contains the ESID, which is the original faulting EA shifted
-	 * right by 28 bits. We need to compare that with (H_VMALLOC_END >> 28)
-	 * which is 0xd00038000. That can't be used as an immediate, even if we
-	 * ignored the 0xd, so we have to load it into a register, and we only
-	 * have one register free. So we must load all of (H_VMALLOC_END >> 28)
-	 * into a register and compare ESID against that.
-	 */
-	lis	r11,(H_VMALLOC_END >> 32)@h	// r11 = 0xffffffffd0000000
-	ori	r11,r11,(H_VMALLOC_END >> 32)@l	// r11 = 0xffffffffd0003800
-	// Rotate left 4, then mask with 0xffffffff0
-	rldic	r11,r11,4,28			// r11 = 0xd00038000
-	cmpld	r10,r11				// if r10 >= r11
-	bge	5f				//   goto io_mapping
-
-	/*
-	 * vmalloc mapping gets the encoding from the PACA as the mapping
-	 * can be demoted from 64K -> 4K dynamically on some machines.
-	 */
-	lhz	r11,PACAVMALLOCSLLP(r13)
-	b	6f
-5:
-	/* IO mapping */
-.globl slb_miss_kernel_load_io
-slb_miss_kernel_load_io:
-	li	r11,0
-6:
-	/*
-	 * context = (ea >> 60) - (0xc - 1)
-	 * r9 = region id.
-	 */
-	subi	r9,r9,KERNEL_REGION_CONTEXT_OFFSET
-
-BEGIN_FTR_SECTION
-	b	.Lslb_finish_load
-END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
-	b	.Lslb_finish_load_1T
-
-0:	/*
-	 * For userspace addresses, make sure this is region 0.
-	 */
-	cmpdi	r9, 0
-	bne-	8f
-        /*
-         * user space make sure we are within the allowed limit
-	 */
-	ld	r11,PACA_SLB_ADDR_LIMIT(r13)
-	cmpld	r3,r11
-	bge-	8f
-
-	/* when using slices, we extract the psize off the slice bitmaps
-	 * and then we need to get the sllp encoding off the mmu_psize_defs
-	 * array.
-	 *
-	 * XXX This is a bit inefficient especially for the normal case,
-	 * so we should try to implement a fast path for the standard page
-	 * size using the old sllp value so we avoid the array. We cannot
-	 * really do dynamic patching unfortunately as processes might flip
-	 * between 4k and 64k standard page size
-	 */
-#ifdef CONFIG_PPC_MM_SLICES
-	/* r10 have esid */
-	cmpldi	r10,16
-	/* below SLICE_LOW_TOP */
-	blt	5f
-	/*
-	 * Handle hpsizes,
-	 * r9 is get_paca()->context.high_slices_psize[index], r11 is mask_index
-	 */
-	srdi    r11,r10,(SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT + 1) /* index */
-	addi	r9,r11,PACAHIGHSLICEPSIZE
-	lbzx	r9,r13,r9		/* r9 is hpsizes[r11] */
-	/* r11 = (r10 >> (SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT)) & 0x1 */
-	rldicl	r11,r10,(64 - (SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT)),63
-	b	6f
-
-5:
-	/*
-	 * Handle lpsizes
-	 * r9 is get_paca()->context.low_slices_psize[index], r11 is mask_index
-	 */
-	srdi    r11,r10,1 /* index */
-	addi	r9,r11,PACALOWSLICESPSIZE
-	lbzx	r9,r13,r9		/* r9 is lpsizes[r11] */
-	rldicl	r11,r10,0,63		/* r11 = r10 & 0x1 */
-6:
-	sldi	r11,r11,2  /* index * 4 */
-	/* Extract the psize and multiply to get an array offset */
-	srd	r9,r9,r11
-	andi.	r9,r9,0xf
-	mulli	r9,r9,MMUPSIZEDEFSIZE
-
-	/* Now get to the array and obtain the sllp
-	 */
-	ld	r11,PACATOC(r13)
-	ld	r11,mmu_psize_defs@got(r11)
-	add	r11,r11,r9
-	ld	r11,MMUPSIZESLLP(r11)
-	ori	r11,r11,SLB_VSID_USER
-#else
-	/* paca context sllp already contains the SLB_VSID_USER bits */
-	lhz	r11,PACACONTEXTSLLP(r13)
-#endif /* CONFIG_PPC_MM_SLICES */
-
-	ld	r9,PACACONTEXTID(r13)
-BEGIN_FTR_SECTION
-	cmpldi	r10,0x1000
-	bge	.Lslb_finish_load_1T
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
-	b	.Lslb_finish_load
-
-8:	/* invalid EA - return an error indication */
-	crset	4*cr0+eq		/* indicate failure */
-	blr
-
-/*
- * Finish loading of an SLB entry and return
- *
- * r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
- */
-.Lslb_finish_load:
-	rldimi  r10,r9,ESID_BITS,0
-	ASM_VSID_SCRAMBLE(r10,r9,r11,256M)
-	/* r3 = EA, r11 = VSID data */
-	/*
-	 * Find a slot, round robin. Previously we tried to find a
-	 * free slot first but that took too long. Unfortunately we
-	 * dont have any LRU information to help us choose a slot.
-	 */
-
-	mr	r9,r3
-
-	/* slb_finish_load_1T continues here. r9=EA with non-ESID bits clear */
-7:	ld	r10,PACASTABRR(r13)
-	addi	r10,r10,1
-	/* This gets soft patched on boot. */
-.globl slb_compare_rr_to_size
-slb_compare_rr_to_size:
-	cmpldi	r10,0
-
-	blt+	4f
-	li	r10,SLB_NUM_BOLTED
-
-4:
-	std	r10,PACASTABRR(r13)
-
-3:
-	rldimi	r9,r10,0,36		/* r9  = EA[0:35] | entry */
-	oris	r10,r9,SLB_ESID_V@h	/* r10 = r9 | SLB_ESID_V */
-
-	/* r9 = ESID data, r11 = VSID data */
-
-	/*
-	 * No need for an isync before or after this slbmte. The exception
-	 * we enter with and the rfid we exit with are context synchronizing.
-	 */
-	slbmte	r11,r10
-
-	/* we're done for kernel addresses */
-	crclr	4*cr0+eq		/* set result to "success" */
-	bgelr	cr7
-
-	/* Update the slb cache */
-	lhz	r9,PACASLBCACHEPTR(r13)	/* offset = paca->slb_cache_ptr */
-	cmpldi	r9,SLB_CACHE_ENTRIES
-	bge	1f
-
-	/* still room in the slb cache */
-	sldi	r11,r9,2		/* r11 = offset * sizeof(u32) */
-	srdi    r10,r10,28		/* get the 36 bits of the ESID */
-	add	r11,r11,r13		/* r11 = (u32 *)paca + offset */
-	stw	r10,PACASLBCACHE(r11)	/* paca->slb_cache[offset] = esid */
-	addi	r9,r9,1			/* offset++ */
-	b	2f
-1:					/* offset >= SLB_CACHE_ENTRIES */
-	li	r9,SLB_CACHE_ENTRIES+1
-2:
-	sth	r9,PACASLBCACHEPTR(r13)	/* paca->slb_cache_ptr = offset */
-	crclr	4*cr0+eq		/* set result to "success" */
-	blr
-
-/*
- * Finish loading of a 1T SLB entry (for the kernel linear mapping) and return.
- *
- * r3 = EA, r9 = context, r10 = ESID(256MB), r11 = flags, clobbers r9
- */
-.Lslb_finish_load_1T:
-	srdi	r10,r10,(SID_SHIFT_1T - SID_SHIFT)	/* get 1T ESID */
-	rldimi  r10,r9,ESID_BITS_1T,0
-	ASM_VSID_SCRAMBLE(r10,r9,r11,1T)
-
-	li	r10,MMU_SEGSIZE_1T
-	rldimi	r11,r10,SLB_VSID_SSIZE_SHIFT,0	/* insert segment size */
-
-	/* r3 = EA, r11 = VSID data */
-	clrrdi	r9,r3,SID_SHIFT_1T	/* clear out non-ESID bits */
-	b	7b
-
-
-_ASM_NOKPROBE_SYMBOL(slb_allocate)
-_ASM_NOKPROBE_SYMBOL(slb_miss_kernel_load_linear)
-_ASM_NOKPROBE_SYMBOL(slb_miss_kernel_load_io)
-_ASM_NOKPROBE_SYMBOL(slb_compare_rr_to_size)
-#ifdef CONFIG_SPARSEMEM_VMEMMAP
-_ASM_NOKPROBE_SYMBOL(slb_miss_kernel_load_vmemmap)
-#endif