Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "S390:

   - ultravisor communication device driver

   - fix TEID on terminating storage key ops

  RISC-V:

   - Added Sv57x4 support for G-stage page table

   - Added range based local HFENCE functions

   - Added remote HFENCE functions based on VCPU requests

   - Added ISA extension registers in ONE_REG interface

   - Updated KVM RISC-V maintainers entry to cover selftests support

  ARM:

   - Add support for the ARMv8.6 WFxT extension

   - Guard pages for the EL2 stacks

   - Trap and emulate AArch32 ID registers to hide unsupported features

   - Ability to select and save/restore the set of hypercalls exposed to
     the guest

   - Support for PSCI-initiated suspend in collaboration with userspace

   - GICv3 register-based LPI invalidation support

   - Move host PMU event merging into the vcpu data structure

   - GICv3 ITS save/restore fixes

   - The usual set of small-scale cleanups and fixes

  x86:

   - New ioctls to get/set TSC frequency for a whole VM

   - Allow userspace to opt out of hypercall patching

   - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr

  AMD SEV improvements:

   - Add KVM_EXIT_SHUTDOWN metadata for SEV-ES

   - V_TSC_AUX support

  Nested virtualization improvements for AMD:

   - Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
     nested vGIF)

   - Allow AVIC to co-exist with a nested guest running

   - Fixes for LBR virtualizations when a nested guest is running, and
     nested LBR virtualization support

   - PAUSE filtering for nested hypervisors

  Guest support:

   - Decoupling of vcpu_is_preempted from PV spinlocks"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
  KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
  KVM: selftests: x86: Sync the new name of the test case to .gitignore
  Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
  x86, kvm: use correct GFP flags for preemption disabled
  KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
  x86/kvm: Alloc dummy async #PF token outside of raw spinlock
  KVM: x86: avoid calling x86 emulator without a decoded instruction
  KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
  x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
  s390/uv_uapi: depend on CONFIG_S390
  KVM: selftests: x86: Fix test failure on arch lbr capable platforms
  KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
  KVM: s390: selftest: Test suppression indication on key prot exception
  KVM: s390: Don't indicate suppression on dirtying, failing memop
  selftests: drivers/s390x: Add uvdevice tests
  drivers/s390/char: Add Ultravisor io device
  MAINTAINERS: Update KVM RISC-V entry to cover selftests support
  RISC-V: KVM: Introduce ISA extension register
  RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
  RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
  ...

5 files changed, 379 insertions, 94 deletions

diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index c8e2e9cd84dcf4..11e00a46c610f9 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -982,12 +982,22 @@ memory.
 	__u8 pad2[30];
   };
 
-If the KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL flag is returned from the
-KVM_CAP_XEN_HVM check, it may be set in the flags field of this ioctl.
-This requests KVM to generate the contents of the hypercall page
-automatically; hypercalls will be intercepted and passed to userspace
-through KVM_EXIT_XEN.  In this case, all of the blob size and address
-fields must be zero.
+If certain flags are returned from the KVM_CAP_XEN_HVM check, they may
+be set in the flags field of this ioctl:
+
+The KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL flag requests KVM to generate
+the contents of the hypercall page automatically; hypercalls will be
+intercepted and passed to userspace through KVM_EXIT_XEN.  In this
+ase, all of the blob size and address fields must be zero.
+
+The KVM_XEN_HVM_CONFIG_EVTCHN_SEND flag indicates to KVM that userspace
+will always use the KVM_XEN_HVM_EVTCHN_SEND ioctl to deliver event
+channel interrupts rather than manipulating the guest's shared_info
+structures directly. This, in turn, may allow KVM to enable features
+such as intercepting the SCHEDOP_poll hypercall to accelerate PV
+spinlock operation for the guest. Userspace may still use the ioctl
+to deliver events if it was advertised, even if userspace does not
+send this indication that it will always do so
 
 No other flags are currently valid in the struct kvm_xen_hvm_config.
 
@@ -1476,14 +1486,43 @@ Possible values are:
                                  [s390]
    KVM_MP_STATE_LOAD             the vcpu is in a special load/startup state
                                  [s390]
+   KVM_MP_STATE_SUSPENDED        the vcpu is in a suspend state and is waiting
+                                 for a wakeup event [arm64]
    ==========================    ===============================================
 
 On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
 in-kernel irqchip, the multiprocessing state must be maintained by userspace on
 these architectures.
 
-For arm64/riscv:
-^^^^^^^^^^^^^^^^
+For arm64:
+^^^^^^^^^^
+
+If a vCPU is in the KVM_MP_STATE_SUSPENDED state, KVM will emulate the
+architectural execution of a WFI instruction.
+
+If a wakeup event is recognized, KVM will exit to userspace with a
+KVM_SYSTEM_EVENT exit, where the event type is KVM_SYSTEM_EVENT_WAKEUP. If
+userspace wants to honor the wakeup, it must set the vCPU's MP state to
+KVM_MP_STATE_RUNNABLE. If it does not, KVM will continue to await a wakeup
+event in subsequent calls to KVM_RUN.
+
+.. warning::
+
+     If userspace intends to keep the vCPU in a SUSPENDED state, it is
+     strongly recommended that userspace take action to suppress the
+     wakeup event (such as masking an interrupt). Otherwise, subsequent
+     calls to KVM_RUN will immediately exit with a KVM_SYSTEM_EVENT_WAKEUP
+     event and inadvertently waste CPU cycles.
+
+     Additionally, if userspace takes action to suppress a wakeup event,
+     it is strongly recommended that it also restores the vCPU to its
+     original state when the vCPU is made RUNNABLE again. For example,
+     if userspace masked a pending interrupt to suppress the wakeup,
+     the interrupt should be unmasked before returning control to the
+     guest.
+
+For riscv:
+^^^^^^^^^^
 
 The only states that are valid are KVM_MP_STATE_STOPPED and
 KVM_MP_STATE_RUNNABLE which reflect if the vcpu is paused or not.
@@ -1887,22 +1926,25 @@ the future.
 4.55 KVM_SET_TSC_KHZ
 --------------------
 
-:Capability: KVM_CAP_TSC_CONTROL
+:Capability: KVM_CAP_TSC_CONTROL / KVM_CAP_VM_TSC_CONTROL
 :Architectures: x86
-:Type: vcpu ioctl
+:Type: vcpu ioctl / vm ioctl
 :Parameters: virtual tsc_khz
 :Returns: 0 on success, -1 on error
 
 Specifies the tsc frequency for the virtual machine. The unit of the
 frequency is KHz.
 
+If the KVM_CAP_VM_TSC_CONTROL capability is advertised, this can also
+be used as a vm ioctl to set the initial tsc frequency of subsequently
+created vCPUs.
 
 4.56 KVM_GET_TSC_KHZ
 --------------------
 
-:Capability: KVM_CAP_GET_TSC_KHZ
+:Capability: KVM_CAP_GET_TSC_KHZ / KVM_CAP_VM_TSC_CONTROL
 :Architectures: x86
-:Type: vcpu ioctl
+:Type: vcpu ioctl / vm ioctl
 :Parameters: none
 :Returns: virtual tsc-khz on success, negative value on error
 
@@ -2601,6 +2643,24 @@ EINVAL.
 After the vcpu's SVE configuration is finalized, further attempts to
 write this register will fail with EPERM.
 
+arm64 bitmap feature firmware pseudo-registers have the following bit pattern::
+
+  0x6030 0000 0016 <regno:16>
+
+The bitmap feature firmware registers exposes the hypercall services that
+are available for userspace to configure. The set bits corresponds to the
+services that are available for the guests to access. By default, KVM
+sets all the supported bits during VM initialization. The userspace can
+discover the available services via KVM_GET_ONE_REG, and write back the
+bitmap corresponding to the features that it wishes guests to see via
+KVM_SET_ONE_REG.
+
+Note: These registers are immutable once any of the vCPUs of the VM has
+run at least once. A KVM_SET_ONE_REG in such a scenario will return
+a -EBUSY to userspace.
+
+(See Documentation/virt/kvm/arm/hypercalls.rst for more details.)
+
 
 MIPS registers are mapped using the lower 32 bits.  The upper 16 of that is
 the register group type:
@@ -3754,12 +3814,18 @@ in case of KVM_S390_MEMOP_F_CHECK_ONLY), the ioctl returns a positive
 error number indicating the type of exception. This exception is also
 raised directly at the corresponding VCPU if the flag
 KVM_S390_MEMOP_F_INJECT_EXCEPTION is set.
+On protection exceptions, unless specified otherwise, the injected
+translation-exception identifier (TEID) indicates suppression.
 
 If the KVM_S390_MEMOP_F_SKEY_PROTECTION flag is set, storage key
 protection is also in effect and may cause exceptions if accesses are
 prohibited given the access key designated by "key"; the valid range is 0..15.
 KVM_S390_MEMOP_F_SKEY_PROTECTION is available if KVM_CAP_S390_MEM_OP_EXTENSION
 is > 0.
+Since the accessed memory may span multiple pages and those pages might have
+different storage keys, it is possible that a protection exception occurs
+after memory has been modified. In this case, if the exception is injected,
+the TEID does not indicate suppression.
 
 Absolute read/write:
 ^^^^^^^^^^^^^^^^^^^^
@@ -5216,7 +5282,25 @@ have deterministic behavior.
 		struct {
 			__u64 gfn;
 		} shared_info;
-		__u64 pad[4];
+		struct {
+			__u32 send_port;
+			__u32 type; /* EVTCHNSTAT_ipi / EVTCHNSTAT_interdomain */
+			__u32 flags;
+			union {
+				struct {
+					__u32 port;
+					__u32 vcpu;
+					__u32 priority;
+				} port;
+				struct {
+					__u32 port; /* Zero for eventfd */
+					__s32 fd;
+				} eventfd;
+				__u32 padding[4];
+			} deliver;
+		} evtchn;
+		__u32 xen_version;
+		__u64 pad[8];
 	} u;
   };
 
@@ -5247,6 +5331,30 @@ KVM_XEN_ATTR_TYPE_SHARED_INFO
 
 KVM_XEN_ATTR_TYPE_UPCALL_VECTOR
   Sets the exception vector used to deliver Xen event channel upcalls.
+  This is the HVM-wide vector injected directly by the hypervisor
+  (not through the local APIC), typically configured by a guest via
+  HVM_PARAM_CALLBACK_IRQ.
+
+KVM_XEN_ATTR_TYPE_EVTCHN
+  This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates
+  support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It configures
+  an outbound port number for interception of EVTCHNOP_send requests
+  from the guest. A given sending port number may be directed back
+  to a specified vCPU (by APIC ID) / port / priority on the guest,
+  or to trigger events on an eventfd. The vCPU and priority can be
+  changed by setting KVM_XEN_EVTCHN_UPDATE in a subsequent call,
+  but other fields cannot change for a given sending port. A port
+  mapping is removed by using KVM_XEN_EVTCHN_DEASSIGN in the flags
+  field.
+
+KVM_XEN_ATTR_TYPE_XEN_VERSION
+  This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates
+  support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It configures
+  the 32-bit version code returned to the guest when it invokes the
+  XENVER_version call; typically (XEN_MAJOR << 16 | XEN_MINOR). PV
+  Xen guests will often use this to as a dummy hypercall to trigger
+  event channel delivery, so responding within the kernel without
+  exiting to userspace is beneficial.
 
 4.127 KVM_XEN_HVM_GET_ATTR
 --------------------------
@@ -5258,7 +5366,8 @@ KVM_XEN_ATTR_TYPE_UPCALL_VECTOR
 :Returns: 0 on success, < 0 on error
 
 Allows Xen VM attributes to be read. For the structure and types,
-see KVM_XEN_HVM_SET_ATTR above.
+see KVM_XEN_HVM_SET_ATTR above. The KVM_XEN_ATTR_TYPE_EVTCHN
+attribute cannot be read.
 
 4.128 KVM_XEN_VCPU_SET_ATTR
 ---------------------------
@@ -5285,6 +5394,13 @@ see KVM_XEN_HVM_SET_ATTR above.
 			__u64 time_blocked;
 			__u64 time_offline;
 		} runstate;
+		__u32 vcpu_id;
+		struct {
+			__u32 port;
+			__u32 priority;
+			__u64 expires_ns;
+		} timer;
+		__u8 vector;
 	} u;
   };
 
@@ -5326,6 +5442,27 @@ KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST
   or RUNSTATE_offline) to set the current accounted state as of the
   adjusted state_entry_time.
 
+KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID
+  This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates
+  support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It sets the Xen
+  vCPU ID of the given vCPU, to allow timer-related VCPU operations to
+  be intercepted by KVM.
+
+KVM_XEN_VCPU_ATTR_TYPE_TIMER
+  This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates
+  support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It sets the
+  event channel port/priority for the VIRQ_TIMER of the vCPU, as well
+  as allowing a pending timer to be saved/restored.
+
+KVM_XEN_VCPU_ATTR_TYPE_UPCALL_VECTOR
+  This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates
+  support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It sets the
+  per-vCPU local APIC upcall vector, configured by a Xen guest with
+  the HVMOP_set_evtchn_upcall_vector hypercall. This is typically
+  used by Windows guests, and is distinct from the HVM-wide upcall
+  vector configured with HVM_PARAM_CALLBACK_IRQ.
+
+
 4.129 KVM_XEN_VCPU_GET_ATTR
 ---------------------------
 
@@ -5645,6 +5782,25 @@ enabled with ``arch_prctl()``, but this may change in the future.
 The offsets of the state save areas in struct kvm_xsave follow the contents
 of CPUID leaf 0xD on the host.
 
+4.135 KVM_XEN_HVM_EVTCHN_SEND
+-----------------------------
+
+:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND
+:Architectures: x86
+:Type: vm ioctl
+:Parameters: struct kvm_irq_routing_xen_evtchn
+:Returns: 0 on success, < 0 on error
+
+
+::
+
+   struct kvm_irq_routing_xen_evtchn {
+	__u32 port;
+	__u32 vcpu;
+	__u32 priority;
+   };
+
+This ioctl injects an event channel interrupt directly to the guest vCPU.
 
 5. The kvm_run structure
 ========================
@@ -5987,6 +6143,9 @@ should put the acknowledged interrupt vector into the 'epr' field.
   #define KVM_SYSTEM_EVENT_SHUTDOWN       1
   #define KVM_SYSTEM_EVENT_RESET          2
   #define KVM_SYSTEM_EVENT_CRASH          3
+  #define KVM_SYSTEM_EVENT_WAKEUP         4
+  #define KVM_SYSTEM_EVENT_SUSPEND        5
+  #define KVM_SYSTEM_EVENT_SEV_TERM       6
 			__u32 type;
                         __u32 ndata;
                         __u64 data[16];
@@ -6011,6 +6170,13 @@ Valid values for 'type' are:
    has requested a crash condition maintenance. Userspace can choose
    to ignore the request, or to gather VM memory core dump and/or
    reset/shutdown of the VM.
+ - KVM_SYSTEM_EVENT_SEV_TERM -- an AMD SEV guest requested termination.
+   The guest physical address of the guest's GHCB is stored in `data[0]`.
+ - KVM_SYSTEM_EVENT_WAKEUP -- the exiting vCPU is in a suspended state and
+   KVM has recognized a wakeup event. Userspace may honor this event by
+   marking the exiting vCPU as runnable, or deny it and call KVM_RUN again.
+ - KVM_SYSTEM_EVENT_SUSPEND -- the guest has requested a suspension of
+   the VM.
 
 If KVM_CAP_SYSTEM_EVENT_DATA is present, the 'data' field can contain
 architecture specific information for the system-level event.  Only
@@ -6027,6 +6193,32 @@ Previous versions of Linux defined a `flags` member in this struct.  The
 field is now aliased to `data[0]`.  Userspace can assume that it is only
 written if ndata is greater than 0.
 
+For arm/arm64:
+--------------
+
+KVM_SYSTEM_EVENT_SUSPEND exits are enabled with the
+KVM_CAP_ARM_SYSTEM_SUSPEND VM capability. If a guest invokes the PSCI
+SYSTEM_SUSPEND function, KVM will exit to userspace with this event
+type.
+
+It is the sole responsibility of userspace to implement the PSCI
+SYSTEM_SUSPEND call according to ARM DEN0022D.b 5.19 "SYSTEM_SUSPEND".
+KVM does not change the vCPU's state before exiting to userspace, so
+the call parameters are left in-place in the vCPU registers.
+
+Userspace is _required_ to take action for such an exit. It must
+either:
+
+ - Honor the guest request to suspend the VM. Userspace can request
+   in-kernel emulation of suspension by setting the calling vCPU's
+   state to KVM_MP_STATE_SUSPENDED. Userspace must configure the vCPU's
+   state according to the parameters passed to the PSCI function when
+   the calling vCPU is resumed. See ARM DEN0022D.b 5.19.1 "Intended use"
+   for details on the function parameters.
+
+ - Deny the guest request to suspend the VM. See ARM DEN0022D.b 5.19.2
+   "Caller responsibilities" for possible return values.
+
 ::
 
 		/* KVM_EXIT_IOAPIC_EOI */
@@ -7147,6 +7339,15 @@ The valid bits in cap.args[0] are:
                                     Additionally, when this quirk is disabled,
                                     KVM clears CPUID.01H:ECX[bit 3] if
                                     IA32_MISC_ENABLE[bit 18] is cleared.
+
+ KVM_X86_QUIRK_FIX_HYPERCALL_INSN   By default, KVM rewrites guest
+                                    VMMCALL/VMCALL instructions to match the
+                                    vendor's hypercall instruction for the
+                                    system. When this quirk is disabled, KVM
+                                    will no longer rewrite invalid guest
+                                    hypercall instructions. Executing the
+                                    incorrect hypercall instruction will
+                                    generate a #UD within the guest.
 =================================== ============================================
 
 8. Other capabilities.
@@ -7624,8 +7825,9 @@ PVHVM guests. Valid flags are::
   #define KVM_XEN_HVM_CONFIG_HYPERCALL_MSR	(1 << 0)
   #define KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL	(1 << 1)
   #define KVM_XEN_HVM_CONFIG_SHARED_INFO	(1 << 2)
-  #define KVM_XEN_HVM_CONFIG_RUNSTATE		(1 << 2)
-  #define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL	(1 << 3)
+  #define KVM_XEN_HVM_CONFIG_RUNSTATE		(1 << 3)
+  #define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL	(1 << 4)
+  #define KVM_XEN_HVM_CONFIG_EVTCHN_SEND	(1 << 5)
 
 The KVM_XEN_HVM_CONFIG_HYPERCALL_MSR flag indicates that the KVM_XEN_HVM_CONFIG
 ioctl is available, for the guest to set its hypercall page.
@@ -7649,6 +7851,14 @@ The KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL flag indicates that IRQ routing entries
 of the type KVM_IRQ_ROUTING_XEN_EVTCHN are supported, with the priority
 field set to indicate 2 level event channel delivery.
 
+The KVM_XEN_HVM_CONFIG_EVTCHN_SEND flag indicates that KVM supports
+injecting event channel events directly into the guest with the
+KVM_XEN_HVM_EVTCHN_SEND ioctl. It also indicates support for the
+KVM_XEN_ATTR_TYPE_EVTCHN/XEN_VERSION HVM attributes and the
+KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID/TIMER/UPCALL_VECTOR vCPU attributes.
+related to event channel delivery, timers, and the XENVER_version
+interception.
+
 8.31 KVM_CAP_PPC_MULTITCE
 -------------------------
 
@@ -7736,6 +7946,16 @@ At this time, KVM_PMU_CAP_DISABLE is the only capability.  Setting
 this capability will disable PMU virtualization for that VM.  Usermode
 should adjust CPUID leaf 0xA to reflect that the PMU is disabled.
 
+8.36 KVM_CAP_ARM_SYSTEM_SUSPEND
+-------------------------------
+
+:Capability: KVM_CAP_ARM_SYSTEM_SUSPEND
+:Architectures: arm64
+:Type: vm
+
+When enabled, KVM will exit to userspace with KVM_EXIT_SYSTEM_EVENT of
+type KVM_SYSTEM_EVENT_SUSPEND to process the guest suspend request.
+
 9. Known KVM API problems
 =========================
 
diff --git a/Documentation/virt/kvm/arm/hypercalls.rst b/Documentation/virt/kvm/arm/hypercalls.rst
new file mode 100644
index 00000000000000..3e23084644ba2a
--- /dev/null
+++ b/Documentation/virt/kvm/arm/hypercalls.rst
@@ -0,0 +1,138 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+ARM Hypercall Interface
+=======================
+
+KVM handles the hypercall services as requested by the guests. New hypercall
+services are regularly made available by the ARM specification or by KVM (as
+vendor services) if they make sense from a virtualization point of view.
+
+This means that a guest booted on two different versions of KVM can observe
+two different "firmware" revisions. This could cause issues if a given guest
+is tied to a particular version of a hypercall service, or if a migration
+causes a different version to be exposed out of the blue to an unsuspecting
+guest.
+
+In order to remedy this situation, KVM exposes a set of "firmware
+pseudo-registers" that can be manipulated using the GET/SET_ONE_REG
+interface. These registers can be saved/restored by userspace, and set
+to a convenient value as required.
+
+The following registers are defined:
+
+* KVM_REG_ARM_PSCI_VERSION:
+
+  KVM implements the PSCI (Power State Coordination Interface)
+  specification in order to provide services such as CPU on/off, reset
+  and power-off to the guest.
+
+  - Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set
+    (and thus has already been initialized)
+  - Returns the current PSCI version on GET_ONE_REG (defaulting to the
+    highest PSCI version implemented by KVM and compatible with v0.2)
+  - Allows any PSCI version implemented by KVM and compatible with
+    v0.2 to be set with SET_ONE_REG
+  - Affects the whole VM (even if the register view is per-vcpu)
+
+* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1:
+    Holds the state of the firmware support to mitigate CVE-2017-5715, as
+    offered by KVM to the guest via a HVC call. The workaround is described
+    under SMCCC_ARCH_WORKAROUND_1 in [1].
+
+  Accepted values are:
+
+    KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL:
+      KVM does not offer
+      firmware support for the workaround. The mitigation status for the
+      guest is unknown.
+    KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL:
+      The workaround HVC call is
+      available to the guest and required for the mitigation.
+    KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED:
+      The workaround HVC call
+      is available to the guest, but it is not needed on this VCPU.
+
+* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2:
+    Holds the state of the firmware support to mitigate CVE-2018-3639, as
+    offered by KVM to the guest via a HVC call. The workaround is described
+    under SMCCC_ARCH_WORKAROUND_2 in [1]_.
+
+  Accepted values are:
+
+    KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL:
+      A workaround is not
+      available. KVM does not offer firmware support for the workaround.
+    KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN:
+      The workaround state is
+      unknown. KVM does not offer firmware support for the workaround.
+    KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL:
+      The workaround is available,
+      and can be disabled by a vCPU. If
+      KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED is set, it is active for
+      this vCPU.
+    KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED:
+      The workaround is always active on this vCPU or it is not needed.
+
+
+Bitmap Feature Firmware Registers
+---------------------------------
+
+Contrary to the above registers, the following registers exposes the
+hypercall services in the form of a feature-bitmap to the userspace. This
+bitmap is translated to the services that are available to the guest.
+There is a register defined per service call owner and can be accessed via
+GET/SET_ONE_REG interface.
+
+By default, these registers are set with the upper limit of the features
+that are supported. This way userspace can discover all the usable
+hypercall services via GET_ONE_REG. The user-space can write-back the
+desired bitmap back via SET_ONE_REG. The features for the registers that
+are untouched, probably because userspace isn't aware of them, will be
+exposed as is to the guest.
+
+Note that KVM will not allow the userspace to configure the registers
+anymore once any of the vCPUs has run at least once. Instead, it will
+return a -EBUSY.
+
+The pseudo-firmware bitmap register are as follows:
+
+* KVM_REG_ARM_STD_BMAP:
+    Controls the bitmap of the ARM Standard Secure Service Calls.
+
+  The following bits are accepted:
+
+    Bit-0: KVM_REG_ARM_STD_BIT_TRNG_V1_0:
+      The bit represents the services offered under v1.0 of ARM True Random
+      Number Generator (TRNG) specification, ARM DEN0098.
+
+* KVM_REG_ARM_STD_HYP_BMAP:
+    Controls the bitmap of the ARM Standard Hypervisor Service Calls.
+
+  The following bits are accepted:
+
+    Bit-0: KVM_REG_ARM_STD_HYP_BIT_PV_TIME:
+      The bit represents the Paravirtualized Time service as represented by
+      ARM DEN0057A.
+
+* KVM_REG_ARM_VENDOR_HYP_BMAP:
+    Controls the bitmap of the Vendor specific Hypervisor Service Calls.
+
+  The following bits are accepted:
+
+    Bit-0: KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT
+      The bit represents the ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID
+      and ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID function-ids.
+
+    Bit-1: KVM_REG_ARM_VENDOR_HYP_BIT_PTP:
+      The bit represents the Precision Time Protocol KVM service.
+
+Errors:
+
+    =======  =============================================================
+    -ENOENT   Unknown register accessed.
+    -EBUSY    Attempt a 'write' to the register after the VM has started.
+    -EINVAL   Invalid bitmap written to the register.
+    =======  =============================================================
+
+.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf
diff --git a/Documentation/virt/kvm/arm/index.rst b/Documentation/virt/kvm/arm/index.rst
index 78a9b670aafee6..e8484843215808 100644
--- a/Documentation/virt/kvm/arm/index.rst
+++ b/Documentation/virt/kvm/arm/index.rst
@@ -8,6 +8,6 @@ ARM
    :maxdepth: 2
 
    hyp-abi
-   psci
+   hypercalls
    pvtime
    ptp_kvm
diff --git a/Documentation/virt/kvm/arm/psci.rst b/Documentation/virt/kvm/arm/psci.rst
deleted file mode 100644
index d52c2e83b5b8d1..00000000000000
--- a/Documentation/virt/kvm/arm/psci.rst
+++ /dev/null
@@ -1,77 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-=========================================
-Power State Coordination Interface (PSCI)
-=========================================
-
-KVM implements the PSCI (Power State Coordination Interface)
-specification in order to provide services such as CPU on/off, reset
-and power-off to the guest.
-
-The PSCI specification is regularly updated to provide new features,
-and KVM implements these updates if they make sense from a virtualization
-point of view.
-
-This means that a guest booted on two different versions of KVM can
-observe two different "firmware" revisions. This could cause issues if
-a given guest is tied to a particular PSCI revision (unlikely), or if
-a migration causes a different PSCI version to be exposed out of the
-blue to an unsuspecting guest.
-
-In order to remedy this situation, KVM exposes a set of "firmware
-pseudo-registers" that can be manipulated using the GET/SET_ONE_REG
-interface. These registers can be saved/restored by userspace, and set
-to a convenient value if required.
-
-The following register is defined:
-
-* KVM_REG_ARM_PSCI_VERSION:
-
-  - Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set
-    (and thus has already been initialized)
-  - Returns the current PSCI version on GET_ONE_REG (defaulting to the
-    highest PSCI version implemented by KVM and compatible with v0.2)
-  - Allows any PSCI version implemented by KVM and compatible with
-    v0.2 to be set with SET_ONE_REG
-  - Affects the whole VM (even if the register view is per-vcpu)
-
-* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1:
-    Holds the state of the firmware support to mitigate CVE-2017-5715, as
-    offered by KVM to the guest via a HVC call. The workaround is described
-    under SMCCC_ARCH_WORKAROUND_1 in [1].
-
-  Accepted values are:
-
-    KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL:
-      KVM does not offer
-      firmware support for the workaround. The mitigation status for the
-      guest is unknown.
-    KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL:
-      The workaround HVC call is
-      available to the guest and required for the mitigation.
-    KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED:
-      The workaround HVC call
-      is available to the guest, but it is not needed on this VCPU.
-
-* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2:
-    Holds the state of the firmware support to mitigate CVE-2018-3639, as
-    offered by KVM to the guest via a HVC call. The workaround is described
-    under SMCCC_ARCH_WORKAROUND_2 in [1]_.
-
-  Accepted values are:
-
-    KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL:
-      A workaround is not
-      available. KVM does not offer firmware support for the workaround.
-    KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN:
-      The workaround state is
-      unknown. KVM does not offer firmware support for the workaround.
-    KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL:
-      The workaround is available,
-      and can be disabled by a vCPU. If
-      KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED is set, it is active for
-      this vCPU.
-    KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED:
-      The workaround is always active on this vCPU or it is not needed.
-
-.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf
diff --git a/Documentation/virt/kvm/x86/mmu.rst b/Documentation/virt/kvm/x86/mmu.rst
index 5b1ebad24c77fa..8739120f430060 100644
--- a/Documentation/virt/kvm/x86/mmu.rst
+++ b/Documentation/virt/kvm/x86/mmu.rst
@@ -202,6 +202,10 @@ Shadow pages contain the following information:
     Is 1 if the MMU instance cannot use A/D bits.  EPT did not have A/D
     bits before Haswell; shadow EPT page tables also cannot use A/D bits
     if the L1 hypervisor does not enable them.
+  role.passthrough:
+    The page is not backed by a guest page table, but its first entry
+    points to one.  This is set if NPT uses 5-level page tables (host
+    CR4.LA57=1) and is shadowing L1's 4-level NPT (L1 CR4.LA57=1).
   gfn:
     Either the guest page table containing the translations shadowed by this
     page, or the base page frame for linear translations.  See role.direct.