docs-rst: create an user's manual book

Place README, REPORTING-BUGS, SecurityBugs and kernel-parameters
on an user's manual book.

As we'll be numbering the user's manual, remove the manual
numbering from SecurityBugs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

1 files changed, 0 insertions, 115 deletions

diff --git a/Documentation/serial-console.txt b/Documentation/serial-console.txt
deleted file mode 100644
index a8d1e36b627a11..00000000000000
--- a/Documentation/serial-console.txt
+++ /dev/null
@@ -1,115 +0,0 @@
-.. _serial_console:
-
-Linux Serial Console
-====================
-
-To use a serial port as console you need to compile the support into your
-kernel - by default it is not compiled in. For PC style serial ports
-it's the config option next to menu option:
-
-:menuselection:`Character devices --> Serial drivers --> 8250/16550 and compatible serial support --> Console on 8250/16550 and compatible serial port`
-
-You must compile serial support into the kernel and not as a module.
-
-It is possible to specify multiple devices for console output. You can
-define a new kernel command line option to select which device(s) to
-use for console output.
-
-The format of this option is::
-
-	console=device,options
-
-	device:		tty0 for the foreground virtual console
-			ttyX for any other virtual console
-			ttySx for a serial port
-			lp0 for the first parallel port
-			ttyUSB0 for the first USB serial device
-
-	options:	depend on the driver. For the serial port this
-			defines the baudrate/parity/bits/flow control of
-			the port, in the format BBBBPNF, where BBBB is the
-			speed, P is parity (n/o/e), N is number of bits,
-			and F is flow control ('r' for RTS). Default is
-			9600n8. The maximum baudrate is 115200.
-
-You can specify multiple console= options on the kernel command line.
-Output will appear on all of them. The last device will be used when
-you open ``/dev/console``. So, for example::
-
-	console=ttyS1,9600 console=tty0
-
-defines that opening ``/dev/console`` will get you the current foreground
-virtual console, and kernel messages will appear on both the VGA
-console and the 2nd serial port (ttyS1 or COM2) at 9600 baud.
-
-Note that you can only define one console per device type (serial, video).
-
-If no console device is specified, the first device found capable of
-acting as a system console will be used. At this time, the system
-first looks for a VGA card and then for a serial port. So if you don't
-have a VGA card in your system the first serial port will automatically
-become the console.
-
-You will need to create a new device to use ``/dev/console``. The official
-``/dev/console`` is now character device 5,1.
-
-(You can also use a network device as a console.  See
-``Documentation/networking/netconsole.txt`` for information on that.)
-
-Here's an example that will use ``/dev/ttyS1`` (COM2) as the console.
-Replace the sample values as needed.
-
-1. Create ``/dev/console`` (real console) and ``/dev/tty0`` (master virtual
-   console)::
-
-     cd /dev
-     rm -f console tty0
-     mknod -m 622 console c 5 1
-     mknod -m 622 tty0 c 4 0
-
-2. LILO can also take input from a serial device. This is a very
-   useful option. To tell LILO to use the serial port:
-   In lilo.conf (global section)::
-
-     serial  = 1,9600n8 (ttyS1, 9600 bd, no parity, 8 bits)
-
-3. Adjust to kernel flags for the new kernel,
-   again in lilo.conf (kernel section)::
-
-     append = "console=ttyS1,9600"
-
-4. Make sure a getty runs on the serial port so that you can login to
-   it once the system is done booting. This is done by adding a line
-   like this to ``/etc/inittab`` (exact syntax depends on your getty)::
-
-     S1:23:respawn:/sbin/getty -L ttyS1 9600 vt100
-
-5. Init and ``/etc/ioctl.save``
-
-   Sysvinit remembers its stty settings in a file in ``/etc``, called
-   ``/etc/ioctl.save``. REMOVE THIS FILE before using the serial
-   console for the first time, because otherwise init will probably
-   set the baudrate to 38400 (baudrate of the virtual console).
-
-6. ``/dev/console`` and X
-   Programs that want to do something with the virtual console usually
-   open ``/dev/console``. If you have created the new ``/dev/console`` device,
-   and your console is NOT the virtual console some programs will fail.
-   Those are programs that want to access the VT interface, and use
-   ``/dev/console instead of /dev/tty0``. Some of those programs are::
-
-     Xfree86, svgalib, gpm, SVGATextMode
-
-   It should be fixed in modern versions of these programs though.
-
-   Note that if you boot without a ``console=`` option (or with
-   ``console=/dev/tty0``), ``/dev/console`` is the same as ``/dev/tty0``.
-   In that case everything will still work.
-
-7. Thanks
-
-   Thanks to Geert Uytterhoeven <geert@linux-m68k.org>
-   for porting the patches from 2.1.4x to 2.1.6x for taking care of
-   the integration of these patches into m68k, ppc and alpha.
-
-Miquel van Smoorenburg <miquels@cistron.nl>, 11-Jun-2000