crypto: iaa - Fix some errors in IAA documentation

This cleans up the following issues I ran into when trying to use the
scripts and commands in the iaa-crypto.rst document.

- Fix incorrect arguments being passed to accel-config
  config-wq.
    - Replace --device_name with --driver-name.
    - Replace --driver_name with --driver-name.
    - Replace --size with --wq-size.
    - Add missing --priority argument.
- Add missing accel-config config-engine command after the
  config-wq commands.
- Fix wq name passed to accel-config config-wq.
- Add rmmod/modprobe of iaa_crypto to script that disables,
  then enables all devices and workqueues to avoid enable-wq
  failing with -EEXIST when trying to register to compression
  algorithm.
- Fix device name in cases where iaa was used instead of iax.

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

1 files changed, 16 insertions, 6 deletions

diff --git a/Documentation/driver-api/crypto/iaa/iaa-crypto.rst b/Documentation/driver-api/crypto/iaa/iaa-crypto.rst
index 7b28aef39ba00d..f4fba897d93182 100644
--- a/Documentation/driver-api/crypto/iaa/iaa-crypto.rst
+++ b/Documentation/driver-api/crypto/iaa/iaa-crypto.rst
@@ -179,7 +179,9 @@ has the old 'iax' device naming in place) ::
 
   # configure wq1.0
 
-  accel-config config-wq --group-id=0 --mode=dedicated --type=kernel --name="iaa_crypto" --device_name="crypto" iax1/wq1.0
+  accel-config config-wq --group-id=0 --mode=dedicated --type=kernel --priority=10 --name="iaa_crypto" --driver-name="crypto" iax1/wq1.0
+
+  accel-config config-engine iax1/engine1.0 --group-id=0
 
   # enable IAA device iax1
 
@@ -548,12 +550,20 @@ The below script automatically does that::
 
   echo "End Disable IAA"
 
+  echo "Reload iaa_crypto module"
+
+  rmmod iaa_crypto
+  modprobe iaa_crypto
+
+  echo "End Reload iaa_crypto module"
+
   #
   # configure iaa wqs and devices
   #
   echo "Configure IAA"
   for ((i = 1; i < ${num_iaa} * 2; i += 2)); do
-      accel-config config-wq --group-id=0 --mode=dedicated --size=128 --priority=10 --type=kernel --name="iaa_crypto" --driver_name="crypto" iax${i}/wq${i}
+      accel-config config-wq --group-id=0 --mode=dedicated --wq-size=128 --priority=10 --type=kernel --name="iaa_crypto" --driver-name="crypto" iax${i}/wq${i}.0
+      accel-config config-engine iax${i}/engine${i}.0 --group-id=0
   done
 
   echo "End Configure IAA"
@@ -564,10 +574,10 @@ The below script automatically does that::
   echo "Enable IAA"
 
   for ((i = 1; i < ${num_iaa} * 2; i += 2)); do
-      echo enable iaa iaa${i}
-      accel-config enable-device iaa${i}
-      echo enable wq iaa${i}/wq${i}.0
-      accel-config enable-wq iaa${i}/wq${i}.0
+      echo enable iaa iax${i}
+      accel-config enable-device iax${i}
+      echo enable wq iax${i}/wq${i}.0
+      accel-config enable-wq iax${i}/wq${i}.0
   done
 
   echo "End Enable IAA"