Merge tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
 "As usual, these are updates for drivers that are specific to certain
  SoCs or firmware running on them.

  Notable updates include

   - The new STMicroelectronics STM32 "firewall" bus driver that is used
     to provide a barrier between different parts of an SoC

   - Lots of updates for the Qualcomm platform drivers, in particular
     SCM, which gets a rewrite of its initialization code

   - Firmware driver updates for Arm FF-A notification interrupts and
     indirect messaging, SCMI firmware support for pin control and
     vendor specific interfaces, and TEE firmware interface changes
     across multiple TEE drivers

   - A larger cleanup of the Mediatek CMDQ driver and some related bits

   - Kconfig changes for riscv drivers to prepare for adding Kanaan k230
     support

   - Multiple minor updates for the TI sysc bus driver, memory
     controllers, hisilicon hccs and more"

* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
  firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
  soc: qcom: pmic_glink: Make client-lock non-sleeping
  dt-bindings: soc: qcom,wcnss: fix bluetooth address example
  soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
  bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
  bus: etzpc: introduce ETZPC firewall controller driver
  firmware: arm_ffa: Avoid queuing work when running on the worker queue
  bus: ti-sysc: Drop legacy idle quirk handling
  bus: ti-sysc: Drop legacy quirk handling for smartreflex
  bus: ti-sysc: Drop legacy quirk handling for uarts
  bus: ti-sysc: Add a description and copyrights
  bus: ti-sysc: Move check for no-reset-on-init
  soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
  soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
  firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
  bus: rifsc: introduce RIFSC firewall controller driver
  of: property: fw_devlink: Add support for "access-controller"
  soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
  soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
  soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
  ...

32 files changed, 476 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/access-controllers/access-controllers.yaml b/Documentation/devicetree/bindings/access-controllers/access-controllers.yaml
new file mode 100644
index 00000000000000..99e2865f0e46a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/access-controllers/access-controllers.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/access-controllers/access-controllers.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Domain Access Controllers
+
+maintainers:
+  - Oleksii Moisieiev <oleksii_moisieiev@epam.com>
+
+description: |+
+  Common access controllers properties
+
+  Access controllers are in charge of stating which of the hardware blocks under
+  their responsibility (their domain) can be accesssed by which compartment. A
+  compartment can be a cluster of CPUs (or coprocessors), a range of addresses
+  or a group of hardware blocks. An access controller's domain is the set of
+  resources covered by the access controller.
+
+  This device tree binding can be used to bind devices to their access
+  controller provided by access-controllers property. In this case, the device
+  is a consumer and the access controller is the provider.
+
+  An access controller can be represented by any node in the device tree and
+  can provide one or more configuration parameters, needed to control parameters
+  of the consumer device. A consumer node can refer to the provider by phandle
+  and a set of phandle arguments, specified by '#access-controller-cells'
+  property in the access controller node.
+
+  Access controllers are typically used to set/read the permissions of a
+  hardware block and grant access to it. Any of which depends on the access
+  controller. The capabilities of each access controller are defined by the
+  binding of the access controller device.
+
+  Each node can be a consumer for the several access controllers.
+
+# always select the core schema
+select: true
+
+properties:
+  "#access-controller-cells":
+    description:
+      Number of cells in an access-controllers specifier;
+      Can be any value as specified by device tree binding documentation
+      of a particular provider. The node is an access controller.
+
+  access-controller-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      A list of access-controllers names, sorted in the same order as
+      access-controllers entries. Consumer drivers will use
+      access-controller-names to match with existing access-controllers entries.
+
+  access-controllers:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      A list of access controller specifiers, as defined by the
+      bindings of the access-controllers provider.
+
+additionalProperties: true
+
+examples:
+  - |
+    clock_controller: access-controllers@50000 {
+        reg = <0x50000 0x400>;
+        #access-controller-cells = <2>;
+    };
+
+    bus_controller: bus@60000 {
+        reg = <0x60000 0x10000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        #access-controller-cells = <3>;
+
+        uart4: serial@60100 {
+            reg = <0x60100 0x400>;
+            clocks = <&clk_serial>;
+            access-controllers = <&clock_controller 1 2>,
+                                 <&bus_controller 1 3 5>;
+            access-controller-names = "clock", "bus";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml
new file mode 100644
index 00000000000000..d12b62a3a5a88c
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/st,stm32-etzpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 Extended TrustZone protection controller
+
+description: |
+  The ETZPC configures TrustZone security in a SoC having bus masters and
+  devices with programmable-security attributes (securable resources).
+
+maintainers:
+  - Gatien Chevallier <gatien.chevallier@foss.st.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: st,stm32-etzpc
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: st,stm32-etzpc
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  "#access-controller-cells":
+    const: 1
+    description:
+      Contains the firewall ID associated to the peripheral.
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    description: Peripherals
+    type: object
+
+    additionalProperties: true
+
+    required:
+      - access-controllers
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - "#access-controller-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    // In this example, the usart2 device refers to rifsc as its access
+    // controller.
+    // Access rights are verified before creating devices.
+
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp13-clks.h>
+    #include <dt-bindings/reset/stm32mp13-resets.h>
+
+    etzpc: bus@5c007000 {
+        compatible = "st,stm32-etzpc", "simple-bus";
+        reg = <0x5c007000 0x400>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        #access-controller-cells = <1>;
+        ranges;
+
+        usart2: serial@4c001000 {
+            compatible = "st,stm32h7-uart";
+            reg = <0x4c001000 0x400>;
+            interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&rcc USART2_K>;
+            resets = <&rcc USART2_R>;
+            wakeup-source;
+            dmas = <&dmamux1 43 0x400 0x5>,
+                    <&dmamux1 44 0x400 0x1>;
+            dma-names = "rx", "tx";
+            access-controllers = <&etzpc 17>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml
new file mode 100644
index 00000000000000..20acd1a6b17362
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/st,stm32mp25-rifsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 Resource isolation framework security controller
+
+maintainers:
+  - Gatien Chevallier <gatien.chevallier@foss.st.com>
+
+description: |
+  Resource isolation framework (RIF) is a comprehensive set of hardware blocks
+  designed to enforce and manage isolation of STM32 hardware resources like
+  memory and peripherals.
+
+  The RIFSC (RIF security controller) is composed of three sets of registers,
+  each managing a specific set of hardware resources:
+    - RISC registers associated with RISUP logic (resource isolation device unit
+      for peripherals), assign all non-RIF aware peripherals to zero, one or
+      any security domains (secure, privilege, compartment).
+    - RIMC registers: associated with RIMU logic (resource isolation master
+      unit), assign all non RIF-aware bus master to one security domain by
+      setting secure, privileged and compartment information on the system bus.
+      Alternatively, the RISUP logic controlling the device port access to a
+      peripheral can assign target bus attributes to this peripheral master port
+      (supported attribute: CID).
+    - RISC registers associated with RISAL logic (resource isolation device unit
+      for address space - Lite version), assign address space subregions to one
+      security domains (secure, privilege, compartment).
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: st,stm32mp25-rifsc
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: st,stm32mp25-rifsc
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  "#access-controller-cells":
+    const: 1
+    description:
+      Contains the firewall ID associated to the peripheral.
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    description: Peripherals
+    type: object
+
+    additionalProperties: true
+
+    required:
+      - access-controllers
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - "#access-controller-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    // In this example, the usart2 device refers to rifsc as its domain
+    // controller.
+    // Access rights are verified before creating devices.
+
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rifsc: bus@42080000 {
+        compatible = "st,stm32mp25-rifsc", "simple-bus";
+        reg = <0x42080000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        #access-controller-cells = <1>;
+        ranges;
+
+        usart2: serial@400e0000 {
+              compatible = "st,stm32h7-uart";
+              reg = <0x400e0000 0x400>;
+              interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+              clocks = <&ck_flexgen_08>;
+              access-controllers = <&rifsc 32>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
index 0ddeb8a9a7a018..27354658d05448 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
@@ -46,6 +46,10 @@ properties:
   power-domains:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
index ac480765cde061..82231841409521 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
@@ -51,6 +51,10 @@ properties:
   power-domains:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
index 329847ef096a1f..ff935a0068ec58 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
@@ -82,6 +82,10 @@ properties:
     description: if defined, it indicates that the controller
       supports memory-to-memory transfer
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
index e722fbcd8a5f43..ddf82bf1e71aeb 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
@@ -28,6 +28,10 @@ properties:
   resets:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index 4591523b51a0d4..7de2c29606e5aa 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -247,6 +247,37 @@ properties:
       reg:
         const: 0x18
 
+  protocol@19:
+    type: object
+    allOf:
+      - $ref: '#/$defs/protocol-node'
+      - $ref: /schemas/pinctrl/pinctrl.yaml
+
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x19
+
+    patternProperties:
+      '-pins$':
+        type: object
+        allOf:
+          - $ref: /schemas/pinctrl/pincfg-node.yaml#
+          - $ref: /schemas/pinctrl/pinmux-node.yaml#
+        unevaluatedProperties: false
+
+        description:
+          A pin multiplexing sub-node describes how to configure a
+          set of pins in some desired function.
+          A single sub-node may define several pin configurations.
+          This sub-node is using the default pinctrl bindings to configure
+          pin multiplexing and using SCMI protocol to apply a specified
+          configuration.
+
+    required:
+      - reg
+
 additionalProperties: false
 
 $defs:
@@ -355,7 +386,7 @@ examples:
 
             scmi_dvfs: protocol@13 {
                 reg = <0x13>;
-                #clock-cells = <1>;
+                #power-domain-cells = <1>;
 
                 mboxes = <&mhuB 1 0>,
                          <&mhuB 1 1>;
@@ -401,6 +432,25 @@ examples:
             scmi_powercap: protocol@18 {
                 reg = <0x18>;
             };
+
+            scmi_pinctrl: protocol@19 {
+                reg = <0x19>;
+
+                i2c2-pins {
+                    groups = "g_i2c2_a", "g_i2c2_b";
+                    function = "f_i2c2";
+                };
+
+                mdio-pins {
+                    groups = "g_avb_mdio";
+                    drive-strength = <24>;
+                };
+
+                keys_pins: keys-pins {
+                    pins = "gpio_5_17", "gpio_5_20", "gpio_5_22", "gpio_2_1";
+                    bias-pull-up;
+                };
+            };
         };
     };
 
@@ -468,7 +518,7 @@ examples:
                 reg = <0x13>;
                 linaro,optee-channel-id = <1>;
                 shmem = <&cpu_optee_lpri0>;
-                #clock-cells = <1>;
+                #power-domain-cells = <1>;
             };
 
             scmi_clk0: protocol@14 {
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index 1b31b87c1800a0..8fd8be76875ec1 100644
--- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -127,6 +127,10 @@ properties:
 
   wakeup-source: true
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
index 995cbf8cefc66f..ec34c48d48782b 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@@ -93,6 +93,10 @@ properties:
   '#size-cells':
     const: 0
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 allOf:
   - if:
       properties:
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 1970503389aa9a..c1b1324fa13295 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -59,6 +59,10 @@ properties:
       If not, SPI CLKOUT frequency will not be accurate.
     maximum: 20000000
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
index 04045b932bd221..b15de4eb209c53 100644
--- a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
@@ -45,6 +45,10 @@ properties:
   '#size-cells':
     const: 0
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 additionalProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
index 2314a9a1465098..1d930d9e10fd83 100644
--- a/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
+++ b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
@@ -29,6 +29,10 @@ properties:
       - const: cec
       - const: hdmi-cec
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
index 6b3e413cedb259..34147127192fd8 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
@@ -36,6 +36,10 @@ properties:
   resets:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
     unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml
new file mode 100644
index 00000000000000..c0e47055f28caf
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/samsung,s5pv210-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5Pv210 SoC Dynamic Memory Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  Dynamic Memory Controller interfaces external JEDEC DDR-type SDRAM.
+
+properties:
+  compatible:
+    const: samsung,s5pv210-dmc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@f0000000 {
+        compatible = "samsung,s5pv210-dmc";
+        reg = <0xf0000000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
index 84ac6f50a6fc3f..706e45eb4d279f 100644
--- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -50,6 +50,10 @@ properties:
       Reflects the memory layout with four integer values per bank. Format:
       <bank-number> 0 <address of the bank> <size>
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 patternProperties:
   "^.*@[0-4],[a-f0-9]+$":
     additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
index 27329c5dc38e6e..d41308856408fc 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
@@ -44,6 +44,10 @@ properties:
 
   wakeup-source: true
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
   pwm:
     type: object
     additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
index f84e09a5743b77..b0e438ff49509e 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
@@ -67,6 +67,10 @@ properties:
   "#size-cells":
     const: 0
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
   pwm:
     type: object
     additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
index 940b1268816746..8f62e2c7fa6414 100644
--- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -79,6 +79,10 @@ properties:
           - const: rx
           - const: tx
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
   power-domains: true
 
   resets:
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
index f9ffb963d6b122..c4887522e8fe97 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -118,6 +118,10 @@ properties:
   phys:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index fc8c96b08d7dca..f2714b5b6cf426 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -93,6 +93,10 @@ properties:
       select RCC clock instead of ETH_REF_CLK.
     type: boolean
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - clocks
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 24a3dbde223bc3..ceea122ae1a6a7 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -55,6 +55,10 @@ properties:
     description: number of clock cells for ck_usbo_48m consumer
     const: 0
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 # Required child nodes:
 
 patternProperties:
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
index 05f4ad2c7d3a1d..6ceaffb45dc968 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
@@ -30,6 +30,10 @@ properties:
   vdda-supply:
     description: phandle to the vdda input analog voltage.
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
index 717f6b321f884d..340d01d481d12c 100644
--- a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
@@ -37,6 +37,10 @@ properties:
     description: If set, the RNG configuration in RNG_CR, RNG_HTCR and
                   RNG_NSCR will be locked.
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 62f97da1b2fd7c..2ed526139269c2 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -73,6 +73,10 @@ properties:
     enum: [1, 2, 4, 8, 12, 14, 16]
     default: 8
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 allOf:
   - $ref: rs485.yaml#
   - $ref: serial.yaml#
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
index 74bb92e3155413..fd6db0ca98eb7e 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
@@ -116,8 +116,8 @@ examples:
 
             bluetooth {
                 compatible = "qcom,wcnss-bt";
-                /* BD address 00:11:22:33:44:55 */
-                local-bd-address = [ 55 44 33 22 11 00 ];
+                /* Updated by boot firmware (little-endian order) */
+                local-bd-address = [ 00 00 00 00 00 00 ];
             };
 
             wifi {
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
index b9111d375b93f5..8978f6bd63e59e 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
@@ -65,6 +65,10 @@ properties:
     $ref: audio-graph-port.yaml#
     unevaluatedProperties: false
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - "#sound-dai-cells"
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
index 59df8a832310da..b46a4778807d45 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -48,6 +48,10 @@ properties:
   clock-names:
     maxItems: 3
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
index bc48151b9adbdc..3dedc81ec12f67 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
@@ -50,6 +50,10 @@ properties:
   resets:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - "#sound-dai-cells"
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
index 8bba965a9ae64e..3f1a27efff80e5 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
@@ -46,6 +46,10 @@ properties:
       - const: tx
       - const: rx
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
index 4bd9aeb8120859..a55c8633c32ce9 100644
--- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
@@ -52,6 +52,10 @@ properties:
       - const: rx
       - const: tx
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index 0a5c98ea711d48..88c077673c8bc8 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -172,6 +172,10 @@ properties:
 
   tpl-support: true
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 dependencies:
   port: [ usb-role-switch ]
   role-switch-default-mode: [ usb-role-switch ]