Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

8 files changed, 89 insertions, 71 deletions

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 2d1c4c35186d26..166a29fe6c35f6 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1169,8 +1169,7 @@ static int sta_apply_parameters(struct ieee80211_local *local,
 		 * rc isn't initialized here yet, so ignore it
 		 */
 		__ieee80211_vht_handle_opmode(sdata, sta,
-					      params->opmode_notif,
-					      band, false);
+					      params->opmode_notif, band);
 	}
 
 	if (ieee80211_vif_is_mesh(&sdata->vif))
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index c30b6842ed9f93..b84f6aa32c0831 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1716,10 +1716,10 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta);
 void ieee80211_sta_set_rx_nss(struct sta_info *sta);
 u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
                                   struct sta_info *sta, u8 opmode,
-                                  enum ieee80211_band band, bool nss_only);
+				  enum ieee80211_band band);
 void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
 				 struct sta_info *sta, u8 opmode,
-				 enum ieee80211_band band, bool nss_only);
+				 enum ieee80211_band band);
 void ieee80211_apply_vhtcap_overrides(struct ieee80211_sub_if_data *sdata,
 				      struct ieee80211_sta_vht_cap *vht_cap);
 void ieee80211_get_vht_mask_from_cap(__le16 vht_cap,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 123b26d177e803..1c342e2592c4ab 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1379,21 +1379,26 @@ static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
 	 */
 	if (has_80211h_pwr &&
 	    (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
+		new_ap_level = pwr_level_80211h;
+
+		if (sdata->ap_power_level == new_ap_level)
+			return 0;
+
 		sdata_dbg(sdata,
 			  "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
 			  pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
 			  sdata->u.mgd.bssid);
-		new_ap_level = pwr_level_80211h;
 	} else {  /* has_cisco_pwr is always true here. */
+		new_ap_level = pwr_level_cisco;
+
+		if (sdata->ap_power_level == new_ap_level)
+			return 0;
+
 		sdata_dbg(sdata,
 			  "Limiting TX power to %d dBm as advertised by %pM\n",
 			  pwr_level_cisco, sdata->u.mgd.bssid);
-		new_ap_level = pwr_level_cisco;
 	}
 
-	if (sdata->ap_power_level == new_ap_level)
-		return 0;
-
 	sdata->ap_power_level = new_ap_level;
 	if (__ieee80211_recalc_txpower(sdata))
 		return BSS_CHANGED_TXPOWER;
@@ -3577,7 +3582,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 
 	if (sta && elems.opmode_notif)
 		ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
-					    rx_status->band, true);
+					    rx_status->band);
 	mutex_unlock(&local->sta_mtx);
 
 	changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt,
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 1f827539d828be..bc081850ac0e55 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2735,8 +2735,7 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
 			opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode;
 
 			ieee80211_vht_handle_opmode(rx->sdata, rx->sta,
-						    opmode, status->band,
-						    false);
+						    opmode, status->band);
 			goto handled;
 		}
 		default:
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 08af2b30794580..3943d4bf289c29 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1644,6 +1644,29 @@ void ieee80211_stop_device(struct ieee80211_local *local)
 	drv_stop(local);
 }
 
+static void ieee80211_flush_completed_scan(struct ieee80211_local *local,
+					   bool aborted)
+{
+	/* It's possible that we don't handle the scan completion in
+	 * time during suspend, so if it's still marked as completed
+	 * here, queue the work and flush it to clean things up.
+	 * Instead of calling the worker function directly here, we
+	 * really queue it to avoid potential races with other flows
+	 * scheduling the same work.
+	 */
+	if (test_bit(SCAN_COMPLETED, &local->scanning)) {
+		/* If coming from reconfiguration failure, abort the scan so
+		 * we don't attempt to continue a partial HW scan - which is
+		 * possible otherwise if (e.g.) the 2.4 GHz portion was the
+		 * completed scan, and a 5 GHz portion is still pending.
+		 */
+		if (aborted)
+			set_bit(SCAN_ABORTED, &local->scanning);
+		ieee80211_queue_delayed_work(&local->hw, &local->scan_work, 0);
+		flush_delayed_work(&local->scan_work);
+	}
+}
+
 static void ieee80211_handle_reconfig_failure(struct ieee80211_local *local)
 {
 	struct ieee80211_sub_if_data *sdata;
@@ -1663,6 +1686,8 @@ static void ieee80211_handle_reconfig_failure(struct ieee80211_local *local)
 	local->suspended = false;
 	local->in_reconfig = false;
 
+	ieee80211_flush_completed_scan(local, true);
+
 	/* scheduled scan clearly can't be running any more, but tell
 	 * cfg80211 and clear local state
 	 */
@@ -1701,6 +1726,27 @@ static void ieee80211_assign_chanctx(struct ieee80211_local *local,
 	mutex_unlock(&local->chanctx_mtx);
 }
 
+static void ieee80211_reconfig_stations(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct sta_info *sta;
+
+	/* add STAs back */
+	mutex_lock(&local->sta_mtx);
+	list_for_each_entry(sta, &local->sta_list, list) {
+		enum ieee80211_sta_state state;
+
+		if (!sta->uploaded || sta->sdata != sdata)
+			continue;
+
+		for (state = IEEE80211_STA_NOTEXIST;
+		     state < sta->sta_state; state++)
+			WARN_ON(drv_sta_state(local, sta->sdata, sta, state,
+					      state + 1));
+	}
+	mutex_unlock(&local->sta_mtx);
+}
+
 int ieee80211_reconfig(struct ieee80211_local *local)
 {
 	struct ieee80211_hw *hw = &local->hw;
@@ -1836,50 +1882,11 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 				WARN_ON(drv_add_chanctx(local, ctx));
 		mutex_unlock(&local->chanctx_mtx);
 
-		list_for_each_entry(sdata, &local->interfaces, list) {
-			if (!ieee80211_sdata_running(sdata))
-				continue;
-			ieee80211_assign_chanctx(local, sdata);
-		}
-
 		sdata = rtnl_dereference(local->monitor_sdata);
 		if (sdata && ieee80211_sdata_running(sdata))
 			ieee80211_assign_chanctx(local, sdata);
 	}
 
-	/* add STAs back */
-	mutex_lock(&local->sta_mtx);
-	list_for_each_entry(sta, &local->sta_list, list) {
-		enum ieee80211_sta_state state;
-
-		if (!sta->uploaded)
-			continue;
-
-		/* AP-mode stations will be added later */
-		if (sta->sdata->vif.type == NL80211_IFTYPE_AP)
-			continue;
-
-		for (state = IEEE80211_STA_NOTEXIST;
-		     state < sta->sta_state; state++)
-			WARN_ON(drv_sta_state(local, sta->sdata, sta, state,
-					      state + 1));
-	}
-	mutex_unlock(&local->sta_mtx);
-
-	/* reconfigure tx conf */
-	if (hw->queues >= IEEE80211_NUM_ACS) {
-		list_for_each_entry(sdata, &local->interfaces, list) {
-			if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
-			    sdata->vif.type == NL80211_IFTYPE_MONITOR ||
-			    !ieee80211_sdata_running(sdata))
-				continue;
-
-			for (i = 0; i < IEEE80211_NUM_ACS; i++)
-				drv_conf_tx(local, sdata, i,
-					    &sdata->tx_conf[i]);
-		}
-	}
-
 	/* reconfigure hardware */
 	ieee80211_hw_config(local, ~0);
 
@@ -1892,6 +1899,22 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		if (!ieee80211_sdata_running(sdata))
 			continue;
 
+		ieee80211_assign_chanctx(local, sdata);
+
+		switch (sdata->vif.type) {
+		case NL80211_IFTYPE_AP_VLAN:
+		case NL80211_IFTYPE_MONITOR:
+			break;
+		default:
+			ieee80211_reconfig_stations(sdata);
+			/* fall through */
+		case NL80211_IFTYPE_AP: /* AP stations are handled later */
+			for (i = 0; i < IEEE80211_NUM_ACS; i++)
+				drv_conf_tx(local, sdata, i,
+					    &sdata->tx_conf[i]);
+			break;
+		}
+
 		/* common change flags for all interface types */
 		changed = BSS_CHANGED_ERP_CTS_PROT |
 			  BSS_CHANGED_ERP_PREAMBLE |
@@ -2077,17 +2100,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 	mb();
 	local->resuming = false;
 
-	/* It's possible that we don't handle the scan completion in
-	 * time during suspend, so if it's still marked as completed
-	 * here, queue the work and flush it to clean things up.
-	 * Instead of calling the worker function directly here, we
-	 * really queue it to avoid potential races with other flows
-	 * scheduling the same work.
-	 */
-	if (test_bit(SCAN_COMPLETED, &local->scanning)) {
-		ieee80211_queue_delayed_work(&local->hw, &local->scan_work, 0);
-		flush_delayed_work(&local->scan_work);
-	}
+	ieee80211_flush_completed_scan(local, false);
 
 	if (local->open_count && !reconfig_due_to_wowlan)
 		drv_reconfig_complete(local, IEEE80211_RECONFIG_TYPE_SUSPEND);
diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c
index ff1c798921a6ac..c38b2f07a919e2 100644
--- a/net/mac80211/vht.c
+++ b/net/mac80211/vht.c
@@ -378,7 +378,7 @@ void ieee80211_sta_set_rx_nss(struct sta_info *sta)
 
 u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
 				  struct sta_info *sta, u8 opmode,
-				  enum ieee80211_band band, bool nss_only)
+				  enum ieee80211_band band)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_supported_band *sband;
@@ -401,9 +401,6 @@ u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
 		changed |= IEEE80211_RC_NSS_CHANGED;
 	}
 
-	if (nss_only)
-		return changed;
-
 	switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) {
 	case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ:
 		sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20;
@@ -430,13 +427,12 @@ u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
 
 void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
 				 struct sta_info *sta, u8 opmode,
-				 enum ieee80211_band band, bool nss_only)
+				 enum ieee80211_band band)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
 
-	u32 changed = __ieee80211_vht_handle_opmode(sdata, sta, opmode,
-						    band, nss_only);
+	u32 changed = __ieee80211_vht_handle_opmode(sdata, sta, opmode, band);
 
 	if (changed > 0)
 		rate_control_rate_update(local, sband, sta, changed);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 72de6989dd1246..d4786f2802aa3c 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -7973,8 +7973,10 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
 	if (nla_get_flag(info->attrs[NL80211_ATTR_USE_RRM])) {
 		if (!(rdev->wiphy.features &
 		      NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES) ||
-		    !(rdev->wiphy.features & NL80211_FEATURE_QUIET))
+		    !(rdev->wiphy.features & NL80211_FEATURE_QUIET)) {
+			kzfree(connkeys);
 			return -EINVAL;
+		}
 		connect.flags |= ASSOC_REQ_USE_RRM;
 	}
 
@@ -9535,6 +9537,7 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info)
 	if (new_triggers.tcp && new_triggers.tcp->sock)
 		sock_release(new_triggers.tcp->sock);
 	kfree(new_triggers.tcp);
+	kfree(new_triggers.nd_config);
 	return err;
 }
 #endif
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index d53ef141055b38..77119b4d38fac1 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2960,6 +2960,7 @@ int set_regdom(const struct ieee80211_regdomain *rd,
 		break;
 	default:
 		WARN(1, "invalid initiator %d\n", lr->initiator);
+		kfree(rd);
 		return -EINVAL;
 	}
 
@@ -3152,8 +3153,10 @@ int __init regulatory_init(void)
 	/* We always try to get an update for the static regdomain */
 	err = regulatory_hint_core(cfg80211_world_regdom->alpha2);
 	if (err) {
-		if (err == -ENOMEM)
+		if (err == -ENOMEM) {
+			platform_device_unregister(reg_pdev);
 			return err;
+		}
 		/*
 		 * N.B. kobject_uevent_env() can fail mainly for when we're out
 		 * memory which is handled and propagated appropriately above