Merge tag 'vfio-for-v3.7-rc1' of git://github.com/awilliam/linux-vfio

Pull vfio fixes from Alex Williamson:
 "This includes a fix for PCI BAR mmaps after recent mm changes, fixing
  an interrupt race, and fixing a consistency bug in interrupt state
  when switching interrupt modes."

* tag 'vfio-for-v3.7-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: Fix PCI INTx disable consistency
  vfio: Move PCI INTx eventfd setting earlier
  vfio: Fix PCI mmap after b3b9c293

2 files changed, 18 insertions, 7 deletions

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 6d369fe9d30bef..6c119944bbb6e8 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -408,7 +408,7 @@ static int vfio_pci_mmap(void *device_data, struct vm_area_struct *vma)
 	struct vfio_pci_device *vdev = device_data;
 	struct pci_dev *pdev = vdev->pdev;
 	unsigned int index;
-	u64 phys_len, req_len, pgoff, req_start, phys;
+	u64 phys_len, req_len, pgoff, req_start;
 	int ret;
 
 	index = vma->vm_pgoff >> (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT);
@@ -463,10 +463,9 @@ static int vfio_pci_mmap(void *device_data, struct vm_area_struct *vma)
 	vma->vm_private_data = vdev;
 	vma->vm_flags |= VM_IO | VM_DONTEXPAND | VM_DONTDUMP;
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	vma->vm_pgoff = (pci_resource_start(pdev, index) >> PAGE_SHIFT) + pgoff;
 
-	phys = (pci_resource_start(pdev, index) >> PAGE_SHIFT) + pgoff;
-
-	return remap_pfn_range(vma, vma->vm_start, phys,
+	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
 			       req_len, vma->vm_page_prot);
 }
 
diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
index d8dedc7d3910c7..3639371fa697e6 100644
--- a/drivers/vfio/pci/vfio_pci_intrs.c
+++ b/drivers/vfio/pci/vfio_pci_intrs.c
@@ -366,6 +366,17 @@ static int vfio_intx_enable(struct vfio_pci_device *vdev)
 		return -ENOMEM;
 
 	vdev->num_ctx = 1;
+
+	/*
+	 * If the virtual interrupt is masked, restore it.  Devices
+	 * supporting DisINTx can be masked at the hardware level
+	 * here, non-PCI-2.3 devices will have to wait until the
+	 * interrupt is enabled.
+	 */
+	vdev->ctx[0].masked = vdev->virq_disabled;
+	if (vdev->pci_2_3)
+		pci_intx(vdev->pdev, !vdev->ctx[0].masked);
+
 	vdev->irq_type = VFIO_PCI_INTX_IRQ_INDEX;
 
 	return 0;
@@ -400,25 +411,26 @@ static int vfio_intx_set_signal(struct vfio_pci_device *vdev, int fd)
 		return PTR_ERR(trigger);
 	}
 
+	vdev->ctx[0].trigger = trigger;
+
 	if (!vdev->pci_2_3)
 		irqflags = 0;
 
 	ret = request_irq(pdev->irq, vfio_intx_handler,
 			  irqflags, vdev->ctx[0].name, vdev);
 	if (ret) {
+		vdev->ctx[0].trigger = NULL;
 		kfree(vdev->ctx[0].name);
 		eventfd_ctx_put(trigger);
 		return ret;
 	}
 
-	vdev->ctx[0].trigger = trigger;
-
 	/*
 	 * INTx disable will stick across the new irq setup,
 	 * disable_irq won't.
 	 */
 	spin_lock_irqsave(&vdev->irqlock, flags);
-	if (!vdev->pci_2_3 && (vdev->ctx[0].masked || vdev->virq_disabled))
+	if (!vdev->pci_2_3 && vdev->ctx[0].masked)
 		disable_irq_nosync(pdev->irq);
 	spin_unlock_irqrestore(&vdev->irqlock, flags);