xfs_repair: always rewrite secondary supers when needsrepair is set

Dave Chinner complained about xfs_scrub failures coming from xfs/158.
That test induces xfs_repair to fail while upgrading a filesystem to
have the inobtcount feature, and then restarts xfs_repair to finish the
upgrade.  When the second xfs_repair run starts, it will find that the
primary super has NEEDSREPAIR set, along with whatever new feature that
we were trying to add to the filesystem.

From there, repair completes the upgrade in much the same manner as the
first repair run would have, with one big exception -- it forgets to set
features_changed to trigger rewriting of the secondary supers at the end
of repair.  This results in discrepancies between the supers:

# XFS_REPAIR_FAIL_AFTER_PHASE=2 xfs_repair -c inobtcount=1 /dev/sdf
Phase 1 - find and verify superblock...
Phase 2 - using internal log
        - zero log...
        - scan filesystem freespace and inode maps...
        - found root inode chunk
Adding inode btree counts to filesystem.
Killed
# xfs_repair /dev/sdf
Phase 1 - find and verify superblock...
Phase 2 - using internal log
        - zero log...
        - scan filesystem freespace and inode maps...
clearing needsrepair flag and regenerating metadata
bad inobt block count 0, saw 1
bad finobt block count 0, saw 1
bad inobt block count 0, saw 1
bad finobt block count 0, saw 1
bad inobt block count 0, saw 1
bad finobt block count 0, saw 1
bad inobt block count 0, saw 1
bad finobt block count 0, saw 1
        - found root inode chunk
Phase 3 - for each AG...
        - scan and clear agi unlinked lists...
        - process known inodes and perform inode discovery...
        - agno = 0
        - agno = 1
        - agno = 2
        - agno = 3
        - process newly discovered inodes...
Phase 4 - check for duplicate blocks...
        - setting up duplicate extent list...
        - check for inodes claiming duplicate blocks...
        - agno = 1
        - agno = 2
        - agno = 0
        - agno = 3
Phase 5 - rebuild AG headers and trees...
        - reset superblock...
Phase 6 - check inode connectivity...
        - resetting contents of realtime bitmap and summary inodes
        - traversing filesystem ...
        - traversal finished ...
        - moving disconnected inodes to lost+found ...
Phase 7 - verify and correct link counts...
done
# xfs_db -c 'sb 0' -c 'print' -c 'sb 1' -c 'print' /dev/sdf | \
	egrep '(features_ro_compat|features_incompat)'
features_ro_compat = 0xd
features_incompat = 0xb
features_ro_compat = 0x5
features_incompat = 0xb

Curiously, re-running xfs_repair will not trigger any warnings about the
featureset mismatch between the primary and secondary supers.  xfs_scrub
immediately notices, which is what causes xfs/158 to fail.

This discrepancy doesn't happen when the upgrade completes successfully
in a single repair run, so we need to teach repair to rewrite the
secondaries at the end of repair any time needsrepair was set.

Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>

1 files changed, 8 insertions, 0 deletions

diff --git a/repair/agheader.c b/repair/agheader.c
index 36da13951d..e91509d0e3 100644
--- a/repair/agheader.c
+++ b/repair/agheader.c
@@ -552,6 +552,14 @@ secondary_sb_whack(
 			else
 				do_warn(
 	_("would clear needsrepair flag and regenerate metadata\n"));
+			/*
+			 * If needsrepair is set on the primary super, there's
+			 * a possibility that repair crashed during an upgrade.
+			 * Set features_changed to ensure that the secondary
+			 * supers are rewritten with the new feature bits once
+			 * we've finished the upgrade.
+			 */
+			features_changed = true;
 		} else {
 			/*
 			 * Quietly clear needsrepair on the secondary supers as