Merge branch 'fixes' into misc

34 files changed, 283 insertions, 236 deletions

diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
index 106687f4f6b770..0c7efaf62de0c0 100644
--- a/Documentation/ABI/testing/sysfs-driver-ufs
+++ b/Documentation/ABI/testing/sysfs-driver-ufs
@@ -994,7 +994,7 @@ Description:	This file shows the amount of physical memory needed
 What:		/sys/bus/platform/drivers/ufshcd/*/rpm_lvl
 What:		/sys/bus/platform/devices/*.ufs/rpm_lvl
 Date:		September 2014
-Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This entry could be used to set or show the UFS device
 		runtime power management level. The current driver
 		implementation supports 7 levels with next target states:
@@ -1021,7 +1021,7 @@ Description:	This entry could be used to set or show the UFS device
 What:		/sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state
 What:		/sys/bus/platform/devices/*.ufs/rpm_target_dev_state
 Date:		February 2018
-Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This entry shows the target power mode of an UFS device
 		for the chosen runtime power management level.
 
@@ -1030,7 +1030,7 @@ Description:	This entry shows the target power mode of an UFS device
 What:		/sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state
 What:		/sys/bus/platform/devices/*.ufs/rpm_target_link_state
 Date:		February 2018
-Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This entry shows the target state of an UFS UIC link
 		for the chosen runtime power management level.
 
@@ -1039,7 +1039,7 @@ Description:	This entry shows the target state of an UFS UIC link
 What:		/sys/bus/platform/drivers/ufshcd/*/spm_lvl
 What:		/sys/bus/platform/devices/*.ufs/spm_lvl
 Date:		September 2014
-Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This entry could be used to set or show the UFS device
 		system power management level. The current driver
 		implementation supports 7 levels with next target states:
@@ -1066,7 +1066,7 @@ Description:	This entry could be used to set or show the UFS device
 What:		/sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state
 What:		/sys/bus/platform/devices/*.ufs/spm_target_dev_state
 Date:		February 2018
-Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This entry shows the target power mode of an UFS device
 		for the chosen system power management level.
 
@@ -1075,7 +1075,7 @@ Description:	This entry shows the target power mode of an UFS device
 What:		/sys/bus/platform/drivers/ufshcd/*/spm_target_link_state
 What:		/sys/bus/platform/devices/*.ufs/spm_target_link_state
 Date:		February 2018
-Contact:	Subhash Jadavani <subhashj@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This entry shows the target state of an UFS UIC link
 		for the chosen system power management level.
 
@@ -1084,7 +1084,7 @@ Description:	This entry shows the target state of an UFS UIC link
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/monitor_enable
 What:		/sys/bus/platform/devices/*.ufs/monitor/monitor_enable
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the status of performance monitor enablement
 		and it can be used to start/stop the monitor. When the monitor
 		is stopped, the performance data collected is also cleared.
@@ -1092,7 +1092,7 @@ Description:	This file shows the status of performance monitor enablement
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/monitor_chunk_size
 What:		/sys/bus/platform/devices/*.ufs/monitor/monitor_chunk_size
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file tells the monitor to focus on requests transferring
 		data of specific chunk size (in Bytes). 0 means any chunk size.
 		It can only be changed when monitor is disabled.
@@ -1100,7 +1100,7 @@ Description:	This file tells the monitor to focus on requests transferring
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_total_sectors
 What:		/sys/bus/platform/devices/*.ufs/monitor/read_total_sectors
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows how many sectors (in 512 Bytes) have been
 		sent from device to host after monitor gets started.
 
@@ -1109,7 +1109,7 @@ Description:	This file shows how many sectors (in 512 Bytes) have been
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_total_busy
 What:		/sys/bus/platform/devices/*.ufs/monitor/read_total_busy
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows how long (in micro seconds) has been spent
 		sending data from device to host after monitor gets started.
 
@@ -1118,7 +1118,7 @@ Description:	This file shows how long (in micro seconds) has been spent
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_nr_requests
 What:		/sys/bus/platform/devices/*.ufs/monitor/read_nr_requests
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows how many read requests have been sent after
 		monitor gets started.
 
@@ -1127,7 +1127,7 @@ Description:	This file shows how many read requests have been sent after
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_max
 What:		/sys/bus/platform/devices/*.ufs/monitor/read_req_latency_max
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the maximum latency (in micro seconds) of
 		read requests after monitor gets started.
 
@@ -1136,7 +1136,7 @@ Description:	This file shows the maximum latency (in micro seconds) of
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_min
 What:		/sys/bus/platform/devices/*.ufs/monitor/read_req_latency_min
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the minimum latency (in micro seconds) of
 		read requests after monitor gets started.
 
@@ -1145,7 +1145,7 @@ Description:	This file shows the minimum latency (in micro seconds) of
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_avg
 What:		/sys/bus/platform/devices/*.ufs/monitor/read_req_latency_avg
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the average latency (in micro seconds) of
 		read requests after monitor gets started.
 
@@ -1154,7 +1154,7 @@ Description:	This file shows the average latency (in micro seconds) of
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_sum
 What:		/sys/bus/platform/devices/*.ufs/monitor/read_req_latency_sum
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the total latency (in micro seconds) of
 		read requests sent after monitor gets started.
 
@@ -1163,7 +1163,7 @@ Description:	This file shows the total latency (in micro seconds) of
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_total_sectors
 What:		/sys/bus/platform/devices/*.ufs/monitor/write_total_sectors
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows how many sectors (in 512 Bytes) have been sent
 		from host to device after monitor gets started.
 
@@ -1172,7 +1172,7 @@ Description:	This file shows how many sectors (in 512 Bytes) have been sent
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_total_busy
 What:		/sys/bus/platform/devices/*.ufs/monitor/write_total_busy
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows how long (in micro seconds) has been spent
 		sending data from host to device after monitor gets started.
 
@@ -1181,7 +1181,7 @@ Description:	This file shows how long (in micro seconds) has been spent
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_nr_requests
 What:		/sys/bus/platform/devices/*.ufs/monitor/write_nr_requests
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows how many write requests have been sent after
 		monitor gets started.
 
@@ -1190,7 +1190,7 @@ Description:	This file shows how many write requests have been sent after
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_max
 What:		/sys/bus/platform/devices/*.ufs/monitor/write_req_latency_max
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the maximum latency (in micro seconds) of write
 		requests after monitor gets started.
 
@@ -1199,7 +1199,7 @@ Description:	This file shows the maximum latency (in micro seconds) of write
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_min
 What:		/sys/bus/platform/devices/*.ufs/monitor/write_req_latency_min
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the minimum latency (in micro seconds) of write
 		requests after monitor gets started.
 
@@ -1208,7 +1208,7 @@ Description:	This file shows the minimum latency (in micro seconds) of write
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_avg
 What:		/sys/bus/platform/devices/*.ufs/monitor/write_req_latency_avg
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the average latency (in micro seconds) of write
 		requests after monitor gets started.
 
@@ -1217,7 +1217,7 @@ Description:	This file shows the average latency (in micro seconds) of write
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum
 What:		/sys/bus/platform/devices/*.ufs/monitor/write_req_latency_sum
 Date:		January 2021
-Contact:	Can Guo <cang@codeaurora.org>
+Contact:	Can Guo <quic_cang@quicinc.com>
 Description:	This file shows the total latency (in micro seconds) of write
 		requests after monitor gets started.
 
@@ -1226,7 +1226,7 @@ Description:	This file shows the total latency (in micro seconds) of write
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en
 What:		/sys/bus/platform/devices/*.ufs/device_descriptor/wb_presv_us_en
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows if preserve user-space was configured
 
 		The file is read only.
@@ -1234,7 +1234,7 @@ Description:	This entry shows if preserve user-space was configured
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_shared_alloc_units
 What:		/sys/bus/platform/devices/*.ufs/device_descriptor/wb_shared_alloc_units
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the shared allocated units of WB buffer
 
 		The file is read only.
@@ -1242,7 +1242,7 @@ Description:	This entry shows the shared allocated units of WB buffer
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_type
 What:		/sys/bus/platform/devices/*.ufs/device_descriptor/wb_type
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the configured WB type.
 		0x1 for shared buffer mode. 0x0 for dedicated buffer mode.
 
@@ -1251,7 +1251,7 @@ Description:	This entry shows the configured WB type.
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_buff_cap_adj
 What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_buff_cap_adj
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the total user-space decrease in shared
 		buffer mode.
 		The value of this parameter is 3 for TLC NAND when SLC mode
@@ -1262,7 +1262,7 @@ Description:	This entry shows the total user-space decrease in shared
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_alloc_units
 What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_alloc_units
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the Maximum total WriteBooster Buffer size
 		which is supported by the entire device.
 
@@ -1271,7 +1271,7 @@ Description:	This entry shows the Maximum total WriteBooster Buffer size
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_wb_luns
 What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_wb_luns
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the maximum number of luns that can support
 		WriteBooster.
 
@@ -1280,7 +1280,7 @@ Description:	This entry shows the maximum number of luns that can support
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_red_type
 What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_red_type
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	The supportability of user space reduction mode
 		and preserve user space mode.
 		00h: WriteBooster Buffer can be configured only in
@@ -1295,7 +1295,7 @@ Description:	The supportability of user space reduction mode
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_wb_type
 What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_wb_type
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	The supportability of WriteBooster Buffer type.
 
 		===  ==========================================================
@@ -1310,7 +1310,7 @@ Description:	The supportability of WriteBooster Buffer type.
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/wb_enable
 What:		/sys/bus/platform/devices/*.ufs/flags/wb_enable
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the status of WriteBooster.
 
 		== ============================
@@ -1323,7 +1323,7 @@ Description:	This entry shows the status of WriteBooster.
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_en
 What:		/sys/bus/platform/devices/*.ufs/flags/wb_flush_en
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows if flush is enabled.
 
 		== =================================
@@ -1336,7 +1336,7 @@ Description:	This entry shows if flush is enabled.
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_during_h8
 What:		/sys/bus/platform/devices/*.ufs/flags/wb_flush_during_h8
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	Flush WriteBooster Buffer during hibernate state.
 
 		== =================================================
@@ -1351,7 +1351,7 @@ Description:	Flush WriteBooster Buffer during hibernate state.
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_avail_buf
 What:		/sys/bus/platform/devices/*.ufs/attributes/wb_avail_buf
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the amount of unused WriteBooster buffer
 		available.
 
@@ -1360,7 +1360,7 @@ Description:	This entry shows the amount of unused WriteBooster buffer
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_cur_buf
 What:		/sys/bus/platform/devices/*.ufs/attributes/wb_cur_buf
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the amount of unused current buffer.
 
 		The file is read only.
@@ -1368,7 +1368,7 @@ Description:	This entry shows the amount of unused current buffer.
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_flush_status
 What:		/sys/bus/platform/devices/*.ufs/attributes/wb_flush_status
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the flush operation status.
 
 
@@ -1385,7 +1385,7 @@ Description:	This entry shows the flush operation status.
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_life_time_est
 What:		/sys/bus/platform/devices/*.ufs/attributes/wb_life_time_est
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows an indication of the WriteBooster Buffer
 		lifetime based on the amount of performed program/erase cycles
 
@@ -1399,7 +1399,7 @@ Description:	This entry shows an indication of the WriteBooster Buffer
 
 What:		/sys/class/scsi_device/*/device/unit_descriptor/wb_buf_alloc_units
 Date:		June 2020
-Contact:	Asutosh Das <asutoshd@codeaurora.org>
+Contact:	Asutosh Das <quic_asutoshd@quicinc.com>
 Description:	This entry shows the configured size of WriteBooster buffer.
 		0400h corresponds to 4GB.
 
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 0f9f97cdddd99c..619ee41a51cc8c 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -442,7 +442,6 @@ struct blk_revalidate_zone_args {
 	unsigned long	*conv_zones_bitmap;
 	unsigned long	*seq_zones_wlock;
 	unsigned int	nr_zones;
-	sector_t	zone_sectors;
 	sector_t	sector;
 };
 
@@ -456,38 +455,34 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
 	struct gendisk *disk = args->disk;
 	struct request_queue *q = disk->queue;
 	sector_t capacity = get_capacity(disk);
+	sector_t zone_sectors = q->limits.chunk_sectors;
+
+	/* Check for bad zones and holes in the zone report */
+	if (zone->start != args->sector) {
+		pr_warn("%s: Zone gap at sectors %llu..%llu\n",
+			disk->disk_name, args->sector, zone->start);
+		return -ENODEV;
+	}
+
+	if (zone->start >= capacity || !zone->len) {
+		pr_warn("%s: Invalid zone start %llu, length %llu\n",
+			disk->disk_name, zone->start, zone->len);
+		return -ENODEV;
+	}
 
 	/*
 	 * All zones must have the same size, with the exception on an eventual
 	 * smaller last zone.
 	 */
-	if (zone->start == 0) {
-		if (zone->len == 0 || !is_power_of_2(zone->len)) {
-			pr_warn("%s: Invalid zoned device with non power of two zone size (%llu)\n",
-				disk->disk_name, zone->len);
-			return -ENODEV;
-		}
-
-		args->zone_sectors = zone->len;
-		args->nr_zones = (capacity + zone->len - 1) >> ilog2(zone->len);
-	} else if (zone->start + args->zone_sectors < capacity) {
-		if (zone->len != args->zone_sectors) {
+	if (zone->start + zone->len < capacity) {
+		if (zone->len != zone_sectors) {
 			pr_warn("%s: Invalid zoned device with non constant zone size\n",
 				disk->disk_name);
 			return -ENODEV;
 		}
-	} else {
-		if (zone->len > args->zone_sectors) {
-			pr_warn("%s: Invalid zoned device with larger last zone size\n",
-				disk->disk_name);
-			return -ENODEV;
-		}
-	}
-
-	/* Check for holes in the zone report */
-	if (zone->start != args->sector) {
-		pr_warn("%s: Zone gap at sectors %llu..%llu\n",
-			disk->disk_name, args->sector, zone->start);
+	} else if (zone->len > zone_sectors) {
+		pr_warn("%s: Invalid zoned device with larger last zone size\n",
+			disk->disk_name);
 		return -ENODEV;
 	}
 
@@ -526,11 +521,13 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
  * @disk:	Target disk
  * @update_driver_data:	Callback to update driver data on the frozen disk
  *
- * Helper function for low-level device drivers to (re) allocate and initialize
- * a disk request queue zone bitmaps. This functions should normally be called
- * within the disk ->revalidate method for blk-mq based drivers.  For BIO based
- * drivers only q->nr_zones needs to be updated so that the sysfs exposed value
- * is correct.
+ * Helper function for low-level device drivers to check and (re) allocate and
+ * initialize a disk request queue zone bitmaps. This functions should normally
+ * be called within the disk ->revalidate method for blk-mq based drivers.
+ * Before calling this function, the device driver must already have set the
+ * device zone size (chunk_sector limit) and the max zone append limit.
+ * For BIO based drivers, this function cannot be used. BIO based device drivers
+ * only need to set disk->nr_zones so that the sysfs exposed value is correct.
  * If the @update_driver_data callback function is not NULL, the callback is
  * executed with the device request queue frozen after all zones have been
  * checked.
@@ -539,9 +536,9 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 			      void (*update_driver_data)(struct gendisk *disk))
 {
 	struct request_queue *q = disk->queue;
-	struct blk_revalidate_zone_args args = {
-		.disk		= disk,
-	};
+	sector_t zone_sectors = q->limits.chunk_sectors;
+	sector_t capacity = get_capacity(disk);
+	struct blk_revalidate_zone_args args = { };
 	unsigned int noio_flag;
 	int ret;
 
@@ -550,13 +547,31 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 	if (WARN_ON_ONCE(!queue_is_mq(q)))
 		return -EIO;
 
-	if (!get_capacity(disk))
-		return -EIO;
+	if (!capacity)
+		return -ENODEV;
+
+	/*
+	 * Checks that the device driver indicated a valid zone size and that
+	 * the max zone append limit is set.
+	 */
+	if (!zone_sectors || !is_power_of_2(zone_sectors)) {
+		pr_warn("%s: Invalid non power of two zone size (%llu)\n",
+			disk->disk_name, zone_sectors);
+		return -ENODEV;
+	}
+
+	if (!q->limits.max_zone_append_sectors) {
+		pr_warn("%s: Invalid 0 maximum zone append limit\n",
+			disk->disk_name);
+		return -ENODEV;
+	}
 
 	/*
 	 * Ensure that all memory allocations in this context are done as if
 	 * GFP_NOIO was specified.
 	 */
+	args.disk = disk;
+	args.nr_zones = (capacity + zone_sectors - 1) >> ilog2(zone_sectors);
 	noio_flag = memalloc_noio_save();
 	ret = disk->fops->report_zones(disk, 0, UINT_MAX,
 				       blk_revalidate_zone_cb, &args);
@@ -570,7 +585,7 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 	 * If zones where reported, make sure that the entire disk capacity
 	 * has been checked.
 	 */
-	if (ret > 0 && args.sector != get_capacity(disk)) {
+	if (ret > 0 && args.sector != capacity) {
 		pr_warn("%s: Missing zones from sector %llu\n",
 			disk->disk_name, args.sector);
 		ret = -ENODEV;
@@ -583,7 +598,6 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 	 */
 	blk_mq_freeze_queue(q);
 	if (ret > 0) {
-		blk_queue_chunk_sectors(q, args.zone_sectors);
 		disk->nr_zones = args.nr_zones;
 		swap(disk->seq_zones_wlock, args.seq_zones_wlock);
 		swap(disk->conv_zones_bitmap, args.conv_zones_bitmap);
diff --git a/drivers/block/null_blk/zoned.c b/drivers/block/null_blk/zoned.c
index 635ce0648133dd..55c5b48bc276fe 100644
--- a/drivers/block/null_blk/zoned.c
+++ b/drivers/block/null_blk/zoned.c
@@ -162,21 +162,15 @@ int null_register_zoned_dev(struct nullb *nullb)
 	disk_set_zoned(nullb->disk, BLK_ZONED_HM);
 	blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
 	blk_queue_required_elevator_features(q, ELEVATOR_F_ZBD_SEQ_WRITE);
-
-	if (queue_is_mq(q)) {
-		int ret = blk_revalidate_disk_zones(nullb->disk, NULL);
-
-		if (ret)
-			return ret;
-	} else {
-		blk_queue_chunk_sectors(q, dev->zone_size_sects);
-		nullb->disk->nr_zones = bdev_nr_zones(nullb->disk->part0);
-	}
-
+	blk_queue_chunk_sectors(q, dev->zone_size_sects);
+	nullb->disk->nr_zones = bdev_nr_zones(nullb->disk->part0);
 	blk_queue_max_zone_append_sectors(q, dev->zone_size_sects);
 	disk_set_max_open_zones(nullb->disk, dev->zone_max_open);
 	disk_set_max_active_zones(nullb->disk, dev->zone_max_active);
 
+	if (queue_is_mq(q))
+		return blk_revalidate_disk_zones(nullb->disk, NULL);
+
 	return 0;
 }
 
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index b47358da92a231..1fe011676d070e 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -751,7 +751,6 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev,
 {
 	u32 v, wg;
 	u8 model;
-	int ret;
 
 	virtio_cread(vdev, struct virtio_blk_config,
 		     zoned.model, &model);
@@ -806,6 +805,7 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev,
 			vblk->zone_sectors);
 		return -ENODEV;
 	}
+	blk_queue_chunk_sectors(q, vblk->zone_sectors);
 	dev_dbg(&vdev->dev, "zone sectors = %u\n", vblk->zone_sectors);
 
 	if (virtio_has_feature(vdev, VIRTIO_BLK_F_DISCARD)) {
@@ -814,26 +814,22 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev,
 		blk_queue_max_discard_sectors(q, 0);
 	}
 
-	ret = blk_revalidate_disk_zones(vblk->disk, NULL);
-	if (!ret) {
-		virtio_cread(vdev, struct virtio_blk_config,
-			     zoned.max_append_sectors, &v);
-		if (!v) {
-			dev_warn(&vdev->dev, "zero max_append_sectors reported\n");
-			return -ENODEV;
-		}
-		if ((v << SECTOR_SHIFT) < wg) {
-			dev_err(&vdev->dev,
-				"write granularity %u exceeds max_append_sectors %u limit\n",
-				wg, v);
-			return -ENODEV;
-		}
-
-		blk_queue_max_zone_append_sectors(q, v);
-		dev_dbg(&vdev->dev, "max append sectors = %u\n", v);
+	virtio_cread(vdev, struct virtio_blk_config,
+		     zoned.max_append_sectors, &v);
+	if (!v) {
+		dev_warn(&vdev->dev, "zero max_append_sectors reported\n");
+		return -ENODEV;
+	}
+	if ((v << SECTOR_SHIFT) < wg) {
+		dev_err(&vdev->dev,
+			"write granularity %u exceeds max_append_sectors %u limit\n",
+			wg, v);
+		return -ENODEV;
 	}
+	blk_queue_max_zone_append_sectors(q, v);
+	dev_dbg(&vdev->dev, "max append sectors = %u\n", v);
 
-	return ret;
+	return blk_revalidate_disk_zones(vblk->disk, NULL);
 }
 
 #else
diff --git a/drivers/nvme/host/zns.c b/drivers/nvme/host/zns.c
index 12316ab51bda66..ec8557810c2102 100644
--- a/drivers/nvme/host/zns.c
+++ b/drivers/nvme/host/zns.c
@@ -10,12 +10,11 @@
 int nvme_revalidate_zones(struct nvme_ns *ns)
 {
 	struct request_queue *q = ns->queue;
-	int ret;
 
-	ret = blk_revalidate_disk_zones(ns->disk, NULL);
-	if (!ret)
-		blk_queue_max_zone_append_sectors(q, ns->ctrl->max_zone_append);
-	return ret;
+	blk_queue_chunk_sectors(q, ns->zsze);
+	blk_queue_max_zone_append_sectors(q, ns->ctrl->max_zone_append);
+
+	return blk_revalidate_disk_zones(ns->disk, NULL);
 }
 
 static int nvme_set_max_append(struct nvme_ctrl *ctrl)
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index f21307537829ba..4f0d0e55f0d461 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -534,8 +534,7 @@ static void zfcp_fc_adisc_handler(void *data)
 
 	/* re-init to undo drop from zfcp_fc_adisc() */
 	port->d_id = ntoh24(adisc_resp->adisc_port_id);
-	/* port is good, unblock rport without going through erp */
-	zfcp_scsi_schedule_rport_register(port);
+	/* port is still good, nothing to do */
  out:
 	atomic_andnot(ZFCP_STATUS_PORT_LINK_TEST, &port->status);
 	put_device(&port->dev);
@@ -595,9 +594,6 @@ void zfcp_fc_link_test_work(struct work_struct *work)
 	int retval;
 
 	set_worker_desc("zadisc%16llx", port->wwpn); /* < WORKER_DESC_LEN=24 */
-	get_device(&port->dev);
-	port->rport_task = RPORT_DEL;
-	zfcp_scsi_rport_work(&port->rport_work);
 
 	/* only issue one test command at one time per port */
 	if (atomic_read(&port->status) & ZFCP_STATUS_PORT_LINK_TEST)
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index e1e4f9d1088798..857be0f3ae5b98 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -1598,7 +1598,7 @@ NCR_700_intr(int irq, void *dev_id)
 				printk("scsi%d (%d:%d) PHASE MISMATCH IN SEND MESSAGE %d remain, return %p[%04x], phase %s\n", host->host_no, pun, lun, count, (void *)temp, temp - hostdata->pScript, sbcl_to_string(NCR_700_readb(host, SBCL_REG)));
 #endif
 				resume_offset = hostdata->pScript + Ent_SendMessagePhaseMismatch;
-			} else if(dsp >= to32bit(&slot->pSG[0].ins) &&
+			} else if (slot && dsp >= to32bit(&slot->pSG[0].ins) &&
 				  dsp <= to32bit(&slot->pSG[NCR_700_SG_SEGMENTS].ins)) {
 				int data_transfer = NCR_700_readl(host, DBC_REG) & 0xffffff;
 				int SGcount = (dsp - to32bit(&slot->pSG[0].ins))/sizeof(struct NCR_700_SG_List);
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 7c6efde75da664..73b6ac0c01f549 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -2618,7 +2618,7 @@ struct aac_hba_info {
 struct aac_aifcmd {
 	__le32 command;		/* Tell host what type of notify this is */
 	__le32 seqnum;		/* To allow ordering of reports (if necessary) */
-	u8 data[1];		/* Undefined length (from kernel viewpoint) */
+	u8 data[];		/* Undefined length (from kernel viewpoint) */
 };
 
 /**
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
index d82de34f6fd73f..e51e92f932fa8b 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -27,7 +27,7 @@
 
 #define DRV_NAME		"fnic"
 #define DRV_DESCRIPTION		"Cisco FCoE HBA Driver"
-#define DRV_VERSION		"1.6.0.54"
+#define DRV_VERSION		"1.6.0.55"
 #define PFX			DRV_NAME ": "
 #define DFX                     DRV_NAME "%d: "
 
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 26dbd347156ef9..be89ce96df46c8 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -2139,7 +2139,7 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
 				     bool new_sc)
 
 {
-	int ret = SUCCESS;
+	int ret = 0;
 	struct fnic_pending_aborts_iter_data iter_data = {
 		.fnic = fnic,
 		.lun_dev = lr_sc->device,
@@ -2159,9 +2159,11 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
 
 	/* walk again to check, if IOs are still pending in fw */
 	if (fnic_is_abts_pending(fnic, lr_sc))
-		ret = FAILED;
+		ret = 1;
 
 clean_pending_aborts_end:
+	FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
+			"%s: exit status: %d\n", __func__, ret);
 	return ret;
 }
 
diff --git a/drivers/scsi/fnic/fnic_trace.c b/drivers/scsi/fnic/fnic_trace.c
index f3c3a26a1384db..be0d7c57b242b2 100644
--- a/drivers/scsi/fnic/fnic_trace.c
+++ b/drivers/scsi/fnic/fnic_trace.c
@@ -465,7 +465,7 @@ int fnic_trace_buf_init(void)
 	fnic_max_trace_entries = (trace_max_pages * PAGE_SIZE)/
 					  FNIC_ENTRY_SIZE_BYTES;
 
-	fnic_trace_buf_p = (unsigned long)vzalloc(trace_max_pages * PAGE_SIZE);
+	fnic_trace_buf_p = (unsigned long)vcalloc(trace_max_pages, PAGE_SIZE);
 	if (!fnic_trace_buf_p) {
 		printk(KERN_ERR PFX "Failed to allocate memory "
 				  "for fnic_trace_buf_p\n");
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 467c255bbe4c3e..51afb60859ebf9 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -6971,7 +6971,9 @@ lpfc_unregister_fcf_rescan(struct lpfc_hba *phba)
 	if (rc)
 		return;
 	/* Reset HBA FCF states after successful unregister FCF */
+	spin_lock_irq(&phba->hbalock);
 	phba->fcf.fcf_flag = 0;
+	spin_unlock_irq(&phba->hbalock);
 	phba->fcf.current_rec.flag = 0;
 
 	/*
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index a62e091894f6e5..d26941b131fdb8 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -109,8 +109,6 @@ lpfc_sli4_set_rsp_sgl_last(struct lpfc_hba *phba,
 	}
 }
 
-#define LPFC_INVALID_REFTAG ((u32)-1)
-
 /**
  * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread
  * @phba: The Hba for which this call is being executed.
@@ -978,8 +976,6 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 
 	sgpe = scsi_prot_sglist(sc);
 	lba = scsi_prot_ref_tag(sc);
-	if (lba == LPFC_INVALID_REFTAG)
-		return 0;
 
 	/* First check if we need to match the LBA */
 	if (phba->lpfc_injerr_lba != LPFC_INJERR_LBA_OFF) {
@@ -1560,8 +1556,6 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 
 	/* extract some info from the scsi command for pde*/
 	reftag = scsi_prot_ref_tag(sc);
-	if (reftag == LPFC_INVALID_REFTAG)
-		goto out;
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
@@ -1723,8 +1717,6 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	/* extract some info from the scsi command */
 	blksize = scsi_prot_interval(sc);
 	reftag = scsi_prot_ref_tag(sc);
-	if (reftag == LPFC_INVALID_REFTAG)
-		goto out;
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
@@ -1953,8 +1945,6 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 
 	/* extract some info from the scsi command for pde*/
 	reftag = scsi_prot_ref_tag(sc);
-	if (reftag == LPFC_INVALID_REFTAG)
-		goto out;
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
@@ -2154,8 +2144,6 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	/* extract some info from the scsi command */
 	blksize = scsi_prot_interval(sc);
 	reftag = scsi_prot_ref_tag(sc);
-	if (reftag == LPFC_INVALID_REFTAG)
-		goto out;
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
@@ -2746,8 +2734,6 @@ lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd)
 
 		src = (struct scsi_dif_tuple *)sg_virt(sgpe);
 		start_ref_tag = scsi_prot_ref_tag(cmd);
-		if (start_ref_tag == LPFC_INVALID_REFTAG)
-			goto out;
 		start_app_tag = src->app_tag;
 		len = sgpe->length;
 		while (src && protsegcnt) {
@@ -3493,11 +3479,11 @@ err:
 			     scsi_cmnd->sc_data_direction);
 
 	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
-			"9084 Cannot setup S/G List for HBA"
-			"IO segs %d/%d SGL %d SCSI %d: %d %d\n",
+			"9084 Cannot setup S/G List for HBA "
+			"IO segs %d/%d SGL %d SCSI %d: %d %d %d\n",
 			lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt,
 			phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt,
-			prot_group_type, num_sge);
+			prot_group_type, num_sge, ret);
 
 	lpfc_cmd->seg_cnt = 0;
 	lpfc_cmd->prot_seg_cnt = 0;
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 8ed3bb1f698afa..5e5ce1e74c3b05 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -1178,7 +1178,8 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
 		pm80xx_set_thermal_config(pm8001_ha);
 	}
 
-	if (pm8001_init_sas_add(pm8001_ha))
+	rc = pm8001_init_sas_add(pm8001_ha);
+	if (rc)
 		goto err_out_shost;
 	/* phy setting support for motherboard controller */
 	rc = pm8001_configure_phy_settings(pm8001_ha);
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 2a31ddc99dde5b..7825765c936cd6 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -31,6 +31,7 @@ static void qedf_remove(struct pci_dev *pdev);
 static void qedf_shutdown(struct pci_dev *pdev);
 static void qedf_schedule_recovery_handler(void *dev);
 static void qedf_recovery_handler(struct work_struct *work);
+static int qedf_suspend(struct pci_dev *pdev, pm_message_t state);
 
 /*
  * Driver module parameters.
@@ -3271,6 +3272,7 @@ static struct pci_driver qedf_pci_driver = {
 	.probe = qedf_probe,
 	.remove = qedf_remove,
 	.shutdown = qedf_shutdown,
+	.suspend = qedf_suspend,
 };
 
 static int __qedf_probe(struct pci_dev *pdev, int mode)
@@ -4000,6 +4002,22 @@ static void qedf_shutdown(struct pci_dev *pdev)
 	__qedf_remove(pdev, QEDF_MODE_NORMAL);
 }
 
+static int qedf_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct qedf_ctx *qedf;
+
+	if (!pdev) {
+		QEDF_ERR(NULL, "pdev is NULL.\n");
+		return -ENODEV;
+	}
+
+	qedf = pci_get_drvdata(pdev);
+
+	QEDF_ERR(&qedf->dbg_ctx, "%s: Device does not support suspend operation\n", __func__);
+
+	return -EPERM;
+}
+
 /*
  * Recovery handler code
  */
diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c
index 450522b204d62b..cd0180b1f5b9da 100644
--- a/drivers/scsi/qedi/qedi_main.c
+++ b/drivers/scsi/qedi/qedi_main.c
@@ -69,6 +69,7 @@ static struct nvm_iscsi_block *qedi_get_nvram_block(struct qedi_ctx *qedi);
 static void qedi_recovery_handler(struct work_struct *work);
 static void qedi_schedule_hw_err_handler(void *dev,
 					 enum qed_hw_err_type err_type);
+static int qedi_suspend(struct pci_dev *pdev, pm_message_t state);
 
 static int qedi_iscsi_event_cb(void *context, u8 fw_event_code, void *fw_handle)
 {
@@ -1976,8 +1977,9 @@ static int qedi_cpu_offline(unsigned int cpu)
 	struct qedi_percpu_s *p = this_cpu_ptr(&qedi_percpu);
 	struct qedi_work *work, *tmp;
 	struct task_struct *thread;
+	unsigned long flags;
 
-	spin_lock_bh(&p->p_work_lock);
+	spin_lock_irqsave(&p->p_work_lock, flags);
 	thread = p->iothread;
 	p->iothread = NULL;
 
@@ -1988,7 +1990,7 @@ static int qedi_cpu_offline(unsigned int cpu)
 			kfree(work);
 	}
 
-	spin_unlock_bh(&p->p_work_lock);
+	spin_unlock_irqrestore(&p->p_work_lock, flags);
 	if (thread)
 		kthread_stop(thread);
 	return 0;
@@ -2510,6 +2512,22 @@ static void qedi_shutdown(struct pci_dev *pdev)
 	__qedi_remove(pdev, QEDI_MODE_SHUTDOWN);
 }
 
+static int qedi_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct qedi_ctx *qedi;
+
+	if (!pdev) {
+		QEDI_ERR(NULL, "pdev is NULL.\n");
+		return -ENODEV;
+	}
+
+	qedi = pci_get_drvdata(pdev);
+
+	QEDI_ERR(&qedi->dbg_ctx, "%s: Device does not support suspend operation\n", __func__);
+
+	return -EPERM;
+}
+
 static int __qedi_probe(struct pci_dev *pdev, int mode)
 {
 	struct qedi_ctx *qedi;
@@ -2868,6 +2886,7 @@ static struct pci_driver qedi_pci_driver = {
 	.remove = qedi_remove,
 	.shutdown = qedi_shutdown,
 	.err_handler = &qedi_err_handler,
+	.suspend = qedi_suspend,
 };
 
 static int __init qedi_init(void)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index b3b1df34afd3ab..336b8c665cb430 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -4459,7 +4459,6 @@ struct qla_hw_data {
 
 	/* n2n */
 	struct fc_els_flogi plogi_els_payld;
-#define LOGIN_TEMPLATE_SIZE (sizeof(struct fc_els_flogi) - 4)
 
 	void            *swl;
 
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 059175f2c8f52d..df623de8925503 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -8487,7 +8487,7 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,
 		ql_dbg(ql_dbg_init, vha, 0x0163,
 		    "-> fwdt%u template allocate template %#x words...\n",
 		    j, risc_size);
-		fwdt->template = vmalloc(risc_size * sizeof(*dcode));
+		fwdt->template = vmalloc_array(risc_size, sizeof(*dcode));
 		if (!fwdt->template) {
 			ql_log(ql_log_warn, vha, 0x0164,
 			    "-> fwdt%u failed allocate template.\n", j);
@@ -8742,7 +8742,7 @@ qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 		ql_dbg(ql_dbg_init, vha, 0x0173,
 		    "-> fwdt%u template allocate template %#x words...\n",
 		    j, risc_size);
-		fwdt->template = vmalloc(risc_size * sizeof(*dcode));
+		fwdt->template = vmalloc_array(risc_size, sizeof(*dcode));
 		if (!fwdt->template) {
 			ql_log(ql_log_warn, vha, 0x0174,
 			    "-> fwdt%u failed allocate template.\n", j);
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 1c6e300ed3abbf..1ee9b7d5fc15e1 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -3073,7 +3073,8 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *vha, int els_opcode,
 	memset(ptr, 0, sizeof(struct els_plogi_payload));
 	memset(resp_ptr, 0, sizeof(struct els_plogi_payload));
 	memcpy(elsio->u.els_plogi.els_plogi_pyld->data,
-	    &ha->plogi_els_payld.fl_csp, LOGIN_TEMPLATE_SIZE);
+	       (void *)&ha->plogi_els_payld + offsetof(struct fc_els_flogi, fl_csp),
+	       sizeof(ha->plogi_els_payld) - offsetof(struct fc_els_flogi, fl_csp));
 
 	elsio->u.els_plogi.els_cmd = els_opcode;
 	elsio->u.els_plogi.els_plogi_pyld->opcode = els_opcode;
@@ -3912,7 +3913,7 @@ qla2x00_start_sp(srb_t *sp)
 
 	pkt = __qla2x00_alloc_iocbs(sp->qpair, sp);
 	if (!pkt) {
-		rval = EAGAIN;
+		rval = -EAGAIN;
 		ql_log(ql_log_warn, vha, 0x700c,
 		    "qla2x00_alloc_iocbs failed.\n");
 		goto done;
diff --git a/drivers/scsi/raid_class.c b/drivers/scsi/raid_class.c
index 898a0bdf8df670..95a86e0dfd77a8 100644
--- a/drivers/scsi/raid_class.c
+++ b/drivers/scsi/raid_class.c
@@ -209,53 +209,6 @@ raid_attr_ro_state(level);
 raid_attr_ro_fn(resync);
 raid_attr_ro_state_fn(state);
 
-static void raid_component_release(struct device *dev)
-{
-	struct raid_component *rc =
-		container_of(dev, struct raid_component, dev);
-	dev_printk(KERN_ERR, rc->dev.parent, "COMPONENT RELEASE\n");
-	put_device(rc->dev.parent);
-	kfree(rc);
-}
-
-int raid_component_add(struct raid_template *r,struct device *raid_dev,
-		       struct device *component_dev)
-{
-	struct device *cdev =
-		attribute_container_find_class_device(&r->raid_attrs.ac,
-						      raid_dev);
-	struct raid_component *rc;
-	struct raid_data *rd = dev_get_drvdata(cdev);
-	int err;
-
-	rc = kzalloc(sizeof(*rc), GFP_KERNEL);
-	if (!rc)
-		return -ENOMEM;
-
-	INIT_LIST_HEAD(&rc->node);
-	device_initialize(&rc->dev);
-	rc->dev.release = raid_component_release;
-	rc->dev.parent = get_device(component_dev);
-	rc->num = rd->component_count++;
-
-	dev_set_name(&rc->dev, "component-%d", rc->num);
-	list_add_tail(&rc->node, &rd->component_list);
-	rc->dev.class = &raid_class.class;
-	err = device_add(&rc->dev);
-	if (err)
-		goto err_out;
-
-	return 0;
-
-err_out:
-	list_del(&rc->node);
-	rd->component_count--;
-	put_device(component_dev);
-	kfree(rc);
-	return err;
-}
-EXPORT_SYMBOL(raid_component_add);
-
 struct raid_template *
 raid_class_attach(struct raid_function_template *ft)
 {
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 8c58128ad32a29..9c0af50501f9ac 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -841,11 +841,6 @@ static int sdeb_zbc_nr_conv = DEF_ZBC_NR_CONV_ZONES;
 static int submit_queues = DEF_SUBMIT_QUEUES;  /* > 1 for multi-queue (mq) */
 static int poll_queues; /* iouring iopoll interface.*/
 
-static DEFINE_RWLOCK(atomic_rw);
-static DEFINE_RWLOCK(atomic_rw2);
-
-static rwlock_t *ramdisk_lck_a[2];
-
 static char sdebug_proc_name[] = MY_NAME;
 static const char *my_name = MY_NAME;
 
@@ -6818,9 +6813,6 @@ static int __init scsi_debug_init(void)
 	int k, ret, hosts_to_add;
 	int idx = -1;
 
-	ramdisk_lck_a[0] = &atomic_rw;
-	ramdisk_lck_a[1] = &atomic_rw2;
-
 	if (sdebug_ndelay >= 1000 * 1000 * 1000) {
 		pr_warn("ndelay must be less than 1 second, ignored\n");
 		sdebug_ndelay = 0;
diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c
index 4a6eb1741be0d2..41f23cd0bfb45d 100644
--- a/drivers/scsi/scsi_proc.c
+++ b/drivers/scsi/scsi_proc.c
@@ -406,7 +406,7 @@ static ssize_t proc_scsi_write(struct file *file, const char __user *buf,
 			       size_t length, loff_t *ppos)
 {
 	int host, channel, id, lun;
-	char *buffer, *p;
+	char *buffer, *end, *p;
 	int err;
 
 	if (!buf || length > PAGE_SIZE)
@@ -421,10 +421,14 @@ static ssize_t proc_scsi_write(struct file *file, const char __user *buf,
 		goto out;
 
 	err = -EINVAL;
-	if (length < PAGE_SIZE)
-		buffer[length] = '\0';
-	else if (buffer[PAGE_SIZE-1])
-		goto out;
+	if (length < PAGE_SIZE) {
+		end = buffer + length;
+		*end = '\0';
+	} else {
+		end = buffer + PAGE_SIZE - 1;
+		if (*end)
+			goto out;
+	}
 
 	/*
 	 * Usage: echo "scsi add-single-device 0 1 2 3" >/proc/scsi/scsi
@@ -433,10 +437,10 @@ static ssize_t proc_scsi_write(struct file *file, const char __user *buf,
 	if (!strncmp("scsi add-single-device", buffer, 22)) {
 		p = buffer + 23;
 
-		host = simple_strtoul(p, &p, 0);
-		channel = simple_strtoul(p + 1, &p, 0);
-		id = simple_strtoul(p + 1, &p, 0);
-		lun = simple_strtoul(p + 1, &p, 0);
+		host    = (p     < end) ? simple_strtoul(p, &p, 0) : 0;
+		channel = (p + 1 < end) ? simple_strtoul(p + 1, &p, 0) : 0;
+		id      = (p + 1 < end) ? simple_strtoul(p + 1, &p, 0) : 0;
+		lun     = (p + 1 < end) ? simple_strtoul(p + 1, &p, 0) : 0;
 
 		err = scsi_add_single_device(host, channel, id, lun);
 
@@ -447,10 +451,10 @@ static ssize_t proc_scsi_write(struct file *file, const char __user *buf,
 	} else if (!strncmp("scsi remove-single-device", buffer, 25)) {
 		p = buffer + 26;
 
-		host = simple_strtoul(p, &p, 0);
-		channel = simple_strtoul(p + 1, &p, 0);
-		id = simple_strtoul(p + 1, &p, 0);
-		lun = simple_strtoul(p + 1, &p, 0);
+		host    = (p     < end) ? simple_strtoul(p, &p, 0) : 0;
+		channel = (p + 1 < end) ? simple_strtoul(p + 1, &p, 0) : 0;
+		id      = (p + 1 < end) ? simple_strtoul(p + 1, &p, 0) : 0;
+		lun     = (p + 1 < end) ? simple_strtoul(p + 1, &p, 0) : 0;
 
 		err = scsi_remove_single_device(host, channel, id, lun);
 	}
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index abbd08933ac76d..a25215507668d8 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -831,7 +831,6 @@ int sd_zbc_revalidate_zones(struct scsi_disk *sdkp)
 	struct request_queue *q = disk->queue;
 	u32 zone_blocks = sdkp->early_zone_info.zone_blocks;
 	unsigned int nr_zones = sdkp->early_zone_info.nr_zones;
-	u32 max_append;
 	int ret = 0;
 	unsigned int flags;
 
@@ -876,6 +875,11 @@ int sd_zbc_revalidate_zones(struct scsi_disk *sdkp)
 		goto unlock;
 	}
 
+	blk_queue_chunk_sectors(q,
+			logical_to_sectors(sdkp->device, zone_blocks));
+	blk_queue_max_zone_append_sectors(q,
+			q->limits.max_segments << PAGE_SECTORS_SHIFT);
+
 	ret = blk_revalidate_disk_zones(disk, sd_zbc_revalidate_zones_cb);
 
 	memalloc_noio_restore(flags);
@@ -888,12 +892,6 @@ int sd_zbc_revalidate_zones(struct scsi_disk *sdkp)
 		goto unlock;
 	}
 
-	max_append = min_t(u32, logical_to_sectors(sdkp->device, zone_blocks),
-			   q->limits.max_segments << PAGE_SECTORS_SHIFT);
-	max_append = min_t(u32, max_append, queue_max_hw_sectors(q));
-
-	blk_queue_max_zone_append_sectors(q, max_append);
-
 	sd_zbc_print_zones(sdkp);
 
 unlock:
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 89fa046c7158a1..0d8afffd1683b1 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1497,9 +1497,10 @@ sg_add_device(struct device *cl_dev)
 	int error;
 	unsigned long iflags;
 
-	error = blk_get_queue(scsidp->request_queue);
-	if (error)
-		return error;
+	if (!blk_get_queue(scsidp->request_queue)) {
+		pr_warn("%s: get scsi_device queue failed\n", __func__);
+		return -ENODEV;
+	}
 
 	error = -ENOMEM;
 	cdev = cdev_alloc();
diff --git a/drivers/scsi/snic/snic_disc.c b/drivers/scsi/snic/snic_disc.c
index 3e2e5783924d03..4db3ba62fcd364 100644
--- a/drivers/scsi/snic/snic_disc.c
+++ b/drivers/scsi/snic/snic_disc.c
@@ -307,7 +307,7 @@ snic_tgt_create(struct snic *snic, struct snic_tgt_id *tgtid)
 		spin_lock_irqsave(snic->shost->host_lock, flags);
 		list_del(&tgt->list);
 		spin_unlock_irqrestore(snic->shost->host_lock, flags);
-		kfree(tgt);
+		put_device(&tgt->dev);
 		tgt = NULL;
 
 		return tgt;
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 659196a2f63ad3..068625556ddacf 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -316,8 +316,12 @@ enum storvsc_request_type {
 #define SRB_STATUS_ABORTED		0x02
 #define SRB_STATUS_ERROR		0x04
 #define SRB_STATUS_INVALID_REQUEST	0x06
+#define SRB_STATUS_TIMEOUT		0x09
+#define SRB_STATUS_SELECTION_TIMEOUT	0x0A
+#define SRB_STATUS_BUS_RESET		0x0E
 #define SRB_STATUS_DATA_OVERRUN		0x12
 #define SRB_STATUS_INVALID_LUN		0x20
+#define SRB_STATUS_INTERNAL_ERROR	0x30
 
 #define SRB_STATUS(status) \
 	(status & ~(SRB_STATUS_AUTOSENSE_VALID | SRB_STATUS_QUEUE_FROZEN))
@@ -365,6 +369,7 @@ static void storvsc_on_channel_callback(void *context);
 #define STORVSC_FC_MAX_LUNS_PER_TARGET			255
 #define STORVSC_FC_MAX_TARGETS				128
 #define STORVSC_FC_MAX_CHANNELS				8
+#define STORVSC_FC_MAX_XFER_SIZE			((u32)(512 * 1024))
 
 #define STORVSC_IDE_MAX_LUNS_PER_TARGET			64
 #define STORVSC_IDE_MAX_TARGETS				1
@@ -978,6 +983,11 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb,
 	case SRB_STATUS_ERROR:
 	case SRB_STATUS_ABORTED:
 	case SRB_STATUS_INVALID_REQUEST:
+	case SRB_STATUS_INTERNAL_ERROR:
+	case SRB_STATUS_TIMEOUT:
+	case SRB_STATUS_SELECTION_TIMEOUT:
+	case SRB_STATUS_BUS_RESET:
+	case SRB_STATUS_DATA_OVERRUN:
 		if (vm_srb->srb_status & SRB_STATUS_AUTOSENSE_VALID) {
 			/* Check for capacity change */
 			if ((asc == 0x2a) && (ascq == 0x9)) {
@@ -1671,10 +1681,6 @@ static int storvsc_host_reset_handler(struct scsi_cmnd *scmnd)
  */
 static enum scsi_timeout_action storvsc_eh_timed_out(struct scsi_cmnd *scmnd)
 {
-#if IS_ENABLED(CONFIG_SCSI_FC_ATTRS)
-	if (scmnd->device->host->transportt == fc_transport_template)
-		return fc_eh_timed_out(scmnd);
-#endif
 	return SCSI_EH_RESET_TIMER;
 }
 
@@ -2004,6 +2010,9 @@ static int storvsc_probe(struct hv_device *device,
 	 * protecting it from any weird value.
 	 */
 	max_xfer_bytes = round_down(stor_device->max_transfer_bytes, HV_HYP_PAGE_SIZE);
+	if (is_fc)
+		max_xfer_bytes = min(max_xfer_bytes, STORVSC_FC_MAX_XFER_SIZE);
+
 	/* max_hw_sectors_kb */
 	host->max_sectors = max_xfer_bytes >> 9;
 	/*
diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c
index 66a4e24484a30c..2ba8ec254dceee 100644
--- a/drivers/ufs/core/ufs-mcq.c
+++ b/drivers/ufs/core/ufs-mcq.c
@@ -578,7 +578,6 @@ static bool ufshcd_mcq_sqe_search(struct ufs_hba *hba,
 {
 	struct ufshcd_lrb *lrbp = &hba->lrb[task_tag];
 	struct utp_transfer_req_desc *utrd;
-	u32 mask = hwq->max_entries - 1;
 	__le64  cmd_desc_base_addr;
 	bool ret = false;
 	u64 addr, match;
@@ -606,7 +605,10 @@ static bool ufshcd_mcq_sqe_search(struct ufs_hba *hba,
 			ret = true;
 			goto out;
 		}
-		sq_head_slot = (sq_head_slot + 1) & mask;
+
+		sq_head_slot++;
+		if (sq_head_slot == hwq->max_entries)
+			sq_head_slot = 0;
 	}
 
 out:
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index b00ec996d04d8f..e4318171381bd9 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -8452,6 +8452,41 @@ out:
 	return ret;
 }
 
+static void ufshcd_set_timestamp_attr(struct ufs_hba *hba)
+{
+	int err;
+	struct ufs_query_req *request = NULL;
+	struct ufs_query_res *response = NULL;
+	struct ufs_dev_info *dev_info = &hba->dev_info;
+	struct utp_upiu_query_v4_0 *upiu_data;
+
+	if (dev_info->wspecversion < 0x400)
+		return;
+
+	ufshcd_hold(hba);
+
+	mutex_lock(&hba->dev_cmd.lock);
+
+	ufshcd_init_query(hba, &request, &response,
+			  UPIU_QUERY_OPCODE_WRITE_ATTR,
+			  QUERY_ATTR_IDN_TIMESTAMP, 0, 0);
+
+	request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST;
+
+	upiu_data = (struct utp_upiu_query_v4_0 *)&request->upiu_req;
+
+	put_unaligned_be64(ktime_get_real_ns(), &upiu_data->osf3);
+
+	err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, QUERY_REQ_TIMEOUT);
+
+	if (err)
+		dev_err(hba->dev, "%s: failed to set timestamp %d\n",
+			__func__, err);
+
+	mutex_unlock(&hba->dev_cmd.lock);
+	ufshcd_release(hba);
+}
+
 /**
  * ufshcd_add_lus - probe and add UFS logical units
  * @hba: per-adapter instance
@@ -8641,6 +8676,8 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)
 	ufshcd_set_ufs_dev_active(hba);
 	ufshcd_force_reset_auto_bkops(hba);
 
+	ufshcd_set_timestamp_attr(hba);
+
 	/* Gear up to HS gear if supported */
 	if (hba->max_pwr_info.is_valid) {
 		/*
@@ -9677,6 +9714,7 @@ static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 		ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE);
 		if (ret)
 			goto set_old_link_state;
+		ufshcd_set_timestamp_attr(hba);
 	}
 
 	if (ufshcd_keep_autobkops_enabled_except_suspend(hba))
diff --git a/drivers/ufs/host/Kconfig b/drivers/ufs/host/Kconfig
index 16624ba08050f0..580c8d0bd8bbd8 100644
--- a/drivers/ufs/host/Kconfig
+++ b/drivers/ufs/host/Kconfig
@@ -72,6 +72,7 @@ config SCSI_UFS_QCOM
 config SCSI_UFS_MEDIATEK
 	tristate "Mediatek specific hooks to UFS controller platform driver"
 	depends on SCSI_UFSHCD_PLATFORM && ARCH_MEDIATEK
+	depends on RESET_CONTROLLER
 	select PHY_MTK_UFS
 	select RESET_TI_SYSCON
 	help
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index f88febb231230e..d1149b1c3ed50e 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -365,7 +365,7 @@ static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host)
 		   ufs_qcom_cap_qunipro(host) ? QUNIPRO_SEL : 0,
 		   REG_UFS_CFG1);
 
-	if (host->hw_ver.major == 0x05)
+	if (host->hw_ver.major >= 0x05)
 		ufshcd_rmwl(host->hba, QUNIPRO_G4_SEL, 0, REG_UFS_CFG0);
 
 	/* make sure above configuration is applied before we return */
diff --git a/drivers/ufs/host/ufs-renesas.c b/drivers/ufs/host/ufs-renesas.c
index 49f7bafc7d5585..cc94970b86c930 100644
--- a/drivers/ufs/host/ufs-renesas.c
+++ b/drivers/ufs/host/ufs-renesas.c
@@ -359,7 +359,7 @@ static int ufs_renesas_init(struct ufs_hba *hba)
 {
 	struct ufs_renesas_priv *priv;
 
-	priv = devm_kmalloc(hba->dev, sizeof(*priv), GFP_KERNEL);
+	priv = devm_kzalloc(hba->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 	ufshcd_set_variant(hba, priv);
diff --git a/include/linux/raid_class.h b/include/linux/raid_class.h
index 6a9b177d5c4149..e50416ba9cd934 100644
--- a/include/linux/raid_class.h
+++ b/include/linux/raid_class.h
@@ -77,7 +77,3 @@ DEFINE_RAID_ATTRIBUTE(enum raid_state, state)
 	
 struct raid_template *raid_class_attach(struct raid_function_template *);
 void raid_class_release(struct raid_template *);
-
-int __must_check raid_component_add(struct raid_template *, struct device *,
-				    struct device *);
-
diff --git a/include/uapi/scsi/scsi_bsg_ufs.h b/include/uapi/scsi/scsi_bsg_ufs.h
index bf1832dc35db90..7c7975f9905e20 100644
--- a/include/uapi/scsi/scsi_bsg_ufs.h
+++ b/include/uapi/scsi/scsi_bsg_ufs.h
@@ -117,6 +117,31 @@ struct utp_upiu_query {
 };
 
 /**
+ * struct utp_upiu_query_v4_0 - upiu request buffer structure for
+ * query request >= UFS 4.0 spec.
+ * @opcode: command to perform B-0
+ * @idn: a value that indicates the particular type of data B-1
+ * @index: Index to further identify data B-2
+ * @selector: Index to further identify data B-3
+ * @osf4: spec field B-5
+ * @osf5: spec field B 6,7
+ * @osf6: spec field DW 8,9
+ * @osf7: spec field DW 10,11
+ */
+struct utp_upiu_query_v4_0 {
+	__u8 opcode;
+	__u8 idn;
+	__u8 index;
+	__u8 selector;
+	__u8 osf3;
+	__u8 osf4;
+	__be16 osf5;
+	__be32 osf6;
+	__be32 osf7;
+	__be32 reserved;
+};
+
+/**
  * struct utp_upiu_cmd - Command UPIU structure
  * @data_transfer_len: Data Transfer Length DW-3
  * @cdb: Command Descriptor Block CDB DW-4 to DW-7
diff --git a/include/ufs/ufs.h b/include/ufs/ufs.h
index 3ebb677d993ac8..0cced88f4531e8 100644
--- a/include/ufs/ufs.h
+++ b/include/ufs/ufs.h
@@ -179,6 +179,7 @@ enum attr_idn {
 	QUERY_ATTR_IDN_WB_BUFF_LIFE_TIME_EST    = 0x1E,
 	QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE        = 0x1F,
 	QUERY_ATTR_IDN_EXT_IID_EN		= 0x2A,
+	QUERY_ATTR_IDN_TIMESTAMP		= 0x30
 };
 
 /* Descriptor idn for Query requests */