Merge remote-tracking branch 'mfd/for-mfd-next' into renesas-driversNotice: this object is not reachable from any branch.

Conflicts:
	drivers/mfd/intel-lpss-pci.c
Notice: this object is not reachable from any branch.

35 files changed, 260 insertions, 374 deletions

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
deleted file mode 100644
index 77ca635765e132..00000000000000
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Altera SOCFPGA SDRAM Controller
-
-Required properties:
-- compatible : Should contain "altr,sdr-ctl" and "syscon".
-  syscon is required by the Altera SOCFPGA SDRAM EDAC.
-- reg : Should contain 1 register range (address and length)
-
-Example:
-	sdr: sdr@ffc25000 {
-		compatible = "altr,sdr-ctl", "syscon";
-		reg = <0xffc25000 0x1000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/apm/scu.txt b/Documentation/devicetree/bindings/arm/apm/scu.txt
deleted file mode 100644
index b45be06625fdd7..00000000000000
--- a/Documentation/devicetree/bindings/arm/apm/scu.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-APM X-GENE SoC series SCU Registers
-
-This system clock unit contain various register that control block resets,
-clock enable/disables, clock divisors and other deepsleep registers.
-
-Properties:
- - compatible : should contain two values. First value must be:
-		   - "apm,xgene-scu"
-		second value must be always "syscon".
-
- - reg : offset and length of the register set.
-
-Example :
-	scu: system-clk-controller@17000000 {
-		compatible = "apm,xgene-scu","syscon";
-		reg = <0x0 0x17000000 0x0 0x400>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
deleted file mode 100644
index 29fa93dad52bac..00000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Power management
-----------------
-
-For power management (particularly DVFS and AVS), the North Bridge
-Power Management component is needed:
-
-Required properties:
-- compatible     : should contain "marvell,armada-3700-nb-pm", "syscon";
-- reg            : the register start and length for the North Bridge
-		    Power Management
-
-Example:
-
-nb_pm: syscon@14000 {
-	compatible = "marvell,armada-3700-nb-pm", "syscon";
-	reg = <0x14000 0x60>;
-}
-
-AVS
----
-
-For AVS an other component is needed:
-
-Required properties:
-- compatible     : should contain "marvell,armada-3700-avs", "syscon";
-- reg            : the register start and length for the AVS
-
-Example:
-avs: avs@11500 {
-	compatible = "marvell,armada-3700-avs", "syscon";
-	reg = <0x11500 0x40>;
-}
diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
deleted file mode 100644
index 6c201a2ba8acfb..00000000000000
--- a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Texas Instruments TWL family (twl4030) pwrbutton module
-
-This module is part of the TWL4030. For more details about the whole
-chip see Documentation/devicetree/bindings/mfd/ti,twl.yaml.
-
-This module provides a simple power button event via an Interrupt.
-
-Required properties:
-- compatible: should be one of the following
-   - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
-- interrupts: should be one of the following
-   - <8>: For controllers compatible with twl4030
-
-Example:
-
-&twl {
-	twl_pwrbutton: pwrbutton {
-		compatible = "ti,twl4030-pwrbutton";
-		interrupts = <8>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt
deleted file mode 100644
index 82f82e069563cf..00000000000000
--- a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Broadcom iProc Chip Device Resource Unit (CDRU)
-
-Various Broadcom iProc SoCs have a set of registers that provide various
-chip specific device and resource configurations. This node allows access to
-these CDRU registers via syscon.
-
-Required properties:
-- compatible: should contain:
-		"brcm,sr-cdru", "syscon" for Stingray
-- reg: base address and range of the CDRU registers
-
-Example:
-	cdru: syscon@6641d000 {
-		compatible = "brcm,sr-cdru", "syscon";
-		reg = <0 0x6641d000 0 0x400>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt
deleted file mode 100644
index 4421e9771b8a2a..00000000000000
--- a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Broadcom iProc Multi Host Bridge (MHB)
-
-Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls
-the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint
-interface; 3) access to the Nitro (network processing) engine
-
-This node allows access to these MHB registers via syscon.
-
-Required properties:
-- compatible: should contain:
-		"brcm,sr-mhb", "syscon" for Stingray
-- reg: base address and range of the MHB registers
-
-Example:
-	mhb: syscon@60401000 {
-		compatible = "brcm,sr-mhb", "syscon";
-		reg = <0 0x60401000 0 0x38c>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
index 11089aa89ec667..07f99738fcf6f1 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
@@ -17,7 +17,12 @@ description: |
 
 properties:
   compatible:
-    const: rohm,bd71828
+    oneOf:
+      - const: rohm,bd71828
+
+      - items:
+          - const: rohm,bd71879
+          - const: rohm,bd71828
 
   reg:
     description:
@@ -73,6 +78,8 @@ properties:
       used to mark the pins which should not be configured for GPIO. Please see
       the ../gpio/gpio.txt for more information.
 
+  system-power-controller: true
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 9d55bee155ce9f..0327e779e3273a 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -38,11 +38,20 @@ properties:
               - allwinner,sun8i-h3-system-controller
               - allwinner,sun8i-v3s-system-controller
               - allwinner,sun50i-a64-system-controller
+              - altr,sdr-ctl
               - amd,pensando-elba-syscon
+              - apm,xgene-csw
+              - apm,xgene-efuse
+              - apm,xgene-mcb
+              - apm,xgene-rb
+              - apm,xgene-scu
               - brcm,cru-clkset
+              - brcm,sr-cdru
+              - brcm,sr-mhb
               - freecom,fsg-cs2-system-controller
               - fsl,imx93-aonmix-ns-syscfg
               - fsl,imx93-wakeupmix-syscfg
+              - fsl,ls1088a-reset
               - hisilicon,dsa-subctrl
               - hisilicon,hi6220-sramctrl
               - hisilicon,pcie-sas-subctrl
@@ -51,9 +60,15 @@ properties:
               - intel,lgm-syscon
               - loongson,ls1b-syscon
               - loongson,ls1c-syscon
+              - marvell,armada-3700-cpu-misc
+              - marvell,armada-3700-nb-pm
+              - marvell,armada-3700-avs
               - marvell,armada-3700-usb2-host-misc
+              - mediatek,mt2712-pctl-a-syscfg
+              - mediatek,mt6397-pctl-pmic-syscfg
               - mediatek,mt8135-pctl-a-syscfg
               - mediatek,mt8135-pctl-b-syscfg
+              - mediatek,mt8173-pctl-a-syscfg
               - mediatek,mt8365-syscfg
               - microchip,lan966x-cpu-syscon
               - microchip,sparx5-cpu-syscon
diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
index 52ed228fb1e7ed..c2357fecb56ccd 100644
--- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
@@ -15,6 +15,67 @@ description: |
   USB transceiver or Audio amplifier.
   These chips are connected to an i2c bus.
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,twl4030
+    then:
+      properties:
+        madc:
+          type: object
+          $ref: /schemas/iio/adc/ti,twl4030-madc.yaml
+          unevaluatedProperties: false
+
+        bci:
+          type: object
+          $ref: /schemas/power/supply/twl4030-charger.yaml
+          unevaluatedProperties: false
+
+        pwrbutton:
+          type: object
+          additionalProperties: false
+          properties:
+            compatible:
+              const: ti,twl4030-pwrbutton
+            interrupts:
+              items:
+                - items:
+                    const: 8
+
+        watchdog:
+          type: object
+          additionalProperties: false
+          properties:
+            compatible:
+              const: ti,twl4030-wdt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,twl6030
+    then:
+      properties:
+        gpadc:
+          type: object
+          properties:
+            compatible:
+              const: ti,twl6030-gpadc
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,twl6032
+    then:
+      properties:
+        gpadc:
+          type: object
+          properties:
+            compatible:
+              const: ti,twl6032-gpadc
+
 properties:
   compatible:
     description:
@@ -42,7 +103,16 @@ properties:
   "#clock-cells":
     const: 1
 
-additionalProperties: false
+  rtc:
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        const: ti,twl4030-rtc
+      interrupts:
+        maxItems: 1
+
+unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/rtc/twl-rtc.txt b/Documentation/devicetree/bindings/rtc/twl-rtc.txt
deleted file mode 100644
index 8f9a94f2f89699..00000000000000
--- a/Documentation/devicetree/bindings/rtc/twl-rtc.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-* Texas Instruments TWL4030/6030 RTC
-
-Required properties:
-- compatible : Should be "ti,twl4030-rtc"
-- interrupts : Should be the interrupt number.
-
-Example:
-	rtc {
-		compatible = "ti,twl4030-rtc";
-		interrupts = <11>;
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt b/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt
deleted file mode 100644
index 80a37193c0b86b..00000000000000
--- a/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Device tree bindings for twl4030-wdt driver (TWL4030 watchdog)
-
-Required properties:
-	compatible = "ti,twl4030-wdt";
-
-Example:
-
-watchdog {
-	compatible = "ti,twl4030-wdt";
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index 50e8d4132f6d5c..960d390f5ea578 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22406,7 +22406,7 @@ L:	linux-renesas-soc@vger.kernel.org
 S:	Supported
 F:	drivers/mmc/host/renesas_sdhi*
 F:	drivers/mmc/host/tmio_mmc*
-F:	include/linux/mfd/tmio.h
+F:	include/linux/platform_data/tmio.h
 
 TMP513 HARDWARE MONITOR DRIVER
 M:	Eric Tremblay <etremblay@distech-controls.com>
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index f39c8196efdfd1..4014c042d2a5a5 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -14,9 +14,9 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/io.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/sh_mmcif.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/sh_eth.h>
 #include <linux/sh_intc.h>
 #include <linux/usb/renesas_usbhs.h>
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 645cccf3da88ec..bb5004a8ac0250 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -24,10 +24,10 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/sh_flctl.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 30d117f9ad7eea..6f13557eecd6bb 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -17,13 +17,13 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/interrupt.h>
 #include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/sh_mmcif.h>
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
 #include <linux/platform_data/gpio_backlight.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_data/tsc2007.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 6b775eae85c021..70236859919dbf 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -22,10 +22,10 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/interrupt.h>
 #include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_data/lv5207lp.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 773ee767d0c4e0..1853e6319a660f 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -7,6 +7,7 @@
 #include <linux/clkdev.h>
 #include <linux/dma-map-ops.h>
 #include <linux/init.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
@@ -14,7 +15,6 @@
 #include <linux/memblock.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mtd/platnand.h>
 #include <linux/i2c.h>
 #include <linux/regulator/fixed.h>
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 787ddd3c627a1d..e500feb9105393 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -21,9 +21,9 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/interrupt.h>
 #include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
diff --git a/drivers/fpga/intel-m10-bmc-sec-update.c b/drivers/fpga/intel-m10-bmc-sec-update.c
index 89851b1337097c..7ac9f9f5af129b 100644
--- a/drivers/fpga/intel-m10-bmc-sec-update.c
+++ b/drivers/fpga/intel-m10-bmc-sec-update.c
@@ -529,11 +529,12 @@ static enum fw_upload_err m10bmc_sec_prepare(struct fw_upload *fwl,
 					     const u8 *data, u32 size)
 {
 	struct m10bmc_sec *sec = fwl->dd_handle;
+	const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
 	u32 ret;
 
 	sec->cancel_request = false;
 
-	if (!size || size > M10BMC_STAGING_SIZE)
+	if (!size || size > csr_map->staging_size)
 		return FW_UPLOAD_ERR_INVALID_SIZE;
 
 	if (sec->m10bmc->flash_bulk_ops)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 4b023ee229cf1c..00fd388a920528 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -292,7 +292,7 @@ config MFD_MADERA_SPI
 
 config MFD_MAX5970
 	tristate "Maxim 5970/5978 power switch and monitor"
-	depends on (I2C && OF)
+	depends on I2C && OF
 	select MFD_SIMPLE_MFD_I2C
 	help
 	  This driver controls a Maxim 5970/5978 switch via I2C bus.
@@ -458,7 +458,7 @@ config MFD_EXYNOS_LPASS
 
 config MFD_GATEWORKS_GSC
 	tristate "Gateworks System Controller"
-	depends on (I2C && OF)
+	depends on I2C && OF
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -473,7 +473,7 @@ config MFD_GATEWORKS_GSC
 
 config MFD_MC13XXX
 	tristate
-	depends on (SPI_MASTER || I2C)
+	depends on SPI_MASTER || I2C
 	select MFD_CORE
 	select REGMAP_IRQ
 	help
@@ -1109,7 +1109,7 @@ config PCF50633_GPIO
 
 config MFD_PM8XXX
 	tristate "Qualcomm PM8xxx PMIC chips driver"
-	depends on (ARM || HEXAGON || COMPILE_TEST)
+	depends on ARM || HEXAGON || COMPILE_TEST
 	select IRQ_DOMAIN_HIERARCHY
 	select MFD_CORE
 	select REGMAP
@@ -1418,7 +1418,7 @@ config MFD_DB8500_PRCMU
 
 config MFD_STMPE
 	bool "STMicroelectronics STMPE"
-	depends on (I2C=y || SPI_MASTER=y)
+	depends on I2C=y || SPI_MASTER=y
 	depends on OF
 	select MFD_CORE
 	help
@@ -2116,7 +2116,7 @@ config MFD_STM32_TIMERS
 
 config MFD_STPMIC1
 	tristate "Support for STPMIC1 PMIC"
-	depends on (I2C=y && OF)
+	depends on I2C=y && OF
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	select MFD_CORE
diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c
index 9f4782bdbf4b6f..c36a101df7becb 100644
--- a/drivers/mfd/intel-lpss-pci.c
+++ b/drivers/mfd/intel-lpss-pci.c
@@ -54,7 +54,7 @@ static int intel_lpss_pci_probe(struct pci_dev *pdev,
 	if (ret)
 		return ret;
 
-	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_INTX);
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/mfd/intel-m10-bmc-pmci.c b/drivers/mfd/intel-m10-bmc-pmci.c
index 0392ef8b57d860..698c5933938b79 100644
--- a/drivers/mfd/intel-m10-bmc-pmci.c
+++ b/drivers/mfd/intel-m10-bmc-pmci.c
@@ -370,6 +370,7 @@ static const struct m10bmc_csr_map m10bmc_n6000_csr_map = {
 	.pr_reh_addr = M10BMC_N6000_PR_REH_ADDR,
 	.pr_magic = M10BMC_N6000_PR_PROG_MAGIC,
 	.rsu_update_counter = M10BMC_N6000_STAGING_FLASH_COUNT,
+	.staging_size = M10BMC_STAGING_SIZE,
 };
 
 static const struct intel_m10bmc_platform_info m10bmc_pmci_n6000 = {
diff --git a/drivers/mfd/intel-m10-bmc-spi.c b/drivers/mfd/intel-m10-bmc-spi.c
index cbeb7de9e04160..d64d28199df656 100644
--- a/drivers/mfd/intel-m10-bmc-spi.c
+++ b/drivers/mfd/intel-m10-bmc-spi.c
@@ -109,6 +109,7 @@ static const struct m10bmc_csr_map m10bmc_n3000_csr_map = {
 	.pr_reh_addr = M10BMC_N3000_PR_REH_ADDR,
 	.pr_magic = M10BMC_N3000_PR_PROG_MAGIC,
 	.rsu_update_counter = M10BMC_N3000_STAGING_FLASH_COUNT,
+	.staging_size = M10BMC_STAGING_SIZE,
 };
 
 static struct mfd_cell m10bmc_d5005_subdevs[] = {
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index 5557f023a17342..ce7d52a62e5110 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -6,14 +6,17 @@
  * Author: Michael Brunner <michael.brunner@kontron.com>
  */
 
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/kempld.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
+#include <linux/property.h>
 #include <linux/dmi.h>
 #include <linux/io.h>
 #include <linux/delay.h>
-#include <linux/acpi.h>
+#include <linux/sysfs.h>
 
 #define MAX_ID_LEN 4
 static char force_device_id[MAX_ID_LEN + 1] = "";
@@ -106,7 +109,7 @@ static int kempld_register_cells_generic(struct kempld_device_data *pld)
 	if (pld->feature_mask & KEMPLD_FEATURE_MASK_UART)
 		devs[i++].name = kempld_dev_names[KEMPLD_UART];
 
-	return mfd_add_devices(pld->dev, -1, devs, i, NULL, 0, NULL);
+	return mfd_add_devices(pld->dev, PLATFORM_DEVID_NONE, devs, i, NULL, 0, NULL);
 }
 
 static struct resource kempld_ioresource = {
@@ -129,28 +132,20 @@ static struct platform_device *kempld_pdev;
 static int kempld_create_platform_device(const struct dmi_system_id *id)
 {
 	const struct kempld_platform_data *pdata = id->driver_data;
-	int ret;
-
-	kempld_pdev = platform_device_alloc("kempld", -1);
-	if (!kempld_pdev)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(kempld_pdev, pdata, sizeof(*pdata));
-	if (ret)
-		goto err;
-
-	ret = platform_device_add_resources(kempld_pdev, pdata->ioresource, 1);
-	if (ret)
-		goto err;
-
-	ret = platform_device_add(kempld_pdev);
-	if (ret)
-		goto err;
+	const struct platform_device_info pdevinfo = {
+		.name = "kempld",
+		.id = PLATFORM_DEVID_NONE,
+		.res = pdata->ioresource,
+		.num_res = 1,
+		.data = pdata,
+		.size_data = sizeof(*pdata),
+	};
+
+	kempld_pdev = platform_device_register_full(&pdevinfo);
+	if (IS_ERR(kempld_pdev))
+		return PTR_ERR(kempld_pdev);
 
 	return 0;
-err:
-	platform_device_put(kempld_pdev);
-	return ret;
 }
 
 /**
@@ -299,11 +294,8 @@ static int kempld_get_info(struct kempld_device_data *pld)
 	else
 		minor = (pld->info.minor - 10) + 'A';
 
-	ret = scnprintf(pld->info.version, sizeof(pld->info.version),
-			"P%X%c%c.%04X", pld->info.number, major, minor,
-			pld->info.buildnr);
-	if (ret < 0)
-		return ret;
+	scnprintf(pld->info.version, sizeof(pld->info.version), "P%X%c%c.%04X",
+		  pld->info.number, major, minor, pld->info.buildnr);
 
 	return 0;
 }
@@ -372,16 +364,13 @@ static DEVICE_ATTR_RO(pld_version);
 static DEVICE_ATTR_RO(pld_specification);
 static DEVICE_ATTR_RO(pld_type);
 
-static struct attribute *pld_attributes[] = {
+static struct attribute *pld_attrs[] = {
 	&dev_attr_pld_version.attr,
 	&dev_attr_pld_specification.attr,
 	&dev_attr_pld_type.attr,
 	NULL
 };
-
-static const struct attribute_group pld_attr_group = {
-	.attrs = pld_attributes,
-};
+ATTRIBUTE_GROUPS(pld);
 
 static int kempld_detect_device(struct kempld_device_data *pld)
 {
@@ -414,36 +403,8 @@ static int kempld_detect_device(struct kempld_device_data *pld)
 		 pld->info.version, kempld_get_type_string(pld),
 		 pld->info.spec_major, pld->info.spec_minor);
 
-	ret = sysfs_create_group(&pld->dev->kobj, &pld_attr_group);
-	if (ret)
-		return ret;
-
-	ret = kempld_register_cells(pld);
-	if (ret)
-		sysfs_remove_group(&pld->dev->kobj, &pld_attr_group);
-
-	return ret;
-}
-
-#ifdef CONFIG_ACPI
-static int kempld_get_acpi_data(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	const struct kempld_platform_data *pdata;
-	int ret;
-
-	pdata = acpi_device_get_match_data(dev);
-	ret = platform_device_add_data(pdev, pdata,
-				       sizeof(struct kempld_platform_data));
-
-	return ret;
-}
-#else
-static int kempld_get_acpi_data(struct platform_device *pdev)
-{
-	return -ENODEV;
+	return kempld_register_cells(pld);
 }
-#endif /* CONFIG_ACPI */
 
 static int kempld_probe(struct platform_device *pdev)
 {
@@ -453,15 +414,21 @@ static int kempld_probe(struct platform_device *pdev)
 	struct resource *ioport;
 	int ret;
 
-	if (kempld_pdev == NULL) {
+	if (IS_ERR_OR_NULL(kempld_pdev)) {
 		/*
 		 * No kempld_pdev device has been registered in kempld_init,
 		 * so we seem to be probing an ACPI platform device.
 		 */
-		ret = kempld_get_acpi_data(pdev);
+		pdata = device_get_match_data(dev);
+		if (!pdata)
+			return -ENODEV;
+
+		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
 		if (ret)
 			return ret;
-	} else if (kempld_pdev != pdev) {
+	} else if (kempld_pdev == pdev) {
+		pdata = dev_get_platdata(dev);
+	} else {
 		/*
 		 * The platform device we are probing is not the one we
 		 * registered in kempld_init using the DMI table, so this one
@@ -472,7 +439,6 @@ static int kempld_probe(struct platform_device *pdev)
 		dev_notice(dev, "platform device exists - not using ACPI\n");
 		return -ENODEV;
 	}
-	pdata = dev_get_platdata(dev);
 
 	pld = devm_kzalloc(dev, sizeof(*pld), GFP_KERNEL);
 	if (!pld)
@@ -503,25 +469,22 @@ static void kempld_remove(struct platform_device *pdev)
 	struct kempld_device_data *pld = platform_get_drvdata(pdev);
 	const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev);
 
-	sysfs_remove_group(&pld->dev->kobj, &pld_attr_group);
-
 	mfd_remove_devices(&pdev->dev);
 	pdata->release_hardware_mutex(pld);
 }
 
-#ifdef CONFIG_ACPI
 static const struct acpi_device_id kempld_acpi_table[] = {
 	{ "KEM0000", (kernel_ulong_t)&kempld_platform_data_generic },
 	{ "KEM0001", (kernel_ulong_t)&kempld_platform_data_generic },
 	{}
 };
 MODULE_DEVICE_TABLE(acpi, kempld_acpi_table);
-#endif
 
 static struct platform_driver kempld_driver = {
 	.driver		= {
 		.name	= "kempld",
-		.acpi_match_table = ACPI_PTR(kempld_acpi_table),
+		.acpi_match_table = kempld_acpi_table,
+		.dev_groups	  = pld_groups,
 	},
 	.probe		= kempld_probe,
 	.remove_new	= kempld_remove,
@@ -929,9 +892,7 @@ static int __init kempld_init(void)
 
 static void __exit kempld_exit(void)
 {
-	if (kempld_pdev)
-		platform_device_unregister(kempld_pdev);
-
+	platform_device_unregister(kempld_pdev);
 	platform_driver_unregister(&kempld_driver);
 }
 
diff --git a/drivers/mfd/ocelot-spi.c b/drivers/mfd/ocelot-spi.c
index 94f82677675b40..b015c8683f1bcf 100644
--- a/drivers/mfd/ocelot-spi.c
+++ b/drivers/mfd/ocelot-spi.c
@@ -145,7 +145,6 @@ static int ocelot_spi_regmap_bus_read(void *context, const void *reg, size_t reg
 	struct device *dev = context;
 	struct ocelot_ddata *ddata;
 	struct spi_device *spi;
-	struct spi_message msg;
 	unsigned int index = 0;
 
 	ddata = dev_get_drvdata(dev);
@@ -166,9 +165,7 @@ static int ocelot_spi_regmap_bus_read(void *context, const void *reg, size_t reg
 	xfers[index].len = val_size;
 	index++;
 
-	spi_message_init_with_transfers(&msg, xfers, index);
-
-	return spi_sync(spi, &msg);
+	return spi_sync_transfer(spi, xfers, index);
 }
 
 static int ocelot_spi_regmap_bus_write(void *context, const void *data, size_t count)
diff --git a/drivers/mfd/rohm-bd71828.c b/drivers/mfd/rohm-bd71828.c
index 2f3826c7eef49b..5b4290f116fc78 100644
--- a/drivers/mfd/rohm-bd71828.c
+++ b/drivers/mfd/rohm-bd71828.c
@@ -464,6 +464,27 @@ static int set_clk_mode(struct device *dev, struct regmap *regmap,
 				  OUT32K_MODE_CMOS);
 }
 
+static struct i2c_client *bd71828_dev;
+static void bd71828_power_off(void)
+{
+	while (true) {
+		s32 val;
+
+		/* We are not allowed to sleep, so do not use regmap involving mutexes here. */
+		val = i2c_smbus_read_byte_data(bd71828_dev, BD71828_REG_PS_CTRL_1);
+		if (val >= 0)
+			i2c_smbus_write_byte_data(bd71828_dev,
+						  BD71828_REG_PS_CTRL_1,
+						  BD71828_MASK_STATE_HBNT | (u8)val);
+		mdelay(500);
+	}
+}
+
+static void bd71828_remove_poweroff(void *data)
+{
+	pm_power_off = NULL;
+}
+
 static int bd71828_i2c_probe(struct i2c_client *i2c)
 {
 	struct regmap_irq_chip_data *irq_data;
@@ -542,7 +563,20 @@ static int bd71828_i2c_probe(struct i2c_client *i2c)
 	ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, mfd, cells,
 				   NULL, 0, regmap_irq_get_domain(irq_data));
 	if (ret)
-		dev_err_probe(&i2c->dev, ret, "Failed to create subdevices\n");
+		return	dev_err_probe(&i2c->dev, ret, "Failed to create subdevices\n");
+
+	if (of_device_is_system_power_controller(i2c->dev.of_node) &&
+	    chip_type == ROHM_CHIP_TYPE_BD71828) {
+		if (!pm_power_off) {
+			bd71828_dev = i2c;
+			pm_power_off = bd71828_power_off;
+			ret = devm_add_action_or_reset(&i2c->dev,
+						       bd71828_remove_poweroff,
+						       NULL);
+		} else {
+			dev_warn(&i2c->dev, "Poweroff callback already assigned\n");
+		}
+	}
 
 	return ret;
 }
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index c675dec587efb2..f84f60139bcfc9 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -22,13 +22,13 @@
 #include <linux/delay.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/slot-gpio.h>
 #include <linux/module.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinctrl-state.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/regulator/consumer.h>
diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
index 53d34c3eddceb1..97cd55fec0bffd 100644
--- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
@@ -11,13 +11,14 @@
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/io-64-nonatomic-hi-lo.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/platform_device.h>
 #include <linux/pagemap.h>
+#include <linux/platform_data/tmio.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/scatterlist.h>
 #include <linux/sys_soc.h>
 
diff --git a/drivers/mmc/host/renesas_sdhi_sys_dmac.c b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
index 9cf7f9feab72f1..68e31c37cce656 100644
--- a/drivers/mmc/host/renesas_sdhi_sys_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
@@ -11,13 +11,14 @@
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/platform_device.h>
 #include <linux/pagemap.h>
+#include <linux/platform_data/tmio.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/scatterlist.h>
 #include <linux/sys_soc.h>
 
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 93e912afd3ae5a..592506d83e2c1d 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -31,13 +31,14 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/slot-gpio.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/pagemap.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/pm_qos.h>
 #include <linux/pm_runtime.h>
diff --git a/drivers/mmc/host/uniphier-sd.c b/drivers/mmc/host/uniphier-sd.c
index 1404989e6151a4..bd231dbe90ba30 100644
--- a/drivers/mmc/host/uniphier-sd.c
+++ b/drivers/mmc/host/uniphier-sd.c
@@ -9,11 +9,11 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/mfd/syscon.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
index ee66c9751003de..988f1cd90032f2 100644
--- a/include/linux/mfd/intel-m10-bmc.h
+++ b/include/linux/mfd/intel-m10-bmc.h
@@ -205,6 +205,7 @@ struct m10bmc_csr_map {
 	unsigned int pr_reh_addr;
 	unsigned int pr_magic;
 	unsigned int rsu_update_counter;
+	unsigned int staging_size;
 };
 
 /**
diff --git a/include/linux/mfd/rohm-bd71828.h b/include/linux/mfd/rohm-bd71828.h
index 3b5f3a7db4bd66..ce786c96404a3d 100644
--- a/include/linux/mfd/rohm-bd71828.h
+++ b/include/linux/mfd/rohm-bd71828.h
@@ -4,6 +4,7 @@
 #ifndef __LINUX_MFD_BD71828_H__
 #define __LINUX_MFD_BD71828_H__
 
+#include <linux/bits.h>
 #include <linux/mfd/rohm-generic.h>
 #include <linux/mfd/rohm-shared.h>
 
@@ -41,7 +42,8 @@ enum {
 #define BD71828_REG_PS_CTRL_2		0x05
 #define BD71828_REG_PS_CTRL_3		0x06
 
-//#define BD71828_REG_SWRESET		0x06
+#define BD71828_MASK_STATE_HBNT		BIT(1)
+
 #define BD71828_MASK_RUN_LVL_CTRL	0x30
 
 /* Regulator control masks */
@@ -133,7 +135,6 @@ enum {
 #define BD71828_REG_LDO5_VOLT		0x43
 #define BD71828_REG_LDO5_VOLT_OPT	0x42
 #define BD71828_REG_LDO6_EN		0x44
-//#define BD71828_REG_LDO6_VOLT		0x4
 #define BD71828_REG_LDO7_EN		0x45
 #define BD71828_REG_LDO7_VOLT		0x46
 
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
deleted file mode 100644
index eace8ea6cda05a..00000000000000
--- a/include/linux/mfd/tmio.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef MFD_TMIO_H
-#define MFD_TMIO_H
-
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/io.h>
-#include <linux/jiffies.h>
-#include <linux/mmc/card.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-
-#define tmio_ioread8(addr) readb(addr)
-#define tmio_ioread16(addr) readw(addr)
-#define tmio_ioread16_rep(r, b, l) readsw(r, b, l)
-#define tmio_ioread32(addr) \
-	(((u32)readw((addr))) | (((u32)readw((addr) + 2)) << 16))
-
-#define tmio_iowrite8(val, addr) writeb((val), (addr))
-#define tmio_iowrite16(val, addr) writew((val), (addr))
-#define tmio_iowrite16_rep(r, b, l) writesw(r, b, l)
-#define tmio_iowrite32(val, addr) \
-	do { \
-		writew((val),       (addr)); \
-		writew((val) >> 16, (addr) + 2); \
-	} while (0)
-
-#define sd_config_write8(base, shift, reg, val) \
-	tmio_iowrite8((val), (base) + ((reg) << (shift)))
-#define sd_config_write16(base, shift, reg, val) \
-	tmio_iowrite16((val), (base) + ((reg) << (shift)))
-#define sd_config_write32(base, shift, reg, val) \
-	do { \
-		tmio_iowrite16((val), (base) + ((reg) << (shift)));   \
-		tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \
-	} while (0)
-
-/* tmio MMC platform flags */
-/*
- * Some controllers can support a 2-byte block size when the bus width
- * is configured in 4-bit mode.
- */
-#define TMIO_MMC_BLKSZ_2BYTES		BIT(1)
-/*
- * Some controllers can support SDIO IRQ signalling.
- */
-#define TMIO_MMC_SDIO_IRQ		BIT(2)
-
-/* Some features are only available or tested on R-Car Gen2 or later */
-#define TMIO_MMC_MIN_RCAR2		BIT(3)
-
-/*
- * Some controllers require waiting for the SD bus to become
- * idle before writing to some registers.
- */
-#define TMIO_MMC_HAS_IDLE_WAIT		BIT(4)
-
-/*
- * Use the busy timeout feature. Probably all TMIO versions support it. Yet,
- * we don't have documentation for old variants, so we enable only known good
- * variants with this flag. Can be removed once all variants are known good.
- */
-#define TMIO_MMC_USE_BUSY_TIMEOUT	BIT(5)
-
-/*
- * Some controllers have CMD12 automatically
- * issue/non-issue register
- */
-#define TMIO_MMC_HAVE_CMD12_CTRL	BIT(7)
-
-/* Controller has some SDIO status bits which must be 1 */
-#define TMIO_MMC_SDIO_STATUS_SETBITS	BIT(8)
-
-/*
- * Some controllers have a 32-bit wide data port register
- */
-#define TMIO_MMC_32BIT_DATA_PORT	BIT(9)
-
-/*
- * Some controllers allows to set SDx actual clock
- */
-#define TMIO_MMC_CLK_ACTUAL		BIT(10)
-
-/* Some controllers have a CBSY bit */
-#define TMIO_MMC_HAVE_CBSY		BIT(11)
-
-struct dma_chan;
-
-/*
- * data for the MMC controller
- */
-struct tmio_mmc_data {
-	void				*chan_priv_tx;
-	void				*chan_priv_rx;
-	unsigned int			hclk;
-	unsigned long			capabilities;
-	unsigned long			capabilities2;
-	unsigned long			flags;
-	u32				ocr_mask;	/* available voltages */
-	dma_addr_t			dma_rx_offset;
-	unsigned int			max_blk_count;
-	unsigned short			max_segs;
-	void (*set_pwr)(struct platform_device *host, int state);
-	void (*set_clk_div)(struct platform_device *host, int state);
-};
-
-/*
- * data for the NAND controller
- */
-struct tmio_nand_data {
-	struct nand_bbt_descr	*badblock_pattern;
-	struct mtd_partition	*partition;
-	unsigned int		num_partitions;
-	const char *const	*part_parsers;
-};
-
-#define FBIO_TMIO_ACC_WRITE	0x7C639300
-#define FBIO_TMIO_ACC_SYNC	0x7C639301
-
-struct tmio_fb_data {
-	int			(*lcd_set_power)(struct platform_device *fb_dev,
-						 bool on);
-	int			(*lcd_mode)(struct platform_device *fb_dev,
-					    const struct fb_videomode *mode);
-	int			num_modes;
-	struct fb_videomode	*modes;
-
-	/* in mm: size of screen */
-	int			height;
-	int			width;
-};
-
-#endif
diff --git a/include/linux/platform_data/tmio.h b/include/linux/platform_data/tmio.h
new file mode 100644
index 00000000000000..1cf418643da98a
--- /dev/null
+++ b/include/linux/platform_data/tmio.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef MFD_TMIO_H
+#define MFD_TMIO_H
+
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+/* TMIO MMC platform flags */
+
+/*
+ * Some controllers can support a 2-byte block size when the bus width is
+ * configured in 4-bit mode.
+ */
+#define TMIO_MMC_BLKSZ_2BYTES		BIT(1)
+
+/* Some controllers can support SDIO IRQ signalling */
+#define TMIO_MMC_SDIO_IRQ		BIT(2)
+
+/* Some features are only available or tested on R-Car Gen2 or later */
+#define TMIO_MMC_MIN_RCAR2		BIT(3)
+
+/*
+ * Some controllers require waiting for the SD bus to become idle before
+ * writing to some registers.
+ */
+#define TMIO_MMC_HAS_IDLE_WAIT		BIT(4)
+
+/*
+ * Use the busy timeout feature. Probably all TMIO versions support it. Yet,
+ * we don't have documentation for old variants, so we enable only known good
+ * variants with this flag. Can be removed once all variants are known good.
+ */
+#define TMIO_MMC_USE_BUSY_TIMEOUT	BIT(5)
+
+/* Some controllers have CMD12 automatically issue/non-issue register */
+#define TMIO_MMC_HAVE_CMD12_CTRL	BIT(7)
+
+/* Controller has some SDIO status bits which must be 1 */
+#define TMIO_MMC_SDIO_STATUS_SETBITS	BIT(8)
+
+/* Some controllers have a 32-bit wide data port register */
+#define TMIO_MMC_32BIT_DATA_PORT	BIT(9)
+
+/* Some controllers allows to set SDx actual clock */
+#define TMIO_MMC_CLK_ACTUAL		BIT(10)
+
+/* Some controllers have a CBSY bit */
+#define TMIO_MMC_HAVE_CBSY		BIT(11)
+
+struct tmio_mmc_data {
+	void				*chan_priv_tx;
+	void				*chan_priv_rx;
+	unsigned int			hclk;
+	unsigned long			capabilities;
+	unsigned long			capabilities2;
+	unsigned long			flags;
+	u32				ocr_mask;	/* available voltages */
+	dma_addr_t			dma_rx_offset;
+	unsigned int			max_blk_count;
+	unsigned short			max_segs;
+	void (*set_pwr)(struct platform_device *host, int state);
+	void (*set_clk_div)(struct platform_device *host, int state);
+};
+#endif