diff options
30 files changed, 1280 insertions, 1929 deletions
diff --git a/arch/x86/include/asm/iosf_mbi.h b/arch/x86/include/asm/iosf_mbi.h index 5270ff39b9afec..a1911fea87392e 100644 --- a/arch/x86/include/asm/iosf_mbi.h +++ b/arch/x86/include/asm/iosf_mbi.h @@ -39,6 +39,7 @@ #define BT_MBI_UNIT_PMC 0x04 #define BT_MBI_UNIT_GFX 0x06 #define BT_MBI_UNIT_SMI 0x0C +#define BT_MBI_UNIT_CCK 0x14 #define BT_MBI_UNIT_USB 0x43 #define BT_MBI_UNIT_SATA 0xA3 #define BT_MBI_UNIT_PCIE 0xA6 diff --git a/drivers/staging/media/atomisp/Kconfig b/drivers/staging/media/atomisp/Kconfig index fea06cb0eb48f4..37577bb7299809 100644 --- a/drivers/staging/media/atomisp/Kconfig +++ b/drivers/staging/media/atomisp/Kconfig @@ -22,7 +22,7 @@ config VIDEO_ATOMISP module will be called atomisp config VIDEO_ATOMISP_ISP2401 - bool "VIDEO_ATOMISP_ISP2401" + bool "Use Intel Atom ISP on Cherrytail/Anniedale (ISP2401)" depends on VIDEO_ATOMISP help Enable support for Atom ISP2401-based boards. diff --git a/drivers/staging/media/atomisp/Makefile b/drivers/staging/media/atomisp/Makefile index 9dc8072799e3f4..205d0f8cc2e120 100644 --- a/drivers/staging/media/atomisp/Makefile +++ b/drivers/staging/media/atomisp/Makefile @@ -156,6 +156,7 @@ atomisp-objs += \ pci/hive_isp_css_common/host/timed_ctrl.o \ pci/hive_isp_css_common/host/vmem.o \ pci/hive_isp_css_shared/host/tag.o \ + pci/system_local.o \ obj-byt = \ pci/css_2400_system/hive/ia_css_isp_configs.o \ @@ -182,7 +183,6 @@ INCLUDES += \ -I$(atomisp)/include/hmm/ \ -I$(atomisp)/include/mmu/ \ -I$(atomisp)/pci/ \ - -I$(atomisp)/pci/hrt/ \ -I$(atomisp)/pci/base/circbuf/interface/ \ -I$(atomisp)/pci/base/refcount/interface/ \ -I$(atomisp)/pci/camera/pipe/interface/ \ @@ -192,7 +192,6 @@ INCLUDES += \ -I$(atomisp)/pci/hive_isp_css_include/ \ -I$(atomisp)/pci/hive_isp_css_include/device_access/ \ -I$(atomisp)/pci/hive_isp_css_include/host/ \ - -I$(atomisp)/pci/hive_isp_css_include/memory_access/ \ -I$(atomisp)/pci/hive_isp_css_shared/ \ -I$(atomisp)/pci/hive_isp_css_shared/host/ \ -I$(atomisp)/pci/isp/kernels/ \ @@ -311,9 +310,7 @@ INCLUDES += \ -I$(atomisp)/pci/runtime/tagger/interface/ INCLUDES_byt += \ - -I$(atomisp)/pci/css_2400_system/ \ -I$(atomisp)/pci/css_2400_system/hive/ \ - -I$(atomisp)/pci/css_2400_system/hrt/ \ INCLUDES_cht += \ -I$(atomisp)/pci/css_2401_system/ \ @@ -321,7 +318,6 @@ INCLUDES_cht += \ -I$(atomisp)/pci/css_2401_system/hive/ \ -I$(atomisp)/pci/css_2401_system/hrt/ \ -# -I$(atomisp)/pci/css_2401_system/hrt/ \ # -I$(atomisp)/pci/css_2401_system/hive_isp_css_2401_system_generated/ \ DEFINES := -DHRT_HW -DHRT_ISP_CSS_CUSTOM_HOST -DHRT_USE_VIR_ADDRS -D__HOST__ diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c index 90d125ba080f68..c90730513438bd 100644 --- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c +++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c @@ -495,11 +495,11 @@ static int ov2680_h_flip(struct v4l2_subdev *sd, s32 value) ret = ov2680_read_reg(client, 1, OV2680_MIRROR_REG, &val); if (ret) return ret; - if (value) { + if (value) val |= OV2680_FLIP_MIRROR_BIT_ENABLE; - } else { + else val &= ~OV2680_FLIP_MIRROR_BIT_ENABLE; - } + ret = ov2680_write_reg(client, 1, OV2680_MIRROR_REG, val); if (ret) diff --git a/drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c b/drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c index 97ab10bc45ca65..e698b63d6cb7a2 100644 --- a/drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c +++ b/drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c @@ -1899,7 +1899,7 @@ static int ov5693_probe(struct i2c_client *client) { struct ov5693_device *dev; int i2c; - int ret = 0; + int ret; void *pdata; unsigned int i; @@ -1929,8 +1929,10 @@ static int ov5693_probe(struct i2c_client *client) pdata = gmin_camera_platform_data(&dev->sd, ATOMISP_INPUT_FORMAT_RAW_10, atomisp_bayer_order_bggr); - if (!pdata) + if (!pdata) { + ret = -EINVAL; goto out_free; + } ret = ov5693_s_config(&dev->sd, client->irq, pdata); if (ret) diff --git a/drivers/staging/media/atomisp/include/linux/atomisp_platform.h b/drivers/staging/media/atomisp/include/linux/atomisp_platform.h index 873344a02ccf67..5a5121d958ede5 100644 --- a/drivers/staging/media/atomisp/include/linux/atomisp_platform.h +++ b/drivers/staging/media/atomisp/include/linux/atomisp_platform.h @@ -250,6 +250,7 @@ const struct atomisp_camera_caps *atomisp_get_default_camera_caps(void); #define IS_MFLD __IS_SOC(INTEL_FAM6_ATOM_SALTWELL_MID) #define IS_BYT __IS_SOC(INTEL_FAM6_ATOM_SILVERMONT) #define IS_CHT __IS_SOC(INTEL_FAM6_ATOM_AIRMONT) +#define IS_MRFD __IS_SOC(INTEL_FAM6_ATOM_SILVERMONT_MID) #define IS_MOFD __IS_SOC(INTEL_FAM6_ATOM_AIRMONT_MID) /* Both CHT and MOFD come with ISP2401 */ diff --git a/drivers/staging/media/atomisp/pci/atomisp-regs.h b/drivers/staging/media/atomisp/pci/atomisp-regs.h index de34ee28e3900f..022997f47121b4 100644 --- a/drivers/staging/media/atomisp/pci/atomisp-regs.h +++ b/drivers/staging/media/atomisp/pci/atomisp-regs.h @@ -20,9 +20,6 @@ #define ATOMISP_REGS_H /* common register definitions */ -#define PUNIT_PORT 0x04 -#define CCK_PORT 0x14 - #define PCICMDSTS 0x01 #define INTR 0x0f #define MSI_CAPID 0x24 diff --git a/drivers/staging/media/atomisp/pci/atomisp_acc.c b/drivers/staging/media/atomisp/pci/atomisp_acc.c index 76861396ba864d..f638d0bd09fe6f 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_acc.c +++ b/drivers/staging/media/atomisp/pci/atomisp_acc.c @@ -355,11 +355,11 @@ int atomisp_acc_map(struct atomisp_sub_device *asd, struct atomisp_acc_map *map) pgnr = DIV_ROUND_UP(map->length, PAGE_SIZE); if (pgnr < ((PAGE_ALIGN(map->length)) >> PAGE_SHIFT)) { - dev_err(atomisp_dev, + dev_err(asd->isp->dev, "user space memory size is less than the expected size..\n"); return -ENOMEM; } else if (pgnr > ((PAGE_ALIGN(map->length)) >> PAGE_SHIFT)) { - dev_err(atomisp_dev, + dev_err(asd->isp->dev, "user space memory size is large than the expected size..\n"); return -ENOMEM; } diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp_cmd.c index 7b936e5a5f037a..8ea65bef35d24f 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_cmd.c +++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.c @@ -21,6 +21,7 @@ #include <linux/firmware.h> #include <linux/pci.h> #include <linux/interrupt.h> +#include <linux/io.h> #include <linux/kernel.h> #include <linux/kfifo.h> #include <linux/pm_runtime.h> @@ -109,7 +110,7 @@ struct atomisp_acc_pipe *atomisp_to_acc_pipe(struct video_device *dev) static unsigned short atomisp_get_sensor_fps(struct atomisp_sub_device *asd) { - struct v4l2_subdev_frame_interval fi; + struct v4l2_subdev_frame_interval fi = { 0 }; struct atomisp_device *isp = asd->isp; unsigned short fps = 0; @@ -206,6 +207,7 @@ int atomisp_freq_scaling(struct atomisp_device *isp, enum atomisp_dfs_mode mode, bool force) { + struct pci_dev *pdev = to_pci_dev(isp->dev); /* FIXME! Only use subdev[0] status yet */ struct atomisp_sub_device *asd = &isp->asd[0]; const struct atomisp_dfs_config *dfs; @@ -219,7 +221,7 @@ int atomisp_freq_scaling(struct atomisp_device *isp, return -EINVAL; } - if ((isp->pdev->device & ATOMISP_PCI_DEVICE_SOC_MASK) == + if ((pdev->device & ATOMISP_PCI_DEVICE_SOC_MASK) == ATOMISP_PCI_DEVICE_SOC_CHT && ATOMISP_USE_YUVPP(asd)) isp->dfs = &dfs_config_cht_soc; @@ -357,39 +359,41 @@ static void clear_isp_irq(enum hrt_isp_css_irq irq) irq_clear_all(IRQ0_ID); } -void atomisp_msi_irq_init(struct atomisp_device *isp, struct pci_dev *dev) +void atomisp_msi_irq_init(struct atomisp_device *isp) { + struct pci_dev *pdev = to_pci_dev(isp->dev); u32 msg32; u16 msg16; - pci_read_config_dword(dev, PCI_MSI_CAPID, &msg32); + pci_read_config_dword(pdev, PCI_MSI_CAPID, &msg32); msg32 |= 1 << MSI_ENABLE_BIT; - pci_write_config_dword(dev, PCI_MSI_CAPID, msg32); + pci_write_config_dword(pdev, PCI_MSI_CAPID, msg32); msg32 = (1 << INTR_IER) | (1 << INTR_IIR); - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, msg32); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, msg32); - pci_read_config_word(dev, PCI_COMMAND, &msg16); + pci_read_config_word(pdev, PCI_COMMAND, &msg16); msg16 |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INTX_DISABLE); - pci_write_config_word(dev, PCI_COMMAND, msg16); + pci_write_config_word(pdev, PCI_COMMAND, msg16); } -void atomisp_msi_irq_uninit(struct atomisp_device *isp, struct pci_dev *dev) +void atomisp_msi_irq_uninit(struct atomisp_device *isp) { + struct pci_dev *pdev = to_pci_dev(isp->dev); u32 msg32; u16 msg16; - pci_read_config_dword(dev, PCI_MSI_CAPID, &msg32); + pci_read_config_dword(pdev, PCI_MSI_CAPID, &msg32); msg32 &= ~(1 << MSI_ENABLE_BIT); - pci_write_config_dword(dev, PCI_MSI_CAPID, msg32); + pci_write_config_dword(pdev, PCI_MSI_CAPID, msg32); msg32 = 0x0; - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, msg32); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, msg32); - pci_read_config_word(dev, PCI_COMMAND, &msg16); + pci_read_config_word(pdev, PCI_COMMAND, &msg16); msg16 &= ~(PCI_COMMAND_MASTER); - pci_write_config_word(dev, PCI_COMMAND, msg16); + pci_write_config_word(pdev, PCI_COMMAND, msg16); } static void atomisp_sof_event(struct atomisp_sub_device *asd) @@ -480,11 +484,12 @@ static void print_csi_rx_errors(enum mipi_port_id port, /* Clear irq reg */ static void clear_irq_reg(struct atomisp_device *isp) { + struct pci_dev *pdev = to_pci_dev(isp->dev); u32 msg_ret; - pci_read_config_dword(isp->pdev, PCI_INTERRUPT_CTRL, &msg_ret); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &msg_ret); msg_ret |= 1 << INTR_IIR; - pci_write_config_dword(isp->pdev, PCI_INTERRUPT_CTRL, msg_ret); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, msg_ret); } static struct atomisp_sub_device * @@ -665,11 +670,10 @@ bool atomisp_buffers_queued_pipe(struct atomisp_video_pipe *pipe) void dump_sp_dmem(struct atomisp_device *isp, unsigned int addr, unsigned int size) { - u32 __iomem *io_virt_addr; unsigned int data = 0; unsigned int size32 = DIV_ROUND_UP(size, sizeof(u32)); - dev_dbg(isp->dev, "atomisp_io_base:%p\n", atomisp_io_base); + dev_dbg(isp->dev, "atomisp mmio base: %p\n", isp->base); dev_dbg(isp->dev, "%s, addr:0x%x, size: %d, size32: %d\n", __func__, addr, size, size32); if (size32 * 4 + addr > 0x4000) { @@ -678,13 +682,12 @@ void dump_sp_dmem(struct atomisp_device *isp, unsigned int addr, return; } addr += SP_DMEM_BASE; - io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + addr &= 0x003FFFFF; do { - data = *io_virt_addr; + data = readl(isp->base + addr); dev_dbg(isp->dev, "%s, \t [0x%x]:0x%x\n", __func__, addr, data); - io_virt_addr += sizeof(u32); - size32 -= 1; - } while (size32 > 0); + addr += sizeof(u32); + } while (--size32); } static struct videobuf_buffer *atomisp_css_frame_to_vbuf( @@ -1289,6 +1292,7 @@ void atomisp_delayed_init_work(struct work_struct *work) static void __atomisp_css_recover(struct atomisp_device *isp, bool isp_timeout) { + struct pci_dev *pdev = to_pci_dev(isp->dev); enum ia_css_pipe_id css_pipe_id; bool stream_restart[MAX_STREAM_NUM] = {0}; bool depth_mode = false; @@ -1372,8 +1376,8 @@ static void __atomisp_css_recover(struct atomisp_device *isp, bool isp_timeout) clear_isp_irq(hrt_isp_css_irq_sp); /* Set the SRSE to 3 before resetting */ - pci_write_config_dword(isp->pdev, PCI_I_CONTROL, isp->saved_regs.i_control | - MRFLD_PCI_I_CONTROL_SRSE_RESET_MASK); + pci_write_config_dword(pdev, PCI_I_CONTROL, + isp->saved_regs.i_control | MRFLD_PCI_I_CONTROL_SRSE_RESET_MASK); /* reset ISP and restore its state */ isp->isp_timeout = true; @@ -6158,6 +6162,7 @@ out: /*Turn off ISP dphy */ int atomisp_ospm_dphy_down(struct atomisp_device *isp) { + struct pci_dev *pdev = to_pci_dev(isp->dev); unsigned long flags; u32 reg; @@ -6179,9 +6184,9 @@ done: * MRFLD HW design need all CSI ports are disabled before * powering down the IUNIT. */ - pci_read_config_dword(isp->pdev, MRFLD_PCI_CSI_CONTROL, ®); + pci_read_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, ®); reg |= MRFLD_ALL_CSI_PORTS_OFF_MASK; - pci_write_config_dword(isp->pdev, MRFLD_PCI_CSI_CONTROL, reg); + pci_write_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, reg); return 0; } diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.h b/drivers/staging/media/atomisp/pci/atomisp_cmd.h index 0bde995f1a8d37..1c0d464c2ac1d8 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_cmd.h +++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.h @@ -68,8 +68,8 @@ bool atomisp_buffers_queued_pipe(struct atomisp_video_pipe *pipe); /* * Interrupt functions */ -void atomisp_msi_irq_init(struct atomisp_device *isp, struct pci_dev *dev); -void atomisp_msi_irq_uninit(struct atomisp_device *isp, struct pci_dev *dev); +void atomisp_msi_irq_init(struct atomisp_device *isp); +void atomisp_msi_irq_uninit(struct atomisp_device *isp); void atomisp_wdt_work(struct work_struct *work); void atomisp_wdt(struct timer_list *t); void atomisp_setup_flash(struct atomisp_sub_device *asd); diff --git a/drivers/staging/media/atomisp/pci/atomisp_compat.h b/drivers/staging/media/atomisp/pci/atomisp_compat.h index b2ed83c2f337a1..6a2a81a3eb2337 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_compat.h +++ b/drivers/staging/media/atomisp/pci/atomisp_compat.h @@ -29,8 +29,6 @@ struct atomisp_sub_device; struct video_device; enum atomisp_input_stream_id; -extern void __iomem *atomisp_io_base; - struct atomisp_metadata_buf { struct ia_css_metadata *metadata; void *md_vptr; diff --git a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c index c1e282a974d03f..cccc5bfa105732 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c +++ b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c @@ -33,13 +33,12 @@ #include "atomisp_ioctl.h" #include "atomisp_acc.h" -#include <asm/intel-mid.h> - #include "ia_css_debug.h" #include "ia_css_isp_param.h" #include "sh_css_hrt.h" #include "ia_css_isys.h" +#include <linux/io.h> #include <linux/pm_runtime.h> /* Assume max number of ACC stages */ @@ -69,92 +68,94 @@ struct bayer_ds_factor { static void atomisp_css2_hw_store_8(hrt_address addr, uint8_t data) { - s8 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; spin_lock_irqsave(&mmio_lock, flags); - *io_virt_addr = data; + writeb(data, isp->base + (addr & 0x003FFFFF)); spin_unlock_irqrestore(&mmio_lock, flags); } static void atomisp_css2_hw_store_16(hrt_address addr, uint16_t data) { - s16 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; spin_lock_irqsave(&mmio_lock, flags); - *io_virt_addr = data; + writew(data, isp->base + (addr & 0x003FFFFF)); spin_unlock_irqrestore(&mmio_lock, flags); } void atomisp_css2_hw_store_32(hrt_address addr, uint32_t data) { - s32 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; spin_lock_irqsave(&mmio_lock, flags); - *io_virt_addr = data; + writel(data, isp->base + (addr & 0x003FFFFF)); spin_unlock_irqrestore(&mmio_lock, flags); } static uint8_t atomisp_css2_hw_load_8(hrt_address addr) { - s8 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; u8 ret; spin_lock_irqsave(&mmio_lock, flags); - ret = *io_virt_addr; + ret = readb(isp->base + (addr & 0x003FFFFF)); spin_unlock_irqrestore(&mmio_lock, flags); return ret; } static uint16_t atomisp_css2_hw_load_16(hrt_address addr) { - s16 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; u16 ret; spin_lock_irqsave(&mmio_lock, flags); - ret = *io_virt_addr; + ret = readw(isp->base + (addr & 0x003FFFFF)); spin_unlock_irqrestore(&mmio_lock, flags); return ret; } static uint32_t atomisp_css2_hw_load_32(hrt_address addr) { - s32 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; u32 ret; spin_lock_irqsave(&mmio_lock, flags); - ret = *io_virt_addr; + ret = readl(isp->base + (addr & 0x003FFFFF)); spin_unlock_irqrestore(&mmio_lock, flags); return ret; } -static void atomisp_css2_hw_store(hrt_address addr, - const void *from, uint32_t n) +static void atomisp_css2_hw_store(hrt_address addr, const void *from, uint32_t n) { - s8 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; unsigned int i; + addr &= 0x003FFFFF; spin_lock_irqsave(&mmio_lock, flags); - for (i = 0; i < n; i++, io_virt_addr++, from++) - *io_virt_addr = *(s8 *)from; + for (i = 0; i < n; i++, from++) + writeb(*(s8 *)from, isp->base + addr + i); + spin_unlock_irqrestore(&mmio_lock, flags); } static void atomisp_css2_hw_load(hrt_address addr, void *to, uint32_t n) { - s8 __iomem *io_virt_addr = atomisp_io_base + (addr & 0x003FFFFF); + struct atomisp_device *isp = dev_get_drvdata(atomisp_dev); unsigned long flags; unsigned int i; + addr &= 0x003FFFFF; spin_lock_irqsave(&mmio_lock, flags); - for (i = 0; i < n; i++, to++, io_virt_addr++) - *(s8 *)to = *io_virt_addr; + for (i = 0; i < n; i++, to++) + *(s8 *)to = readb(isp->base + addr + i); spin_unlock_irqrestore(&mmio_lock, flags); } @@ -181,10 +182,10 @@ void atomisp_load_uint32(hrt_address addr, uint32_t *data) *data = atomisp_css2_hw_load_32(addr); } -static int hmm_get_mmu_base_addr(unsigned int *mmu_base_addr) +static int hmm_get_mmu_base_addr(struct device *dev, unsigned int *mmu_base_addr) { if (!sh_mmu_mrfld.get_pd_base) { - dev_err(atomisp_dev, "get mmu base address failed.\n"); + dev_err(dev, "get mmu base address failed.\n"); return -EINVAL; } @@ -839,7 +840,7 @@ int atomisp_css_init(struct atomisp_device *isp) int ret; int err; - ret = hmm_get_mmu_base_addr(&mmu_base_addr); + ret = hmm_get_mmu_base_addr(isp->dev, &mmu_base_addr); if (ret) return ret; @@ -941,7 +942,7 @@ int atomisp_css_resume(struct atomisp_device *isp) unsigned int mmu_base_addr; int ret; - ret = hmm_get_mmu_base_addr(&mmu_base_addr); + ret = hmm_get_mmu_base_addr(isp->dev, &mmu_base_addr); if (ret) { dev_err(isp->dev, "get base address error.\n"); return -EINVAL; @@ -1966,8 +1967,7 @@ void atomisp_css_input_set_mode(struct atomisp_sub_device *asd, true, 0x13000, &size_mem_words) != 0) { - if (intel_mid_identify_cpu() == - INTEL_MID_CPU_CHIP_TANGIER) + if (IS_MRFD) size_mem_words = CSS_MIPI_FRAME_BUFFER_SIZE_2; else size_mem_words = CSS_MIPI_FRAME_BUFFER_SIZE_1; @@ -2414,13 +2414,13 @@ static void __configure_preview_pp_input(struct atomisp_sub_device *asd, struct ia_css_resolution *effective_res = &stream_config->input_config.effective_res; - const struct bayer_ds_factor bds_fct[] = {{2, 1}, {3, 2}, {5, 4} }; + static const struct bayer_ds_factor bds_fct[] = {{2, 1}, {3, 2}, {5, 4} }; /* * BZ201033: YUV decimation factor of 4 causes couple of rightmost * columns to be shaded. Remove this factor to work around the CSS bug. * const unsigned int yuv_dec_fct[] = {4, 2}; */ - const unsigned int yuv_dec_fct[] = { 2 }; + static const unsigned int yuv_dec_fct[] = { 2 }; unsigned int i; if (width == 0 && height == 0) @@ -2540,7 +2540,7 @@ static void __configure_video_pp_input(struct atomisp_sub_device *asd, struct ia_css_resolution *effective_res = &stream_config->input_config.effective_res; - const struct bayer_ds_factor bds_factors[] = { + static const struct bayer_ds_factor bds_factors[] = { {8, 1}, {6, 1}, {4, 1}, {3, 1}, {2, 1}, {3, 2} }; unsigned int i; @@ -4337,7 +4337,7 @@ static const char * const fw_acc_type_name[] = { [IA_CSS_ACC_STANDALONE] = "Stand-alone acceleration", }; -int atomisp_css_dump_blob_infor(void) +int atomisp_css_dump_blob_infor(struct atomisp_device *isp) { struct ia_css_blob_descr *bd = sh_css_blob_info; unsigned int i, nm = sh_css_num_binaries; @@ -4354,8 +4354,7 @@ int atomisp_css_dump_blob_infor(void) for (i = 0; i < sh_css_num_binaries - NUM_OF_SPS; i++) { switch (bd[i].header.type) { case ia_css_isp_firmware: - dev_dbg(atomisp_dev, - "Num%2d type %s (%s), binary id is %2d, name is %s\n", + dev_dbg(isp->dev, "Num%2d type %s (%s), binary id is %2d, name is %s\n", i + NUM_OF_SPS, fw_type_name[bd[i].header.type], fw_acc_type_name[bd[i].header.info.isp.type], @@ -4363,8 +4362,7 @@ int atomisp_css_dump_blob_infor(void) bd[i].name); break; default: - dev_dbg(atomisp_dev, - "Num%2d type %s, name is %s\n", + dev_dbg(isp->dev, "Num%2d type %s, name is %s\n", i + NUM_OF_SPS, fw_type_name[bd[i].header.type], bd[i].name); } diff --git a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.h b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.h index 8376aec18e3e3f..e0601534380f4c 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.h +++ b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.h @@ -153,7 +153,7 @@ int atomisp_css_debug_dump_isp_binary(void); int atomisp_css_dump_sp_raw_copy_linecount(bool reduced); -int atomisp_css_dump_blob_infor(void); +int atomisp_css_dump_blob_infor(struct atomisp_device *isp); void atomisp_css_set_isp_config_id(struct atomisp_sub_device *asd, uint32_t isp_config_id); diff --git a/drivers/staging/media/atomisp/pci/atomisp_drvfs.c b/drivers/staging/media/atomisp/pci/atomisp_drvfs.c index fe0e2bfde27f19..f670faf978e6e7 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_drvfs.c +++ b/drivers/staging/media/atomisp/pci/atomisp_drvfs.c @@ -62,9 +62,9 @@ static inline int iunit_dump_dbgopt(struct atomisp_device *isp, if (opt & OPTION_VALID) { if (opt & OPTION_BIN_LIST) { - ret = atomisp_css_dump_blob_infor(); + ret = atomisp_css_dump_blob_infor(isp); if (ret) { - dev_err(atomisp_dev, "%s dump blob infor err[ret:%d]\n", + dev_err(isp->dev, "%s dump blob infor err[ret:%d]\n", __func__, ret); goto opt_err; } @@ -76,7 +76,7 @@ static inline int iunit_dump_dbgopt(struct atomisp_device *isp, atomisp_css_debug_dump_isp_binary(); } else { ret = -EPERM; - dev_err(atomisp_dev, "%s dump running bin err[ret:%d]\n", + dev_err(isp->dev, "%s dump running bin err[ret:%d]\n", __func__, ret); goto opt_err; } @@ -86,8 +86,7 @@ static inline int iunit_dump_dbgopt(struct atomisp_device *isp, hmm_show_mem_stat(__func__, __LINE__); } else { ret = -EINVAL; - dev_err(atomisp_dev, "%s dump nothing[ret=%d]\n", __func__, - ret); + dev_err(isp->dev, "%s dump nothing[ret=%d]\n", __func__, ret); } opt_err: @@ -185,8 +184,9 @@ static void iunit_drvfs_remove_files(struct device_driver *drv) driver_remove_file(drv, &iunit_drvfs_attrs[i]); } -int atomisp_drvfs_init(struct device_driver *drv, struct atomisp_device *isp) +int atomisp_drvfs_init(struct atomisp_device *isp) { + struct device_driver *drv = isp->dev->driver; int ret; iunit_debug.isp = isp; @@ -194,7 +194,7 @@ int atomisp_drvfs_init(struct device_driver *drv, struct atomisp_device *isp) ret = iunit_drvfs_create_files(iunit_debug.drv); if (ret) { - dev_err(atomisp_dev, "drvfs_create_files error: %d\n", ret); + dev_err(isp->dev, "drvfs_create_files error: %d\n", ret); iunit_drvfs_remove_files(iunit_debug.drv); } diff --git a/drivers/staging/media/atomisp/pci/atomisp_drvfs.h b/drivers/staging/media/atomisp/pci/atomisp_drvfs.h index 4911037231fb16..8f4cc722b881e8 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_drvfs.h +++ b/drivers/staging/media/atomisp/pci/atomisp_drvfs.h @@ -19,7 +19,7 @@ #ifndef __ATOMISP_DRVFS_H__ #define __ATOMISP_DRVFS_H__ -int atomisp_drvfs_init(struct device_driver *drv, struct atomisp_device *isp); +int atomisp_drvfs_init(struct atomisp_device *isp); void atomisp_drvfs_exit(void); #endif /* __ATOMISP_DRVFS_H__ */ diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c index 1af9da8acf4cf8..0df46a1af5f0a2 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c @@ -26,6 +26,9 @@ enum clock_rate { #define CLK_RATE_19_2MHZ 19200000 #define CLK_RATE_25_0MHZ 25000000 +/* Valid clock number range from 0 to 5 */ +#define MAX_CLK_COUNT 5 + /* X-Powers AXP288 register set */ #define ALDO1_SEL_REG 0x28 #define ALDO1_CTRL3_REG 0x13 @@ -61,9 +64,7 @@ enum clock_rate { struct gmin_subdev { struct v4l2_subdev *subdev; - int clock_num; enum clock_rate clock_src; - bool clock_on; struct clk *pmc_clk; struct gpio_desc *gpio0; struct gpio_desc *gpio1; @@ -75,11 +76,16 @@ struct gmin_subdev { unsigned int csi_lanes; enum atomisp_input_format csi_fmt; enum atomisp_bayer_order csi_bayer; + + bool clock_on; bool v1p8_on; bool v2p8_on; bool v1p2_on; bool v2p8_vcm_on; + int v1p8_gpio; + int v2p8_gpio; + u8 pwm_i2c_addr; /* For PMIC AXP */ @@ -90,9 +96,9 @@ struct gmin_subdev { static struct gmin_subdev gmin_subdevs[MAX_SUBDEVS]; /* ACPI HIDs for the PMICs that could be used by this driver */ -#define PMIC_ACPI_AXP "INT33F4:00" /* XPower AXP288 PMIC */ -#define PMIC_ACPI_TI "INT33F5:00" /* Dollar Cove TI PMIC */ -#define PMIC_ACPI_CRYSTALCOVE "INT33FD:00" /* Crystal Cove PMIC */ +#define PMIC_ACPI_AXP "INT33F4" /* XPower AXP288 PMIC */ +#define PMIC_ACPI_TI "INT33F5" /* Dollar Cove TI PMIC */ +#define PMIC_ACPI_CRYSTALCOVE "INT33FD" /* Crystal Cove PMIC */ #define PMIC_PLATFORM_TI "intel_soc_pmic_chtdc_ti" @@ -105,7 +111,7 @@ static enum { } pmic_id; static const char *pmic_name[] = { - [PMIC_UNSET] = "unset", + [PMIC_UNSET] = "ACPI device PM", [PMIC_REGULATOR] = "regulator driver", [PMIC_AXP] = "XPower AXP288 PMIC", [PMIC_TI] = "Dollar Cove TI PMIC", @@ -119,24 +125,6 @@ static const struct atomisp_platform_data pdata = { .subdevs = pdata_subdevs, }; -/* - * Something of a hack. The ECS E7 board drives camera 2.8v from an - * external regulator instead of the PMIC. There's a gmin_CamV2P8 - * config variable that specifies the GPIO to handle this particular - * case, but this needs a broader architecture for handling camera - * power. - */ -enum { V2P8_GPIO_UNSET = -2, V2P8_GPIO_NONE = -1 }; -static int v2p8_gpio = V2P8_GPIO_UNSET; - -/* - * Something of a hack. The CHT RVP board drives camera 1.8v from an - * external regulator instead of the PMIC just like ECS E7 board, see the - * comments above. - */ -enum { V1P8_GPIO_UNSET = -2, V1P8_GPIO_NONE = -1 }; -static int v1p8_gpio = V1P8_GPIO_UNSET; - static LIST_HEAD(vcm_devices); static DEFINE_MUTEX(vcm_lock); @@ -199,6 +187,8 @@ int atomisp_register_i2c_module(struct v4l2_subdev *subdev, * gmin_subdev struct is already initialized for us. */ gs = find_gmin_subdev(subdev); + if (!gs) + return -ENODEV; pdata.subdevs[i].type = type; pdata.subdevs[i].port = gs->csi_port; @@ -294,6 +284,7 @@ static struct gmin_cfg_var mrd7_vars[] = { {"INT33F8:00_CsiFmt", "13"}, {"INT33F8:00_CsiBayer", "0"}, {"INT33F8:00_CamClk", "0"}, + {"INT33F9:00_CamType", "1"}, {"INT33F9:00_CsiPort", "0"}, {"INT33F9:00_CsiLanes", "1"}, @@ -309,6 +300,7 @@ static struct gmin_cfg_var ecs7_vars[] = { {"INT33BE:00_CsiFmt", "13"}, {"INT33BE:00_CsiBayer", "2"}, {"INT33BE:00_CamClk", "0"}, + {"INT33F0:00_CsiPort", "0"}, {"INT33F0:00_CsiLanes", "1"}, {"INT33F0:00_CsiFmt", "13"}, @@ -322,6 +314,7 @@ static struct gmin_cfg_var i8880_vars[] = { {"XXOV2680:00_CsiPort", "1"}, {"XXOV2680:00_CsiLanes", "1"}, {"XXOV2680:00_CamClk", "0"}, + {"XXGC0310:00_CsiPort", "0"}, {"XXGC0310:00_CsiLanes", "1"}, {"XXGC0310:00_CamClk", "1"}, @@ -381,34 +374,27 @@ static const guid_t atomisp_dsm_guid = GUID_INIT(0xdc2f6c4f, 0x045b, 0x4f1d, #define GMIN_PMC_CLK_NAME 14 /* "pmc_plt_clk_[0..5]" */ static char gmin_pmc_clk_name[GMIN_PMC_CLK_NAME]; -static int gmin_i2c_match_one(struct device *dev, const void *data) -{ - const char *name = data; - struct i2c_client *client; - - if (dev->type != &i2c_client_type) - return 0; - - client = to_i2c_client(dev); - - return (!strcmp(name, client->name)); -} - static struct i2c_client *gmin_i2c_dev_exists(struct device *dev, char *name, struct i2c_client **client) { + struct acpi_device *adev; struct device *d; - while ((d = bus_find_device(&i2c_bus_type, NULL, name, - gmin_i2c_match_one))) { - *client = to_i2c_client(d); - dev_dbg(dev, "found '%s' at address 0x%02x, adapter %d\n", - (*client)->name, (*client)->addr, - (*client)->adapter->nr); - return *client; - } + adev = acpi_dev_get_first_match_dev(name, NULL, -1); + if (!adev) + return NULL; - return NULL; + d = bus_find_device_by_acpi_dev(&i2c_bus_type, adev); + acpi_dev_put(adev); + if (!d) + return NULL; + + *client = i2c_verify_client(d); + put_device(d); + + dev_dbg(dev, "found '%s' at address 0x%02x, adapter %d\n", + (*client)->name, (*client)->addr, (*client)->adapter->nr); + return *client; } static int gmin_i2c_write(struct device *dev, u16 i2c_addr, u8 reg, @@ -427,94 +413,222 @@ static int gmin_i2c_write(struct device *dev, u16 i2c_addr, u8 reg, "I2C write, addr: 0x%02x, reg: 0x%02x, value: 0x%02x, mask: 0x%02x\n", i2c_addr, reg, value, mask); - ret = intel_soc_pmic_exec_mipi_pmic_seq_element(i2c_addr, reg, - value, mask); - - if (ret == -EOPNOTSUPP) { + ret = intel_soc_pmic_exec_mipi_pmic_seq_element(i2c_addr, reg, value, mask); + if (ret == -EOPNOTSUPP) dev_err(dev, "ACPI didn't mapped the OpRegion needed to access I2C address 0x%02x.\n" - "Need to compile the Kernel using CONFIG_*_PMIC_OPREGION settings\n", + "Need to compile the kernel using CONFIG_*_PMIC_OPREGION settings\n", i2c_addr); - return ret; - } return ret; } -static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) +static int atomisp_get_acpi_power(struct device *dev) { - struct i2c_client *power = NULL, *client = v4l2_get_subdevdata(subdev); - struct acpi_device *adev; - acpi_handle handle; - struct device *dev; - int i, ret; + char name[5]; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_buffer b_name = { sizeof(name), name }; + union acpi_object *package, *element; + acpi_handle handle = ACPI_HANDLE(dev); + acpi_handle rhandle; + acpi_status status; + int clock_num = -1; + int i; - if (!client) - return NULL; + status = acpi_evaluate_object(handle, "_PR0", NULL, &buffer); + if (!ACPI_SUCCESS(status)) + return -1; - dev = &client->dev; + package = buffer.pointer; - handle = ACPI_HANDLE(dev); + if (!buffer.length || !package + || package->type != ACPI_TYPE_PACKAGE + || !package->package.count) + goto fail; - // FIXME: may need to release resources allocated by acpi_bus_get_device() - if (!handle || acpi_bus_get_device(handle, &adev)) { - dev_err(dev, "Error could not get ACPI device\n"); - return NULL; - } + for (i = 0; i < package->package.count; i++) { + element = &package->package.elements[i]; - dev_info(&client->dev, "%s: ACPI detected it on bus ID=%s, HID=%s\n", - __func__, acpi_device_bid(adev), acpi_device_hid(adev)); + if (element->type != ACPI_TYPE_LOCAL_REFERENCE) + continue; - if (!pmic_id) { - if (gmin_i2c_dev_exists(dev, PMIC_ACPI_TI, &power)) - pmic_id = PMIC_TI; - else if (gmin_i2c_dev_exists(dev, PMIC_ACPI_AXP, &power)) - pmic_id = PMIC_AXP; - else if (gmin_i2c_dev_exists(dev, PMIC_ACPI_CRYSTALCOVE, &power)) - pmic_id = PMIC_CRYSTALCOVE; - else - pmic_id = PMIC_REGULATOR; + rhandle = element->reference.handle; + if (!rhandle) + goto fail; + + acpi_get_name(rhandle, ACPI_SINGLE_NAME, &b_name); + + dev_dbg(dev, "Found PM resource '%s'\n", name); + if (strlen(name) == 4 && !strncmp(name, "CLK", 3)) { + if (name[3] >= '0' && name[3] <= '4') + clock_num = name[3] - '0'; +#if 0 + /* + * We could abort here, but let's parse all resources, + * as this is helpful for debugging purposes + */ + if (clock_num >= 0) + break; +#endif + } } - for (i = 0; i < MAX_SUBDEVS && gmin_subdevs[i].subdev; i++) - ; - if (i >= MAX_SUBDEVS) - return NULL; +fail: + ACPI_FREE(buffer.pointer); + + return clock_num; +} + +static u8 gmin_get_pmic_id_and_addr(struct device *dev) +{ + struct i2c_client *power; + static u8 pmic_i2c_addr; + + if (pmic_id) + return pmic_i2c_addr; + + if (gmin_i2c_dev_exists(dev, PMIC_ACPI_TI, &power)) + pmic_id = PMIC_TI; + else if (gmin_i2c_dev_exists(dev, PMIC_ACPI_AXP, &power)) + pmic_id = PMIC_AXP; + else if (gmin_i2c_dev_exists(dev, PMIC_ACPI_CRYSTALCOVE, &power)) + pmic_id = PMIC_CRYSTALCOVE; + else + pmic_id = PMIC_REGULATOR; + + pmic_i2c_addr = power ? power->addr : 0; + return pmic_i2c_addr; +} + +static int gmin_detect_pmic(struct v4l2_subdev *subdev) +{ + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct device *dev = &client->dev; + u8 pmic_i2c_addr; + + pmic_i2c_addr = gmin_get_pmic_id_and_addr(dev); + dev_info(dev, "gmin: power management provided via %s (i2c addr 0x%02x)\n", + pmic_name[pmic_id], pmic_i2c_addr); + return pmic_i2c_addr; +} + +static int gmin_subdev_add(struct gmin_subdev *gs) +{ + struct i2c_client *client = v4l2_get_subdevdata(gs->subdev); + struct device *dev = &client->dev; + struct acpi_device *adev = ACPI_COMPANION(dev); + int ret, clock_num = -1; + + dev_info(dev, "%s: ACPI path is %pfw\n", __func__, dev_fwnode(dev)); + + /*WA:CHT requires XTAL clock as PLL is not stable.*/ + gs->clock_src = gmin_get_var_int(dev, false, "ClkSrc", + VLV2_CLK_PLL_19P2MHZ); + + gs->csi_port = gmin_get_var_int(dev, false, "CsiPort", 0); + gs->csi_lanes = gmin_get_var_int(dev, false, "CsiLanes", 1); + + gs->gpio0 = gpiod_get_index(dev, NULL, 0, GPIOD_OUT_LOW); + if (IS_ERR(gs->gpio0)) + gs->gpio0 = NULL; + else + dev_info(dev, "will handle gpio0 via ACPI\n"); + + gs->gpio1 = gpiod_get_index(dev, NULL, 1, GPIOD_OUT_LOW); + if (IS_ERR(gs->gpio1)) + gs->gpio1 = NULL; + else + dev_info(dev, "will handle gpio1 via ACPI\n"); + + /* + * Those are used only when there is an external regulator apart + * from the PMIC that would be providing power supply, like on the + * two cases below: + * + * The ECS E7 board drives camera 2.8v from an external regulator + * instead of the PMIC. There's a gmin_CamV2P8 config variable + * that specifies the GPIO to handle this particular case, + * but this needs a broader architecture for handling camera power. + * + * The CHT RVP board drives camera 1.8v from an* external regulator + * instead of the PMIC just like ECS E7 board. + */ - if (power) { - gmin_subdevs[i].pwm_i2c_addr = power->addr; + gs->v1p8_gpio = gmin_get_var_int(dev, true, "V1P8GPIO", -1); + gs->v2p8_gpio = gmin_get_var_int(dev, true, "V2P8GPIO", -1); + + /* + * FIXME: + * + * The ACPI handling code checks for the _PR? tables in order to + * know what is required to switch the device from power state + * D0 (_PR0) up to D3COLD (_PR3). + * + * The adev->flags.power_manageable is set to true if the device + * has a _PR0 table, which can be checked by calling + * acpi_device_power_manageable(adev). + * + * However, this only says that the device can be set to power off + * mode. + * + * At least on the DSDT tables we've seen so far, there's no _PR3, + * nor _PS3 (which would have a somewhat similar effect). + * So, using ACPI for power management won't work, except if adding + * an ACPI override logic somewhere. + * + * So, at least for the existing devices we know, the check below + * will always be false. + */ + if (acpi_device_can_wakeup(adev) && + acpi_device_can_poweroff(adev)) { dev_info(dev, - "gmin: power management provided via %s (i2c addr 0x%02x)\n", - pmic_name[pmic_id], power->addr); - } else { - dev_info(dev, "gmin: power management provided via %s\n", - pmic_name[pmic_id]); + "gmin: power management provided via device PM\n"); + return 0; } - gmin_subdevs[i].subdev = subdev; - gmin_subdevs[i].clock_num = gmin_get_var_int(dev, false, "CamClk", 0); - /*WA:CHT requires XTAL clock as PLL is not stable.*/ - gmin_subdevs[i].clock_src = gmin_get_var_int(dev, false, "ClkSrc", - VLV2_CLK_PLL_19P2MHZ); - gmin_subdevs[i].csi_port = gmin_get_var_int(dev, false, "CsiPort", 0); - gmin_subdevs[i].csi_lanes = gmin_get_var_int(dev, false, "CsiLanes", 1); + /* + * The code below is here due to backward compatibility with devices + * whose ACPI BIOS may not contain everything that would be needed + * in order to set clocks and do power management. + */ + + /* + * According with : + * https://github.com/projectceladon/hardware-intel-kernelflinger/blob/master/doc/fastboot.md + * + * The "CamClk" EFI var is set via fastboot on some Android devices, + * and seems to contain the number of the clock used to feed the + * sensor. + * + * On systems with a proper ACPI table, this is given via the _PR0 + * power resource table. The logic below should first check if there + * is a power resource already, falling back to the EFI vars detection + * otherwise. + */ - /* get PMC clock with clock framework */ - snprintf(gmin_pmc_clk_name, - sizeof(gmin_pmc_clk_name), - "%s_%d", "pmc_plt_clk", gmin_subdevs[i].clock_num); + /* Try first to use ACPI to get the clock resource */ + if (acpi_device_power_manageable(adev)) + clock_num = atomisp_get_acpi_power(dev); - gmin_subdevs[i].pmc_clk = devm_clk_get(dev, gmin_pmc_clk_name); - if (IS_ERR(gmin_subdevs[i].pmc_clk)) { - ret = PTR_ERR(gmin_subdevs[i].pmc_clk); + /* Fall-back use EFI and/or DMI match */ + if (clock_num < 0) + clock_num = gmin_get_var_int(dev, false, "CamClk", 0); - dev_err(dev, - "Failed to get clk from %s : %d\n", - gmin_pmc_clk_name, - ret); + if (clock_num < 0 || clock_num > MAX_CLK_COUNT) { + dev_err(dev, "Invalid clock number\n"); + return -EINVAL; + } - return NULL; + snprintf(gmin_pmc_clk_name, sizeof(gmin_pmc_clk_name), + "%s_%d", "pmc_plt_clk", clock_num); + + gs->pmc_clk = devm_clk_get(dev, gmin_pmc_clk_name); + if (IS_ERR(gs->pmc_clk)) { + ret = PTR_ERR(gs->pmc_clk); + dev_err(dev, "Failed to get clk from %s: %d\n", gmin_pmc_clk_name, ret); + return ret; } + dev_info(dev, "Will use CLK%d (%s)\n", clock_num, gmin_pmc_clk_name); /* * The firmware might enable the clock at @@ -526,25 +640,17 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) * to disable a clock that has not been enabled, * we need to enable the clock first. */ - ret = clk_prepare_enable(gmin_subdevs[i].pmc_clk); + ret = clk_prepare_enable(gs->pmc_clk); if (!ret) - clk_disable_unprepare(gmin_subdevs[i].pmc_clk); - - gmin_subdevs[i].gpio0 = gpiod_get_index(dev, NULL, 0, GPIOD_OUT_LOW); - if (IS_ERR(gmin_subdevs[i].gpio0)) - gmin_subdevs[i].gpio0 = NULL; - - gmin_subdevs[i].gpio1 = gpiod_get_index(dev, NULL, 1, GPIOD_OUT_LOW); - if (IS_ERR(gmin_subdevs[i].gpio1)) - gmin_subdevs[i].gpio1 = NULL; + clk_disable_unprepare(gs->pmc_clk); switch (pmic_id) { case PMIC_REGULATOR: - gmin_subdevs[i].v1p8_reg = regulator_get(dev, "V1P8SX"); - gmin_subdevs[i].v2p8_reg = regulator_get(dev, "V2P8SX"); + gs->v1p8_reg = regulator_get(dev, "V1P8SX"); + gs->v2p8_reg = regulator_get(dev, "V2P8SX"); - gmin_subdevs[i].v1p2_reg = regulator_get(dev, "V1P2A"); - gmin_subdevs[i].v2p8_vcm_reg = regulator_get(dev, "VPROG4B"); + gs->v1p2_reg = regulator_get(dev, "V1P2A"); + gs->v2p8_vcm_reg = regulator_get(dev, "VPROG4B"); /* Note: ideally we would initialize v[12]p8_on to the * output of regulator_is_enabled(), but sadly that @@ -556,32 +662,31 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) break; case PMIC_AXP: - gmin_subdevs[i].eldo1_1p8v = gmin_get_var_int(dev, false, - "eldo1_1p8v", - ELDO1_1P8V); - gmin_subdevs[i].eldo1_sel_reg = gmin_get_var_int(dev, false, - "eldo1_sel_reg", - ELDO1_SEL_REG); - gmin_subdevs[i].eldo1_ctrl_shift = gmin_get_var_int(dev, false, - "eldo1_ctrl_shift", - ELDO1_CTRL_SHIFT); - gmin_subdevs[i].eldo2_1p8v = gmin_get_var_int(dev, false, - "eldo2_1p8v", - ELDO2_1P8V); - gmin_subdevs[i].eldo2_sel_reg = gmin_get_var_int(dev, false, - "eldo2_sel_reg", - ELDO2_SEL_REG); - gmin_subdevs[i].eldo2_ctrl_shift = gmin_get_var_int(dev, false, - "eldo2_ctrl_shift", - ELDO2_CTRL_SHIFT); - gmin_subdevs[i].pwm_i2c_addr = power->addr; + gs->eldo1_1p8v = gmin_get_var_int(dev, false, + "eldo1_1p8v", + ELDO1_1P8V); + gs->eldo1_sel_reg = gmin_get_var_int(dev, false, + "eldo1_sel_reg", + ELDO1_SEL_REG); + gs->eldo1_ctrl_shift = gmin_get_var_int(dev, false, + "eldo1_ctrl_shift", + ELDO1_CTRL_SHIFT); + gs->eldo2_1p8v = gmin_get_var_int(dev, false, + "eldo2_1p8v", + ELDO2_1P8V); + gs->eldo2_sel_reg = gmin_get_var_int(dev, false, + "eldo2_sel_reg", + ELDO2_SEL_REG); + gs->eldo2_ctrl_shift = gmin_get_var_int(dev, false, + "eldo2_ctrl_shift", + ELDO2_CTRL_SHIFT); break; default: break; } - return &gmin_subdevs[i]; + return 0; } static struct gmin_subdev *find_gmin_subdev(struct v4l2_subdev *subdev) @@ -591,7 +696,17 @@ static struct gmin_subdev *find_gmin_subdev(struct v4l2_subdev *subdev) for (i = 0; i < MAX_SUBDEVS; i++) if (gmin_subdevs[i].subdev == subdev) return &gmin_subdevs[i]; - return gmin_subdev_add(subdev); + return NULL; +} + +static struct gmin_subdev *find_free_gmin_subdev_slot(void) +{ + unsigned int i; + + for (i = 0; i < MAX_SUBDEVS; i++) + if (gmin_subdevs[i].subdev == NULL) + return &gmin_subdevs[i]; + return NULL; } static int axp_regulator_set(struct device *dev, struct gmin_subdev *gs, @@ -700,32 +815,24 @@ static int gmin_v1p8_ctrl(struct v4l2_subdev *subdev, int on) { struct gmin_subdev *gs = find_gmin_subdev(subdev); int ret; - struct device *dev; - struct i2c_client *client = v4l2_get_subdevdata(subdev); int value; - dev = &client->dev; - - if (v1p8_gpio == V1P8_GPIO_UNSET) { - v1p8_gpio = gmin_get_var_int(dev, true, - "V1P8GPIO", V1P8_GPIO_NONE); - if (v1p8_gpio != V1P8_GPIO_NONE) { - pr_info("atomisp_gmin_platform: 1.8v power on GPIO %d\n", - v1p8_gpio); - ret = gpio_request(v1p8_gpio, "camera_v1p8_en"); - if (!ret) - ret = gpio_direction_output(v1p8_gpio, 0); - if (ret) - pr_err("V1P8 GPIO initialization failed\n"); - } + if (gs->v1p8_gpio >= 0) { + pr_info("atomisp_gmin_platform: 1.8v power on GPIO %d\n", + gs->v1p8_gpio); + ret = gpio_request(gs->v1p8_gpio, "camera_v1p8_en"); + if (!ret) + ret = gpio_direction_output(gs->v1p8_gpio, 0); + if (ret) + pr_err("V1P8 GPIO initialization failed\n"); } if (!gs || gs->v1p8_on == on) return 0; gs->v1p8_on = on; - if (v1p8_gpio >= 0) - gpio_set_value(v1p8_gpio, on); + if (gs->v1p8_gpio >= 0) + gpio_set_value(gs->v1p8_gpio, on); if (gs->v1p8_reg) { regulator_set_voltage(gs->v1p8_reg, 1800000, 1800000); @@ -762,32 +869,24 @@ static int gmin_v2p8_ctrl(struct v4l2_subdev *subdev, int on) { struct gmin_subdev *gs = find_gmin_subdev(subdev); int ret; - struct device *dev; - struct i2c_client *client = v4l2_get_subdevdata(subdev); int value; - dev = &client->dev; - - if (v2p8_gpio == V2P8_GPIO_UNSET) { - v2p8_gpio = gmin_get_var_int(dev, true, - "V2P8GPIO", V2P8_GPIO_NONE); - if (v2p8_gpio != V2P8_GPIO_NONE) { - pr_info("atomisp_gmin_platform: 2.8v power on GPIO %d\n", - v2p8_gpio); - ret = gpio_request(v2p8_gpio, "camera_v2p8"); - if (!ret) - ret = gpio_direction_output(v2p8_gpio, 0); - if (ret) - pr_err("V2P8 GPIO initialization failed\n"); - } + if (gs->v2p8_gpio >= 0) { + pr_info("atomisp_gmin_platform: 2.8v power on GPIO %d\n", + gs->v2p8_gpio); + ret = gpio_request(gs->v2p8_gpio, "camera_v2p8"); + if (!ret) + ret = gpio_direction_output(gs->v2p8_gpio, 0); + if (ret) + pr_err("V2P8 GPIO initialization failed\n"); } if (!gs || gs->v2p8_on == on) return 0; gs->v2p8_on = on; - if (v2p8_gpio >= 0) - gpio_set_value(v2p8_gpio, on); + if (gs->v2p8_gpio >= 0) + gpio_set_value(gs->v2p8_gpio, on); if (gs->v2p8_reg) { regulator_set_voltage(gs->v2p8_reg, 2900000, 2900000); @@ -819,6 +918,37 @@ static int gmin_v2p8_ctrl(struct v4l2_subdev *subdev, int on) return -EINVAL; } +static int gmin_acpi_pm_ctrl(struct v4l2_subdev *subdev, int on) +{ + int ret = 0; + struct gmin_subdev *gs = find_gmin_subdev(subdev); + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct acpi_device *adev = ACPI_COMPANION(&client->dev); + + /* Use the ACPI power management to control it */ + on = !!on; + if (gs->clock_on == on) + return 0; + + dev_dbg(subdev->dev, "Setting power state to %s\n", + on ? "on" : "off"); + + if (on) + ret = acpi_device_set_power(adev, + ACPI_STATE_D0); + else + ret = acpi_device_set_power(adev, + ACPI_STATE_D3_COLD); + + if (!ret) + gs->clock_on = on; + else + dev_err(subdev->dev, "Couldn't set power state to %s\n", + on ? "on" : "off"); + + return ret; +} + static int gmin_flisclk_ctrl(struct v4l2_subdev *subdev, int on) { int ret = 0; @@ -884,7 +1014,7 @@ static struct camera_vcm_control *gmin_get_vcm_ctrl(struct v4l2_subdev *subdev, return NULL; } -static struct camera_sensor_platform_data gmin_plat = { +static struct camera_sensor_platform_data pmic_gmin_plat = { .gpio0_ctrl = gmin_gpio0_ctrl, .gpio1_ctrl = gmin_gpio1_ctrl, .v1p8_ctrl = gmin_v1p8_ctrl, @@ -895,17 +1025,36 @@ static struct camera_sensor_platform_data gmin_plat = { .get_vcm_ctrl = gmin_get_vcm_ctrl, }; +static struct camera_sensor_platform_data acpi_gmin_plat = { + .gpio0_ctrl = gmin_gpio0_ctrl, + .gpio1_ctrl = gmin_gpio1_ctrl, + .v1p8_ctrl = gmin_acpi_pm_ctrl, + .v2p8_ctrl = gmin_acpi_pm_ctrl, + .v1p2_ctrl = gmin_acpi_pm_ctrl, + .flisclk_ctrl = gmin_acpi_pm_ctrl, + .csi_cfg = gmin_csi_cfg, + .get_vcm_ctrl = gmin_get_vcm_ctrl, +}; + struct camera_sensor_platform_data *gmin_camera_platform_data( struct v4l2_subdev *subdev, enum atomisp_input_format csi_format, enum atomisp_bayer_order csi_bayer) { - struct gmin_subdev *gs = find_gmin_subdev(subdev); + u8 pmic_i2c_addr = gmin_detect_pmic(subdev); + struct gmin_subdev *gs; + gs = find_free_gmin_subdev_slot(); + gs->subdev = subdev; gs->csi_fmt = csi_format; gs->csi_bayer = csi_bayer; + gs->pwm_i2c_addr = pmic_i2c_addr; - return &gmin_plat; + gmin_subdev_add(gs); + if (gs->pmc_clk) + return &pmic_gmin_plat; + else + return &acpi_gmin_plat; } EXPORT_SYMBOL_GPL(gmin_camera_platform_data); @@ -957,12 +1106,28 @@ static int gmin_get_config_dsm_var(struct device *dev, union acpi_object *obj, *cur = NULL; int i; + /* + * The data reported by "CamClk" seems to be either 0 or 1 at the + * _DSM table. + * + * At the ACPI tables we looked so far, this is not related to the + * actual clock source for the sensor, which is given by the + * _PR0 ACPI table. So, ignore it, as otherwise this will be + * set to a wrong value. + */ + if (!strcmp(var, "CamClk")) + return -EINVAL; + obj = acpi_evaluate_dsm(handle, &atomisp_dsm_guid, 0, 0, NULL); if (!obj) { dev_info_once(dev, "Didn't find ACPI _DSM table.\n"); return -EINVAL; } + /* Return on unexpected object type */ + if (obj->type != ACPI_TYPE_PACKAGE) + return -EINVAL; + #if 0 /* Just for debugging purposes */ for (i = 0; i < obj->package.count; i++) { union acpi_object *cur = &obj->package.elements[i]; @@ -1155,10 +1320,10 @@ EXPORT_SYMBOL_GPL(camera_sensor_csi); * trying. The driver itself does direct calls to the PUNIT to manage * ISP power. */ -static void isp_pm_cap_fixup(struct pci_dev *dev) +static void isp_pm_cap_fixup(struct pci_dev *pdev) { - dev_info(&dev->dev, "Disabling PCI power management on camera ISP\n"); - dev->pm_cap = 0; + dev_info(&pdev->dev, "Disabling PCI power management on camera ISP\n"); + pdev->pm_cap = 0; } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0f38, isp_pm_cap_fixup); diff --git a/drivers/staging/media/atomisp/pci/atomisp_internal.h b/drivers/staging/media/atomisp/pci/atomisp_internal.h index ff3becd4111090..c01db10bb7355d 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_internal.h +++ b/drivers/staging/media/atomisp/pci/atomisp_internal.h @@ -216,12 +216,12 @@ struct atomisp_sw_contex { * ci device struct */ struct atomisp_device { - struct pci_dev *pdev; struct device *dev; struct v4l2_device v4l2_dev; struct media_device media_dev; struct atomisp_platform_data *pdata; void *mmu_l1_base; + void __iomem *base; const struct firmware *firmware; struct pm_qos_request pm_qos; diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c index 9404a678fa6fe4..f8d616f08b510f 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c +++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c @@ -549,8 +549,7 @@ static int atomisp_querycap(struct file *file, void *fh, strscpy(cap->driver, DRIVER, sizeof(cap->driver)); strscpy(cap->card, CARD, sizeof(cap->card)); - snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", - pci_name(isp->pdev)); + snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", dev_name(isp->dev)); return 0; } @@ -1635,6 +1634,7 @@ static int atomisp_streamon(struct file *file, void *fh, struct atomisp_video_pipe *pipe = atomisp_to_video_pipe(vdev); struct atomisp_sub_device *asd = pipe->asd; struct atomisp_device *isp = video_get_drvdata(vdev); + struct pci_dev *pdev = to_pci_dev(isp->dev); enum ia_css_pipe_id css_pipe_id; unsigned int sensor_start_stream; unsigned int wdt_duration = ATOMISP_ISP_TIMEOUT_DURATION; @@ -1844,9 +1844,8 @@ start_sensor: /* Enable the CSI interface on ANN B0/K0 */ if (isp->media_dev.hw_revision >= ((ATOMISP_HW_REVISION_ISP2401 << ATOMISP_HW_REVISION_SHIFT) | ATOMISP_HW_STEPPING_B0)) { - pci_write_config_word(isp->pdev, MRFLD_PCI_CSI_CONTROL, - isp->saved_regs.csi_control | - MRFLD_PCI_CSI_CONTROL_CSI_READY); + pci_write_config_word(pdev, MRFLD_PCI_CSI_CONTROL, + isp->saved_regs.csi_control | MRFLD_PCI_CSI_CONTROL_CSI_READY); } /* stream on the sensor */ @@ -1891,6 +1890,7 @@ int __atomisp_streamoff(struct file *file, void *fh, enum v4l2_buf_type type) { struct video_device *vdev = video_devdata(file); struct atomisp_device *isp = video_get_drvdata(vdev); + struct pci_dev *pdev = to_pci_dev(isp->dev); struct atomisp_video_pipe *pipe = atomisp_to_video_pipe(vdev); struct atomisp_sub_device *asd = pipe->asd; struct atomisp_video_pipe *capture_pipe = NULL; @@ -2076,9 +2076,8 @@ stopsensor: /* Disable the CSI interface on ANN B0/K0 */ if (isp->media_dev.hw_revision >= ((ATOMISP_HW_REVISION_ISP2401 << ATOMISP_HW_REVISION_SHIFT) | ATOMISP_HW_STEPPING_B0)) { - pci_write_config_word(isp->pdev, MRFLD_PCI_CSI_CONTROL, - isp->saved_regs.csi_control & - ~MRFLD_PCI_CSI_CONTROL_CSI_READY); + pci_write_config_word(pdev, MRFLD_PCI_CSI_CONTROL, + isp->saved_regs.csi_control & ~MRFLD_PCI_CSI_CONTROL_CSI_READY); } if (atomisp_freq_scaling(isp, ATOMISP_DFS_MODE_LOW, false)) @@ -2111,8 +2110,8 @@ stopsensor: } /* disable PUNIT/ISP acknowlede/handshake - SRSE=3 */ - pci_write_config_dword(isp->pdev, PCI_I_CONTROL, isp->saved_regs.i_control | - MRFLD_PCI_I_CONTROL_SRSE_RESET_MASK); + pci_write_config_dword(pdev, PCI_I_CONTROL, + isp->saved_regs.i_control | MRFLD_PCI_I_CONTROL_SRSE_RESET_MASK); dev_err(isp->dev, "atomisp_reset"); atomisp_reset(isp); for (i = 0; i < isp->num_of_streams; i++) { diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c index d36809a0182c05..a000a1e316f78d 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c +++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c @@ -127,8 +127,6 @@ MODULE_PARM_DESC(pad_h, "extra data for ISP processing"); struct device *atomisp_dev; -void __iomem *atomisp_io_base; - static const struct atomisp_freq_scaling_rule dfs_rules_merr[] = { { .width = ISP_FREQ_RULE_ANY, @@ -512,30 +510,27 @@ void atomisp_acc_unregister(struct atomisp_acc_pipe *video) static int atomisp_save_iunit_reg(struct atomisp_device *isp) { - struct pci_dev *dev = isp->pdev; + struct pci_dev *pdev = to_pci_dev(isp->dev); dev_dbg(isp->dev, "%s\n", __func__); - pci_read_config_word(dev, PCI_COMMAND, &isp->saved_regs.pcicmdsts); + pci_read_config_word(pdev, PCI_COMMAND, &isp->saved_regs.pcicmdsts); /* isp->saved_regs.ispmmadr is set from the atomisp_pci_probe() */ - pci_read_config_dword(dev, PCI_MSI_CAPID, &isp->saved_regs.msicap); - pci_read_config_dword(dev, PCI_MSI_ADDR, &isp->saved_regs.msi_addr); - pci_read_config_word(dev, PCI_MSI_DATA, &isp->saved_regs.msi_data); - pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &isp->saved_regs.intr); - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, - &isp->saved_regs.interrupt_control); - - pci_read_config_dword(dev, MRFLD_PCI_PMCS, - &isp->saved_regs.pmcs); + pci_read_config_dword(pdev, PCI_MSI_CAPID, &isp->saved_regs.msicap); + pci_read_config_dword(pdev, PCI_MSI_ADDR, &isp->saved_regs.msi_addr); + pci_read_config_word(pdev, PCI_MSI_DATA, &isp->saved_regs.msi_data); + pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &isp->saved_regs.intr); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &isp->saved_regs.interrupt_control); + + pci_read_config_dword(pdev, MRFLD_PCI_PMCS, &isp->saved_regs.pmcs); /* Ensure read/write combining is enabled. */ - pci_read_config_dword(dev, PCI_I_CONTROL, - &isp->saved_regs.i_control); + pci_read_config_dword(pdev, PCI_I_CONTROL, &isp->saved_regs.i_control); isp->saved_regs.i_control |= MRFLD_PCI_I_CONTROL_ENABLE_READ_COMBINING | MRFLD_PCI_I_CONTROL_ENABLE_WRITE_COMBINING; - pci_read_config_dword(dev, MRFLD_PCI_CSI_ACCESS_CTRL_VIOL, + pci_read_config_dword(pdev, MRFLD_PCI_CSI_ACCESS_CTRL_VIOL, &isp->saved_regs.csi_access_viol); - pci_read_config_dword(dev, MRFLD_PCI_CSI_RCOMP_CONTROL, + pci_read_config_dword(pdev, MRFLD_PCI_CSI_RCOMP_CONTROL, &isp->saved_regs.csi_rcomp_config); /* * Hardware bugs require setting CSI_HS_OVR_CLK_GATE_ON_UPDATE. @@ -545,65 +540,58 @@ static int atomisp_save_iunit_reg(struct atomisp_device *isp) * is missed, and IUNIT can hang. * For both issues, setting this bit is a workaround. */ - isp->saved_regs.csi_rcomp_config |= - MRFLD_PCI_CSI_HS_OVR_CLK_GATE_ON_UPDATE; - pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, + isp->saved_regs.csi_rcomp_config |= MRFLD_PCI_CSI_HS_OVR_CLK_GATE_ON_UPDATE; + pci_read_config_dword(pdev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, &isp->saved_regs.csi_afe_dly); - pci_read_config_dword(dev, MRFLD_PCI_CSI_CONTROL, + pci_read_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, &isp->saved_regs.csi_control); if (isp->media_dev.hw_revision >= (ATOMISP_HW_REVISION_ISP2401 << ATOMISP_HW_REVISION_SHIFT)) - isp->saved_regs.csi_control |= - MRFLD_PCI_CSI_CONTROL_PARPATHEN; + isp->saved_regs.csi_control |= MRFLD_PCI_CSI_CONTROL_PARPATHEN; /* * On CHT CSI_READY bit should be enabled before stream on */ if (IS_CHT && (isp->media_dev.hw_revision >= ((ATOMISP_HW_REVISION_ISP2401 << ATOMISP_HW_REVISION_SHIFT) | ATOMISP_HW_STEPPING_B0))) - isp->saved_regs.csi_control |= - MRFLD_PCI_CSI_CONTROL_CSI_READY; - pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_RCOMP_CONTROL, + isp->saved_regs.csi_control |= MRFLD_PCI_CSI_CONTROL_CSI_READY; + pci_read_config_dword(pdev, MRFLD_PCI_CSI_AFE_RCOMP_CONTROL, &isp->saved_regs.csi_afe_rcomp_config); - pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_HS_CONTROL, + pci_read_config_dword(pdev, MRFLD_PCI_CSI_AFE_HS_CONTROL, &isp->saved_regs.csi_afe_hs_control); - pci_read_config_dword(dev, MRFLD_PCI_CSI_DEADLINE_CONTROL, + pci_read_config_dword(pdev, MRFLD_PCI_CSI_DEADLINE_CONTROL, &isp->saved_regs.csi_deadline_control); return 0; } static int __maybe_unused atomisp_restore_iunit_reg(struct atomisp_device *isp) { - struct pci_dev *dev = isp->pdev; + struct pci_dev *pdev = to_pci_dev(isp->dev); dev_dbg(isp->dev, "%s\n", __func__); - pci_write_config_word(dev, PCI_COMMAND, isp->saved_regs.pcicmdsts); - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, - isp->saved_regs.ispmmadr); - pci_write_config_dword(dev, PCI_MSI_CAPID, isp->saved_regs.msicap); - pci_write_config_dword(dev, PCI_MSI_ADDR, isp->saved_regs.msi_addr); - pci_write_config_word(dev, PCI_MSI_DATA, isp->saved_regs.msi_data); - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, isp->saved_regs.intr); - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, - isp->saved_regs.interrupt_control); - pci_write_config_dword(dev, PCI_I_CONTROL, - isp->saved_regs.i_control); - - pci_write_config_dword(dev, MRFLD_PCI_PMCS, - isp->saved_regs.pmcs); - pci_write_config_dword(dev, MRFLD_PCI_CSI_ACCESS_CTRL_VIOL, + pci_write_config_word(pdev, PCI_COMMAND, isp->saved_regs.pcicmdsts); + pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, isp->saved_regs.ispmmadr); + pci_write_config_dword(pdev, PCI_MSI_CAPID, isp->saved_regs.msicap); + pci_write_config_dword(pdev, PCI_MSI_ADDR, isp->saved_regs.msi_addr); + pci_write_config_word(pdev, PCI_MSI_DATA, isp->saved_regs.msi_data); + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, isp->saved_regs.intr); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, isp->saved_regs.interrupt_control); + pci_write_config_dword(pdev, PCI_I_CONTROL, isp->saved_regs.i_control); + + pci_write_config_dword(pdev, MRFLD_PCI_PMCS, isp->saved_regs.pmcs); + pci_write_config_dword(pdev, MRFLD_PCI_CSI_ACCESS_CTRL_VIOL, isp->saved_regs.csi_access_viol); - pci_write_config_dword(dev, MRFLD_PCI_CSI_RCOMP_CONTROL, + pci_write_config_dword(pdev, MRFLD_PCI_CSI_RCOMP_CONTROL, isp->saved_regs.csi_rcomp_config); - pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, + pci_write_config_dword(pdev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, isp->saved_regs.csi_afe_dly); - pci_write_config_dword(dev, MRFLD_PCI_CSI_CONTROL, + pci_write_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, isp->saved_regs.csi_control); - pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_RCOMP_CONTROL, + pci_write_config_dword(pdev, MRFLD_PCI_CSI_AFE_RCOMP_CONTROL, isp->saved_regs.csi_afe_rcomp_config); - pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_HS_CONTROL, + pci_write_config_dword(pdev, MRFLD_PCI_CSI_AFE_HS_CONTROL, isp->saved_regs.csi_afe_hs_control); - pci_write_config_dword(dev, MRFLD_PCI_CSI_DEADLINE_CONTROL, + pci_write_config_dword(pdev, MRFLD_PCI_CSI_DEADLINE_CONTROL, isp->saved_regs.csi_deadline_control); /* @@ -619,7 +607,7 @@ static int __maybe_unused atomisp_restore_iunit_reg(struct atomisp_device *isp) static int atomisp_mrfld_pre_power_down(struct atomisp_device *isp) { - struct pci_dev *dev = isp->pdev; + struct pci_dev *pdev = to_pci_dev(isp->dev); u32 irq; unsigned long flags; @@ -635,11 +623,11 @@ static int atomisp_mrfld_pre_power_down(struct atomisp_device *isp) * So, here we need to check if there is any pending * IRQ, if so, waiting for it to be served */ - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq); irq = irq & 1 << INTR_IIR; - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, irq); - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq); if (!(irq & (1 << INTR_IIR))) goto done; @@ -652,11 +640,11 @@ static int atomisp_mrfld_pre_power_down(struct atomisp_device *isp) spin_unlock_irqrestore(&isp->lock, flags); return -EAGAIN; } else { - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq); irq = irq & 1 << INTR_IIR; - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, irq); - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq); if (!(irq & (1 << INTR_IIR))) { atomisp_css2_hw_store_32(MRFLD_INTR_ENABLE_REG, 0x0); goto done; @@ -675,11 +663,11 @@ done: * to IIR. It could block subsequent interrupt messages. * HW sighting:4568410. */ - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq); irq &= ~(1 << INTR_IER); - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, irq); - atomisp_msi_irq_uninit(isp, dev); + atomisp_msi_irq_uninit(isp); atomisp_freq_scaling(isp, ATOMISP_DFS_MODE_LOW, true); spin_unlock_irqrestore(&isp->lock, flags); @@ -755,7 +743,7 @@ static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable) /* Wait until ISPSSPM0 bit[25:24] shows the right value */ iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, MRFLD_ISPSSPM0, &tmp); - tmp = (tmp & MRFLD_ISPSSPM0_ISPSSC_MASK) >> MRFLD_ISPSSPM0_ISPSSS_OFFSET; + tmp = (tmp >> MRFLD_ISPSSPM0_ISPSSS_OFFSET) & MRFLD_ISPSSPM0_ISPSSC_MASK; if (tmp == val) { trace_ipu_cstate(enable); return 0; @@ -778,15 +766,13 @@ static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable) /* Workaround for pmu_nc_set_power_state not ready in MRFLD */ int atomisp_mrfld_power_down(struct atomisp_device *isp) { -// FIXME: at least with ISP2401, enabling this code causes the driver to break - return 0 && atomisp_mrfld_power(isp, false); + return atomisp_mrfld_power(isp, false); } /* Workaround for pmu_nc_set_power_state not ready in MRFLD */ int atomisp_mrfld_power_up(struct atomisp_device *isp) { -// FIXME: at least with ISP2401, enabling this code causes the driver to break - return 0 && atomisp_mrfld_power(isp, true); + return atomisp_mrfld_power(isp, true); } int atomisp_runtime_suspend(struct device *dev) @@ -902,6 +888,7 @@ static int __maybe_unused atomisp_resume(struct device *dev) int atomisp_csi_lane_config(struct atomisp_device *isp) { + struct pci_dev *pdev = to_pci_dev(isp->dev); static const struct { u8 code; u8 lanes[MRFLD_PORT_NUM]; @@ -1003,7 +990,7 @@ int atomisp_csi_lane_config(struct atomisp_device *isp) return -EINVAL; } - pci_read_config_dword(isp->pdev, MRFLD_PCI_CSI_CONTROL, &csi_control); + pci_read_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, &csi_control); csi_control &= ~port_config_mask; csi_control |= (portconfigs[i].code << MRFLD_PORT_CONFIGCODE_SHIFT) | (portconfigs[i].lanes[0] ? 0 : (1 << MRFLD_PORT1_ENABLE_SHIFT)) @@ -1013,7 +1000,7 @@ int atomisp_csi_lane_config(struct atomisp_device *isp) | (((1 << portconfigs[i].lanes[1]) - 1) << MRFLD_PORT2_LANES_SHIFT) | (((1 << portconfigs[i].lanes[2]) - 1) << port3_lanes_shift); - pci_write_config_dword(isp->pdev, MRFLD_PCI_CSI_CONTROL, csi_control); + pci_write_config_dword(pdev, MRFLD_PCI_CSI_CONTROL, csi_control); dev_dbg(isp->dev, "%s: the portconfig is %d-%d-%d, CSI_CONTROL is 0x%08X\n", @@ -1440,8 +1427,7 @@ atomisp_load_firmware(struct atomisp_device *isp) * Check for flags the driver was compiled with against the PCI * device. Always returns true on other than ISP 2400. */ -static bool is_valid_device(struct pci_dev *dev, - const struct pci_device_id *id) +static bool is_valid_device(struct pci_dev *pdev, const struct pci_device_id *id) { unsigned int a0_max_id = 0; const char *name; @@ -1465,14 +1451,14 @@ static bool is_valid_device(struct pci_dev *dev, name = "Cherrytrail"; break; default: - dev_err(&dev->dev, "%s: unknown device ID %x04:%x04\n", + dev_err(&pdev->dev, "%s: unknown device ID %x04:%x04\n", product, id->vendor, id->device); return false; } - if (dev->revision <= ATOMISP_PCI_REV_BYT_A0_MAX) { - dev_err(&dev->dev, "%s revision %d is not unsupported\n", - name, dev->revision); + if (pdev->revision <= ATOMISP_PCI_REV_BYT_A0_MAX) { + dev_err(&pdev->dev, "%s revision %d is not unsupported\n", + name, pdev->revision); return false; } @@ -1483,22 +1469,20 @@ static bool is_valid_device(struct pci_dev *dev, #if defined(ISP2400) if (IS_ISP2401) { - dev_err(&dev->dev, "Support for %s (ISP2401) was disabled at compile time\n", + dev_err(&pdev->dev, "Support for %s (ISP2401) was disabled at compile time\n", name); return false; } #else if (!IS_ISP2401) { - dev_err(&dev->dev, "Support for %s (ISP2400) was disabled at compile time\n", + dev_err(&pdev->dev, "Support for %s (ISP2400) was disabled at compile time\n", name); return false; } #endif - dev_info(&dev->dev, "Detected %s version %d (ISP240%c) on %s\n", - name, dev->revision, - IS_ISP2401 ? '1' : '0', - product); + dev_info(&pdev->dev, "Detected %s version %d (ISP240%c) on %s\n", + name, pdev->revision, IS_ISP2401 ? '1' : '0', product); return true; } @@ -1538,66 +1522,60 @@ alloc_fail: #define ATOM_ISP_PCI_BAR 0 -static int atomisp_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id) +static int atomisp_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { const struct atomisp_platform_data *pdata; struct atomisp_device *isp; unsigned int start; - void __iomem *base; int err, val; u32 irq; - if (!is_valid_device(dev, id)) + if (!is_valid_device(pdev, id)) return -ENODEV; /* Pointer to struct device. */ - atomisp_dev = &dev->dev; + atomisp_dev = &pdev->dev; pdata = atomisp_get_platform_data(); if (!pdata) - dev_warn(&dev->dev, "no platform data available\n"); + dev_warn(&pdev->dev, "no platform data available\n"); - err = pcim_enable_device(dev); + err = pcim_enable_device(pdev); if (err) { - dev_err(&dev->dev, "Failed to enable CI ISP device (%d)\n", - err); + dev_err(&pdev->dev, "Failed to enable CI ISP device (%d)\n", err); return err; } - start = pci_resource_start(dev, ATOM_ISP_PCI_BAR); - dev_dbg(&dev->dev, "start: 0x%x\n", start); + start = pci_resource_start(pdev, ATOM_ISP_PCI_BAR); + dev_dbg(&pdev->dev, "start: 0x%x\n", start); - err = pcim_iomap_regions(dev, 1 << ATOM_ISP_PCI_BAR, pci_name(dev)); + err = pcim_iomap_regions(pdev, 1 << ATOM_ISP_PCI_BAR, pci_name(pdev)); if (err) { - dev_err(&dev->dev, "Failed to I/O memory remapping (%d)\n", - err); + dev_err(&pdev->dev, "Failed to I/O memory remapping (%d)\n", err); goto ioremap_fail; } - base = pcim_iomap_table(dev)[ATOM_ISP_PCI_BAR]; - dev_dbg(&dev->dev, "base: %p\n", base); - - atomisp_io_base = base; - - dev_dbg(&dev->dev, "atomisp_io_base: %p\n", atomisp_io_base); - - isp = devm_kzalloc(&dev->dev, sizeof(struct atomisp_device), GFP_KERNEL); + isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL); if (!isp) { err = -ENOMEM; goto atomisp_dev_alloc_fail; } - isp->pdev = dev; - isp->dev = &dev->dev; + + isp->dev = &pdev->dev; + isp->base = pcim_iomap_table(pdev)[ATOM_ISP_PCI_BAR]; isp->sw_contex.power_state = ATOM_ISP_POWER_UP; isp->saved_regs.ispmmadr = start; + dev_dbg(&pdev->dev, "atomisp mmio base: %p\n", isp->base); + rt_mutex_init(&isp->mutex); mutex_init(&isp->streamoff_mutex); spin_lock_init(&isp->lock); /* This is not a true PCI device on SoC, so the delay is not needed. */ - isp->pdev->d3_delay = 0; + pdev->d3_delay = 0; + + pci_set_drvdata(pdev, isp); switch (id->device & ATOMISP_PCI_DEVICE_SOC_MASK) { case ATOMISP_PCI_DEVICE_SOC_MRFLD: @@ -1648,15 +1626,14 @@ static int atomisp_pci_probe(struct pci_dev *dev, * have specs yet for exactly how it varies. Default to * BYT-CR but let provisioning set it via EFI variable */ - isp->hpll_freq = gmin_get_var_int(&dev->dev, false, "HpllFreq", - HPLL_FREQ_2000MHZ); + isp->hpll_freq = gmin_get_var_int(&pdev->dev, false, "HpllFreq", HPLL_FREQ_2000MHZ); /* * for BYT/CHT we are put isp into D3cold to avoid pci registers access * in power off. Set d3cold_delay to 0 since default 100ms is not * necessary. */ - isp->pdev->d3cold_delay = 0; + pdev->d3cold_delay = 0; break; case ATOMISP_PCI_DEVICE_SOC_ANN: isp->media_dev.hw_revision = ( @@ -1666,7 +1643,7 @@ static int atomisp_pci_probe(struct pci_dev *dev, ATOMISP_HW_REVISION_ISP2401_LEGACY #endif << ATOMISP_HW_REVISION_SHIFT); - isp->media_dev.hw_revision |= isp->pdev->revision < 2 ? + isp->media_dev.hw_revision |= pdev->revision < 2 ? ATOMISP_HW_STEPPING_A0 : ATOMISP_HW_STEPPING_B0; isp->dfs = &dfs_config_merr; isp->hpll_freq = HPLL_FREQ_1600MHZ; @@ -1679,13 +1656,13 @@ static int atomisp_pci_probe(struct pci_dev *dev, ATOMISP_HW_REVISION_ISP2401_LEGACY #endif << ATOMISP_HW_REVISION_SHIFT); - isp->media_dev.hw_revision |= isp->pdev->revision < 2 ? + isp->media_dev.hw_revision |= pdev->revision < 2 ? ATOMISP_HW_STEPPING_A0 : ATOMISP_HW_STEPPING_B0; isp->dfs = &dfs_config_cht; - isp->pdev->d3cold_delay = 0; + pdev->d3cold_delay = 0; - iosf_mbi_read(CCK_PORT, MBI_REG_READ, CCK_FUSE_REG_0, &val); + iosf_mbi_read(BT_MBI_UNIT_CCK, MBI_REG_READ, CCK_FUSE_REG_0, &val); switch (val & CCK_FUSE_HPLL_FREQ_MASK) { case 0x00: isp->hpll_freq = HPLL_FREQ_800MHZ; @@ -1698,18 +1675,16 @@ static int atomisp_pci_probe(struct pci_dev *dev, break; default: isp->hpll_freq = HPLL_FREQ_1600MHZ; - dev_warn(isp->dev, - "read HPLL from cck failed. Default to 1600 MHz.\n"); + dev_warn(&pdev->dev, "read HPLL from cck failed. Default to 1600 MHz.\n"); } break; default: - dev_err(&dev->dev, "un-supported IUNIT device\n"); + dev_err(&pdev->dev, "un-supported IUNIT device\n"); err = -ENODEV; goto atomisp_dev_alloc_fail; } - dev_info(&dev->dev, "ISP HPLL frequency base = %d MHz\n", - isp->hpll_freq); + dev_info(&pdev->dev, "ISP HPLL frequency base = %d MHz\n", isp->hpll_freq); isp->max_isr_latency = ATOMISP_MAX_ISR_LATENCY; @@ -1718,30 +1693,28 @@ static int atomisp_pci_probe(struct pci_dev *dev, isp->firmware = atomisp_load_firmware(isp); if (!isp->firmware) { err = -ENOENT; - dev_dbg(&dev->dev, "Firmware load failed\n"); + dev_dbg(&pdev->dev, "Firmware load failed\n"); goto load_fw_fail; } - err = sh_css_check_firmware_version(isp->dev, - isp->firmware->data); + err = sh_css_check_firmware_version(isp->dev, isp->firmware->data); if (err) { - dev_dbg(&dev->dev, "Firmware version check failed\n"); + dev_dbg(&pdev->dev, "Firmware version check failed\n"); goto fw_validation_fail; } } else { - dev_info(&dev->dev, "Firmware load will be deferred\n"); + dev_info(&pdev->dev, "Firmware load will be deferred\n"); } - pci_set_master(dev); - pci_set_drvdata(dev, isp); + pci_set_master(pdev); - err = pci_enable_msi(dev); + err = pci_enable_msi(pdev); if (err) { - dev_err(&dev->dev, "Failed to enable msi (%d)\n", err); + dev_err(&pdev->dev, "Failed to enable msi (%d)\n", err); goto enable_msi_fail; } - atomisp_msi_irq_init(isp, dev); + atomisp_msi_irq_init(isp); cpu_latency_qos_add_request(&isp->pm_qos, PM_QOS_DEFAULT_VALUE); @@ -1762,8 +1735,7 @@ static int atomisp_pci_probe(struct pci_dev *dev, * Workaround for imbalance data eye issue which is observed * on TNG B0. */ - pci_read_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, - &csi_afe_trim); + pci_read_config_dword(pdev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, &csi_afe_trim); csi_afe_trim &= ~((MRFLD_PCI_CSI_HSRXCLKTRIM_MASK << MRFLD_PCI_CSI1_HSRXCLKTRIM_SHIFT) | (MRFLD_PCI_CSI_HSRXCLKTRIM_MASK << @@ -1776,20 +1748,18 @@ static int atomisp_pci_probe(struct pci_dev *dev, MRFLD_PCI_CSI2_HSRXCLKTRIM_SHIFT) | (MRFLD_PCI_CSI3_HSRXCLKTRIM << MRFLD_PCI_CSI3_HSRXCLKTRIM_SHIFT); - pci_write_config_dword(dev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, - csi_afe_trim); + pci_write_config_dword(pdev, MRFLD_PCI_CSI_AFE_TRIM_CONTROL, csi_afe_trim); } err = atomisp_initialize_modules(isp); if (err < 0) { - dev_err(&dev->dev, "atomisp_initialize_modules (%d)\n", err); + dev_err(&pdev->dev, "atomisp_initialize_modules (%d)\n", err); goto initialize_modules_fail; } err = atomisp_register_entities(isp); if (err < 0) { - dev_err(&dev->dev, "atomisp_register_entities failed (%d)\n", - err); + dev_err(&pdev->dev, "atomisp_register_entities failed (%d)\n", err); goto register_entities_fail; } err = atomisp_create_pads_links(isp); @@ -1802,24 +1772,24 @@ static int atomisp_pci_probe(struct pci_dev *dev, /* save the iunit context only once after all the values are init'ed. */ atomisp_save_iunit_reg(isp); - pm_runtime_put_noidle(&dev->dev); - pm_runtime_allow(&dev->dev); + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_allow(&pdev->dev); hmm_init_mem_stat(repool_pgnr, dypool_enable, dypool_pgnr); err = hmm_pool_register(repool_pgnr, HMM_POOL_TYPE_RESERVED); if (err) { - dev_err(&dev->dev, "Failed to register reserved memory pool.\n"); + dev_err(&pdev->dev, "Failed to register reserved memory pool.\n"); goto hmm_pool_fail; } /* Init ISP memory management */ hmm_init(); - err = devm_request_threaded_irq(&dev->dev, dev->irq, + err = devm_request_threaded_irq(&pdev->dev, pdev->irq, atomisp_isr, atomisp_isr_thread, IRQF_SHARED, "isp_irq", isp); if (err) { - dev_err(&dev->dev, "Failed to request irq (%d)\n", err); + dev_err(&pdev->dev, "Failed to request irq (%d)\n", err); goto request_irq_fail; } @@ -1827,23 +1797,23 @@ static int atomisp_pci_probe(struct pci_dev *dev, if (!defer_fw_load) { err = atomisp_css_load_firmware(isp); if (err) { - dev_err(&dev->dev, "Failed to init css.\n"); + dev_err(&pdev->dev, "Failed to init css.\n"); goto css_init_fail; } } else { - dev_dbg(&dev->dev, "Skip css init.\n"); + dev_dbg(&pdev->dev, "Skip css init.\n"); } /* Clear FW image from memory */ release_firmware(isp->firmware); isp->firmware = NULL; isp->css_env.isp_css_fw.data = NULL; - atomisp_drvfs_init(&dev->driver->driver, isp); + atomisp_drvfs_init(isp); return 0; css_init_fail: - devm_free_irq(&dev->dev, dev->irq, isp); + devm_free_irq(&pdev->dev, pdev->irq, isp); request_irq_fail: hmm_cleanup(); hmm_pool_unregister(HMM_POOL_TYPE_RESERVED); @@ -1856,8 +1826,8 @@ register_entities_fail: atomisp_uninitialize_modules(isp); initialize_modules_fail: cpu_latency_qos_remove_request(&isp->pm_qos); - atomisp_msi_irq_uninit(isp, dev); - pci_disable_msi(dev); + atomisp_msi_irq_uninit(isp); + pci_disable_msi(pdev); enable_msi_fail: fw_validation_fail: release_firmware(isp->firmware); @@ -1869,35 +1839,34 @@ load_fw_fail: * The following lines have been copied from atomisp suspend path */ - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq); irq = irq & 1 << INTR_IIR; - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, irq); - pci_read_config_dword(dev, PCI_INTERRUPT_CTRL, &irq); + pci_read_config_dword(pdev, PCI_INTERRUPT_CTRL, &irq); irq &= ~(1 << INTR_IER); - pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, irq); + pci_write_config_dword(pdev, PCI_INTERRUPT_CTRL, irq); - atomisp_msi_irq_uninit(isp, dev); + atomisp_msi_irq_uninit(isp); atomisp_ospm_dphy_down(isp); /* Address later when we worry about the ...field chips */ if (IS_ENABLED(CONFIG_PM) && atomisp_mrfld_power_down(isp)) - dev_err(&dev->dev, "Failed to switch off ISP\n"); + dev_err(&pdev->dev, "Failed to switch off ISP\n"); atomisp_dev_alloc_fail: - pcim_iounmap_regions(dev, 1 << ATOM_ISP_PCI_BAR); + pcim_iounmap_regions(pdev, 1 << ATOM_ISP_PCI_BAR); ioremap_fail: return err; } -static void atomisp_pci_remove(struct pci_dev *dev) +static void atomisp_pci_remove(struct pci_dev *pdev) { - struct atomisp_device *isp = (struct atomisp_device *) - pci_get_drvdata(dev); + struct atomisp_device *isp = pci_get_drvdata(pdev); - dev_info(&dev->dev, "Removing atomisp driver\n"); + dev_info(&pdev->dev, "Removing atomisp driver\n"); atomisp_drvfs_exit(); @@ -1906,11 +1875,11 @@ static void atomisp_pci_remove(struct pci_dev *dev) ia_css_unload_firmware(); hmm_cleanup(); - pm_runtime_forbid(&dev->dev); - pm_runtime_get_noresume(&dev->dev); + pm_runtime_forbid(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); cpu_latency_qos_remove_request(&isp->pm_qos); - atomisp_msi_irq_uninit(isp, dev); + atomisp_msi_irq_uninit(isp); atomisp_unregister_entities(isp); destroy_workqueue(isp->wdt_work_queue); diff --git a/drivers/staging/media/atomisp/pci/base/refcount/src/refcount.c b/drivers/staging/media/atomisp/pci/base/refcount/src/refcount.c index cf02737cf8d446..a9c881631f4a32 100644 --- a/drivers/staging/media/atomisp/pci/base/refcount/src/refcount.c +++ b/drivers/staging/media/atomisp/pci/base/refcount/src/refcount.c @@ -48,7 +48,7 @@ static struct ia_css_refcount_entry *refcount_find_entry(ia_css_ptr ptr, return NULL; if (!myrefcount.items) { ia_css_debug_dtrace(IA_CSS_DEBUG_ERROR, - "refcount_find_entry(): Ref count not initialized!\n"); + "%s(): Ref count not initialized!\n", __func__); return NULL; } @@ -73,12 +73,12 @@ int ia_css_refcount_init(uint32_t size) if (size == 0) { ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_init(): Size of 0 for Ref count init!\n"); + "%s(): Size of 0 for Ref count init!\n", __func__); return -EINVAL; } if (myrefcount.items) { ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_init(): Ref count is already initialized\n"); + "%s(): Ref count is already initialized\n", __func__); return -EINVAL; } myrefcount.items = @@ -99,7 +99,7 @@ void ia_css_refcount_uninit(void) u32 i; ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_uninit() entry\n"); + "%s() entry\n", __func__); for (i = 0; i < myrefcount.size; i++) { /* driver verifier tool has issues with &arr[i] and prefers arr + i; as these are actually equivalent @@ -120,7 +120,7 @@ void ia_css_refcount_uninit(void) myrefcount.items = NULL; myrefcount.size = 0; ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_uninit() leave\n"); + "%s() leave\n", __func__); } ia_css_ptr ia_css_refcount_increment(s32 id, ia_css_ptr ptr) @@ -133,7 +133,7 @@ ia_css_ptr ia_css_refcount_increment(s32 id, ia_css_ptr ptr) entry = refcount_find_entry(ptr, false); ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_increment(%x) 0x%x\n", id, ptr); + "%s(%x) 0x%x\n", __func__, id, ptr); if (!entry) { entry = refcount_find_entry(ptr, true); @@ -145,7 +145,7 @@ ia_css_ptr ia_css_refcount_increment(s32 id, ia_css_ptr ptr) if (entry->id != id) { ia_css_debug_dtrace(IA_CSS_DEBUG_ERROR, - "ia_css_refcount_increment(): Ref count IDS do not match!\n"); + "%s(): Ref count IDS do not match!\n", __func__); return mmgr_NULL; } @@ -165,7 +165,7 @@ bool ia_css_refcount_decrement(s32 id, ia_css_ptr ptr) struct ia_css_refcount_entry *entry; ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_decrement(%x) 0x%x\n", id, ptr); + "%s(%x) 0x%x\n", __func__, id, ptr); if (ptr == mmgr_NULL) return false; @@ -175,7 +175,7 @@ bool ia_css_refcount_decrement(s32 id, ia_css_ptr ptr) if (entry) { if (entry->id != id) { ia_css_debug_dtrace(IA_CSS_DEBUG_ERROR, - "ia_css_refcount_decrement(): Ref count IDS do not match!\n"); + "%s(): Ref count IDS do not match!\n", __func__); return false; } if (entry->count > 0) { @@ -225,8 +225,8 @@ void ia_css_refcount_clear(s32 id, clear_func clear_func_ptr) u32 count = 0; assert(clear_func_ptr); - ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, "ia_css_refcount_clear(%x)\n", - id); + ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, "%s(%x)\n", + __func__, id); for (i = 0; i < myrefcount.size; i++) { /* driver verifier tool has issues with &arr[i] @@ -236,14 +236,14 @@ void ia_css_refcount_clear(s32 id, clear_func clear_func_ptr) entry = myrefcount.items + i; if ((entry->data != mmgr_NULL) && (entry->id == id)) { ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_clear: %x: 0x%x\n", + "%s: %x: 0x%x\n", __func__, id, entry->data); if (clear_func_ptr) { /* clear using provided function */ clear_func_ptr(entry->data); } else { ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_clear: using hmm_free: no clear_func\n"); + "%s: using hmm_free: no clear_func\n", __func__); hmm_free(entry->data); } @@ -260,7 +260,7 @@ void ia_css_refcount_clear(s32 id, clear_func clear_func_ptr) } } ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE, - "ia_css_refcount_clear(%x): cleared %d\n", id, + "%s(%x): cleared %d\n", __func__, id, count); } diff --git a/drivers/staging/media/atomisp/pci/hive_types.h b/drivers/staging/media/atomisp/pci/hive_types.h index addda9b81d7bd5..4b8a679fb6722d 100644 --- a/drivers/staging/media/atomisp/pci/hive_types.h +++ b/drivers/staging/media/atomisp/pci/hive_types.h @@ -52,32 +52,14 @@ typedef unsigned short hive_uint16; typedef unsigned int hive_uint32; typedef unsigned long long hive_uint64; -/* by default assume 32 bit master port (both data and address) */ -#ifndef HRT_DATA_WIDTH -#define HRT_DATA_WIDTH 32 -#endif -#ifndef HRT_ADDRESS_WIDTH -#define HRT_ADDRESS_WIDTH 32 -#endif - +#define HRT_DATA_WIDTH 32 +#define HRT_ADDRESS_WIDTH 64 #define HRT_DATA_BYTES (HRT_DATA_WIDTH / 8) #define HRT_ADDRESS_BYTES (HRT_ADDRESS_WIDTH / 8) +#define SIZEOF_HRT_REG (HRT_DATA_WIDTH >> 3) -#if HRT_DATA_WIDTH == 64 -typedef hive_uint64 hrt_data; -#elif HRT_DATA_WIDTH == 32 typedef hive_uint32 hrt_data; -#else -#error data width not supported -#endif - -#if HRT_ADDRESS_WIDTH == 64 typedef hive_uint64 hrt_address; -#elif HRT_ADDRESS_WIDTH == 32 -typedef hive_uint32 hrt_address; -#else -#error adddres width not supported -#endif /* use 64 bit addresses in simulation, where possible */ typedef hive_uint64 hive_sim_address; diff --git a/drivers/staging/media/atomisp/pci/hmm/hmm.c b/drivers/staging/media/atomisp/pci/hmm/hmm.c index 42fef17798622f..2bd39b4939f16d 100644 --- a/drivers/staging/media/atomisp/pci/hmm/hmm.c +++ b/drivers/staging/media/atomisp/pci/hmm/hmm.c @@ -735,11 +735,11 @@ ia_css_ptr hmm_host_vaddr_to_hrt_vaddr(const void *ptr) void hmm_show_mem_stat(const char *func, const int line) { - trace_printk("tol_cnt=%d usr_size=%d res_size=%d res_cnt=%d sys_size=%d dyc_thr=%d dyc_size=%d.\n", - hmm_mem_stat.tol_cnt, - hmm_mem_stat.usr_size, hmm_mem_stat.res_size, - hmm_mem_stat.res_cnt, hmm_mem_stat.sys_size, - hmm_mem_stat.dyc_thr, hmm_mem_stat.dyc_size); + pr_info("tol_cnt=%d usr_size=%d res_size=%d res_cnt=%d sys_size=%d dyc_thr=%d dyc_size=%d.\n", + hmm_mem_stat.tol_cnt, + hmm_mem_stat.usr_size, hmm_mem_stat.res_size, + hmm_mem_stat.res_cnt, hmm_mem_stat.sys_size, + hmm_mem_stat.dyc_thr, hmm_mem_stat.dyc_size); } void hmm_init_mem_stat(int res_pgnr, int dyc_en, int dyc_pgnr) diff --git a/drivers/staging/media/atomisp/pci/isp2400_system_global.h b/drivers/staging/media/atomisp/pci/isp2400_system_global.h index d87ddf1d2fe9b1..74fff465e8e8cb 100644 --- a/drivers/staging/media/atomisp/pci/isp2400_system_global.h +++ b/drivers/staging/media/atomisp/pci/isp2400_system_global.h @@ -13,306 +13,4 @@ * more details. */ -#ifndef __SYSTEM_GLOBAL_H_INCLUDED__ -#define __SYSTEM_GLOBAL_H_INCLUDED__ - -#include <hive_isp_css_defs.h> -#include <type_support.h> - -/* - * The longest allowed (uninteruptible) bus transfer, does not - * take stalling into account - */ -#define HIVE_ISP_MAX_BURST_LENGTH 1024 - -/* - * Maximum allowed burst length in words for the ISP DMA - */ -#define ISP_DMA_MAX_BURST_LENGTH 128 - -/* - * Create a list of HAS and IS properties that defines the system - * - * The configuration assumes the following - * - The system is hetereogeneous; Multiple cells and devices classes - * - The cell and device instances are homogeneous, each device type - * belongs to the same class - * - Device instances supporting a subset of the class capabilities are - * allowed - * - * We could manage different device classes through the enumerated - * lists (C) or the use of classes (C++), but that is presently not - * fully supported - * - * N.B. the 3 input formatters are of 2 different classess - */ - #define USE_INPUT_SYSTEM_VERSION_2 - -#define HAS_MMU_VERSION_2 -#define HAS_DMA_VERSION_2 -#define HAS_GDC_VERSION_2 -#define HAS_VAMEM_VERSION_2 -#define HAS_HMEM_VERSION_1 -#define HAS_BAMEM_VERSION_2 -#define HAS_IRQ_VERSION_2 -#define HAS_IRQ_MAP_VERSION_2 -#define HAS_INPUT_FORMATTER_VERSION_2 -/* 2401: HAS_INPUT_SYSTEM_VERSION_2401 */ -#define HAS_INPUT_SYSTEM_VERSION_2 -#define HAS_BUFFERED_SENSOR -#define HAS_FIFO_MONITORS_VERSION_2 -/* #define HAS_GP_REGS_VERSION_2 */ -#define HAS_GP_DEVICE_VERSION_2 -#define HAS_GPIO_VERSION_1 -#define HAS_TIMED_CTRL_VERSION_1 -#define HAS_RX_VERSION_2 - -#define DMA_DDR_TO_VAMEM_WORKAROUND -#define DMA_DDR_TO_HMEM_WORKAROUND - -/* - * Semi global. "HRT" is accessible from SP, but the HRT types do not fully apply - */ -#define HRT_VADDRESS_WIDTH 32 -//#define HRT_ADDRESS_WIDTH 64 /* Surprise, this is a local property*/ -#define HRT_DATA_WIDTH 32 - -#define SIZEOF_HRT_REG (HRT_DATA_WIDTH >> 3) -#define HIVE_ISP_CTRL_DATA_BYTES (HIVE_ISP_CTRL_DATA_WIDTH / 8) - -/* The main bus connecting all devices */ -#define HRT_BUS_WIDTH HIVE_ISP_CTRL_DATA_WIDTH -#define HRT_BUS_BYTES HIVE_ISP_CTRL_DATA_BYTES - -/* per-frame parameter handling support */ -#define SH_CSS_ENABLE_PER_FRAME_PARAMS - -typedef u32 hrt_bus_align_t; - -/* - * Enumerate the devices, device access through the API is by ID, through the DLI by address - * The enumerator terminators are used to size the wiring arrays and as an exception value. - */ -typedef enum { - DDR0_ID = 0, - N_DDR_ID -} ddr_ID_t; - -typedef enum { - ISP0_ID = 0, - N_ISP_ID -} isp_ID_t; - -typedef enum { - SP0_ID = 0, - N_SP_ID -} sp_ID_t; - -typedef enum { - MMU0_ID = 0, - MMU1_ID, - N_MMU_ID -} mmu_ID_t; - -typedef enum { - DMA0_ID = 0, - N_DMA_ID -} dma_ID_t; - -typedef enum { - GDC0_ID = 0, - GDC1_ID, - N_GDC_ID -} gdc_ID_t; - -#define N_GDC_ID_CPP 2 // this extra define is needed because we want to use it also in the preprocessor, and that doesn't work with enums. - -typedef enum { - VAMEM0_ID = 0, - VAMEM1_ID, - VAMEM2_ID, - N_VAMEM_ID -} vamem_ID_t; - -typedef enum { - BAMEM0_ID = 0, - N_BAMEM_ID -} bamem_ID_t; - -typedef enum { - HMEM0_ID = 0, - N_HMEM_ID -} hmem_ID_t; - -/* -typedef enum { - IRQ0_ID = 0, - N_IRQ_ID -} irq_ID_t; -*/ - -typedef enum { - IRQ0_ID = 0, // GP IRQ block - IRQ1_ID, // Input formatter - IRQ2_ID, // input system - IRQ3_ID, // input selector - N_IRQ_ID -} irq_ID_t; - -typedef enum { - FIFO_MONITOR0_ID = 0, - N_FIFO_MONITOR_ID -} fifo_monitor_ID_t; - -/* - * Deprecated: Since all gp_reg instances are different - * and put in the address maps of other devices we cannot - * enumerate them as that assumes the instrances are the - * same. - * - * We define a single GP_DEVICE containing all gp_regs - * w.r.t. a single base address - * -typedef enum { - GP_REGS0_ID = 0, - N_GP_REGS_ID -} gp_regs_ID_t; - */ -typedef enum { - GP_DEVICE0_ID = 0, - N_GP_DEVICE_ID -} gp_device_ID_t; - -typedef enum { - GP_TIMER0_ID = 0, - GP_TIMER1_ID, - GP_TIMER2_ID, - GP_TIMER3_ID, - GP_TIMER4_ID, - GP_TIMER5_ID, - GP_TIMER6_ID, - GP_TIMER7_ID, - N_GP_TIMER_ID -} gp_timer_ID_t; - -typedef enum { - GPIO0_ID = 0, - N_GPIO_ID -} gpio_ID_t; - -typedef enum { - TIMED_CTRL0_ID = 0, - N_TIMED_CTRL_ID -} timed_ctrl_ID_t; - -typedef enum { - INPUT_FORMATTER0_ID = 0, - INPUT_FORMATTER1_ID, - INPUT_FORMATTER2_ID, - INPUT_FORMATTER3_ID, - N_INPUT_FORMATTER_ID -} input_formatter_ID_t; - -/* The IF RST is outside the IF */ -#define INPUT_FORMATTER0_SRST_OFFSET 0x0824 -#define INPUT_FORMATTER1_SRST_OFFSET 0x0624 -#define INPUT_FORMATTER2_SRST_OFFSET 0x0424 -#define INPUT_FORMATTER3_SRST_OFFSET 0x0224 - -#define INPUT_FORMATTER0_SRST_MASK 0x0001 -#define INPUT_FORMATTER1_SRST_MASK 0x0002 -#define INPUT_FORMATTER2_SRST_MASK 0x0004 -#define INPUT_FORMATTER3_SRST_MASK 0x0008 - -typedef enum { - INPUT_SYSTEM0_ID = 0, - N_INPUT_SYSTEM_ID -} input_system_ID_t; - -typedef enum { - RX0_ID = 0, - N_RX_ID -} rx_ID_t; - -enum mipi_port_id { - MIPI_PORT0_ID = 0, - MIPI_PORT1_ID, - MIPI_PORT2_ID, - N_MIPI_PORT_ID -}; - -#define N_RX_CHANNEL_ID 4 - -/* Generic port enumeration with an internal port type ID */ -typedef enum { - CSI_PORT0_ID = 0, - CSI_PORT1_ID, - CSI_PORT2_ID, - TPG_PORT0_ID, - PRBS_PORT0_ID, - FIFO_PORT0_ID, - MEMORY_PORT0_ID, - N_INPUT_PORT_ID -} input_port_ID_t; - -typedef enum { - CAPTURE_UNIT0_ID = 0, - CAPTURE_UNIT1_ID, - CAPTURE_UNIT2_ID, - ACQUISITION_UNIT0_ID, - DMA_UNIT0_ID, - CTRL_UNIT0_ID, - GPREGS_UNIT0_ID, - FIFO_UNIT0_ID, - IRQ_UNIT0_ID, - N_SUB_SYSTEM_ID -} sub_system_ID_t; - -#define N_CAPTURE_UNIT_ID 3 -#define N_ACQUISITION_UNIT_ID 1 -#define N_CTRL_UNIT_ID 1 - -enum ia_css_isp_memories { - IA_CSS_ISP_PMEM0 = 0, - IA_CSS_ISP_DMEM0, - IA_CSS_ISP_VMEM0, - IA_CSS_ISP_VAMEM0, - IA_CSS_ISP_VAMEM1, - IA_CSS_ISP_VAMEM2, - IA_CSS_ISP_HMEM0, - IA_CSS_SP_DMEM0, - IA_CSS_DDR, - N_IA_CSS_MEMORIES -}; - -#define IA_CSS_NUM_MEMORIES 9 -/* For driver compatibility */ -#define N_IA_CSS_ISP_MEMORIES IA_CSS_NUM_MEMORIES -#define IA_CSS_NUM_ISP_MEMORIES IA_CSS_NUM_MEMORIES - -#if 0 -typedef enum { - dev_chn, /* device channels, external resource */ - ext_mem, /* external memories */ - int_mem, /* internal memories */ - int_chn /* internal channels, user defined */ -} resource_type_t; - -/* if this enum is extended with other memory resources, pls also extend the function resource_to_memptr() */ -typedef enum { - vied_nci_dev_chn_dma_ext0, - int_mem_vmem0, - int_mem_dmem0 -} resource_id_t; - -/* enum listing the different memories within a program group. - This enum is used in the mem_ptr_t type */ -typedef enum { - buf_mem_invalid = 0, - buf_mem_vmem_prog0, - buf_mem_dmem_prog0 -} buf_mem_t; - -#endif -#endif /* __SYSTEM_GLOBAL_H_INCLUDED__ */ diff --git a/drivers/staging/media/atomisp/pci/isp2400_system_local.h b/drivers/staging/media/atomisp/pci/isp2400_system_local.h deleted file mode 100644 index 675b8e5bdcc1d7..00000000000000 --- a/drivers/staging/media/atomisp/pci/isp2400_system_local.h +++ /dev/null @@ -1,321 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Support for Intel Camera Imaging ISP subsystem. - * Copyright (c) 2010-2015, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#ifndef __SYSTEM_LOCAL_H_INCLUDED__ -#define __SYSTEM_LOCAL_H_INCLUDED__ - -#ifdef HRT_ISP_CSS_CUSTOM_HOST -#ifndef HRT_USE_VIR_ADDRS -#define HRT_USE_VIR_ADDRS -#endif -#endif - -#include "system_global.h" - -/* HRT assumes 32 by default (see Linux/include/hive_types.h), overrule it in case it is different */ -#undef HRT_ADDRESS_WIDTH -#define HRT_ADDRESS_WIDTH 64 /* Surprise, this is a local property */ - -/* This interface is deprecated */ -#include "hive_types.h" - -/* - * Cell specific address maps - */ -#if HRT_ADDRESS_WIDTH == 64 - -#define GP_FIFO_BASE ((hrt_address)0x0000000000090104) /* This is NOT a base address */ - -/* DDR */ -static const hrt_address DDR_BASE[N_DDR_ID] = { - (hrt_address)0x0000000120000000ULL -}; - -/* ISP */ -static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { - (hrt_address)0x0000000000020000ULL -}; - -static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { - (hrt_address)0x0000000000200000ULL -}; - -static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { - (hrt_address)0x0000000000100000ULL -}; - -static const hrt_address ISP_VAMEM_BASE[N_VAMEM_ID] = { - (hrt_address)0x00000000001C0000ULL, - (hrt_address)0x00000000001D0000ULL, - (hrt_address)0x00000000001E0000ULL -}; - -static const hrt_address ISP_HMEM_BASE[N_HMEM_ID] = { - (hrt_address)0x00000000001F0000ULL -}; - -/* SP */ -static const hrt_address SP_CTRL_BASE[N_SP_ID] = { - (hrt_address)0x0000000000010000ULL -}; - -static const hrt_address SP_DMEM_BASE[N_SP_ID] = { - (hrt_address)0x0000000000300000ULL -}; - -static const hrt_address SP_PMEM_BASE[N_SP_ID] = { - (hrt_address)0x00000000000B0000ULL -}; - -/* MMU */ -/* - * MMU0_ID: The data MMU - * MMU1_ID: The icache MMU - */ -static const hrt_address MMU_BASE[N_MMU_ID] = { - (hrt_address)0x0000000000070000ULL, - (hrt_address)0x00000000000A0000ULL -}; - -/* DMA */ -static const hrt_address DMA_BASE[N_DMA_ID] = { - (hrt_address)0x0000000000040000ULL -}; - -/* IRQ */ -static const hrt_address IRQ_BASE[N_IRQ_ID] = { - (hrt_address)0x0000000000000500ULL, - (hrt_address)0x0000000000030A00ULL, - (hrt_address)0x000000000008C000ULL, - (hrt_address)0x0000000000090200ULL -}; - -/* - (hrt_address)0x0000000000000500ULL}; - */ - -/* GDC */ -static const hrt_address GDC_BASE[N_GDC_ID] = { - (hrt_address)0x0000000000050000ULL, - (hrt_address)0x0000000000060000ULL -}; - -/* FIFO_MONITOR (not a subset of GP_DEVICE) */ -static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { - (hrt_address)0x0000000000000000ULL -}; - -/* -static const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = { - (hrt_address)0x0000000000000000ULL}; - -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - (hrt_address)0x0000000000090000ULL}; -*/ - -/* GP_DEVICE (single base for all separate GP_REG instances) */ -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - (hrt_address)0x0000000000000000ULL -}; - -/*GP TIMER , all timer registers are inter-twined, - * so, having multiple base addresses for - * different timers does not help*/ -static const hrt_address GP_TIMER_BASE = - (hrt_address)0x0000000000000600ULL; -/* GPIO */ -static const hrt_address GPIO_BASE[N_GPIO_ID] = { - (hrt_address)0x0000000000000400ULL -}; - -/* TIMED_CTRL */ -static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { - (hrt_address)0x0000000000000100ULL -}; - -/* INPUT_FORMATTER */ -static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { - (hrt_address)0x0000000000030000ULL, - (hrt_address)0x0000000000030200ULL, - (hrt_address)0x0000000000030400ULL, - (hrt_address)0x0000000000030600ULL -}; /* memcpy() */ - -/* INPUT_SYSTEM */ -static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { - (hrt_address)0x0000000000080000ULL -}; - -/* (hrt_address)0x0000000000081000ULL, */ /* capture A */ -/* (hrt_address)0x0000000000082000ULL, */ /* capture B */ -/* (hrt_address)0x0000000000083000ULL, */ /* capture C */ -/* (hrt_address)0x0000000000084000ULL, */ /* Acquisition */ -/* (hrt_address)0x0000000000085000ULL, */ /* DMA */ -/* (hrt_address)0x0000000000089000ULL, */ /* ctrl */ -/* (hrt_address)0x000000000008A000ULL, */ /* GP regs */ -/* (hrt_address)0x000000000008B000ULL, */ /* FIFO */ -/* (hrt_address)0x000000000008C000ULL, */ /* IRQ */ - -/* RX, the MIPI lane control regs start at offset 0 */ -static const hrt_address RX_BASE[N_RX_ID] = { - (hrt_address)0x0000000000080100ULL -}; - -#elif HRT_ADDRESS_WIDTH == 32 - -#define GP_FIFO_BASE ((hrt_address)0x00090104) /* This is NOT a base address */ - -/* DDR : Attention, this value not defined in 32-bit */ -static const hrt_address DDR_BASE[N_DDR_ID] = { - (hrt_address)0x00000000UL -}; - -/* ISP */ -static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { - (hrt_address)0x00020000UL -}; - -static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { - (hrt_address)0x00200000UL -}; - -static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { - (hrt_address)0x100000UL -}; - -static const hrt_address ISP_VAMEM_BASE[N_VAMEM_ID] = { - (hrt_address)0xffffffffUL, - (hrt_address)0xffffffffUL, - (hrt_address)0xffffffffUL -}; - -static const hrt_address ISP_HMEM_BASE[N_HMEM_ID] = { - (hrt_address)0xffffffffUL -}; - -/* SP */ -static const hrt_address SP_CTRL_BASE[N_SP_ID] = { - (hrt_address)0x00010000UL -}; - -static const hrt_address SP_DMEM_BASE[N_SP_ID] = { - (hrt_address)0x00300000UL -}; - -static const hrt_address SP_PMEM_BASE[N_SP_ID] = { - (hrt_address)0x000B0000UL -}; - -/* MMU */ -/* - * MMU0_ID: The data MMU - * MMU1_ID: The icache MMU - */ -static const hrt_address MMU_BASE[N_MMU_ID] = { - (hrt_address)0x00070000UL, - (hrt_address)0x000A0000UL -}; - -/* DMA */ -static const hrt_address DMA_BASE[N_DMA_ID] = { - (hrt_address)0x00040000UL -}; - -/* IRQ */ -static const hrt_address IRQ_BASE[N_IRQ_ID] = { - (hrt_address)0x00000500UL, - (hrt_address)0x00030A00UL, - (hrt_address)0x0008C000UL, - (hrt_address)0x00090200UL -}; - -/* - (hrt_address)0x00000500UL}; - */ - -/* GDC */ -static const hrt_address GDC_BASE[N_GDC_ID] = { - (hrt_address)0x00050000UL, - (hrt_address)0x00060000UL -}; - -/* FIFO_MONITOR (not a subset of GP_DEVICE) */ -static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { - (hrt_address)0x00000000UL -}; - -/* -static const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = { - (hrt_address)0x00000000UL}; - -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - (hrt_address)0x00090000UL}; -*/ - -/* GP_DEVICE (single base for all separate GP_REG instances) */ -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - (hrt_address)0x00000000UL -}; - -/*GP TIMER , all timer registers are inter-twined, - * so, having multiple base addresses for - * different timers does not help*/ -static const hrt_address GP_TIMER_BASE = - (hrt_address)0x00000600UL; - -/* GPIO */ -static const hrt_address GPIO_BASE[N_GPIO_ID] = { - (hrt_address)0x00000400UL -}; - -/* TIMED_CTRL */ -static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { - (hrt_address)0x00000100UL -}; - -/* INPUT_FORMATTER */ -static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { - (hrt_address)0x00030000UL, - (hrt_address)0x00030200UL, - (hrt_address)0x00030400UL -}; - -/* (hrt_address)0x00030600UL, */ /* memcpy() */ - -/* INPUT_SYSTEM */ -static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { - (hrt_address)0x00080000UL -}; - -/* (hrt_address)0x00081000UL, */ /* capture A */ -/* (hrt_address)0x00082000UL, */ /* capture B */ -/* (hrt_address)0x00083000UL, */ /* capture C */ -/* (hrt_address)0x00084000UL, */ /* Acquisition */ -/* (hrt_address)0x00085000UL, */ /* DMA */ -/* (hrt_address)0x00089000UL, */ /* ctrl */ -/* (hrt_address)0x0008A000UL, */ /* GP regs */ -/* (hrt_address)0x0008B000UL, */ /* FIFO */ -/* (hrt_address)0x0008C000UL, */ /* IRQ */ - -/* RX, the MIPI lane control regs start at offset 0 */ -static const hrt_address RX_BASE[N_RX_ID] = { - (hrt_address)0x00080100UL -}; - -#else -#error "system_local.h: HRT_ADDRESS_WIDTH must be one of {32,64}" -#endif - -#endif /* __SYSTEM_LOCAL_H_INCLUDED__ */ diff --git a/drivers/staging/media/atomisp/pci/isp2401_system_global.h b/drivers/staging/media/atomisp/pci/isp2401_system_global.h index 8bb2a956f983ef..27cd2535bab806 100644 --- a/drivers/staging/media/atomisp/pci/isp2401_system_global.h +++ b/drivers/staging/media/atomisp/pci/isp2401_system_global.h @@ -13,415 +13,7 @@ * more details. */ -#ifndef __SYSTEM_GLOBAL_H_INCLUDED__ -#define __SYSTEM_GLOBAL_H_INCLUDED__ - -#include <hive_isp_css_defs.h> -#include <type_support.h> - -/* - * The longest allowed (uninteruptible) bus transfer, does not - * take stalling into account - */ -#define HIVE_ISP_MAX_BURST_LENGTH 1024 - -/* - * Maximum allowed burst length in words for the ISP DMA - * This value is set to 2 to prevent the ISP DMA from blocking - * the bus for too long; as the input system can only buffer - * 2 lines on Moorefield and Cherrytrail, the input system buffers - * may overflow if blocked for too long (BZ 2726). - */ -#define ISP_DMA_MAX_BURST_LENGTH 2 - -/* - * Create a list of HAS and IS properties that defines the system - * - * The configuration assumes the following - * - The system is hetereogeneous; Multiple cells and devices classes - * - The cell and device instances are homogeneous, each device type - * belongs to the same class - * - Device instances supporting a subset of the class capabilities are - * allowed - * - * We could manage different device classes through the enumerated - * lists (C) or the use of classes (C++), but that is presently not - * fully supported - * - * N.B. the 3 input formatters are of 2 different classess - */ - +#define HAS_NO_INPUT_FORMATTER #define USE_INPUT_SYSTEM_VERSION_2401 - -#define HAS_MMU_VERSION_2 -#define HAS_DMA_VERSION_2 -#define HAS_GDC_VERSION_2 -#define HAS_VAMEM_VERSION_2 -#define HAS_HMEM_VERSION_1 -#define HAS_BAMEM_VERSION_2 -#define HAS_IRQ_VERSION_2 -#define HAS_IRQ_MAP_VERSION_2 -#define HAS_INPUT_FORMATTER_VERSION_2 -/* 2401: HAS_INPUT_SYSTEM_VERSION_3 */ -/* 2400: HAS_INPUT_SYSTEM_VERSION_2 */ -#define HAS_INPUT_SYSTEM_VERSION_2 #define HAS_INPUT_SYSTEM_VERSION_2401 -#define HAS_BUFFERED_SENSOR -#define HAS_FIFO_MONITORS_VERSION_2 -/* #define HAS_GP_REGS_VERSION_2 */ -#define HAS_GP_DEVICE_VERSION_2 -#define HAS_GPIO_VERSION_1 -#define HAS_TIMED_CTRL_VERSION_1 -#define HAS_RX_VERSION_2 -#define HAS_NO_INPUT_FORMATTER -/*#define HAS_NO_PACKED_RAW_PIXELS*/ -/*#define HAS_NO_DVS_6AXIS_CONFIG_UPDATE*/ - -#define DMA_DDR_TO_VAMEM_WORKAROUND -#define DMA_DDR_TO_HMEM_WORKAROUND - -/* - * Semi global. "HRT" is accessible from SP, but - * the HRT types do not fully apply - */ -#define HRT_VADDRESS_WIDTH 32 -/* Surprise, this is a local property*/ -/*#define HRT_ADDRESS_WIDTH 64 */ -#define HRT_DATA_WIDTH 32 - -#define SIZEOF_HRT_REG (HRT_DATA_WIDTH >> 3) -#define HIVE_ISP_CTRL_DATA_BYTES (HIVE_ISP_CTRL_DATA_WIDTH / 8) - -/* The main bus connecting all devices */ -#define HRT_BUS_WIDTH HIVE_ISP_CTRL_DATA_WIDTH -#define HRT_BUS_BYTES HIVE_ISP_CTRL_DATA_BYTES - #define CSI2P_DISABLE_ISYS2401_ONLINE_MODE - -/* per-frame parameter handling support */ -#define SH_CSS_ENABLE_PER_FRAME_PARAMS - -typedef u32 hrt_bus_align_t; - -/* - * Enumerate the devices, device access through the API is by ID, - * through the DLI by address. The enumerator terminators are used - * to size the wiring arrays and as an exception value. - */ -typedef enum { - DDR0_ID = 0, - N_DDR_ID -} ddr_ID_t; - -typedef enum { - ISP0_ID = 0, - N_ISP_ID -} isp_ID_t; - -typedef enum { - SP0_ID = 0, - N_SP_ID -} sp_ID_t; - -typedef enum { - MMU0_ID = 0, - MMU1_ID, - N_MMU_ID -} mmu_ID_t; - -typedef enum { - DMA0_ID = 0, - N_DMA_ID -} dma_ID_t; - -typedef enum { - GDC0_ID = 0, - GDC1_ID, - N_GDC_ID -} gdc_ID_t; - -/* this extra define is needed because we want to use it also - in the preprocessor, and that doesn't work with enums. - */ -#define N_GDC_ID_CPP 2 - -typedef enum { - VAMEM0_ID = 0, - VAMEM1_ID, - VAMEM2_ID, - N_VAMEM_ID -} vamem_ID_t; - -typedef enum { - BAMEM0_ID = 0, - N_BAMEM_ID -} bamem_ID_t; - -typedef enum { - HMEM0_ID = 0, - N_HMEM_ID -} hmem_ID_t; - -typedef enum { - ISYS_IRQ0_ID = 0, /* port a */ - ISYS_IRQ1_ID, /* port b */ - ISYS_IRQ2_ID, /* port c */ - N_ISYS_IRQ_ID -} isys_irq_ID_t; - -typedef enum { - IRQ0_ID = 0, /* GP IRQ block */ - IRQ1_ID, /* Input formatter */ - IRQ2_ID, /* input system */ - IRQ3_ID, /* input selector */ - N_IRQ_ID -} irq_ID_t; - -typedef enum { - FIFO_MONITOR0_ID = 0, - N_FIFO_MONITOR_ID -} fifo_monitor_ID_t; - -/* - * Deprecated: Since all gp_reg instances are different - * and put in the address maps of other devices we cannot - * enumerate them as that assumes the instrances are the - * same. - * - * We define a single GP_DEVICE containing all gp_regs - * w.r.t. a single base address - * -typedef enum { - GP_REGS0_ID = 0, - N_GP_REGS_ID -} gp_regs_ID_t; - */ -typedef enum { - GP_DEVICE0_ID = 0, - N_GP_DEVICE_ID -} gp_device_ID_t; - -typedef enum { - GP_TIMER0_ID = 0, - GP_TIMER1_ID, - GP_TIMER2_ID, - GP_TIMER3_ID, - GP_TIMER4_ID, - GP_TIMER5_ID, - GP_TIMER6_ID, - GP_TIMER7_ID, - N_GP_TIMER_ID -} gp_timer_ID_t; - -typedef enum { - GPIO0_ID = 0, - N_GPIO_ID -} gpio_ID_t; - -typedef enum { - TIMED_CTRL0_ID = 0, - N_TIMED_CTRL_ID -} timed_ctrl_ID_t; - -typedef enum { - INPUT_FORMATTER0_ID = 0, - INPUT_FORMATTER1_ID, - INPUT_FORMATTER2_ID, - INPUT_FORMATTER3_ID, - N_INPUT_FORMATTER_ID -} input_formatter_ID_t; - -/* The IF RST is outside the IF */ -#define INPUT_FORMATTER0_SRST_OFFSET 0x0824 -#define INPUT_FORMATTER1_SRST_OFFSET 0x0624 -#define INPUT_FORMATTER2_SRST_OFFSET 0x0424 -#define INPUT_FORMATTER3_SRST_OFFSET 0x0224 - -#define INPUT_FORMATTER0_SRST_MASK 0x0001 -#define INPUT_FORMATTER1_SRST_MASK 0x0002 -#define INPUT_FORMATTER2_SRST_MASK 0x0004 -#define INPUT_FORMATTER3_SRST_MASK 0x0008 - -typedef enum { - INPUT_SYSTEM0_ID = 0, - N_INPUT_SYSTEM_ID -} input_system_ID_t; - -typedef enum { - RX0_ID = 0, - N_RX_ID -} rx_ID_t; - -enum mipi_port_id { - MIPI_PORT0_ID = 0, - MIPI_PORT1_ID, - MIPI_PORT2_ID, - N_MIPI_PORT_ID -}; - -#define N_RX_CHANNEL_ID 4 - -/* Generic port enumeration with an internal port type ID */ -typedef enum { - CSI_PORT0_ID = 0, - CSI_PORT1_ID, - CSI_PORT2_ID, - TPG_PORT0_ID, - PRBS_PORT0_ID, - FIFO_PORT0_ID, - MEMORY_PORT0_ID, - N_INPUT_PORT_ID -} input_port_ID_t; - -typedef enum { - CAPTURE_UNIT0_ID = 0, - CAPTURE_UNIT1_ID, - CAPTURE_UNIT2_ID, - ACQUISITION_UNIT0_ID, - DMA_UNIT0_ID, - CTRL_UNIT0_ID, - GPREGS_UNIT0_ID, - FIFO_UNIT0_ID, - IRQ_UNIT0_ID, - N_SUB_SYSTEM_ID -} sub_system_ID_t; - -#define N_CAPTURE_UNIT_ID 3 -#define N_ACQUISITION_UNIT_ID 1 -#define N_CTRL_UNIT_ID 1 - -/* - * Input-buffer Controller. - */ -typedef enum { - IBUF_CTRL0_ID = 0, /* map to ISYS2401_IBUF_CNTRL_A */ - IBUF_CTRL1_ID, /* map to ISYS2401_IBUF_CNTRL_B */ - IBUF_CTRL2_ID, /* map ISYS2401_IBUF_CNTRL_C */ - N_IBUF_CTRL_ID -} ibuf_ctrl_ID_t; -/* end of Input-buffer Controller */ - -/* - * Stream2MMIO. - */ -typedef enum { - STREAM2MMIO0_ID = 0, /* map to ISYS2401_S2M_A */ - STREAM2MMIO1_ID, /* map to ISYS2401_S2M_B */ - STREAM2MMIO2_ID, /* map to ISYS2401_S2M_C */ - N_STREAM2MMIO_ID -} stream2mmio_ID_t; - -typedef enum { - /* - * Stream2MMIO 0 has 8 SIDs that are indexed by - * [STREAM2MMIO_SID0_ID...STREAM2MMIO_SID7_ID]. - * - * Stream2MMIO 1 has 4 SIDs that are indexed by - * [STREAM2MMIO_SID0_ID...TREAM2MMIO_SID3_ID]. - * - * Stream2MMIO 2 has 4 SIDs that are indexed by - * [STREAM2MMIO_SID0_ID...STREAM2MMIO_SID3_ID]. - */ - STREAM2MMIO_SID0_ID = 0, - STREAM2MMIO_SID1_ID, - STREAM2MMIO_SID2_ID, - STREAM2MMIO_SID3_ID, - STREAM2MMIO_SID4_ID, - STREAM2MMIO_SID5_ID, - STREAM2MMIO_SID6_ID, - STREAM2MMIO_SID7_ID, - N_STREAM2MMIO_SID_ID -} stream2mmio_sid_ID_t; -/* end of Stream2MMIO */ - -/** - * Input System 2401: CSI-MIPI recevier. - */ -typedef enum { - CSI_RX_BACKEND0_ID = 0, /* map to ISYS2401_MIPI_BE_A */ - CSI_RX_BACKEND1_ID, /* map to ISYS2401_MIPI_BE_B */ - CSI_RX_BACKEND2_ID, /* map to ISYS2401_MIPI_BE_C */ - N_CSI_RX_BACKEND_ID -} csi_rx_backend_ID_t; - -typedef enum { - CSI_RX_FRONTEND0_ID = 0, /* map to ISYS2401_CSI_RX_A */ - CSI_RX_FRONTEND1_ID, /* map to ISYS2401_CSI_RX_B */ - CSI_RX_FRONTEND2_ID, /* map to ISYS2401_CSI_RX_C */ -#define N_CSI_RX_FRONTEND_ID (CSI_RX_FRONTEND2_ID + 1) -} csi_rx_frontend_ID_t; - -typedef enum { - CSI_RX_DLANE0_ID = 0, /* map to DLANE0 in CSI RX */ - CSI_RX_DLANE1_ID, /* map to DLANE1 in CSI RX */ - CSI_RX_DLANE2_ID, /* map to DLANE2 in CSI RX */ - CSI_RX_DLANE3_ID, /* map to DLANE3 in CSI RX */ - N_CSI_RX_DLANE_ID -} csi_rx_fe_dlane_ID_t; -/* end of CSI-MIPI receiver */ - -typedef enum { - ISYS2401_DMA0_ID = 0, - N_ISYS2401_DMA_ID -} isys2401_dma_ID_t; - -/** - * Pixel-generator. ("system_global.h") - */ -typedef enum { - PIXELGEN0_ID = 0, - PIXELGEN1_ID, - PIXELGEN2_ID, - N_PIXELGEN_ID -} pixelgen_ID_t; -/* end of pixel-generator. ("system_global.h") */ - -typedef enum { - INPUT_SYSTEM_CSI_PORT0_ID = 0, - INPUT_SYSTEM_CSI_PORT1_ID, - INPUT_SYSTEM_CSI_PORT2_ID, - - INPUT_SYSTEM_PIXELGEN_PORT0_ID, - INPUT_SYSTEM_PIXELGEN_PORT1_ID, - INPUT_SYSTEM_PIXELGEN_PORT2_ID, - - N_INPUT_SYSTEM_INPUT_PORT_ID -} input_system_input_port_ID_t; - -#define N_INPUT_SYSTEM_CSI_PORT 3 - -typedef enum { - ISYS2401_DMA_CHANNEL_0 = 0, - ISYS2401_DMA_CHANNEL_1, - ISYS2401_DMA_CHANNEL_2, - ISYS2401_DMA_CHANNEL_3, - ISYS2401_DMA_CHANNEL_4, - ISYS2401_DMA_CHANNEL_5, - ISYS2401_DMA_CHANNEL_6, - ISYS2401_DMA_CHANNEL_7, - ISYS2401_DMA_CHANNEL_8, - ISYS2401_DMA_CHANNEL_9, - ISYS2401_DMA_CHANNEL_10, - ISYS2401_DMA_CHANNEL_11, - N_ISYS2401_DMA_CHANNEL -} isys2401_dma_channel; - -enum ia_css_isp_memories { - IA_CSS_ISP_PMEM0 = 0, - IA_CSS_ISP_DMEM0, - IA_CSS_ISP_VMEM0, - IA_CSS_ISP_VAMEM0, - IA_CSS_ISP_VAMEM1, - IA_CSS_ISP_VAMEM2, - IA_CSS_ISP_HMEM0, - IA_CSS_SP_DMEM0, - IA_CSS_DDR, - N_IA_CSS_MEMORIES -}; - -#define IA_CSS_NUM_MEMORIES 9 -/* For driver compatibility */ -#define N_IA_CSS_ISP_MEMORIES IA_CSS_NUM_MEMORIES -#define IA_CSS_NUM_ISP_MEMORIES IA_CSS_NUM_MEMORIES - -#endif /* __SYSTEM_GLOBAL_H_INCLUDED__ */ diff --git a/drivers/staging/media/atomisp/pci/isp2401_system_local.h b/drivers/staging/media/atomisp/pci/isp2401_system_local.h deleted file mode 100644 index b09f8faadb13b7..00000000000000 --- a/drivers/staging/media/atomisp/pci/isp2401_system_local.h +++ /dev/null @@ -1,402 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Support for Intel Camera Imaging ISP subsystem. - * Copyright (c) 2015, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#ifndef __SYSTEM_LOCAL_H_INCLUDED__ -#define __SYSTEM_LOCAL_H_INCLUDED__ - -#ifdef HRT_ISP_CSS_CUSTOM_HOST -#ifndef HRT_USE_VIR_ADDRS -#define HRT_USE_VIR_ADDRS -#endif -#endif - -#include "system_global.h" - -#define HRT_ADDRESS_WIDTH 64 /* Surprise, this is a local property */ - -/* This interface is deprecated */ -#include "hive_types.h" - -/* - * Cell specific address maps - */ -#if HRT_ADDRESS_WIDTH == 64 - -#define GP_FIFO_BASE ((hrt_address)0x0000000000090104) /* This is NOT a base address */ - -/* DDR */ -static const hrt_address DDR_BASE[N_DDR_ID] = { - 0x0000000120000000ULL -}; - -/* ISP */ -static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { - 0x0000000000020000ULL -}; - -static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { - 0x0000000000200000ULL -}; - -static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { - 0x0000000000100000ULL -}; - -static const hrt_address ISP_VAMEM_BASE[N_VAMEM_ID] = { - 0x00000000001C0000ULL, - 0x00000000001D0000ULL, - 0x00000000001E0000ULL -}; - -static const hrt_address ISP_HMEM_BASE[N_HMEM_ID] = { - 0x00000000001F0000ULL -}; - -/* SP */ -static const hrt_address SP_CTRL_BASE[N_SP_ID] = { - 0x0000000000010000ULL -}; - -static const hrt_address SP_DMEM_BASE[N_SP_ID] = { - 0x0000000000300000ULL -}; - -/* MMU */ -/* - * MMU0_ID: The data MMU - * MMU1_ID: The icache MMU - */ -static const hrt_address MMU_BASE[N_MMU_ID] = { - 0x0000000000070000ULL, - 0x00000000000A0000ULL -}; - -/* DMA */ -static const hrt_address DMA_BASE[N_DMA_ID] = { - 0x0000000000040000ULL -}; - -static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { - 0x00000000000CA000ULL -}; - -/* IRQ */ -static const hrt_address IRQ_BASE[N_IRQ_ID] = { - 0x0000000000000500ULL, - 0x0000000000030A00ULL, - 0x000000000008C000ULL, - 0x0000000000090200ULL -}; - -/* - 0x0000000000000500ULL}; - */ - -/* GDC */ -static const hrt_address GDC_BASE[N_GDC_ID] = { - 0x0000000000050000ULL, - 0x0000000000060000ULL -}; - -/* FIFO_MONITOR (not a subset of GP_DEVICE) */ -static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { - 0x0000000000000000ULL -}; - -/* -static const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = { - 0x0000000000000000ULL}; - -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - 0x0000000000090000ULL}; -*/ - -/* GP_DEVICE (single base for all separate GP_REG instances) */ -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - 0x0000000000000000ULL -}; - -/*GP TIMER , all timer registers are inter-twined, - * so, having multiple base addresses for - * different timers does not help*/ -static const hrt_address GP_TIMER_BASE = - (hrt_address)0x0000000000000600ULL; - -/* GPIO */ -static const hrt_address GPIO_BASE[N_GPIO_ID] = { - 0x0000000000000400ULL -}; - -/* TIMED_CTRL */ -static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { - 0x0000000000000100ULL -}; - -/* INPUT_FORMATTER */ -static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { - 0x0000000000030000ULL, - 0x0000000000030200ULL, - 0x0000000000030400ULL, - 0x0000000000030600ULL -}; /* memcpy() */ - -/* INPUT_SYSTEM */ -static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { - 0x0000000000080000ULL -}; - -/* 0x0000000000081000ULL, */ /* capture A */ -/* 0x0000000000082000ULL, */ /* capture B */ -/* 0x0000000000083000ULL, */ /* capture C */ -/* 0x0000000000084000ULL, */ /* Acquisition */ -/* 0x0000000000085000ULL, */ /* DMA */ -/* 0x0000000000089000ULL, */ /* ctrl */ -/* 0x000000000008A000ULL, */ /* GP regs */ -/* 0x000000000008B000ULL, */ /* FIFO */ -/* 0x000000000008C000ULL, */ /* IRQ */ - -/* RX, the MIPI lane control regs start at offset 0 */ -static const hrt_address RX_BASE[N_RX_ID] = { - 0x0000000000080100ULL -}; - -/* IBUF_CTRL, part of the Input System 2401 */ -static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { - 0x00000000000C1800ULL, /* ibuf controller A */ - 0x00000000000C3800ULL, /* ibuf controller B */ - 0x00000000000C5800ULL /* ibuf controller C */ -}; - -/* ISYS IRQ Controllers, part of the Input System 2401 */ -static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { - 0x00000000000C1400ULL, /* port a */ - 0x00000000000C3400ULL, /* port b */ - 0x00000000000C5400ULL /* port c */ -}; - -/* CSI FE, part of the Input System 2401 */ -static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { - 0x00000000000C0400ULL, /* csi fe controller A */ - 0x00000000000C2400ULL, /* csi fe controller B */ - 0x00000000000C4400ULL /* csi fe controller C */ -}; - -/* CSI BE, part of the Input System 2401 */ -static const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { - 0x00000000000C0800ULL, /* csi be controller A */ - 0x00000000000C2800ULL, /* csi be controller B */ - 0x00000000000C4800ULL /* csi be controller C */ -}; - -/* PIXEL Generator, part of the Input System 2401 */ -static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { - 0x00000000000C1000ULL, /* pixel gen controller A */ - 0x00000000000C3000ULL, /* pixel gen controller B */ - 0x00000000000C5000ULL /* pixel gen controller C */ -}; - -/* Stream2MMIO, part of the Input System 2401 */ -static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { - 0x00000000000C0C00ULL, /* stream2mmio controller A */ - 0x00000000000C2C00ULL, /* stream2mmio controller B */ - 0x00000000000C4C00ULL /* stream2mmio controller C */ -}; -#elif HRT_ADDRESS_WIDTH == 32 - -#define GP_FIFO_BASE ((hrt_address)0x00090104) /* This is NOT a base address */ - -/* DDR : Attention, this value not defined in 32-bit */ -static const hrt_address DDR_BASE[N_DDR_ID] = { - 0x00000000UL -}; - -/* ISP */ -static const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { - 0x00020000UL -}; - -static const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { - 0xffffffffUL -}; - -static const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { - 0xffffffffUL -}; - -static const hrt_address ISP_VAMEM_BASE[N_VAMEM_ID] = { - 0xffffffffUL, - 0xffffffffUL, - 0xffffffffUL -}; - -static const hrt_address ISP_HMEM_BASE[N_HMEM_ID] = { - 0xffffffffUL -}; - -/* SP */ -static const hrt_address SP_CTRL_BASE[N_SP_ID] = { - 0x00010000UL -}; - -static const hrt_address SP_DMEM_BASE[N_SP_ID] = { - 0x00300000UL -}; - -/* MMU */ -/* - * MMU0_ID: The data MMU - * MMU1_ID: The icache MMU - */ -static const hrt_address MMU_BASE[N_MMU_ID] = { - 0x00070000UL, - 0x000A0000UL -}; - -/* DMA */ -static const hrt_address DMA_BASE[N_DMA_ID] = { - 0x00040000UL -}; - -static const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { - 0x000CA000UL -}; - -/* IRQ */ -static const hrt_address IRQ_BASE[N_IRQ_ID] = { - 0x00000500UL, - 0x00030A00UL, - 0x0008C000UL, - 0x00090200UL -}; - -/* - 0x00000500UL}; - */ - -/* GDC */ -static const hrt_address GDC_BASE[N_GDC_ID] = { - 0x00050000UL, - 0x00060000UL -}; - -/* FIFO_MONITOR (not a subset of GP_DEVICE) */ -static const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { - 0x00000000UL -}; - -/* -static const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = { - 0x00000000UL}; - -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - 0x00090000UL}; -*/ - -/* GP_DEVICE (single base for all separate GP_REG instances) */ -static const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { - 0x00000000UL -}; - -/*GP TIMER , all timer registers are inter-twined, - * so, having multiple base addresses for - * different timers does not help*/ -static const hrt_address GP_TIMER_BASE = - (hrt_address)0x00000600UL; -/* GPIO */ -static const hrt_address GPIO_BASE[N_GPIO_ID] = { - 0x00000400UL -}; - -/* TIMED_CTRL */ -static const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { - 0x00000100UL -}; - -/* INPUT_FORMATTER */ -static const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { - 0x00030000UL, - 0x00030200UL, - 0x00030400UL -}; - -/* 0x00030600UL, */ /* memcpy() */ - -/* INPUT_SYSTEM */ -static const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { - 0x00080000UL -}; - -/* 0x00081000UL, */ /* capture A */ -/* 0x00082000UL, */ /* capture B */ -/* 0x00083000UL, */ /* capture C */ -/* 0x00084000UL, */ /* Acquisition */ -/* 0x00085000UL, */ /* DMA */ -/* 0x00089000UL, */ /* ctrl */ -/* 0x0008A000UL, */ /* GP regs */ -/* 0x0008B000UL, */ /* FIFO */ -/* 0x0008C000UL, */ /* IRQ */ - -/* RX, the MIPI lane control regs start at offset 0 */ -static const hrt_address RX_BASE[N_RX_ID] = { - 0x00080100UL -}; - -/* IBUF_CTRL, part of the Input System 2401 */ -static const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { - 0x000C1800UL, /* ibuf controller A */ - 0x000C3800UL, /* ibuf controller B */ - 0x000C5800UL /* ibuf controller C */ -}; - -/* ISYS IRQ Controllers, part of the Input System 2401 */ -static const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { - 0x000C1400ULL, /* port a */ - 0x000C3400ULL, /* port b */ - 0x000C5400ULL /* port c */ -}; - -/* CSI FE, part of the Input System 2401 */ -static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { - 0x000C0400UL, /* csi fe controller A */ - 0x000C2400UL, /* csi fe controller B */ - 0x000C4400UL /* csi fe controller C */ -}; - -/* CSI BE, part of the Input System 2401 */ -static const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { - 0x000C0800UL, /* csi be controller A */ - 0x000C2800UL, /* csi be controller B */ - 0x000C4800UL /* csi be controller C */ -}; - -/* PIXEL Generator, part of the Input System 2401 */ -static const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { - 0x000C1000UL, /* pixel gen controller A */ - 0x000C3000UL, /* pixel gen controller B */ - 0x000C5000UL /* pixel gen controller C */ -}; - -/* Stream2MMIO, part of the Input System 2401 */ -static const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { - 0x000C0C00UL, /* stream2mmio controller A */ - 0x000C2C00UL, /* stream2mmio controller B */ - 0x000C4C00UL /* stream2mmio controller C */ -}; - -#else -#error "system_local.h: HRT_ADDRESS_WIDTH must be one of {32,64}" -#endif - -#endif /* __SYSTEM_LOCAL_H_INCLUDED__ */ diff --git a/drivers/staging/media/atomisp/pci/sh_css.c b/drivers/staging/media/atomisp/pci/sh_css.c index 6676537f0e970a..54434c2dbaf904 100644 --- a/drivers/staging/media/atomisp/pci/sh_css.c +++ b/drivers/staging/media/atomisp/pci/sh_css.c @@ -1841,8 +1841,13 @@ ia_css_init(struct device *dev, const struct ia_css_env *env, #endif #if !defined(HAS_NO_INPUT_SYSTEM) - dma_set_max_burst_size(DMA0_ID, HIVE_DMA_BUS_DDR_CONN, - ISP_DMA_MAX_BURST_LENGTH); + + if (!IS_ISP2401) + dma_set_max_burst_size(DMA0_ID, HIVE_DMA_BUS_DDR_CONN, + ISP2400_DMA_MAX_BURST_LENGTH); + else + dma_set_max_burst_size(DMA0_ID, HIVE_DMA_BUS_DDR_CONN, + ISP2401_DMA_MAX_BURST_LENGTH); if (ia_css_isys_init() != INPUT_SYSTEM_ERR_NO_ERROR) err = -EINVAL; diff --git a/drivers/staging/media/atomisp/pci/system_global.h b/drivers/staging/media/atomisp/pci/system_global.h index 16d0a2e9a4dc7b..90210f6943d220 100644 --- a/drivers/staging/media/atomisp/pci/system_global.h +++ b/drivers/staging/media/atomisp/pci/system_global.h @@ -4,8 +4,403 @@ * (c) 2020 Mauro Carvalho Chehab <mchehab+huawei@kernel.org> */ +#ifndef __SYSTEM_GLOBAL_H_INCLUDED__ +#define __SYSTEM_GLOBAL_H_INCLUDED__ + +/* + * Create a list of HAS and IS properties that defines the system + * Those are common for both ISP2400 and ISP2401 + * + * The configuration assumes the following + * - The system is hetereogeneous; Multiple cells and devices classes + * - The cell and device instances are homogeneous, each device type + * belongs to the same class + * - Device instances supporting a subset of the class capabilities are + * allowed + * + * We could manage different device classes through the enumerated + * lists (C) or the use of classes (C++), but that is presently not + * fully supported + * + * N.B. the 3 input formatters are of 2 different classess + */ + +#define HAS_MMU_VERSION_2 +#define HAS_DMA_VERSION_2 +#define HAS_GDC_VERSION_2 +#define HAS_VAMEM_VERSION_2 +#define HAS_HMEM_VERSION_1 +#define HAS_BAMEM_VERSION_2 +#define HAS_IRQ_VERSION_2 +#define HAS_IRQ_MAP_VERSION_2 +#define HAS_INPUT_FORMATTER_VERSION_2 +#define HAS_INPUT_SYSTEM_VERSION_2 +#define HAS_BUFFERED_SENSOR +#define HAS_FIFO_MONITORS_VERSION_2 +#define HAS_GP_DEVICE_VERSION_2 +#define HAS_GPIO_VERSION_1 +#define HAS_TIMED_CTRL_VERSION_1 +#define HAS_RX_VERSION_2 + +/* per-frame parameter handling support */ +#define SH_CSS_ENABLE_PER_FRAME_PARAMS + +#define DMA_DDR_TO_VAMEM_WORKAROUND +#define DMA_DDR_TO_HMEM_WORKAROUND + +/* + * The longest allowed (uninteruptible) bus transfer, does not + * take stalling into account + */ +#define HIVE_ISP_MAX_BURST_LENGTH 1024 + +/* + * Maximum allowed burst length in words for the ISP DMA + * This value is set to 2 to prevent the ISP DMA from blocking + * the bus for too long; as the input system can only buffer + * 2 lines on Moorefield and Cherrytrail, the input system buffers + * may overflow if blocked for too long (BZ 2726). + */ +#define ISP2400_DMA_MAX_BURST_LENGTH 128 +#define ISP2401_DMA_MAX_BURST_LENGTH 2 + #ifdef ISP2401 # include "isp2401_system_global.h" #else # include "isp2400_system_global.h" #endif + +#include <hive_isp_css_defs.h> +#include <type_support.h> + +/* This interface is deprecated */ +#include "hive_types.h" + +/* + * Semi global. "HRT" is accessible from SP, but the HRT types do not fully apply + */ +#define HRT_VADDRESS_WIDTH 32 + +#define SIZEOF_HRT_REG (HRT_DATA_WIDTH >> 3) +#define HIVE_ISP_CTRL_DATA_BYTES (HIVE_ISP_CTRL_DATA_WIDTH / 8) + +/* The main bus connecting all devices */ +#define HRT_BUS_WIDTH HIVE_ISP_CTRL_DATA_WIDTH +#define HRT_BUS_BYTES HIVE_ISP_CTRL_DATA_BYTES + +typedef u32 hrt_bus_align_t; + +/* + * Enumerate the devices, device access through the API is by ID, + * through the DLI by address. The enumerator terminators are used + * to size the wiring arrays and as an exception value. + */ +typedef enum { + DDR0_ID = 0, + N_DDR_ID +} ddr_ID_t; + +typedef enum { + ISP0_ID = 0, + N_ISP_ID +} isp_ID_t; + +typedef enum { + SP0_ID = 0, + N_SP_ID +} sp_ID_t; + +typedef enum { + MMU0_ID = 0, + MMU1_ID, + N_MMU_ID +} mmu_ID_t; + +typedef enum { + DMA0_ID = 0, + N_DMA_ID +} dma_ID_t; + +typedef enum { + GDC0_ID = 0, + GDC1_ID, + N_GDC_ID +} gdc_ID_t; + +/* this extra define is needed because we want to use it also + in the preprocessor, and that doesn't work with enums. + */ +#define N_GDC_ID_CPP 2 + +typedef enum { + VAMEM0_ID = 0, + VAMEM1_ID, + VAMEM2_ID, + N_VAMEM_ID +} vamem_ID_t; + +typedef enum { + BAMEM0_ID = 0, + N_BAMEM_ID +} bamem_ID_t; + +typedef enum { + HMEM0_ID = 0, + N_HMEM_ID +} hmem_ID_t; + +typedef enum { + IRQ0_ID = 0, /* GP IRQ block */ + IRQ1_ID, /* Input formatter */ + IRQ2_ID, /* input system */ + IRQ3_ID, /* input selector */ + N_IRQ_ID +} irq_ID_t; + +typedef enum { + FIFO_MONITOR0_ID = 0, + N_FIFO_MONITOR_ID +} fifo_monitor_ID_t; + +typedef enum { + GP_DEVICE0_ID = 0, + N_GP_DEVICE_ID +} gp_device_ID_t; + +typedef enum { + GP_TIMER0_ID = 0, + GP_TIMER1_ID, + GP_TIMER2_ID, + GP_TIMER3_ID, + GP_TIMER4_ID, + GP_TIMER5_ID, + GP_TIMER6_ID, + GP_TIMER7_ID, + N_GP_TIMER_ID +} gp_timer_ID_t; + +typedef enum { + GPIO0_ID = 0, + N_GPIO_ID +} gpio_ID_t; + +typedef enum { + TIMED_CTRL0_ID = 0, + N_TIMED_CTRL_ID +} timed_ctrl_ID_t; + +typedef enum { + INPUT_FORMATTER0_ID = 0, + INPUT_FORMATTER1_ID, + INPUT_FORMATTER2_ID, + INPUT_FORMATTER3_ID, + N_INPUT_FORMATTER_ID +} input_formatter_ID_t; + +/* The IF RST is outside the IF */ +#define INPUT_FORMATTER0_SRST_OFFSET 0x0824 +#define INPUT_FORMATTER1_SRST_OFFSET 0x0624 +#define INPUT_FORMATTER2_SRST_OFFSET 0x0424 +#define INPUT_FORMATTER3_SRST_OFFSET 0x0224 + +#define INPUT_FORMATTER0_SRST_MASK 0x0001 +#define INPUT_FORMATTER1_SRST_MASK 0x0002 +#define INPUT_FORMATTER2_SRST_MASK 0x0004 +#define INPUT_FORMATTER3_SRST_MASK 0x0008 + +typedef enum { + INPUT_SYSTEM0_ID = 0, + N_INPUT_SYSTEM_ID +} input_system_ID_t; + +typedef enum { + RX0_ID = 0, + N_RX_ID +} rx_ID_t; + +enum mipi_port_id { + MIPI_PORT0_ID = 0, + MIPI_PORT1_ID, + MIPI_PORT2_ID, + N_MIPI_PORT_ID +}; + +#define N_RX_CHANNEL_ID 4 + +/* Generic port enumeration with an internal port type ID */ +typedef enum { + CSI_PORT0_ID = 0, + CSI_PORT1_ID, + CSI_PORT2_ID, + TPG_PORT0_ID, + PRBS_PORT0_ID, + FIFO_PORT0_ID, + MEMORY_PORT0_ID, + N_INPUT_PORT_ID +} input_port_ID_t; + +typedef enum { + CAPTURE_UNIT0_ID = 0, + CAPTURE_UNIT1_ID, + CAPTURE_UNIT2_ID, + ACQUISITION_UNIT0_ID, + DMA_UNIT0_ID, + CTRL_UNIT0_ID, + GPREGS_UNIT0_ID, + FIFO_UNIT0_ID, + IRQ_UNIT0_ID, + N_SUB_SYSTEM_ID +} sub_system_ID_t; + +#define N_CAPTURE_UNIT_ID 3 +#define N_ACQUISITION_UNIT_ID 1 +#define N_CTRL_UNIT_ID 1 + + +enum ia_css_isp_memories { + IA_CSS_ISP_PMEM0 = 0, + IA_CSS_ISP_DMEM0, + IA_CSS_ISP_VMEM0, + IA_CSS_ISP_VAMEM0, + IA_CSS_ISP_VAMEM1, + IA_CSS_ISP_VAMEM2, + IA_CSS_ISP_HMEM0, + IA_CSS_SP_DMEM0, + IA_CSS_DDR, + N_IA_CSS_MEMORIES +}; + +#define IA_CSS_NUM_MEMORIES 9 +/* For driver compatibility */ +#define N_IA_CSS_ISP_MEMORIES IA_CSS_NUM_MEMORIES +#define IA_CSS_NUM_ISP_MEMORIES IA_CSS_NUM_MEMORIES + +/* + * ISP2401 specific enums + */ + +typedef enum { + ISYS_IRQ0_ID = 0, /* port a */ + ISYS_IRQ1_ID, /* port b */ + ISYS_IRQ2_ID, /* port c */ + N_ISYS_IRQ_ID +} isys_irq_ID_t; + + +/* + * Input-buffer Controller. + */ +typedef enum { + IBUF_CTRL0_ID = 0, /* map to ISYS2401_IBUF_CNTRL_A */ + IBUF_CTRL1_ID, /* map to ISYS2401_IBUF_CNTRL_B */ + IBUF_CTRL2_ID, /* map ISYS2401_IBUF_CNTRL_C */ + N_IBUF_CTRL_ID +} ibuf_ctrl_ID_t; +/* end of Input-buffer Controller */ + +/* + * Stream2MMIO. + */ +typedef enum { + STREAM2MMIO0_ID = 0, /* map to ISYS2401_S2M_A */ + STREAM2MMIO1_ID, /* map to ISYS2401_S2M_B */ + STREAM2MMIO2_ID, /* map to ISYS2401_S2M_C */ + N_STREAM2MMIO_ID +} stream2mmio_ID_t; + +typedef enum { + /* + * Stream2MMIO 0 has 8 SIDs that are indexed by + * [STREAM2MMIO_SID0_ID...STREAM2MMIO_SID7_ID]. + * + * Stream2MMIO 1 has 4 SIDs that are indexed by + * [STREAM2MMIO_SID0_ID...TREAM2MMIO_SID3_ID]. + * + * Stream2MMIO 2 has 4 SIDs that are indexed by + * [STREAM2MMIO_SID0_ID...STREAM2MMIO_SID3_ID]. + */ + STREAM2MMIO_SID0_ID = 0, + STREAM2MMIO_SID1_ID, + STREAM2MMIO_SID2_ID, + STREAM2MMIO_SID3_ID, + STREAM2MMIO_SID4_ID, + STREAM2MMIO_SID5_ID, + STREAM2MMIO_SID6_ID, + STREAM2MMIO_SID7_ID, + N_STREAM2MMIO_SID_ID +} stream2mmio_sid_ID_t; +/* end of Stream2MMIO */ + +/** + * Input System 2401: CSI-MIPI recevier. + */ +typedef enum { + CSI_RX_BACKEND0_ID = 0, /* map to ISYS2401_MIPI_BE_A */ + CSI_RX_BACKEND1_ID, /* map to ISYS2401_MIPI_BE_B */ + CSI_RX_BACKEND2_ID, /* map to ISYS2401_MIPI_BE_C */ + N_CSI_RX_BACKEND_ID +} csi_rx_backend_ID_t; + +typedef enum { + CSI_RX_FRONTEND0_ID = 0, /* map to ISYS2401_CSI_RX_A */ + CSI_RX_FRONTEND1_ID, /* map to ISYS2401_CSI_RX_B */ + CSI_RX_FRONTEND2_ID, /* map to ISYS2401_CSI_RX_C */ +#define N_CSI_RX_FRONTEND_ID (CSI_RX_FRONTEND2_ID + 1) +} csi_rx_frontend_ID_t; + +typedef enum { + CSI_RX_DLANE0_ID = 0, /* map to DLANE0 in CSI RX */ + CSI_RX_DLANE1_ID, /* map to DLANE1 in CSI RX */ + CSI_RX_DLANE2_ID, /* map to DLANE2 in CSI RX */ + CSI_RX_DLANE3_ID, /* map to DLANE3 in CSI RX */ + N_CSI_RX_DLANE_ID +} csi_rx_fe_dlane_ID_t; +/* end of CSI-MIPI receiver */ + +typedef enum { + ISYS2401_DMA0_ID = 0, + N_ISYS2401_DMA_ID +} isys2401_dma_ID_t; + +/** + * Pixel-generator. ("system_global.h") + */ +typedef enum { + PIXELGEN0_ID = 0, + PIXELGEN1_ID, + PIXELGEN2_ID, + N_PIXELGEN_ID +} pixelgen_ID_t; +/* end of pixel-generator. ("system_global.h") */ + +typedef enum { + INPUT_SYSTEM_CSI_PORT0_ID = 0, + INPUT_SYSTEM_CSI_PORT1_ID, + INPUT_SYSTEM_CSI_PORT2_ID, + + INPUT_SYSTEM_PIXELGEN_PORT0_ID, + INPUT_SYSTEM_PIXELGEN_PORT1_ID, + INPUT_SYSTEM_PIXELGEN_PORT2_ID, + + N_INPUT_SYSTEM_INPUT_PORT_ID +} input_system_input_port_ID_t; + +#define N_INPUT_SYSTEM_CSI_PORT 3 + +typedef enum { + ISYS2401_DMA_CHANNEL_0 = 0, + ISYS2401_DMA_CHANNEL_1, + ISYS2401_DMA_CHANNEL_2, + ISYS2401_DMA_CHANNEL_3, + ISYS2401_DMA_CHANNEL_4, + ISYS2401_DMA_CHANNEL_5, + ISYS2401_DMA_CHANNEL_6, + ISYS2401_DMA_CHANNEL_7, + ISYS2401_DMA_CHANNEL_8, + ISYS2401_DMA_CHANNEL_9, + ISYS2401_DMA_CHANNEL_10, + ISYS2401_DMA_CHANNEL_11, + N_ISYS2401_DMA_CHANNEL +} isys2401_dma_channel; + +#endif /* __SYSTEM_GLOBAL_H_INCLUDED__ */ diff --git a/drivers/staging/media/atomisp/pci/system_local.c b/drivers/staging/media/atomisp/pci/system_local.c new file mode 100644 index 00000000000000..4ca8569d7feb93 --- /dev/null +++ b/drivers/staging/media/atomisp/pci/system_local.c @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Support for Intel Camera Imaging ISP subsystem. + * Copyright (c) 2015, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include "system_local.h" + +/* ISP */ +const hrt_address ISP_CTRL_BASE[N_ISP_ID] = { + 0x0000000000020000ULL +}; + +const hrt_address ISP_DMEM_BASE[N_ISP_ID] = { + 0x0000000000200000ULL +}; + +const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID] = { + 0x0000000000100000ULL +}; + +/* SP */ +const hrt_address SP_CTRL_BASE[N_SP_ID] = { + 0x0000000000010000ULL +}; + +const hrt_address SP_DMEM_BASE[N_SP_ID] = { + 0x0000000000300000ULL +}; + +/* MMU */ +/* + * MMU0_ID: The data MMU + * MMU1_ID: The icache MMU + */ +const hrt_address MMU_BASE[N_MMU_ID] = { + 0x0000000000070000ULL, + 0x00000000000A0000ULL +}; + +/* DMA */ +const hrt_address DMA_BASE[N_DMA_ID] = { + 0x0000000000040000ULL +}; + +const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID] = { + 0x00000000000CA000ULL +}; + +/* IRQ */ +const hrt_address IRQ_BASE[N_IRQ_ID] = { + 0x0000000000000500ULL, + 0x0000000000030A00ULL, + 0x000000000008C000ULL, + 0x0000000000090200ULL +}; + +/* + 0x0000000000000500ULL}; + */ + +/* GDC */ +const hrt_address GDC_BASE[N_GDC_ID] = { + 0x0000000000050000ULL, + 0x0000000000060000ULL +}; + +/* FIFO_MONITOR (not a subset of GP_DEVICE) */ +const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID] = { + 0x0000000000000000ULL +}; + +/* +const hrt_address GP_REGS_BASE[N_GP_REGS_ID] = { + 0x0000000000000000ULL}; + +const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { + 0x0000000000090000ULL}; +*/ + +/* GP_DEVICE (single base for all separate GP_REG instances) */ +const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID] = { + 0x0000000000000000ULL +}; + +/*GP TIMER , all timer registers are inter-twined, + * so, having multiple base addresses for + * different timers does not help*/ +const hrt_address GP_TIMER_BASE = + (hrt_address)0x0000000000000600ULL; + +/* GPIO */ +const hrt_address GPIO_BASE[N_GPIO_ID] = { + 0x0000000000000400ULL +}; + +/* TIMED_CTRL */ +const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID] = { + 0x0000000000000100ULL +}; + +/* INPUT_FORMATTER */ +const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID] = { + 0x0000000000030000ULL, + 0x0000000000030200ULL, + 0x0000000000030400ULL, + 0x0000000000030600ULL +}; /* memcpy() */ + +/* INPUT_SYSTEM */ +const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID] = { + 0x0000000000080000ULL +}; + +/* 0x0000000000081000ULL, */ /* capture A */ +/* 0x0000000000082000ULL, */ /* capture B */ +/* 0x0000000000083000ULL, */ /* capture C */ +/* 0x0000000000084000ULL, */ /* Acquisition */ +/* 0x0000000000085000ULL, */ /* DMA */ +/* 0x0000000000089000ULL, */ /* ctrl */ +/* 0x000000000008A000ULL, */ /* GP regs */ +/* 0x000000000008B000ULL, */ /* FIFO */ +/* 0x000000000008C000ULL, */ /* IRQ */ + +/* RX, the MIPI lane control regs start at offset 0 */ +const hrt_address RX_BASE[N_RX_ID] = { + 0x0000000000080100ULL +}; + +/* IBUF_CTRL, part of the Input System 2401 */ +const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID] = { + 0x00000000000C1800ULL, /* ibuf controller A */ + 0x00000000000C3800ULL, /* ibuf controller B */ + 0x00000000000C5800ULL /* ibuf controller C */ +}; + +/* ISYS IRQ Controllers, part of the Input System 2401 */ +const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID] = { + 0x00000000000C1400ULL, /* port a */ + 0x00000000000C3400ULL, /* port b */ + 0x00000000000C5400ULL /* port c */ +}; + +/* CSI FE, part of the Input System 2401 */ +const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID] = { + 0x00000000000C0400ULL, /* csi fe controller A */ + 0x00000000000C2400ULL, /* csi fe controller B */ + 0x00000000000C4400ULL /* csi fe controller C */ +}; + +/* CSI BE, part of the Input System 2401 */ +const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID] = { + 0x00000000000C0800ULL, /* csi be controller A */ + 0x00000000000C2800ULL, /* csi be controller B */ + 0x00000000000C4800ULL /* csi be controller C */ +}; + +/* PIXEL Generator, part of the Input System 2401 */ +const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID] = { + 0x00000000000C1000ULL, /* pixel gen controller A */ + 0x00000000000C3000ULL, /* pixel gen controller B */ + 0x00000000000C5000ULL /* pixel gen controller C */ +}; + +/* Stream2MMIO, part of the Input System 2401 */ +const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID] = { + 0x00000000000C0C00ULL, /* stream2mmio controller A */ + 0x00000000000C2C00ULL, /* stream2mmio controller B */ + 0x00000000000C4C00ULL /* stream2mmio controller C */ +}; diff --git a/drivers/staging/media/atomisp/pci/system_local.h b/drivers/staging/media/atomisp/pci/system_local.h index dfcc4c2b8f16ce..a47258c2e8a871 100644 --- a/drivers/staging/media/atomisp/pci/system_local.h +++ b/drivers/staging/media/atomisp/pci/system_local.h @@ -1,11 +1,103 @@ /* SPDX-License-Identifier: GPL-2.0 */ -// SPDX-License-Identifier: GPL-2.0-or-later /* - * (c) 2020 Mauro Carvalho Chehab <mchehab+huawei@kernel.org> + * Support for Intel Camera Imaging ISP subsystem. + * Copyright (c) 2015, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. */ -#ifdef ISP2401 -# include "isp2401_system_local.h" -#else -# include "isp2400_system_local.h" +#ifndef __SYSTEM_LOCAL_H_INCLUDED__ +#define __SYSTEM_LOCAL_H_INCLUDED__ + +#ifdef HRT_ISP_CSS_CUSTOM_HOST +#ifndef HRT_USE_VIR_ADDRS +#define HRT_USE_VIR_ADDRS +#endif #endif + +#include "system_global.h" + +/* This interface is deprecated */ +#include "hive_types.h" + +/* + * Cell specific address maps + */ + +#define GP_FIFO_BASE ((hrt_address)0x0000000000090104) /* This is NOT a base address */ + +/* ISP */ +extern const hrt_address ISP_CTRL_BASE[N_ISP_ID]; +extern const hrt_address ISP_DMEM_BASE[N_ISP_ID]; +extern const hrt_address ISP_BAMEM_BASE[N_BAMEM_ID]; + +/* SP */ +extern const hrt_address SP_CTRL_BASE[N_SP_ID]; +extern const hrt_address SP_DMEM_BASE[N_SP_ID]; + +/* MMU */ + +extern const hrt_address MMU_BASE[N_MMU_ID]; + +/* DMA */ +extern const hrt_address DMA_BASE[N_DMA_ID]; +extern const hrt_address ISYS2401_DMA_BASE[N_ISYS2401_DMA_ID]; + +/* IRQ */ +extern const hrt_address IRQ_BASE[N_IRQ_ID]; + +/* GDC */ +extern const hrt_address GDC_BASE[N_GDC_ID]; + +/* FIFO_MONITOR (not a subset of GP_DEVICE) */ +extern const hrt_address FIFO_MONITOR_BASE[N_FIFO_MONITOR_ID]; + +/* GP_DEVICE (single base for all separate GP_REG instances) */ +extern const hrt_address GP_DEVICE_BASE[N_GP_DEVICE_ID]; + +/*GP TIMER , all timer registers are inter-twined, + * so, having multiple base addresses for + * different timers does not help*/ +extern const hrt_address GP_TIMER_BASE; + +/* GPIO */ +extern const hrt_address GPIO_BASE[N_GPIO_ID]; + +/* TIMED_CTRL */ +extern const hrt_address TIMED_CTRL_BASE[N_TIMED_CTRL_ID]; + +/* INPUT_FORMATTER */ +extern const hrt_address INPUT_FORMATTER_BASE[N_INPUT_FORMATTER_ID]; + +/* INPUT_SYSTEM */ +extern const hrt_address INPUT_SYSTEM_BASE[N_INPUT_SYSTEM_ID]; + +/* RX, the MIPI lane control regs start at offset 0 */ +extern const hrt_address RX_BASE[N_RX_ID]; + +/* IBUF_CTRL, part of the Input System 2401 */ +extern const hrt_address IBUF_CTRL_BASE[N_IBUF_CTRL_ID]; + +/* ISYS IRQ Controllers, part of the Input System 2401 */ +extern const hrt_address ISYS_IRQ_BASE[N_ISYS_IRQ_ID]; + +/* CSI FE, part of the Input System 2401 */ +extern const hrt_address CSI_RX_FE_CTRL_BASE[N_CSI_RX_FRONTEND_ID]; + +/* CSI BE, part of the Input System 2401 */ +extern const hrt_address CSI_RX_BE_CTRL_BASE[N_CSI_RX_BACKEND_ID]; + +/* PIXEL Generator, part of the Input System 2401 */ +extern const hrt_address PIXELGEN_CTRL_BASE[N_PIXELGEN_ID]; + +/* Stream2MMIO, part of the Input System 2401 */ +extern const hrt_address STREAM2MMIO_CTRL_BASE[N_STREAM2MMIO_ID]; + +#endif /* __SYSTEM_LOCAL_H_INCLUDED__ */ |