mmc: atmel-mci: indentation

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

1 files changed, 68 insertions, 68 deletions

diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index 8574e910d1f886..7310b207a4423e 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -18,103 +18,103 @@
 
 /* MCI Register Definitions */
 #define ATMCI_CR			0x0000	/* Control */
-# define ATMCI_CR_MCIEN		(  1 <<  0)	/* MCI Enable */
+# define ATMCI_CR_MCIEN			(  1 <<  0)	/* MCI Enable */
 # define ATMCI_CR_MCIDIS		(  1 <<  1)	/* MCI Disable */
-# define ATMCI_CR_PWSEN		(  1 <<  2)	/* Power Save Enable */
+# define ATMCI_CR_PWSEN			(  1 <<  2)	/* Power Save Enable */
 # define ATMCI_CR_PWSDIS		(  1 <<  3)	/* Power Save Disable */
-# define ATMCI_CR_SWRST		(  1 <<  7)	/* Software Reset */
+# define ATMCI_CR_SWRST			(  1 <<  7)	/* Software Reset */
 #define ATMCI_MR			0x0004	/* Mode */
-# define ATMCI_MR_CLKDIV(x)	((x) <<  0)	/* Clock Divider */
-# define ATMCI_MR_PWSDIV(x)	((x) <<  8)	/* Power Saving Divider */
+# define ATMCI_MR_CLKDIV(x)		((x) <<  0)	/* Clock Divider */
+# define ATMCI_MR_PWSDIV(x)		((x) <<  8)	/* Power Saving Divider */
 # define ATMCI_MR_RDPROOF		(  1 << 11)	/* Read Proof */
 # define ATMCI_MR_WRPROOF		(  1 << 12)	/* Write Proof */
-# define ATMCI_MR_PDCFBYTE	(  1 << 13)	/* Force Byte Transfer */
+# define ATMCI_MR_PDCFBYTE		(  1 << 13)	/* Force Byte Transfer */
 # define ATMCI_MR_PDCPADV		(  1 << 14)	/* Padding Value */
 # define ATMCI_MR_PDCMODE		(  1 << 15)	/* PDC-oriented Mode */
-#define ATMCI_DTOR		0x0008	/* Data Timeout */
+#define ATMCI_DTOR			0x0008	/* Data Timeout */
 # define ATMCI_DTOCYC(x)		((x) <<  0)	/* Data Timeout Cycles */
 # define ATMCI_DTOMUL(x)		((x) <<  4)	/* Data Timeout Multiplier */
-#define ATMCI_SDCR		0x000c	/* SD Card / SDIO */
-# define ATMCI_SDCSEL_SLOT_A	(  0 <<  0)	/* Select SD slot A */
-# define ATMCI_SDCSEL_SLOT_B	(  1 <<  0)	/* Select SD slot A */
-# define ATMCI_SDCSEL_MASK	(  3 <<  0)
-# define ATMCI_SDCBUS_1BIT	(  0 <<  6)	/* 1-bit data bus */
-# define ATMCI_SDCBUS_4BIT	(  2 <<  6)	/* 4-bit data bus */
-# define ATMCI_SDCBUS_8BIT	(  3 <<  6)	/* 8-bit data bus[2] */
-# define ATMCI_SDCBUS_MASK	(  3 <<  6)
-#define ATMCI_ARGR		0x0010	/* Command Argument */
-#define ATMCI_CMDR		0x0014	/* Command */
-# define ATMCI_CMDR_CMDNB(x)	((x) <<  0)	/* Command Opcode */
-# define ATMCI_CMDR_RSPTYP_NONE	(  0 <<  6)	/* No response */
+#define ATMCI_SDCR			0x000c	/* SD Card / SDIO */
+# define ATMCI_SDCSEL_SLOT_A		(  0 <<  0)	/* Select SD slot A */
+# define ATMCI_SDCSEL_SLOT_B		(  1 <<  0)	/* Select SD slot A */
+# define ATMCI_SDCSEL_MASK		(  3 <<  0)
+# define ATMCI_SDCBUS_1BIT		(  0 <<  6)	/* 1-bit data bus */
+# define ATMCI_SDCBUS_4BIT		(  2 <<  6)	/* 4-bit data bus */
+# define ATMCI_SDCBUS_8BIT		(  3 <<  6)	/* 8-bit data bus[2] */
+# define ATMCI_SDCBUS_MASK		(  3 <<  6)
+#define ATMCI_ARGR			0x0010	/* Command Argument */
+#define ATMCI_CMDR			0x0014	/* Command */
+# define ATMCI_CMDR_CMDNB(x)		((x) <<  0)	/* Command Opcode */
+# define ATMCI_CMDR_RSPTYP_NONE		(  0 <<  6)	/* No response */
 # define ATMCI_CMDR_RSPTYP_48BIT	(  1 <<  6)	/* 48-bit response */
 # define ATMCI_CMDR_RSPTYP_136BIT	(  2 <<  6)	/* 136-bit response */
-# define ATMCI_CMDR_SPCMD_INIT	(  1 <<  8)	/* Initialization command */
-# define ATMCI_CMDR_SPCMD_SYNC	(  2 <<  8)	/* Synchronized command */
-# define ATMCI_CMDR_SPCMD_INT	(  4 <<  8)	/* Interrupt command */
+# define ATMCI_CMDR_SPCMD_INIT		(  1 <<  8)	/* Initialization command */
+# define ATMCI_CMDR_SPCMD_SYNC		(  2 <<  8)	/* Synchronized command */
+# define ATMCI_CMDR_SPCMD_INT		(  4 <<  8)	/* Interrupt command */
 # define ATMCI_CMDR_SPCMD_INTRESP	(  5 <<  8)	/* Interrupt response */
-# define ATMCI_CMDR_OPDCMD	(  1 << 11)	/* Open Drain */
-# define ATMCI_CMDR_MAXLAT_5CYC	(  0 << 12)	/* Max latency 5 cycles */
+# define ATMCI_CMDR_OPDCMD		(  1 << 11)	/* Open Drain */
+# define ATMCI_CMDR_MAXLAT_5CYC		(  0 << 12)	/* Max latency 5 cycles */
 # define ATMCI_CMDR_MAXLAT_64CYC	(  1 << 12)	/* Max latency 64 cycles */
-# define ATMCI_CMDR_START_XFER	(  1 << 16)	/* Start data transfer */
-# define ATMCI_CMDR_STOP_XFER	(  2 << 16)	/* Stop data transfer */
-# define ATMCI_CMDR_TRDIR_WRITE	(  0 << 18)	/* Write data */
-# define ATMCI_CMDR_TRDIR_READ	(  1 << 18)	/* Read data */
+# define ATMCI_CMDR_START_XFER		(  1 << 16)	/* Start data transfer */
+# define ATMCI_CMDR_STOP_XFER		(  2 << 16)	/* Stop data transfer */
+# define ATMCI_CMDR_TRDIR_WRITE		(  0 << 18)	/* Write data */
+# define ATMCI_CMDR_TRDIR_READ		(  1 << 18)	/* Read data */
 # define ATMCI_CMDR_BLOCK		(  0 << 19)	/* Single-block transfer */
-# define ATMCI_CMDR_MULTI_BLOCK	(  1 << 19)	/* Multi-block transfer */
-# define ATMCI_CMDR_STREAM	(  2 << 19)	/* MMC Stream transfer */
-# define ATMCI_CMDR_SDIO_BYTE	(  4 << 19)	/* SDIO Byte transfer */
-# define ATMCI_CMDR_SDIO_BLOCK	(  5 << 19)	/* SDIO Block transfer */
+# define ATMCI_CMDR_MULTI_BLOCK		(  1 << 19)	/* Multi-block transfer */
+# define ATMCI_CMDR_STREAM		(  2 << 19)	/* MMC Stream transfer */
+# define ATMCI_CMDR_SDIO_BYTE		(  4 << 19)	/* SDIO Byte transfer */
+# define ATMCI_CMDR_SDIO_BLOCK		(  5 << 19)	/* SDIO Block transfer */
 # define ATMCI_CMDR_SDIO_SUSPEND	(  1 << 24)	/* SDIO Suspend Command */
-# define ATMCI_CMDR_SDIO_RESUME	(  2 << 24)	/* SDIO Resume Command */
-#define ATMCI_BLKR		0x0018	/* Block */
-# define ATMCI_BCNT(x)		((x) <<  0)	/* Data Block Count */
+# define ATMCI_CMDR_SDIO_RESUME		(  2 << 24)	/* SDIO Resume Command */
+#define ATMCI_BLKR			0x0018	/* Block */
+# define ATMCI_BCNT(x)			((x) <<  0)	/* Data Block Count */
 # define ATMCI_BLKLEN(x)		((x) << 16)	/* Data Block Length */
-#define ATMCI_CSTOR		0x001c	/* Completion Signal Timeout[2] */
+#define ATMCI_CSTOR			0x001c	/* Completion Signal Timeout[2] */
 # define ATMCI_CSTOCYC(x)		((x) <<  0)	/* CST cycles */
 # define ATMCI_CSTOMUL(x)		((x) <<  4)	/* CST multiplier */
-#define ATMCI_RSPR		0x0020	/* Response 0 */
-#define ATMCI_RSPR1		0x0024	/* Response 1 */
-#define ATMCI_RSPR2		0x0028	/* Response 2 */
-#define ATMCI_RSPR3		0x002c	/* Response 3 */
+#define ATMCI_RSPR			0x0020	/* Response 0 */
+#define ATMCI_RSPR1			0x0024	/* Response 1 */
+#define ATMCI_RSPR2			0x0028	/* Response 2 */
+#define ATMCI_RSPR3			0x002c	/* Response 3 */
 #define ATMCI_RDR			0x0030	/* Receive Data */
 #define ATMCI_TDR			0x0034	/* Transmit Data */
 #define ATMCI_SR			0x0040	/* Status */
 #define ATMCI_IER			0x0044	/* Interrupt Enable */
 #define ATMCI_IDR			0x0048	/* Interrupt Disable */
 #define ATMCI_IMR			0x004c	/* Interrupt Mask */
-# define ATMCI_CMDRDY		(  1 <<   0)	/* Command Ready */
-# define ATMCI_RXRDY		(  1 <<   1)	/* Receiver Ready */
-# define ATMCI_TXRDY		(  1 <<   2)	/* Transmitter Ready */
-# define ATMCI_BLKE		(  1 <<   3)	/* Data Block Ended */
-# define ATMCI_DTIP		(  1 <<   4)	/* Data Transfer In Progress */
-# define ATMCI_NOTBUSY		(  1 <<   5)	/* Data Not Busy */
-# define ATMCI_SDIOIRQA		(  1 <<   8)	/* SDIO IRQ in slot A */
-# define ATMCI_SDIOIRQB		(  1 <<   9)	/* SDIO IRQ in slot B */
-# define ATMCI_RINDE		(  1 <<  16)	/* Response Index Error */
-# define ATMCI_RDIRE		(  1 <<  17)	/* Response Direction Error */
-# define ATMCI_RCRCE		(  1 <<  18)	/* Response CRC Error */
-# define ATMCI_RENDE		(  1 <<  19)	/* Response End Bit Error */
-# define ATMCI_RTOE		(  1 <<  20)	/* Response Time-Out Error */
-# define ATMCI_DCRCE		(  1 <<  21)	/* Data CRC Error */
-# define ATMCI_DTOE		(  1 <<  22)	/* Data Time-Out Error */
-# define ATMCI_OVRE		(  1 <<  30)	/* RX Overrun Error */
-# define ATMCI_UNRE		(  1 <<  31)	/* TX Underrun Error */
+# define ATMCI_CMDRDY			(  1 <<   0)	/* Command Ready */
+# define ATMCI_RXRDY			(  1 <<   1)	/* Receiver Ready */
+# define ATMCI_TXRDY			(  1 <<   2)	/* Transmitter Ready */
+# define ATMCI_BLKE			(  1 <<   3)	/* Data Block Ended */
+# define ATMCI_DTIP			(  1 <<   4)	/* Data Transfer In Progress */
+# define ATMCI_NOTBUSY			(  1 <<   5)	/* Data Not Busy */
+# define ATMCI_SDIOIRQA			(  1 <<   8)	/* SDIO IRQ in slot A */
+# define ATMCI_SDIOIRQB			(  1 <<   9)	/* SDIO IRQ in slot B */
+# define ATMCI_RINDE			(  1 <<  16)	/* Response Index Error */
+# define ATMCI_RDIRE			(  1 <<  17)	/* Response Direction Error */
+# define ATMCI_RCRCE			(  1 <<  18)	/* Response CRC Error */
+# define ATMCI_RENDE			(  1 <<  19)	/* Response End Bit Error */
+# define ATMCI_RTOE			(  1 <<  20)	/* Response Time-Out Error */
+# define ATMCI_DCRCE			(  1 <<  21)	/* Data CRC Error */
+# define ATMCI_DTOE			(  1 <<  22)	/* Data Time-Out Error */
+# define ATMCI_OVRE			(  1 <<  30)	/* RX Overrun Error */
+# define ATMCI_UNRE			(  1 <<  31)	/* TX Underrun Error */
 #define ATMCI_DMA			0x0050	/* DMA Configuration[2] */
-# define ATMCI_DMA_OFFSET(x)	((x) <<  0)	/* DMA Write Buffer Offset */
-# define ATMCI_DMA_CHKSIZE(x)	((x) <<  4)	/* DMA Channel Read and Write Chunk Size */
-# define ATMCI_DMAEN		(  1 <<  8)	/* DMA Hardware Handshaking Enable */
+# define ATMCI_DMA_OFFSET(x)		((x) <<  0)	/* DMA Write Buffer Offset */
+# define ATMCI_DMA_CHKSIZE(x)		((x) <<  4)	/* DMA Channel Read and Write Chunk Size */
+# define ATMCI_DMAEN			(  1 <<  8)	/* DMA Hardware Handshaking Enable */
 #define ATMCI_CFG			0x0054	/* Configuration[2] */
 # define ATMCI_CFG_FIFOMODE_1DATA	(  1 <<  0)	/* MCI Internal FIFO control mode */
-# define ATMCI_CFG_FERRCTRL_COR	(  1 <<  4)	/* Flow Error flag reset control mode */
+# define ATMCI_CFG_FERRCTRL_COR		(  1 <<  4)	/* Flow Error flag reset control mode */
 # define ATMCI_CFG_HSMODE		(  1 <<  8)	/* High Speed Mode */
 # define ATMCI_CFG_LSYNC		(  1 << 12)	/* Synchronize on the last block */
-#define ATMCI_WPMR		0x00e4	/* Write Protection Mode[2] */
-# define ATMCI_WP_EN		(  1 <<  0)	/* WP Enable */
-# define ATMCI_WP_KEY		(0x4d4349 << 8)	/* WP Key */
-#define ATMCI_WPSR		0x00e8	/* Write Protection Status[2] */
-# define ATMCI_GET_WP_VS(x)	((x) & 0x0f)
-# define ATMCI_GET_WP_VSRC(x)	(((x) >> 8) & 0xffff)
-#define ATMCI_FIFO_APERTURE	0x0200	/* FIFO Aperture[2] */
+#define ATMCI_WPMR			0x00e4	/* Write Protection Mode[2] */
+# define ATMCI_WP_EN			(  1 <<  0)	/* WP Enable */
+# define ATMCI_WP_KEY			(0x4d4349 << 8)	/* WP Key */
+#define ATMCI_WPSR			0x00e8	/* Write Protection Status[2] */
+# define ATMCI_GET_WP_VS(x)		((x) & 0x0f)
+# define ATMCI_GET_WP_VSRC(x)		(((x) >> 8) & 0xffff)
+#define ATMCI_FIFO_APERTURE		0x0200	/* FIFO Aperture[2] */
 
 /* This is not including the FIFO Aperture on MCI2 */
 #define ATMCI_REGS_SIZE		0x100