Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

Pull hwmon updates from Jean Delvare:
 "We have support for the MCP3021, MC13892 and GMT G781, automatic fan
  speed control for LM63/LM64 chips, and a few clean-ups."

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: Add MCP3021 ADC driver
  hwmon: (mc13783-adc) Add support for the MC13892 PMIC
  hwmon: (mc13783-adc) Remove space before tab
  hwmon: (lm63) Let the user adjust the lookup table
  hwmon: (lm63) Make fan speed control strategy changeable
  hwmon: (lm63) Reorganize the code
  hwmon: (lm90) Restore original configuration if probe function fails
  hwmon: (lm90) Add support for GMT G781
  hwmon: (lm90) Fix multi-line comments
  hwmon: (w83795) Fix multi-line comments
  hwmon: (w83795) Unconditionally support manual fan speed control
  hwmon: (fam15h_power) Increase output resolution
  hwmon: (fam15h_power) Correct sign extension of running_avg_capture

11 files changed, 826 insertions, 379 deletions

diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index 9cd14cfe6515e3..b466974e142fc3 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -118,6 +118,10 @@ Supported chips:
     Addresses scanned: I2C 0x48 through 0x4F
     Datasheet: Publicly available at NXP website
                http://ics.nxp.com/products/interface/datasheet/sa56004x.pdf
+  * GMT G781
+    Prefix: 'g781'
+    Addresses scanned: I2C 0x4c, 0x4d
+    Datasheet: Not publicly available from GMT
 
 Author: Jean Delvare <khali@linux-fr.org>
 
diff --git a/Documentation/hwmon/mc13783-adc b/Documentation/hwmon/mc13783-adc
index 044531a864054a..d0e7b3fa9e7539 100644
--- a/Documentation/hwmon/mc13783-adc
+++ b/Documentation/hwmon/mc13783-adc
@@ -3,8 +3,11 @@ Kernel driver mc13783-adc
 
 Supported chips:
   * Freescale Atlas MC13783
-    Prefix: 'mc13783_adc'
+    Prefix: 'mc13783'
     Datasheet: http://www.freescale.com/files/rf_if/doc/data_sheet/MC13783.pdf?fsrch=1
+  * Freescale Atlas MC13892
+    Prefix: 'mc13892'
+    Datasheet: http://cache.freescale.com/files/analog/doc/data_sheet/MC13892.pdf?fsrch=1&sr=1
 
 Authors:
     Sascha Hauer <s.hauer@pengutronix.de>
@@ -13,20 +16,21 @@ Authors:
 Description
 -----------
 
-The Freescale MC13783 is a Power Management and Audio Circuit. Among
-other things it contains a 10-bit A/D converter. The converter has 16
-channels which can be used in different modes.
-The A/D converter has a resolution of 2.25mV. Channels 0-4 have
-a dedicated meaning with chip internal scaling applied. Channels 5-7
-can be used as general purpose inputs or alternatively in a dedicated
-mode. Channels 12-15 are occupied by the touchscreen if it's active.
+The Freescale MC13783 and MC13892 are Power Management and Audio Circuits.
+Among other things they contain a 10-bit A/D converter. The converter has 16
+(MC13783) resp. 12 (MC13892) channels which can be used in different modes. The
+A/D converter has a resolution of 2.25mV.
 
-Currently the driver only supports channels 2 and 5-15 with no alternative
-modes for channels 5-7.
+Some channels can be used as General Purpose inputs or in a dedicated mode with
+a chip internal scaling applied .
 
-See this table for the meaning of the different channels and their chip
-internal scaling:
+Currently the driver only supports the Application Supply channel (BP / BPSNS),
+the General Purpose inputs and touchscreen.
 
+See the following tables for the meaning of the different channels and their
+chip internal scaling:
+
+MC13783:
 Channel	Signal						Input Range	Scaling
 -------------------------------------------------------------------------------
 0	Battery Voltage (BATT)				2.50 - 4.65V	-2.40V
@@ -34,7 +38,7 @@ Channel	Signal						Input Range	Scaling
 2	Application Supply (BP)				2.50 - 4.65V	-2.40V
 3	Charger Voltage (CHRGRAW)			0 - 10V /	/5
 							0 - 20V		/10
-4	Charger Current (CHRGISNSP-CHRGISNSN)		-0.25V - 0.25V	x4
+4	Charger Current (CHRGISNSP-CHRGISNSN)		-0.25 - 0.25V	x4
 5	General Purpose ADIN5 / Battery Pack Thermistor	0 - 2.30V	No
 6	General Purpose ADIN6 / Backup Voltage (LICELL)	0 - 2.30V /	No /
 							1.50 - 3.50V	-1.20V
@@ -48,3 +52,23 @@ Channel	Signal						Input Range	Scaling
 13	General Purpose TSX2 / Touchscreen X-plate 2	0 - 2.30V	No
 14	General Purpose TSY1 / Touchscreen Y-plate 1	0 - 2.30V	No
 15	General Purpose TSY2 / Touchscreen Y-plate 2	0 - 2.30V	No
+
+MC13892:
+Channel	Signal						Input Range	Scaling
+-------------------------------------------------------------------------------
+0	Battery Voltage (BATT)				0 - 4.8V	/2
+1	Battery Current (BATT - BATTISNSCC)		-60 - 60 mV	x20
+2	Application Supply (BPSNS)			0 - 4.8V	/2
+3	Charger Voltage (CHRGRAW)			0 - 12V /	/5
+							0 - 20V		/10
+4	Charger Current (CHRGISNS-BPSNS) /		-0.3 - 0.3V /	x4 /
+	Touchscreen X-plate 1				0 - 2.4V	No
+5	General Purpose ADIN5 /	Battery Pack Thermistor	0 - 2.4V	No
+6	General Purpose ADIN6 / Backup Voltage (LICELL)	0 - 2.4V /	No
+	Backup Voltage (LICELL)                        	0 - 3.6V	x2/3
+7	General Purpose ADIN7 / UID / Die Temperature	0 - 2.4V /	No /
+							0 - 4.8V	/2
+12	General Purpose TSX1 / Touchscreen X-plate 1	0 - 2.4V	No
+13	General Purpose TSX2 / Touchscreen X-plate 2	0 - 2.4V	No
+14	General Purpose TSY1 / Touchscreen Y-plate 1	0 - 2.4V	No
+15	General Purpose TSY2 / Touchscreen Y-plate 2	0 - 2.4V	No
diff --git a/Documentation/hwmon/mcp3021 b/Documentation/hwmon/mcp3021
new file mode 100644
index 00000000000000..325fd87e81b22e
--- /dev/null
+++ b/Documentation/hwmon/mcp3021
@@ -0,0 +1,22 @@
+Kernel driver MCP3021
+======================
+
+Supported chips:
+  * Microchip Technology MCP3021
+    Prefix: 'mcp3021'
+    Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/21805a.pdf
+
+Author: Mingkai Hu
+
+Description
+-----------
+
+This driver implements support for the Microchip Technology MCP3021 chip.
+
+The Microchip Technology Inc. MCP3021 is a successive approximation A/D
+converter (ADC) with 10-bit resolution.
+This device provides one single-ended input with very low power consumption.
+Communication to the MCP3021 is performed using a 2-wire I2C compatible
+interface. Standard (100 kHz) and Fast (400 kHz) I2C modes are available.
+The default I2C device address is 0x4d (contact the Microchip factory for
+additional address options).
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 811e6c47e7e676..5b32d56dbb4dcc 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -648,7 +648,8 @@ config SENSORS_LM90
 	  LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
 	  Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 	  MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
-	  Winbond/Nuvoton W83L771W/G/AWG/ASG and Philips SA56004 sensor chips.
+	  Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
+	  sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm90.
@@ -812,6 +813,16 @@ config SENSORS_MAX6650
 	  This driver can also be built as a module.  If so, the module
 	  will be called max6650.
 
+config SENSORS_MCP3021
+	tristate "Microchip MCP3021"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the MCP3021 chip
+	  that is a A/D converter (ADC) with 10-bit resolution.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called mcp3021.
+
 config SENSORS_NTC_THERMISTOR
 	tristate "NTC thermistor support"
 	depends on EXPERIMENTAL
@@ -1229,18 +1240,19 @@ config SENSORS_W83795
 	depends on I2C && EXPERIMENTAL
 	help
 	  If you say yes here you get support for the Winbond W83795G and
-	  W83795ADG hardware monitoring chip.
+	  W83795ADG hardware monitoring chip, including manual fan speed
+	  control.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called w83795.
 
 config SENSORS_W83795_FANCTRL
-	boolean "Include fan control support (DANGEROUS)"
+	boolean "Include automatic fan control support (DANGEROUS)"
 	depends on SENSORS_W83795 && EXPERIMENTAL
 	default n
 	help
-	  If you say yes here, support for the both manual and automatic
-	  fan control features will be included in the driver.
+	  If you say yes here, support for automatic fan speed control
+	  will be included in the driver.
 
 	  This part of the code wasn't carefully reviewed and tested yet,
 	  so enabling this option is strongly discouraged on production
@@ -1358,10 +1370,10 @@ config SENSORS_APPLESMC
 	  the awesome power of applesmc.
 
 config SENSORS_MC13783_ADC
-        tristate "Freescale MC13783 ADC"
-        depends on MFD_MC13783
+        tristate "Freescale MC13783/MC13892 ADC"
+        depends on MFD_MC13XXX
         help
-          Support for the A/D converter on MC13783 PMIC.
+          Support for the A/D converter on MC13783 and MC13892 PMIC.
 
 if ACPI
 
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 8251ce8cd035ec..6d3f11f7181535 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_SENSORS_MAX6639)	+= max6639.o
 obj-$(CONFIG_SENSORS_MAX6642)	+= max6642.o
 obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
 obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
+obj-$(CONFIG_SENSORS_MCP3021)	+= mcp3021.o
 obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
index 523f8fb9e7d924..b7494af1e4a9ba 100644
--- a/drivers/hwmon/fam15h_power.c
+++ b/drivers/hwmon/fam15h_power.c
@@ -60,15 +60,15 @@ static ssize_t show_power(struct device *dev,
 	pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
 				  REG_TDP_RUNNING_AVERAGE, &val);
 	running_avg_capture = (val >> 4) & 0x3fffff;
-	running_avg_capture = sign_extend32(running_avg_capture, 22);
-	running_avg_range = val & 0xf;
+	running_avg_capture = sign_extend32(running_avg_capture, 21);
+	running_avg_range = (val & 0xf) + 1;
 
 	pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
 				  REG_TDP_LIMIT3, &val);
 
 	tdp_limit = val >> 16;
-	curr_pwr_watts = tdp_limit + data->base_tdp -
-		(s32)(running_avg_capture >> (running_avg_range + 1));
+	curr_pwr_watts = (tdp_limit + data->base_tdp) << running_avg_range;
+	curr_pwr_watts -= running_avg_capture;
 	curr_pwr_watts *= data->tdp_to_watts;
 
 	/*
@@ -78,7 +78,7 @@ static ssize_t show_power(struct device *dev,
 	 * scaling factor 1/(2^16).  For conversion we use
 	 * (10^6)/(2^16) = 15625/(2^10)
 	 */
-	curr_pwr_watts = (curr_pwr_watts * 15625) >> 10;
+	curr_pwr_watts = (curr_pwr_watts * 15625) >> (10 + running_avg_range);
 	return sprintf(buf, "%u\n", (unsigned int) curr_pwr_watts);
 }
 static DEVICE_ATTR(power1_input, S_IRUGO, show_power, NULL);
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 15c05cc83e2c03..602a0f0b0de8ba 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -148,46 +148,9 @@ static const unsigned short normal_i2c[] = { 0x18, 0x4c, 0x4e, I2C_CLIENT_END };
 #define UPDATE_INTERVAL(max, rate) \
 			((1000 << (LM63_MAX_CONVRATE - (rate))) / (max))
 
-/*
- * Functions declaration
- */
-
-static int lm63_probe(struct i2c_client *client,
-		      const struct i2c_device_id *id);
-static int lm63_remove(struct i2c_client *client);
-
-static struct lm63_data *lm63_update_device(struct device *dev);
-
-static int lm63_detect(struct i2c_client *client, struct i2c_board_info *info);
-static void lm63_init_client(struct i2c_client *client);
-
 enum chips { lm63, lm64, lm96163 };
 
 /*
- * Driver data (common to all clients)
- */
-
-static const struct i2c_device_id lm63_id[] = {
-	{ "lm63", lm63 },
-	{ "lm64", lm64 },
-	{ "lm96163", lm96163 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, lm63_id);
-
-static struct i2c_driver lm63_driver = {
-	.class		= I2C_CLASS_HWMON,
-	.driver = {
-		.name	= "lm63",
-	},
-	.probe		= lm63_probe,
-	.remove		= lm63_remove,
-	.id_table	= lm63_id,
-	.detect		= lm63_detect,
-	.address_list	= normal_i2c,
-};
-
-/*
  * Client data (each client gets its own)
  */
 
@@ -242,6 +205,145 @@ static inline int lut_temp_from_reg(struct lm63_data *data, int nr)
 	return data->temp8[nr] * (data->lut_temp_highres ? 500 : 1000);
 }
 
+static inline int lut_temp_to_reg(struct lm63_data *data, long val)
+{
+	val -= data->temp2_offset;
+	if (data->lut_temp_highres)
+		return DIV_ROUND_CLOSEST(SENSORS_LIMIT(val, 0, 127500), 500);
+	else
+		return DIV_ROUND_CLOSEST(SENSORS_LIMIT(val, 0, 127000), 1000);
+}
+
+/*
+ * Update the lookup table register cache.
+ * client->update_lock must be held when calling this function.
+ */
+static void lm63_update_lut(struct i2c_client *client)
+{
+	struct lm63_data *data = i2c_get_clientdata(client);
+	int i;
+
+	if (time_after(jiffies, data->lut_last_updated + 5 * HZ) ||
+	    !data->lut_valid) {
+		for (i = 0; i < data->lut_size; i++) {
+			data->pwm1[1 + i] = i2c_smbus_read_byte_data(client,
+					    LM63_REG_LUT_PWM(i));
+			data->temp8[3 + i] = i2c_smbus_read_byte_data(client,
+					     LM63_REG_LUT_TEMP(i));
+		}
+		data->lut_temp_hyst = i2c_smbus_read_byte_data(client,
+				      LM63_REG_LUT_TEMP_HYST);
+
+		data->lut_last_updated = jiffies;
+		data->lut_valid = 1;
+	}
+}
+
+static struct lm63_data *lm63_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm63_data *data = i2c_get_clientdata(client);
+	unsigned long next_update;
+
+	mutex_lock(&data->update_lock);
+
+	next_update = data->last_updated
+	  + msecs_to_jiffies(data->update_interval) + 1;
+
+	if (time_after(jiffies, next_update) || !data->valid) {
+		if (data->config & 0x04) { /* tachometer enabled  */
+			/* order matters for fan1_input */
+			data->fan[0] = i2c_smbus_read_byte_data(client,
+				       LM63_REG_TACH_COUNT_LSB) & 0xFC;
+			data->fan[0] |= i2c_smbus_read_byte_data(client,
+					LM63_REG_TACH_COUNT_MSB) << 8;
+			data->fan[1] = (i2c_smbus_read_byte_data(client,
+					LM63_REG_TACH_LIMIT_LSB) & 0xFC)
+				     | (i2c_smbus_read_byte_data(client,
+					LM63_REG_TACH_LIMIT_MSB) << 8);
+		}
+
+		data->pwm1_freq = i2c_smbus_read_byte_data(client,
+				  LM63_REG_PWM_FREQ);
+		if (data->pwm1_freq == 0)
+			data->pwm1_freq = 1;
+		data->pwm1[0] = i2c_smbus_read_byte_data(client,
+				LM63_REG_PWM_VALUE);
+
+		data->temp8[0] = i2c_smbus_read_byte_data(client,
+				 LM63_REG_LOCAL_TEMP);
+		data->temp8[1] = i2c_smbus_read_byte_data(client,
+				 LM63_REG_LOCAL_HIGH);
+
+		/* order matters for temp2_input */
+		data->temp11[0] = i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_TEMP_MSB) << 8;
+		data->temp11[0] |= i2c_smbus_read_byte_data(client,
+				   LM63_REG_REMOTE_TEMP_LSB);
+		data->temp11[1] = (i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_LOW_MSB) << 8)
+				| i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_LOW_LSB);
+		data->temp11[2] = (i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_HIGH_MSB) << 8)
+				| i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_HIGH_LSB);
+		data->temp11[3] = (i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_OFFSET_MSB) << 8)
+				| i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_OFFSET_LSB);
+
+		if (data->kind == lm96163)
+			data->temp11u = (i2c_smbus_read_byte_data(client,
+					LM96163_REG_REMOTE_TEMP_U_MSB) << 8)
+				      | i2c_smbus_read_byte_data(client,
+					LM96163_REG_REMOTE_TEMP_U_LSB);
+
+		data->temp8[2] = i2c_smbus_read_byte_data(client,
+				 LM63_REG_REMOTE_TCRIT);
+		data->temp2_crit_hyst = i2c_smbus_read_byte_data(client,
+					LM63_REG_REMOTE_TCRIT_HYST);
+
+		data->alarms = i2c_smbus_read_byte_data(client,
+			       LM63_REG_ALERT_STATUS) & 0x7F;
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	lm63_update_lut(client);
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+/*
+ * Trip points in the lookup table should be in ascending order for both
+ * temperatures and PWM output values.
+ */
+static int lm63_lut_looks_bad(struct i2c_client *client)
+{
+	struct lm63_data *data = i2c_get_clientdata(client);
+	int i;
+
+	mutex_lock(&data->update_lock);
+	lm63_update_lut(client);
+
+	for (i = 1; i < data->lut_size; i++) {
+		if (data->pwm1[1 + i - 1] > data->pwm1[1 + i]
+		 || data->temp8[3 + i - 1] > data->temp8[3 + i]) {
+			dev_warn(&client->dev,
+				 "Lookup table doesn't look sane (check entries %d and %d)\n",
+				 i, i + 1);
+			break;
+		}
+	}
+	mutex_unlock(&data->update_lock);
+
+	return i == data->lut_size ? 0 : 1;
+}
+
 /*
  * Sysfs callback functions and files
  */
@@ -294,13 +396,16 @@ static ssize_t show_pwm1(struct device *dev, struct device_attribute *devattr,
 	return sprintf(buf, "%d\n", pwm);
 }
 
-static ssize_t set_pwm1(struct device *dev, struct device_attribute *dummy,
+static ssize_t set_pwm1(struct device *dev, struct device_attribute *devattr,
 			const char *buf, size_t count)
 {
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm63_data *data = i2c_get_clientdata(client);
+	int nr = attr->index;
 	unsigned long val;
 	int err;
+	u8 reg;
 
 	if (!(data->config_fan & 0x20)) /* register is read-only */
 		return -EPERM;
@@ -309,11 +414,13 @@ static ssize_t set_pwm1(struct device *dev, struct device_attribute *dummy,
 	if (err)
 		return err;
 
+	reg = nr ? LM63_REG_LUT_PWM(nr - 1) : LM63_REG_PWM_VALUE;
 	val = SENSORS_LIMIT(val, 0, 255);
+
 	mutex_lock(&data->update_lock);
-	data->pwm1[0] = data->pwm_highres ? val :
+	data->pwm1[nr] = data->pwm_highres ? val :
 			(val * data->pwm1_freq * 2 + 127) / 255;
-	i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1[0]);
+	i2c_smbus_write_byte_data(client, reg, data->pwm1[nr]);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -325,6 +432,41 @@ static ssize_t show_pwm1_enable(struct device *dev,
 	return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2);
 }
 
+static ssize_t set_pwm1_enable(struct device *dev,
+			       struct device_attribute *dummy,
+			       const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm63_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+	if (val < 1 || val > 2)
+		return -EINVAL;
+
+	/*
+	 * Only let the user switch to automatic mode if the lookup table
+	 * looks sane.
+	 */
+	if (val == 2 && lm63_lut_looks_bad(client))
+		return -EPERM;
+
+	mutex_lock(&data->update_lock);
+	data->config_fan = i2c_smbus_read_byte_data(client,
+						    LM63_REG_CONFIG_FAN);
+	if (val == 1)
+		data->config_fan |= 0x20;
+	else
+		data->config_fan &= ~0x20;
+	i2c_smbus_write_byte_data(client, LM63_REG_CONFIG_FAN,
+	data->config_fan);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
 /*
  * There are 8bit registers for both local(temp1) and remote(temp2) sensor.
  * For remote sensor registers temp2_offset has to be considered,
@@ -367,23 +509,31 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm63_data *data = i2c_get_clientdata(client);
 	int nr = attr->index;
-	int reg = nr == 2 ? LM63_REG_REMOTE_TCRIT : LM63_REG_LOCAL_HIGH;
 	long val;
 	int err;
 	int temp;
+	u8 reg;
 
 	err = kstrtol(buf, 10, &val);
 	if (err)
 		return err;
 
 	mutex_lock(&data->update_lock);
-	if (nr == 2) {
+	switch (nr) {
+	case 2:
+		reg = LM63_REG_REMOTE_TCRIT;
 		if (data->remote_unsigned)
 			temp = TEMP8U_TO_REG(val - data->temp2_offset);
 		else
 			temp = TEMP8_TO_REG(val - data->temp2_offset);
-	} else {
+		break;
+	case 1:
+		reg = LM63_REG_LOCAL_HIGH;
 		temp = TEMP8_TO_REG(val);
+		break;
+	default:	/* lookup table */
+		reg = LM63_REG_LUT_TEMP(nr - 3);
+		temp = lut_temp_to_reg(data, val);
 	}
 	data->temp8[nr] = temp;
 	i2c_smbus_write_byte_data(client, reg, temp);
@@ -613,65 +763,78 @@ static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan,
 	set_fan, 1);
 
 static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 0);
-static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IRUGO, show_pwm1, NULL, 1);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp, S_IRUGO,
-	show_lut_temp, NULL, 3);
+static DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
+	show_pwm1_enable, set_pwm1_enable);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO,
+	show_pwm1, set_pwm1, 1);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp, S_IWUSR | S_IRUGO,
+	show_lut_temp, set_temp8, 3);
 static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp_hyst, S_IRUGO,
 	show_lut_temp_hyst, NULL, 3);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IRUGO, show_pwm1, NULL, 2);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp, S_IRUGO,
-	show_lut_temp, NULL, 4);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO,
+	show_pwm1, set_pwm1, 2);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp, S_IWUSR | S_IRUGO,
+	show_lut_temp, set_temp8, 4);
 static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp_hyst, S_IRUGO,
 	show_lut_temp_hyst, NULL, 4);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IRUGO, show_pwm1, NULL, 3);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point3_temp, S_IRUGO,
-	show_lut_temp, NULL, 5);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IWUSR | S_IRUGO,
+	show_pwm1, set_pwm1, 3);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point3_temp, S_IWUSR | S_IRUGO,
+	show_lut_temp, set_temp8, 5);
 static SENSOR_DEVICE_ATTR(pwm1_auto_point3_temp_hyst, S_IRUGO,
 	show_lut_temp_hyst, NULL, 5);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point4_pwm, S_IRUGO, show_pwm1, NULL, 4);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point4_temp, S_IRUGO,
-	show_lut_temp, NULL, 6);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point4_pwm, S_IWUSR | S_IRUGO,
+	show_pwm1, set_pwm1, 4);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point4_temp, S_IWUSR | S_IRUGO,
+	show_lut_temp, set_temp8, 6);
 static SENSOR_DEVICE_ATTR(pwm1_auto_point4_temp_hyst, S_IRUGO,
 	show_lut_temp_hyst, NULL, 6);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point5_pwm, S_IRUGO, show_pwm1, NULL, 5);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point5_temp, S_IRUGO,
-	show_lut_temp, NULL, 7);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point5_pwm, S_IWUSR | S_IRUGO,
+	show_pwm1, set_pwm1, 5);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point5_temp, S_IWUSR | S_IRUGO,
+	show_lut_temp, set_temp8, 7);
 static SENSOR_DEVICE_ATTR(pwm1_auto_point5_temp_hyst, S_IRUGO,
 	show_lut_temp_hyst, NULL, 7);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point6_pwm, S_IRUGO, show_pwm1, NULL, 6);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point6_temp, S_IRUGO,
-	show_lut_temp, NULL, 8);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point6_pwm, S_IWUSR | S_IRUGO,
+	show_pwm1, set_pwm1, 6);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point6_temp, S_IWUSR | S_IRUGO,
+	show_lut_temp, set_temp8, 8);
 static SENSOR_DEVICE_ATTR(pwm1_auto_point6_temp_hyst, S_IRUGO,
 	show_lut_temp_hyst, NULL, 8);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point7_pwm, S_IRUGO, show_pwm1, NULL, 7);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point7_temp, S_IRUGO,
-	show_lut_temp, NULL, 9);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point7_pwm, S_IWUSR | S_IRUGO,
+	show_pwm1, set_pwm1, 7);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point7_temp, S_IWUSR | S_IRUGO,
+	show_lut_temp, set_temp8, 9);
 static SENSOR_DEVICE_ATTR(pwm1_auto_point7_temp_hyst, S_IRUGO,
 	show_lut_temp_hyst, NULL, 9);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point8_pwm, S_IRUGO, show_pwm1, NULL, 8);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point8_temp, S_IRUGO,
-	show_lut_temp, NULL, 10);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point8_pwm, S_IWUSR | S_IRUGO,
+	show_pwm1, set_pwm1, 8);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point8_temp, S_IWUSR | S_IRUGO,
+	show_lut_temp, set_temp8, 10);
 static SENSOR_DEVICE_ATTR(pwm1_auto_point8_temp_hyst, S_IRUGO,
 	show_lut_temp_hyst, NULL, 10);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point9_pwm, S_IRUGO, show_pwm1, NULL, 9);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point9_temp, S_IRUGO,
-	show_lut_temp, NULL, 11);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point9_pwm, S_IWUSR | S_IRUGO,
+	show_pwm1, set_pwm1, 9);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point9_temp, S_IWUSR | S_IRUGO,
+	show_lut_temp, set_temp8, 11);
 static SENSOR_DEVICE_ATTR(pwm1_auto_point9_temp_hyst, S_IRUGO,
 	show_lut_temp_hyst, NULL, 11);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point10_pwm, S_IRUGO, show_pwm1, NULL, 10);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point10_temp, S_IRUGO,
-	show_lut_temp, NULL, 12);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point10_pwm, S_IWUSR | S_IRUGO,
+	show_pwm1, set_pwm1, 10);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point10_temp, S_IWUSR | S_IRUGO,
+	show_lut_temp, set_temp8, 12);
 static SENSOR_DEVICE_ATTR(pwm1_auto_point10_temp_hyst, S_IRUGO,
 	show_lut_temp_hyst, NULL, 12);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point11_pwm, S_IRUGO, show_pwm1, NULL, 11);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point11_temp, S_IRUGO,
-	show_lut_temp, NULL, 13);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point11_pwm, S_IWUSR | S_IRUGO,
+	show_pwm1, set_pwm1, 11);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point11_temp, S_IWUSR | S_IRUGO,
+	show_lut_temp, set_temp8, 13);
 static SENSOR_DEVICE_ATTR(pwm1_auto_point11_temp_hyst, S_IRUGO,
 	show_lut_temp_hyst, NULL, 13);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point12_pwm, S_IRUGO, show_pwm1, NULL, 12);
-static SENSOR_DEVICE_ATTR(pwm1_auto_point12_temp, S_IRUGO,
-	show_lut_temp, NULL, 14);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point12_pwm, S_IWUSR | S_IRUGO,
+	show_pwm1, set_pwm1, 12);
+static SENSOR_DEVICE_ATTR(pwm1_auto_point12_temp, S_IWUSR | S_IRUGO,
+	show_lut_temp, set_temp8, 14);
 static SENSOR_DEVICE_ATTR(pwm1_auto_point12_temp_hyst, S_IRUGO,
 	show_lut_temp_hyst, NULL, 14);
 
@@ -817,28 +980,25 @@ static const struct attribute_group lm63_group_fan1 = {
  */
 
 /* Return 0 if detection is successful, -ENODEV otherwise */
-static int lm63_detect(struct i2c_client *new_client,
+static int lm63_detect(struct i2c_client *client,
 		       struct i2c_board_info *info)
 {
-	struct i2c_adapter *adapter = new_client->adapter;
+	struct i2c_adapter *adapter = client->adapter;
 	u8 man_id, chip_id, reg_config1, reg_config2;
 	u8 reg_alert_status, reg_alert_mask;
-	int address = new_client->addr;
+	int address = client->addr;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	man_id = i2c_smbus_read_byte_data(new_client, LM63_REG_MAN_ID);
-	chip_id = i2c_smbus_read_byte_data(new_client, LM63_REG_CHIP_ID);
+	man_id = i2c_smbus_read_byte_data(client, LM63_REG_MAN_ID);
+	chip_id = i2c_smbus_read_byte_data(client, LM63_REG_CHIP_ID);
 
-	reg_config1 = i2c_smbus_read_byte_data(new_client,
-		      LM63_REG_CONFIG1);
-	reg_config2 = i2c_smbus_read_byte_data(new_client,
-		      LM63_REG_CONFIG2);
-	reg_alert_status = i2c_smbus_read_byte_data(new_client,
+	reg_config1 = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1);
+	reg_config2 = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG2);
+	reg_alert_status = i2c_smbus_read_byte_data(client,
 			   LM63_REG_ALERT_STATUS);
-	reg_alert_mask = i2c_smbus_read_byte_data(new_client,
-			 LM63_REG_ALERT_MASK);
+	reg_alert_mask = i2c_smbus_read_byte_data(client, LM63_REG_ALERT_MASK);
 
 	if (man_id != 0x01 /* National Semiconductor */
 	 || (reg_config1 & 0x18) != 0x00
@@ -863,74 +1023,6 @@ static int lm63_detect(struct i2c_client *new_client,
 	return 0;
 }
 
-static int lm63_probe(struct i2c_client *new_client,
-		      const struct i2c_device_id *id)
-{
-	struct lm63_data *data;
-	int err;
-
-	data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	i2c_set_clientdata(new_client, data);
-	data->valid = 0;
-	mutex_init(&data->update_lock);
-
-	/* Set the device type */
-	data->kind = id->driver_data;
-	if (data->kind == lm64)
-		data->temp2_offset = 16000;
-
-	/* Initialize chip */
-	lm63_init_client(new_client);
-
-	/* Register sysfs hooks */
-	err = sysfs_create_group(&new_client->dev.kobj, &lm63_group);
-	if (err)
-		goto exit_free;
-	if (data->config & 0x04) { /* tachometer enabled */
-		err = sysfs_create_group(&new_client->dev.kobj,
-					 &lm63_group_fan1);
-		if (err)
-			goto exit_remove_files;
-	}
-	if (data->kind == lm96163) {
-		err = device_create_file(&new_client->dev,
-					 &dev_attr_temp2_type);
-		if (err)
-			goto exit_remove_files;
-
-		err = sysfs_create_group(&new_client->dev.kobj,
-					 &lm63_group_extra_lut);
-		if (err)
-			goto exit_remove_files;
-	}
-
-	data->hwmon_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove_files;
-	}
-
-	return 0;
-
-exit_remove_files:
-	sysfs_remove_group(&new_client->dev.kobj, &lm63_group);
-	sysfs_remove_group(&new_client->dev.kobj, &lm63_group_fan1);
-	if (data->kind == lm96163) {
-		device_remove_file(&new_client->dev, &dev_attr_temp2_type);
-		sysfs_remove_group(&new_client->dev.kobj,
-				   &lm63_group_extra_lut);
-	}
-exit_free:
-	kfree(data);
-exit:
-	return err;
-}
-
 /*
  * Ideally we shouldn't have to initialize anything, since the BIOS
  * should have taken care of everything
@@ -1010,114 +1102,110 @@ static void lm63_init_client(struct i2c_client *client)
 		(data->config_fan & 0x20) ? "manual" : "auto");
 }
 
-static int lm63_remove(struct i2c_client *client)
+static int lm63_probe(struct i2c_client *client,
+		      const struct i2c_device_id *id)
 {
-	struct lm63_data *data = i2c_get_clientdata(client);
+	struct lm63_data *data;
+	int err;
 
-	hwmon_device_unregister(data->hwmon_dev);
+	data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	data->valid = 0;
+	mutex_init(&data->update_lock);
+
+	/* Set the device type */
+	data->kind = id->driver_data;
+	if (data->kind == lm64)
+		data->temp2_offset = 16000;
+
+	/* Initialize chip */
+	lm63_init_client(client);
+
+	/* Register sysfs hooks */
+	err = sysfs_create_group(&client->dev.kobj, &lm63_group);
+	if (err)
+		goto exit_free;
+	if (data->config & 0x04) { /* tachometer enabled */
+		err = sysfs_create_group(&client->dev.kobj, &lm63_group_fan1);
+		if (err)
+			goto exit_remove_files;
+	}
+	if (data->kind == lm96163) {
+		err = device_create_file(&client->dev, &dev_attr_temp2_type);
+		if (err)
+			goto exit_remove_files;
+
+		err = sysfs_create_group(&client->dev.kobj,
+					 &lm63_group_extra_lut);
+		if (err)
+			goto exit_remove_files;
+	}
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove_files;
+	}
+
+	return 0;
+
+exit_remove_files:
 	sysfs_remove_group(&client->dev.kobj, &lm63_group);
 	sysfs_remove_group(&client->dev.kobj, &lm63_group_fan1);
 	if (data->kind == lm96163) {
 		device_remove_file(&client->dev, &dev_attr_temp2_type);
 		sysfs_remove_group(&client->dev.kobj, &lm63_group_extra_lut);
 	}
-
+exit_free:
 	kfree(data);
-	return 0;
+exit:
+	return err;
 }
 
-static struct lm63_data *lm63_update_device(struct device *dev)
+static int lm63_remove(struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(dev);
 	struct lm63_data *data = i2c_get_clientdata(client);
-	unsigned long next_update;
-	int i;
-
-	mutex_lock(&data->update_lock);
-
-	next_update = data->last_updated
-	  + msecs_to_jiffies(data->update_interval) + 1;
-
-	if (time_after(jiffies, next_update) || !data->valid) {
-		if (data->config & 0x04) { /* tachometer enabled  */
-			/* order matters for fan1_input */
-			data->fan[0] = i2c_smbus_read_byte_data(client,
-				       LM63_REG_TACH_COUNT_LSB) & 0xFC;
-			data->fan[0] |= i2c_smbus_read_byte_data(client,
-					LM63_REG_TACH_COUNT_MSB) << 8;
-			data->fan[1] = (i2c_smbus_read_byte_data(client,
-					LM63_REG_TACH_LIMIT_LSB) & 0xFC)
-				     | (i2c_smbus_read_byte_data(client,
-					LM63_REG_TACH_LIMIT_MSB) << 8);
-		}
-
-		data->pwm1_freq = i2c_smbus_read_byte_data(client,
-				  LM63_REG_PWM_FREQ);
-		if (data->pwm1_freq == 0)
-			data->pwm1_freq = 1;
-		data->pwm1[0] = i2c_smbus_read_byte_data(client,
-				LM63_REG_PWM_VALUE);
-
-		data->temp8[0] = i2c_smbus_read_byte_data(client,
-				 LM63_REG_LOCAL_TEMP);
-		data->temp8[1] = i2c_smbus_read_byte_data(client,
-				 LM63_REG_LOCAL_HIGH);
-
-		/* order matters for temp2_input */
-		data->temp11[0] = i2c_smbus_read_byte_data(client,
-				  LM63_REG_REMOTE_TEMP_MSB) << 8;
-		data->temp11[0] |= i2c_smbus_read_byte_data(client,
-				   LM63_REG_REMOTE_TEMP_LSB);
-		data->temp11[1] = (i2c_smbus_read_byte_data(client,
-				  LM63_REG_REMOTE_LOW_MSB) << 8)
-				| i2c_smbus_read_byte_data(client,
-				  LM63_REG_REMOTE_LOW_LSB);
-		data->temp11[2] = (i2c_smbus_read_byte_data(client,
-				  LM63_REG_REMOTE_HIGH_MSB) << 8)
-				| i2c_smbus_read_byte_data(client,
-				  LM63_REG_REMOTE_HIGH_LSB);
-		data->temp11[3] = (i2c_smbus_read_byte_data(client,
-				  LM63_REG_REMOTE_OFFSET_MSB) << 8)
-				| i2c_smbus_read_byte_data(client,
-				  LM63_REG_REMOTE_OFFSET_LSB);
-
-		if (data->kind == lm96163)
-			data->temp11u = (i2c_smbus_read_byte_data(client,
-					LM96163_REG_REMOTE_TEMP_U_MSB) << 8)
-				      | i2c_smbus_read_byte_data(client,
-					LM96163_REG_REMOTE_TEMP_U_LSB);
-
-		data->temp8[2] = i2c_smbus_read_byte_data(client,
-				 LM63_REG_REMOTE_TCRIT);
-		data->temp2_crit_hyst = i2c_smbus_read_byte_data(client,
-					LM63_REG_REMOTE_TCRIT_HYST);
-
-		data->alarms = i2c_smbus_read_byte_data(client,
-			       LM63_REG_ALERT_STATUS) & 0x7F;
 
-		data->last_updated = jiffies;
-		data->valid = 1;
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &lm63_group);
+	sysfs_remove_group(&client->dev.kobj, &lm63_group_fan1);
+	if (data->kind == lm96163) {
+		device_remove_file(&client->dev, &dev_attr_temp2_type);
+		sysfs_remove_group(&client->dev.kobj, &lm63_group_extra_lut);
 	}
 
-	if (time_after(jiffies, data->lut_last_updated + 5 * HZ) ||
-	    !data->lut_valid) {
-		for (i = 0; i < data->lut_size; i++) {
-			data->pwm1[1 + i] = i2c_smbus_read_byte_data(client,
-					    LM63_REG_LUT_PWM(i));
-			data->temp8[3 + i] = i2c_smbus_read_byte_data(client,
-					     LM63_REG_LUT_TEMP(i));
-		}
-		data->lut_temp_hyst = i2c_smbus_read_byte_data(client,
-				      LM63_REG_LUT_TEMP_HYST);
+	kfree(data);
+	return 0;
+}
 
-		data->lut_last_updated = jiffies;
-		data->lut_valid = 1;
-	}
+/*
+ * Driver data (common to all clients)
+ */
 
-	mutex_unlock(&data->update_lock);
+static const struct i2c_device_id lm63_id[] = {
+	{ "lm63", lm63 },
+	{ "lm64", lm64 },
+	{ "lm96163", lm96163 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm63_id);
 
-	return data;
-}
+static struct i2c_driver lm63_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "lm63",
+	},
+	.probe		= lm63_probe,
+	.remove		= lm63_remove,
+	.id_table	= lm63_id,
+	.detect		= lm63_detect,
+	.address_list	= normal_i2c,
+};
 
 module_i2c_driver(lm63_driver);
 
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 248f2b40dfafd3..22b14a68e35e76 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -57,6 +57,9 @@
  * This driver also supports the SA56004 from Philips. This device is
  * pin-compatible with the LM86, the ED/EDP parts are also address-compatible.
  *
+ * This driver also supports the G781 from GMT. This device is compatible
+ * with the ADM1032.
+ *
  * Since the LM90 was the first chipset supported by this driver, most
  * comments will refer to this chipset, but are actually general and
  * concern all supported chipsets, unless mentioned otherwise.
@@ -107,7 +110,7 @@ static const unsigned short normal_i2c[] = {
 	0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
 
 enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
-	max6646, w83l771, max6696, sa56004 };
+	max6646, w83l771, max6696, sa56004, g781 };
 
 /*
  * The LM90 registers
@@ -184,6 +187,7 @@ static const struct i2c_device_id lm90_id[] = {
 	{ "adm1032", adm1032 },
 	{ "adt7461", adt7461 },
 	{ "adt7461a", adt7461 },
+	{ "g781", g781 },
 	{ "lm90", lm90 },
 	{ "lm86", lm86 },
 	{ "lm89", lm86 },
@@ -229,6 +233,12 @@ static const struct lm90_params lm90_params[] = {
 		.alert_alarms = 0x7c,
 		.max_convrate = 10,
 	},
+	[g781] = {
+		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
+		  | LM90_HAVE_BROKEN_ALERT,
+		.alert_alarms = 0x7c,
+		.max_convrate = 8,
+	},
 	[lm86] = {
 		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
 		.alert_alarms = 0x7b,
@@ -308,22 +318,24 @@ struct lm90_data {
 
 	/* registers values */
 	s8 temp8[8];	/* 0: local low limit
-			   1: local high limit
-			   2: local critical limit
-			   3: remote critical limit
-			   4: local emergency limit (max6659 and max6695/96)
-			   5: remote emergency limit (max6659 and max6695/96)
-			   6: remote 2 critical limit (max6695/96 only)
-			   7: remote 2 emergency limit (max6695/96 only) */
+			 * 1: local high limit
+			 * 2: local critical limit
+			 * 3: remote critical limit
+			 * 4: local emergency limit (max6659 and max6695/96)
+			 * 5: remote emergency limit (max6659 and max6695/96)
+			 * 6: remote 2 critical limit (max6695/96 only)
+			 * 7: remote 2 emergency limit (max6695/96 only)
+			 */
 	s16 temp11[8];	/* 0: remote input
-			   1: remote low limit
-			   2: remote high limit
-			   3: remote offset (except max6646, max6657/58/59,
-					     and max6695/96)
-			   4: local input
-			   5: remote 2 input (max6695/96 only)
-			   6: remote 2 low limit (max6695/96 only)
-			   7: remote 2 high limit (ma6695/96 only) */
+			 * 1: remote low limit
+			 * 2: remote high limit
+			 * 3: remote offset (except max6646, max6657/58/59,
+			 *		     and max6695/96)
+			 * 4: local input
+			 * 5: remote 2 input (max6695/96 only)
+			 * 6: remote 2 low limit (max6695/96 only)
+			 * 7: remote 2 high limit (max6695/96 only)
+			 */
 	u8 temp_hyst;
 	u16 alarms; /* bitvector (upper 8 bits for max6695/96) */
 };
@@ -533,8 +545,10 @@ static struct lm90_data *lm90_update_device(struct device *dev)
 				data->alarms |= alarms << 8;
 		}
 
-		/* Re-enable ALERT# output if it was originally enabled and
-		 * relevant alarms are all clear */
+		/*
+		 * Re-enable ALERT# output if it was originally enabled and
+		 * relevant alarms are all clear
+		 */
 		if ((data->config_orig & 0x80) == 0
 		 && (data->alarms & data->alert_alarms) == 0) {
 			u8 config;
@@ -1162,8 +1176,10 @@ static int lm90_detect(struct i2c_client *client,
 		 && (config1 & 0x3F) == 0x00
 		 && convrate <= 0x0A) {
 			name = "adm1032";
-			/* The ADM1032 supports PEC, but only if combined
-			   transactions are not used. */
+			/*
+			 * The ADM1032 supports PEC, but only if combined
+			 * transactions are not used.
+			 */
 			if (i2c_check_functionality(adapter,
 						    I2C_FUNC_SMBUS_BYTE))
 				info->flags |= I2C_CLIENT_PEC;
@@ -1283,6 +1299,13 @@ static int lm90_detect(struct i2c_client *client,
 		 && convrate <= 0x09) {
 			name = "sa56004";
 		}
+	} else
+	if ((address == 0x4C || address == 0x4D)
+	 && man_id == 0x47) { /* GMT */
+		if (chip_id == 0x01 /* G781 */
+		 && (config1 & 0x3F) == 0x00
+		 && convrate <= 0x08)
+			name = "g781";
 	}
 
 	if (!name) { /* identification failed */
@@ -1313,6 +1336,15 @@ static void lm90_remove_files(struct i2c_client *client, struct lm90_data *data)
 	sysfs_remove_group(&dev->kobj, &lm90_group);
 }
 
+static void lm90_restore_conf(struct i2c_client *client, struct lm90_data *data)
+{
+	/* Restore initial configuration */
+	i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE,
+				  data->convrate_orig);
+	i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
+				  data->config_orig);
+}
+
 static void lm90_init_client(struct i2c_client *client)
 {
 	u8 config, convrate;
@@ -1382,8 +1414,10 @@ static int lm90_probe(struct i2c_client *client,
 			client->flags &= ~I2C_CLIENT_PEC;
 	}
 
-	/* Different devices have different alarm bits triggering the
-	 * ALERT# output */
+	/*
+	 * Different devices have different alarm bits triggering the
+	 * ALERT# output
+	 */
 	data->alert_alarms = lm90_params[data->kind].alert_alarms;
 
 	/* Set chip capabilities */
@@ -1399,7 +1433,7 @@ static int lm90_probe(struct i2c_client *client,
 	/* Register sysfs hooks */
 	err = sysfs_create_group(&dev->kobj, &lm90_group);
 	if (err)
-		goto exit_free;
+		goto exit_restore;
 	if (client->flags & I2C_CLIENT_PEC) {
 		err = device_create_file(dev, &dev_attr_pec);
 		if (err)
@@ -1438,7 +1472,8 @@ static int lm90_probe(struct i2c_client *client,
 
 exit_remove_files:
 	lm90_remove_files(client, data);
-exit_free:
+exit_restore:
+	lm90_restore_conf(client, data);
 	kfree(data);
 exit:
 	return err;
@@ -1450,12 +1485,7 @@ static int lm90_remove(struct i2c_client *client)
 
 	hwmon_device_unregister(data->hwmon_dev);
 	lm90_remove_files(client, data);
-
-	/* Restore initial configuration */
-	i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE,
-				  data->convrate_orig);
-	i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
-				  data->config_orig);
+	lm90_restore_conf(client, data);
 
 	kfree(data);
 	return 0;
@@ -1488,9 +1518,11 @@ static void lm90_alert(struct i2c_client *client, unsigned int flag)
 			dev_warn(&client->dev,
 				 "temp%d out of range, please check!\n", 3);
 
-		/* Disable ALERT# output, because these chips don't implement
-		  SMBus alert correctly; they should only hold the alert line
-		  low briefly. */
+		/*
+		 * Disable ALERT# output, because these chips don't implement
+		 * SMBus alert correctly; they should only hold the alert line
+		 * low briefly.
+		 */
 		if ((data->flags & LM90_HAVE_BROKEN_ALERT)
 		 && (alarms & data->alert_alarms)) {
 			dev_dbg(&client->dev, "Disabling ALERT#\n");
diff --git a/drivers/hwmon/mc13783-adc.c b/drivers/hwmon/mc13783-adc.c
index ef65ab56b0948a..6c6b240a782eeb 100644
--- a/drivers/hwmon/mc13783-adc.c
+++ b/drivers/hwmon/mc13783-adc.c
@@ -1,5 +1,5 @@
 /*
- * Driver for the Freescale Semiconductor MC13783 adc.
+ * Driver for the ADC on Freescale Semiconductor MC13783 and MC13892 PMICs.
  *
  * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright (C) 2009 Sascha Hauer, Pengutronix
@@ -18,7 +18,7 @@
  * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */
 
-#include <linux/mfd/mc13783.h>
+#include <linux/mfd/mc13xxx.h>
 #include <linux/platform_device.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/kernel.h>
@@ -28,24 +28,30 @@
 #include <linux/init.h>
 #include <linux/err.h>
 
-#define MC13783_ADC_NAME	"mc13783-adc"
+#define DRIVER_NAME	"mc13783-adc"
+
+/* platform device id driver data */
+#define MC13783_ADC_16CHANS	1
+#define MC13783_ADC_BPDIV2	2
 
 struct mc13783_adc_priv {
 	struct mc13xxx *mc13xxx;
 	struct device *hwmon_dev;
+	char name[10];
 };
 
 static ssize_t mc13783_adc_show_name(struct device *dev, struct device_attribute
 			      *devattr, char *buf)
 {
-	return sprintf(buf, "mc13783_adc\n");
+	struct mc13783_adc_priv *priv = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", priv->name);
 }
 
 static int mc13783_adc_read(struct device *dev,
 		struct device_attribute *devattr, unsigned int *val)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
+	struct mc13783_adc_priv *priv = dev_get_drvdata(dev);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	unsigned int channel = attr->index;
 	unsigned int sample[4];
@@ -68,16 +74,21 @@ static ssize_t mc13783_adc_read_bp(struct device *dev,
 		struct device_attribute *devattr, char *buf)
 {
 	unsigned val;
+	struct platform_device *pdev = to_platform_device(dev);
+	kernel_ulong_t driver_data = platform_get_device_id(pdev)->driver_data;
 	int ret = mc13783_adc_read(dev, devattr, &val);
 
 	if (ret)
 		return ret;
 
-	/*
-	 * BP (channel 2) reports with offset 2.4V to the actual value to fit
-	 * the input range of the ADC.  unit = 2.25mV = 9/4 mV.
-	 */
-	val = DIV_ROUND_CLOSEST(val * 9, 4) + 2400;
+	if (driver_data & MC13783_ADC_BPDIV2)
+		val = DIV_ROUND_CLOSEST(val * 9, 2);
+	else
+		/*
+		 * BP (channel 2) reports with offset 2.4V to the actual value
+		 * to fit the input range of the ADC.  unit = 2.25mV = 9/4 mV.
+		 */
+		val = DIV_ROUND_CLOSEST(val * 9, 4) + 2400;
 
 	return sprintf(buf, "%u\n", val);
 }
@@ -114,12 +125,21 @@ static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, mc13783_adc_read_gp, NULL, 13);
 static SENSOR_DEVICE_ATTR(in14_input, S_IRUGO, mc13783_adc_read_gp, NULL, 14);
 static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, mc13783_adc_read_gp, NULL, 15);
 
-static struct attribute *mc13783_attr[] = {
+static struct attribute *mc13783_attr_base[] = {
 	&dev_attr_name.attr,
 	&sensor_dev_attr_in2_input.dev_attr.attr,
 	&sensor_dev_attr_in5_input.dev_attr.attr,
 	&sensor_dev_attr_in6_input.dev_attr.attr,
 	&sensor_dev_attr_in7_input.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group mc13783_group_base = {
+	.attrs = mc13783_attr_base,
+};
+
+/* these are only used if MC13783_ADC_16CHANS is provided in driver data */
+static struct attribute *mc13783_attr_16chans[] = {
 	&sensor_dev_attr_in8_input.dev_attr.attr,
 	&sensor_dev_attr_in9_input.dev_attr.attr,
 	&sensor_dev_attr_in10_input.dev_attr.attr,
@@ -127,8 +147,8 @@ static struct attribute *mc13783_attr[] = {
 	NULL
 };
 
-static const struct attribute_group mc13783_group = {
-	.attrs = mc13783_attr,
+static const struct attribute_group mc13783_group_16chans = {
+	.attrs = mc13783_attr_16chans,
 };
 
 /* last four channels may be occupied by the touchscreen */
@@ -156,24 +176,37 @@ static int __init mc13783_adc_probe(struct platform_device *pdev)
 {
 	struct mc13783_adc_priv *priv;
 	int ret;
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	char *dash;
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
 	priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
+	snprintf(priv->name, ARRAY_SIZE(priv->name), "%s", id->name);
+	dash = strchr(priv->name, '-');
+	if (dash)
+		*dash = '\0';
 
 	platform_set_drvdata(pdev, priv);
 
 	/* Register sysfs hooks */
-	ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group);
+	ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group_base);
 	if (ret)
-		goto out_err_create1;
+		goto out_err_create_base;
+
+	if (id->driver_data & MC13783_ADC_16CHANS) {
+		ret = sysfs_create_group(&pdev->dev.kobj,
+				&mc13783_group_16chans);
+		if (ret)
+			goto out_err_create_16chans;
+	}
 
 	if (!mc13783_adc_use_touchscreen(pdev)) {
 		ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group_ts);
 		if (ret)
-			goto out_err_create2;
+			goto out_err_create_ts;
 	}
 
 	priv->hwmon_dev = hwmon_device_register(&pdev->dev);
@@ -184,17 +217,20 @@ static int __init mc13783_adc_probe(struct platform_device *pdev)
 		goto out_err_register;
 	}
 
-
 	return 0;
 
 out_err_register:
 
 	if (!mc13783_adc_use_touchscreen(pdev))
 		sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
-out_err_create2:
+out_err_create_ts:
 
-	sysfs_remove_group(&pdev->dev.kobj, &mc13783_group);
-out_err_create1:
+	if (id->driver_data & MC13783_ADC_16CHANS)
+		sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_16chans);
+out_err_create_16chans:
+
+	sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_base);
+out_err_create_base:
 
 	platform_set_drvdata(pdev, NULL);
 	kfree(priv);
@@ -205,13 +241,17 @@ out_err_create1:
 static int __devexit mc13783_adc_remove(struct platform_device *pdev)
 {
 	struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
+	kernel_ulong_t driver_data = platform_get_device_id(pdev)->driver_data;
 
 	hwmon_device_unregister(priv->hwmon_dev);
 
 	if (!mc13783_adc_use_touchscreen(pdev))
 		sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
 
-	sysfs_remove_group(&pdev->dev.kobj, &mc13783_group);
+	if (driver_data & MC13783_ADC_16CHANS)
+		sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_16chans);
+
+	sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_base);
 
 	platform_set_drvdata(pdev, NULL);
 	kfree(priv);
@@ -219,12 +259,26 @@ static int __devexit mc13783_adc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct platform_device_id mc13783_adc_idtable[] = {
+	{
+		.name = "mc13783-adc",
+		.driver_data = MC13783_ADC_16CHANS,
+	}, {
+		.name = "mc13892-adc",
+		.driver_data = MC13783_ADC_BPDIV2,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, mc13783_adc_idtable);
+
 static struct platform_driver mc13783_adc_driver = {
-	.remove 	= __devexit_p(mc13783_adc_remove),
+	.remove		= __devexit_p(mc13783_adc_remove),
 	.driver		= {
 		.owner	= THIS_MODULE,
-		.name	= MC13783_ADC_NAME,
+		.name	= DRIVER_NAME,
 	},
+	.id_table	= mc13783_adc_idtable,
 };
 
 static int __init mc13783_adc_init(void)
@@ -243,4 +297,3 @@ module_exit(mc13783_adc_exit);
 MODULE_DESCRIPTION("MC13783 ADC driver");
 MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" MC13783_ADC_NAME);
diff --git a/drivers/hwmon/mcp3021.c b/drivers/hwmon/mcp3021.c
new file mode 100644
index 00000000000000..d0afc0cd3ff49a
--- /dev/null
+++ b/drivers/hwmon/mcp3021.c
@@ -0,0 +1,171 @@
+/*
+ * mcp3021.c - driver for the Microchip MCP3021 chip
+ *
+ * Copyright (C) 2008-2009, 2012 Freescale Semiconductor, Inc.
+ * Author: Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This driver export the value of analog input voltage to sysfs, the
+ * voltage unit is mV. Through the sysfs interface, lm-sensors tool
+ * can also display the input voltage.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/device.h>
+
+/* Vdd info */
+#define MCP3021_VDD_MAX		5500
+#define MCP3021_VDD_MIN		2700
+#define MCP3021_VDD_REF		3300
+
+/* output format */
+#define MCP3021_SAR_SHIFT	2
+#define MCP3021_SAR_MASK	0x3ff
+
+#define MCP3021_OUTPUT_RES	10	/* 10-bit resolution */
+#define MCP3021_OUTPUT_SCALE	4
+
+/*
+ * Client data (each client gets its own)
+ */
+struct mcp3021_data {
+	struct device *hwmon_dev;
+	u32 vdd;	/* device power supply */
+};
+
+static int mcp3021_read16(struct i2c_client *client)
+{
+	int ret;
+	u16 reg;
+	__be16 buf;
+
+	ret = i2c_master_recv(client, (char *)&buf, 2);
+	if (ret < 0)
+		return ret;
+	if (ret != 2)
+		return -EIO;
+
+	/* The output code of the MCP3021 is transmitted with MSB first. */
+	reg = be16_to_cpu(buf);
+
+	/*
+	 * The ten-bit output code is composed of the lower 4-bit of the
+	 * first byte and the upper 6-bit of the second byte.
+	 */
+	reg = (reg >> MCP3021_SAR_SHIFT) & MCP3021_SAR_MASK;
+
+	return reg;
+}
+
+static inline u16 volts_from_reg(u16 vdd, u16 val)
+{
+	if (val == 0)
+		return 0;
+
+	val = val * MCP3021_OUTPUT_SCALE - MCP3021_OUTPUT_SCALE / 2;
+
+	return val * DIV_ROUND_CLOSEST(vdd,
+			(1 << MCP3021_OUTPUT_RES) * MCP3021_OUTPUT_SCALE);
+}
+
+static ssize_t show_in_input(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mcp3021_data *data = i2c_get_clientdata(client);
+	int reg, in_input;
+
+	reg = mcp3021_read16(client);
+	if (reg < 0)
+		return reg;
+
+	in_input = volts_from_reg(data->vdd, reg);
+	return sprintf(buf, "%d\n", in_input);
+}
+
+static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input, NULL);
+
+static int mcp3021_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	int err;
+	struct mcp3021_data *data = NULL;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	data = kzalloc(sizeof(struct mcp3021_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+
+	if (client->dev.platform_data) {
+		data->vdd = *(u32 *)client->dev.platform_data;
+		if (data->vdd > MCP3021_VDD_MAX ||
+				data->vdd < MCP3021_VDD_MIN) {
+			err = -EINVAL;
+			goto exit_free;
+		}
+	} else
+		data->vdd = MCP3021_VDD_REF;
+
+	err = sysfs_create_file(&client->dev.kobj, &dev_attr_in0_input.attr);
+	if (err)
+		goto exit_free;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove;
+	}
+
+	return 0;
+
+exit_remove:
+	sysfs_remove_file(&client->dev.kobj, &dev_attr_in0_input.attr);
+exit_free:
+	kfree(data);
+	return err;
+}
+
+static int mcp3021_remove(struct i2c_client *client)
+{
+	struct mcp3021_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_file(&client->dev.kobj, &dev_attr_in0_input.attr);
+	kfree(data);
+
+	return 0;
+}
+
+static const struct i2c_device_id mcp3021_id[] = {
+	{ "mcp3021", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mcp3021_id);
+
+static struct i2c_driver mcp3021_driver = {
+	.driver = {
+		.name = "mcp3021",
+	},
+	.probe = mcp3021_probe,
+	.remove = mcp3021_remove,
+	.id_table = mcp3021_id,
+};
+
+module_i2c_driver(mcp3021_driver);
+
+MODULE_AUTHOR("Mingkai Hu <Mingkai.hu@freescale.com>");
+MODULE_DESCRIPTION("Microchip MCP3021 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index deb12c982800e5..d887cb3b72e8a3 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -72,8 +72,10 @@ MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
 #define TEMP_CRIT_HYST			2
 #define TEMP_WARN			3
 #define TEMP_WARN_HYST			4
-/* only crit and crit_hyst affect real-time alarm status
- * current crit crit_hyst warn warn_hyst */
+/*
+ * only crit and crit_hyst affect real-time alarm status
+ * current crit crit_hyst warn warn_hyst
+ */
 static const u16 W83795_REG_TEMP[][5] = {
 	{0x21, 0x96, 0x97, 0x98, 0x99},	/* TD1/TR1 */
 	{0x22, 0x9a, 0x9b, 0x9c, 0x9d},	/* TD2/TR2 */
@@ -354,26 +356,34 @@ struct w83795_data {
 	u8 temp_mode;		/* Bit vector, 0 = TR, 1 = TD */
 	u8 temp_src[3];		/* Register value */
 
-	u8 enable_dts;		/* Enable PECI and SB-TSI,
+	u8 enable_dts;		/*
+				 * Enable PECI and SB-TSI,
 				 * bit 0: =1 enable, =0 disable,
-				 * bit 1: =1 AMD SB-TSI, =0 Intel PECI */
+				 * bit 1: =1 AMD SB-TSI, =0 Intel PECI
+				 */
 	u8 has_dts;		/* Enable monitor DTS temp */
 	s8 dts[8];		/* Register value */
 	u8 dts_read_vrlsb[8];	/* Register value */
 	s8 dts_ext[4];		/* Register value */
 
-	u8 has_pwm;		/* 795g supports 8 pwm, 795adg only supports 2,
+	u8 has_pwm;		/*
+				 * 795g supports 8 pwm, 795adg only supports 2,
 				 * no config register, only affected by chip
-				 * type */
-	u8 pwm[8][5];		/* Register value, output, freq, start,
-				 *  non stop, stop time */
+				 * type
+				 */
+	u8 pwm[8][5];		/*
+				 * Register value, output, freq, start,
+				 *  non stop, stop time
+				 */
 	u16 clkin;		/* CLKIN frequency in kHz */
 	u8 pwm_fcms[2];		/* Register value */
 	u8 pwm_tfmr[6];		/* Register value */
 	u8 pwm_fomc;		/* Register value */
 
-	u16 target_speed[8];	/* Register value, target speed for speed
-				 * cruise */
+	u16 target_speed[8];	/*
+				 * Register value, target speed for speed
+				 * cruise
+				 */
 	u8 tol_speed;		/* tolerance of target speed */
 	u8 pwm_temp[6][4];	/* TTTI, CTFS, HCT, HOT */
 	u8 sf4_reg[6][2][7];	/* 6 temp, temp/dcpwm, 7 registers */
@@ -482,8 +492,10 @@ static void w83795_update_limits(struct i2c_client *client)
 	/* Read the fan limits */
 	lsb = 0; /* Silent false gcc warning */
 	for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
-		/* Each register contains LSB for 2 fans, but we want to
-		 * read it only once to save time */
+		/*
+		 * Each register contains LSB for 2 fans, but we want to
+		 * read it only once to save time
+		 */
 		if ((i & 1) == 0 && (data->has_fan & (3 << i)))
 			lsb = w83795_read(client, W83795_REG_FAN_MIN_LSB(i));
 
@@ -665,9 +677,11 @@ static struct w83795_data *w83795_update_device(struct device *dev)
 		    w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT));
 	}
 
-	/* Update intrusion and alarms
+	/*
+	 * Update intrusion and alarms
 	 * It is important to read intrusion first, because reading from
-	 * register SMI STS6 clears the interrupt status temporarily. */
+	 * register SMI STS6 clears the interrupt status temporarily.
+	 */
 	tmp = w83795_read(client, W83795_REG_ALARM_CTRL);
 	/* Switch to interrupt status for intrusion if needed */
 	if (tmp & ALARM_CTRL_RTSACS)
@@ -929,6 +943,14 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
 	if (val < 1 || val > 2)
 		return -EINVAL;
 
+#ifndef CONFIG_SENSORS_W83795_FANCTRL
+	if (val > 1) {
+		dev_warn(dev, "Automatic fan speed control support disabled\n");
+		dev_warn(dev, "Build with CONFIG_SENSORS_W83795_FANCTRL=y if you want it\n");
+		return -EOPNOTSUPP;
+	}
+#endif
+
 	mutex_lock(&data->update_lock);
 	switch (val) {
 	case 1:
@@ -1595,8 +1617,10 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 
 #define NOT_USED			-1
 
-/* Don't change the attribute order, _max, _min and _beep are accessed by index
- * somewhere else in the code */
+/*
+ * Don't change the attribute order, _max, _min and _beep are accessed by index
+ * somewhere else in the code
+ */
 #define SENSOR_ATTR_IN(index) {						\
 	SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL,	\
 		IN_READ, index), \
@@ -1610,8 +1634,10 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 		show_alarm_beep, store_beep, BEEP_ENABLE,		\
 		index + ((index > 14) ? 1 : 0)) }
 
-/* Don't change the attribute order, _beep is accessed by index
- * somewhere else in the code */
+/*
+ * Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code
+ */
 #define SENSOR_ATTR_FAN(index) {					\
 	SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan,		\
 		NULL, FAN_INPUT, index - 1), \
@@ -1625,23 +1651,25 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 #define SENSOR_ATTR_PWM(index) {					\
 	SENSOR_ATTR_2(pwm##index, S_IWUSR | S_IRUGO, show_pwm,		\
 		store_pwm, PWM_OUTPUT, index - 1),			\
+	SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO,		\
+		show_pwm_enable, store_pwm_enable, NOT_USED, index - 1), \
+	SENSOR_ATTR_2(pwm##index##_mode, S_IRUGO,			\
+		show_pwm_mode, NULL, NOT_USED, index - 1),		\
+	SENSOR_ATTR_2(pwm##index##_freq, S_IWUSR | S_IRUGO,		\
+		show_pwm, store_pwm, PWM_FREQ, index - 1),		\
 	SENSOR_ATTR_2(pwm##index##_nonstop, S_IWUSR | S_IRUGO,		\
 		show_pwm, store_pwm, PWM_NONSTOP, index - 1),		\
 	SENSOR_ATTR_2(pwm##index##_start, S_IWUSR | S_IRUGO,		\
 		show_pwm, store_pwm, PWM_START, index - 1),		\
 	SENSOR_ATTR_2(pwm##index##_stop_time, S_IWUSR | S_IRUGO,	\
 		show_pwm, store_pwm, PWM_STOP_TIME, index - 1),	 \
-	SENSOR_ATTR_2(pwm##index##_freq, S_IWUSR | S_IRUGO,	\
-		show_pwm, store_pwm, PWM_FREQ, index - 1),	 \
-	SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO,		\
-		show_pwm_enable, store_pwm_enable, NOT_USED, index - 1), \
-	SENSOR_ATTR_2(pwm##index##_mode, S_IRUGO,			\
-		show_pwm_mode, NULL, NOT_USED, index - 1),		\
 	SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \
 		show_fanin, store_fanin, FANIN_TARGET, index - 1) }
 
-/* Don't change the attribute order, _beep is accessed by index
- * somewhere else in the code */
+/*
+ * Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code
+ */
 #define SENSOR_ATTR_DTS(index) {					\
 	SENSOR_ATTR_2(temp##index##_type, S_IRUGO ,		\
 		show_dts_mode, NULL, NOT_USED, index - 7),	\
@@ -1660,8 +1688,10 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
 		show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) }
 
-/* Don't change the attribute order, _beep is accessed by index
- * somewhere else in the code */
+/*
+ * Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code
+ */
 #define SENSOR_ATTR_TEMP(index) {					\
 	SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \
 		show_temp_mode, store_temp_mode, NOT_USED, index - 1),	\
@@ -1867,8 +1897,10 @@ static int w83795_get_device_id(struct i2c_client *client)
 
 	device_id = i2c_smbus_read_byte_data(client, W83795_REG_DEVICEID);
 
-	/* Special case for rev. A chips; can't be checked first because later
-	   revisions emulate this for compatibility */
+	/*
+	 * Special case for rev. A chips; can't be checked first because later
+	 * revisions emulate this for compatibility
+	 */
 	if (device_id < 0 || (device_id & 0xf0) != 0x50) {
 		int alt_id;
 
@@ -1920,8 +1952,10 @@ static int w83795_detect(struct i2c_client *client,
 		return -ENODEV;
 	}
 
-	/* If Nuvoton chip, address of chip and W83795_REG_I2C_ADDR
-	   should match */
+	/*
+	 * If Nuvoton chip, address of chip and W83795_REG_I2C_ADDR
+	 * should match
+	 */
 	if ((bank & 0x07) == 0) {
 		i2c_addr = i2c_smbus_read_byte_data(client,
 						    W83795_REG_I2C_ADDR);
@@ -1933,10 +1967,12 @@ static int w83795_detect(struct i2c_client *client,
 		}
 	}
 
-	/* Check 795 chip type: 795G or 795ADG
-	   Usually we don't write to chips during detection, but here we don't
-	   quite have the choice; hopefully it's OK, we are about to return
-	   success anyway */
+	/*
+	 * Check 795 chip type: 795G or 795ADG
+	 * Usually we don't write to chips during detection, but here we don't
+	 * quite have the choice; hopefully it's OK, we are about to return
+	 * success anyway
+	 */
 	if ((bank & 0x07) != 0)
 		i2c_smbus_write_byte_data(client, W83795_REG_BANKSEL,
 					  bank & ~0x07);
@@ -1953,6 +1989,14 @@ static int w83795_detect(struct i2c_client *client,
 	return 0;
 }
 
+#ifdef CONFIG_SENSORS_W83795_FANCTRL
+#define NUM_PWM_ATTRIBUTES	ARRAY_SIZE(w83795_pwm[0])
+#define NUM_TEMP_ATTRIBUTES	ARRAY_SIZE(w83795_temp[0])
+#else
+#define NUM_PWM_ATTRIBUTES	4
+#define NUM_TEMP_ATTRIBUTES	8
+#endif
+
 static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 			       const struct device_attribute *))
 {
@@ -2006,24 +2050,18 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 		}
 	}
 
-#ifdef CONFIG_SENSORS_W83795_FANCTRL
 	for (i = 0; i < data->has_pwm; i++) {
-		for (j = 0; j < ARRAY_SIZE(w83795_pwm[0]); j++) {
+		for (j = 0; j < NUM_PWM_ATTRIBUTES; j++) {
 			err = fn(dev, &w83795_pwm[i][j].dev_attr);
 			if (err)
 				return err;
 		}
 	}
-#endif
 
 	for (i = 0; i < ARRAY_SIZE(w83795_temp); i++) {
 		if (!(data->has_temp & (1 << i)))
 			continue;
-#ifdef CONFIG_SENSORS_W83795_FANCTRL
-		for (j = 0; j < ARRAY_SIZE(w83795_temp[0]); j++) {
-#else
-		for (j = 0; j < 8; j++) {
-#endif
+		for (j = 0; j < NUM_TEMP_ATTRIBUTES; j++) {
 			if (j == 7 && !data->enable_beep)
 				continue;
 			err = fn(dev, &w83795_temp[i][j].dev_attr);
@@ -2183,8 +2221,10 @@ static int w83795_probe(struct i2c_client *client,
 		/* The W83795G has a dedicated BEEP pin */
 		data->enable_beep = 1;
 	} else {
-		/* The W83795ADG has a shared pin for OVT# and BEEP, so you
-		 * can't have both */
+		/*
+		 * The W83795ADG has a shared pin for OVT# and BEEP, so you
+		 * can't have both
+		 */
 		tmp = w83795_read(client, W83795_REG_OVT_CFG);
 		if ((tmp & OVT_CFG_SEL) == 0)
 			data->enable_beep = 1;