diff options
| author | Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> | 2023-11-28 10:04:36 +0200 |
|---|---|---|
| committer | Paolo Abeni <pabeni@redhat.com> | 2023-11-30 10:59:07 +0100 |
| commit | d78c0ced60d5e2f8b5a4a0468a5c400b24aeadf2 (patch) | |
| tree | e34c786fe16f8012be026098ee8fd3e65f79d999 | |
| parent | 88b74831faaee455c2af380382d979fc38e79270 (diff) | |
| download | linux-xfs-d78c0ced60d5e2f8b5a4a0468a5c400b24aeadf2.tar.gz | |
net: ravb: Make write access to CXR35 first before accessing other EMAC registers
Hardware manual of RZ/G3S (and RZ/G2L) specifies the following on the
description of CXR35 register (chapter "PHY interface select register
(CXR35)"): "After release reset, make write-access to this register before
making write-access to other registers (except MDIOMOD). Even if not need
to change the value of this register, make write-access to this register
at least one time. Because RGMII/MII MODE is recognized by accessing this
register".
The setup procedure for EMAC module (chapter "Setup procedure" of RZ/G3S,
RZ/G2L manuals) specifies the E-MAC.CXR35 register is the first EMAC
register that is to be configured.
Note [A] from chapter "PHY interface select register (CXR35)" specifies
the following:
[A] The case which CXR35 SEL_XMII is used for the selection of RGMII/MII
in APB Clock 100 MHz.
(1) To use RGMII interface, Set ‘H’03E8_0000’ to this register.
(2) To use MII interface, Set ‘H’03E8_0002’ to this register.
Take into account these indication.
Fixes: 1089877ada8d ("ravb: Add RZ/G2L MII interface support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
| -rw-r--r-- | drivers/net/ethernet/renesas/ravb_main.c | 17 |
1 files changed, 9 insertions, 8 deletions
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 96b38d1e39aeb..4d57ecfdfe61c 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -515,6 +515,15 @@ static void ravb_emac_init_gbeth(struct net_device *ndev) { struct ravb_private *priv = netdev_priv(ndev); + if (priv->phy_interface == PHY_INTERFACE_MODE_MII) { + ravb_write(ndev, (1000 << 16) | CXR35_SEL_XMII_MII, CXR35); + ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, 0); + } else { + ravb_write(ndev, (1000 << 16) | CXR35_SEL_XMII_RGMII, CXR35); + ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, + CXR31_SEL_LINK0); + } + /* Receive frame limit set register */ ravb_write(ndev, GBETH_RX_BUFF_MAX + ETH_FCS_LEN, RFLR); @@ -537,14 +546,6 @@ static void ravb_emac_init_gbeth(struct net_device *ndev) /* E-MAC interrupt enable register */ ravb_write(ndev, ECSIPR_ICDIP, ECSIPR); - - if (priv->phy_interface == PHY_INTERFACE_MODE_MII) { - ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, 0); - ravb_write(ndev, (1000 << 16) | CXR35_SEL_XMII_MII, CXR35); - } else { - ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, - CXR31_SEL_LINK0); - } } static void ravb_emac_init_rcar(struct net_device *ndev) |