Merge tag 'soc-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC fixes from Arnd Bergmann:
 "The device tree changes this time are all for NXP i.MX platforms,
  addressing issues with clocks and regulators on i.MX7 and i.MX8.

  The old OMAP2 based Nokia N8x0 tablet get a couple of code fixes for
  regressions that came in.

  The ARM SCMI and FF-A firmware interfaces get a couple of minor bug
  fixes.

  A regression fix for RISC-V cache management addresses a problem with
  probe order on Sifive cores"

* tag 'soc-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
  MAINTAINERS: Change Krzysztof Kozlowski's email address
  arm64: dts: imx8qm-ss-dma: fix can lpcg indices
  arm64: dts: imx8-ss-dma: fix can lpcg indices
  arm64: dts: imx8-ss-dma: fix adc lpcg indices
  arm64: dts: imx8-ss-dma: fix pwm lpcg indices
  arm64: dts: imx8-ss-dma: fix spi lpcg indices
  arm64: dts: imx8-ss-conn: fix usb lpcg indices
  arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
  ARM: dts: imx7s-warp: Pass OV2680 link-frequencies
  ARM: dts: imx7-mba7: Use 'no-mmc' property
  arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
  arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulator
  arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulator
  cache: sifive_ccache: Partially convert to a platform driver
  firmware: arm_scmi: Make raw debugfs entries non-seekable
  firmware: arm_scmi: Fix wrong fastchannel initialization
  firmware: arm_ffa: Fix the partition ID check in ffa_notification_info_get()
  ARM: OMAP2+: fix USB regression on Nokia N8x0
  mmc: omap: restore original power up/down steps
  mmc: omap: fix deferred probe
  ...

[ upstream commit: 678e14c772130d3a83225ed56fb9860a40bca38b ]

8 files changed, 44 insertions, 43 deletions

diff --git a/src/arm/nxp/imx/imx7-mba7.dtsi b/src/arm/nxp/imx/imx7-mba7.dtsi
index 1235a71c6abe96..52869e68f833c4 100644
--- a/src/arm/nxp/imx/imx7-mba7.dtsi
+++ b/src/arm/nxp/imx/imx7-mba7.dtsi
@@ -666,7 +666,7 @@
 	bus-width = <4>;
 	no-1-8-v;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 	status = "okay";
 };
 
diff --git a/src/arm/nxp/imx/imx7s-warp.dts b/src/arm/nxp/imx/imx7s-warp.dts
index ba7231b364bb8c..7bab113ca6da79 100644
--- a/src/arm/nxp/imx/imx7s-warp.dts
+++ b/src/arm/nxp/imx/imx7s-warp.dts
@@ -210,6 +210,7 @@
 				remote-endpoint = <&mipi_from_sensor>;
 				clock-lanes = <0>;
 				data-lanes = <1>;
+				link-frequencies = /bits/ 64 <330000000>;
 			};
 		};
 	};
diff --git a/src/arm64/freescale/imx8-ss-conn.dtsi b/src/arm64/freescale/imx8-ss-conn.dtsi
index 3c42240e78e245..4aaf5a0c1ed8af 100644
--- a/src/arm64/freescale/imx8-ss-conn.dtsi
+++ b/src/arm64/freescale/imx8-ss-conn.dtsi
@@ -41,7 +41,7 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		fsl,usbphy = <&usbphy1>;
 		fsl,usbmisc = <&usbmisc1 0>;
-		clocks = <&usb2_lpcg 0>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
 		ahb-burst-config = <0x0>;
 		tx-burst-size-dword = <0x10>;
 		rx-burst-size-dword = <0x10>;
@@ -58,7 +58,7 @@ conn_subsys: bus@5b000000 {
 	usbphy1: usbphy@5b100000 {
 		compatible = "fsl,imx7ulp-usbphy";
 		reg = <0x5b100000 0x1000>;
-		clocks = <&usb2_lpcg 1>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
 		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
 		status = "disabled";
 	};
@@ -67,8 +67,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
@@ -78,8 +78,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
@@ -91,8 +91,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";
diff --git a/src/arm64/freescale/imx8-ss-dma.dtsi b/src/arm64/freescale/imx8-ss-dma.dtsi
index cab3468b1875ee..f7a91d43a0ffe1 100644
--- a/src/arm64/freescale/imx8-ss-dma.dtsi
+++ b/src/arm64/freescale/imx8-ss-dma.dtsi
@@ -28,8 +28,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi0_lpcg 0>,
-			 <&spi0_lpcg 1>;
+		clocks = <&spi0_lpcg IMX_LPCG_CLK_0>,
+			 <&spi0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -44,8 +44,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi1_lpcg 0>,
-			 <&spi1_lpcg 1>;
+		clocks = <&spi1_lpcg IMX_LPCG_CLK_0>,
+			 <&spi1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -60,8 +60,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi2_lpcg 0>,
-			 <&spi2_lpcg 1>;
+		clocks = <&spi2_lpcg IMX_LPCG_CLK_0>,
+			 <&spi2_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -76,8 +76,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi3_lpcg 0>,
-			 <&spi3_lpcg 1>;
+		clocks = <&spi3_lpcg IMX_LPCG_CLK_0>,
+			 <&spi3_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -145,8 +145,8 @@ dma_subsys: bus@5a000000 {
 		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
 		reg = <0x5a190000 0x1000>;
 		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&adma_pwm_lpcg 1>,
-			 <&adma_pwm_lpcg 0>;
+		clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&adma_pwm_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -355,8 +355,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a880000 0x10000>;
 		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc0_lpcg 0>,
-			 <&adc0_lpcg 1>;
+		clocks = <&adc0_lpcg IMX_LPCG_CLK_0>,
+			 <&adc0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -370,8 +370,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a890000 0x10000>;
 		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc1_lpcg 0>,
-			 <&adc1_lpcg 1>;
+		clocks = <&adc1_lpcg IMX_LPCG_CLK_0>,
+			 <&adc1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -384,8 +384,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a8d0000 0x10000>;
 		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -405,8 +405,8 @@ dma_subsys: bus@5a000000 {
 		 * CAN1 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -426,8 +426,8 @@ dma_subsys: bus@5a000000 {
 		 * CAN2 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
diff --git a/src/arm64/freescale/imx8-ss-lsio.dtsi b/src/arm64/freescale/imx8-ss-lsio.dtsi
index 7e510b21bbac55..764c1a08e3b118 100644
--- a/src/arm64/freescale/imx8-ss-lsio.dtsi
+++ b/src/arm64/freescale/imx8-ss-lsio.dtsi
@@ -25,8 +25,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d000000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm0_lpcg 4>,
-			 <&pwm0_lpcg 1>;
+		clocks = <&pwm0_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm0_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -38,8 +38,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d010000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm1_lpcg 4>,
-			 <&pwm1_lpcg 1>;
+		clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm1_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -51,8 +51,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d020000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm2_lpcg 4>,
-			 <&pwm2_lpcg 1>;
+		clocks = <&pwm2_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm2_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -64,8 +64,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d030000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm3_lpcg 4>,
-			 <&pwm3_lpcg 1>;
+		clocks = <&pwm3_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm3_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
diff --git a/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi b/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi
index 41c79d2ebdd620..f24b14744799e1 100644
--- a/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi
+++ b/src/arm64/freescale/imx8mp-venice-gw72xx.dtsi
@@ -14,6 +14,7 @@
 		pinctrl-0 = <&pinctrl_usbcon1>;
 		type = "micro";
 		label = "otg";
+		vbus-supply = <&reg_usb1_vbus>;
 		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 
 		port {
@@ -183,7 +184,6 @@
 };
 
 &usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
 
diff --git a/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi b/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi
index d5c400b355af56..f5491a608b2f37 100644
--- a/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi
+++ b/src/arm64/freescale/imx8mp-venice-gw73xx.dtsi
@@ -14,6 +14,7 @@
 		pinctrl-0 = <&pinctrl_usbcon1>;
 		type = "micro";
 		label = "otg";
+		vbus-supply = <&reg_usb1_vbus>;
 		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 
 		port {
@@ -202,7 +203,6 @@
 };
 
 &usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
 
diff --git a/src/arm64/freescale/imx8qm-ss-dma.dtsi b/src/arm64/freescale/imx8qm-ss-dma.dtsi
index 11626fae5f97f3..aa9f28c4431d02 100644
--- a/src/arm64/freescale/imx8qm-ss-dma.dtsi
+++ b/src/arm64/freescale/imx8qm-ss-dma.dtsi
@@ -153,15 +153,15 @@
 };
 
 &flexcan2 {
-	clocks = <&can1_lpcg 1>,
-		 <&can1_lpcg 0>;
+	clocks = <&can1_lpcg IMX_LPCG_CLK_4>,
+		 <&can1_lpcg IMX_LPCG_CLK_0>;
 	assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>;
 	fsl,clk-source = /bits/ 8 <1>;
 };
 
 &flexcan3 {
-	clocks = <&can2_lpcg 1>,
-		 <&can2_lpcg 0>;
+	clocks = <&can2_lpcg IMX_LPCG_CLK_4>,
+		 <&can2_lpcg IMX_LPCG_CLK_0>;
 	assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>;
 	fsl,clk-source = /bits/ 8 <1>;
 };