arm: return both physical and virtual addresses from addruart

Rather than checking the MMU status in every instance of addruart, do it
once in kernel/debug.S, and change the existing addruart macros to
return both physical and virtual addresses. The main debug code can then
select the appropriate address to use.

This will also allow us to retreive the address of a uart for the MMU
state that we're not current in.

Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com>
and Tony Lindgren <tony@atomide.com>, and fix for versatile express from
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>

56 files changed, 440 insertions, 454 deletions

diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index f91395206a4b97..a0f07521ca8a2d 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -22,7 +22,7 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
 		@@ debug using ARM EmbeddedICE DCC channel
 
-		.macro	addruart, rx, tmp
+		.macro	addruart, rp, rv
 		.endm
 
 #if defined(CONFIG_CPU_V6)
@@ -121,6 +121,22 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 #include <mach/debug-macro.S>
 #endif	/* CONFIG_DEBUG_ICEDCC */
 
+#ifdef CONFIG_MMU
+		.macro	addruart_current, rx, tmp1, tmp2
+		addruart	\tmp1, \tmp2
+		mrc		p15, 0, \rx, c1, c0
+		tst		\rx, #1
+		moveq		\rx, \tmp1
+		movne		\rx, \tmp2
+		.endm
+
+#else /* !CONFIG_MMU */
+		.macro	addruart_current, rx, tmp1, tmp2
+		addruart	\rx, \tmp1
+		.endm
+
+#endif /* CONFIG_MMU */
+
 /*
  * Useful debugging routines
  */
@@ -155,7 +171,7 @@ ENDPROC(printhex2)
 		.ltorg
 
 ENTRY(printascii)
-		addruart r3, r1
+		addruart_current r3, r1, r2
 		b	2f
 1:		waituart r2, r3
 		senduart r1, r3
@@ -171,7 +187,7 @@ ENTRY(printascii)
 ENDPROC(printascii)
 
 ENTRY(printch)
-		addruart r3, r1
+		addruart_current r3, r1, r2
 		mov	r1, r0
 		mov	r0, #0
 		b	1b
diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
index a9cac368bfe69f..bc7ad5561c4cae 100644
--- a/arch/arm/mach-aaec2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -10,12 +10,10 @@
  */
 
 #include "hardware.h"
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000		@ physical
-		movne	\rx, #io_p2v(0x80000000)	@ virtual
-		orr	\rx, \rx, #0x00000800
+		.macro	addruart, rp, rv
+		mov	\rp, 0x00000800
+		orr	\rv, \rp, #io_p2v(0x80000000)	@ virtual
+		orr	\rp, \rp, #0x80000000		@ physical
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index 9e750a1c1b5a80..0f959faf74a9ff 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,11 +14,9 @@
 #include <mach/hardware.h>
 #include <mach/at91_dbgu.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1						@ MMU enabled?
-	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
-	ldrne	\rx, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
+	.macro	addruart, rp, rv
+	ldr	\rp, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
+	ldr	\rv, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
 	.endm
 
 	.macro	senduart,rd,rx
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 072cc6b61ba30b..507c6873b7ee7e 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -14,16 +14,14 @@
 #include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #CLPS7111_PHYS_BASE
-		movne	\rx, #CLPS7111_VIRT_BASE
+		.macro	addruart, rp, rv
 #ifndef CONFIG_DEBUG_CLPS711X_UART2
-		add	\rx, \rx, #0x0000	@ UART1
+		mov	\rp, #0x0000	@ UART1
 #else
-		add	\rx, \rx, #0x1000	@ UART2
+		mov	\rp, #0x1000	@ UART2
 #endif
+		orr	\rv, \rp, #CLPS7111_VIRT_BASE
+		orr	\rp, \rp, #CLPS7111_PHYS_BASE
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
index d16ce7eb00e909..56d828634db5d8 100644
--- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
@@ -10,12 +10,10 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf0000000	@ virtual base
-		orr	\rx, \rx, #0x00009000
+		.macro	addruart,rp,rv
+		mov	\rp, #0x00009000
+		orr	\rv, \rp, #0xf0000000	@ virtual base
+		orr	\rp, \rp, #0x10000000
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index f761dfdb8689b3..9f1befc5ac387d 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -29,35 +29,39 @@ davinci_uart_phys:	.word	0
 davinci_uart_virt:	.word	0
 		.popsection
 
-		.macro addruart, rx, tmp
+		.macro addruart, rp, rv
 
 		/* Use davinci_uart_phys/virt if already configured */
-10:		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =__virt_to_phys(davinci_uart_phys)
-		ldrne	\rx, =davinci_uart_virt
-		ldr	\rx, [\rx]
-		cmp	\rx, #0			@ is port configured?
+10:		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		ldreq	\rp, =__virt_to_phys(davinci_uart_phys)
+		ldrne	\rp, =davinci_uart_phys
+		add	\rv, \rp, #4		@ davinci_uart_virt
+		ldr	\rp, [\rp, #0]
+		ldr	\rv, [\rv, #0]
+		cmp	\rp, #0			@ is port configured?
+		cmpne	\rv, #0
 		bne	99f			@ already configured
 
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
+		/* Check the debug UART address set in uncompress.h */
+		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
 
 		/* Copy uart phys address from decompressor uart info */
-		ldreq	\tmp, =__virt_to_phys(davinci_uart_phys)
-		ldrne	\tmp, =davinci_uart_phys
-		ldreq	\rx, =DAVINCI_UART_INFO
-		ldrne	\rx, =__phys_to_virt(DAVINCI_UART_INFO)
-		ldr	\rx, [\rx, #0]
-		str	\rx, [\tmp]
+		ldreq	\rv, =__virt_to_phys(davinci_uart_phys)
+		ldrne	\rv, =davinci_uart_phys
+		ldreq	\rp, =DAVINCI_UART_INFO
+		ldrne	\rp, =__phys_to_virt(DAVINCI_UART_INFO)
+		ldr	\rp, [\rp, #0]
+		str	\rp, [\rv]
 
 		/* Copy uart virt address from decompressor uart info */
-		ldreq	\tmp, =__virt_to_phys(davinci_uart_virt)
-		ldrne	\tmp, =davinci_uart_virt
-		ldreq	\rx, =DAVINCI_UART_INFO
-		ldrne	\rx, =__phys_to_virt(DAVINCI_UART_INFO)
-		ldr	\rx, [\rx, #4]
-		str	\rx, [\tmp]
+		ldreq	\rv, =__virt_to_phys(davinci_uart_virt)
+		ldrne	\rv, =davinci_uart_virt
+		ldreq	\rp, =DAVINCI_UART_INFO
+		ldrne	\rp, =__phys_to_virt(DAVINCI_UART_INFO)
+		ldr	\rp, [\rp, #4]
+		str	\rp, [\rv]
 
 		b	10b
 99:
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
index 1521d13f1d1492..da8bf2bad3b1df 100644
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =DOVE_SB_REGS_PHYS_BASE
-	ldrne	\rx, =DOVE_SB_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro	addruart, rp, rv
+	ldr	\rp, =DOVE_SB_REGS_PHYS_BASE
+	ldr	\rv, =DOVE_SB_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index ebbd89f0e6c0e8..7ef5690fd08c87 100644
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -11,9 +11,10 @@
  *
 **/
 
-		.macro	addruart, rx, tmp
-		mov	\rx, #0xf0000000
-		orr	\rx, \rx, #0x00000be0
+		.macro	addruart, rp, rv
+		mov	\rp, #0xf0000000
+		orr	\rp, \rp, #0x00000be0
+		mov	\rp, \rv
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index 5cd22444e2236a..b25bc90763673d 100644
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -11,12 +11,11 @@
  */
 #include <mach/ep93xx-regs.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ MMU enabled?
-		ldreq	\rx, =EP93XX_APB_PHYS_BASE	@ Physical base
-		ldrne	\rx, =EP93XX_APB_VIRT_BASE	@ virtual base
-		orr	\rx, \rx, #0x000c0000
+		.macro	addruart, rp, rv
+		ldr	\rp, =EP93XX_APB_PHYS_BASE	@ Physical base
+		ldr	\rv, =EP93XX_APB_VIRT_BASE	@ virtual base
+		orr	\rp, \rp, #0x000c0000
+		orr	\rv, \rv, #0x000c0000
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 60dda1318f2285..3c9e0c40c67919 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -15,12 +15,10 @@
 
 #ifndef CONFIG_DEBUG_DC21285_PORT
 	/* For NetWinder debugging */
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x7c000000	@ physical
-		movne	\rx, #0xff000000	@ virtual
-		orr	\rx, \rx, #0x000003f8
+		.macro	addruart, rp, rv
+		mov	\rp, #0x000003f8
+		orr	\rv, \rp, #0x7c000000	@ physical
+		orr	\rp, \rp, #0xff000000	@ virtual
 		.endm
 
 #define UART_SHIFT	0
@@ -32,14 +30,14 @@
 		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
 		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x42000000
-		movne	\rx, #dc21285_high
+		.macro	addruart, rp, rv
 		.if	dc21285_low
-		orrne	\rx, \rx, #dc21285_low
+		mov	\rp, #dc21285_low
+		.else
+		mov	\rp, #0
 		.endif
+		orr	\rv, \rp, #0x42000000
+		orr	\rp, \rp, #dc21285_high
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
index ad477047069ddc..f40e006d296e66 100644
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -11,11 +11,9 @@
  */
 #include <mach/hardware.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =GEMINI_UART_BASE			@ physical
-	ldrne	\rx, =IO_ADDRESS(GEMINI_UART_BASE)	@ virtual
+	.macro	addruart, rp, rv
+	ldr	\rp, =GEMINI_UART_BASE			@ physical
+	ldr	\rv, =IO_ADDRESS(GEMINI_UART_BASE)	@ virtual
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index 27cafd12f033cb..c2093e835720f5 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -16,12 +16,10 @@
 		.equ    io_virt, IO_VIRT
 		.equ    io_phys, IO_PHYS
 
-		.macro  addruart, rx, tmp
-		mrc     p15, 0, \rx, c1, c0
-		tst     \rx, #1  	       @ MMU enabled?
-		moveq   \rx, #io_phys	       @ physical base address
-		movne   \rx, #io_virt	       @ virtual address
-		add     \rx, \rx, #0x00020000   @ UART1
+		.macro  addruart, rp, rv
+		mov     \rp, #0x00020000	@ UART1
+		add     \rv, \rp, #io_virt	@ virtual address
+		add     \rp, \rp, #io_phys	@ physical base address
 		.endm
 
 		.macro  senduart,rd,rx
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index 87a6888ae011ba..a1f598fd3a5672 100644
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -11,12 +11,10 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x16000000	@ physical base address
-		movne	\rx, #0xf0000000	@ virtual base
-		addne	\rx, \rx, #0x16000000 >> 4
+		.macro	addruart, rp, rv
+		mov	\rp, #0x16000000	@ physical base address
+		mov	\rv, #0xf0000000	@ virtual base
+		add	\rv, \rv, #0x16000000 >> 4
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index c9d6ba46963da9..e664466d51bf47 100644
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -11,15 +11,13 @@
  * published by the Free Software Foundation.
  */
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1			@ mmu enabled?
-	moveq	\rx, #0xff000000	@ physical
-	orreq	\rx, \rx, #0x00d80000
-	movne	\rx, #0xfe000000	@ virtual
-	orrne	\rx, \rx, #0x00e80000
-	orr	\rx, \rx, #0x00002300
-	orr	\rx, \rx, #0x00000040
+	.macro	addruart, rp, rv
+	mov	\rp, #0x00002300
+	orr	\rp, \rp, #0x00000040
+	orr	\rv, \rp, #0xfe000000	@ virtual
+	orr	\rv, \rv, #0x00e80000
+	orr	\rp, \rp, #0xff000000	@ physical
+	orr	\rp, \rp, #0x00d80000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index 736afe1edd1f66..ff9e76c09f35b2 100644
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -11,9 +11,10 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart, rx, tmp
-		mov	\rx, #0xfe000000	@ physical as well as virtual
-		orr	\rx, \rx, #0x00800000	@ location of the UART
+		.macro	addruart, rp, rv
+		mov	\rp, #0xfe000000	@ physical as well as virtual
+		orr	\rp, \rp, #0x00800000	@ location of the UART
+		mov	\rv, \rp
 		.endm
 
 #define UART_SHIFT	0
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index addb2da78422b0..40c500dd1fac61 100644
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -11,13 +11,11 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ mmu enabled?
-		moveq	\rx, #0xff000000	@ physical
-		movne	\rx, #0xfe000000	@ virtual
-		orr	\rx, \rx, #0x00ff0000
-		orr	\rx, \rx, #0x0000f700
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00ff0000
+		orr	\rp, \rp, #0x0000f700
+		orr	\rv, #0xfe000000	@ virtual
+		orr	\rp, #0xff000000	@ physical
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index 6a827681680fe2..0ef533b2097213 100644
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -11,16 +11,14 @@
  *
 */
 
-		.macro  addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0xc0000000	@ Physical base
-		movne	\rx, #0xfe000000	@ virtual base
-		orrne	\rx, \rx, #0x00f00000
-		orr	\rx, \rx, #0x00030000
+		.macro  addruart, rp, rv
+		mov	\rp, #0x00030000
 #ifdef	__ARMEB__
-		orr	\rx, \rx, #0x00000003
+		orr	\rp, \rp, #0x00000003
 #endif
+		orr	\rv, \rp, #0xfe000000	@ virtual base
+		orr	\rv, \rv, #0x00f00000
+		orr	\rp, \rp, #0xc0000000	@ Physical base
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index a82e375465e283..f7c6eef7fa220d 100644
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -12,13 +12,12 @@
  */
 #include <mach/ixp23xx.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ mmu enabled?
-		ldreq	\rx, =IXP23XX_PERIPHERAL_PHYS 	@ physical
-		ldrne	\rx, =IXP23XX_PERIPHERAL_VIRT	@ virtual
+		.macro	addruart, rp, rv
+		ldr	\rp, =IXP23XX_PERIPHERAL_PHYS 	@ physical
+		ldr	\rv, =IXP23XX_PERIPHERAL_VIRT	@ virtual
 #ifdef __ARMEB__
-		orr	\rx, \rx, #0x00000003
+		orr	\rp, \rp, #0x00000003
+		orr	\rv, \rv, #0x00000003
 #endif
 		.endm
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index 3fc66d6d00a01f..b974a49c0aff45 100644
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -10,16 +10,16 @@
  * published by the Free Software Foundation.
 */
 
-                .macro  addruart, rx, tmp
-                mrc     p15, 0, \rx, c1, c0
-                tst     \rx, #1                 @ MMU enabled?
-                moveq   \rx, #0xc8000000
-                movne   \rx, #0xff000000
-		orrne	\rx, \rx, #0x00b00000
+                .macro  addruart, rp, rv
 #ifdef __ARMEB__
-                add     \rx,\rx,#3              @ Uart regs are at off set of 3 if
-						@ byte writes used - Big Endian.
+                mov     \rp, #3         @ Uart regs are at off set of 3 if
+					@ byte writes used - Big Endian.
+#else
+		mov	\rp, #0
 #endif
+                orr     \rv, \rp, #0xff000000	@ virtual
+		orr	\rv, \rv, #0x00b00000
+                orr     \rp, \rp, #0xc8000000	@ physical
                 .endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index d0606774dea7de..db06ae437d08c6 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =KIRKWOOD_REGS_PHYS_BASE
-	ldrne	\rx, =KIRKWOOD_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro	addruart, rp, rv
+	ldr	\rp, =KIRKWOOD_REGS_PHYS_BASE
+	ldr	\rv, =KIRKWOOD_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index cf2095da2372cd..bf516adf19250d 100644
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -14,11 +14,9 @@
 #include <mach/hardware.h>
 #include <mach/regs-uart.h>
 
-	.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ MMU enabled?
-		ldreq	\rx, =KS8695_UART_PA		@ physical base address
-		ldrne	\rx, =KS8695_UART_VA		@ virtual base address
+	.macro	addruart, rp, rv
+		ldr	\rp, =KS8695_UART_PA		@ physical base address
+		ldr	\rv, =KS8695_UART_VA		@ virtual base address
 	.endm
 
 	.macro	senduart, rd, rx
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
new file mode 100644
index 00000000000000..b0a2db77d39267
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-l7200/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.equ	io_virt, IO_BASE
+		.equ	io_phys, IO_START
+
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00044000	@ UART1
+@		mov	\rp, #0x00045000	@ UART2
+		add	\rv, \rp, #io_virt	@ virtual address
+		add	\rp, \rp, #io_phys	@ physical base address
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x0]	@ UARTDR
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
index c0dcbbba22ba6f..cff33625276faa 100644
--- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -14,12 +14,10 @@
 	@ It is not known if this will be appropriate for every 40x
 	@ board.
 
-		.macro  addruart, rx, tmp
-		mrc     p15, 0, \rx, c1, c0
-		tst     \rx, #1                 @ MMU enabled?
-		mov     \rx, #0x00000700        @ offset from base
-		orreq   \rx, \rx, #0x80000000   @ physical base
-		orrne   \rx, \rx, #0xf8000000   @ virtual base
+		.macro  addruart, rp, rv
+		mov     \rp, #0x00000700        @ offset from base
+		orr     \rv, \rp, #0xf8000000   @ virtual base
+		orr     \rp, \rp, #0x80000000   @ physical base
 		.endm
 
 		.macro  senduart,rd,rx
diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
index 3136c913a92c2c..cc90d99ac76ce8 100644
--- a/arch/arm/mach-loki/include/mach/debug-macro.S
+++ b/arch/arm/mach-loki/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
 
 #include <mach/loki.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =LOKI_REGS_PHYS_BASE
-	ldrne	\rx, =LOKI_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro	addruart, rp, rv
+	ldr	\rp, =LOKI_REGS_PHYS_BASE
+	ldr	\rv, =LOKI_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
index 621744d6b15205..629e744aeb9e98 100644
--- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
@@ -20,11 +20,9 @@
  * Debug output is hardcoded to standard UART 5
 */
 
-	.macro	addruart,rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1				@ MMU enabled?
-	ldreq	\rx, =0x40090000
-	ldrne	\rx, =0xF4090000
+	.macro	addruart, rp, rv
+	ldreq	\rp, =0x40090000
+	ldrne	\rv, =0xF4090000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index 76deff238e1c5f..7e2ebd3efc7c0b 100644
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -11,12 +11,11 @@
 
 #include <mach/addr-map.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ MMU enabled?
-		ldreq	\rx, =APB_PHYS_BASE		@ physical
-		ldrne	\rx, =APB_VIRT_BASE		@ virtual
-		orr	\rx, \rx, #0x00017000
+		.macro	addruart, rp, rv
+		ldr	\rp, =APB_PHYS_BASE		@ physical
+		ldr	\rv, =APB_VIRT_BASE		@ virtual
+		orr	\rp, \rp, #0x00017000
+		orr	\rv, \rv, #0x00017000
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 238c4f132cdb95..fbd5d90dcc8ce3 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -20,12 +20,9 @@
 #include <mach/msm_iomap.h>
 
 #ifdef CONFIG_HAS_MSM_DEBUG_UART_PHYS
-	.macro	addruart, rx, tmp
-	@ see if the MMU is enabled and select appropriate base address
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1
-	ldreq	\rx, =MSM_DEBUG_UART_PHYS
-	ldrne	\rx, =MSM_DEBUG_UART_BASE
+	.macro	addruart, rp, rv
+	ldr	\rp, =MSM_DEBUG_UART_PHYS
+	ldr	\rv, =MSM_DEBUG_UART_BASE
 	.endm
 
 	.macro	senduart,rd,rx
@@ -39,16 +36,7 @@
 	tst	\rd, #0x04
 	beq	1001b
 	.endm
-#else
-	.macro	addruart, rx, tmp
-	.endm
-
-	.macro	senduart,rd,rx
-	.endm
-
-	.macro	waituart,rd,rx
-	.endm
-#endif
 
 	.macro	busyuart,rd,rx
 	.endm
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index cd81689c4621da..04891428e48bcd 100644
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
 
 #include <mach/mv78xx0.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =MV78XX0_REGS_PHYS_BASE
-	ldrne	\rx, =MV78XX0_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro	addruart, rp, rv
+	ldr	\rp, =MV78XX0_REGS_PHYS_BASE
+	ldr	\rv, =MV78XX0_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index e96339e71d88fe..56a9152281801f 100644
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -13,12 +13,10 @@
 
 #include "hardware.h"
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x00100000		@ physical
-		movne	\rx, #io_p2v(0x00100000)	@ virtual
-		orr	\rx, \rx, #0x00000a00
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00000a00
+		orr	\rv, \rp, #io_p2v(0x00100000)	@ virtual
+		orr	\rp, \rp, #0x00100000		@ physical
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
index 4f92acfba9545a..e7151b4b88896f 100644
--- a/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -10,13 +10,11 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x10000000	@ physical base address
-		movne	\rx, #0xf0000000	@ virtual base
-		add	\rx, \rx, #0x00100000
-		add	\rx, \rx, #0x000fb000
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00100000
+		add	\rp, \rp, #0x000fb000
+		add	\rv, \rp, #0xf0000000	@ virtual base
+		add	\rp, \rp, #0x10000000	@ physical base address
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index 5c934bdb71583e..5a2acbdc3d679f 100644
--- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -12,11 +12,9 @@
 
 #include <mach/regs-board-a9m9750dev.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, =NS9XXX_CSxSTAT_PHYS(0)
-		ldrne	\rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+		.macro	addruart, rp, rv
+		ldr	\rp, =NS9XXX_CSxSTAT_PHYS(0)
+		ldr	\rv, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 671408eb4ab42f..6a0fa046236502 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -28,56 +28,58 @@ omap_uart_virt:	.word	0x0
 		 * the desired UART phys and virt addresses temporarily into
 		 * the omap_uart_phys and omap_uart_virt above.
 		 */
-		.macro	addruart, rx, tmp
+		.macro	addruart, rp, rv
 
 		/* Use omap_uart_phys/virt if already configured */
-9:		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =__virt_to_phys(omap_uart_phys)	@ physical base address
-		ldrne	\rx, =omap_uart_virt	@ virtual base
-		ldr	\rx, [\rx, #0]
-		cmp	\rx, #0			@ is port configured?
+9:		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		ldreq	\rp, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldrne	\rp, =omap_uart_phys	@ MMU enabled
+		add	\rv, \rp, #4		@ omap_uart_virt
+		ldr	\rp, [\rp, #0]
+		ldr	\rv, [\rv, #0]
+		cmp	\rp, #0			@ is port configured?
+		cmpne	\rv, #0
 		bne	99f			@ already configured
 
 		/* Check the debug UART configuration set in uncompress.h */
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =OMAP_UART_INFO
-		ldrne	\rx, =__phys_to_virt(OMAP_UART_INFO)
-		ldr	\rx, [\rx, #0]
+		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		ldreq	\rp, =OMAP_UART_INFO	@ MMU not enabled
+		ldrne	\rp, =__phys_to_virt(OMAP_UART_INFO)	@ MMU enabled
+		ldr	\rp, [\rp, #0]
 
 		/* Select the UART to use based on the UART1 scratchpad value */
-10:		cmp	\rx, #0			@ no port configured?
+10:		cmp	\rp, #0			@ no port configured?
 		beq	11f			@ if none, try to use UART1
-		cmp	\rx, #OMAP1UART1
+		cmp	\rp, #OMAP1UART1
 		beq	11f			@ configure OMAP1UART1
-		cmp	\rx, #OMAP1UART2
+		cmp	\rp, #OMAP1UART2
 		beq	12f			@ configure OMAP1UART2
-		cmp	\rx, #OMAP1UART3
+		cmp	\rp, #OMAP1UART3
 		beq	13f			@ configure OMAP2UART3
 
 		/* Configure the UART offset from the phys/virt base */
-11:		mov	\rx, #0x00fb0000	@ OMAP1UART1
+11:		mov	\rp, #0x00fb0000	@ OMAP1UART1
 		b	98f
-12:		mov	\rx, #0x00fb0000	@ OMAP1UART1
-		orr	\rx, \rx, #0x00000800	@ OMAP1UART2
+12:		mov	\rp, #0x00fb0000	@ OMAP1UART1
+		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
 		b	98f
-13:		mov	\rx, #0x00fb0000	@ OMAP1UART1
-		orr	\rx, \rx, #0x00000800	@ OMAP1UART2
-		orr	\rx, \rx, #0x00009000	@ OMAP1UART3
+13:		mov	\rp, #0x00fb0000	@ OMAP1UART1
+		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
+		orr	\rp, \rp, #0x00009000	@ OMAP1UART3
 
 		/* Store both phys and virt address for the uart */
-98:		add	\rx, \rx, #0xff000000	@ phys base
-		mrc	p15, 0, \tmp, c1, c0
-		tst	\tmp, #1		@ MMU enabled?
-		ldreq	\tmp, =__virt_to_phys(omap_uart_phys)
-		ldrne	\tmp, =omap_uart_phys
-		str	\rx, [\tmp, #0]
-		sub	\rx, \rx, #0xff000000	@ phys base
-		add	\rx, \rx, #0xfe000000	@ virt base
-		ldreq	\tmp, =__virt_to_phys(omap_uart_virt)
-		ldrne	\tmp, =omap_uart_virt
-		str	\rx, [\tmp, #0]
+98:		add	\rp, \rp, #0xff000000	@ phys base
+		mrc	p15, 0, \rv, c1, c0
+		tst	\rv, #1			@ MMU enabled?
+		ldreq	\rv, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldrne	\rv, =omap_uart_phys	@ MMU enabled
+		str	\rp, [\rv, #0]
+		sub	\rp, \rp, #0xff000000	@ phys base
+		add	\rp, \rp, #0xfe000000	@ virt base
+		add	\rv, \rv, #4		@ omap_uart_lsr
+		str	\rp, [\rv, #0]
 		b	9b
 99:
 		.endm
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 09331bbbda52b6..6a4d4136002ed9 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -31,95 +31,94 @@ omap_uart_lsr:	.word	0
 		 * the desired UART phys and virt addresses temporarily into
 		 * the omap_uart_phys and omap_uart_virt above.
 		 */
-		.macro	addruart, rx, tmp
+		.macro	addruart, rp, rv
 
 		/* Use omap_uart_phys/virt if already configured */
-10:		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =__virt_to_phys(omap_uart_phys)	@ physical base address
-		ldrne	\rx, =omap_uart_virt	@ virtual base address
-		ldr	\rx, [\rx, #0]
-		cmp	\rx, #0			@ is port configured?
+10:		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		ldreq	\rp, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldrne	\rp, =omap_uart_phys	@ MMU enabled
+		add	\rv, \rp, #4		@ omap_uart_virt
+		ldr	\rp, [\rp, #0]
+		ldr	\rv, [\rv, #0]
+		cmp	\rp, #0			@ is port configured?
+		cmpne	\rv, #0
 		bne	99f			@ already configured
 
 		/* Check the debug UART configuration set in uncompress.h */
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =OMAP_UART_INFO
-		ldrne	\rx, =__phys_to_virt(OMAP_UART_INFO)
-		ldr	\rx, [\rx, #0]
+		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		ldreq	\rp, =OMAP_UART_INFO	@ MMU not enabled
+		ldrne	\rp, =__phys_to_virt(OMAP_UART_INFO)	@ MMU enabled
+		ldr	\rp, [\rp, #0]
 
 		/* Select the UART to use based on the UART1 scratchpad value */
-		cmp	\rx, #0			@ no port configured?
+		cmp	\rp, #0			@ no port configured?
 		beq	21f			@ if none, try to use UART1
-		cmp	\rx, #OMAP2UART1	@ OMAP2/3/4UART1
+		cmp	\rp, #OMAP2UART1	@ OMAP2/3/4UART1
 		beq	21f			@ configure OMAP2/3/4UART1
-		cmp	\rx, #OMAP2UART2	@ OMAP2/3/4UART2
+		cmp	\rp, #OMAP2UART2	@ OMAP2/3/4UART2
 		beq	22f			@ configure OMAP2/3/4UART2
-		cmp	\rx, #OMAP2UART3	@ only on 24xx
+		cmp	\rp, #OMAP2UART3	@ only on 24xx
 		beq	23f			@ configure OMAP2UART3
-		cmp	\rx, #OMAP3UART3	@ only on 34xx
+		cmp	\rp, #OMAP3UART3	@ only on 34xx
 		beq	33f			@ configure OMAP3UART3
-		cmp	\rx, #OMAP4UART3	@ only on 44xx
+		cmp	\rp, #OMAP4UART3	@ only on 44xx
 		beq	43f			@ configure OMAP4UART3
-		cmp	\rx, #OMAP3UART4	@ only on 36xx
+		cmp	\rp, #OMAP3UART4	@ only on 36xx
 		beq	34f			@ configure OMAP3UART4
-		cmp	\rx, #OMAP4UART4	@ only on 44xx
+		cmp	\rp, #OMAP4UART4	@ only on 44xx
 		beq	44f			@ configure OMAP4UART4
-		cmp	\rx, #ZOOM_UART		@ only on zoom2/3
+		cmp	\rp, #ZOOM_UART		@ only on zoom2/3
 		beq	95f			@ configure ZOOM_UART
 
 		/* Configure the UART offset from the phys/virt base */
-21:		mov	\rx, #UART_OFFSET(OMAP2_UART1_BASE)	@ omap2/3/4
+21:		mov	\rp, #UART_OFFSET(OMAP2_UART1_BASE)	@ omap2/3/4
 		b	98f
-22:		mov	\rx, #UART_OFFSET(OMAP2_UART2_BASE)	@ omap2/3/4
+22:		mov	\rp, #UART_OFFSET(OMAP2_UART2_BASE)	@ omap2/3/4
 		b	98f
-23:		mov	\rx, #UART_OFFSET(OMAP2_UART3_BASE)
+23:		mov	\rp, #UART_OFFSET(OMAP2_UART3_BASE)
 		b	98f
-33:		mov	\rx, #UART_OFFSET(OMAP3_UART1_BASE)
-		add	\rx, \rx, #0x00fb0000
-		add	\rx, \rx, #0x00006000		@ OMAP3_UART3_BASE
+33:		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
+		add	\rp, \rp, #0x00fb0000
+		add	\rp, \rp, #0x00006000		@ OMAP3_UART3_BASE
 		b	98f
-34:		mov	\rx, #UART_OFFSET(OMAP3_UART1_BASE)
-		add	\rx, \rx, #0x00fb0000
-		add	\rx, \rx, #0x00028000		@ OMAP3_UART4_BASE
+34:		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
+		add	\rp, \rp, #0x00fb0000
+		add	\rp, \rp, #0x00028000		@ OMAP3_UART4_BASE
 		b	98f
-43:		mov	\rx, #UART_OFFSET(OMAP4_UART3_BASE)
+43:		mov	\rp, #UART_OFFSET(OMAP4_UART3_BASE)
 		b	98f
-44:		mov	\rx, #UART_OFFSET(OMAP4_UART4_BASE)
+44:		mov	\rp, #UART_OFFSET(OMAP4_UART4_BASE)
 		b	98f
-95:		ldr	\rx, =ZOOM_UART_BASE
-		mrc	p15, 0, \tmp, c1, c0
-		tst	\tmp, #1		@ MMU enabled?
-		ldreq	\tmp, =__virt_to_phys(omap_uart_phys)
-		ldrne	\tmp, =omap_uart_phys
-		str	\rx, [\tmp, #0]
-		ldr	\rx, =ZOOM_UART_VIRT
-		ldreq	\tmp, =__virt_to_phys(omap_uart_virt)
-		ldrne	\tmp, =omap_uart_virt
-		str	\rx, [\tmp, #0]
-		mov	\rx, #(UART_LSR << ZOOM_PORT_SHIFT)
-		ldreq	\tmp, =__virt_to_phys(omap_uart_lsr)
-		ldrne	\tmp, =omap_uart_lsr
-		str	\rx, [\tmp, #0]
+95:		ldr	\rp, =ZOOM_UART_BASE
+		mrc	p15, 0, \rv, c1, c0
+		tst	\rv, #1			@ MMU enabled?
+		ldreq	\rv, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldrne	\rv, =omap_uart_phys	@ MMU enabled
+		str	\rp, [\rv, #0]
+		ldr	\rp, =ZOOM_UART_VIRT
+		add	\rv, \rv, #4		@ omap_uart_virt
+		str	\rp, [\rv, #0]
+		mov	\rp, #(UART_LSR << ZOOM_PORT_SHIFT)
+		add	\rv, \rv, #4		@ omap_uart_lsr
+		str	\rp, [\rv, #0]
 		b	10b
 
 		/* Store both phys and virt address for the uart */
-98:		add	\rx, \rx, #0x48000000	@ phys base
-		mrc	p15, 0, \tmp, c1, c0
-		tst	\tmp, #1		@ MMU enabled?
-		ldreq	\tmp, =__virt_to_phys(omap_uart_phys)
-		ldrne	\tmp, =omap_uart_phys
-		str	\rx, [\tmp, #0]
-		sub	\rx, \rx, #0x48000000	@ phys base
-		add	\rx, \rx, #0xfa000000	@ virt base
-		ldreq	\tmp, =__virt_to_phys(omap_uart_virt)
-		ldrne	\tmp, =omap_uart_virt
-		str	\rx, [\tmp, #0]
-		mov	\rx, #(UART_LSR << OMAP_PORT_SHIFT)
-		ldreq	\tmp, =__virt_to_phys(omap_uart_lsr)
-		ldrne	\tmp, =omap_uart_lsr
-		str	\rx, [\tmp, #0]
+98:		add	\rp, \rp, #0x48000000	@ phys base
+		mrc	p15, 0, \rv, c1, c0
+		tst	\rv, #1			@ MMU enabled?
+		ldreq	\rv, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldrne	\rv, =omap_uart_phys	@ MMU enabled
+		str	\rp, [\rv, #0]
+		sub	\rp, \rp, #0x48000000	@ phys base
+		add	\rp, \rp, #0xfa000000	@ virt base
+		add	\rv, \rv, #4		@ omap_uart_virt
+		str	\rp, [\rv, #0]
+		mov	\rp, #(UART_LSR << OMAP_PORT_SHIFT)
+		add	\rv, \rv, #4		@ omap_uart_lsr
+		str	\rp, [\rv, #0]
 
 		b	10b
 99:
@@ -131,9 +130,9 @@ omap_uart_lsr:	.word	0
 
 		.macro	busyuart,rd,rx
 1001:		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1		@ MMU enabled?
-		ldreq	\rd, =__virt_to_phys(omap_uart_lsr)
-		ldrne	\rd, =omap_uart_lsr
+		tst	\rd, #1			@ MMU enabled?
+		ldreq	\rd, =__virt_to_phys(omap_uart_lsr)	@ MMU not enabled
+		ldrne	\rd, =omap_uart_lsr	@ MMU enabled
 		ldr	\rd, [\rd, #0]
 		ldrb	\rd, [\rx, \rd]
 		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index 91e0e39bb23f16..5e3bf5b68aecae 100644
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -10,12 +10,11 @@
 
 #include <mach/orion5x.h>
 
-	.macro  addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =ORION5X_REGS_PHYS_BASE
-	ldrne	\rx, =ORION5X_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro  addruart, rp, rv
+	ldr	\rp, =ORION5X_REGS_PHYS_BASE
+	ldr	\rv, =ORION5X_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 6ca8bd30bf46f3..931afebaf06439 100644
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,12 +11,10 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		mov	\rx, #0x00090000
-		addeq	\rx, \rx, #0x40000000
-		addne	\rx, \rx, #0xf4000000
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00090000
+		add	\rv, \rp, #0xf4000000	@ virtual
+		add	\rp, \rp, #0x40000000	@ physical
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 01cf81393fe2d5..7d5c75125d658c 100644
--- a/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -13,12 +13,10 @@
 
 #include "hardware.h"
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x40000000		@ physical
-		movne	\rx, #io_p2v(0x40000000)	@ virtual
-		orr	\rx, \rx, #0x00100000
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00100000
+		orr	\rv, \rp, #io_p2v(0x40000000)	@ virtual
+		orr	\rp, \rp, #0x40000000		@ physical
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 86622289b74e97..90b687cbe04ef2 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -33,12 +33,10 @@
 #error "Unknown RealView platform"
 #endif
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xfb000000	@ virtual base
-		orr	\rx, \rx, #DEBUG_LL_UART_OFFSET
+		.macro	addruart, rp, rv
+		mov	\rp, #DEBUG_LL_UART_OFFSET
+		orr	\rv, \rp, #0xfb000000	@ virtual base
+		orr	\rp, \rp, #0x10000000	@ physical base
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index 6fc8d66395dc37..85effffdc2b2a0 100644
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -11,13 +11,11 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x03000000
-		movne	\rx, #0xe0000000
-		orr	\rx, \rx, #0x00010000
-		orr	\rx, \rx, #0x00000fe0
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00010000
+		orr	\rp, \rp, #0x00000fe0
+		orr	\rv, \rp, #0xe0000000	@ virtual
+		orr	\rp, \rp, #0x03000000	@ physical
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 0eef78b4a6ed6f..5882deaa56bebc 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -19,13 +19,12 @@
 #define S3C2410_UART1_OFF (0x4000)
 #define SHIFT_2440TXF (14-9)
 
-	.macro addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C24XX_PA_UART
-		ldrne	\rx, = S3C24XX_VA_UART
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C24XX_PA_UART
+		ldr	\rv, = S3C24XX_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
index 239476b81f3b4f..0c5a73805560f6 100644
--- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
@@ -10,13 +10,12 @@
 #include <mach/map.h>
 #include <plat/regs-serial.h>
 
-	.macro addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C24XX_PA_UART
-		ldrne	\rx, = S3C24XX_VA_UART
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C24XX_PA_UART
+		ldr	\rv, = S3C24XX_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index f9ab5d26052a38..a29e70550c7084 100644
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -21,13 +21,12 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, rtmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C_PA_UART
+		ldr	\rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
index bb6536147ffb0b..e2213205d780bb 100644
--- a/arch/arm/mach-s5p6442/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
@@ -15,13 +15,12 @@
 #include <mach/map.h>
 #include <plat/regs-serial.h>
 
-	.macro addruart, rx, rtmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = S3C_VA_UART
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C_PA_UART
+		ldr	\rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index 70e02e91ee3c99..b2ba95ddf8e06a 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,13 +22,12 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, rtmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = S3C_VA_UART
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C_PA_UART
+		ldr	\rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
index 7872f5c3dfc242..169fe654a59eac 100644
--- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -21,13 +21,12 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = S3C_VA_UART
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C_PA_UART
+		ldr	\rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s5pv310/include/mach/debug-macro.S b/arch/arm/mach-s5pv310/include/mach/debug-macro.S
index 6fb3893486bec8..b0d920c474d3f4 100644
--- a/arch/arm/mach-s5pv310/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv310/include/mach/debug-macro.S
@@ -20,13 +20,12 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = S3C_VA_UART
+	.macro addruart, rp, rv
+		ldreq	\rp, = S3C_PA_UART
+		ldrne	\rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 336adccea54232..0cd0fc9635b6b3 100644
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,33 +12,37 @@
 */
 #include <mach/hardware.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000	@ physical base address
-		movne	\rx, #0xf8000000	@ virtual address
+		.macro	addruart, rp, rv
+		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		moveq	\rp, #0x80000000	@ physical base address
+		movne	\rp, #0xf8000000	@ virtual address
 
 		@ We probe for the active serial port here, coherently with
 		@ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
 		@ We assume r1 can be clobbered.
 
 		@ see if Ser3 is active
-		add	\rx, \rx, #0x00050000
-		ldr	r1, [\rx, #UTCR3]
-		tst	r1, #UTCR3_TXE
+		add	\rp, \rp, #0x00050000
+		ldr	\rv, [\rp, #UTCR3]
+		tst	\rv, #UTCR3_TXE
 
 		@ if Ser3 is inactive, then try Ser1
-		addeq	\rx, \rx, #(0x00010000 - 0x00050000)
-		ldreq	r1, [\rx, #UTCR3]
-		tsteq	r1, #UTCR3_TXE
+		addeq	\rp, \rp, #(0x00010000 - 0x00050000)
+		ldreq	\rv, [\rp, #UTCR3]
+		tsteq	\rv, #UTCR3_TXE
 
 		@ if Ser1 is inactive, then try Ser2
-		addeq	\rx, \rx, #(0x00030000 - 0x00010000)
-		ldreq	r1, [\rx, #UTCR3]
-		tsteq	r1, #UTCR3_TXE
+		addeq	\rp, \rp, #(0x00030000 - 0x00010000)
+		ldreq	\rv, [\rp, #UTCR3]
+		tsteq	\rv, #UTCR3_TXE
+
+		@ clear top bits, and generate both phys and virt addresses
+		lsl	\rp, \rp, #8
+		lsr	\rp, \rp, #8
+		orr	\rv, \rp, #0xf8000000	@ virtual
+		orr	\rp, \rp, #0x80000000	@ physical
 
-		@ if all ports are inactive, then there is nothing we can do
-		moveq	pc, lr
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 5ea24d4d1ba6e1..a473f55dc71fef 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -11,9 +11,10 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mov	\rx, #0xe0000000
-		orr	\rx, \rx, #0x000003f8
+		.macro	addruart, rp, rv
+		mov	\rp, #0xe0000000
+		orr	\rp, \rp, #0x000003f8
+		mov	\rv, \rp
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index 55a39564b43c47..8ea3bffb4e009f 100644
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -20,24 +20,28 @@
 
 #include <mach/io.h>
 
-	.macro  addruart,rx, tmp
-        mrc     p15, 0, \rx, c1, c0
-        tst     \rx, #1                 @ MMU enabled?
-        ldreq   \rx, =IO_APB_PHYS       @ physical
-        ldrne   \rx, =IO_APB_VIRT        @ virtual
+	.macro  addruart, rp, rv
+        ldreq   \rp, =IO_APB_PHYS       @ physical
+        ldrne   \rv, =IO_APB_VIRT        @ virtual
 #if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
 #error "A debug UART must be selected in the kernel config to use DEBUG_LL"
 #elif defined(CONFIG_TEGRA_DEBUG_UARTA)
-        orr     \rx, \rx, #0x6000
+        orr     \rp, \rp, #0x6000
+        orr     \rv, \rv, #0x6000
 #elif defined(CONFIG_TEGRA_DEBUG_UARTB)
-	ldr	\tmp, =0x6040
-        orr     \rx, \rx, \tmp
+        orr     \rp, \rp, #0x6000
+	orr	\rp, \rp, #0x40
+        orr     \rv, \rv, #0x6000
+	orr	\rv, \rv, #0x40
 #elif defined(CONFIG_TEGRA_DEBUG_UARTC)
-        orr     \rx, \rx, #0x6200
+        orr     \rp, \rp, #0x6200
+        orr     \rv, \rv, #0x6200
 #elif defined(CONFIG_TEGRA_DEBUG_UARTD)
-        orr     \rx, \rx, #0x6300
+        orr     \rp, \rp, #0x6300
+        orr     \rv, \rv, #0x6300
 #elif defined(CONFIG_TEGRA_DEBUG_UARTE)
-        orr     \rx, \rx, #0x6400
+        orr     \rp, \rp, #0x6400
+        orr     \rv, \rv, #0x6400
 #endif
 	.endm
 
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index 92c12420256ffd..df715707bead41 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,13 +10,12 @@
  */
 #include <mach/hardware.h>
 
-	.macro	addruart, rx, tmp
+	.macro	addruart, rp, rv
 	/* If we move the address using MMU, use this. */
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1			@ MMU enabled?
-	ldreq	\rx,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
-	ldrne	\rx,	  = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
-	orr	\rx, \rx, #0x00003000
+	ldr	\rp,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
+	ldr	\rv,	  = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
+	orr	\rp, \rp, #0x00003000
+	orr	\rv, \rv, #0x00003000
 	.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index c5203b7ea55215..be7c0f14e310ab 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -18,11 +18,9 @@
 #define UX500_UART(n)	__UX500_UART(n)
 #define UART_BASE	UX500_UART(CONFIG_UX500_DEBUG_UART)
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =UART_BASE				@ no, physical address
-	ldrne	\rx, =IO_ADDRESS(UART_BASE)		@ yes, virtual address
+	.macro	addruart, rp, rv
+	ldr	\rp, =UART_BASE				@ no, physical address
+	ldr	\rv, =IO_ADDRESS(UART_BASE)		@ yes, virtual address
 	.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index 6fea7199c62674..eb2cf7dc5c4410 100644
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -11,13 +11,11 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf1000000	@ virtual base
-		orr	\rx, \rx, #0x001F0000
-		orr	\rx, \rx, #0x00001000
+		.macro	addruart, rp, rv
+		mov	\rp,      #0x001F0000
+		orr	\rp, \rp, #0x00001000
+		orr	\rv, \rp, #0xf1000000	@ virtual base
+		orr	\rp, \rp,  #0x10000000	@ physical base
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S
index 5167e2aceeba9f..050d65e02a42a9 100644
--- a/arch/arm/mach-vexpress/include/mach/debug-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S
@@ -12,12 +12,10 @@
 
 #define DEBUG_LL_UART_OFFSET	0x00009000
 
-		.macro	addruart,rx,tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf8000000	@ virtual base
-		orr	\rx, \rx, #DEBUG_LL_UART_OFFSET
+		.macro	addruart,rp,rv
+		mov	\rp, #DEBUG_LL_UART_OFFSET
+		orr	\rv, \rp, #0xf8000000	@ virtual base
+		orr	\rp, \rp, #0x10000000	@ physical base
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 25606409aabcfb..d56213fb901ba1 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -62,11 +62,9 @@
 #define UART_PADDR	MXC91231_UART2_BASE_ADDR
 #define UART_VADDR	MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
 #endif
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =UART_PADDR	@ physical
-		ldrne	\rx, =UART_VADDR	@ virtual
+		.macro	addruart, rp, rv
+		ldr	\rp, =UART_PADDR	@ physical
+		ldr	\rv, =UART_VADDR	@ virtual
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 37fa593884ee64..e91270e4f64032 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -14,11 +14,9 @@
 #include <linux/amba/serial.h>
 #include <mach/spear.h>
 
-		.macro	addruart, rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1					@ MMU enabled?
-		moveq	\rx, #SPEAR_DBG_UART_BASE		@ Physical base
-		movne	\rx, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
+		.macro	addruart, rp, rv
+		mov	\rp, #SPEAR_DBG_UART_BASE		@ Physical base
+		mov	\rv, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
 		.endm
 
 		.macro	senduart, rd, rx
diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
index 1b9348bf0e4926..d3a0985c96817f 100644
--- a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
+++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
@@ -16,13 +16,10 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000	@ physical base address
-		addeq	\rx, \rx, #0x00070000
-		movne	\rx, #0xf0000000	@ virtual base
-		addne	\rx, \rx, #0x00070000
+		.macro	addruart, rp, rv
+		mov	\rp,      #0x00070000
+		add	\rv, \rp, #0xf0000000	@ virtual base
+		add	\rp, \rp, #0x80000000	@ physical base
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
index 97537845df64f3..7662f736e42be7 100644
--- a/arch/arm/plat-tcc/include/mach/debug-macro.S
+++ b/arch/arm/plat-tcc/include/mach/debug-macro.S
@@ -9,12 +9,11 @@
  *
  */
 
-		.macro	addruart,rx,tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x90000000	@ physical base address
-		movne	\rx, #0xF1000000	@ virtual base
-		orr	\rx, \rx, #0x00007000	@ UART0
+		.macro	addruart, rp, rv
+		moveq	\rp, #0x90000000	@ physical base address
+		movne	\rv, #0xF1000000	@ virtual base
+		orr	\rp, \rp, #0x00007000	@ UART0
+		orr	\rv, \rv, #0x00007000	@ UART0
 		.endm
 
 		.macro	senduart,rd,rx