| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Doc updates to clarify what an "unborn branch" means.
* jc/orphan-unborn:
orphan/unborn: fix use of 'orphan' in end-user facing messages
orphan/unborn: add to the glossary and use them consistently
|
|
"git checkout -B <branch> [<start-point>]", being a "forced" version
of "-b", switches to the <branch>, after optionally resetting its
tip to the <start-point>, even if the <branch> is in use in another
worktree, which is somewhat unexpected.
Protect the <branch> using the same logic that forbids "git checkout
<branch>" from touching a branch that is in use elsewhere.
This is a breaking change that may deserve backward compatibliity
warning in the Release Notes. The "--ignore-other-worktrees" option
can be used as an escape hatch if the finger memory of existing
users depend on the current behaviour of "-B".
Reported-by: Willem Verstraeten <willem.verstraeten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To orphan is a verb that denotes the act of getting on an unborn
branch, and a few references to "orphan branch" in our documentation
are misuses of the word. They caused end-user confusion, which was
made even worse because we did not have the term defined in the
glossary document. Add entries for "unborn" branch and "orphan"
operation to the glossary, and adjust existing documentation
accordingly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a CONFIGURATION section to the documentation of various built-ins,
for those cases where the relevant config/NAME.txt doesn't map only to
one git-NAME.txt. In particular:
* config/blame.txt: used by git-{blame,annotate}.txt. Since the
git-annotate(1) documentation refers to git-blame(1) don't add a
"CONFIGURATION" section to git-annotate(1), only to git-blame(1).
* config/checkout.txt: maps to both git-checkout.txt and
git-switch.txt (but nothing else).
* config/init.txt: should be included in git-init(1) and
git-clone(1).
* config/column.txt: We should ideally mention the relevant subset of
this in git-{branch,clean,status,tag}.txt, but let's punt on it for
now. We will when we eventually split these sort of files into
e.g. config/column.txt and
config/column/{branch,clean,status,tag}.txt, with the former
including the latter set.
Things that are being left out, and why:
* config/{remote,remotes,credential}.txt: Configuration that affects
how we talk to remote repositories is harder to untangle. We'll need
to include some of this in git-{fetch,remote,push,ls-remote}.txt
etc., but some of those only use a small subset of these
options. Let's leave this for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git -c branch.autosetupmerge=inherit branch new old" makes "new"
to have the same upstream as the "old" branch, instead of marking
"old" itself as its upstream.
* js/branch-track-inherit:
config: require lowercase for branch.*.autosetupmerge
branch: add flags and config to inherit tracking
branch: accept multiple upstream branches for tracking
|
|
It can be helpful when creating a new branch to use the existing
tracking configuration from the branch point. However, there is
currently not a method to automatically do so.
Teach git-{branch,checkout,switch} an "inherit" argument to the
"--track" option. When this is set, creating a new branch will cause the
tracking configuration to default to the configuration of the branch
point, if set.
For example, if branch "main" tracks "origin/main", and we run
`git checkout --track=inherit -b feature main`, then branch "feature"
will track "origin/main". Thus, `git status` will show us how far
ahead/behind we are from origin, and `git pull` will pull from origin.
This is particularly useful when creating branches across many
submodules, such as with `git submodule foreach ...` (or if running with
a patch such as [1], which we use at $job), as it avoids having to
manually set tracking info for each submodule.
Since we've added an argument to "--track", also add "--track=direct" as
another way to explicitly get the original "--track" behavior ("--track"
without an argument still works as well).
Finally, teach branch.autoSetupMerge a new "inherit" option. When this
is set, "--track=inherit" becomes the default behavior.
[1]: https://lore.kernel.org/git/20180927221603.148025-1-sbeller@google.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current behavior of git checkout/switch is that --guess is currently
enabled by default. However, some users may not wish for this to happen
automatically. Instead of forcing users to specify --no-guess manually
each time, teach these commands the checkout.guess configuration
variable that gives users the option to set a default behavior.
Teach the completion script to recognize the new config variable and
disable DWIM logic if it is set to false.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation refers to "initialized" or "populated" submodules,
to explain which submodules are affected by '--recurse-submodules', but
the real terminology here is 'active' submodules. Update the
documentation accordingly.
Some terminology:
- Active is defined in gitsubmodules(7), it only involves the
configuration variables 'submodule.active', 'submodule.<name>.active'
and 'submodule.<name>.url'. The function
submodule.c::is_submodule_active checks that a submodule is active.
- Populated means that the submodule's working tree is present (and the
gitfile correctly points to the submodule repository), i.e. either the
superproject was cloned with ` --recurse-submodules`, or the user ran
`git submodule update --init`, or `git submodule init [<path>]` and
`git submodule update [<path>]` separately which populated the
submodule working tree. This does not involve the 3 configuration
variables above.
- Initialized (at least in the context of the man pages involved in this
patch) means both "populated" and "active" as defined above, i.e. what
`git submodule update --init` does.
The --recurse-submodules option mostly affects active submodules. An
exception is `git fetch` where the option affects populated submodules.
As a consequence, in `git pull --recurse-submodules` the fetch affects
populated submodules, but the resulting working tree update only affects
active submodules.
In the documentation of `git-pull`, let's distinguish between the
fetching part which affects populated submodules, and the updating of
worktrees, which only affects active submodules.
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Helped-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also unify the formulation about --no-recurse-submodules for checkout
and switch, which we reuse for restore.
And correct the formulation about submodules' HEAD in read-tree, which
we reuse in reset.
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These two commands are basically redesigned git-checkout. We will not
have that many opportunities to redo (because we run out of verbs, and
that would also increase maintenance cost).
To play it safe, let's declare the two commands experimental in one or
two releases. If there is a serious flaw in the UI, we could still fix
it. If everything goes well and nobody complains loudly, we can remove
the experimental status by reverting this patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" doing too many things is a source of confusion for many
users (and it even bites old timers sometimes). To remedy that, the
command will be split into two new ones: switch and restore. The good
old "git checkout" command is still here and will be until all (or most
of users) are sick of it.
See the new man page for the final design of switch. The actual
implementation though is still pretty much the same as "git checkout"
and not completely aligned with the man page. Following patches will
adjust their behavior to match the man page.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
