| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When a series of patches for a topic-B depends on having topic-A,
the workflow to prepare the topic-B branch would look like this:
$ git checkout -b topic-B main
$ git merge --no-ff --no-edit topic-A
$ git am <mbox-for-topic-B
When topic-A gets updated, recreating the first merge and rebasing
the rest of the topic-B, all on detached HEAD, is a useful
technique. After updating topic-A with its new round of patches:
$ git checkout topic-B
$ prev=$(git rev-parse 'HEAD^{/^Merge branch .topic-A. into}')
$ git checkout --detach $prev^1
$ git merge --no-ff --no-edit topic-A
$ git rebase --onto HEAD $prev @{-1}^0
$ git checkout -B @{-1}
This will
(0) check out the current topic-B.
(1) find the previous merge of topic-A into topic-B.
(2) detach the HEAD to the parent of the previous merge.
(3) merge the updated topic-A to it.
(4) reapply the patches to rebuild the rest of topic-B.
(5) update topic-B with the result.
without contaminating the reflog of topic-B too much. topic-B@{1}
is the "logically previous" state before topic-A got updated, for
example. At (4), comparison (e.g. range-diff) between HEAD and
@{-1} is a meaningful way to sanity check the result, and the same
can be done at (5) by comparing topic-B and topic-B@{1}.
But there is one glitch. The merge into the detached HEAD done in
the step (3) above gives us "Merge branch 'topic-A' into HEAD", and
does not say "into topic-B".
Teach the "--into-name=<branch>" option to "git merge" and its
underlying "git fmt-merge-message", to pretend as if we were merging
into <branch>, no matter what branch we are actually merging into,
when they prepare the merge message. The pretend name honors the
usual "into <target>" suppression mechanism, which can be seen in
the tests added here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Note that this file is not directly included in config.txt but through
merge-config.txt and it's in "merge" section instead of a separate
"fmtMergeMsg" section like others.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When formatted as a man page, 1st section header is always in upper
case even if we write it otherwise. Make all 1st section headers
uppercase to keep it close to the final output.
This does affect html since case is kept there, but I still think it's
a good idea to maintain a consistent style for 1st section headers.
Some sections perhaps should become second sections instead, where
case is kept, and for better organization. I will update if anyone has
suggestions about this.
While at there I also make some header more consistent (e.g. examples
vs example) and fix a couple minor things here and there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use at least 4 delimiting dashes that are required for
ListingBlock to get this block rendered as verbatim text.
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The synopsys text and the usage string of subcommands that read list
of things from the standard input are often shown like this:
git gostak [--distim] < <list-of-doshes>
This is problematic in a number of ways:
* The way to use these commands is more often to feed them the
output from another command, not feed them from a file.
* Manual pages outside Git, commands that operate on the data read
from the standard input, e.g "sort", "grep", "sed", etc., are not
described with such a "< redirection-from-file" in their synopsys
text. Our doing so introduces inconsistency.
* We do not insist on where the output should go, by saying
git gostak [--distim] < <list-of-doshes> > <output>
* As it is our convention to enclose placeholders inside <braket>,
the redirection operator followed by a placeholder filename
becomes very hard to read, both in the documentation and in the
help text.
Let's clean them all up, after making sure that the documentation
clearly describes the modes that take information from the standard
input and what kind of things are expected on the input.
[jc: stole example for fmt-merge-msg from Jonathan]
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'merge.branchdesc' is only mentioned in the docs of 'git fmt-merge-msg'.
The description of 'merge.log' is already duplicated between
'merge-config.txt' and 'git-fmt-merge-msg.txt'; instead of duplicating the
description of another config variable, extract the descriptions of both
of these variables from 'git-fmt-merge-msg.txt' into a separate file and
include it there and in 'merge-config.txt'.
Leave 'merge.summary' only in git-fmt-merge-msg.txt, as it is marked
as deprecated.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
White-spaces, missing braces, standardize --[no-]foo.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was part of the "branch description" feature in the larger
"help people communicate better during their pull based workflow"
topic, but was never documented.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
|
|
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make 'merge.log' an integer or boolean option to set the number of
shortlog entries to display in the merge commit. Note that it defaults
to false, and that true means a default value of 20. Also update
corresponding documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the command-line '--log' option from a boolean option to an
integer option, and parse the optional integer provided on the
command-line into the 'shortlog_len' variable. Also update the
documentation accordingly.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reported-by: Yaroslav Halchenko <debian@onerussian.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since v1.7.1.1~23^2 (merge: --log appends shortlog to message if
specified, 2010-05-11), the fmt-merge-msg backend supports custom text
to override the merge title "Merge <foo> into <bar>".
Expose this functionality for scripted callers. Example:
git fmt-merge-msg --log -m \
"$(printf '%s\n' \
"Merge branch 'api-cleanup' into feature" \
'' \
'This is to use a few functions refactored for this purpose.'
)" <.git/FETCH_HEAD
Cc: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
The fmt-merge-message builtin can be invoked as "git fmt-merge-msg" rather
than through the hard link in GIT_EXEC_PATH. Although this is unlikely to
confuse most script writers, it should not hurt to make the documentation
a little clearer anyway.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old cox.net address is still getting mails from gitters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are new synonyms to the '--(no-)summary' option and the
'merge.summary' config variable, but are consistent with the soon to be
added 'merge --(no-)log' options. The 'merge.summary' config variable and
'--(no-)summary' options are still accepted, but are advertised to be
removed in the future.
'merge.log' takes precedence over 'merge.summary' if they are both set
inconsistently.
Update documentation and tests accordingly.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix minor typos throughout the documentation.
Signed-off-by: Brian Hetro <whee@smaertness.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Kestenholz <matthias@spinlock.ch>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Documentation/git-fmt-merge-msg.txt:
--summary to list commit summaries on merge
--no-summary
--file to take merged objects from a file.
Configuration option merge.summary
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Simple description. It appears to be mostly internal command, but hey, it
is (it seems) the only undocumented one, so let's fix it up...
Also add a note about it to git-merge documentation.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
