| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark-ups used in the documentation has been improved for
consistency.
* ja/doc-markup-fixes:
doc: git-clone: format placeholders
doc: git-clone: format verbatim words
doc: git-init: rework config item init.templateDir
doc: git-init: rework definition lists
doc: git-init: format placeholders
doc: git-init: format verbatim parts
|
|
With the new formatting rules, we use _<placeholders>_.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We also apply the formatting to urls.txt which is included.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a new `--ref-format` value flag for git-clone(1) that allows
the user to specify the ref format that is to be used for a newly
initialized repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
6f054f9fb3 (builtin/clone.c: disallow --local clones with
symlinks, 2022-07-28) gives a good error message when "git clone
--local" fails when the repo to clone has symlinks in
"$GIT_DIR/objects". In bffc762f87 (dir-iterator: prevent top-level
symlinks without FOLLOW_SYMLINKS, 2023-01-24), we later extended this
restriction to the case where "$GIT_DIR/objects" is itself a symlink,
but we didn't update the error message then - bffc762f87's tests show
that we print a generic "failed to start iterator over" message.
This is exacerbated by the fact that Documentation/git-clone.txt
mentions neither restriction, so users are left wondering if this is
intentional behavior or not.
Fix this by adding a check to builtin/clone.c: when doing a local clone,
perform an extra check to see if "$GIT_DIR/objects" is a symlink, and if
so, assume that that was the reason for the failure and report the
relevant information. Ideally, dir_iterator_begin() would tell us that
the real failure reason is the presence of the symlink, but (as far as I
can tell) there isn't an appropriate errno value for that.
Also, update Documentation/git-clone.txt to reflect that this
restriction exists.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Share the text used to explain configuration variables used by "git
<subcmd>" in "git help <subcmd>" with the text from "git help config".
* ab/dedup-config-and-command-docs:
docs: add CONFIGURATION sections that fuzzy map to built-ins
docs: add CONFIGURATION sections that map to a built-in
log docs: de-duplicate configuration sections
difftool docs: de-duplicate configuration sections
notes docs: de-duplicate and combine configuration sections
apply docs: de-duplicate configuration sections
send-email docs: de-duplicate configuration sections
grep docs: de-duplicate configuration sections
docs: add and use include template for config/* includes
|
|
Add a CONFIGURATION section to the documentation of various built-ins,
for those cases where the relevant config/NAME.txt doesn't map only to
one git-NAME.txt. In particular:
* config/blame.txt: used by git-{blame,annotate}.txt. Since the
git-annotate(1) documentation refers to git-blame(1) don't add a
"CONFIGURATION" section to git-annotate(1), only to git-blame(1).
* config/checkout.txt: maps to both git-checkout.txt and
git-switch.txt (but nothing else).
* config/init.txt: should be included in git-init(1) and
git-clone(1).
* config/column.txt: We should ideally mention the relevant subset of
this in git-{branch,clean,status,tag}.txt, but let's punt on it for
now. We will when we eventually split these sort of files into
e.g. config/column.txt and
config/column/{branch,clean,status,tag}.txt, with the former
including the latter set.
Things that are being left out, and why:
* config/{remote,remotes,credential}.txt: Configuration that affects
how we talk to remote repositories is harder to untangle. We'll need
to include some of this in git-{fetch,remote,push,ls-remote}.txt
etc., but some of those only use a small subset of these
options. Let's leave this for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a CONFIGURATION section to the documentation of various built-ins,
for those cases where the relevant config/NAME.txt describes
configuration that is only used by the relevant built-in documented in
git-NAME.txt. Subsequent commits will handle more complex cases.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A previous change added the '--bundle-uri' option, but did not check
if the --depth parameter was included. Since bundles are not compatible
with shallow clones, provide an error message to the user who is
attempting this combination.
I am leaving this as its own change, separate from the one that
implements '--bundle-uri', because this is more of an advisory for the
user. There is nothing wrong with bootstrapping with bundles and then
fetching a shallow clone. However, that is likely going to involve too
much work for the client _and_ the server. The client will download all
of this bundle information containing the full history of the
repository only to ignore most of it. The server will get a shallow
fetch request, but with a list of haves that might cause a more painful
computation of that shallow pack-file.
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Cloning a remote repository is one of the most expensive operations in
Git. The server can spend a lot of CPU time generating a pack-file for
the client's request. The amount of data can clog the network for a long
time, and the Git protocol is not resumable. For users with poor network
connections or are located far away from the origin server, this can be
especially painful.
Add a new '--bundle-uri' option to 'git clone' to bootstrap a clone from
a bundle. If the user is aware of a bundle server, then they can tell
Git to bootstrap the new repository with these bundles before fetching
the remaining objects from the origin server.
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cloning a repo with a --filter and with --recurse-submodules
enabled, the partial clone filter only applies to the top-level repo.
This can lead to unexpected bandwidth and disk usage for projects which
include large submodules. For example, a user might wish to make a
partial clone of Gerrit and would run:
`git clone --recurse-submodules --filter=blob:5k https://gerrit.googlesource.com/gerrit`.
However, only the superproject would be a partial clone; all the
submodules would have all blobs downloaded regardless of their size.
With this change, the same filter can also be applied to submodules,
meaning the expected bandwidth and disk savings apply consistently.
To avoid changing default behavior, add a new clone flag,
`--also-filter-submodules`. When this is set along with `--filter` and
`--recurse-submodules`, the filter spec is passed along to git-submodule
and git-submodule--helper, such that submodule clones also have the
filter applied.
This applies the same filter to the superproject and all submodules.
Users who need to customize the filter per-submodule would need to clone
with `--no-recurse-submodules` and then manually initialize each
submodule with the proper filter.
Applying filters to submodules should be safe thanks to Jonathan Tan's
recent work [1, 2, 3] eliminating the use of alternates as a method of
accessing submodule objects, so any submodule object access now triggers
a lazy fetch from the submodule's promisor remote if the accessed object
is missing. This patch is a reworked version of [4], which was created
prior to Jonathan Tan's work.
[1]: 8721e2e (Merge branch 'jt/partial-clone-submodule-1', 2021-07-16)
[2]: 11e5d0a (Merge branch 'jt/grep-wo-submodule-odb-as-alternate',
2021-09-20)
[3]: 162a13b (Merge branch 'jt/no-abuse-alternate-odb-for-submodules',
2021-10-25)
[4]: https://lore.kernel.org/git/52bf9d45b8e2b72ff32aa773f2415bf7b2b86da2.1563322192.git.steadmon@google.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "init" and "set" subcommands in "git sparse-checkout" have been
unified for a better user experience and performance.
* en/sparse-checkout-set:
sparse-checkout: remove stray trailing space
clone: avoid using deprecated `sparse-checkout init`
Documentation: clarify/correct a few sparsity related statements
git-sparse-checkout.txt: update to document init/set/reapply changes
sparse-checkout: enable reapply to take --[no-]{cone,sparse-index}
sparse-checkout: enable `set` to initialize sparse-checkout mode
sparse-checkout: split out code for tweaking settings config
sparse-checkout: disallow --no-stdin as an argument to set
sparse-checkout: add sanity-checks on initial sparsity state
sparse-checkout: break apart functions for sparse_checkout_(set|add)
sparse-checkout: pass use_stdin as a parameter instead of as a global
|
|
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to CodingGuidelines, multi-word placeholders should use
hyphens as word separators.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some scenarios, users may want more history than the repository
offered for cloning, which happens to be a shallow repository, can
give them. But because users don't know it is a shallow repository
until they download it to local, we may want to refuse to clone
this kind of repository, without creating any unnecessary files.
The '--depth=x' option cannot be used as a solution; the source may
be deep enough to give us 'x' commits when cloned, but the user may
later need to deepen the history to arbitrary depth.
Teach '--reject-shallow' option to "git clone" to abort as soon as
we find out that we are cloning from a shallow repository.
Signed-off-by: Li Linchao <lilinchao@oschina.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running 'git clone --local', the operation may fail if another
process is modifying the source repository. Document that this race
condition is known to hopefully help anyone who may run into it.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone" learned clone.defaultremotename configuration variable
to customize what nickname to use to call the remote the repository
was cloned from.
* sb/clone-origin:
clone: allow configurable default for `-o`/`--origin`
clone: read new remote name from remote_name instead of option_origin
clone: validate --origin option before use
refs: consolidate remote name validation
remote: add tests for add and rename with invalid names
clone: use more conventional config/option layering
clone: add tests for --template and some disallowed option pairs
|
|
While the default remote name of "origin" can be changed at clone-time
with `git clone`'s `--origin` option, it was previously not possible
to specify a default value for the name of that remote. Add support for
a new `clone.defaultRemoteName` config, with the newly-created remote
name resolved in priority order:
1. (Highest priority) A remote name passed directly to `git clone -o`
2. A `clone.defaultRemoteName=new_name` in config `git clone -c`
3. A `clone.defaultRemoteName` value set in `/path/to/template/config`,
where `--template=/path/to/template` is provided
4. A `clone.defaultRemoteName` value set in a non-template config file
5. The default value of `origin`
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Derrick Stolee <stolee@gmail.com>
Helped-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Sean Barag <sean@barag.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The run_auto_gc() method is used in several places to trigger a check
for repo maintenance after some Git commands, such as 'git commit' or
'git fetch'.
To allow for extra customization of this maintenance activity, replace
the 'git gc --auto [--quiet]' call with one to 'git maintenance run
--auto [--quiet]'. As we extend the maintenance builtin with other
steps, users will be able to select different maintenance activities.
Rename run_auto_gc() to run_auto_maintenance() to be clearer what is
happening on this call, and to expose all callers in the current diff.
Rewrite the method to use a struct child_process to simplify the calls
slightly.
Since 'git fetch' already allows disabling the 'git gc --auto'
subprocess, add an equivalent option with a different name to be more
descriptive of the new behavior: '--[no-]maintenance'. Update the
documentation to include these options at the same time.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There were a couple of instances in our manual pages that had an
opening diamond bracket without a corresponding closing one.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It turns out that the "--filter=<filter-spec>" option is not
documented anywhere in the "git clone" page, and instead is
detailed carefully in "git rev-list" where it serves a
different purpose.
Add a small bit about this option in the documentation. It
would be worth some time to create a subsection in the "git clone"
documentation about partial clone as a concept and how it can be
a surprising experience. For example, "git checkout" will likely
trigger a pack download.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc cleanup.
* ja/doc-markup-cleanup:
doc: indent multi-line items in list
doc: remove non pure ASCII characters
|
|
Non ASCII characters may be handled by publishing chains, but right
now, nothing indicates the encoding of files. Moreover, non ASCII
source strings upset the localization toolchain.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When someone wants to clone a large repository, but plans to work
using a sparse-checkout file, they either need to do a full
checkout first and then reduce the patterns they included, or
clone with --no-checkout, set up their patterns, and then run
a checkout manually. This requires knowing a lot about the repo
shape and how sparse-checkout works.
Add a new '--sparse' option to 'git clone' that initializes the
sparse-checkout file to include the following patterns:
/*
!/*/
These patterns include every file in the root directory, but
no directories. This allows a repo to include files like a
README or a bootstrapping script to grow enlistments from that
point.
During the 'git sparse-checkout init' call, we must first look
to see if HEAD is valid, since 'git clone' does not have a valid
HEAD at the point where it initializes the sparse-checkout. The
following checkout within the clone command will create the HEAD
ref and update the working directory correctly.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git clone" documentation refers to command line options in its
description in the short form; they have been replaced with long
forms to make them more recognisable.
* qn/clone-doc-use-long-form:
docs: git-clone: list short form of options first
docs: git-clone: refer to long form of options
|
|
List the short form of options (e.g.: '-l') before the long form (e.g.
'--local').
This is to match the doc of git-add, git-commit, git-clean, git-branch...
Signed-off-by: Quentin Nerden <quentin.nerden@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To make the doc of git-clone easier to read,
refer to the long form of the options
(it is easier to guess what '--verbose' is doing than '-v').
Signed-off-by: Quentin Nerden <quentin.nerden@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using `git clone --recurse-submodules` there was previously no way to
pass a `--remote` switch to the implicit `git submodule update` command for
any use case where you want the submodules to be checked out on their
remote-tracking branch rather than with the SHA-1 recorded in the superproject.
This patch rectifies this situation. It actually passes `--no-fetch` to
`git submodule update` as well on the grounds they the submodule has only just
been cloned, so fetching from the remote again only serves to slow things down.
Signed-off-by: Ben Avison <bavison@riscosopen.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 5e3548ef16 ("fetch: send server options when using protocol v2",
2018-04-24) taught "fetch" the ability to send server options when using
protocol v2, but not "clone". This ability is triggered by "-o" or
"--server-option".
Teach "clone" the same ability, except that because "clone" already
has "-o" for another parameter, teach "clone" only to receive
"--server-option".
Explain in the documentation, both for clone and for fetch, that server
handling of server options are server-specific. This is similar to
receive-pack's handling of push options - currently, they are just sent
to hooks to interpret as they see fit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Due to limitations in the current implementation, some configuration
variables specified via 'git clone -c var=val' (or 'git -c var=val
clone') are ignored during the initial fetch and checkout.
Let the users know which configuration variables are known to be
ignored ('remote.origin.mirror' and 'remote.origin.tagOpt') under the
documentation of 'git clone -c', along with hints to use the options
'--mirror' and '--no-tags' instead.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc formatting fix.
* nd/doc-header:
doc: keep first level section header in upper case
|
|
When formatted as a man page, 1st section header is always in upper
case even if we write it otherwise. Make all 1st section headers
uppercase to keep it close to the final output.
This does affect html since case is kept there, but I still think it's
a good idea to maintain a consistent style for 1st section headers.
Some sections perhaps should become second sections instead, where
case is kept, and for better organization. I will update if anyone has
suggestions about this.
While at there I also make some header more consistent (e.g. examples
vs example) and fix a couple minor things here and there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The description of the <repository> argument directs readers to "See the
URLS section below". When generating HTML this becomes a link to the
"GIT URLS" section. When reading the man page in a terminal, the
caption is slightly misleading. Use "GIT URLS" as the caption to avoid
any confusion.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There have been a few complaints on the mailing list that git-clone doesn't
respect the `submodule.recurse` setting, which every other command (that
potentially knows how to deal with submodules) respects. In case of clone
this is not beneficial to respect as the user may not want to obtain all
submodules (assuming a pathspec of '.').
Improve the documentation such that the pathspec is mentioned in the
synopsis to alleviate the confusion around the submodule recursion flag
in git-clone.
While at it clarify that the option can be given multiple times for complex
pathspecs.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a --no-tags option to clone without fetching any tags.
Without this change there's no easy way to clone a repository without
also fetching its tags.
When supplying --single-branch the primary remote branch will be
cloned, but in addition tags will be followed & retrieved. Now
--no-tags can be added --single-branch to clone a repository without
tags, and which only tracks a single upstream branch.
This option works without --single-branch as well, and will do a
normal clone but not fetch any tags.
Many git commands pay some fixed overhead as a function of the number
of references. E.g. creating ~40k tags in linux.git will cause a
command like `git log -1 >/dev/null` to run in over a second instead
of in a matter of milliseconds, in addition numerous other things will
slow down, e.g. "git log <TAB>" with the bash completion will slowly
show ~40k references instead of 1.
The user might want to avoid all of that overhead to simply use a
repository like that to browse the "master" branch, or something like
a CI tool might want to keep that one branch up-to-date without caring
about any other references.
Without this change the only way of accomplishing this was either by
manually tweaking the config in a fresh repository:
git init git &&
cat >git/.git/config <<EOF &&
[remote "origin"]
url = git@github.com:git/git.git
tagOpt = --no-tags
fetch = +refs/heads/master:refs/remotes/origin/master
[branch "master"]
remote = origin
merge = refs/heads/master
EOF
cd git &&
git pull
Which requires hardcoding the "master" name, which may not be the main
--single-branch would have retrieved, or alternatively by setting
tagOpt=--no-tags right after cloning & deleting any existing tags:
git clone --single-branch git@github.com:git/git.git &&
cd git &&
git config remote.origin.tagOpt --no-tags &&
git tag -l | xargs git tag -d
Which of course was also subtly buggy if --branch was pointed at a
tag, leaving the user in a detached head:
git clone --single-branch --branch v2.12.0 git@github.com:git/git.git &&
cd git &&
git config remote.origin.tagOpt --no-tags &&
git tag -l | xargs git tag -d
Now all this complexity becomes the much simpler:
git clone --single-branch --no-tags git@github.com:git/git.git
Or in the case of cloning a single tag "branch":
git clone --single-branch --branch v2.12.0 --no-tags git@github.com:git/git.git
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach clone --recurse-submodules to optionally take a pathspec argument
which describes which submodules should be recursively initialized and
cloned. If no pathspec is provided, --recurse-submodules will
recursively initialize and clone all submodules by using a default
pathspec of ".". In order to construct more complex pathspecs,
--recurse-submodules can be given multiple times.
This also configures the 'submodule.active' configuration option to be
the given pathspec, such that any future invocation of `git submodule
update` will keep up with the pathspec.
Additionally the switch '--recurse' is removed from the Documentation as
well as marked hidden in the options array, to streamline the options
for submodules. A simple '--recurse' doesn't convey what is being
recursed, e.g. it could mean directories or trees (c.f. ls-tree) In a
lot of other commands we already have '--recurse-submodules' to mean
recursing into submodules, so advertise this spelling here as the
genuine option.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing "git fetch --depth=<n>" option was hard to use
correctly when making the history of an existing shallow clone
deeper. A new option, "--deepen=<n>", has been added to make this
easier to use. "git clone" also learned "--shallow-since=<date>"
and "--shallow-exclude=<tag>" options to make it easier to specify
"I am interested only in the recent N months worth of history" and
"Give me only the history since that version".
* nd/shallow-deepen: (27 commits)
fetch, upload-pack: --deepen=N extends shallow boundary by N commits
upload-pack: add get_reachable_list()
upload-pack: split check_unreachable() in two, prep for get_reachable_list()
t5500, t5539: tests for shallow depth excluding a ref
clone: define shallow clone boundary with --shallow-exclude
fetch: define shallow boundary with --shallow-exclude
upload-pack: support define shallow boundary by excluding revisions
refs: add expand_ref()
t5500, t5539: tests for shallow depth since a specific date
clone: define shallow clone boundary based on time with --shallow-since
fetch: define shallow boundary with --shallow-since
upload-pack: add deepen-since to cut shallow repos based on time
shallow.c: implement a generic shallow boundary finder based on rev-list
fetch-pack: use a separate flag for fetch in deepening mode
fetch-pack.c: mark strings for translating
fetch-pack: use a common function for verbose printing
fetch-pack: use skip_prefix() instead of starts_with()
upload-pack: move rev-list code out of check_non_tip()
upload-pack: make check_non_tip() clean things up on error
upload-pack: tighten number parsing at "deepen" lines
...
|
|
In a later patch we want to try to create alternates for submodules,
but they might not exist in the referenced superproject. So add a way
to skip the non existing references and report them.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix an unintended regression in v2.9 that breaks "clone --depth"
that recurses down to submodules by forcing the submodules to also
be cloned shallowly, which many server instances that host upstream
of the submodules are not prepared for.
* sb/clone-shallow-passthru:
clone: do not let --depth imply --shallow-submodules
|
|
In v2.9.0, we prematurely flipped the default to force cloning
submodules shallowly, when the superproject is getting cloned
shallowly. This is likely to fail when the upstream repositories
submodules are cloned from a repository that is not prepared to
serve histories that ends at a commit that is not at the tip of a
branch, and we know the world is not yet ready.
Use a safer default to clone the submodules fully, unless the user
tells us that she knows that the upstream repository of the
submodules are willing to cooperate with "--shallow-submodules"
option.
Noticed-by: Vadim Eisenberg <VADIME@il.ibm.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone" learned "--shallow-submodules" option.
* sb/clone-shallow-passthru:
clone: add `--shallow-submodules` flag
|
|
When creating a shallow clone of a repository with submodules, the depth
argument does not influence the submodules, i.e. the submodules are done
as non-shallow clones. It is unclear what the best default is for the
depth of submodules of a shallow clone, so we need to have the possibility
to do all kinds of combinations:
* shallow super project with shallow submodules
e.g. build bots starting always from scratch. They want to transmit
the least amount of network data as well as using the least amount
of space on their hard drive.
* shallow super project with unshallow submodules
e.g. The superproject is just there to track a collection of repositories
and it is not important to have the relationship between the repositories
intact. However the history of the individual submodules matter.
* unshallow super project with shallow submodules
e.g. The superproject is the actual project and the submodule is a
library which is rarely touched.
The new switch to select submodules to be shallow or unshallow supports
all of these three cases.
It is easy to transition from the first to the second case by just
unshallowing the submodules (`git submodule foreach git fetch
--unshallow`), but it is not possible to transition from the second to the
first case (as we would have already transmitted the non shallow over
the network). That is why we want to make the first case the default in
case of a shallow super project. This leads to the inconvenience in the
second case with the shallow super project and unshallow submodules,
as you need to pass `--no-shallow-submodules`.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A major part of "git submodule update" has been ported to C to take
advantage of the recently added framework to run download tasks in
parallel.
* sb/submodule-parallel-update:
clone: allow an explicit argument for parallel submodule clones
submodule update: expose parallelism to the user
submodule helper: remove double 'fatal: ' prefix
git submodule update: have a dedicated helper for cloning
run_processes_parallel: rename parameters for the callbacks
run_processes_parallel: treat output of children as byte array
submodule update: direct error message to stderr
fetching submodules: respect `submodule.fetchJobs` config option
submodule-config: drop check against NULL
submodule-config: keep update strategy around
|
|
Just pass it along to "git submodule update", which may pick reasonable
defaults if you don't specify an explicit number.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It turns out "git clone" over rsync transport has been broken when
the source repository has packed references for a long time, and
nobody noticed nor complained about it.
* jk/drop-rsync-transport:
transport: drop support for git-over-rsync
|
|
The git-over-rsync protocol is inefficient and broken, and
has been for a long time. It transfers way more objects than
it needs (grabbing all of the remote's "objects/",
regardless of which objects we need). It does its own ad-hoc
parsing of loose and packed refs from the remote, but
doesn't properly override packed refs with loose ones,
leading to garbage results (e.g., expecting the other side
to have an object pointed to by a stale packed-refs entry,
or complaining that the other side has two copies of the
refs[1]).
This latter breakage means that nobody could have
successfully pulled from a moderately active repository
since cd547b4 (fetch/push: readd rsync support, 2007-10-01).
We never made an official deprecation notice in the release
notes for git's rsync protocol, but the tutorial has marked
it as such since 914328a (Update tutorial., 2005-08-30).
And on the mailing list as far back as Oct 2005, we can find
Junio mentioning it as having "been deprecated for quite
some time."[2,3,4]. So it was old news then; cogito had
deprecated the transport in July of 2005[5] (though it did
come back briefly when Linus broke git-http-pull!).
Of course some people professed their love of rsync through
2006, but Linus clarified in his usual gentle manner[6]:
> Thanks! This is why I still use rsync, even though
> everybody and their mother tells me "Linus says rsync is
> deprecated."
No. You're using rsync because you're actively doing
something _wrong_.
The deprecation sentiment was reinforced in 2008, with a
mention that cloning via rsync is broken (with no fix)[7].
Even the commit porting rsync over to C from shell (cd547b4)
lists it as deprecated! So between the 10 years of informal
warnings, and the fact that it has been severely broken
since 2007, it's probably safe to simply remove it without
further deprecation warnings.
[1] http://article.gmane.org/gmane.comp.version-control.git/285101
[2] http://article.gmane.org/gmane.comp.version-control.git/10093
[3] http://article.gmane.org/gmane.comp.version-control.git/17734
[4] http://article.gmane.org/gmane.comp.version-control.git/18911
[5] http://article.gmane.org/gmane.comp.version-control.git/5617
[6] http://article.gmane.org/gmane.comp.version-control.git/19354
[7] http://article.gmane.org/gmane.comp.version-control.git/103635
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation for "git fetch --depth" has been updated for clarity.
* ss/clone-depth-single-doc:
docs: clarify that --depth for git-fetch works with newly initialized repos
docs: say "commits" in the --depth option wording for git-clone
docs: clarify that passing --depth to git-clone implies --single-branch
|
|
It is not wrong to talk about "revisions" here, but in this context
revisions are always commits, and that is how we already name it in the
git-fetch docs. So align the docs by always referring to "commits".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is confusing to document how --depth behaves as part of the
--single-branch docs. Better move that part to the --depth docs, saying
that it implies --single-branch by default.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--reference" option is not the only way to provide a repository
to borrow objects from. A repository that borrows from another
repository can be cloned with "clone --local" and the resulting
repository will borrow from the same repository, which the user
may want to "--dissociate" from.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While use of the --reference option to borrow objects from an
existing local repository of the same project is an effective way to
reduce traffic when cloning a project over the network, it makes the
resulting "borrowing" repository dependent on the "borrowed"
repository. After running
git clone --reference=P $URL Q
the resulting repository Q will be broken if the borrowed repository
P disappears.
The way to allow the borrowed repository to be removed is to repack
the borrowing repository (i.e. run "git repack -a -d" in Q); while
power users may know it very well, it is not easily discoverable.
Teach a new "--dissociate" option to "git clone" to run this
repacking for the user.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Current text claims optimization, implying the use of
hardlinks, when this option ratchets down the level of
efficiency. This change explains the difference made by
using this option, namely copying instead of hardlinking,
and why it may be useful.
Signed-off-by: Albert L. Lash, IV <alash3@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various typofixes, all looked correct.
* ow/manpages-typofix:
Documentation: fix typos in man pages
|
|
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that git supports data transfer from or to a shallow clone, these
limitations are not true anymore.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit dacd2bcc414e0b7aac36aaa400da0a743c4741cc.
"It fails reliably without corrupting the receiving repository when
it should fail" may be better than the situation before the receiving
end was hardened recently, but the fact that sometimes the push does
not go through still remains. It is better to advice the users that
they cannot push from a shallow repository as a limitation before
they decide to use (or not to use) a shallow clone.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The document says one cannot push from a shallow clone. But that is
not true (maybe it was at some point in the past). The client does not
stop such a push nor does it give any indication to the receiver that
this is a shallow push. If the receiver accepts it, it's in.
Since 52fed6e (receive-pack: check connectivity before concluding "git
push" - 2011-09-02), receive-pack is prepared to deal with broken
push, a shallow push can't cause any corruption. Update the document
to reflect that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 3.x tree has been out for a while now. The -2.6 repository name
survived the initial release [1], but kernel.org now only lists
'linux.git' (for aegl as well as torvalds) [2].
[1]: http://article.gmane.org/gmane.linux.kernel/1147422
On 2011-05-30 01:47:57 GMT, Linus Torvalds wrote:
> ... yes, that means that my git tree is still called
> "linux-2.6.git" on kernel.org.
[2]: http://git.kernel.org/cgit/
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There may be times when using one of your local repositories as a
reference for a new clone make sense, but the implied version-bump in
the old example isn't one of them. I think a more intuitive example
is multi-user system with a central reference clone, and the new paths
hint at this use case.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are other examples in git-clone.txt demonstrating both '--bare'
and '-l -s'.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
White-spaces, missing braces, standardize --[no-]foo.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the earlier days, we used to spell the name of the system as GIT,
to simulate as if it were typeset with capital G and IT in small
caps. Later we stopped doing so at around 1.6.5 days.
Let's stop doing so throughout the documentation. The name to refer
to the whole system (and the concept it embodies) is "Git"; the
command end-users type is "git". And document this in the coding
guideline.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change was already done by 0e615b252f3 (Matthieu Moy, Tue Nov 2
2010, Replace "remote tracking" with "remote-tracking"), but new
instances of remote tracking (without dash) were introduced in the
meantime.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Jeff King <peff@peff.net>
|
|
A repository created with "git clone --single" had its fetch
refspecs set up just like a clone without "--single", leading the
subsequent "git fetch" to slurp all the other branches, defeating
the whole point of specifying "only this branch".
* rt/maint-clone-single:
clone --single: limit the fetch refspec to fetched branch
|
|
After running "git clone --single", the resulting repository has the
usual default "+refs/heads/*:refs/remotes/origin/*" wildcard fetch
refspec installed, which means that a subsequent "git fetch" will
end up grabbing all the other branches.
Update the fetch refspec to cover only the singly cloned ref instead
to correct this.
That means:
If "--single" is used without "--branch" or "--mirror", the
fetch refspec covers the branch on which remote's HEAD points to.
If "--single" is used with "--branch", it'll cover only the branch
specified in the "--branch" option.
If "--single" is combined with "--mirror", then it'll cover all
refs of the cloned repository.
If "--single" is used with "--branch" that specifies a tag, then
it'll cover only the ref for this tag.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is basically the same as using "file://", but is a
little less subtle for the end user. It also allows relative
paths to be specified.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --local flag is not "treat this like a local
repository", but rather "if we are local, turn on
optimizations". Therefore it does nothing in the case of:
git clone --local file:///path/to/repo
Let's make that more clear in the documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because a tag ref cannot be put to HEAD, HEAD will become detached.
This is consistent with "git checkout <tag>".
This is mostly useful in shallow clone, where it allows you to clone a
tag in addtion to branches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When --single-branch is given, only one branch, either HEAD or one
specified by --branch, will be fetched. Also only tags that point to
the downloaded history are fetched.
This helps most in shallow clones, where it can reduce the download to
minimum and that is why it is enabled by default when --depth is given.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clone does all of init, "remote add", fetch, and checkout
without giving the user a chance to intervene and set any
configuration. This patch allows you to set config options
in the newly created repository after the clone, but before
we do any other operations.
In many cases, this is a minor convenience over something
like:
git clone git://...
git config core.whatever true
But in some cases, it can bring extra efficiency by changing
how the fetch or checkout work. For example, setting
line-ending config before the checkout avoids having to
re-checkout all of the contents with the correct line
endings.
It also provides a mechanism for passing information to remote
helpers during a clone; the helpers may read the git config
to influence how they operate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
--separate-git-dir tells git to create git dir at the specified
location, instead of where it is supposed to be. A .git file that
points to that location will be put in place so that it appears normal
to repo discovery process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
|
|
* jl/clone-recurse-sm-synonym:
clone: Add the --recurse-submodules option as alias for --recursive
|
|
Since 1.6.5 "git clone" honors the --recursive option to recursively check
out submodules too. As this option can easily be misinterpreted when it is
added to other commands like "git grep", add the new --recurse-submodules
option as an alias for --recursive so the same option can be used for all
commands recursing into submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"remote branch" is a branch hosted in a remote repository, while
"remote-tracking branch" is a copy of such branch, hosted locally.
The distinction is subtle when the copy is up-to-date, but rather
fundamental to understand what "git fetch" and "git push" do.
This patch should fix all incorrect usages in Documentation/ directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some people in #linux-rt noticed that describing what "--mirror" option does
with "it mirrors" is way insufficient.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Darren 'Some People' Hart <darren@dvhart.com>
Cc: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Git 1.7.0.3
.mailmap: Map the the first submissions of MJG by e-mail
Documentation/git-clone: Transform description list into item list
Documentation/urls: Remove spurious example markers
Documentation/gitdiffcore: Remove misleading date in heading
Documentation/git-reflog: Fix formatting of command lists
|
|
* maint-1.6.6:
Documentation/git-clone: Transform description list into item list
Documentation/urls: Remove spurious example markers
Documentation/gitdiffcore: Remove misleading date in heading
Documentation/git-reflog: Fix formatting of command lists
|
|
so that the list of examples is formatted in the same way as for
git-fetch, and, more importantly, the different identation for the
code blocks in the examples (compared to the immediately preceding code
blocks from url.txt) doesn't look like misformatted, but is clarified by
the items' bullets.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tc/transport-verbosity:
transport: update flags to be in running order
fetch and pull: learn --progress
push: learn --progress
transport->progress: use flag authoritatively
clone: support multiple levels of verbosity
push: support multiple levels of verbosity
fetch: refactor verbosity option handling into transport.[ch]
Documentation/git-push: put --quiet before --verbose
Documentation/git-pull: put verbosity options before merge/fetch ones
Documentation/git-clone: mention progress in -v
Conflicts:
transport.h
|
|
* sd/init-template:
wrap-for-bin: do not export an empty GIT_TEMPLATE_DIR
t/t0001-init.sh: add test for 'init with init.templatedir set'
init: having keywords without value is not a global error.
Add a "TEMPLATE DIRECTORY" section to git-init[1].
Add `init.templatedir` configuration variable.
|
|
After 5a518ad (clone: use --progress to force progress reporting),
-v/--verbose did not affect whether progress status was reported to
stderr, and users accustomed to using -v to do so since 21188b1
(Implement git clone -v) may be confused.
Mitigate such risks by stating -v does not affect progress in the
documentation.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is misleading to say that we pull refs from $GIT_DIR/refs/*, because we
may also consult the packed refs mechanism. These days we tend to treat
the "refs hierarchy" as more of an abstract namespace that happens to be
represented as $GIT_DIR/refs. At best, this is a minor inaccuracy, but at
worst it can confuse users who then look in $GIT_DIR/refs and find that it
is missing some of the refs they expected to see.
This patch drops most uses of "$GIT_DIR/refs/*", changing them into just
"refs/*", under the assumption that users can handle the concept of an
abstract refs namespace. There are a few things to note:
- most cases just dropped the $GIT_DIR/ portion. But for cases where
that left _just_ the word "refs", I changed it to "refs/" to help
indicate that it was a hierarchy. I didn't do the same for longer
paths (e.g., "refs/heads" remained, instead of becoming
"refs/heads/").
- in some cases, no change was made, as the text was explicitly about
unpacked refs (e.g., the discussion in git-pack-refs).
- In some cases it made sense instead to note the existence of packed
refs (e.g., in check-ref-format and rev-parse).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a more inoformative section to describe template directory and
refer to it in config.txt and with the '--template' option of git-init
and git-clone commands.
Signed-off-by: Steven Drake <sdrake@xnet.co.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Follow the argument convention of git-pack-objects, such that a
separate option (--preogress) is used to force progress reporting
instead of -v/--verbose.
-v/--verbose now does not force progress reporting. Make git-clone.txt
say so.
This should cover all the bases in 21188b1 (Implement git clone -v),
which implemented the option to force progress reporting.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mention progress reporting behaviour in the descriptions for -q/
--quiet and -v/--verbose options, in the style of git-pack-objects.txt.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make transport code (viz. transport.c::fetch_refs_via_pack() and
transport-helper.c::standard_options()) that decides to show progress
check if stderr is a terminal, instead of stdout. After all, progress
reports (via the API in progress.[ch]) are sent to stderr.
Update the documentation for git-clone to say "standard error" as well.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document the --branch option as [-b <name>] in git clones synopsis.
Signed-off-by: David Soria Parra <dsp@php.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the missing definite article ("the") in several places.
Change "note to..." to "note for...", since "note to" means that
that the note is addressed to someone (source: Google search).
Change "progressbar" to "progress bar" (source: Wikipedia).
Format git commands, options, and file names consistently using
back quotes (i.e. a fixed font in the resulting HTML document).
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When saying the initial branch is equal to the currently active
remote branch, it is probably intended that the branch heads
point to the same commit. Maybe it would be more useful to a
new user to emphasize that the tree contents and history are the
same.
More important, probably, is that this new branch is set up so
that "git pull" merges changes from the corresponding remote
branch. The next paragraph addresses that directly. What the
reader needs to know to begin with is that (1) the initial branch
is your own; if you do not pull, it won't get updated, and that
(2) the initial branch starts out at the same commit as the
upstream.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Gilger <heipei@hackvalue.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/clone-b:
clone: add --branch option to select a different HEAD
|
|
* maint:
git-clone: add missing comma in --reference documentation
|
|
* maint-1.6.3:
git-clone: add missing comma in --reference documentation
git-cvsserver: no longer use deprecated 'git-subcommand' commands
clone: disconnect transport after fetching
|
|
* maint-1.6.2:
git-clone: add missing comma in --reference documentation
clone: disconnect transport after fetching
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jh/submodule-foreach:
git clone: Add --recursive to automatically checkout (nested) submodules
t7407: Use 'rev-parse --short' rather than bash's substring expansion notation
git submodule status: Add --recursive to recurse into nested submodules
git submodule update: Introduce --recursive to update nested submodules
git submodule foreach: Add --recursive to recurse into nested submodules
git submodule foreach: test access to submodule name as '$name'
Add selftest for 'git submodule foreach'
git submodule: Cleanup usage string and add option parsing to cmd_foreach()
git submodule foreach: Provide access to submodule name, as '$name'
Conflicts:
Documentation/git-submodule.txt
git-submodule.sh
|
|
We currently point the HEAD of a newly cloned repo to the
same ref as the parent repo's HEAD. While a user can then
"git checkout -b foo origin/foo" whichever branch they
choose, it is more convenient and more efficient to tell
clone which branch you want in the first place.
Based on a patch by Kirill A. Korinskiy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many projects using submodules expect all submodules to be checked out
in order to build/work correctly. A common command sequence for
developers on such projects is:
git clone url/to/project
cd project
git submodule update --init (--recursive)
This patch introduces the --recursive option to git-clone. The new
option causes git-clone to recursively clone and checkout all
submodules of the cloned project. Hence, the above command sequence
can be reduced to:
git clone --recursive url/to/project
--recursive is ignored if no checkout is done by the git-clone.
The patch also includes documentation and a selftest.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The effects of repacking on a repository with alternates are a bit
subtle. The two main things users will want are:
1. Not to waste disk space by accidentally copying objects which could
be shared.
2. Copying all objects explicitly to break the dependency on the source
repo.
This patch describes both under the "clone -s" documentation. It makes
sense to put it there rather than in git-repack.txt for both cases.
For (1), we are warning the user who is using "clone -s" about what _not_
to do, so we need to get their attention when reading about "clone -s".
For (2), we are telling them how git-repack can be used to accomplish a
task, but until they know that git-repack is the right tool, they have no
reason to look at the repack documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Cloning into an existing empty directory is now allowed:
commit 55892d23981917aefdb387ad7d0429f90cbd446a
("Allow cloning to an existing empty directory")
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.6.0:
Documentation: Remove an odd "instead"
|
|
Signed-off-by: Holger Weiß <holger@zedat.fu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new -v option forces the progressbar, even in case the output
is not a terminal. This can be useful if the caller is an IDE or
wrapper which wants to scrape the progressbar from stderr and show
its information in a different format.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The command line
$ git clone --mirror $URL
is now a short-hand for
$ git clone --bare $URL
$ (cd $(basename $URL) && git remote add --mirror origin $URL)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone" no longer calls "git-fetch-pack", so the documentation is a bit
stale. Instead, state that the -u option is to be used when accessing a
repository over ssh.
Signed-off-by: Steve Haslam <shaslam@lastminute.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since git-gc now always calls prune, even with --auto, unreferenced objects
may be removed by more operations than just git-gc. This is important for
clones created using --shared or --reference.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It should be loud and clear.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is a scenario when using git clone -s and git gc --prune togother is
dangerous. Document this.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
|
|
Avoid abbreviation 'revs', improve the language a bit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we're counting, a smaller number is 'fewer' not 'less'
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This changes the behaviour of cloning from a repository on the
local machine, by defaulting to "-l" (use hardlinks to share
files under .git/objects) and making "-l" a no-op. A new
option, --no-hardlinks, is also added to cause file-level copy
of files under .git/objects while still avoiding the normal
"pack to pipe, then receive and index pack" network transfer
overhead. The old behaviour of local cloning without -l nor -s
is availble by specifying the source repository with the newly
introduced file:///path/to/repo.git/ syntax (i.e. "same as
network" cloning).
* With --no-hardlinks (i.e. have all .git/objects/ copied via
cpio) would not catch the source repository corruption, and
also risks corrupted recipient repository if an
alpha-particle hits memory cell while indexing and resolving
deltas. As long as the recipient is created uncorrupted, you
have a good back-up.
* same-as-network is expensive, but it would catch the breakage
of the source repository. It still risks corrupted recipient
repository due to hardware failure. As long as the recipient
is created uncorrupted, you have a good back-up.
* The new default on the same filesystem, as long as the source
repository is healthy, it is very likely that the recipient
would be, too. Also it is very cheap. You do not get any
back-up benefit, though.
None of the method is resilient against the source repository
corruption, so let's discount that from the comparison. Then
the difference with and without --no-hardlinks matters primarily
if you value the back-up benefit or not. If you want to use the
cloned repository as a back-up, then it is cheaper to do a clone
with --no-hardlinks and two git-fsck (source before clone,
recipient after clone) than same-as-network clone, especially as
you are likely to do a git-fsck on the recipient if you are so
paranoid anyway.
Which leads me to believe that being able to use file:/// is
probably a good idea, if only for testability, but probably of
little practical value. We default to hardlinked clone for
everyday use, and paranoids can use --no-hardlinks as a way to
make a back-up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document that '--message=<msg>' is long version of '-m <msg>' in
git-commit, and that '--no-checkout' is long version of '-n' in
git-clone.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since git-clone is one of the many commands taking
URLs to remote repositories as an argument, it should include
the URL-types list from urls.txt.
Split up urls.txt into urls.txt and urls-remotes.txt. The latter
should be used by anything besides git-clone where a discussion of
using .git/config and .git/remotes/ to name URLs just doesn't make
as much sense.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Make command description imperative statement, not third-person present.
|
|
In several of the text messages, the tense of the verb is inconsistent.
For example, "Add" vs "Creates". It is customary to use imperative for
command description.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
path in example was missing '../'
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Documentation advertises the new `--depth <n>' parameter with an equal
sign, while the usage notes (shown after `git-clone --help') do not. If I
understood git-clone's source code correctly, the version without the
equal sign is correct, which is why this patch syncs documentation to the
usage note.
Signed-off-by: Christian Schlotter <schlotter@users.sourceforge.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Also reorders a handful entries to make each list sorted
alphabetically.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If a branch other than "master" is checked out in the origin repository,
git-clone makes a local copy of that branch rather than the origin's
"master"
branch. This patch describes the actual behavior.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Fix a couple remaining references to the origin branch.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Finally.
The separate-remote layout is so much more organized than
traditional and easier to work with especially when you need to
deal with remote repositories with multiple branches and/or you
need to deal with more than one remote repositories, and using
traditional layout for new repositories simply does not make
much sense.
Internally we still have code for 1:1 mappings to create a bare
clone; that is a good thing and will not go away.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When --use-separate-remote is used on git-clone, the remote
heads are saved under $GIT_DIR/refs/remotes/origin/, not
"$GIT_DIR/remotes/origin/"
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Update git-clone man page to reflect recent changes
(--use-separate-remote default and use of .git/config instead of
remotes files), and rewrite introduction.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
With making --use-separate-remote default when creating non-bare
clone, there was need for the flag which would turn off this behavior.
It was called --use-immingled-remote.
Immingle means to blend, to combine into one, to intermingle, but it
is a bit obscure word. I think it would be better to use simply
--no-separate-remote as the opposite to --use-separate-remote
option to git clone.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We've talked about this for quite some time on the list, and it
is a sane thing to do for a repository with an associcated
working tree.
For somebody who wants to use the traditional layout, there is a
backward compatibility option --use-immingled-remote, but it is
expected to be removed before the next major release.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The program is not used by git-clone since git-fetch-pack was extended
to allow its caller do what git-clone-pack alone did, and git-clone was
updated to use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Horst H. von Brand <vonbrand@inf.utfsm.cl>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Uwe Zeisberger <uzeisberger@io.fsforth.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Move incorrect asciidoc level 2 titles back to level 1.
Show output of git-name-rev in man page example.
Reword sentences that begin with a period (.) in asciidoc
numbered lists to work around conversion to man page bug.
Mention that git-repack now calls git-prune-packed
when the -d option is passed to it.
[imap] section headers in the config file example need to be
contained in a literal block. imap.pass is the proper config
file variable to use, not imap.password.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The new --reference flag introduced to git-clone in
GIT 1.3.0 was not documented but is rather handy.
So document it.
Also corrected a minor issue with the documentation for the
-s flag; the info/alternates file name was spelled wrong.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It is simply pointless, since no merges will ever happen in such
a repository.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The new option --naked is to help creating a naked repository
for public consumption.
$ git clone -l -s --naked \
/pub/scm/.../torvalds/linux-2.6.git subproj-2.6.git
is equivalent to this sequence:
$ git clone -l -s -n /pub/scm/.../torvalds/linux-2.6.git temp
$ mv temp/.git subproj-2.6.git
$ rmdir temp
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In addition, also fixes a few synopses to be more consistent and a gitlink.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Earlier, git-clone stored upstream's master in the branch named 'origin',
possibly overwriting an existing such branch.
Now you can change it by calling git-clone with '-o <other_name>'.
[jc: added ref format check, subdirectory safety, documentation
and usage string.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
With this patch the following commands all clone into the local directory
"repo". If repo exists, it will still barf.
git-clone git://host.xz/repo.git
git-clone /path/to/repo/.git
git-clone host.xz:repo.git
I ended up doing the same source-to-target sed'ing for all our company
projects, so it was easier to add it directly to git-clone.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This implements the idea Daniel Barkalow came up with, to match
the remotes/origin created by clone by default to the workflow I
use myself in my guinea pig repository, to have me eat my own
dog food.
We probably would want to use either .git/refs/local/heads/*
(idea by Linus) or .git/refs/heads/origin/* instead to reduce
the local ref namespace pollution.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Josef Weidendorfer points out that git-clone documentation does not
mention the initial copying of remote branch heads into corresponding
local branches. Also clarify the purpose of the ref mappings description
in the "remotes" file and recommended workflow.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The synopsis of the manpages should use the hyphenated version of the git
commands. Adapt the remaining offenders.
Signed-off-by: Christian Meder <chris@absolutegiganten.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Christian Meder <chris@absolutegiganten.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The documentation for git-clone is behind the actual command.
I have been getting tired of reading the shell script to see
what the arguments are so here is an update of the actual documentation.
Signed-off-by: Eric Biederman <ebiederman@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
