Merge branch 'nd/config-split'

Split Documentation/config.txt for easier maintenance.

* nd/config-split:
  config.txt: move submodule part out to a separate file
  config.txt: move sequence.editor out of "core" part
  config.txt: move sendemail part out to a separate file
  config.txt: move receive part out to a separate file
  config.txt: move push part out to a separate file
  config.txt: move pull part out to a separate file
  config.txt: move gui part out to a separate file
  config.txt: move gitcvs part out to a separate file
  config.txt: move format part out to a separate file
  config.txt: move fetch part out to a separate file
  config.txt: follow camelCase naming

1 files changed, 18 insertions, 702 deletions

diff --git a/Documentation/config.txt b/Documentation/config.txt
index ad0f4510c3..fa52b19dff 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -832,12 +832,6 @@ core.packedRefsTimeout::
 	all; -1 means to try indefinitely. Default is 1000 (i.e.,
 	retry for 1 second).
 
-sequence.editor::
-	Text editor used by `git rebase -i` for editing the rebase instruction file.
-	The value is meant to be interpreted by the shell when it is used.
-	It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable.
-	When not configured the default commit message editor is used instead.
-
 core.pager::
 	Text viewer for use by Git commands (e.g., 'less').  The value
 	is meant to be interpreted by the shell.  The order of preference
@@ -1520,159 +1514,9 @@ fastimport.unpackLimit::
 	operation complete faster, especially on slow filesystems.  If
 	not set, the value of `transfer.unpackLimit` is used instead.
 
-fetch.recurseSubmodules::
-	This option can be either set to a boolean value or to 'on-demand'.
-	Setting it to a boolean changes the behavior of fetch and pull to
-	unconditionally recurse into submodules when set to true or to not
-	recurse at all when set to false. When set to 'on-demand' (the default
-	value), fetch and pull will only recurse into a populated submodule
-	when its superproject retrieves a commit that updates the submodule's
-	reference.
-
-fetch.fsckObjects::
-	If it is set to true, git-fetch-pack will check all fetched
-	objects. See `transfer.fsckObjects` for what's
-	checked. Defaults to false. If not set, the value of
-	`transfer.fsckObjects` is used instead.
-
-fetch.fsck.<msg-id>::
-	Acts like `fsck.<msg-id>`, but is used by
-	linkgit:git-fetch-pack[1] instead of linkgit:git-fsck[1]. See
-	the `fsck.<msg-id>` documentation for details.
-
-fetch.fsck.skipList::
-	Acts like `fsck.skipList`, but is used by
-	linkgit:git-fetch-pack[1] instead of linkgit:git-fsck[1]. See
-	the `fsck.skipList` documentation for details.
-
-fetch.unpackLimit::
-	If the number of objects fetched over the Git native
-	transfer is below this
-	limit, then the objects will be unpacked into loose object
-	files. However if the number of received objects equals or
-	exceeds this limit then the received pack will be stored as
-	a pack, after adding any missing delta bases.  Storing the
-	pack from a push can make the push operation complete faster,
-	especially on slow filesystems.  If not set, the value of
-	`transfer.unpackLimit` is used instead.
-
-fetch.prune::
-	If true, fetch will automatically behave as if the `--prune`
-	option was given on the command line.  See also `remote.<name>.prune`
-	and the PRUNING section of linkgit:git-fetch[1].
-
-fetch.pruneTags::
-	If true, fetch will automatically behave as if the
-	`refs/tags/*:refs/tags/*` refspec was provided when pruning,
-	if not set already. This allows for setting both this option
-	and `fetch.prune` to maintain a 1=1 mapping to upstream
-	refs. See also `remote.<name>.pruneTags` and the PRUNING
-	section of linkgit:git-fetch[1].
-
-fetch.output::
-	Control how ref update status is printed. Valid values are
-	`full` and `compact`. Default value is `full`. See section
-	OUTPUT in linkgit:git-fetch[1] for detail.
-
-fetch.negotiationAlgorithm::
-	Control how information about the commits in the local repository is
-	sent when negotiating the contents of the packfile to be sent by the
-	server. Set to "skipping" to use an algorithm that skips commits in an
-	effort to converge faster, but may result in a larger-than-necessary
-	packfile; The default is "default" which instructs Git to use the default algorithm
-	that never skips commits (unless the server has acknowledged it or one
-	of its descendants).
-	Unknown values will cause 'git fetch' to error out.
-+
-See also the `--negotiation-tip` option for linkgit:git-fetch[1].
-
-format.attach::
-	Enable multipart/mixed attachments as the default for
-	'format-patch'.  The value can also be a double quoted string
-	which will enable attachments as the default and set the
-	value as the boundary.  See the --attach option in
-	linkgit:git-format-patch[1].
-
-format.from::
-	Provides the default value for the `--from` option to format-patch.
-	Accepts a boolean value, or a name and email address.  If false,
-	format-patch defaults to `--no-from`, using commit authors directly in
-	the "From:" field of patch mails.  If true, format-patch defaults to
-	`--from`, using your committer identity in the "From:" field of patch
-	mails and including a "From:" field in the body of the patch mail if
-	different.  If set to a non-boolean value, format-patch uses that
-	value instead of your committer identity.  Defaults to false.
-
-format.numbered::
-	A boolean which can enable or disable sequence numbers in patch
-	subjects.  It defaults to "auto" which enables it only if there
-	is more than one patch.  It can be enabled or disabled for all
-	messages by setting it to "true" or "false".  See --numbered
-	option in linkgit:git-format-patch[1].
-
-format.headers::
-	Additional email headers to include in a patch to be submitted
-	by mail.  See linkgit:git-format-patch[1].
-
-format.to::
-format.cc::
-	Additional recipients to include in a patch to be submitted
-	by mail.  See the --to and --cc options in
-	linkgit:git-format-patch[1].
-
-format.subjectPrefix::
-	The default for format-patch is to output files with the '[PATCH]'
-	subject prefix. Use this variable to change that prefix.
-
-format.signature::
-	The default for format-patch is to output a signature containing
-	the Git version number. Use this variable to change that default.
-	Set this variable to the empty string ("") to suppress
-	signature generation.
-
-format.signatureFile::
-	Works just like format.signature except the contents of the
-	file specified by this variable will be used as the signature.
-
-format.suffix::
-	The default for format-patch is to output files with the suffix
-	`.patch`. Use this variable to change that suffix (make sure to
-	include the dot if you want it).
-
-format.pretty::
-	The default pretty format for log/show/whatchanged command,
-	See linkgit:git-log[1], linkgit:git-show[1],
-	linkgit:git-whatchanged[1].
-
-format.thread::
-	The default threading style for 'git format-patch'.  Can be
-	a boolean value, or `shallow` or `deep`.  `shallow` threading
-	makes every mail a reply to the head of the series,
-	where the head is chosen from the cover letter, the
-	`--in-reply-to`, and the first patch mail, in this order.
-	`deep` threading makes every mail a reply to the previous one.
-	A true boolean value is the same as `shallow`, and a false
-	value disables threading.
-
-format.signOff::
-	A boolean value which lets you enable the `-s/--signoff` option of
-	format-patch by default. *Note:* Adding the Signed-off-by: line to a
-	patch should be a conscious act and means that you certify you have
-	the rights to submit this work under the same open source license.
-	Please see the 'SubmittingPatches' document for further discussion.
-
-format.coverLetter::
-	A boolean that controls whether to generate a cover-letter when
-	format-patch is invoked, but in addition can be set to "auto", to
-	generate a cover-letter only when there's more than one patch.
-
-format.outputDirectory::
-	Set a custom directory to store the resulting files instead of the
-	current working directory.
-
-format.useAutoBase::
-	A boolean value which lets you enable the `--base=auto` option of
-	format-patch by default.
+include::fetch-config.txt[]
+
+include::format-config.txt[]
 
 filter.<driver>.clean::
 	The command which is used to convert the content of a worktree
@@ -1847,73 +1691,7 @@ gc.rerereUnresolved::
 	You can also use more human-readable "1.month.ago", etc.
 	The default is 15 days.  See linkgit:git-rerere[1].
 
-gitcvs.commitMsgAnnotation::
-	Append this string to each commit message. Set to empty string
-	to disable this feature. Defaults to "via git-CVS emulator".
-
-gitcvs.enabled::
-	Whether the CVS server interface is enabled for this repository.
-	See linkgit:git-cvsserver[1].
-
-gitcvs.logFile::
-	Path to a log file where the CVS server interface well... logs
-	various stuff. See linkgit:git-cvsserver[1].
-
-gitcvs.usecrlfattr::
-	If true, the server will look up the end-of-line conversion
-	attributes for files to determine the `-k` modes to use. If
-	the attributes force Git to treat a file as text,
-	the `-k` mode will be left blank so CVS clients will
-	treat it as text. If they suppress text conversion, the file
-	will be set with '-kb' mode, which suppresses any newline munging
-	the client might otherwise do. If the attributes do not allow
-	the file type to be determined, then `gitcvs.allBinary` is
-	used. See linkgit:gitattributes[5].
-
-gitcvs.allBinary::
-	This is used if `gitcvs.usecrlfattr` does not resolve
-	the correct '-kb' mode to use. If true, all
-	unresolved files are sent to the client in
-	mode '-kb'. This causes the client to treat them
-	as binary files, which suppresses any newline munging it
-	otherwise might do. Alternatively, if it is set to "guess",
-	then the contents of the file are examined to decide if
-	it is binary, similar to `core.autocrlf`.
-
-gitcvs.dbName::
-	Database used by git-cvsserver to cache revision information
-	derived from the Git repository. The exact meaning depends on the
-	used database driver, for SQLite (which is the default driver) this
-	is a filename. Supports variable substitution (see
-	linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`).
-	Default: '%Ggitcvs.%m.sqlite'
-
-gitcvs.dbDriver::
-	Used Perl DBI driver. You can specify any available driver
-	for this here, but it might not work. git-cvsserver is tested
-	with 'DBD::SQLite', reported to work with 'DBD::Pg', and
-	reported *not* to work with 'DBD::mysql'. Experimental feature.
-	May not contain double colons (`:`). Default: 'SQLite'.
-	See linkgit:git-cvsserver[1].
-
-gitcvs.dbUser, gitcvs.dbPass::
-	Database user and password. Only useful if setting `gitcvs.dbDriver`,
-	since SQLite has no concept of database users and/or passwords.
-	'gitcvs.dbUser' supports variable substitution (see
-	linkgit:git-cvsserver[1] for details).
-
-gitcvs.dbTableNamePrefix::
-	Database table name prefix.  Prepended to the names of any
-	database tables used, allowing a single database to be used
-	for several repositories.  Supports variable substitution (see
-	linkgit:git-cvsserver[1] for details).  Any non-alphabetic
-	characters will be replaced with underscores.
-
-All gitcvs variables except for `gitcvs.usecrlfattr` and
-`gitcvs.allBinary` can also be specified as
-'gitcvs.<access_method>.<varname>' (where 'access_method'
-is one of "ext" and "pserver") to make them apply only for the given
-access method.
+include::gitcvs-config.txt[]
 
 gitweb.category::
 gitweb.description::
@@ -1978,63 +1756,7 @@ gpg.<format>.program::
 	be used as a legacy synonym for	`gpg.openpgp.program`. The default
 	value for `gpg.x509.program` is "gpgsm".
 
-gui.commitMsgWidth::
-	Defines how wide the commit message window is in the
-	linkgit:git-gui[1]. "75" is the default.
-
-gui.diffContext::
-	Specifies how many context lines should be used in calls to diff
-	made by the linkgit:git-gui[1]. The default is "5".
-
-gui.displayUntracked::
-	Determines if linkgit:git-gui[1] shows untracked files
-	in the file list. The default is "true".
-
-gui.encoding::
-	Specifies the default encoding to use for displaying of
-	file contents in linkgit:git-gui[1] and linkgit:gitk[1].
-	It can be overridden by setting the 'encoding' attribute
-	for relevant files (see linkgit:gitattributes[5]).
-	If this option is not set, the tools default to the
-	locale encoding.
-
-gui.matchTrackingBranch::
-	Determines if new branches created with linkgit:git-gui[1] should
-	default to tracking remote branches with matching names or
-	not. Default: "false".
-
-gui.newBranchTemplate::
-	Is used as suggested name when creating new branches using the
-	linkgit:git-gui[1].
-
-gui.pruneDuringFetch::
-	"true" if linkgit:git-gui[1] should prune remote-tracking branches when
-	performing a fetch. The default value is "false".
-
-gui.trustmtime::
-	Determines if linkgit:git-gui[1] should trust the file modification
-	timestamp or not. By default the timestamps are not trusted.
-
-gui.spellingDictionary::
-	Specifies the dictionary used for spell checking commit messages in
-	the linkgit:git-gui[1]. When set to "none" spell checking is turned
-	off.
-
-gui.fastCopyBlame::
-	If true, 'git gui blame' uses `-C` instead of `-C -C` for original
-	location detection. It makes blame significantly faster on huge
-	repositories at the expense of less thorough copy detection.
-
-gui.copyBlameThreshold::
-	Specifies the threshold to use in 'git gui blame' original location
-	detection, measured in alphanumeric characters. See the
-	linkgit:git-blame[1] manual for more information on copy detection.
-
-gui.blamehistoryctx::
-	Specifies the radius of history context in days to show in
-	linkgit:gitk[1] for the selected commit, when the `Show History
-	Context` menu item is invoked from 'git gui blame'. If this
-	variable is set to zero, the whole history is shown.
+include::gui-config.txt[]
 
 guitool.<name>.cmd::
 	Specifies the shell command line to execute when the corresponding item
@@ -2860,282 +2582,13 @@ protocol.version::
 
 --
 
-pull.ff::
-	By default, Git does not create an extra merge commit when merging
-	a commit that is a descendant of the current commit. Instead, the
-	tip of the current branch is fast-forwarded. When set to `false`,
-	this variable tells Git to create an extra merge commit in such
-	a case (equivalent to giving the `--no-ff` option from the command
-	line). When set to `only`, only such fast-forward merges are
-	allowed (equivalent to giving the `--ff-only` option from the
-	command line). This setting overrides `merge.ff` when pulling.
-
-pull.rebase::
-	When true, rebase branches on top of the fetched branch, instead
-	of merging the default branch from the default remote when "git
-	pull" is run. See "branch.<name>.rebase" for setting this on a
-	per-branch basis.
-+
-When `merges`, pass the `--rebase-merges` option to 'git rebase'
-so that the local merge commits are included in the rebase (see
-linkgit:git-rebase[1] for details).
-+
-When preserve, also pass `--preserve-merges` along to 'git rebase'
-so that locally committed merge commits will not be flattened
-by running 'git pull'.
-+
-When the value is `interactive`, the rebase is run in interactive mode.
-+
-*NOTE*: this is a possibly dangerous operation; do *not* use
-it unless you understand the implications (see linkgit:git-rebase[1]
-for details).
-
-pull.octopus::
-	The default merge strategy to use when pulling multiple branches
-	at once.
-
-pull.twohead::
-	The default merge strategy to use when pulling a single branch.
-
-push.default::
-	Defines the action `git push` should take if no refspec is
-	explicitly given.  Different values are well-suited for
-	specific workflows; for instance, in a purely central workflow
-	(i.e. the fetch source is equal to the push destination),
-	`upstream` is probably what you want.  Possible values are:
-+
---
-
-* `nothing` - do not push anything (error out) unless a refspec is
-  explicitly given. This is primarily meant for people who want to
-  avoid mistakes by always being explicit.
-
-* `current` - push the current branch to update a branch with the same
-  name on the receiving end.  Works in both central and non-central
-  workflows.
-
-* `upstream` - push the current branch back to the branch whose
-  changes are usually integrated into the current branch (which is
-  called `@{upstream}`).  This mode only makes sense if you are
-  pushing to the same repository you would normally pull from
-  (i.e. central workflow).
-
-* `tracking` - This is a deprecated synonym for `upstream`.
+include::pull-config.txt[]
 
-* `simple` - in centralized workflow, work like `upstream` with an
-  added safety to refuse to push if the upstream branch's name is
-  different from the local one.
-+
-When pushing to a remote that is different from the remote you normally
-pull from, work as `current`.  This is the safest option and is suited
-for beginners.
-+
-This mode has become the default in Git 2.0.
-
-* `matching` - push all branches having the same name on both ends.
-  This makes the repository you are pushing to remember the set of
-  branches that will be pushed out (e.g. if you always push 'maint'
-  and 'master' there and no other branches, the repository you push
-  to will have these two branches, and your local 'maint' and
-  'master' will be pushed there).
-+
-To use this mode effectively, you have to make sure _all_ the
-branches you would push out are ready to be pushed out before
-running 'git push', as the whole point of this mode is to allow you
-to push all of the branches in one go.  If you usually finish work
-on only one branch and push out the result, while other branches are
-unfinished, this mode is not for you.  Also this mode is not
-suitable for pushing into a shared central repository, as other
-people may add new branches there, or update the tip of existing
-branches outside your control.
-+
-This used to be the default, but not since Git 2.0 (`simple` is the
-new default).
-
---
-
-push.followTags::
-	If set to true enable `--follow-tags` option by default.  You
-	may override this configuration at time of push by specifying
-	`--no-follow-tags`.
-
-push.gpgSign::
-	May be set to a boolean value, or the string 'if-asked'. A true
-	value causes all pushes to be GPG signed, as if `--signed` is
-	passed to linkgit:git-push[1]. The string 'if-asked' causes
-	pushes to be signed if the server supports it, as if
-	`--signed=if-asked` is passed to 'git push'. A false value may
-	override a value from a lower-priority config file. An explicit
-	command-line flag always overrides this config option.
-
-push.pushOption::
-	When no `--push-option=<option>` argument is given from the
-	command line, `git push` behaves as if each <value> of
-	this variable is given as `--push-option=<value>`.
-+
-This is a multi-valued variable, and an empty value can be used in a
-higher priority configuration file (e.g. `.git/config` in a
-repository) to clear the values inherited from a lower priority
-configuration files (e.g. `$HOME/.gitconfig`).
-+
---
-
-Example:
-
-/etc/gitconfig
-  push.pushoption = a
-  push.pushoption = b
-
-~/.gitconfig
-  push.pushoption = c
-
-repo/.git/config
-  push.pushoption =
-  push.pushoption = b
-
-This will result in only b (a and c are cleared).
-
---
-
-push.recurseSubmodules::
-	Make sure all submodule commits used by the revisions to be pushed
-	are available on a remote-tracking branch. If the value is 'check'
-	then Git will verify that all submodule commits that changed in the
-	revisions to be pushed are available on at least one remote of the
-	submodule. If any commits are missing, the push will be aborted and
-	exit with non-zero status. If the value is 'on-demand' then all
-	submodules that changed in the revisions to be pushed will be
-	pushed. If on-demand was not able to push all necessary revisions
-	it will also be aborted and exit with non-zero status. If the value
-	is 'no' then default behavior of ignoring submodules when pushing
-	is retained. You may override this configuration at time of push by
-	specifying '--recurse-submodules=check|on-demand|no'.
+include::push-config.txt[]
 
 include::rebase-config.txt[]
 
-receive.advertiseAtomic::
-	By default, git-receive-pack will advertise the atomic push
-	capability to its clients. If you don't want to advertise this
-	capability, set this variable to false.
-
-receive.advertisePushOptions::
-	When set to true, git-receive-pack will advertise the push options
-	capability to its clients. False by default.
-
-receive.autogc::
-	By default, git-receive-pack will run "git-gc --auto" after
-	receiving data from git-push and updating refs.  You can stop
-	it by setting this variable to false.
-
-receive.certNonceSeed::
-	By setting this variable to a string, `git receive-pack`
-	will accept a `git push --signed` and verifies it by using
-	a "nonce" protected by HMAC using this string as a secret
-	key.
-
-receive.certNonceSlop::
-	When a `git push --signed` sent a push certificate with a
-	"nonce" that was issued by a receive-pack serving the same
-	repository within this many seconds, export the "nonce"
-	found in the certificate to `GIT_PUSH_CERT_NONCE` to the
-	hooks (instead of what the receive-pack asked the sending
-	side to include).  This may allow writing checks in
-	`pre-receive` and `post-receive` a bit easier.  Instead of
-	checking `GIT_PUSH_CERT_NONCE_SLOP` environment variable
-	that records by how many seconds the nonce is stale to
-	decide if they want to accept the certificate, they only
-	can check `GIT_PUSH_CERT_NONCE_STATUS` is `OK`.
-
-receive.fsckObjects::
-	If it is set to true, git-receive-pack will check all received
-	objects. See `transfer.fsckObjects` for what's checked.
-	Defaults to false. If not set, the value of
-	`transfer.fsckObjects` is used instead.
-
-receive.fsck.<msg-id>::
-	Acts like `fsck.<msg-id>`, but is used by
-	linkgit:git-receive-pack[1] instead of
-	linkgit:git-fsck[1]. See the `fsck.<msg-id>` documentation for
-	details.
-
-receive.fsck.skipList::
-	Acts like `fsck.skipList`, but is used by
-	linkgit:git-receive-pack[1] instead of
-	linkgit:git-fsck[1]. See the `fsck.skipList` documentation for
-	details.
-
-receive.keepAlive::
-	After receiving the pack from the client, `receive-pack` may
-	produce no output (if `--quiet` was specified) while processing
-	the pack, causing some networks to drop the TCP connection.
-	With this option set, if `receive-pack` does not transmit
-	any data in this phase for `receive.keepAlive` seconds, it will
-	send a short keepalive packet.  The default is 5 seconds; set
-	to 0 to disable keepalives entirely.
-
-receive.unpackLimit::
-	If the number of objects received in a push is below this
-	limit then the objects will be unpacked into loose object
-	files. However if the number of received objects equals or
-	exceeds this limit then the received pack will be stored as
-	a pack, after adding any missing delta bases.  Storing the
-	pack from a push can make the push operation complete faster,
-	especially on slow filesystems.  If not set, the value of
-	`transfer.unpackLimit` is used instead.
-
-receive.maxInputSize::
-	If the size of the incoming pack stream is larger than this
-	limit, then git-receive-pack will error out, instead of
-	accepting the pack file. If not set or set to 0, then the size
-	is unlimited.
-
-receive.denyDeletes::
-	If set to true, git-receive-pack will deny a ref update that deletes
-	the ref. Use this to prevent such a ref deletion via a push.
-
-receive.denyDeleteCurrent::
-	If set to true, git-receive-pack will deny a ref update that
-	deletes the currently checked out branch of a non-bare repository.
-
-receive.denyCurrentBranch::
-	If set to true or "refuse", git-receive-pack will deny a ref update
-	to the currently checked out branch of a non-bare repository.
-	Such a push is potentially dangerous because it brings the HEAD
-	out of sync with the index and working tree. If set to "warn",
-	print a warning of such a push to stderr, but allow the push to
-	proceed. If set to false or "ignore", allow such pushes with no
-	message. Defaults to "refuse".
-+
-Another option is "updateInstead" which will update the working
-tree if pushing into the current branch.  This option is
-intended for synchronizing working directories when one side is not easily
-accessible via interactive ssh (e.g. a live web site, hence the requirement
-that the working directory be clean). This mode also comes in handy when
-developing inside a VM to test and fix code on different Operating Systems.
-+
-By default, "updateInstead" will refuse the push if the working tree or
-the index have any difference from the HEAD, but the `push-to-checkout`
-hook can be used to customize this.  See linkgit:githooks[5].
-
-receive.denyNonFastForwards::
-	If set to true, git-receive-pack will deny a ref update which is
-	not a fast-forward. Use this to prevent such an update via a push,
-	even if that push is forced. This configuration variable is
-	set when initializing a shared repository.
-
-receive.hideRefs::
-	This variable is the same as `transfer.hideRefs`, but applies
-	only to `receive-pack` (and so affects pushes, but not fetches).
-	An attempt to update or delete a hidden ref by `git push` is
-	rejected.
-
-receive.updateServerInfo::
-	If set to true, git-receive-pack will run git-update-server-info
-	after receiving data from git-push and updating refs.
-
-receive.shallowUpdate::
-	If set to true, .git/shallow can be updated when new refs
-	require new shallow roots. Otherwise those refs are rejected.
+include::receive-config.txt[]
 
 remote.pushDefault::
 	The remote to push to by default.  Overrides
@@ -3261,71 +2714,15 @@ rerere.enabled::
 	`$GIT_DIR`, e.g. if "rerere" was previously used in the
 	repository.
 
-sendemail.identity::
-	A configuration identity. When given, causes values in the
-	'sendemail.<identity>' subsection to take precedence over
-	values in the 'sendemail' section. The default identity is
-	the value of `sendemail.identity`.
-
-sendemail.smtpEncryption::
-	See linkgit:git-send-email[1] for description.  Note that this
-	setting is not subject to the 'identity' mechanism.
-
-sendemail.smtpssl (deprecated)::
-	Deprecated alias for 'sendemail.smtpEncryption = ssl'.
-
-sendemail.smtpsslcertpath::
-	Path to ca-certificates (either a directory or a single file).
-	Set it to an empty string to disable certificate verification.
-
-sendemail.<identity>.*::
-	Identity-specific versions of the 'sendemail.*' parameters
-	found below, taking precedence over those when this
-	identity is selected, through either the command-line or
-	`sendemail.identity`.
-
-sendemail.aliasesFile::
-sendemail.aliasFileType::
-sendemail.annotate::
-sendemail.bcc::
-sendemail.cc::
-sendemail.ccCmd::
-sendemail.chainReplyTo::
-sendemail.confirm::
-sendemail.envelopeSender::
-sendemail.from::
-sendemail.multiEdit::
-sendemail.signedoffbycc::
-sendemail.smtpPass::
-sendemail.suppresscc::
-sendemail.suppressFrom::
-sendemail.to::
-sendemail.tocmd::
-sendemail.smtpDomain::
-sendemail.smtpServer::
-sendemail.smtpServerPort::
-sendemail.smtpServerOption::
-sendemail.smtpUser::
-sendemail.thread::
-sendemail.transferEncoding::
-sendemail.validate::
-sendemail.xmailer::
-	See linkgit:git-send-email[1] for description.
-
-sendemail.signedoffcc (deprecated)::
-	Deprecated alias for `sendemail.signedoffbycc`.
-
-sendemail.smtpBatchSize::
-	Number of messages to be sent per connection, after that a relogin
-	will happen.  If the value is 0 or undefined, send all messages in
-	one connection.
-	See also the `--batch-size` option of linkgit:git-send-email[1].
-
-sendemail.smtpReloginDelay::
-	Seconds wait before reconnecting to smtp server.
-	See also the `--relogin-delay` option of linkgit:git-send-email[1].
-
-showbranch.default::
+include::sendemail-config.txt[]
+
+sequence.editor::
+	Text editor used by `git rebase -i` for editing the rebase instruction file.
+	The value is meant to be interpreted by the shell when it is used.
+	It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable.
+	When not configured the default commit message editor is used instead.
+
+showBranch.default::
 	The default set of branches for linkgit:git-show-branch[1].
 	See linkgit:git-show-branch[1].
 
@@ -3437,88 +2834,7 @@ stash.showStat::
 	option will show diffstat of the stash entry.  Defaults to true.
 	See description of 'show' command in linkgit:git-stash[1].
 
-submodule.<name>.url::
-	The URL for a submodule. This variable is copied from the .gitmodules
-	file to the git config via 'git submodule init'. The user can change
-	the configured URL before obtaining the submodule via 'git submodule
-	update'. If neither submodule.<name>.active or submodule.active are
-	set, the presence of this variable is used as a fallback to indicate
-	whether the submodule is of interest to git commands.
-	See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
-
-submodule.<name>.update::
-	The method by which a submodule is updated by 'git submodule update',
-	which is the only affected command, others such as
-	'git checkout --recurse-submodules' are unaffected. It exists for
-	historical reasons, when 'git submodule' was the only command to
-	interact with submodules; settings like `submodule.active`
-	and `pull.rebase` are more specific. It is populated by
-	`git submodule init` from the linkgit:gitmodules[5] file.
-	See description of 'update' command in linkgit:git-submodule[1].
-
-submodule.<name>.branch::
-	The remote branch name for a submodule, used by `git submodule
-	update --remote`.  Set this option to override the value found in
-	the `.gitmodules` file.  See linkgit:git-submodule[1] and
-	linkgit:gitmodules[5] for details.
-
-submodule.<name>.fetchRecurseSubmodules::
-	This option can be used to control recursive fetching of this
-	submodule. It can be overridden by using the --[no-]recurse-submodules
-	command-line option to "git fetch" and "git pull".
-	This setting will override that from in the linkgit:gitmodules[5]
-	file.
-
-submodule.<name>.ignore::
-	Defines under what circumstances "git status" and the diff family show
-	a submodule as modified. When set to "all", it will never be considered
-	modified (but it will nonetheless show up in the output of status and
-	commit when it has been staged), "dirty" will ignore all changes
-	to the submodules work tree and
-	takes only differences between the HEAD of the submodule and the commit
-	recorded in the superproject into account. "untracked" will additionally
-	let submodules with modified tracked files in their work tree show up.
-	Using "none" (the default when this option is not set) also shows
-	submodules that have untracked files in their work tree as changed.
-	This setting overrides any setting made in .gitmodules for this submodule,
-	both settings can be overridden on the command line by using the
-	"--ignore-submodules" option. The 'git submodule' commands are not
-	affected by this setting.
-
-submodule.<name>.active::
-	Boolean value indicating if the submodule is of interest to git
-	commands.  This config option takes precedence over the
-	submodule.active config option. See linkgit:gitsubmodules[7] for
-	details.
-
-submodule.active::
-	A repeated field which contains a pathspec used to match against a
-	submodule's path to determine if the submodule is of interest to git
-	commands. See linkgit:gitsubmodules[7] for details.
-
-submodule.recurse::
-	Specifies if commands recurse into submodules by default. This
-	applies to all commands that have a `--recurse-submodules` option,
-	except `clone`.
-	Defaults to false.
-
-submodule.fetchJobs::
-	Specifies how many submodules are fetched/cloned at the same time.
-	A positive integer allows up to that number of submodules fetched
-	in parallel. A value of 0 will give some reasonable default.
-	If unset, it defaults to 1.
-
-submodule.alternateLocation::
-	Specifies how the submodules obtain alternates when submodules are
-	cloned. Possible values are `no`, `superproject`.
-	By default `no` is assumed, which doesn't add references. When the
-	value is set to `superproject` the submodule to be cloned computes
-	its alternates location relative to the superprojects alternate.
-
-submodule.alternateErrorStrategy::
-	Specifies how to treat errors with the alternates for a submodule
-	as computed via `submodule.alternateLocation`. Possible values are
-	`ignore`, `info`, `die`. Default is `die`.
+include::submodule-config.txt[]
 
 tag.forceSignAnnotated::
 	A boolean to specify whether annotated tags created should be GPG signed.