remove xfs/096

This test exercises mkfs error handling before strict validation was added
and thus is useless for xfsprogs > 4.5.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Zorro Lang <zlang@kernel.org>

5 files changed, 0 insertions, 241 deletions

diff --git a/.gitignore b/.gitignore
index 18815b35fd..b5f1516260 100644
--- a/.gitignore
+++ b/.gitignore
@@ -212,7 +212,6 @@ tags
 /tests/generic/050.out
 /tests/xfs/033.out
 /tests/xfs/071.out
-/tests/xfs/096.out
 /tests/xfs/216.out
 
 # cscope files
diff --git a/common/xfs b/common/xfs
index 57d21762ce..49ca5a2d52 100644
--- a/common/xfs
+++ b/common/xfs
@@ -1211,15 +1211,6 @@ _require_xfs_mkfs_validation()
 	fi
 }
 
-# The opposite of _require_xfs_mkfs_validation.
-_require_xfs_mkfs_without_validation()
-{
-	_xfs_mkfs_validation_check
-	if [ "$?" -ne 0 ]; then
-		_notrun "Requires older mkfs without strict input checks: the last supported version of xfsprogs is 4.5."
-	fi
-}
-
 _require_scratch_xfs_shrink()
 {
 	_require_scratch
diff --git a/tests/xfs/096 b/tests/xfs/096
deleted file mode 100755
index a7a5444f8c..0000000000
--- a/tests/xfs/096
+++ /dev/null
@@ -1,130 +0,0 @@
-#! /bin/bash
-# SPDX-License-Identifier: GPL-2.0
-# Copyright (c) 2000-2004 Silicon Graphics, Inc.  All Rights Reserved.
-#
-# FS QA Test No. 096
-#
-# test out mkfs_xfs output on IRIX/Linux and some of its error handling
-# ensure pv#920679 is addressed
-#
-seqfull=$0
-. ./common/preamble
-_begin_fstest mkfs v2log auto quick
-
-# Import common functions.
-. ./common/filter
-. ./common/log
-
-#
-# filter out counts which will vary
-#   - extsz, blocks, agsize, agcount, device name, rtextents
-#   - log version varies for crc enabled fs
-#   - lsunit varies for 512/4k sector devices
-# filter out differences between linux and irix:
-#   - sectsz on Linux
-#   - mmr, mixed-case on IRIX
-#   - lazy-count on IRIX
-#   - inode-paths on IRIX
-#   - trailing spaces on Linux but not on IRIX
-#
-# Example output:
-#  meta-data=DEV isize=256    agcount=N, agsize=N blks
-#  data     =                       bsize=4096   blocks=N, imaxpct=25
-#           =                       sunit=65     swidth=65 blks, unwritten=1
-#  naming   =version 2              bsize=4096
-#  log      =internal log           bsize=4096   blocks=N, version=1
-#           =                       sunit=0 blks
-#  realtime =none                   extsz=65536  blocks=N, rtextents=N
-#
-mkfs_filter()
-{
-   tee -a $seqres.full | \
-   sed \
-	-e 's/extsz=[0-9][0-9]*[ ]*/extsz=N, /' \
-	-e 's/blocks=[0-9][0-9]*/blocks=N/' \
-	-e 's/imaxpct=[0-9][0-9]*/imaxpct=N/' \
-	-e 's/agsize=[0-9][0-9]*/agsize=N/' \
-	-e 's/agcount=[0-9][0-9]*/agcount=N/' \
-        -e 's/swidth=[0-9][0-9]* blks$/&, unwritten=1/' \
-	-e 's/rtextents=[0-9][0-9]*/rtextents=N/' \
-	-e 's/meta-data=[^ ]*/meta-data=DEV/' \
-        -e 's/ *isize=[0-9]* / isize=N /' \
-	-e '/ *= *sectsz=[0-9][0-9]* *attr=[0-9][0-9]*.*$/d' \
-	-e '/ *= *mmr=[0-9][0-9]* *$/d' \
-	-e 's/ *mixed-case=[YN]//' \
-	-e 's/ *ascii-ci=[01]//' \
-	-e 's/\(version=\)\([12]\)/\1N/' \
-	-e 's/\(sunit=\)\([018] blks\)/\1N blks/' \
-	-e 's/sectsz=[0-9][0-9]* *//' \
-	-e 's/, lazy-count.*//' \
-	-e '/inode-paths/d' \
-	-e 's/\(log[ 	]*=\).*bsize/\1LOG                    bsize/' \
-	-e 's/\(realtime[ 	]*=\).*extsz/\1REALTIME               extsz/' \
-	-e '/.*crc=/d' \
-	-e 's/ *$//' \
-	-e 's/ ftype=[01]//' \
-	-e '/^log stripe unit.*too large/d' \
-	-e '/^log stripe unit adjusted/d' \
-	-e '/Discarding/d' \
-   | grep -v parent
-}
-
-# real QA test starts here
-
-# Modify as appropriate.
-_supported_fs xfs
-_require_scratch
-_require_v2log
-_require_xfs_mkfs_without_validation
-
-# choose .out file based on internal/external log
-rm -f $seqfull.out
-if [ "$USE_EXTERNAL" = yes ]; then
-	ln -s $seq.out.external $seqfull.out
-else
-	ln -s $seq.out.internal $seqfull.out
-fi
-
-# maximum log record size
-max_lr_size=`expr 256 \* 1024`
-
-big_su=`expr $max_lr_size + 4096`
-
-#
-# Test out various mkfs param combinations
-#
-cat >$tmp.seq.params <<EOF
-# su too big but must be a multiple of fs block size too
-  -l version=2,su=`expr $max_lr_size + 512`
-# test log stripe greater than LR size
-  -l version=2,su=$big_su
-# same test but get log stripe from data stripe
-  -l version=2 -d su=$big_su,sw=1
-# test out data stripe
-  -m crc=0 -l version=1 -d su=$big_su,sw=1
-# test out data stripe the same but using sunit & swidth
-  -m crc=0 -l version=1 -d sunit=`expr $big_su / 512`,swidth=`expr $big_su / 512`
-EOF
-
-#
-# call mkfs in a loop for various params
-#
-echo ""
-cat $tmp.seq.params \
-| while read mkfs
-do
-    if echo $mkfs | grep -q '^#'; then
-        # print out header & ignore comment
-	echo $mkfs
-	continue
-    fi
-    echo "--- mkfs=$mkfs ---"
-    export MKFS_OPTIONS="$mkfs"
-    _scratch_mkfs_xfs 2>&1 | mkfs_filter
-    echo ""
-    echo ""
-done
-
-# success, all done
-status=0
-exit
diff --git a/tests/xfs/096.out.external b/tests/xfs/096.out.external
deleted file mode 100644
index 3122330ace..0000000000
--- a/tests/xfs/096.out.external
+++ /dev/null
@@ -1,50 +0,0 @@
-QA output created by 096
-
-# su too big but must be a multiple of fs block size too
---- mkfs=-l version=2,su=262656 ---
-log stripe unit (262656) must be a multiple of the block size (4096)
-
-
-# test log stripe greater than LR size
---- mkfs=-l version=2,su=266240 ---
-meta-data=DEV isize=N      agcount=N, agsize=N blks
-data     =                       bsize=4096   blocks=N, imaxpct=N
-         =                       sunit=0      swidth=0 blks, unwritten=1
-naming   =version 2              bsize=4096
-log      =LOG                    bsize=4096   blocks=N, version=N
-realtime =REALTIME               extsz=N, blocks=N, rtextents=N
-
-
-# same test but get log stripe from data stripe
---- mkfs=-l version=2 -d su=266240,sw=1 ---
-meta-data=DEV isize=N      agcount=N, agsize=N blks
-data     =                       bsize=4096   blocks=N, imaxpct=N
-         =                       sunit=65     swidth=65 blks, unwritten=1
-naming   =version 2              bsize=4096
-log      =LOG                    bsize=4096   blocks=N, version=N
-         =                       sunit=N blks
-realtime =REALTIME               extsz=N, blocks=N, rtextents=N
-
-
-# test out data stripe
---- mkfs=-m crc=0 -l version=1 -d su=266240,sw=1 ---
-meta-data=DEV isize=N      agcount=N, agsize=N blks
-data     =                       bsize=4096   blocks=N, imaxpct=N
-         =                       sunit=65     swidth=65 blks, unwritten=1
-naming   =version 2              bsize=4096
-log      =LOG                    bsize=4096   blocks=N, version=N
-         =                       sunit=N blks
-realtime =REALTIME               extsz=N, blocks=N, rtextents=N
-
-
-# test out data stripe the same but using sunit & swidth
---- mkfs=-m crc=0 -l version=1 -d sunit=520,swidth=520 ---
-meta-data=DEV isize=N      agcount=N, agsize=N blks
-data     =                       bsize=4096   blocks=N, imaxpct=N
-         =                       sunit=65     swidth=65 blks, unwritten=1
-naming   =version 2              bsize=4096
-log      =LOG                    bsize=4096   blocks=N, version=N
-         =                       sunit=N blks
-realtime =REALTIME               extsz=N, blocks=N, rtextents=N
-
-
diff --git a/tests/xfs/096.out.internal b/tests/xfs/096.out.internal
deleted file mode 100644
index 80201d25bd..0000000000
--- a/tests/xfs/096.out.internal
+++ /dev/null
@@ -1,51 +0,0 @@
-QA output created by 096
-
-# su too big but must be a multiple of fs block size too
---- mkfs=-l version=2,su=262656 ---
-log stripe unit (262656) must be a multiple of the block size (4096)
-
-
-# test log stripe greater than LR size
---- mkfs=-l version=2,su=266240 ---
-meta-data=DEV isize=N    agcount=N, agsize=N blks
-data     =                       bsize=4096   blocks=N, imaxpct=N
-         =                       sunit=0      swidth=0 blks, unwritten=1
-naming   =version 2              bsize=4096
-log      =LOG                    bsize=4096   blocks=N, version=N
-         =                       sunit=N blks
-realtime =REALTIME               extsz=N, blocks=N, rtextents=N
-
-
-# same test but get log stripe from data stripe
---- mkfs=-l version=2 -d su=266240,sw=1 ---
-meta-data=DEV isize=N    agcount=N, agsize=N blks
-data     =                       bsize=4096   blocks=N, imaxpct=N
-         =                       sunit=65     swidth=65 blks, unwritten=1
-naming   =version 2              bsize=4096
-log      =LOG                    bsize=4096   blocks=N, version=N
-         =                       sunit=N blks
-realtime =REALTIME               extsz=N, blocks=N, rtextents=N
-
-
-# test out data stripe
---- mkfs=-m crc=0 -l version=1 -d su=266240,sw=1 ---
-meta-data=DEV isize=N    agcount=N, agsize=N blks
-data     =                       bsize=4096   blocks=N, imaxpct=N
-         =                       sunit=65     swidth=65 blks, unwritten=1
-naming   =version 2              bsize=4096
-log      =LOG                    bsize=4096   blocks=N, version=N
-         =                       sunit=N blks
-realtime =REALTIME               extsz=N, blocks=N, rtextents=N
-
-
-# test out data stripe the same but using sunit & swidth
---- mkfs=-m crc=0 -l version=1 -d sunit=520,swidth=520 ---
-meta-data=DEV isize=N    agcount=N, agsize=N blks
-data     =                       bsize=4096   blocks=N, imaxpct=N
-         =                       sunit=65     swidth=65 blks, unwritten=1
-naming   =version 2              bsize=4096
-log      =LOG                    bsize=4096   blocks=N, version=N
-         =                       sunit=N blks
-realtime =REALTIME               extsz=N, blocks=N, rtextents=N
-
-